Dummy dai_link->platform is not needed.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Tested-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://lore.kernel.org/r/877cu6f619.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If CPU is using soc-generic-dmaengine-pcm, Platform Component will be
same as CPU Component. In this case, we can use CPU dlc for Platform dlc.
This patch shares CPU dlc with Platform, and add comment.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Tested-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://lore.kernel.org/r/878remf61j.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If CPU is using soc-generic-dmaengine-pcm, Platform Component will be
same as CPU Component. In this case, we can use CPU dlc for Platform dlc.
This patch shares CPU dlc with Platform, and add comment.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Tested-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://lore.kernel.org/r/87a5z2f61w.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If CPU is using soc-generic-dmaengine-pcm, Platform Component will be
same as CPU Component. In this case, we can use CPU dlc for Platform dlc.
This patch shares CPU dlc with Platform, and add comment.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Tested-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://lore.kernel.org/r/87bkjif628.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The auto-silencer supports two modes: "thresholded" to fill up "just
enough", and "top-up" to fill up "as much as possible". The two modes
used rather distinct code paths, which this patch unifies. The only
remaining distinction is how much we actually want to fill.
This fixes a bug in thresholded mode, where we failed to use new_hw_ptr,
resulting in under-fill.
Top-up mode is now more well-behaved and much easier to understand in
corner cases.
This also updates comments in the proximity of silencing-related data
structures.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230420113324.877164-1-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
Last minute patch for correct the pasue/resume operation with IPC4. The
issues are hardto reproduce and needs extended stress testing to be hit,
in which case the audio breaks due to DMA errors.
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
Simplify IPC messages to avoid passing a reply structure that is not
used later.
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
Preparation of ALC712 support with different types of SoundWire
devices per link, new RaptorLake SoundWire device, better error
handling for Cirrus devices and cosmetic changes for Max98373.
Bard Liao (3):
ASoC: Intel: sof_sdw: set codec_num = 1 if the device is not
aggregated
ASoC: Intel: sof_sdw: support different devices on the same sdw link
ASoC: Intel: sof_sdw: append codec type to dai link name
Curtis Malainey (1):
ASoC: Intel: sof_cirrus_common: Guard against missing buses
Yong Zhi (2):
ASoC: Intel: sof_sdw: remove late_probe flag in struct
sof_sdw_codec_info
ASoC: Intel: sof_sdw_max98373: change sof_sdw_mx8373_late_probe to
static call
apoorv (1):
ASoC: Intel: soc-acpi: Add entry for rt711-sdca-sdw at link 2 in RPL
match table
sound/soc/intel/boards/sof_cirrus_common.c | 7 +-
sound/soc/intel/boards/sof_sdw.c | 181 ++++++++++++------
sound/soc/intel/boards/sof_sdw_common.h | 3 -
sound/soc/intel/boards/sof_sdw_max98373.c | 22 +--
.../intel/common/soc-acpi-intel-rpl-match.c | 17 +-
5 files changed, 152 insertions(+), 78 deletions(-)
--
2.37.2
cs35l56_mbox_send() logs a warning when sending a mbox command fails so
the callers can be simplified.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230420102043.1151830-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The es8316 driver uses a register range to specify the single volatile
register it has. While the cost will be in the noise this is a bunch of
overhead compared to just having a volatile_reg() callback so switch to
the callback.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230419-asoc-es8316-volatile-v1-1-2074ec93d8f1@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Suspending to S0iX with IPC3 requires the PM_GATE IPC to be sent again
to stop the DMA trace. But with IPC4, this is not needed as the trace is
stopped with the LARGE_CONFIG_SET IPC. Also, sending the MOD_D0IX IPC to
set the D0I3 state again when the DSP is in D0I3 already results in an
imbalance in PM runtime states in the firmware. So split the
set_power_state ops for IPC3 and IPC4 to avoid sending the MOD_D0IX IPC
when the DSP is already in D0I3 with IPC4.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230420104714.29573-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In the case of IPC4, a pipeline is only paused during STOP/PAUSE/SUSPEND
triggers and the FW keeps the host DMA running when a pipeline is
paused. The start/stop tests iterate through STOP/START triggers without
involving a hw_free. This means that the pipeline state will only toggle
between PAUSED (during the STOP trigger) and RUNNING (during the START
trigger). So this test should be treated in the same way as a
PAUSE_PUSH/PAUSE_RELEASE test and the DMA should be kept running when
toggling the pipeline states between PAUSED and RUNNING.
Since there is no way to tell if a STOP trigger will be followed by hw_free
or not, this patch proposes to always skip DMA stop during the STOP trigger
and handle it later during hw_free. Introduce a new flag in struct
sof_ipc_pcm_ops, delayed_platform_trigger, that will be used to ensure that
the host DMA will not be stopped during the STOP/PAUSE/RELEASE triggers
and set it for IPC4. The platform_trigger call to stop the DMA will be
invoked during PCM hw_free instead when the pipeline is reset.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230420114137.27613-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The FW does not pause/stop the host DMA during pause and stopping the
host DMA from the driver could result in an unknown behaviour. So, skip
triggering the HD-Audio host DMA during pause/release.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230420114137.27613-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The existing sdw_sof machine driver constructs two SoundWire interfaces
by direction and sdw link id. It means that we will have exactly the
same dai link name if two dai links are on the same sdw link with the
same direction.
The new Realtek codec has two SoundWire interfaces for jack and DMIC
functions and they are treated as different codecs. To create two dai
links for jack and DMIC, we need to have different dai link names.
This patch suggests to append codec type if there are two or more
different types of devices on the same sdw bus.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20230419195524.46995-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The existing code assumes all devices on the same soundwire link
are the same devices. eg. all rt1316. This commit removes the
assumption and supports different devices on the same soundwire link.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20230419195524.46995-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We assume adr_link->num_adr = 1 if a device is not aggregated. However,
the assumption is not valid if there are different type devices on the
same soundwire link.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20230419195524.46995-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
sof_sdw_mx8373_late_probe is only used in sof_sdw_max98373,
so it should be static and rename it to 'mx8373_sdw_late_probe'.
Signed-off-by: Yong Zhi <yong.zhi@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230419195524.46995-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Just use codec_card_late_probe ptr in struct sof_sdw_codec_info
for validation check and drop late_probe variable.
Signed-off-by: Yong Zhi <yong.zhi@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230419195524.46995-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
RT711 sdca sdw is added with SDW2 link for RPL-P CRB platform.
Signed-off-by: apoorv <apoorv@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230419195524.46995-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Even if we find a acpi device we can still be missing the physical node.
Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230419195524.46995-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Convert all existing calls that pass "NULL, 0" for reply data to the new
no_reply calls. Also convert any calls that pass in data but don't
actually parse the result.
Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20230419194057.42205-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
95% of the calls inside SOF to TX an IPC don't care about a reply. Yet
the previous commit cleaned up a bunch of replies that were being
populated and then thrown away. This adds some functions so users who do
not need replies don't feel obligated to provide the space to the API.
Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20230419194057.42205-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There is a HP ProBook 455 G10 which using ALC236 codec and need the
ALC236_FIXUP_HP_MUTE_LED_MICMUTE_VREF quirk to make mute LED and
micmute LED work.
Signed-off-by: Andy Chi <andy.chi@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230420035942.66817-1-andy.chi@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A few remaining small fixes for v6.3, all small driver specific ones.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmRATGwACgkQJNaLcl1U
h9B1eQf+Miu2/EzjXoZ5nW3yxU3zJmu7BINhvb3pLlUxkNNxz/FG6chZgO+K17F4
VlaOc8UkhjXPe2BRZljF34qHPLMdyUlX4bi4NmCMikzC8h7xDvpIONYt66v4y2Du
bMEYbmbrVjkK83ZKjnHaSX9iC/qXkV/WQKyMTe7gR/pz2M5epwK6Q8iCtxITfYZt
tlKnp4MjdFiEbzvVcylaJi0sDHozRYtT5kFpKrJQNVLjgnISUbkR03wME3wYG69m
wlQbdDlkU+JOyiwLCkt+U5z4nLmPIgFHnb8frZTBUpSu4iqFesY69Jbh7XUWQyHi
dwiDoyR80CKV5ILmoeIzzzBgDXQV2g==
=EK/5
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v6.3-rc7' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.3
A few remaining small fixes for v6.3, all small driver specific ones.
