Commit graph

28 commits

Author SHA1 Message Date
Zhihao Cheng
6abf572621 ubifs: ubifs_tnc_start_commit: Fix OOB in layout_in_gaps
Running stress-test test_2 in mtd-utils on ubi device, sometimes we can
get following oops message:

  BUG: unable to handle page fault for address: ffffffff00000140
  #PF: supervisor read access in kernel mode
  #PF: error_code(0x0000) - not-present page
  PGD 280a067 P4D 280a067 PUD 0
  Oops: 0000 [#1] SMP
  CPU: 0 PID: 60 Comm: kworker/u16:1 Kdump: loaded Not tainted 5.2.0 #13
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0
  -0-ga698c8995f-prebuilt.qemu.org 04/01/2014
  Workqueue: writeback wb_workfn (flush-ubifs_0_0)
  RIP: 0010:rb_next_postorder+0x2e/0xb0
  Code: 80 db 03 01 48 85 ff 0f 84 97 00 00 00 48 8b 17 48 83 05 bc 80 db
  03 01 48 83 e2 fc 0f 84 82 00 00 00 48 83 05 b2 80 db 03 01 <48> 3b 7a
  10 48 89 d0 74 02 f3 c3 48 8b 52 08 48 83 05 a3 80 db 03
  RSP: 0018:ffffc90000887758 EFLAGS: 00010202
  RAX: ffff888129ae4700 RBX: ffff888138b08400 RCX: 0000000080800001
  RDX: ffffffff00000130 RSI: 0000000080800024 RDI: ffff888138b08400
  RBP: ffff888138b08400 R08: ffffea0004a6b920 R09: 0000000000000000
  R10: ffffc90000887740 R11: 0000000000000001 R12: ffff888128d48000
  R13: 0000000000000800 R14: 000000000000011e R15: 00000000000007c8
  FS:  0000000000000000(0000) GS:ffff88813ba00000(0000)
  knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: ffffffff00000140 CR3: 000000013789d000 CR4: 00000000000006f0
  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
  Call Trace:
    destroy_old_idx+0x5d/0xa0 [ubifs]
    ubifs_tnc_start_commit+0x4fe/0x1380 [ubifs]
    do_commit+0x3eb/0x830 [ubifs]
    ubifs_run_commit+0xdc/0x1c0 [ubifs]

Above Oops are due to the slab-out-of-bounds happened in do-while of
function layout_in_gaps indirectly called by ubifs_tnc_start_commit. In
function layout_in_gaps, there is a do-while loop placing index nodes
into the gaps created by obsolete index nodes in non-empty index LEBs
until rest index nodes can totally be placed into pre-allocated empty
LEBs. @c->gap_lebs points to a memory area(integer array) which records
LEB numbers used by 'in-the-gaps' method. Whenever a fitable index LEB
is found, corresponding lnum will be incrementally written into the
memory area pointed by @c->gap_lebs. The size
((@c->lst.idx_lebs + 1) * sizeof(int)) of memory area is allocated before
do-while loop and can not be changed in the loop. But @c->lst.idx_lebs
could be increased by function ubifs_change_lp (called by
layout_leb_in_gaps->ubifs_find_dirty_idx_leb->get_idx_gc_leb) during the
loop. So, sometimes oob happens when number of cycles in do-while loop
exceeds the original value of @c->lst.idx_lebs. See detail in
https://bugzilla.kernel.org/show_bug.cgi?id=204229.
This patch fixes oob in layout_in_gaps.

Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2019-11-17 22:22:54 +01:00
Thomas Gleixner
2b27bdcc20 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 336
Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation this program is
  distributed in the hope that it will be useful but without any
  warranty without even the implied warranty of merchantability or
  fitness for a particular purpose see the gnu general public license
  for more details you should have received a copy of the gnu general
  public license along with this program if not write to the free
  software foundation inc 51 franklin st fifth floor boston ma 02110
  1301 usa

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 246 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190530000436.674189849@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-05 17:37:07 +02:00
Sascha Hauer
16a26b20d2 ubifs: authentication: Add hashes to index nodes
With this patch the hashes over the index nodes stored in the tree node
cache are written to flash and are checked when read back from flash.
The hash of the root index node is stored in the master node.

During journal replay the hashes are regenerated from the read nodes
and stored in the tree node cache. This means the nodes must previously
be authenticated by other means. This is done in a later patch.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Richard Weinberger <richard@nod.at>
2018-10-23 13:48:39 +02:00
Richard Weinberger
6eb61d587f ubifs: Pass struct ubifs_info to ubifs_assert()
This allows us to have more context in ubifs_assert()
and take different actions depending on the configuration.

