pm_runtime_get_() increments the runtime PM usage counter even
when it returns an error code, thus a matching decrement is needed on
the error handling path to keep the counter balanced.
Signed-off-by: Yongzhi Liu <lyz_cs@pku.edu.cn>
Link: https://lore.kernel.org/r/1642311296-87020-1-git-send-email-lyz_cs@pku.edu.cn
Signed-off-by: Vinod Koul <vkoul@kernel.org>
As the possible failure of the dma_set_max_seg_size(), it should be
better to check the return value of the dma_set_max_seg_size().
Fixes: 97d49c59e2 ("dmaengine: rcar-dmac: set scatter/gather max segment size")
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20220111011239.452837-1-jiasheng@iscas.ac.cn
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The pm_runtime_enable will increase power disable depth.
If the probe fails, we should use pm_runtime_disable() to balance
pm_runtime_enable().
Fixes: 4f3ceca254 ("dmaengine: stm32-dmamux: Add PM Runtime support")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Link: https://lore.kernel.org/r/20220108085336.11992-1-linmq006@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Because of the possible failure of the dma_supported(), the
dma_set_mask_and_coherent() may return error num.
Therefore, it should be better to check it and return the error if
fails.
Fixes: dc312349e8 ("dmaengine: rcar-dmac: Widen DMA mask to 40 bits")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20220106030939.2644320-1-jiasheng@iscas.ac.cn
Signed-off-by: Vinod Koul <vkoul@kernel.org>
In order to free resources correctly in the error handling path of
pt_core_init(), 2 goto's have to be switched. Otherwise, some resources
will leak and we will try to release things that have not been allocated
yet.
Also move a dev_err() to a place where it is more meaningful.
Fixes: fa5d823b16 ("dmaengine: ptdma: Initial driver for the AMD PTDMA")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Sanjay R Mehta <sanju.mehta@amd.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/41a963a35173f89c874f5c44df5530dc09fea8da.1644044244.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Vinod Koul <vkoul@kernel.org>
New support:
- DMA_MEMCPY_SG support is bought back as we have a user in Xilinx driver
- Support for TI J721S2 SoC in k3-udma driver
- Support for Ingenic MDMA and BDMA in the JZ4760
- Support for Renesas r8a779f0 dmac
Updates:
- We are finally getting rid of slave_id, so this brings in the changes
across tree for that using tag dmaengine_topic_slave_id_removal_5.17
- updates for idxd driver
- at_xdmac driver cleanup
-----BEGIN PGP SIGNATURE-----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=1KYH
-----END PGP SIGNATURE-----
Merge tag 'dmaengine-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine updates from Vinod Koul:
"A bunch of new support and few updates to drivers:
New support:
- DMA_MEMCPY_SG support is bought back as we have a user in Xilinx
driver
- Support for TI J721S2 SoC in k3-udma driver
- Support for Ingenic MDMA and BDMA in the JZ4760
- Support for Renesas r8a779f0 dmac
Updates:
- We are finally getting rid of slave_id, so this brings in the
changes across tree for that
- updates for idxd driver
- at_xdmac driver cleanup"
* tag 'dmaengine-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (60 commits)
dt-bindings: dma-controller: Split interrupt fields in example
dmaengine: pch_dma: Remove usage of the deprecated "pci-dma-compat.h" API
dmaengine: at_xdmac: Fix race over irq_status
dmaengine: at_xdmac: Remove a level of indentation in at_xdmac_tasklet()
dmaengine: at_xdmac: Fix at_xdmac_lld struct definition
dmaengine: at_xdmac: Fix lld view setting
dmaengine: at_xdmac: Remove a level of indentation in at_xdmac_advance_work()
dmaengine: at_xdmac: Fix concurrency over xfers_list
dmaengine: at_xdmac: Move the free desc to the tail of the desc list
dmaengine: at_xdmac: Fix race for the tx desc callback
dmaengine: at_xdmac: Fix concurrency over chan's completed_cookie
dmaengine: at_xdmac: Print debug message after realeasing the lock
dmaengine: at_xdmac: Start transfer for cyclic channels in issue_pending
dmaengine: at_xdmac: Don't start transactions at tx_submit level
dmaengine: idxd: deprecate token sysfs attributes for read buffers
dmaengine: idxd: change bandwidth token to read buffers
dmaengine: idxd: fix wq settings post wq disable
dmaengine: idxd: change MSIX allocation based on per wq activation
dmaengine: idxd: fix descriptor flushing locking
dmaengine: idxd: embed irq_entry in idxd_wq struct
...