This reverts commit 33683cbf49 ("ASoC: fsl: remove unnecessary
dai_link->platform").
dai_link->platform is needed. The platform component is
"snd_dmaengine_pcm", which is registered from cpu driver,
If dai_link->platform is not assigned, then platform
component will not be probed, then there will be issue:
aplay: main:831: audio open error: Invalid argument
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1681900158-17428-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
dev_err_probe() already display the error code. There is no need to
duplicate it explicitly in the error message.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://lore.kernel.org/r/c167c16a535049d56f817bbede9c9f6f0a0f4c68.1681626553.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
dma_request_slave_channel() may return NULL which will lead to
NULL pointer dereference error in 'tmp_chan->private'.
Correct this behaviour by, first, switching from deprecated function
dma_request_slave_channel() to dma_request_chan(). Secondly, enable
sanity check for the resuling value of dma_request_chan().
Also, fix description that follows the enacted changes and that
concerns the use of dma_request_slave_channel().
Fixes: 706e2c8811 ("ASoC: fsl_asrc_dma: Reuse the dma channel if available in Back-End")
Co-developed-by: Natalia Petrova <n.petrova@fintech.ru>
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://lore.kernel.org/r/20230417133242.53339-1-n.zhandarovich@fintech.ru
Signed-off-by: Mark Brown <broonie@kernel.org>
SAI on i.MX8QM platform supports the data lines up to 4. So the pins
setting should be corrected to 4.
Fixes: eba0f00775 ("ASoC: fsl_sai: Enable combine mode soft")
Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Link: https://lore.kernel.org/r/20230418094259.4150771-1-chancel.liu@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Unfortunately, the tester gave a weak feedback (working/non-working) for
this case. After the double confirmation, this change is not really required.
The standard code with alc269_fallback_pin_fixup_tbl should work on this
hardware.
Fixes: 5911d78fab ("ALSA: hda/realtek: Improve support for Dell Precision 3260")
Fixes: 5f4efc9dfc ("ALSA: hda/realtek: Fix support for Dell Precision 3260")
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230419081121.304846-1-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
It is preferred to use typed property access functions (i.e.
of_property_read_<type> functions) rather than low-level
of_get_property/of_find_property functions for reading properties.
Convert reading boolean properties to to of_property_read_bool().
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230310144734.1546587-1-robh@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
It is preferred to use typed property access functions (i.e.
of_property_read_<type> functions) rather than low-level
of_get_property/of_find_property functions for reading properties. As
part of this, convert of_get_property/of_find_property calls to the
recently added of_property_present() helper when we just want to test
for presence of a property and nothing more.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230310144733.1546500-1-robh@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Rename the mixer source defines from CS35L56_INPUT_SRC_SWIRE_RXn
to CS35L56_INPUT_SRC_SWIRE_DP1_CHANNELn to match the latest
datasheet.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230418144309.1100721-5-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The mixer source index value for SDW2RX1 is different between
A1 and B0 silicon. As the driver doesn't provide a DAI for SDW2
just remove it as a mixer source option.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230418144309.1100721-4-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Reduce SDW1 to 4 channels and remove the controls for SDW1
TX5 and TX6.
The TX5 and TX6 channels have been removed from B0 silicon.
There is no need to support them on A1 silicon.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230418144309.1100721-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
EINT20 contains wake-source interrupts and also interface-blocked
interrupts, which all default to unmasked after reset or wake.
The comment in cs35l56_init() only mentioned the wake interrupts.
Update the comment so it's clear that it's intentional to also
mask the *_BLOCKED interrupts.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230418144309.1100721-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Replace dev_err() in probe() path with dev_err_probe() to:
1. Make code a bit simpler and easier to read,
2. Do not print messages on deferred probe.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230418074630.8681-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Replace dev_err() in probe() path with dev_err_probe() to:
1. Make code a bit simpler and easier to read,
2. Do not print messages on deferred probe.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230418074630.8681-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
clang build reports
sound/soc/codecs/nau8825.c:2826:31: error: overlapping comparisons
always evaluate to false [-Werror,-Wtautological-overlap-compare]
if (nau8825->adc_delay < 125 && nau8825->adc_delay > 500)
~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~
This is a bug, a logical-or should have been used.
Fixes: fc0b096c92 ("ASoC: nau8825: Add delay control for input path")
Signed-off-by: Tom Rix <trix@redhat.com>
Acked-by: David Lin <CTLIN0@nuvoton.com>
Link: https://lore.kernel.org/r/20230418120955.3230705-1-trix@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Richard Fitzgerald <rf@opensource.cirrus.com>:
Various code improvements. These remove redundant code and
clean up less-than-optimal original implementations.
of_node_put() should have been done directly after
mqs_priv->regmap = syscon_node_to_regmap(gpr_np);
otherwise it creates a reference leak on the success path.
To fix this, of_node_put() is moved to the correct location, and change
all the gotos to direct returns.
Fixes: a9d2736714 ("ASoC: fsl_mqs: Fix error handling in probe")
Signed-off-by: Liliang Ye <yll@hust.edu.cn>
Reviewed-by: Dan Carpenter <error27@gmail.com>
Link: https://lore.kernel.org/r/20230403152647.17638-1-yll@hust.edu.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>:
ASoC is using many type of mutex lock, but
some of them has helper function, but some doesn't.
Or, it has helper function, but is static.
This patch-set adds helper function and use it.
ASoC need to use card->mutex with _INIT or _RUNTIME,
but there is no helper function for it.
This patch adds its helper function and use it.
Because people might misunderstand that _init() is mutex initialization,
this patch renames _INIT to _ROOT and adds new
snd_soc_card_mutex_lock_root() for it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87a5zlx3tw.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
soc-pcm.c has snd_soc_dpcm_mutex_lock/unlock(),
but other files can't use it because it is static function.
It requests snd_soc_pcm_runtime as parameter (A), but sometimes we
want to use it by snd_soc_card (B).
(A) static inline void snd_soc_dpcm_mutex_lock(struct snd_soc_pcm_runtime *rtd)
{
mutex_lock_nested(&rtd->card->pcm_mutex, rtd->card->pcm_subclass);
} ^^^^^^^^^
(B) mutex_lock_nested(&card->pcm_mutex, card->pcm_subclass);
^^^^
We want to use it with both "rtd" and "card" for dapm lock/unlock.
To enable it, this patch uses _Generic macro.
This patch makes snd_soc_dpcm_mutex_{un}lock() global function, and use it on
each files.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87bkk1x3ud.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
soc.h has snd_soc_dapm_mutex_lock/unlock() definition and
many drivers are using it, but soc-dapm.c is not.
1st reason is snd_soc_dapm_mutex_lock/unlock() requests
snd_soc_dapm_context pointer as parameter (A), but sometimes soc-dapm.c
needs to use snd_soc_card (B).
(A) static inline void snd_soc_dapm_mutex_lock(struct snd_soc_dapm_context *dapm)
{
mutex_lock_nested(&dapm->card->dapm_mutex, SND_SOC_DAPM_CLASS_RUNTIME);
} ^^^^^^^^^^
(B) mutex_lock_nested(&card->dapm_mutex, SND_SOC_DAPM_CLASS_RUNTIME);
^^^^
2nd reason is it want to use SND_SOC_DAPM_CLASS_INIT for mutex_lock_nested(),
but helper is using _RUNTIME (A).
The conclusion is we want to use "dapm vs card" and "_RUNTIME vs _INIT"
for dapm lock/unlock. To enable this selfish request, this patch uses
_Generic macro. We can use snd_soc_dapm_mutex_lock/unlock() for both
dapm and card case.
snd_soc_dapm_mutex_lock(dapm); snd_soc_dapm_mutex_unlock(dapm);
snd_soc_dapm_mutex_lock(card); snd_soc_dapm_mutex_unlock(card);
Current soc-dapm.c is using both mutex_lock() and mutex_lock_nested().
This patch handles mutex_lock() as mutex_lock_nested(..., 0),
in other words, handles below as same.
mutex_lock(&card->dapm_mutex);
mutex_lock_nested(&card->dapm_mutex, SND_SOC_DAPM_CLASS_INIT);
Because people might misunderstand that _init() is mutex initialization,
this patch renames _INIT to _ROOT and adds new
snd_soc_dapm_mutex_lock_root() for it.
This patch also moves snd_soc_dapm_subclass definition from soc-dapm.h
to soc.h to keep related code together.