Signed-off-by: Richard Weinberger <richard@nod.at>
2018-08-15 00:25:21 +02:00
Kees Cook
6da2ec5605 treewide: kmalloc() -> kmalloc_array()
The kmalloc() function has a 2-factor argument form, kmalloc_array(). This
patch replaces cases of:

        kmalloc(a * b, gfp)

with:
        kmalloc_array(a * b, gfp)

as well as handling cases of:

        kmalloc(a * b * c, gfp)

with:

        kmalloc(array3_size(a, b, c), gfp)

as it's slightly less ugly than:

        kmalloc_array(array_size(a, b), c, gfp)

This does, however, attempt to ignore constant size factors like:

        kmalloc(4 * 1024, gfp)

though any constants defined via macros get caught up in the conversion.

Any factors with a sizeof() of "unsigned char", "char", and "u8" were
dropped, since they're redundant.

The tools/ directory was manually excluded, since it has its own
implementation of kmalloc().

The Coccinelle script used for this was:

// Fix redundant parens around sizeof().
@@
type TYPE;
expression THING, E;
@@

(
  kmalloc(
-	(sizeof(TYPE)) * E
+	sizeof(TYPE) * E
  , ...)
|
  kmalloc(
-	(sizeof(THING)) * E
+	sizeof(THING) * E
  , ...)
)

// Drop single-byte sizes and redundant parens.
@@
expression COUNT;
typedef u8;
typedef __u8;
@@

(
  kmalloc(
-	sizeof(u8) * (COUNT)
+	COUNT
  , ...)
|
  kmalloc(
-	sizeof(__u8) * (COUNT)
+	COUNT
  , ...)
|
  kmalloc(
-	sizeof(char) * (COUNT)
+	COUNT
  , ...)
|
  kmalloc(
-	sizeof(unsigned char) * (COUNT)
+	COUNT
  , ...)
|
  kmalloc(
-	sizeof(u8) * COUNT
+	COUNT
  , ...)
|
  kmalloc(
-	sizeof(__u8) * COUNT
+	COUNT
  , ...)
|
  kmalloc(
-	sizeof(char) * COUNT
+	COUNT
  , ...)
|
  kmalloc(
-	sizeof(unsigned char) * COUNT
+	COUNT
  , ...)
)

// 2-factor product with sizeof(type/expression) and identifier or constant.
@@
type TYPE;
expression THING;
identifier COUNT_ID;
constant COUNT_CONST;
@@

(
- kmalloc
+ kmalloc_array
  (
-	sizeof(TYPE) * (COUNT_ID)
+	COUNT_ID, sizeof(TYPE)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(TYPE) * COUNT_ID
+	COUNT_ID, sizeof(TYPE)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(TYPE) * (COUNT_CONST)
+	COUNT_CONST, sizeof(TYPE)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(TYPE) * COUNT_CONST
+	COUNT_CONST, sizeof(TYPE)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(THING) * (COUNT_ID)
+	COUNT_ID, sizeof(THING)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(THING) * COUNT_ID
+	COUNT_ID, sizeof(THING)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(THING) * (COUNT_CONST)
+	COUNT_CONST, sizeof(THING)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(THING) * COUNT_CONST
+	COUNT_CONST, sizeof(THING)
  , ...)
)

// 2-factor product, only identifiers.
@@
identifier SIZE, COUNT;
@@

- kmalloc
+ kmalloc_array
  (
-	SIZE * COUNT
+	COUNT, SIZE
  , ...)

// 3-factor product with 1 sizeof(type) or sizeof(expression), with
// redundant parens removed.
@@
expression THING;
identifier STRIDE, COUNT;
type TYPE;
@@

(
  kmalloc(
-	sizeof(TYPE) * (COUNT) * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  kmalloc(
-	sizeof(TYPE) * (COUNT) * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  kmalloc(
-	sizeof(TYPE) * COUNT * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  kmalloc(
-	sizeof(TYPE) * COUNT * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  kmalloc(
-	sizeof(THING) * (COUNT) * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
|
  kmalloc(
-	sizeof(THING) * (COUNT) * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
|
  kmalloc(
-	sizeof(THING) * COUNT * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
|
  kmalloc(
-	sizeof(THING) * COUNT * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
)

// 3-factor product with 2 sizeof(variable), with redundant parens removed.
@@
expression THING1, THING2;
identifier COUNT;
type TYPE1, TYPE2;
@@