It's a relatively calm development cycle, but still lots of updates in
the driver side like Intel SOF. Below are some highlights:
* ALSA / ASoC core:
- A new kselftest for ALSA control API
- PCM NO_REWINDS support
- Potential race fixes around control removals
- Unify x86 SG-buffer memory allocation code
- Cleanups and race fixes for ASoC DPCM locking
* ASoC:
- Refinements and cleanups around the delay() APIs
- Wider use of dev_err_probe().
- Continuing cleanups and improvements to the SOF code
- Support for pin switches in simple-card derived cards
- Support for AMD Renoir ACP, Asahi Kasei Microdevices AKM4375, Intel
systems using NAU8825 and MAX98390, Mediatek MT8915, nVidia Tegra20
S/PDIF, Qualcomm systems using ALC5682I-VS and Texas Instruments
TLV320ADC3xxx
* HD-audio / USB-audio:
- Fix deadlock at HD-audio codec unbinding
- Fixes for Tegra194 HD-audio, new HDA support for CS35L41 codec
- Quirks for Lenovo and HP machines, Gigabyte mobo, Bose device
* Misc:
- Fix virmidi drain behavior
Note that the merge of CS35L41 codec support is still half-baked, and
at least one ACPI change is missing. Although this won't hinder the
kernel build itself, we're going to catch up before RC1.
-----BEGIN PGP SIGNATURE-----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=csTR
-----END PGP SIGNATURE-----
Merge tag 'sound-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"It's a relatively calm development cycle, but still lots of updates in
the driver side like Intel SOF. Below are some highlights:
ALSA / ASoC core:
- A new kselftest for ALSA control API
- PCM NO_REWINDS support
- Potential race fixes around control removals
- Unify x86 SG-buffer memory allocation code
- Cleanups and race fixes for ASoC DPCM locking
ASoC:
- Refinements and cleanups around the delay() APIs
- Wider use of dev_err_probe().
- Continuing cleanups and improvements to the SOF code
- Support for pin switches in simple-card derived cards
- Support for AMD Renoir ACP, Asahi Kasei Microdevices AKM4375, Intel
systems using NAU8825 and MAX98390, Mediatek MT8915, nVidia Tegra20
S/PDIF, Qualcomm systems using ALC5682I-VS and Texas Instruments
TLV320ADC3xxx
HD-audio / USB-audio:
- Fix deadlock at HD-audio codec unbinding
- Fixes for Tegra194 HD-audio, new HDA support for CS35L41 codec
- Quirks for Lenovo and HP machines, Gigabyte mobo, Bose device
Misc:
- Fix virmidi drain behavior
Note that the merge of CS35L41 codec support is still half-baked, and
at least one ACPI change is missing. Although this won't hinder the
kernel build itself, we're going to catch up before RC1"
* tag 'sound-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (415 commits)
ALSA: hda: intel-dsp-config: reorder the config table
ALSA: hda: intel-dsp-config: add JasperLake support
ALSA: hda: cs35l41: fix double free on error in probe()
ALSA: hda: Fix dependencies of CS35L41 on SPI/I2C buses
ALSA: hda: Fix dependency on ASoC cs35l41 codec
ASoC: cs35l41: Add support for hibernate memory retention mode
ASoC: cs35l41: Update handling of test key registers
ALSA: intel_hdmi: Check for error num after setting mask
ASoC: wcd9335: Keep a RX port value for each SLIM RX mux
ASoC: amd: acp: acp-mach: Change default RT1019 amp dev id
ALSA: virmidi: Remove duplicated code
ALSA: seq: virmidi: Add a drain operation
ASoC: topology: Fix typo
ASoC: fsl_asrc: refine the check of available clock divider
ASoC: Intel: bytcr_rt5640: Add support for external GPIO jack-detect
ASoC: Intel: bytcr_rt5640: Support retrieving the codec IRQ from the AMCR0F28 ACPI dev
ASoC: rt5640: Add support for boards with an external jack-detect GPIO
ASoC: rt5640: Allow snd_soc_component_set_jack() to override the codec IRQ
ASoC: rt5640: Change jack_work to a delayed_work
ASoC: rt5640: Fix possible NULL pointer deref on resume
...
