Let's add readahead code for reading contiguous compact/normal summary blocks
in checkpoint, then we will gain better performance in mount procedure.
Changes from v1
o remove inappropriate 'unlikely' in npages_for_summary_flush.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Now we use inmemory pages for atomic write only and provide abort procedure,
we don't need to truncate them explicitly.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
The ckpt_valid_map and cur_valid_map are synced by seg_info_to_raw_sit.
In the case of small discards, the candidates are selected before sync,
while fitrim selects candidates after sync.
So, for small discards, we need to add candidates only just being obsoleted.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch adds two new ioctls to release inmemory pages grabbed by atomic
writes.
o f2fs_ioc_abort_volatile_write
- If transaction was failed, all the grabbed pages and data should be written.
o f2fs_ioc_release_volatile_write
- This is to enhance the performance of PERSIST mode in sqlite.
In order to avoid huge memory consumption which causes OOM, this patch changes
volatile writes to use normal dirty pages, instead blocked flushing to the disk
as long as system does not suffer from memory pressure.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
We don't need to force to write dirty_exceeded for f2fs_balance_fs_bg.
This flag was only meaningful to write bypassing conditions.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
To improve recovery speed, f2fs try to readahead many contiguous blocks in warm
node segment, but for most time, abnormal power-off do not occur frequently, so
when mount a normal power-off f2fs image, by contrary ra so many blocks and then
invalid them will hurt the performance of mount.
It's better to just ra the first next-block for normal condition.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch does cleanup work, it introduces is_valid_blkaddr() to include
verification code for blkaddr with upper and down boundary value which were in
ra_meta_pages previous.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
1.We use zero as upper boundary value for ra SSA/CP blocks, we will skip
readahead as verification failure with max number, it causes low performance.
2.Low boundary value is not accurate for SSA/CP/POR region verification, so
these values need to be redefined.
This patch fixes above issues.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
As inline_{dir,inode} stat is increased/decreased concurrently by multi threads,
so the value is not so accurate, let's use atomic type for counting accurately.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Added some commentaries for code readability and cleaned up if-statement
clearly.
Signed-off-by: Changman Lee <cm224.lee@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If inode state is dirty, go straight to write.
Suggested-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Changman Lee <cm224.lee@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
The inmemory pages should be handled by invalidate_page since it needs to be
released int the truncation path.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In do_read_inode, if we failed __recover_inline_status, the inode has inline
flag without increasing its count.
Later, f2fs_evict_inode will decrease the count, which causes -1.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch revists retrial paths in f2fs.
The basic idea is to use cond_resched instead of retrying from the very early
stage.
Suggested-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch tries to fix:
BUG: using smp_processor_id() in preemptible [00000000] code: f2fs_gc-254:0/384
(radix_tree_node_alloc+0x14/0x74) from [<c033d8a0>] (radix_tree_insert+0x110/0x200)
(radix_tree_insert+0x110/0x200) from [<c02e8264>] (gc_data_segment+0x340/0x52c)
(gc_data_segment+0x340/0x52c) from [<c02e8658>] (f2fs_gc+0x208/0x400)
(f2fs_gc+0x208/0x400) from [<c02e8a98>] (gc_thread_func+0x248/0x28c)
(gc_thread_func+0x248/0x28c) from [<c0139944>] (kthread+0xa0/0xac)
(kthread+0xa0/0xac) from [<c0105ef8>] (ret_from_fork+0x14/0x3c)
The reason is that f2fs calls radix_tree_insert under enabled preemption.
So, before calling it, we need to call radix_tree_preload.
Otherwise, we should use _GFP_WAIT for the radix tree, and use mutex or
semaphore to cover the radix tree operations.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Previoulsy, we used rwlock for nat_entry lock.
But, now we have a lot of complex operations in set_node_addr.
(e.g., allocating kernel memories, handling radix_trees, and so on)
So, this patches tries to change spinlock to rw_semaphore to give CPUs to other
threads.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If there are many inodes that have data blocks in victim segment,
it takes long time to find a inode in gc_inode list.
Let's use radix_tree to reduce lookup time.
Signed-off-by: Changman Lee <cm224.lee@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
We've already made fi and sbi for inode. Let's avoid duplicated work.
