A few bigger things here, the main one being that there were changes to
the atmel driver in this cycle which made it possible to kill transfers
being used for filesystem I/O which turned out to be very disruptive,
the series of patches here undoes that and hardens things up further.
There's also a few smaller driver specific changes, the main one being
to revert a change that duplicted delays.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmWASuIACgkQJNaLcl1U
h9BEJQf/S3NWQvQPZ+k3YofQuvepPx7LfBDwJXcfHFqXXabjeNHZfQyftrWpik3s
KAGqRhZdQyw8Q2aMiL8/2uXPf8uihuZNoVEbMNd2IHHE2q7uIRdR92E1sf912VaO
T5yQPfVAJo6PthaSYAPGyhsPTPbvSWwgh1sMkHAdfITTKPHniQWVb9Bt1k+S0c6b
xerBN/Jg9nX5+2WgnfA9fznD8+o0H+MF9bSudmDqdCjgXr59bmJccZHm/aasU0zq
ELaqbYt2sTIpiRmvkuTWQ2dGrNdnuCQOkP3OFvzAsF4JCWUADPtFtMi1HHIkygdK
q+L/M55OvJdUsXHLAtlqMEWW7ne2ZA==
=l4ac
-----END PGP SIGNATURE-----
Merge tag 'spi-fix-v6.7-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A few bigger things here, the main one being that there were changes
to the atmel driver in this cycle which made it possible to kill
transfers being used for filesystem I/O which turned out to be very
disruptive, the series of patches here undoes that and hardens things
up further.
There's also a few smaller driver specific changes, the main one being
to revert a change that duplicted delays"
* tag 'spi-fix-v6.7-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: atmel: Fix clock issue when using devices with different polarities
spi: spi-imx: correctly configure burst length when using dma
spi: cadence: revert "Add SPI transfer delays"
spi: atmel: Prevent spi transfers from being killed
spi: atmel: Drop unused defines
spi: atmel: Do not cancel a transfer upon any signal
__bio_for_each_segment assumes that the first struct bio_vec argument
doesn't change - it calls "bio_advance_iter_single((bio), &(iter),
(bvl).bv_len)" to advance the iterator. Unfortunately, the dm-integrity
code changes the bio_vec with "bv.bv_len -= pos". When this code path
is taken, the iterator would be out of sync and dm-integrity would
report errors. This happens if the machine is out of memory and
"kmalloc" fails.
Fix this bug by making a copy of "bv" and changing the copy instead.
Fixes: 7eada909bf ("dm: add integrity target")
Cc: stable@vger.kernel.org # v4.12+
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
After commit db5e653d7c ("md: delay choosing sync action to
md_start_sync()"), md_start_sync() will hold 'reconfig_mutex', however,
in order to make sure event_work is done, __md_stop() will flush
workqueue with reconfig_mutex grabbed, hence if sync_work is still
pending, deadlock will be triggered.
Fortunately, former pacthes to fix stopping sync_thread already make sure
all sync_work is done already, hence such deadlock is not possible
anymore. However, in order not to cause confusions for people by this
implicit dependency, delay flushing event_work to dm-raid where
'reconfig_mutex' is not held, and add some comments to emphasize that
the workqueue can't be flushed with 'reconfig_mutex'.
Fixes: db5e653d7c ("md: delay choosing sync action to md_start_sync()")
Depends-on: f52f5c71f3 ("md: fix stopping sync thread")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Acked-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Jiri Olsa says:
====================
bpf: Add check for negative uprobe multi offset
hi,
adding the check for negative offset for uprobe multi link.
v2 changes:
- add more failure checks [Alan]
- move the offset retrieval/check up in the loop to be done earlier [Song]
thanks,
jirka
---
====================
Link: https://lore.kernel.org/r/20231217215538.3361991-1-jolsa@kernel.org
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
We fail to create uprobe if we pass negative offset. Add more tests
validating kernel-side error checking code.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/bpf/20231217215538.3361991-3-jolsa@kernel.org
Currently the __uprobe_register will return 0 (success) when called with
negative offset. The reason is that the call to register_for_each_vma and
then build_map_info won't return error for negative offset. They just won't
do anything - no matching vma is found so there's no registered breakpoint
for the uprobe.