Treewide cleanup and consolidation of MSI interrupt handling in
preparation for further changes in this area which are necessary to:
- address existing shortcomings in the VFIO area
- support the upcoming Interrupt Message Store functionality which
decouples the message store from the PCI config/MMIO space
-----BEGIN PGP SIGNATURE-----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=vKzd
-----END PGP SIGNATURE-----
Merge tag 'irq-msi-2022-01-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull MSI irq updates from Thomas Gleixner:
"Rework of the MSI interrupt infrastructure.
This is a treewide cleanup and consolidation of MSI interrupt handling
in preparation for further changes in this area which are necessary
to:
- address existing shortcomings in the VFIO area
- support the upcoming Interrupt Message Store functionality which
decouples the message store from the PCI config/MMIO space"
* tag 'irq-msi-2022-01-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (94 commits)
genirq/msi: Populate sysfs entry only once
PCI/MSI: Unbreak pci_irq_get_affinity()
genirq/msi: Convert storage to xarray
genirq/msi: Simplify sysfs handling
genirq/msi: Add abuse prevention comment to msi header
genirq/msi: Mop up old interfaces
genirq/msi: Convert to new functions
genirq/msi: Make interrupt allocation less convoluted
platform-msi: Simplify platform device MSI code
platform-msi: Let core code handle MSI descriptors
bus: fsl-mc-msi: Simplify MSI descriptor handling
soc: ti: ti_sci_inta_msi: Remove ti_sci_inta_msi_domain_free_irqs()
soc: ti: ti_sci_inta_msi: Rework MSI descriptor allocation
NTB/msi: Convert to msi_on_each_desc()
PCI: hv: Rework MSI handling
powerpc/mpic_u3msi: Use msi_for_each-desc()
powerpc/fsl_msi: Use msi_for_each_desc()
powerpc/pasemi/msi: Convert to msi_on_each_dec()
powerpc/cell/axon_msi: Convert to msi_on_each_desc()
powerpc/4xx/hsta: Rework MSI handling
...
Tasklets run with interrupts enabled, so we need to protect
atchan->irq_status with spin_lock_irq() otherwise the tasklet can be
interrupted by the IRQ that modifies irq_status. Move the dev_dbg that
prints the irq_status in at_xdmac_handle_cyclic() and lower in
at_xdmac_tasklet() where the IRQ is disabled.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Link: https://lore.kernel.org/r/20211215110115.191749-13-tudor.ambarus@microchip.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Apart of making the code easier to read, this patch is a prerequisite for
a functional change: tasklets run with interrupts enabled, so we need to
protect atchan->irq_status with spin_lock_irq() otherwise the tasklet can
be interrupted by the IRQ that modifies irq_status. atchan->irq_status
will be protected in a further patch.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Link: https://lore.kernel.org/r/20211215110115.191749-12-tudor.ambarus@microchip.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The hardware channel next descriptor view structure contains just
fields of 32 bits, while dma_addr_t can be of type u64 or u32
depending on CONFIG_ARCH_DMA_ADDR_T_64BIT. Force u32 to comply with
what the hardware expects.
Fixes: e1f7c9eee7 ("dmaengine: at_xdmac: creation of the atmel eXtended DMA Controller driver")
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Link: https://lore.kernel.org/r/20211215110115.191749-11-tudor.ambarus@microchip.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
AT_XDMAC_CNDC_NDVIEW_NDV3 was set even for AT_XDMAC_MBR_UBC_NDV2,
because of the wrong bit handling. Fix it.
