Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version this program is distributed in the
hope that it will be useful but without any warranty without even
the implied warranty of merchantability or fitness for a particular
purpose see the gnu general public license for more details you
should have received a copy of the gnu general public license along
with this program if not write to the free software foundation inc
59 temple place suite 330 boston ma 02111 1307 usa
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 1334 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070033.113240726@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When computing a linear address and segmentation is used, we need to know
the base address of the segment involved in the computation. In most of
the cases, the segment base address will be zero as in USER_DS/USER32_DS.
However, it may be possible that a user space program defines its own
segments via a local descriptor table. In such a case, the segment base
address may not be zero. Thus, the segment base address is needed to
calculate correctly the linear address.
If running in protected mode, the segment selector to be used when
computing a linear address is determined by either any of segment override
prefixes in the instruction or inferred from the registers involved in the
computation of the effective address; in that order. Also, there are cases
when the segment override prefixes shall be ignored (i.e., code segments
are always selected by the CS segment register; string instructions always
use the ES segment register when using rDI register as operand). In long
mode, segment registers are ignored, except for FS and GS. In these two
cases, base addresses are obtained from the respective MSRs.
For clarity, this process can be split into four steps (and an equal
number of functions): determine if segment prefixes overrides can be used;
parse the segment override prefixes, and use them if found; if not found
or cannot be used, use the default segment registers associated with the
operand registers. Once the segment register to use has been identified,
read its value to obtain the segment selector.
The method to obtain the segment selector depends on several factors. In
32-bit builds, segment selectors are saved into a pt_regs structure
when switching to kernel mode. The same is also true for virtual-8086
mode. In 64-bit builds, segmentation is mostly ignored, except when
running a program in 32-bit legacy mode. In this case, CS and SS can be
obtained from pt_regs. DS, ES, FS and GS can be read directly from
the respective segment registers.
In order to identify the segment registers, a new set of #defines is
introduced. It also includes two special identifiers. One of them
indicates when the default segment register associated with instruction
operands shall be used. Another one indicates that the contents of the
segment register shall be ignored; this identifier is used when in long
mode.
Improvements-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Borislav Petkov <bp@suse.de>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: ricardo.neri@intel.com
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Huang Rui <ray.huang@amd.com>
Cc: Qiaowei Ren <qiaowei.ren@intel.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: "Ravi V. Shankar" <ravi.v.shankar@intel.com>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: Chen Yucong <slaoub@gmail.com>
Cc: Adam Buchbinder <adam.buchbinder@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Thomas Garnier <thgarnie@google.com>
Link: https://lkml.kernel.org/r/1509135945-13762-14-git-send-email-ricardo.neri-calderon@linux.intel.com
Add support for Intel's AVX-512 instructions to the instruction decoder.
AVX-512 instructions are documented in Intel Architecture Instruction
Set Extensions Programming Reference (February 2016).
AVX-512 instructions are identified by a EVEX prefix which, for the
purpose of instruction decoding, can be treated as though it were a
4-byte VEX prefix.
Existing instructions which can now accept an EVEX prefix need not be
further annotated in the op code map (x86-opcode-map.txt). In the case
of new instructions, the op code map is updated accordingly.
Also add associated Mask Instructions that are used to manipulate mask
registers used in AVX-512 instructions.
The 'perf tools' instruction decoder is updated in a subsequent patch.
And a representative set of instructions is added to the perf tools new
instructions test in a subsequent patch.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: X86 ML <x86@kernel.org>
Link: http://lkml.kernel.org/r/1469003437-32706-3-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix to decode grouped AVX with VEX pp bits which should be
handled as same as last-prefixes. This fixes below warnings
in posttest with CONFIG_CRYPTO_SHA1_SSSE3=y.
Warning: arch/x86/tools/test_get_len found difference at <sha1_transform_avx>:ffffffff810d5fc0
Warning: ffffffff810d6069: c5 f9 73 de 04 vpsrldq $0x4,%xmm6,%xmm0
Warning: objdump says 5 bytes, but insn_get_length() says 4
...
With this change, test_get_len can decode it correctly.
$ arch/x86/tools/test_get_len -v -y
ffffffff810d6069: c5 f9 73 de 04 vpsrldq $0x4,%xmm6,%xmm0
Succeed: decoded and checked 1 instructions
Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: yrl.pp-manager.tt@hitachi.com
Link: http://lkml.kernel.org/r/20120210053340.30429.73410.stgit@localhost.localdomain
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Add Intel AVX(Advanced Vector Extensions) instruction set
support to x86 instruction decoder. This adds insn.vex_prefix
field for storing VEX prefixes, and introduces some original
tags for expressing opcodes attributes.
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: K.Prasad <prasad@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
LKML-Reference: <20091027204226.30545.23451.stgit@harusame>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Add x86 instruction decoder to arch-specific libraries. This decoder
can decode x86 instructions used in kernel into prefix, opcode, modrm,
sib, displacement and immediates. This can also show the length of
instructions.
This version introduces instruction attributes for decoding
instructions.
The instruction attribute tables are generated from the opcode map file
(x86-opcode-map.txt) by the generator script(gen-insn-attr-x86.awk).
Currently, the opcode maps are based on opcode maps in Intel(R) 64 and
IA-32 Architectures Software Developers Manual Vol.2: Appendix.A,
and consist of below two types of opcode tables.
1-byte/2-bytes/3-bytes opcodes, which has 256 elements, are
written as below;
Table: table-name
Referrer: escaped-name
opcode: mnemonic|GrpXXX [operand1[,operand2...]] [(extra1)[,(extra2)...] [| 2nd-mnemonic ...]
(or)
opcode: escape # escaped-name
EndTable
Group opcodes, which has 8 elements, are written as below;
GrpTable: GrpXXX
reg: mnemonic [operand1[,operand2...]] [(extra1)[,(extra2)...] [| 2nd-mnemonic ...]
EndTable
These opcode maps include a few SSE and FP opcodes (for setup), because
those opcodes are used in the kernel.
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Signed-off-by: Jim Keniston <jkenisto@us.ibm.com>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Avi Kivity <avi@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jason Baron <jbaron@redhat.com>
Cc: K.Prasad <prasad@linux.vnet.ibm.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Przemysław Pawełczyk <przemyslaw@pawelczyk.it>
Cc: Roland McGrath <roland@redhat.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Vegard Nossum <vegard.nossum@gmail.com>
LKML-Reference: <20090813203413.31965.49709.stgit@localhost.localdomain>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
