Commit graph

21 commits

Author SHA1 Message Date
David Howells
dc97391e66 sock: Remove ->sendpage*() in favour of sendmsg(MSG_SPLICE_PAGES)
Remove ->sendpage() and ->sendpage_locked().  sendmsg() with
MSG_SPLICE_PAGES should be used instead.  This allows multiple pages and
multipage folios to be passed through.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for net/can
cc: Jens Axboe <axboe@kernel.dk>
cc: Matthew Wilcox <willy@infradead.org>
cc: linux-afs@lists.infradead.org
cc: mptcp@lists.linux.dev
cc: rds-devel@oss.oracle.com
cc: tipc-discussion@lists.sourceforge.net
cc: virtualization@lists.linux-foundation.org
Link: https://lore.kernel.org/r/20230623225513.2732256-16-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-24 15:50:13 -07:00
Oliver Hartkopp
ec095263a9 net: remove noblock parameter from recvmsg() entities
The internal recvmsg() functions have two parameters 'flags' and 'noblock'
that were merged inside skb_recv_datagram(). As a follow up patch to commit
f4b41f062c ("net: remove noblock parameter from skb_recv_datagram()")
this patch removes the separate 'noblock' parameter for recvmsg().

Analogue to the referenced patch for skb_recv_datagram() the 'flags' and
'noblock' parameters are unnecessarily split up with e.g.

err = sk->sk_prot->recvmsg(sk, msg, size, flags & MSG_DONTWAIT,
                           flags & ~MSG_DONTWAIT, &addr_len);

or in

err = INDIRECT_CALL_2(sk->sk_prot->recvmsg, tcp_recvmsg, udp_recvmsg,
                      sk, msg, size, flags & MSG_DONTWAIT,
                      flags & ~MSG_DONTWAIT, &addr_len);

instead of simply using only flags all the time and check for MSG_DONTWAIT
where needed (to preserve for the formerly separated no(n)block condition).

Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://lore.kernel.org/r/20220411124955.154876-1-socketcan@hartkopp.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-04-12 15:00:25 +02:00
Christoph Hellwig
a7b75c5a8c net: pass a sockptr_t into ->setsockopt
Rework the remaining setsockopt code to pass a sockptr_t instead of a
plain user pointer.  This removes the last remaining set_fs(KERNEL_DS)
outside of architecture specific code.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Stefan Schmidt <stefan@datenfreihafen.org> [ieee802154]
Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-24 15:41:54 -07:00
Christoph Hellwig
b6238c04c0 net/ipv4: remove compat_ip_{get,set}sockopt
Handle the few cases that need special treatment in-line using
in_compat_syscall().

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-19 18:16:41 -07:00
Alexey Kodanev
8f6b539285 udp: add missing rehash callback to udplite
After commit 4cdeeee925 ("net: udp: prefer listeners bound to an
address"), UDP-Lite only works when specifying a local address for
the sockets.

This is related to the problem addressed in the commit 719f835853
("udp: add rehash on connect()"). Moreover, __udp4_lib_lookup() now
looks for a socket immediately in the secondary hash table.

The issue was found with LTP/network tests (UDP-Lite test-cases).

Fixes: 4cdeeee925 ("net: udp: prefer listeners bound to an address")
Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-17 15:01:08 -08:00
Stefano Brivio
32bbd8793f net: Convert protocol error handlers from void to int
We'll need this to handle ICMP errors for tunnels without a sending socket
(i.e. FoU and GUE). There, we might have to look up different types of IP
tunnels, registered as network protocols, before we get a match, so we
want this for the error handlers of IPPROTO_IPIP and IPPROTO_IPV6 in both
inet_protos and inet6_protos. These error codes will be used in the next
patch.

For consistency, return sensible error codes in protocol error handlers
whenever handlers can't handle errors because, even if valid, they don't
match a protocol or any of its states.

This has no effect on existing error handling paths.

Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-08 17:13:08 -08:00
Greg Kroah-Hartman
b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00
Paolo Abeni
a3f96c47c8 udp: make *udp*_queue_rcv_skb() functions static
Since the udp memory accounting refactor, we don't need any more
to export the *udp*_queue_rcv_skb(). Make them static and fix
a couple of sparse warnings:

net/ipv4/udp.c:1615:5: warning: symbol 'udp_queue_rcv_skb' was not
declared. Should it be static?
net/ipv6/udp.c:572:5: warning: symbol 'udpv6_queue_rcv_skb' was not
declared. Should it be static?

Fixes: 850cbaddb5 ("udp: use it's own memory accounting schema")
Fixes: c915fe13cb ("udplite: fix NULL pointer dereference")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-18 10:23:33 -04:00
Eric Dumazet
30c7be26fd udplite: call proper backlog handlers
In commits 93821778de ("udp: Fix rcv socket locking") and
f7ad74fef3 ("net/ipv6/udp: UDP encapsulation: break backlog_rcv into
__udpv6_queue_rcv_skb") UDP backlog handlers were renamed, but UDPlite
was forgotten.

This leads to crashes if UDPlite header is pulled twice, which happens
starting from commit e6afc8ace6 ("udp: remove headers from UDP packets
before queueing")

Bug found by syzkaller team, thanks a lot guys !

Note that backlog use in UDP/UDPlite is scheduled to be removed starting
from linux-4.10, so this patch is only needed up to linux-4.9

Fixes: 93821778de ("udp: Fix rcv socket locking")
Fixes: f7ad74fef3 ("net/ipv6/udp: UDP encapsulation: break backlog_rcv into __udpv6_queue_rcv_skb")
Fixes: e6afc8ace6 ("udp: remove headers from UDP packets before queueing")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Benjamin LaHaise <bcrl@kvack.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-24 15:32:14 -05:00
Ying Xue
1b78414047 net: Remove iocb argument from sendmsg and recvmsg
After TIPC doesn't depend on iocb argument in its internal
implementations of sendmsg() and recvmsg() hooks defined in proto
structure, no any user is using iocb argument in them at all now.
Then we can drop the redundant iocb argument completely from kinds of
implementations of both sendmsg() and recvmsg() in the entire
networking stack.

Cc: Christoph Hellwig <hch@lst.de>
Suggested-by: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-02 13:06:31 -05:00
Joe Perches
7e58487b8c net: ipv4/ipv6: Remove extern from function prototypes
There are a mix of function prototypes with and without extern
in the kernel sources.  Standardize on not using extern for
function prototypes.

Function prototypes don't need to be written with extern.
extern is assumed by the compiler.  Its use is as unnecessary as
using auto to declare automatic/local variables in a block.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-19 19:12:11 -04:00
Daniel Baluta
5e73ea1a31 ipv4: fix checkpatch errors
Fix checkpatch errors of the following type:
	* ERROR: "foo * bar" should be "foo *bar"
	* ERROR: "(foo*)" should be "(foo *)"

Signed-off-by: Daniel Baluta <dbaluta@ixiacom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-15 12:37:19 -04:00
David S. Miller
b7058842c9 net: Make setsockopt() optlen be unsigned.
This provides safety against negative optlen at the type
level instead of depending upon (sometimes non-trivial)
checks against this sprinkled all over the the place, in
each and every implementation.

Based upon work done by Arjan van de Ven and feedback
from Linus Torvalds.

Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-30 16:12:20 -07:00
Eric Dumazet
645ca708f9 udp: introduce struct udp_table and multiple spinlocks
UDP sockets are hashed in a 128 slots hash table.

This hash table is protected by *one* rwlock.

This rwlock is readlocked each time an incoming UDP message is handled.

This rwlock is writelocked each time a socket must be inserted in
hash table (bind time), or deleted from this table (close time)

This is not scalable on SMP machines :

1) Even in read mode, lock() and unlock() are atomic operations and
 must dirty a contended cache line, shared by all cpus.

2) A writer might be starved if many readers are 'in flight'. This can
 happen on a machine with some NIC receiving many UDP messages. User
 process can be delayed a long time at socket creation/dismantle time.

This patch prepares RCU migration, by introducing 'struct udp_table
and struct udp_hslot', and using one spinlock per chain, to reduce
contention on central rwlock.