(
  kmalloc(
-	sizeof(TYPE1) * sizeof(TYPE2) * COUNT
+	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
  , ...)
|
  kmalloc(
-	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
  , ...)
|
  kmalloc(
-	sizeof(THING1) * sizeof(THING2) * COUNT
+	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
  , ...)
|
  kmalloc(
-	sizeof(THING1) * sizeof(THING2) * (COUNT)
+	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
  , ...)
|
  kmalloc(
-	sizeof(TYPE1) * sizeof(THING2) * COUNT
+	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
  , ...)
|
  kmalloc(
-	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
  , ...)
)

// 3-factor product, only identifiers, with redundant parens removed.
@@
identifier STRIDE, SIZE, COUNT;
@@

(
  kmalloc(
-	(COUNT) * STRIDE * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kmalloc(
-	COUNT * (STRIDE) * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kmalloc(
-	COUNT * STRIDE * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kmalloc(
-	(COUNT) * (STRIDE) * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kmalloc(
-	COUNT * (STRIDE) * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kmalloc(
-	(COUNT) * STRIDE * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kmalloc(
-	(COUNT) * (STRIDE) * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kmalloc(
-	COUNT * STRIDE * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
)

// Any remaining multi-factor products, first at least 3-factor products,
// when they're not all constants...
@@
expression E1, E2, E3;
constant C1, C2, C3;
@@

(
  kmalloc(C1 * C2 * C3, ...)
|
  kmalloc(
-	(E1) * E2 * E3
+	array3_size(E1, E2, E3)
  , ...)
|
  kmalloc(
-	(E1) * (E2) * E3
+	array3_size(E1, E2, E3)
  , ...)
|
  kmalloc(
-	(E1) * (E2) * (E3)
+	array3_size(E1, E2, E3)
  , ...)
|
  kmalloc(
-	E1 * E2 * E3
+	array3_size(E1, E2, E3)
  , ...)
)

// And then all remaining 2 factors products when they're not all constants,
// keeping sizeof() as the second factor argument.
@@
expression THING, E1, E2;
type TYPE;
constant C1, C2, C3;
@@

(
  kmalloc(sizeof(THING) * C2, ...)
|
  kmalloc(sizeof(TYPE) * C2, ...)
|
  kmalloc(C1 * C2 * C3, ...)
|
  kmalloc(C1 * C2, ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(TYPE) * (E2)
+	E2, sizeof(TYPE)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(TYPE) * E2
+	E2, sizeof(TYPE)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(THING) * (E2)
+	E2, sizeof(THING)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(THING) * E2
+	E2, sizeof(THING)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	(E1) * E2
+	E1, E2
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	(E1) * (E2)
+	E1, E2
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	E1 * E2
+	E1, E2
  , ...)
)

Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12 16:19:22 -07:00
Richard Weinberger
df71b09145 ubifs: Fail commit if TNC is obviously inconsistent
A reference to LEB 0 or with length 0 in the TNC
is never correct and could be caused by a memory corruption.
Don't write such a bad index node to the MTD.
Instead fail the commit which will turn UBIFS into read-only mode.

This is less painful than having the bad reference on the MTD
from where UBFIS has no chance to recover.

Signed-off-by: Richard Weinberger <richard@nod.at>
2017-07-14 22:49:07 +02:00
Vincent Stehlé
c0082e985f ubifs: Fix assertion in layout_in_gaps()
An assertion in layout_in_gaps() verifies that the gap_lebs pointer is
below the maximum bound. When computing this maximum bound the idx_lebs
count is multiplied by sizeof(int), while C pointers arithmetic does take
into account the size of the pointed elements implicitly already. Remove
the multiplication to fix the assertion.

Fixes: 1e51764a3c ("UBIFS: add new flash file system")
Cc: <stable@vger.kernel.org>
Signed-off-by: Vincent Stehlé <vincent.stehle@intel.com>
Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2016-08-23 23:02:40 +02:00
Sheng Yong
235c362bd0 UBIFS: extend debug/message capabilities
In the case where we have more than one volumes on different UBI
devices, it may be not that easy to tell which volume prints the
messages.  Add ubi number and volume id in ubifs_msg/warn/error
to help debug. These two values are passed by struct ubifs_info.

For those where ubifs_info is not initialized yet, ubifs_* is
replaced by pr_*. For those where ubifs_info is not avaliable,
ubifs_info is passed to the calling function as a const parameter.