Fixes: ee0fe35c8d ("dmaengine: xdmac: Handle descriptor's view 3 registers")
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Link: https://lore.kernel.org/r/20211215110115.191749-10-tudor.ambarus@microchip.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
It's easier to read code with fewer levels of indentation, remove a level
of indentation in at_xdmac_advance_work()
if (!foo() & !bar()) {
}
was replaced by:
if (foo() || bar())
return;
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Link: https://lore.kernel.org/r/20211215110115.191749-9-tudor.ambarus@microchip.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Since tx_submit can be called from a hard IRQ, xfers_list must be
protected with a lock to avoid concurency on the list's elements.
Since at_xdmac_handle_cyclic() is called from a tasklet, spin_lock_irq
is enough to protect from a hard IRQ.
Fixes: e1f7c9eee7 ("dmaengine: at_xdmac: creation of the atmel eXtended DMA Controller driver")
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Link: https://lore.kernel.org/r/20211215110115.191749-8-tudor.ambarus@microchip.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Move the free desc to the tail of the list, so that the sequence of
descriptors is more track-able in case of debug. One would know which
descriptor should come next and could easier catch concurrency over
descriptors for example. virt-dma uses list_splice_tail_init() as well,
follow the core driver.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Link: https://lore.kernel.org/r/20211215110115.191749-7-tudor.ambarus@microchip.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The transfer descriptors were wrongly moved to the free descriptors list
before calling the tx desc callback. As the DMA engine drivers drop any
locks before calling the callback function, txd could be taken again,
resulting in its callback called prematurely. Fix the race for the tx desc
callback by moving the xfer desc into the free desc list after the
callback is invoked.
Fixes: e1f7c9eee7 ("dmaengine: at_xdmac: creation of the atmel eXtended DMA Controller driver")
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Link: https://lore.kernel.org/r/20211215110115.191749-6-tudor.ambarus@microchip.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Caller of dma_cookie_complete is expected to hold a lock to prevent
concurrency over the channel's completed cookie marker. Call
dma_cookie_complete() with the lock held.
Fixes: e1f7c9eee7 ("dmaengine: at_xdmac: creation of the atmel eXtended DMA Controller driver")
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Link: https://lore.kernel.org/r/20211215110115.191749-5-tudor.ambarus@microchip.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
It is desirable to do the prints without the lock held if possible, so
move the print after the lock is released.
Fixes: e1f7c9eee7 ("dmaengine: at_xdmac: creation of the atmel eXtended DMA Controller driver")
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Link: https://lore.kernel.org/r/20211215110115.191749-4-tudor.ambarus@microchip.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Cyclic channels must too call issue_pending in order to start a transfer.
Start the transfer in issue_pending regardless of the type of channel.
This wrongly worked before, because in the past the transfer was started
at tx_submit level when only a desc in the transfer list.
Fixes: e1f7c9eee7 ("dmaengine: at_xdmac: creation of the atmel eXtended DMA Controller driver")
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Link: https://lore.kernel.org/r/20211215110115.191749-3-tudor.ambarus@microchip.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
tx_submit is supposed to push the current transaction descriptor to a
pending queue, waiting for issue_pending() to be called. issue_pending()
must start the transfer, not tx_submit(), thus remove
at_xdmac_start_xfer() from at_xdmac_tx_submit(). Clients of at_xdmac that
assume that tx_submit() starts the transfer must be updated and call
dma_async_issue_pending() if they miss to call it (one example is
atmel_serial).
As the at_xdmac_start_xfer() is now called only from
at_xdmac_advance_work() when !at_xdmac_chan_is_enabled(), the
at_xdmac_chan_is_enabled() check is no longer needed in
at_xdmac_start_xfer(), thus remove it.
Fixes: e1f7c9eee7 ("dmaengine: at_xdmac: creation of the atmel eXtended DMA Controller driver")
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Link: https://lore.kernel.org/r/20211215110115.191749-2-tudor.ambarus@microchip.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The following sysfs attributes will be obsolete due to the name change of
tokens to read buffers:
max_tokens
token_limit
group/tokens_allowed
group/tokens_reserved
group/use_token_limit
Create new entries and have old entry print warning of deprecation.