Because very complex soc.h vs soc-dapm.h relationship,
it is difficult/impossible to define these helper into soc-dapm.h.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87cz4hx3v0.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The SSM260x chips have an internal MCLK /2 divider (bit D7 in register
R8). Add logic that allows for more MCLK values using this divider.
Signed-off-by: Paweł Anikiel <pan@semihalf.com>
Link: https://lore.kernel.org/r/20230414140203.707729-7-pan@semihalf.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cs35l56_remove() always returns 0. Two of the functions that call
it are void and the other one should only return 0. So there's no
point returning anything from cs35l56_remove().
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230414133753.653139-6-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
dsp_ready_completion is redundant and can be replaced by a call
flush_work() to wait for cs35l56_dsp_work() to complete.
As the dsp_work is queued by component_probe() it must run before other
ASoC component callbacks and therefore there is no risk of calling
flush_work() before the dsp_work() has been queued.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230414133753.653139-5-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Moving the wait from the beginning of the cs35l56_dsp_work() into
cs35l56_component_probe() will prevent the limbo situation that is an
artifact of the two stage SoundWire driver probe and initialisation
where the card is all registered and shows in ALSA but doesn't actually
work because the hardware didn't enumerate.
The other bus drivers perform the probe and init sequentially and are
not susceptible to this issue.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230414133753.653139-4-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There is no reason to have such a tight usleep range of 400us and it is
acceptable to allow MIN_US * 2.
Also wrap the usleep in an inline function.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/168147949455.26.3401634900657387799@mailman-core.alsa-project.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The irq member was being set before calling the init function and then
cs35l56_irq_request() was called only when the init was successful.
However cs35l56_release() calls devm_free_irq() when the irq member is
set and therefore if init() fails then this will cause an attempted free
of an unallocated IRQ.
Instead pass the desired IRQ number to the cs35l56_irq_request()
function and set cs35l56->irq only when it has been successfully
allocated.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/168147949598.26.711670799488943454@mailman-core.alsa-project.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Change the original fixed delay to the assignment from property. It will make
more flexible to different platforms for avoiding pop noise at the beginning
of recording.
Signed-off-by: David Lin <CTLIN0@nuvoton.com>
Link: https://lore.kernel.org/r/20230414103941.39566-2-CTLIN0@nuvoton.com
Signed-off-by: Mark Brown <broonie@kernel.org>
- Configure the default gound switch delay time before enabling IRQ
to avoid the unexpected delay time is set up
- Apply DA7219 AAD own work queue to handle AAD events
- Replace msleep with queue_delayed_work to have better relability
This commit improves the control of ground switches in AAD IRQ
Signed-off-by: David Rau <David.Rau.opensource@dm.renesas.com>
Link: https://lore.kernel.org/r/20230413024134.8612-1-David.Rau.opensource@dm.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
These Lenovo laptops use Realtek HDA codec combined with
2xCS35L41 Amplifiers using I2C with External Boost.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230412160531.182007-1-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Merge series from Richard Fitzgerald <rf@opensource.cirrus.com>:
This set of patches adds handling for system suspend.
Patches 1..4 make some code changes that simplify the
suspend implementation, mainly to avoid race conditions.
There are two seperate aspects to suspend, and these have
been done as two patches:
- the main suspend-resume handling,
- re-loading the firmware if necessary after resume.
Check during cs35l56_system_resume() whether the firmware patch must
be applied again.
The FIRMWARE_MISSING flag in the PROTECTION_STATUS register indicates
whether the firmware has been patched.
In non-secure mode the FIRMWARE_MISSING flag is cleared at the end of
dsp_work(). If it is set after system-resume we know that dsp_work()
must be run again.
In secure mode the pre-OS loader will have done the secure patching
and cleared the FIRMWARE_MISSING flag. So this flag does not tell us
whether firmware memory was lost. But the driver could only be
downloading non-secure tunings, which is always safe to do.
If the driver has control of RESET we will have asserted it during
suspend so the firmware patch will have been lost. The driver would only
have control of RESET in non-secure mode.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/168122674550.26.8545058503709956172@mailman-core.alsa-project.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Delete the 'removing' flag and don't kick init_completion to make a
quick cancel of dsp_work(). Just let it timeout on the wait for the
completion.
Simplify the code to standard cancelling or flushing of the work.
This avoids introducing corner cases from a layer of custom signalling.
It also avoids potential race conditions when system-suspend handling
is added.
Unless the hardware is broken, the dsp_work() will already have started
and passed the completion before the driver would want to cancel it.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/168122674746.26.16881587647873355224@mailman-core.alsa-project.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This adds the main handling for system suspend but does not handle
re-patching the firmware after system resume.
This is a multi-stage suspend and resume because if there is a
RESET line it is almost certain that it will be shared by all the
amps. So every amp must have done its suspend before we can
assert RESET. Likewise we must de-assert RESET before the amps
can resume.
It's preferable to assert RESET before we turning off regulators, and
while they power up.
The actual suspend and resume is done by using the pair
pm_runtime_force_suspend() and pm_runtime_force_resume() to
re-use our runtime suspend/resume sequences.
pm_runtime_force_suspend() will disable our pm_runtime. If we were
runtime-resumed it calls our runtime_suspend().
pm_runtime_force_resume() re-enables pm_runtime and if we were
originally runtime-resumed before the pm_runtime_force_suspend()
it calls our runtime_resume(). Otherwise it leaves us
runtime-suspended.
The general process is therefore:
suspend() -> finish dsp_work and then run our runtime_suspend
suspend_late() -> assert RESET and turn off supplies
resume_early() -> enable supplies and de-assert RESET
resume() -> pm_runtime_force_resume()
In addition, to prevent the IRQ handler running in the period
between pm_runtime_force_suspend() and pm_runtime_force_resume()
the parent IRQ is temporarily disabled:
- from suspend until suspend_noirq
- from resume_noirq until resume
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230411152528.329803-6-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When we are resuming from a system suspend the CS35L56 has probably
been hard reset (usually a power-on reset). So we must wait for the
firmware to boot. On SoundWire we also need it to re-initialize before
we can read the registers to check the CS35L56 state.
The simplest way to handle this is for runtime-resume to always wait
for firmware boot. If the firmware is already booted the overhead is
only one register read.
The system-resume will have to runtime-resume the driver anyway before
attempting any register access. So this will automatically include the
wait for initialization on SoundWire.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230411152528.329803-5-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
At the start of dsp_work() only wait for init_completion if !init_done.
This allows system suspend to re-queue dsp_work() without having to
do a dummy complete() of init_completion.
A dummy completion in system suspend would have to be conditional on
init_done. But that would create a possible race condition between our
system resume and cs35l56_init() in the corner case that we suspend right
after the SoundWire core has enumerated and reported ATTACHED.
It is safer and simpler to have cs35l56_init() as the only place that
init_completion is completed, and dsp_work() as the only place that
it is consumed.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230411152528.329803-4-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If we use a DAPM widget instead of mute_stream() to send the
PLAY command we can issue the plays to multiple amps in parallel.
With mute_stream each codec driver instance is called one at a
time so we get N * PS0 delay time.
DAPM does each stage on every widget in a card before moving to
the next stage. So all amps will do the PRE_PMU then all will do
the POST_PMU. The PLAY is sent in the PRE_PMU so that they all
power-up in parallel. After the PS0 wait in the first POST_PMU
all the other amps will also be ready so there won't be any extra
delay, or it will be negligible.
There's also no point waiting for the MBOX ack in the PRE_PMU.
We won't see a PS0 state in POST_PMU if it didn't ack the PLAY
command. So we can save a little extra time.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230411152528.329803-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We have SOF and generic ACP support enabled for Rembrandt and
pheonix platforms on some machines. Since we have same PCI id
used for probing, add check for machine configuration flag to
avoid conflict with newer pci drivers. Such machine flag has
been initialized via dmi match on few Chrome machines. If no
flag is specified probe and register older platform device.
Signed-off-by: Syed Saba Kareem <Syed.SabaKareem@amd.com>
Reviewed-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20230412091638.1158901-1-Syed.SabaKareem@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Smatch complains that missing unwind goto in tas5720_codec_probe.
When tas5720 has an invalid devtype, it is expected to invoke
regulator_bulk_disable to handle the failure. But the default
option return an error code directly. Fix it by reusing the
probe_fail label.