I don't think we can change the behaviour of __uprobe_register and fail
for negative uprobe offset, because apps might depend on that already.
But I think we can still make the change and check for it on bpf multi
link syscall level.
Also moving the __get_user call and check for the offsets to the top of
loop, to fail early without extra __get_user calls for ref_ctr_offset
and cookie arrays.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/bpf/20231217215538.3361991-2-jolsa@kernel.org
Commit 6624e780a5 ("ice: split ice_vsi_setup into smaller
functions") has refactored a bunch of code involved in PFR. In this
process, TC queue number adjustment for XDP was lost. Bring it back.
Lack of such adjustment causes interface to go into no-carrier after a
reset, if XDP program is attached, with the following message:
ice 0000:b1:00.0: Failed to set LAN Tx queue context, error: -22
ice 0000:b1:00.0 ens801f0np0: Failed to open VSI 0x0006 on switch 0x0001
ice 0000:b1:00.0: enable VSI failed, err -22, VSI index 0, type ICE_VSI_PF
ice 0000:b1:00.0: PF VSI rebuild failed: -22
ice 0000:b1:00.0: Rebuild failed, unload and reload driver
Fixes: 6624e780a5 ("ice: split ice_vsi_setup into smaller functions")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Previously, the ice driver had support for using a handler for bonding
netdev events to ensure that conflicting features were not allowed to be
activated at the same time. While this was still in place, additional
support was added to specifically support SRIOV and LAG together. These
both utilized the netdev event handler, but the SRIOV and LAG feature was
behind a capabilities feature check to make sure the current NVM has
support.
The exclusion part of the event handler should be removed since there are
users who have custom made solutions that depend on the non-exclusion of
features.
Wrap the creation/registration and cleanup of the event handler and
associated structs in the probe flow with a feature check so that the
only systems that support the full implementation of LAG features will
initialize support. This will leave other systems unhindered with
functionality as it existed before any LAG code was added.
Fixes: bb52f42ace ("ice: Add driver support for firmware changes for LAG")
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
When there is bpf_list_head or bpf_rb_root field in map value, the free
of map btf and the free of map value may run concurrently and there may
be use-after-free problem, so add two test cases to demonstrate it. And
the use-after-free problem can been easily reproduced by using bpf_next
tree and a KASAN-enabled kernel.
The first test case tests the racing between the free of map btf and the
free of array map. It constructs the racing by releasing the array map in
the end after other ref-counter of map btf has been released. To delay
the free of array map and make it be invoked after btf_free_rcu() is
invoked, it stresses system_unbound_wq by closing multiple percpu array
maps before it closes the array map.
The second case tests the racing between the free of map btf and the
free of inner map. Beside using the similar method as the first one
does, it uses bpf_map_delete_elem() to delete the inner map and to defer
the release of inner map after one RCU grace period.
The reason for using two skeletons is to prevent the release of outer
map and inner map in map_in_map_btf.c interfering the release of bpf
map in normal_map_btf.c.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/bpf/20231216035510.4030605-1-houtao@huaweicloud.com
When creating new VSIs, they are assigned into an aggregator node in the
scheduler tree. Information about which aggregator node a VSI is assigned
into is maintained by the vsi->agg_node structure. In ice_vsi_decfg(), this
information is being destroyed, by overwriting the valid flag and the
agg_id field to zero.
For VF VSIs, this breaks the aggregator node configuration replay, which
depends on this information. This results in VFs being inserted into the
default aggregator node. The resulting configuration will have unexpected
Tx bandwidth sharing behavior.
This was broken by commit 6624e780a5 ("ice: split ice_vsi_setup into
smaller functions"), which added the block to reset the agg_node data.