New attributes to replace the token ones:
max_read_buffers
read_buffer_limit
group/read_buffers_allowed
group/read_buffers_reserved
group/use_read_buffer_limit
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/163951339488.2988321.2424012059911316373.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
DSA spec v1.2 has changed the term of "bandwidth tokens" to "read buffers"
in order to make the concept clearer. Deprecate bandwidth token
naming in the driver and convert to read buffers in order to match with
the spec and reduce confusion when reading the spec.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/163951338932.2988321.6162640806935567317.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
By the spec, wq size and group association is not changeable unless device
is disabled. Exclude clearing the shadow copy on wq disable/reset. This
allows wq type to be changed after disable to be re-enabled.
Move the size and group association to its own cleanup and only call it
during device disable.
Fixes: 0dcfe41e9a ("dmanegine: idxd: cleanup all device related bits after disabling device")
Reported-by: Lucas Van <lucas.van@intel.com>
Tested-by: Lucas Van <lucas.van@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/163951291732.2987775.13576571320501115257.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Change the driver where WQ interrupt is requested only when wq is being
enabled. This new scheme set things up so that request_threaded_irq() is
only called when a kernel wq type is being enabled. This also sets up for
future interrupt request where different interrupt handler such as wq
occupancy interrupt can be setup instead of the wq completion interrupt.
Not calling request_irq() until the WQ actually needs an irq also prevents
wasting of CPU irq vectors on x86 systems, which is a limited resource.
idxd_flush_pending_descs() is moved to device.c since descriptor flushing
is now part of wq disable rather than shutdown().
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/163942149487.2412839.6691222855803875848.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The descriptor flushing for shutdown is not holding the irq_entry list
lock. If there's ongoing interrupt completion handling, this can corrupt
the list. Add locking to protect list walking. Also refactor the code so
it's more compact.
Fixes: 8f47d1a5e5 ("dmaengine: idxd: connect idxd to dmaengine subsystem")
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/163942148935.2412839.18282664745572777280.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
With irq_entry already being associated with the wq in a 1:1 relationship,
embed the irq_entry in the idxd_wq struct and remove back pointers for
idxe_wq and idxd_device. In the process of this work, clean up the interrupt
handle assignment so that there's no decision to be made during submit
call on where interrupt handle value comes from. Set the interrupt handle
during irq request initialization time.
irq_entry 0 is designated as special and is tied to the device itself.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/163942148362.2412839.12055447853311267866.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
There are currently 2 ways to create a set of sysfs files for a
kobj_type, through the default_attrs field, and the default_groups
field. Move the ioatdma sysfs code to use default_groups field which has
been the preferred way since aa30f47cf6 ("kobject: Add support for
default attribute groups to kobj_type") so that we can soon get rid of
the obsolete default_attrs field.
Cc: Vinod Koul <vkoul@kernel.org>
Cc: dmaengine@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20220104163330.1338824-1-gregkh@linuxfoundation.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The variables src_addr and dst_addr handle DMA addresses, so these should
be declared as dma_addr_t.
Fixes: 667b925144 ("dmaengine: uniphier-xdmac: Add UniPhier external DMA controller driver")
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Link: https://lore.kernel.org/r/1639456963-10232-1-git-send-email-hayashi.kunihiko@socionext.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add support for R-Car S4-8. We can reuse R-Car V3U code so that
renames variable names as "gen4".
Note that some registers of R-Car V3U do not exist on R-Car S4-8,
but none of them are used by the driver for now.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20211222114507.1252947-3-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Tag for dmaengine slave_id removal topic branch which should be merged
into v5.17
-----BEGIN PGP SIGNATURE-----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=Mpf8
-----END PGP SIGNATURE-----
Merge tag 'dmaengine_topic_slave_id_removal_5.17' into next
Merge the tag dmaengine_topic_slave_id_removal_5.17 into next. This
brings in the slave_id removal topic changes
'shdma_slave_used' is a bitmap. So use 'bitmap_zalloc()' to simplify code,
improve the semantic and avoid some open-coded arithmetic in allocator
arguments.