Signed-off-by: Ying Liu <lyre@hust.edu.cn>
Link: https://lore.kernel.org/r/20230411170912.1939906-1-lyre@hust.edu.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
The patch to make DSPless mode work even if the DSP is
disabled in BIOS missed to touch the MTL code to add
the needed checks.
If the DSP is disabled this can lead to page fault due to not
accesible registers.
Fixes: 9fc6786f54 ("ASoC: SOF: Intel: hda: make DSPless mode work with DSP disabled in BIOS")
Signed-off-by: Fred Oh <fred.oh@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230412061457.27937-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
The following series adds the core support to handle the recently updated
HDaudio multi-link support to hanlde non HDA links, like SoundWire/DMIC/SSP on
Intel platform.
For details, please see the first patch which documents the current mlink
support (introduced at Skylake) and the new extensions, arriving with LNL.
There is no change in functionality for existing HDA support, the extension is
backwards compatible with existing implementations.
Merge series from Alexander Sverdlin <alexander.sverdlin@gmail.com>:
This is a preparatory series for EP93xx transition to DT. This patchset is
a pre-requisite and has been tested with the full DT patchset [1].
[1]. git://git.maquefel.me/linux.git branch ep93xx/6.2-rc4-v0
Alexander Sverdlin (3):
ASoC: ep93xx: i2s: move enable call to startup callback
ASoC: cs4271: flat regcache, trivial simplifications
ASoC: ep93xx: i2s: Make it individually selectable
sound/soc/cirrus/Kconfig | 6 +++++-
sound/soc/cirrus/ep93xx-i2s.c | 12 +++++++++++-
sound/soc/codecs/cs4271-i2c.c | 1 -
sound/soc/codecs/cs4271-spi.c | 1 -
sound/soc/codecs/cs4271.c | 4 ++--
5 files changed, 18 insertions(+), 6 deletions(-)
--
2.40.0
Add missing of_node_put()s before the returns to balance
of_node_get()s and of_node_put()s, which may get unbalanced
in case the for loop 'for_each_available_child_of_node' returns
early.
Fixes: 4302187d95 ("ASoC: mediatek: common: add soundcard driver common code")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Julia Lawall <julia.lawall@inria.fr>
Link: https://lore.kernel.org/r/202304090504.2K8L6soj-lkp@intel.com/
Signed-off-by: Aashish Sharma <shraash@google.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Reviewed-by: Trevor Wu <trevor.wu@mediatek.com>
Link: https://lore.kernel.org/r/20230411003431.4048700-1-shraash@google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
- Switch to REGCACHE_FLAT, the whole overhead of RBTREE is not worth it
with non sparse register set in the address range 1..7.
- Move register width to central location
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Link: https://lore.kernel.org/r/20230410223902.2321834-3-alexander.sverdlin@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Make startup/shutdown callbacks symmetric to avoid clock subsystem warnings
(reproduced with "aplay --dump-hw-params" + ctrl-c):
WARNING: CPU: 0 PID: 102 at drivers/clk/clk.c:1048 clk_core_disable
lrclk already disabled
CPU: 0 PID: 102 Comm: aplay Not tainted 6.2.0-rc4 #1
Hardware name: Generic DT based system
...
clk_core_disable from clk_core_disable_lock
clk_core_disable_lock from ep93xx_i2s_shutdown
ep93xx_i2s_shutdown from snd_soc_dai_shutdown
snd_soc_dai_shutdown from soc_pcm_clean
soc_pcm_clean from soc_pcm_close
soc_pcm_close from snd_pcm_release_substream.part.0
snd_pcm_release_substream.part.0 from snd_pcm_release
snd_pcm_release from __fput
__fput from task_work_run
...
WARNING: CPU: 0 PID: 102 at drivers/clk/clk.c:907 clk_core_unprepare
lrclk already unprepared
CPU: 0 PID: 102 Comm: aplay Tainted: G W 6.2.0-rc4 #1
Hardware name: Generic DT based system
...
clk_core_unprepare from clk_unprepare
clk_unprepare from ep93xx_i2s_shutdown
ep93xx_i2s_shutdown from snd_soc_dai_shutdown
snd_soc_dai_shutdown from soc_pcm_clean
soc_pcm_clean from soc_pcm_close
soc_pcm_close from snd_pcm_release_substream.part.0
snd_pcm_release_substream.part.0 from snd_pcm_release
snd_pcm_release from __fput
__fput from task_work_run
...
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Link: https://lore.kernel.org/r/20230410223902.2321834-2-alexander.sverdlin@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ELF is acronym and therefore should be spelled in all caps.
I left one exception at Documentation/arm/nwfpe/nwfpe.rst which looks like
being written in the first person.
Link: https://lkml.kernel.org/r/Y/3wGWQviIOkyLJW@p183
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
... in wait_for_avail() and snd_pcm_drain().
t was calculated in seconds, so it would be pretty much always zero, to
be subsequently de-facto ignored due to being max(t, 10)'d. And then it
(i.e., 10) would be treated as secs, which doesn't seem right.
However, fixing it to properly calculate msecs would potentially cause
timeouts when using twice the period size for the default timeout (which
seems reasonable to me), so instead use the buffer size plus 10 percent
to be on the safe side ... but that still seems insufficient, presumably
because the hardware typically needs a moment to fire up. To compensate
for this, we up the minimal timeout to 100ms, which is still two orders
of magnitude less than the bogus minimum.
substream->wait_time was also misinterpreted as jiffies, despite being
documented as being in msecs. Only the soc/sof driver sets it - to 500,
which looks very much like msecs were intended.
Speaking of which, shouldn't snd_pcm_drain() also use substream->
wait_time?
As a drive-by, make the debug messages on timeout less confusing.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230405201219.2197774-1-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
smatch reports
sound/soc/mediatek/mt8186/mt8186-afe-gpio.c:14:16: warning: symbol
'aud_pinctrl' was not declared. Should it be static?
This variable is only used in one file so should be static.
Signed-off-by: Tom Rix <trix@redhat.com>
Link: https://lore.kernel.org/r/20230407115553.1968111-1-trix@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The format_val is a set of bitfileds, printing it as a decimal just makes
interpreting it complicated.
In other HDA core code the format_val is printed as hexadecimal also.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Jaska Uimonen <jaska.uimonen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20230406155219.18997-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Wake IO1 from power gating if there is SoundWire enabled link discovered
by ACPI scan.
Signed-off-by: Yong Zhi <yong.zhi@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230406154454.18163-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Boards were using this in older kernels before adl and rpl ids were
split. Add this back to maintain support.
Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230406153703.17194-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In order to avoid pop noise which occurs when switching
device from speaker to headphone, the amplifier should
power down first when stopping playback.
Signed-off-by: Long Wang <long.wang@analog.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20230406154535.18205-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For SoundWire usages, we need to use the global eml_lock to
serialize/protect all accesses to shared registers. Due to the split
implementation across two subsystems, we need to pass a pointer
around.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20230404104127.5629-19-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For DMIC and SSP, the DSP will be responsible for programming the
blobs and link registers.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20230404104127.5629-18-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Small helpers to make DAI ops simpler.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20230404104127.5629-17-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Each SoundWire peripheral can be programmed from the manager side
either with a regular command FIFO, or with the HDaudio CORB/RIRB
DMA-based mechanism. The mapping between SoundWire peripheral and SDI
address is handled with the LSDIID register.
This mapping only works of course if each peripheral has a unique
address across all links. This has already been enforced in previous
Intel contributions allowing for an IDA-based solution for the device
number allocation.
The checks on the dev_num are handled at the SoundWire level, but the
locking is handled at the hda-mlink level.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20230404104127.5629-16-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This helper is an optimization where sync_go is only called when the
cmdsync field is actually set to a non-zero value.
Since this is also only used by SoundWire for now, only expose the
_unlocked version.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20230404104127.5629-15-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The multi-link synchronization uses the same concept and registers,
but moved to the HDAudio extended links.
Add helpers for sync_arm and sync_go which are the basic for the bus
reset, bank switch and clock stop.
Since SoundWire is the only user of those helpers, only expose the
_unlocked versions for now.
Note that SYNCGO is a write-only bit, so no error can be reported. We
still return 0 for compatibility with the SoundWire stream management
headers.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20230404104127.5629-14-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
These helpers configure the ratio between the base clock and the
hardware signal used for link synchronization.