The vsi->agg_node structure is not managed by the scheduler code, but is
instead a wrapper around an aggregator node ID that is tracked at the VSI
layer. Its been around for a long time, and its primary purpose was for
handling VFs. The SR-IOV VF reset flow does not make use of the standard VSI
rebuild/replay logic, and uses vsi->agg_node as part of its handling to
rebuild the aggregator node configuration.
The logic for aggregator nodes stretches back to early ice driver code from
commit b126bd6bcd ("ice: create scheduler aggregator node config and move
VSIs")
The logic in ice_vsi_decfg() which trashes the ice_agg_node data is clearly
wrong. It destroys information that is necessary for handling VF reset,. It
is also not the correct way to actually remove a VSI from an aggregator
node. For that, we need to implement logic in the scheduler code. Further,
non-VF VSIs properly replay their aggregator configuration using existing
scheduler replay logic.
To fix the VF replay logic, remove this broken aggregator node cleanup
logic. This is the simplest way to immediately fix this.
This ensures that VFs will have proper aggregate configuration after a
reset. This is especially important since VFs often perform resets as part
of their reconfiguration flows. Without fixing this, VFs will be placed in
the default aggregator node and Tx bandwidth will not be shared in the
expected and configured manner.
Fixes: 6624e780a5 ("ice: split ice_vsi_setup into smaller functions")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
There's nothing wrong with this commit, but this is dead code now
that nothing triggers a CB_GETATTR callback. It can be re-introduced
once the issues with handling conflicting GETATTRs are resolved.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
For some reason, the wait_on_bit() in nfsd4_deleg_getattr_conflict()
is waiting forever, preventing a clean server shutdown. The
requesting client might also hang waiting for a reply to the
conflicting GETATTR.
Invoking wait_on_bit() in an nfsd thread context is a hazard. The
correct fix is to replace this wait_on_bit() call site with a
mechanism that defers the conflicting GETATTR until the CB_GETATTR
completes or is known to have failed.
That will require some surgery and extended testing and it's late
in the v6.7-rc cycle, so I'm reverting now in favor of trying again
in a subsequent kernel release.
This is my fault: I should have recognized the ramifications of
calling wait_on_bit() in here before accepting this patch.
Thanks to Dai Ngo <dai.ngo@oracle.com> for diagnosing the issue.
Reported-by: Wolfgang Walter <linux-nfs@stwm.de>
Closes: https://lore.kernel.org/linux-nfs/e3d43ecdad554fbdcaa7181833834f78@stwm.de/
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
The Laptop 13 (AMD Ryzen 7040Series) BIOS 03.03 has a workaround
included in the EC firmware that will cause the EC to emit a "spurious"
keypress during the resume from s0i3 [1].
This series of keypress events can be observed in the kernel log on
resume.
```
atkbd serio0: Unknown key pressed (translated set 2, code 0x6b on isa0060/serio0).
atkbd serio0: Use 'setkeycodes 6b <keycode>' to make it known.
atkbd serio0: Unknown key released (translated set 2, code 0x6b on isa0060/serio0).
atkbd serio0: Use 'setkeycodes 6b <keycode>' to make it known.
```
In some user flows this is harmless, but if a user has specifically
suspended the laptop and then closed the lid it will cause the laptop
to wakeup. The laptop wakes up because the ACPI SCI triggers when
the lid is closed and when the kernel sees that IRQ1 is "also" active.
The kernel can't distinguish from a real keyboard keypress and wakes the
system.
Add the model into the list of quirks to disable keyboard wakeup source.
This is intentionally only matching the production BIOS version in hopes
that a newer EC firmware included in a newer BIOS can avoid this behavior.