Introducing one spinlock per chain reduces latencies, for port
randomization on heavily loaded UDP servers. This also speedup
bindings to specific ports.

udp_lib_unhash() was uninlined, becoming to big.

Some cleanups were done to ease review of following patch
(RCUification of UDP Unicast lookups)

Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-29 01:41:45 -07:00
Brian Haley
7d06b2e053 net: change proto destroy method to return void
Change struct proto destroy function pointer to return void.  Noticed
by Al Viro.

Signed-off-by: Brian Haley <brian.haley@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-14 17:04:49 -07:00
Pavel Emelyanov
6ba5a3c52d [UDP]: Make full use of proto.h.udp_hash innovation.
After this we have only udp_lib_get_port to get the port and two 
stubs for ipv4 and ipv6. No difference in udp and udplite except
for initialized h.udp_hash member.

I tried to find a graceful way to drop the only difference between
udp_v4_get_port and udp_v6_get_port (i.e. the rcv_saddr comparison 
routine), but adding one more callback on the struct proto didn't 
appear such :( Maybe later.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-22 16:51:21 -07:00
Stephen Hemminger
32c1da7081 [UDP]: Randomize port selection.
This patch causes UDP port allocation to be randomized like TCP.
The earlier code would always choose same port (ie first empty list).

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:48:31 -07:00
David S. Miller
df2bc459a3 [UDP]: Revert 2-pass hashing changes.
This reverts changesets:

6aaf47fa48
b7b5f487ab
de34ed91c4
fc038410b4

There are still some correctness issues recently
discovered which do not have a known fix that doesn't
involve doing a full hash table scan on port bind.

So revert for now.

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-06-07 13:40:50 -07:00
David S. Miller
fc038410b4 [UDP]: Fix AF-specific references in AF-agnostic code.
__udp_lib_port_inuse() cannot make direct references to
inet_sk(sk)->rcv_saddr as that is ipv4 specific state and
this code is used by ipv6 too.

Use an operations vector to solve this, and this also paves
the way for ipv6 support for non-wild saddr hashing in UDP.

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-10 23:47:22 -07:00
YOSHIFUJI Hideaki
e905a9edab [NET] IPV4: Fix whitespace errors.
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-10 23:19:39 -08:00
Gerrit Renker
ba4e58eca8 [NET]: Supporting UDP-Lite (RFC 3828) in Linux
This is a revision of the previously submitted patch, which alters
the way files are organized and compiled in the following manner:

	* UDP and UDP-Lite now use separate object files
	* source file dependencies resolved via header files
	  net/ipv{4,6}/udp_impl.h
	* order of inclusion files in udp.c/udplite.c adapted
	  accordingly

[NET/IPv4]: Support for the UDP-Lite protocol (RFC 3828)

This patch adds support for UDP-Lite to the IPv4 stack, provided as an
extension to the existing UDPv4 code:
        * generic routines are all located in net/ipv4/udp.c
        * UDP-Lite specific routines are in net/ipv4/udplite.c
        * MIB/statistics support in /proc/net/snmp and /proc/net/udplite
        * shared API with extensions for partial checksum coverage

[NET/IPv6]: Extension for UDP-Lite over IPv6

It extends the existing UDPv6 code base with support for UDP-Lite
in the same manner as per UDPv4. In particular,
        * UDPv6 generic and shared code is in net/ipv6/udp.c
        * UDP-Litev6 specific extensions are in net/ipv6/udplite.c
        * MIB/statistics support in /proc/net/snmp6 and /proc/net/udplite6
        * support for IPV6_ADDRFORM
        * aligned the coding style of protocol initialisation with af_inet6.c
        * made the error handling in udpv6_queue_rcv_skb consistent;
          to return `-1' on error on all error cases
        * consolidation of shared code

[NET]: UDP-Lite Documentation and basic XFRM/Netfilter support

The UDP-Lite patch further provides
        * API documentation for UDP-Lite
        * basic xfrm support
        * basic netfilter support for IPv4 and IPv6 (LOG target)

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-02 21:22:46 -08:00