The SYNCPRD is written before the first sublink is powered-up. The
SYNCPU bit is set, but it will only be cleared after the link is
powered-up, hence the implementation with a set/wait pattern.
These helpers are currently only needed by SoundWire support, where
the lock is taken at a higher level, so only the _unlocked versions
are exposed for now.
Note that the _wait_bit() implementation is similar to previous
helpers in drivers/soundwire, but with sleep duration and timeout
aligned with hardware recommendations. If desired, this helper could
be modified in a second step with e.g. readl_poll_timeout().
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20230404104127.5629-13-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When INTC is set, LCTL exposes INTEN and INTSTS fields.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20230404104127.5629-12-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This is needed for SoundWire integration.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20230404104127.5629-11-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The updated SoundWire Intel driver will need to rely on Extended
HDaudio links for power management, but it doesn't need to be aware of
all the HDaudio structures. Add convenience helpers to avoid polluting
SoundWire drivers too much with HDaudio information.
Since the SoundWire/Intel solution already takes the lock at a higher
level, the _unlocked PM helpers are used.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20230404104127.5629-10-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add helpers to program SPA/CPA bits, using a mutex to access the
shared LCTL register if required.
All links are managed with the same LCTLx.SPA bits. However there are
quite a few implementation details to be aware of:
Legacy HDaudio multi-links are powered-up when exiting reset, which
requires the ref_count to be manually set to one when initializing the
link.
Alternate links for SoundWire/DMIC/SSP need to be explicitly
powered-up before accessing the SHIM/IP/Vendor-Specific SHIM space for
each sublink. DMIC/SSP/SoundWire are all different cases with a
different device/dai/hlink relationship.
SoundWire will handle power management with the auxiliary device
resume/suspend routine. The ref_count is not necessary in this case.
The DMIC/SSP will by contrast handle the power management from DAI
.startup and .shutdown callbacks.
The SSP has a 1:1 mapping between sublink and DAI, but it's
bidirectional so the ref_count will help avoid turning off the sublink
when one of the two directions is still in use.
The DMIC has a single link but two DAIs for data generated at
different sampling frequencies, again the ref_count will make sure the
two DAIs can be used concurrently.
And last the SoundWire Intel require power-up/down and bank switch to
be handled with a lock already taken, so the 'eml_lock' is made
optional with the _unlocked versions of the helpers.
Note that the _check_power_active() implementation is similar to
previous helpers in sound/hda/ext, with sleep duration and timeout
aligned with hardware recommendations. If desired, this helper could
be modified in a second step with .e.g. readl_poll_timeout()
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20230404104127.5629-9-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For backwards compatibility, HDaudio/iDISP links are powered-on when
exiting reset, and the existing driver forces them to be powered-off
when entering S0ix. In addition, the get/put helpers are invoked
directly by the ASoC codec drivers, which a historical layering
violation.
Extended links are powered-on by software only, during the probe and
DAI startup phases. This calls for a different handling of the
'regular' and 'extended' audio links.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20230404104127.5629-8-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Extend hdac_ext_link to store information needed for ALT
links. Follow-up patches will include more functional patches for
power-up and down.
Note that this patch suggests the use of an 'eml_lock' to serialize
access to shared registers. SoundWire-specific sequence require the
lock to be taken at a higher level, as a result the helpers added in
follow-up patches will provide 'unlocked' versions when needed.
Also note that the low-level sequences with the 'hdaml_' prefix are
taken directly from the hardware specifications - naming conventions
included. The code will be split in two, with locking and linked-list
management handled separately to avoid mixing required hardware setup
and Linux-based resource management.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20230404104127.5629-7-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some of the functions will be used for SoundWire enumeration and power
management, to avoid cycles in module dependencies and simplify
integration all the HDaudio multi-link needs to move to a dedicated
module.
Drop no longer needed headers at the same time.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20230404104127.5629-6-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add return value - this will need additional work in the caller.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20230404104127.5629-5-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use list_for_each_entry_safe() instead of open-coding.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20230404104127.5629-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Make sure SoundWire lcount helpers have unique error logs, but a
common pattern for reporting issues.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20230406152937.15347-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
smatch reports
sound/soc/codecs/max98363.c:392:39: warning: symbol
'soc_codec_dev_max98363' was not declared. Should it be static?
This variable is only used in one file so should be static.
Signed-off-by: Tom Rix <trix@redhat.com>
Link: https://lore.kernel.org/r/20230406152300.1954292-1-trix@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Srinivas Kandagatla <srinivas.kandagatla@linaro.org>:
Click/Pop Noise was a long pending issue with WSA Codecs which are prone
to accumlate DC when ports are active but without any data streams.
There are multiple places in the current setup, where this could happen
in both startup as well as shutdown path.
Smatch Warns:
sound/firewire/tascam/tascam-stream.c:493 snd_tscm_stream_start_duplex()
warn: missing unwind goto?
The direct return will cause the stream list of "&tscm->domain" unemptied
and the session in "tscm" unfinished if amdtp_domain_start() returns with
an error.
Fix this by changing the direct return to a goto which will empty the
stream list of "&tscm->domain" and finish the session in "tscm".
The snd_tscm_stream_start_duplex() function is called in the prepare
callback of PCM. According to "ALSA Kernel API Documentation", the prepare
callback of PCM will be called many times at each setup. So, if the
"&d->streams" list is not emptied, when the prepare callback is called
next time, snd_tscm_stream_start_duplex() will receive -EBUSY from
amdtp_domain_add_stream() that tries to add an existing stream to the
domain. The error handling code after the "error" label will be executed
in this case, and the "&d->streams" list will be emptied. So not emptying
the "&d->streams" list will not cause an issue. But it is more efficient
and readable to empty it on the first error by changing the direct return
to a goto statement.
The session in "tscm" has been begun before amdtp_domain_start(), so it
needs to be finished when amdtp_domain_start() fails.
Fixes: c281d46a51 ("ALSA: firewire-tascam: support AMDTP domain")
Signed-off-by: Xu Biang <xubiang@hust.edu.cn>
Reviewed-by: Dan Carpenter <error27@gmail.com>
Acked-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230406132801.105108-1-xubiang@hust.edu.cn
Signed-off-by: Takashi Iwai <tiwai@suse.de>
unpreparing/disabling and preparing/reenabling soundwire ports is not required
for every prepare call, this add lots of click and pop noise if we do this in
middle of playback or capture.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230323164403.6654-3-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
On multiple prepare calls, its possible that the playback graphs are
not unloaded from the DSP, which can have some wierd side-effects,
one of them is that the data not consumed without any errors.
Fixes: c2ac3aec474d("ASoC: qcom: q6apm-lpass-dai: unprepare stream if its already prepared")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230323164403.6654-2-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This is the initial codec driver for rt712 SDCA (Mic topology).
The host should connect with rt712 SdW2 interface.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://lore.kernel.org/r/20230406085535.52002-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
dapm_connect_dai_pair() handles
"Normal/Codec2Codec" x "CPU/Codec" x "Playback/Capture".
(A) is "Codec2Codec" case of "CPU" widget x "Playback/Capture",
(B) is "Normal" case of "CPU" widget x "Playback/Capture",
(C) is each case of "Codec" widget.
(X) is handling "Playback" case DAI connecting,
(Y) is handling "Capture" case DAI connecting.
static void dapm_connect_dai_pair(...)
{
...
(A) if (dai_link->params) {
playback_cpu = ...
capture_cpu = ...
(B) } else {
playback_cpu = ...
capture_cpu = ...
}
^ /* connect BE DAI playback if widgets are valid */
| stream = SNDRV_PCM_STREAM_PLAYBACK;
| (C) codec = codec_dai->playback_widget;
|
| if (playback_cpu && codec) {
(X) if (dai_link->params && !rtd->c2c_widget[stream]) {
| ...
| }
|
| (z) dapm_connect_dai_routes(...);
v }
capture:
^ /* connect BE DAI capture if widgets are valid */
| stream = SNDRV_PCM_STREAM_CAPTURE;
| (C) codec = codec_dai->capture_widget;
|
| if (codec && capture_cpu) {
(Y) if (dai_link->params && !rtd->c2c_widget[stream]) {
| ...
| }
|
| (z) dapm_connect_dai_routes(...);
v }
}
(X) part and (Y) part are almost same.
Main purpose of these parts (and this function) is calling
dapm_connect_dai_routes() (= z) on each cases.