Cc: Kieran Levin <ktl@framework.net>
Link: https://github.com/FrameworkComputer/EmbeddedController/blob/lotus-zephyr/zephyr/program/lotus/azalea/src/power_sequence.c#L313 [1]
Link: https://community.frame.work/t/amd-wont-sleep-properly/41755
Link: https://community.frame.work/t/tracking-framework-amd-ryzen-7040-series-lid-wakeup-behavior-feedback/39128
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20231212045006.97581-5-mario.limonciello@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Other platforms may need to disable keyboard wakeup besides Cezanne,
so move the detection into amd_pmc_quirks_init() where it may be applied
to multiple platforms.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20231212045006.97581-4-mario.limonciello@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
amd_pmc_wa_czn_irq1() only runs on Cezanne platforms currently but
may be extended to other platforms in the future. Rename the function
and only check platform firmware version when it's called for a Cezanne
based platform.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20231212045006.97581-3-mario.limonciello@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The platform defines will be used by the quirks in the future,
so move them to the common header to allow use by both source
files.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20231212045006.97581-2-mario.limonciello@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
For input value 0, PMC stays unassigned which causes crash while trying
to access PMC for register read/write. Include LTR index 0 in pmc_index
and ltr_index calculation.
Fixes: 2bcef45292 ("platform/x86:intel/pmc: Enable debugfs multiple PMC support")
Signed-off-by: Rajvi Jingar <rajvi.jingar@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231216011650.1973941-1-rajvi.jingar@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Some ThinkPad systems ECFW use non-standard addresses for fan control
and reporting. This patch adds support for such ECFW so that it can report
the correct fan values.
Tested on Thinkpads L13 Yoga Gen 2 and X13 Yoga Gen 2.
Suggested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Signed-off-by: Vishnu Sankar <vishnuocv@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231214134702.166464-1-vishnuocv@gmail.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The func_addr used to be NULL for indirect trampolines used by struct_ops.
Now func_addr is a valid function pointer.
Hence use BPF_TRAMP_F_INDIRECT flag to detect such condition.
Fixes: 2cd3e3772e ("x86/cfi,bpf: Fix bpf_struct_ops CFI")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/bpf/20231216004549.78355-1-alexei.starovoitov@gmail.com
The KERNEL_FPR mask only contains a flag for the first eight vector
registers. However floating point registers overlay parts of the first
sixteen vector registers.
This could lead to vector register corruption if a kernel fpu context uses
any of the vector registers 8 to 15 and is interrupted or calls a
KERNEL_FPR context. If that context uses also vector registers 8 to 15,
their contents will be corrupted on return.
Luckily this is currently not a real bug, since the kernel has only one
KERNEL_FPR user with s390_adjust_jiffies() and it is only using floating
point registers 0 to 2.
Fix this by using the correct bits for KERNEL_FPR.
Fixes: 7f79695cc1 ("s390/fpu: improve kernel_fpu_[begin|end]")
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
With gcc-7 builds, an error happens with the controller button values being
defined as const. Change to a define.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202312141227.C2h1IzfI-lkp@intel.com/
Signed-off-by: Ryan McClelland <rymcclel@gmail.com>
Reviewed-by: Daniel J. Ogorchock <djogorchock@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Pedro Tammela says:
====================
net: rtnl: introduce rcu_replace_pointer_rtnl
Introduce the rcu_replace_pointer_rtnl helper to lockdep check rtnl lock
rcu replacements, alongside the already existing helpers.
Patch 2 uses the new helper in the rtnl_unregister_* functions.
Originally this change was part of the P4TC series, as it's a recurrent
pattern there, but since it has a use case in mainline we are pushing it
separately.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
With the introduction of the rcu_replace_pointer_rtnl helper,
cleanup the rtnl_unregister_* functions to use the helper instead
of open coding it.
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Introduce the rcu_replace_pointer_rtnl helper to lockdep check rtnl lock
rcu replacements, alongside the already existing helpers.