Signed-off-by: Changman Lee <cm224.lee@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Fix the wrong error number in error path of f2fs_write_begin.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Little cleanup to distinguish each phase easily
Signed-off-by: Changman Lee <cm224.lee@samsung.com>
[Jaegeuk Kim: modify indentation for code readability]
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If an inode has converted inline_data which was written to the disk, we should
set its inode flag for further fsync so that this inline_data can be recovered
from sudden power off.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
After flushing dirty nat entries, it has to be no more dirty nat
entries.
Signed-off-by: Changman Lee <cm224.lee@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
It's meaningless to check dirty_nat_cnt after re-dirtying nat entries in
journal. And although there are rooms for dirty nat entires if dirty_nat_cnt
is zero, it's also meaningless to check __has_cursum_space.
Signed-off-by: Changman Lee <cm224.lee@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
A deadlock can be occurred:
Thread 1] Thread 2]
- f2fs_write_data_pages - f2fs_write_begin
- lock_page(page #0)
- grab_cache_page(page #X)
- get_node_page(inode_page)
- grab_cache_page(page #0)
: to convert inline_data
- f2fs_write_data_page
- f2fs_write_inline_data
- get_node_page(inode_page)
In this case, trying to lock inode_page and page #0 causes deadlock.
In order to avoid this, this patch adds a rule for this locking policy,
which is that page #0 should be locked followed by inode_page lock.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Two jump labels were adjusted in the implementation of the
create_node_manager_caches() function because these identifiers
contained typos.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In f2fs_evict_inode,
commit_inmemory_pages
f2fs_gc
f2fs_iget
iget_locked
-> wait for inode free
Here, if the inode is same as the one to be evicted, f2fs should wait forever.
Actually, we should not call f2fs_balance_fs during f2fs_evict_inode to avoid
this.
But, the commit_inmem_pages calls f2fs_balance_fs by default, even if
f2fs_evict_inode wants to free inmemory pages only.
Hence, this patch adds to trigger f2fs_balance_fs only when there is something
to write.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
It used nat_entry_set when create slab for sit_entry_set.
Signed-off-by: Changman Lee <cm224.lee@samsung.com>
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If a node page is request to be written during the reclaiming path, we should
submit the bio to avoid pending to recliam it.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Now in f2fs, we have three inode cache: ORPHAN_INO, APPEND_INO, UPDATE_INO,
and we manage fields related to inode cache separately in struct f2fs_sb_info
for each inode cache type.
This makes codes a bit messy, so that this patch intorduce a new struct
inode_management to wrap inner fields as following which make codes more neat.
/* for inner inode cache management */
struct inode_management {
struct radix_tree_root ino_root; /* ino entry array */
spinlock_t ino_lock; /* for ino entry lock */
struct list_head ino_list; /* inode list head */
unsigned long ino_num; /* number of entries */
};
struct f2fs_sb_info {
...
struct inode_management im[MAX_INO_ENTRY]; /* manage inode cache */
...
}
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Because we have checked the contrary condition in case of "if" judgment, we do
not need to check the condition again in case of "else" judgment. Let's remove
it.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In f2fs_remount, we will stop gc thread and set need_restart_gc as true when new
option is set without BG_GC, then if any error occurred in the following
procedure, we can restore to start the gc thread.
But after that, We will fail to restore gc thread in start_gc_thread as BG_GC is
not set in new option, so we'd better move this condition judgment out of
start_gc_thread to fix this issue.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
The locked page should be released before returning the function.
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If i_size becomes large outside of MAX_INLINE_DATA, we shoud convert the inode.
Otherwise, we can make some dirty pages during the truncation, and those pages
will be written through f2fs_write_data_page.
At that moment, the inode has still inline_data, so that it tries to write non-
zero pages into inline_data area.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
The scenario is like this.
One trhead triggers:
f2fs_write_data_pages
lock_page
f2fs_write_data_page
f2fs_lock_op <- wait
The other thread triggers:
f2fs_truncate
truncate_blocks
f2fs_lock_op
truncate_partial_data_page
lock_page <- wait for locking the page
This patch resolves this bug by relocating truncate_partial_data_page.
This function is just to truncate user data page and not related to FS
consistency as well.
And, we don't need to call truncate_inline_data. Rather than that,
f2fs_write_data_page will finally update inline_data later.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
The # of inline_data inode is decreased only when it has inline_data.
After clearing the flag, we can't decreased the number.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
It needs to write node pages if checkpoint is not doing in order to avoid
memory pressure.
Reviewed-by: Changman Lee <cm224.lee@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch adds to control the memory footprint used by ino entries.
This will conduct best effort, not strictly.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