The difference is "parameter"
(= Normal/Codec2Codec x CPU/Codec x Playback/Capture).
This patch cleanup these, but nothing changed for meaning.
Link: https://lore.kernel.org/r/87ilen6ni4.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/877cuqvswc.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The newer E-MU cards weren't mentioned at all.
The "partially supported" is removed ahead of it becoming mostly untrue.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230405201220.2197908-1-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
It could have never worked, as snd_emu10k1_fx8010_playback_prepare() and
snd_emu10k1_fx8010_playback_hw_free() assume the emu10k1 offset for the
ETRAM, and the default DSP code includes no handler for it. It also
wouldn't make a lot of sense to make it work, as Audigy has an own, much
simpler, pass-through mechanism. So just skip creation of the device.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230405201220.2197938-1-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Due to two copy/pastos, closing the MIC or EFX capture device would
make a running ADC capture hang due to unsetting its interrupt handler.
In principle, this would have also allowed dereferencing dangling
pointers, but we're actually rather thorough at disabling and flushing
the ints.
While it may sound like one, this actually wasn't a hypothetical bug:
PortAudio will open a capture stream at startup (and close it right
away) even if not asked to. If the first device is busy, it will just
proceed with the next one ... thus killing a concurrent capture.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230405201220.2197923-1-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The BIOS botches this one completely - it says the 2nd S/PDIF output is
used, while in fact it's the 1st one. This is tested on DP45SG, but I'm
assuming it's valid for the other boards in the series as well.
Also add some comments regarding the pins.
FWIW, the codec is apparently still sold by Tempo Semiconductor, Inc.,
where one can download the documentation.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230405201220.2197826-2-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Like the other boards from the D*45* series, this one sets up the
outputs not quite correctly.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230405201220.2197826-1-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_cs8427_iec958_active() would always delete
SNDRV_CTL_ELEM_ACCESS_INACTIVE, even though the function has an
argument `active`.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230405201219.2197811-1-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ASoC is now using c2c_params instead of params. This patch replace it.
num_c2c_params (was num_params) was not mandatory before,
but let's set it by this patch.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87jzytc2kp.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC is now using c2c_params instead of params. This patch replace it.
num_c2c_params (was num_params) was not mandatory before,
but let's set it by this patch.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87lej9c2ky.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_dai_link has params/num_params, but it is unclear that
params for what. This patch clarify it is params for Codec2Codec.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87o7o5c2lk.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
With PCI if the device was suspended it is brought back to full
power and then suspended again.
This doesn't happen when device is described via DT.
We need to make sure that we tear down pipelines only if the device
was previously active (thus the pipelines were setup).
Otherwise, we can break the use_count:
[ 219.009743] sof-audio-of-imx8m 3b6e8000.dsp:
sof_ipc3_tear_down_all_pipelines: widget PIPELINE.2.SAI3.IN is still in use: count -1
and after this everything stops working.
Fixes: d185e0689a ("ASoC: SOF: pm: Always tear down pipelines before DSP suspend")
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20230405092655.19587-1-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
This series will add support for SOF Linux stack to run without using the DSP.
DSPless mode provides a good tool for verification that the hardware itself
works correctly by taking the DSP use out from the picture.
It can only work with interfaces which supports this mode: Intel HDA at the
moment but with LNL it could be possible to support other audio interfaces.
The main driver for this mode is to be able to test programming sequences,
low-level code and for low-level verification of a platform.
The feature is not targetted for end-users and it will not make the SOF stack
to work on hardware without DSP, but it is giving us a tool to debug and enable
platforms earlier (when for example t he firmware is not mature enough).
Smatch Warns:
sound/soc/tegra/tegra20_ac97.c:321 tegra20_ac97_platform_probe()
warn: missing unwind goto?
The goto will set the "soc_ac97_ops" and "soc_ac97_bus" operations to
NULL. But they are already NULL at this point so it is a no-op.
However, just for consistency, change the direct return to a goto. No
functional change.
Signed-off-by: Zihao Wang <u202012060@hust.edu.cn>
Reviewed-by: Dan Carpenter <error27@gmail.com>
Link: https://lore.kernel.org/r/20230404084622.1202-1-u202012060@hust.edu.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
set the dspless_mode_supported flag to true for tgl/adl family to allow
DSPless mode.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20230404092115.27949-13-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
set the dspless_mode_supported flag to true for skl family to allow
DSPless mode.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20230404092115.27949-12-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
set the dspless_mode_supported flag to true for mtl family to allow
DSPless mode.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20230404092115.27949-11-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
set the dspless_mode_supported flag to true for icl/jsl family to allow
DSPless mode.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20230404092115.27949-10-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
set the dspless_mode_supported flag to true for cnl/cfl/cml family to
allow DSPless mode.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20230404092115.27949-9-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
set the dspless_mode_supported flag to true for apl family to allow
DSPless mode.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20230404092115.27949-8-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When the DSP is disabled in the BIOS, the DSP_BAR and PP_BAR cannot be
accessed.
One possible objection noted in initial reviews is that this patch
adds a number of branches. However the number of branches is actually
limited in probe/suspend/resume routines mostly, so there isn't really
a degradation in terms of readability and maintainability. Adding yet
another level of abstraction/ops/callbacks would increase complexity
and not really help in terms of code reuse or readability and
maintainability. A split between controller and DSP driver would be
even more invasive.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230404092115.27949-7-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Via the SOF_DBG_DSPLESS_MODE sof_debug flag the SOF stack can be asked to
not use the DSP for audio.
The use of DSPless mode is governed by the sdev->dspless_mode_selected
flag which is only going to be set if the user sets sof_debug=0x8000 and
the platform advertises that the DSPless mode is supported on them.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20230404092115.27949-6-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Not all interfaces (SSP/DMIC/HDA/SDW) are available on all platforms.
If the interface is not even supported then there is no point in executing
a probe or query for that interface.
Introduce a simple function (hda_get_interface_mask) to query the
interfaces supported on the platform.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20230404092115.27949-5-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Via the SOF_DBG_DSPLESS_MODE sof_debug flag the SOF stack can be asked to
not use the DSP for audio.
The core's support for DSPless mode is only going to be enabled if the
platform reports that it can be used without DSP.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20230404092115.27949-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The DSPless mode of the ASoC/SOF driver can be used for hardware
verification and debug on platforms with HDaudio codecs. The DSP mode is
still needed on existing platforms for SSP, DMIC, SoundWire interfaces
managed by the GP-DMA.
This mode is also helpful to compare the legacy HDaudio driver with the
ASoC/SOF driver wrt. codec management and handling. In theory we use the
same code but differences are sometimes seen on jack detection and event
handling.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20230404092115.27949-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Only access hext_stream->hstream after it has been checked for NULL pointer
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20230404092115.27949-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There are many log messages scattered throughout the mt8186 sound
drivers, and they are frequently triggered.
To avoid spamming the console, move these messages to the debug level.
Signed-off-by: Allen-KH Cheng <allen-kh.cheng@mediatek.com>
Link: https://lore.kernel.org/r/20230329080418.1100-1-allen-kh.cheng@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ACP SOF driver supports different audio configurations.
Explicit condition check for I2S configuration will break
other audio endpoint configurations.
acp_dai_probe() function is not required as we have
machine select logic to select the exact machine.
Remove acp_dai_probe() from existing AMD PCI driver code base.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20230403071651.919027-2-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
During initial SOF driver bring up on AMD platforms, only DMIC
support was added. As of today, we have a complete SOF solution for
I2S endpoints along with DMIC endpoint.
This code is no longer required.
Remove unused code from RMB and RN platform ACP PCI driver.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20230403071651.919027-1-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This model requires an additional detection quirk to enable the internal microphone.
Signed-off-by: Prajna Sariputra <putr4.s@gmail.com>
Link: https://lore.kernel.org/r/2283110.ElGaqSPkdT@n0067ax-linux62
Signed-off-by: Mark Brown <broonie@kernel.org>
The original patch uses a feature in lib/vsprintf.c to handle the invalid
address when tring to print *_fw_module->man4_module_entry.name when the
*rc_fw_module is NULL.
This case is handled by check_pointer_msg() internally and turns the
invalid pointer to '(efault)' for printing but it is hiding useful
information about the circumstances. Change the print to emmit the name
of the widget and a note on which side's fw_module is missing.