This is a quality of life helper so instead of using:
rcu_replace_pointer(rp, p, lockdep_rtnl_is_held())
.. or the open coded..
rtnl_dereference() / rcu_assign_pointer()
.. or the lazy check version ..
rcu_replace_pointer(rp, p, 1)
Use:
rcu_replace_pointer_rtnl(rp, p)
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Validate SMB message with ->check_message() before calling
->calc_smb_size().
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
because there are none, and thus prevent a lockdep splat
-----BEGIN PGP SIGNATURE-----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=s8Bq
-----END PGP SIGNATURE-----
Merge tag 'perf_urgent_for_v6.7_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fix from Borislav Petkov:
- Avoid iterating over newly created group leader event's siblings
because there are none, and thus prevent a lockdep splat
* tag 'perf_urgent_for_v6.7_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf: Fix perf_event_validate_size() lockdep splat
Matthieu Baerts says:
====================
mptcp: misc. fixes for v6.7
Here are a few fixes related to MPTCP:
Patch 1 avoids skipping some subtests of the MPTCP Join selftest by
mistake when using older versions of GCC. This fixes a patch introduced
in v6.4, backported up to v6.1.
Patch 2 fixes an inconsistent state when using MPTCP + FastOpen. A fix
for v6.2.
Patch 3 adds a description for MPTCP Kunit test modules to avoid a
warning.
Patch 4 adds an entry to the mailmap file for Geliang's email addresses.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Matthieu Baerts <matttbe@kernel.org>
Map Geliang's old mail addresses to his @linux.dev one.
Suggested-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Geliang Tang <geliang.tang@linux.dev>
Reviewed-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
W=1 builds warn on missing MODULE_DESCRIPTION, add them here in MPTCP.
Only two were missing: two modules with different KUnit tests for MPTCP.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The netlink PM can race with fastopen self-connect attempts, shutting
down the first subflow via:
MPTCP_PM_CMD_DEL_ADDR -> mptcp_nl_remove_id_zero_address ->
mptcp_pm_nl_rm_subflow_received -> mptcp_close_ssk
and transitioning such subflow to FIN_WAIT1 status before the syn-ack
packet is processed. The MPTCP code does not react to such state change,
leaving the connection in not-fallback status and the subflow handshake
uncompleted, triggering the following splat:
WARNING: CPU: 0 PID: 10630 at net/mptcp/subflow.c:1405 subflow_data_ready+0x39f/0x690 net/mptcp/subflow.c:1405
Modules linked in:
CPU: 0 PID: 10630 Comm: kworker/u4:11 Not tainted 6.6.0-syzkaller-14500-g1c41041124bd #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/09/2023
Workqueue: bat_events batadv_nc_worker
RIP: 0010:subflow_data_ready+0x39f/0x690 net/mptcp/subflow.c:1405
Code: 18 89 ee e8 e3 d2 21 f7 40 84 ed 75 1f e8 a9 d7 21 f7 44 89 fe bf 07 00 00 00 e8 0c d3 21 f7 41 83 ff 07 74 07 e8 91 d7 21 f7 <0f> 0b e8 8a d7 21 f7 48 89 df e8 d2 b2 ff ff 31 ff 89 c5 89 c6 e8
RSP: 0018:ffffc90000007448 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff888031efc700 RCX: ffffffff8a65baf4
RDX: ffff888043222140 RSI: ffffffff8a65baff RDI: 0000000000000005
RBP: 0000000000000000 R08: 0000000000000005 R09: 0000000000000007
R10: 000000000000000b R11: 0000000000000000 R12: 1ffff92000000e89
R13: ffff88807a534d80 R14: ffff888021c11a00 R15: 000000000000000b