The output looks like,

[   95.444879] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 696
[   95.484688] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "test1"
[   95.484694] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[   95.484699] UBIFS (ubi0:1): FS size: 30220288 bytes (28 MiB, 238 LEBs), journal size 1523712 bytes (1 MiB, 12 LEBs)
[   95.484703] UBIFS (ubi0:1): reserved for root: 1427378 bytes (1393 KiB)
[   95.484709] UBIFS (ubi0:1): media format: w4/r0 (latest is w4/r0), UUID 40DFFC0E-70BE-4193-8905-F7D6DFE60B17, small LPT model
[   95.489875] UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 699
[   95.529713] UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "test2"
[   95.529718] UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[   95.529724] UBIFS (ubi1:0): FS size: 19808256 bytes (18 MiB, 156 LEBs), journal size 1015809 bytes (0 MiB, 8 LEBs)
[   95.529727] UBIFS (ubi1:0): reserved for root: 935592 bytes (913 KiB)
[   95.529733] UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID EEB7779D-F419-4CA9-811B-831CAC7233D4, small LPT model

[  954.264767] UBIFS error (ubi1:0 pid 756): ubifs_read_node: bad node type (255 but expected 6)
[  954.367030] UBIFS error (ubi1:0 pid 756): ubifs_read_node: bad node at LEB 0:0, LEB mapping status 1

Signed-off-by: Sheng Yong <shengyong1@huawei.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2015-03-25 11:08:41 +02:00
hujianyang
b793a8c888 UBIFS: remove useless statements
This patch removes useless and duplicate statements.

Signed-off-by: hujianyang <hujianyang@huawei.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2014-07-19 09:53:51 +03:00
Peter Zijlstra
4e857c58ef arch: Mass conversion of smp_mb__*()
Mostly scripted conversion of the smp_mb__* barriers.

Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/n/tip-55dhyhocezdw1dg7u19hmh1u@git.kernel.org
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-arch@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-18 14:20:48 +02:00
Akinobu Mita
3d251a5b9e UBIFS: rename random32() to prandom_u32()
Use more preferable function name which implies using a pseudo-random
number generator.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2013-01-15 15:45:27 +02:00
Richard Weinberger
b36a261e8c UBI: Kill data type hint
We do not need this feature and to our shame it even was not working
and there was a bug found very recently.
	-- Artem Bityutskiy

Without the data type hint UBI2 (fastmap) will be easier to implement.

Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-05-20 20:25:59 +03:00
Artem Bityutskiy
f70b7e52aa UBIFS: remove Kconfig debugging option
Have the debugging stuff always compiled-in instead. It simplifies maintanance
a lot.

Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-05-16 19:53:46 +03:00
Artem Bityutskiy
edf6be245f UBIFS: rename dumping functions
This commit re-names all functions which dump something from "dbg_dump_*()" to
"ubifs_dump_*()". This is done for consistency with UBI and because this way it
will be more logical once we remove the debugging sompilation option.

Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-05-16 19:15:56 +03:00
Artem Bityutskiy
8d7819b4af UBIFS: lessen amount of debugging check types
We have too many different debugging checks - lessen the amount by merging all
index-related checks into one. At the same time, move the "force in-the-gap"
test to the "index checks" class, because it is too heavy for the "general"
class.

This patch merges TNC, Old index, and Index size check and calles this just
"index checks".

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-07-04 10:54:28 +03:00
Artem Bityutskiy
2b1844a8c9 UBIFS: introduce helper functions for debugging checks and tests
This patch introduces helper functions for all debugging checks, so instead of
doing

if (!(ubifs_chk_flags & UBIFS_CHK_GEN))

we now do

if (!dbg_is_chk_gen(c))

This is a preparation to further changes where the flags will go away, and
we'll need to only change the helper functions, but the code which utilizes
them won't be touched.

At the same time this patch removes 'dbg_force_in_the_gaps()',
'dbg_force_in_the_gaps_enabled()', and dbg_failure_mode helpers for
consistency.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-07-04 10:54:28 +03:00
Artem Bityutskiy
06b282a4cc UBIFS: add few commentaries about TNC
Add a couple of comments - while looking into TNC I could not easily figure out
few facts, so it is a good idea to document them in the code.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-07-04 10:54:27 +03:00
Artem Bityutskiy
f42eed7cba UBIFS: harmonize znode flag helpers
We have 3 znode flags: cow, obsolete, dirty. For the last flag we have a
'ubifs_zn_dirty()' helper function, but for the other 2 flags we use
'test_bit()' directly.