Fixes: e3720f92e0 ("ASoC: SOF: avoid a NULL dereference with unsupported widgets")
Reported-by: Dan Carpenter <error27@gmail.com>
Link: https://lore.kernel.org/alsa-devel/4826f662-42f0-4a82-ba32-8bf5f8a03256@kili.mountain/
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Rule: 'Cc: stable@vger.kernel.org' or 'commit <sha1> upstream.'
Link: https://lore.kernel.org/r/20230403090909.18233-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We need the fixes in here for testing, as well as the driver core
changes for documentation updates to build on.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When a DRM driver turns on or off the screen with the audio
capability, it notifies the ELD to HD-audio HDMI codec driver via
component ops. HDMI codec driver, in turn, attaches or detaches the
PCM stream for the given port on the fly.
The problem is that, since the recent code change, the HDMI driver
always treats the PCM stream assignment dynamically; this ended up the
confusion of the PCM device appearance. e.g. when a screen goes once
off and on again, it may appear on a different PCM device before the
screen-off. Although the application should treat such a change, it
doesn't seem working gracefully with the current pipewire (maybe
PulseAudio, too).
As a workaround, this patch changes the HDMI codec driver behavior
slightly to be more consistent. Now it remembers the previous PCM
slot for the given port and try to assign to it. That is, if a port
is re-enabled, the driver tries to use the same PCM slot that was
assigned to that port previously. If it conflicts, a new slot is
searched and used like before, instead.
Note that multiple monitor connections are the only typical case where
the PCM slot preservation is effective. As long as only a single
monitor is connected, the behavior isn't changed, and the first PCM
slot is still assigned always.
Fixes: ef6f5494fa ("ALSA: hda/hdmi: Use only dynamic PCM device allocation")
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217259
Link: https://lore.kernel.org/r/20230331142217.19791-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
More fixes for v6.3, plus a few new trivial device ID additions.
Almost all of this is for the Intel drivers, though there is one
core fix from Shengjiu which ensures that format constraints are
correctly applied in some cases where they were missed.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmQnBY4ACgkQJNaLcl1U
h9Bmewf/TPpQF/f9puKKJYYWF7qkJIh1VuV930O/0ioXxN4JuPYadZ0ORlhYoAT8
WNzkLCogaRUpxvQZsg90Fsceefer1ayutxIbV4cAw9zsSA3PJxz6x4/3zvXIzVOW
T4dlLl4OallXxZN1hSVmwAGkAWmQrmc4liPieE8VSiSIB0DazMN7v5eIKK0ffpzx
Cr3Hge1ebg7Fd5/nxoK3gLHWP7Abl/tU7sJf11QKXmev96cZS6zEsGGRsqVqzywD
VxMwjZHgX5ycShflGUHpu51TwBSzJz6sWvcLU77ojnXjIU5DgRqL0x6spvLTso1A
9ekQk9tYu7zWWPi1dKCM9JgzejQXqA==
=5r/n
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v6.3-rc4' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.3
More fixes for v6.3, plus a few new trivial device ID additions.
Almost all of this is for the Intel drivers, though there is one
core fix from Shengjiu which ensures that format constraints are
correctly applied in some cases where they were missed.
There is a HP ProBook which using ALC236 codec and need the
ALC236_FIXUP_HP_MUTE_LED_MICMUTE_VREF quirk to make mute LED and
micmute LED work.
Signed-off-by: Andy Chi <andy.chi@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230331083242.58416-1-andy.chi@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Added Analog Devices MAX98363 SoundWire Amplifier Driver.
The MAX98363 is a SoundWire peripheral device that supports
MIPI SoundWire v1.2-compatible digital interface for audio and
control data.
Signed-off-by: Ryan Lee <ryans.lee@analog.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230330234319.6841-1-ryan.lee.analog@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In preparation for switching single segment iterators to using ITER_UBUF,
swap the check for whether we are user backed or not.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This returns a pointer to the current iovec entry in the iterator. Only
useful with ITER_IOVEC right now, but it prepares us to treat ITER_UBUF
and ITER_IOVEC identically for the first segment.
Rename struct iov_iter->iov to iov_iter->__iov to find any potentially
troublesome spots, and also to prevent anyone from adding new code that
accesses iter->iov directly.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently we sequence speakers with line and headphone outputs in DAPM.
This works well when speakers are integrate into a CODEC but when there is
an external speaker driver connected to a line or headphone output it can
mean that the speaker driver ends up getting sequenced such that it picks
up pops and clicks from the CODEC. Mask this by moving speakers after the
other outputs in DAPM.
We may want to consider doing this for headphones too but separate drivers
are less common there and headphone drivers often also function as line
outputs so the situation is less clear.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230324-asoc-dapm-spk-v1-1-e1f27f766505@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
On SOF, many topology is assuming dai_link->platform exists, and is
allowed to be overwritten on each link_load().
This patch restore the removed dai_link->platform for SOF, and add
the comment.
Fixes: e7098ba9b3 ("ASoC: soc-topology.c: remove unnecessary dai_link->platform")
Reported-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/87jzz7jczp.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/87v8ikcsr5.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Using a dynamic allocation to store a single pointer is not very
efficient/useful.
Worse, the memory is released in the SoundWire stream.c file, but
still accessed in the DAI shutdown, leading to kmemleak reports.
And last the API requires the previous stream information to be
cleared when the argument is NULL.
Simplify the code to address all 3 problems.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230324014408.1677505-14-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Using a dynamic allocation to store a single pointer is not very
efficient/useful.
Worse, the memory is released in the SoundWire stream.c file, but
still accessed in the DAI shutdown, leading to kmemleak reports.
And last the API requires the previous stream information to be
cleared when the argument is NULL.
Simplify the code to address all 3 problems.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230324014408.1677505-13-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Using a dynamic allocation to store a single pointer is not very
efficient/useful.
Worse, the memory is released in the SoundWire stream.c file, but
still accessed in the DAI shutdown, leading to kmemleak reports.
And last the API requires the previous stream information to be
cleared when the argument is NULL.
Simplify the code to address all 3 problems.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230324014408.1677505-12-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Using a dynamic allocation to store a single pointer is not very
efficient/useful.
Worse, the memory is released in the SoundWire stream.c file, but
still accessed in the DAI shutdown, leading to kmemleak reports.
And last the API requires the previous stream information to be
cleared when the argument is NULL.
Simplify the code to address all 3 problems.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230324014408.1677505-11-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Using a dynamic allocation to store a single pointer is not very
efficient/useful.
Worse, the memory is released in the SoundWire stream.c file, but
still accessed in the DAI shutdown, leading to kmemleak reports.
And last the API requires the previous stream information to be
cleared when the argument is NULL.
Simplify the code to address all 3 problems.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230324014408.1677505-10-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Using a dynamic allocation to store a single pointer is not very
efficient/useful.
Worse, the memory is released in the SoundWire stream.c file, but
still accessed in the DAI shutdown, leading to kmemleak reports.
And last the API requires the previous stream information to be
cleared when the argument is NULL.
Simplify the code to address all 3 problems.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230324014408.1677505-9-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Using a dynamic allocation to store a single pointer is not very
efficient/useful.
Worse, the memory is released in the SoundWire stream.c file, but
still accessed in the DAI shutdown, leading to kmemleak reports.
And last the API requires the previous stream information to be
cleared when the argument is NULL.
Simplify the code to address all 3 problems.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230324014408.1677505-8-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Using a dynamic allocation to store a single pointer is not very
efficient/useful.
Worse, the memory is released in the SoundWire stream.c file, but
still accessed in the DAI shutdown, leading to kmemleak reports.
And last the API requires the previous stream information to be
cleared when the argument is NULL.
Simplify the code to address all 3 problems.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230324014408.1677505-7-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Using a dynamic allocation to store a single pointer is not very
efficient/useful.
Worse, the memory is released in the SoundWire stream.c file, but
still accessed in the DAI shutdown, leading to kmemleak reports.
And last the API requires the previous stream information to be
cleared when the argument is NULL.
Simplify the code to address all 3 problems.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230324014408.1677505-6-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Using a dynamic allocation to store a single pointer is not very
efficient/useful.
Worse, the memory is released in the SoundWire stream.c file, but
still accessed in the DAI shutdown, leading to kmemleak reports.
And last the API requires the previous stream information to be
cleared when the argument is NULL.