FS: 0000000000000000(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fa19a0ffc81 CR3: 000000007a2db000 CR4: 00000000003506f0
DR0: 000000000000d8dd DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Call Trace:
<IRQ>
tcp_data_ready+0x14c/0x5b0 net/ipv4/tcp_input.c:5128
tcp_data_queue+0x19c3/0x5190 net/ipv4/tcp_input.c:5208
tcp_rcv_state_process+0x11ef/0x4e10 net/ipv4/tcp_input.c:6844
tcp_v4_do_rcv+0x369/0xa10 net/ipv4/tcp_ipv4.c:1929
tcp_v4_rcv+0x3888/0x3b30 net/ipv4/tcp_ipv4.c:2329
ip_protocol_deliver_rcu+0x9f/0x480 net/ipv4/ip_input.c:205
ip_local_deliver_finish+0x2e4/0x510 net/ipv4/ip_input.c:233
NF_HOOK include/linux/netfilter.h:314 [inline]
NF_HOOK include/linux/netfilter.h:308 [inline]
ip_local_deliver+0x1b6/0x550 net/ipv4/ip_input.c:254
dst_input include/net/dst.h:461 [inline]
ip_rcv_finish+0x1c4/0x2e0 net/ipv4/ip_input.c:449
NF_HOOK include/linux/netfilter.h:314 [inline]
NF_HOOK include/linux/netfilter.h:308 [inline]
ip_rcv+0xce/0x440 net/ipv4/ip_input.c:569
__netif_receive_skb_one_core+0x115/0x180 net/core/dev.c:5527
__netif_receive_skb+0x1f/0x1b0 net/core/dev.c:5641
process_backlog+0x101/0x6b0 net/core/dev.c:5969
__napi_poll.constprop.0+0xb4/0x540 net/core/dev.c:6531
napi_poll net/core/dev.c:6600 [inline]
net_rx_action+0x956/0xe90 net/core/dev.c:6733
__do_softirq+0x21a/0x968 kernel/softirq.c:553
do_softirq kernel/softirq.c:454 [inline]
do_softirq+0xaa/0xe0 kernel/softirq.c:441
</IRQ>
<TASK>
__local_bh_enable_ip+0xf8/0x120 kernel/softirq.c:381
spin_unlock_bh include/linux/spinlock.h:396 [inline]
batadv_nc_purge_paths+0x1ce/0x3c0 net/batman-adv/network-coding.c:471
batadv_nc_worker+0x9b1/0x10e0 net/batman-adv/network-coding.c:722
process_one_work+0x884/0x15c0 kernel/workqueue.c:2630
process_scheduled_works kernel/workqueue.c:2703 [inline]
worker_thread+0x8b9/0x1290 kernel/workqueue.c:2784
kthread+0x33c/0x440 kernel/kthread.c:388
ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:242
</TASK>
To address the issue, catch the racing subflow state change and
use it to cause the MPTCP fallback. Such fallback is also used to
cause the first subflow state propagation to the msk socket via
mptcp_set_connected(). After this change, the first subflow can
additionally propagate the TCP_FIN_WAIT1 state, so rename the
helper accordingly.
Finally, if the state propagation is delayed to the msk release
callback, the first subflow can change to a different state in between.
Cache the relevant target state in a new msk-level field and use
such value to update the msk state at release time.
Fixes: 1e777f39b4 ("mptcp: add MSG_FASTOPEN sendmsg flag support")
Cc: stable@vger.kernel.org
Reported-by: <syzbot+c53d4d3ddb327e80bc51@syzkaller.appspotmail.com>
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/458
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
MPC backups tests will skip unexpected sometimes (For example, when
compiling kernel with an older version of gcc, such as gcc-8), since
static functions like mptcp_subflow_send_ack also be listed in
/proc/kallsyms, with a 't' in front of it, not 'T' ('T' is for a global
function):
> grep "mptcp_subflow_send_ack" /proc/kallsyms
0000000000000000 T __pfx___mptcp_subflow_send_ack
0000000000000000 T __mptcp_subflow_send_ack
0000000000000000 t __pfx_mptcp_subflow_send_ack
0000000000000000 t mptcp_subflow_send_ack
In this case, mptcp_lib_kallsyms_doesnt_have "mptcp_subflow_send_ack$"
will be false, MPC backups tests will skip. This is not what we expected.