Also change the corresponding 'kfree()' into 'bitmap_free()' to keep
consistency.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/3efaf2784424ae3d7411dc47f8b6b03e7bb8c059.1637702701.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The pointer hwdesc is being initialized with a value that is never
read, it is being updated later in a for-loop. The assignment is
redundant and can be removed.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Link: https://lore.kernel.org/r/20211204140032.548066-1-colin.i.king@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add a sysfs knob to allow tuning of retries for the kernel ENQCMDS
descriptor submission. While on host, it is not as likely that ENQCMDS
return busy during normal operations due to the driver controlling the
number of descriptors allocated for submission. However, when the driver is
operating as a guest driver, the chance of retry goes up significantly due
to sharing a wq with multiple VMs. A default value is provided with the
system admin being able to tune the value on a per WQ basis.
Suggested-by: Sanjay Kumar <sanjay.k.kumar@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/163820629464.2702134.7577370098568297574.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
For some devices with only half-duplex capabilities, it doesn't make
much sense to use one DMA channel per direction, as both channels will
never be active at the same time.
Add support for bidirectional I/O on DMA channels. The client drivers
can then request a "tx-rx" DMA channel which will be used for both
directions.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20211206174259.68133-7-paul@crapouillou.net
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The JZ4760 and JZ4760B SoCs have two regular DMA controllers with 6
channels each. They also have an extra DMA controller named MDMA
with only 2 channels, that only supports memcpy operations, and one
named BDMA with only 3 channels, that is mostly used for transfers
between memories and the BCH controller.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20211206174259.68133-5-paul@crapouillou.net
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The JZ4760 SoC has a hardware problem with chan0 not enabling properly
if it's enabled before chan1, after a reset (works fine afterwards).
This is worked around in the probe function by just enabling then
disabling chan1.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20211206174259.68133-4-paul@crapouillou.net
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add SYSFW defined rchan_oes_offset number for J721S2 SoC in soc data.
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://lore.kernel.org/r/20211119132315.15901-2-a-govindraju@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Make use of the struct_size() helper instead of an open-coded version, in
order to avoid any potential type mistakes or integer overflows that, in
the worst scenario, could lead to heap overflows.
Link: https://github.com/KSPP/linux/issues/160
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20211208001013.GA62330@embeddedor
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Handle errors when trying to map the IRQ for the DMA channels.
The main motivation here is to be able to handle probe deferral. E.g. when
using DT overlays it is possible that the DMA controller is probed before
interrupt controller, depending on the order in the DT.
In order to support this switch from irq_of_parse_and_map() to
of_irq_get(), which internally does the same, but it will return
EPROBE_DEFER when the interrupt controller is not yet available.
As a result other errors, such as an invalid IRQ specification, or missing
IRQ are also properly handled.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Link: https://lore.kernel.org/r/20211208114212.234130-1-lars@metafoo.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The display driver wants to pass a custom flag to the DMA engine driver,
which it started doing by using the slave_id field that was traditionally
used for a different purpose.
As there is no longer a correct use for the slave_id field, it should
really be removed, and the remaining users changed over to something
different.
The new mechanism for passing nonstandard settings is using the
.peripheral_config field, so use that to pass a newly defined structure
here, making it clear that this will not work in portable drivers.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20211122222203.4103644-10-arnd@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The slave_id was previously used to pick one DMA slave instead of another,
but this is now done through the DMA descriptors in device tree.
For the qcom_adm driver, the configuration is documented in the DT
binding to contain a tuple of device identifier and a "crci" field,
but the implementation ends up using only a single cell for identifying
the slave, with the crci getting passed in nonstandard properties of
the device, and passed through the dma driver using the old slave_id
field. Part of the problem apparently is that the nand driver ends up
using only a single DMA request ID, but requires distinct values for
"crci" depending on the type of transfer.
Change both the dmaengine driver and the two slave drivers to allow
the documented binding to work in addition to the ad-hoc passing
of crci values. In order to no longer abuse the slave_id field, pass
the data using the "peripheral_config" mechanism instead.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20211122222203.4103644-9-arnd@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
It appears that the code that reads the slave_id from the channel config
was copied incorrectly from other drivers. Nothing ever sets this field
on platforms that use this driver, so remove the reference.
Reviewed-by: Baolin Wang <baolin.wang7@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20211122222203.4103644-8-arnd@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