Simplify the code to address all 3 problems.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230324014408.1677505-5-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Using a dynamic allocation to store a single pointer is not very
efficient/useful.
Worse, the memory is released in the SoundWire stream.c file, but
still accessed in the DAI shutdown, leading to kmemleak reports.
And last the API requires the previous stream information to be
cleared when the argument is NULL.
Simplify the code to address all 3 problems.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230324014408.1677505-4-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Using a dynamic allocation to store a single pointer is not very
efficient/useful.
Worse, the memory is released in the SoundWire stream.c file, but
still accessed in the DAI shutdown, leading to kmemleak reports.
And last the API requires the previous stream information to be
cleared when the argument is NULL.
Simplify the code to address all 3 problems.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230324014408.1677505-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The API requires the stream info to be cleared when the argument is
NULL.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230324014408.1677505-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If an IPC4 topology contains an unsupported widget, its .module_info
field won't be set, then sof_ipc4_route_setup() will cause a kernel
Oops trying to dereference it. Add a check for such cases.
Cc: stable@vger.kernel.org # 6.2
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230329113828.28562-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
clang with W=1 reports
sound/pci/asihpi/hpi6000.c:1256:6: error: variable
'loop_count' set but not used [-Werror,-Wunused-but-set-variable]
u32 loop_count = 0;
^
This variable is not used so remove it.
Signed-off-by: Tom Rix <trix@redhat.com>
Link: https://lore.kernel.org/r/20230326205712.1358918-1-trix@redhat.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add support for the WSA macro codec on Qualcomm SM8550. SM8550 does not
use NPL clock, thus add flags allowing to skip it.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230327132254.147975-11-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for the TX macro codec on Qualcomm SM8550. SM8550 does not
use NPL clock, thus add flags allowing to skip it.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230327132254.147975-7-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for the RX macro codec on Qualcomm SM8550. SM8550 does not
use NPL clock, thus add flags allowing to skip it.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230327132254.147975-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
On SOF, many topology is assuming dai_link->platform exists, and is
allowed to be overwritten on each link_load().
This patch restore the removed dai_link->platform for SOF, and add
the comment.
Fixes: e7098ba9b3 ("ASoC: soc-topology.c: remove unnecessary dai_link->platform")
Reported-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/87jzz7jczp.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/87v8ikcsr5.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There's no need to switch between unsigned short and u16, especially since
all the functions that end up using old_legacy_ctrl specify u16 anyway.
Signed-off-by: Tasos Sahanidis <tasos@tasossah.com>
Link: https://lore.kernel.org/r/20230329043627.178899-1-tasos@tasossah.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
YMF744 and newer store the base IO ports in separate PCI config registers.
Since these registers were not restored, when set to a non-default value,
features that rely on them (FM, MPU401, gameport) were not functional
after restore, as their respective IO ports were reset to their defaults.
Signed-off-by: Tasos Sahanidis <tasos@tasossah.com>
Link: https://lore.kernel.org/r/20230329041440.177363-5-tasos@tasossah.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In preparation for storing more than two legacy PCI registers, the
existing ones are moved into a new array.
Signed-off-by: Tasos Sahanidis <tasos@tasossah.com>
Link: https://lore.kernel.org/r/20230329041440.177363-4-tasos@tasossah.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The registers were previously allocated when CONFIG_PM_SLEEP was set,
however this only saved an insignificant amount of memory otherwise.
Signed-off-by: Tasos Sahanidis <tasos@tasossah.com>
Link: https://lore.kernel.org/r/20230329041440.177363-3-tasos@tasossah.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Since commit 1a3c7bb088 ("PM: core: Add new *_PM_OPS macros, deprecate
old ones") SIMPLE_DEV_PM_OPS has been marked deprecated.
The intent is to remove CONFIG_PM_SLEEP guards for PM callbacks. As such
the ifdefs are now removed.
Signed-off-by: Tasos Sahanidis <tasos@tasossah.com>
Link: https://lore.kernel.org/r/20230329041440.177363-2-tasos@tasossah.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
As an end user, it can be confusing to request an arbitrary IO port be
used only to find out that it doesn't work without an obvious reason,
especially since /sys/module/snd_ymfpci/parameters/{fm,joystick,mpu}_port
indicate 0 after the module has been loaded.
In my case, I was unaware that the YMF724 did not support such usage, and
thus ended up spending time attempting to debug the issue.
Now, when a user attempts to request an IO port that isn't supported by
the hardware, the following message is printed:
[ 25.549530] snd_ymfpci 0000:06:05.0: The Yamaha DS-1 (YMF724F) does not support arbitrary IO ports for FM (requested 0x1234)
Signed-off-by: Tasos Sahanidis <tasos@tasossah.com>
Link: https://lore.kernel.org/r/20230329034204.171901-1-tasos@tasossah.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Merge series from Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>:
Hi,
Dependencies
============
For va-macro bindings:
https://lore.kernel.org/r/20221118071849.25506-2-srinivas.kandagatla@linaro.org
NOT a dependency
================
The patchset can be applied independently of my previous fix:
https://lore.kernel.org/linux-arm-msm/20230310100937.32485-1-krzysztof.kozlowski@linaro.org/T/#u
Logically, better if they were together, but code will work fine other way.
Changes since v1
================
1. Move the flag define to common header.
Best regards,
Krzysztof
Krzysztof Kozlowski (9):
ASoC: dt-bindings: qcom,lpass-rx-macro: narrow clocks per variants
ASoC: dt-bindings: qcom,lpass-rx-macro: Add SM8550 RX macro
ASoC: codecs: lpass-rx-macro: add support for SM8550
ASoC: dt-bindings: qcom,lpass-tx-macro: narrow clocks per variants
ASoC: dt-bindings: qcom,lpass-tx-macro: Add SM8550 TX macro
ASoC: codecs: lpass-tx-macro: add support for SM8550
ASoC: dt-bindings: qcom,lpass-va-macro: Add SM8550 VA macro
ASoC: dt-bindings: qcom,lpass-wsa-macro: Add SM8550 WSA macro
ASoC: codecs: lpass-wsa-macro: add support for SM8550
.../bindings/sound/qcom,lpass-rx-macro.yaml | 76 +++++++++++++----
.../bindings/sound/qcom,lpass-tx-macro.yaml | 81 +++++++++++++++----
.../bindings/sound/qcom,lpass-va-macro.yaml | 18 +++++
.../bindings/sound/qcom,lpass-wsa-macro.yaml | 23 +++++-
sound/soc/codecs/lpass-macro-common.h | 3 +
sound/soc/codecs/lpass-rx-macro.c | 36 +++++++--
sound/soc/codecs/lpass-tx-macro.c | 35 ++++++--
sound/soc/codecs/lpass-wsa-macro.c | 37 +++++++--
8 files changed, 252 insertions(+), 57 deletions(-)
--
2.34.1
The driver is able to work fine without relying on a mandatory interrupt
being assigned to the I2C device. This is only needed when making use of
the jack-detect support.
However, the following warning message is always emitted when there is
no such interrupt available:
es8316 0-0011: Failed to get IRQ 0: -22
Do not attempt to request an IRQ if it is not available/valid. This also
ensures the rather misleading message is not displayed anymore.
Also note the IRQ validation relies on commit dab472eb93 ("i2c /
ACPI: Use 0 to indicate that device does not have interrupt assigned").
Fixes: 8222576610 ("ASoC: es8316: Add jack-detect support")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230328094901.50763-1-cristian.ciocaltea@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for the WSA macro codec on Qualcomm SM8550. SM8550 does not
use NPL clock, thus add flags allowing to skip it.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230313075445.17160-9-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for the TX macro codec on Qualcomm SM8550. SM8550 does not
use NPL clock, thus add flags allowing to skip it.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230313075445.17160-6-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for the RX macro codec on Qualcomm SM8550. SM8550 does not
use NPL clock, thus add flags allowing to skip it.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230313075445.17160-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Current ASoC supports snd_soc_add_pcm_runtime(), but user need to
call it one-by-one if it has multi dai_links.
This patch adds snd_soc_add_pcm_runtimes() which supports multi
dai_links.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87h6u76nhq.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current Card2 Custom Sample will be too long Card name, and be error
audio-graph-card2-custom-sample audio-graph-card2-custom-sample \
ASoC: driver name too long \
audio-graph-card2-custom-sample' -> 'audio-graph-car'
This patch uses short name to avoid it
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87bkke7qzf.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