The correct logic here should be: if mptcp_subflow_send_ack is not a
global function in /proc/kallsyms, do these MPC backups tests. So a 'T'
must be added in front of mptcp_subflow_send_ack.
Fixes: 632978f0a9 ("selftests: mptcp: join: skip MPC backups tests if not supported")
Cc: stable@vger.kernel.org
Signed-off-by: Geliang Tang <geliang.tang@linux.dev>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Christian Marangi says:
====================
net: phy: add PHY package base addr + mmd APIs
This small series is required for the upcoming qca807x PHY that
will make use of PHY package mmd API and the new implementation
with read/write based on base addr.
The MMD PHY package patch currently has no use but it will be
used in the upcoming patch and it does complete what a PHY package
may require in addition to basic read/write to setup global PHY address.
(Changelog for all the revision is present in the single patch)
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Some PHY in PHY package may require to read/write MMD regs to correctly
configure the PHY package.
Add support for these additional required function in both lock and no
lock variant.
It's assumed that the entire PHY package is either C22 or C45. We use
C22 or C45 way of writing/reading to mmd regs based on the passed phydev
whether it's C22 or C45.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Restructure phy_write_mmd and phy_read_mmd to implement generic helper
for direct mdiobus access for mmd and use these helper for phydev user.
This is needed in preparation of PHY package API that requires generic
access to the mdiobus and are deatched from phydev struct but instead
access them based on PHY package base_addr and offsets.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Current API for PHY package are limited to single address to configure
global settings for the PHY package.
It was found that some PHY package (for example the qca807x, a PHY
package that is shipped with a bundle of 5 PHY) requires multiple PHY
address to configure global settings. An example scenario is a PHY that
have a dedicated PHY for PSGMII/serdes calibrarion and have a specific
PHY in the package where the global PHY mode is set and affects every
other PHY in the package.
Change the API in the following way:
- Change phy_package_join() to take the base addr of the PHY package
instead of the global PHY addr.
- Make __/phy_package_write/read() require an additional arg that
select what global PHY address to use by passing the offset from the
base addr passed on phy_package_join().
Each user of this API is updated to follow this new implementation
following a pattern where an enum is defined to declare the offset of the
addr.
We also drop the check if shared is defined as any user of the
phy_package_read/write is expected to use phy_package_join first. Misuse
of this will correctly trigger a kernel panic for NULL pointer
exception.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Switch addr type in phy_package_shared struct to u8.
The value is already checked to be non negative and to be less than
PHY_MAX_ADDR, hence u8 is better suited than using int.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
On some silicon variants the number of available CAM entries are
less. Reserving one entry for each NIX-LF for default DMAC based pkt
forwarding rules will reduce the number of available CAM entries
further. Hence add configurability via devlink to set maximum number of
NIX-LFs needed which inturn frees up some CAM entries.