This patch makes the situation more consistent and introduces helpers for the
other 2 flags: 'ubifs_zn_cow()' and 'ubifs_zn_obsolete()'.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-07-04 10:54:27 +03:00
Artem Bityutskiy
1f42596ec0 UBIFS: remove dead code
Remove dead pieces of code under "if (c->min_io_size == 1)" statement -
we never execute it because in UBIFS 'c->min_io_size' is always at least 8.
This are leftovers from old pre-mainline prototype.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-07-04 10:54:27 +03:00
Artem Bityutskiy
bc3f07f090 UBIFS: make force in-the-gaps to be a general self-check
UBIFS can force itself to use the 'in-the-gaps' commit method - the last resort
method which is normally invoced very very rarely. Currently this "force
int-the-gaps" debugging feature is a separate test mode. But it is a bit saner
to make it to be the "general" self-test check instead.

This patch is just a clean-up which should make the debugging code look a bit
nicer and easier to use - we have way too many debugging options.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-05-13 19:23:54 +03:00
Artem Bityutskiy
f1bd66afb1 UBIFS: improve space checking debugging feature
This patch improves the 'dbg_check_space_info()' function which checks
whether the amount of space before re-mounting and after re-mounting
is the same (remounting from R/O to R/W modes and vice-versa).

The problem is that 'dbg_check_space_info()' does not save the budgeting
information before re-mounting, so when an error is reported, we do not
know why the amount of free space changed.

This patches makes the following changes:

1. Teaches 'dbg_dump_budg()' function to accept a 'struct ubifs_budg_info'
   argument and print out the this argument. This way we may ask it to
   print any saved budgeting info, no only the current one.
2. Accordingly changes all the callers of 'dbg_dump_budg()' to comply with
   the changed interface.
3. Introduce a 'saved_bi' (saved budgeting info) field to
   'struct ubifs_debug_info' and save the budgeting info before re-mounting
   there.
4. Change 'dbg_check_space_info()' and make it print both old and new
   budgeting information.
5. Additionally, save 'c->igx_gc_cnt' and print it if and error happens. This
   value contributes to the amount of free space, so we have to print it.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-05-13 19:23:54 +03:00
Artem Bityutskiy
8ff83089f8 UBIFS: simplify dbg_dump_budg calling conventions
The current 'dbg_dump_budg()' calling convention is that the
'c->space_lock' spinlock is held. However, none of the callers
actually use it from contects which have 'c->space_lock' locked,
so all callers have to explicitely lock and unlock the spinlock.
This is not very sensible convention. This patch changes it and
makes 'dbg_dump_budg()' lock the spinlock instead of imposing this
to the callers. This simplifies the code a little.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-05-13 19:23:53 +03:00
Artem Bityutskiy
b137545c44 UBIFS: introduce a separate structure for budgeting info
This patch separates out all the budgeting-related information
from 'struct ubifs_info' to 'struct ubifs_budg_info'. This way the
code looks a bit cleaner. However, the main driver for this is
that we want to save budgeting information and print it later,
so a separate data structure for this is helpful.

This patch is a preparation for the further debugging output
improvements.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-05-13 19:23:53 +03:00
Artem Bityutskiy
348709bad3 UBIFS: do not print scary error messages needlessly
At the moment UBIFS print large and scary error messages and
flash dumps in case of nearly any corruption, even if it is
a recoverable corruption. For example, if the master node is
corrupted, ubifs_scan() prints error dumps, then UBIFS recovers
just fine and goes on.

This patch makes UBIFS print scary error messages only in
real cases, which are not recoverable. It adds 'quiet' argument
to the 'ubifs_scan()' function, so the caller may ask 'ubi_scan()'
not to print error messages if the caller is able to do recovery.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Reviewed-by: Adrian Hunter <Adrian.Hunter@nokia.com>
2009-09-10 12:06:47 +03:00
Artem Bityutskiy
650ed50f42 UBIFS: re-calculate min_idx_size after the commit
When we commit, but before we try to write anything to the flash
media, @c->min_idx_size is inaccurate, because we do not re-calculate
it after the commit. Do not forget to do this.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2008-12-23 12:24:05 +02:00
Artem Bityutskiy
17c2f9f85c UBIFS: separate debugging fields out
Introduce a new data structure which contains all debugging
stuff inside. This is cleaner than having debugging stuff
directly in 'c'.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2008-12-03 13:14:33 +02:00
Artem Bityutskiy
0010f18afc UBIFS: minor tweaks in commit
No functional changes, just lessen the amount of indentations.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2008-08-13 11:38:19 +03:00
Artem Bityutskiy
1e51764a3c UBIFS: add new flash file system
This is a new flash file system. See
http://www.linux-mtd.infradead.org/doc/ubifs.html

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
2008-07-15 17:35:15 +03:00