Signed-off-by: Suman Ghosh <sumang@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----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=HN3b
-----END PGP SIGNATURE-----
Merge tag 'for-6.7-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fix from David Sterba:
"One more fix that verifies that the snapshot source is a root, same
check is also done in user space but should be done by the ioctl as
well"
* tag 'for-6.7-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: do not allow non subvolume root targets for snapshot
- Null pointer dereference for mult link in core
- AC timing fix in intel driver
-----BEGIN PGP SIGNATURE-----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=ast6
-----END PGP SIGNATURE-----
Merge tag 'soundwire-6.7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire
Pull soundwire fixes from Vinod Koul:
- Null pointer dereference for mult link in core
- AC timing fix in intel driver
* tag 'soundwire-6.7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: intel_ace2x: fix AC timing setting for ACE2.x
soundwire: stream: fix NULL pointer dereference for multi_link
Driver fixes for:
- SPI PDMA data fix for TI k3-psil drivers
- suspend fix, pointer check, logic for arbitration fix and channel leak
fix in fsl-edma driver
- couple of fixes in idxd driver for GRPCFG descriptions and int_handle
field handling
- single fix for stm32 driver for bitfield overflow
-----BEGIN PGP SIGNATURE-----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=afh2
-----END PGP SIGNATURE-----
Merge tag 'dmaengine-fix-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine fixes from Vinod Koul:
- SPI PDMA data fix for TI k3-psil drivers
- suspend fix, pointer check, logic for arbitration fix and channel
leak fix in fsl-edma driver
- couple of fixes in idxd driver for GRPCFG descriptions and int_handle
field handling
- single fix for stm32 driver for bitfield overflow
* tag 'dmaengine-fix-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
dmaengine: fsl-edma: fix DMA channel leak in eDMAv4
dmaengine: fsl-edma: fix wrong pointer check in fsl_edma3_attach_pd()
dmaengine: idxd: Fix incorrect descriptions for GRPCFG register
dmaengine: idxd: Protect int_handle field in hw descriptor
dmaengine: stm32-dma: avoid bitfield overflow assertion
dmaengine: fsl-edma: Add judgment on enabling round robin arbitration
dmaengine: fsl-edma: Do not suspend and resume the masked dma channel when the system is sleeping
dmaengine: ti: k3-psil-am62a: Fix SPI PDMA data
dmaengine: ti: k3-psil-am62: Fix SPI PDMA data
- Fix alloc_free_mem_region()'s scan for address space, prevent false
negative out-of-space events
- Fix sleeping lock acquisition from CXL trace event (atomic context)
- Fix put_device() like for the new CXL PMU driver
- Fix wrong pointer freed on error path
- Fixup several lockdep reports (missing lock hold) from new assertion
in cxl_num_decoders_committed() and new tests
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSbo+XnGs+rwLz9XGXfioYZHlFsZwUCZX6oZwAKCRDfioYZHlFs
ZyLRAPwLXinja3lpUab4mV6P6w87oO7qz1n4ly8vKpTTZZxaJAD/QGlqYS6YtiPo
IXA8QiHe9RX3bGKhYmzSOd2/JFjyhQc=
=2+M9
-----END PGP SIGNATURE-----
Merge tag 'cxl-fixes-6.7-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull CXL (Compute Express Link) fixes from Dan Williams:
"A collection of CXL fixes.
The touch outside of drivers/cxl/ is for a helper that allocates
physical address space. Device hotplug tests showed that the driver
failed to utilize (skipped over) valid capacity when allocating a new
memory region. Outside of that, new tests uncovered a small crop of
lockdep reports.
There is also some miscellaneous error path and leak fixups that are
not urgent, but useful to cleanup now.
- Fix alloc_free_mem_region()'s scan for address space, prevent false
negative out-of-space events
- Fix sleeping lock acquisition from CXL trace event (atomic context)
- Fix put_device() like for the new CXL PMU driver
- Fix wrong pointer freed on error path
- Fixup several lockdep reports (missing lock hold) from new
assertion in cxl_num_decoders_committed() and new tests"
* tag 'cxl-fixes-6.7-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
cxl/pmu: Ensure put_device on pmu devices
cxl/cdat: Free correct buffer on checksum error
cxl/hdm: Fix dpa translation locking
kernel/resource: Increment by align value in get_free_mem_region()
cxl: Add cxl_num_decoders_committed() usage to cxl_test
cxl/memdev: Hold region_rwsem during inject and clear poison ops
cxl/core: Always hold region_rwsem while reading poison lists
cxl/hdm: Fix a benign lockdep splat
properly
-----BEGIN PGP SIGNATURE-----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=sArl
-----END PGP SIGNATURE-----
Merge tag 'edac_urgent_for_v6.7_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC fix from Borislav Petkov:
- A single fix for the EDAC Versal driver to read out register fields
properly
* tag 'edac_urgent_for_v6.7_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/versal: Read num_csrows and num_chans using the correct bitfield macro
Linus Torvalds