Siddharth Vadapalli says:
====================
Add J784S4 CPSW9G NET Bindings
This series cleans up the bindings by reordering the compatibles, followed
by adding the bindings for CPSW9G instance of CPSW Ethernet Switch on TI's
J784S4 SoC.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Update bindings for TI K3 J784S4 SoC which contains 9 ports (8 external
ports) CPSW9G module and add compatible for it.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Reorder compatibles to follow alphanumeric order.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Extended performance counter stats in 'ethtool -S <interface>' output
for MANA VF to facilitate troubleshooting.
Tested-on: Ubuntu22
Signed-off-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Nikolay Aleksandrov says:
====================
bonding: properly restore flags when bond changes ether type
A bug was reported by syzbot[1] that causes a warning and a myriad of
other potential issues if a bond, that is also a slave, fails to enslave a
non-eth device. While fixing that bug I found that we have the same
issues when such enslave passes and after that the bond changes back to
ARPHRD_ETHER (again due to ether_setup). This set fixes all issues by
extracting the ether_setup() sequence in a helper which does the right
thing about bond flags when it needs to change back to ARPHRD_ETHER. It
also adds selftests for these cases.
Patch 01 adds the new bond_ether_setup helper and fixes the issues when a
bond device changes its ether type due to successful enslave. Patch 02
fixes the issues when it changes its ether type due to an unsuccessful
enslave. Note we need two patches because the bugs were introduced by
different commits. Patch 03 adds the new selftests.
Due to the comment adjustment and squash, could you please review
patch 01 again? I've kept the other acks since there were no code
changes.
v3: squash the helper patch and the first fix, adjust the comment above
it to be explicit about the bond device, no code changes
v2: new set, all patches are new due to new approach of fixing these bugs
[1] https://syzkaller.appspot.com/bug?id=391c7b1f6522182899efba27d891f1743e8eb3ef
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add new network selftests for the bonding device which exercise the ether
type changing call paths. They also test for the recent syzbot bug[1] which
causes a warning and results in wrong device flags (IFF_SLAVE missing).
The test adds three bond devices and a nlmon device, enslaves one of the
bond devices to the other and then uses the nlmon device for successful
and unsuccesful enslaves both of which change the bond ether type. Thus
we can test for both MASTER and SLAVE flags at the same time.
If the flags are properly restored we get:
TEST: Change ether type of an enslaved bond device with unsuccessful enslave [ OK ]
TEST: Change ether type of an enslaved bond device with successful enslave [ OK ]
[1] https://syzkaller.appspot.com/bug?id=391c7b1f6522182899efba27d891f1743e8eb3ef
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Acked-by: Jonathan Toppins <jtoppins@redhat.com>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add bond_ether_setup helper which is used to fix ether_setup() calls in the
bonding driver. It takes care of both IFF_MASTER and IFF_SLAVE flags, the
former is always restored and the latter only if it was set.
If the bond enslaves non-ARPHRD_ETHER device (changes its type), then
releases it and enslaves ARPHRD_ETHER device (changes back) then we
use ether_setup() to restore the bond device type but it also resets its
flags and removes IFF_MASTER and IFF_SLAVE[1]. Use the bond_ether_setup
helper to restore both after such transition.
[1] reproduce (nlmon is non-ARPHRD_ETHER):
$ ip l add nlmon0 type nlmon
$ ip l add bond2 type bond mode active-backup
$ ip l set nlmon0 master bond2
$ ip l set nlmon0 nomaster
$ ip l add bond1 type bond
(we use bond1 as ARPHRD_ETHER device to restore bond2's mode)
$ ip l set bond1 master bond2
$ ip l sh dev bond2
37: bond2: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ether be:d7:c5:40:5b:cc brd ff:ff:ff:ff:ff:ff promiscuity 0 minmtu 68 maxmtu 1500
(notice bond2's IFF_MASTER is missing)
Fixes: e36b9d16c6 ("bonding: clean muticast addresses when device changes type")
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add ngbe and txgbe ndo_change_mtu support.
Signed-off-by: Mengyuan Lou <mengyuanlou@net-swift.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yoshihiro Shimoda says:
====================
net: renesas: rswitch: Fix rx and timestamp
I got reports locally about issues on the rswitch driver.
So, fix the issues.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Since the GWCA has the TX timestamp feature, this driver
should not disable it if one of ports is opened. So, fix it.
Reported-by: Phong Hoang <phong.hoang.wz@renesas.com>
Fixes: 33f5d733b5 ("net: renesas: rswitch: Improve TX timestamp accuracy")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If the RX descriptor doesn't have any data, the output value of quote
from rswitch_rx() will be increased unexpectedily. So, fix it.
Reported-by: Volodymyr Babchuk <volodymyr_babchuk@epam.com>
Fixes: 3590918b5d ("net: ethernet: renesas: Add support for "Ethernet Switch"")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In vnet_port_probe() and vsw_port_probe(), we should
check the return value of mdesc_grab() as it may
return NULL which can caused NPD bugs.
Fixes: 5d01fa0c6b ("ldmvsw: Add ldmvsw.c driver code")
Fixes: 43fdf27470 ("[SPARC64]: Abstract out mdesc accesses for better MD update handling.")
Signed-off-by: Liang He <windhl@126.com>
Reviewed-by: Piotr Raczynski <piotr.raczynski@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The rtl8365mb was using a fixed MTU size of 1536, which was probably
inspired by the rtl8366rb's initial frame size. However, unlike that
family, the rtl8365mb family can specify the max frame size in bytes,
rather than in fixed steps.
DSA calls change_mtu for the CPU port once the max MTU value among the
ports changes. As the max frame size is defined globally, the switch
is configured only when the call affects the CPU port.
The available specifications do not directly define the max supported
frame size, but it mentions a 16k limit. This driver will use the 0x3FFF
limit as it is used in the vendor API code. However, the switch sets the
max frame size to 16368 bytes (0x3FF0) after it resets.
change_mtu uses MTU size, or ethernet payload size, while the switch
works with frame size. The frame size is calculated considering the
ethernet header (14 bytes), a possible 802.1Q tag (4 bytes), the payload
size (MTU), and the Ethernet FCS (4 bytes). The CPU tag (8 bytes) is
consumed before the switch enforces the limit.
During setup, the driver will use the default 1500-byte MTU of DSA to
set the maximum frame size. The current sum will be
VLAN_ETH_HLEN+1500+ETH_FCS_LEN, which results in 1522 bytes. Although
it is lower than the previous initial value of 1536 bytes, the driver
will increase the frame size for a larger MTU. However, if something
requires more space without increasing the MTU, such as QinQ, we would
need to add the extra length to the rtl8365mb_port_change_mtu() formula.
MTU was tested up to 2018 (with 802.1Q) as that is as far as mt7620
(where rtl8367s is stacked) can go. The register was manually
manipulated byte-by-byte to ensure the MTU to frame size conversion was
correct. For frames without 802.1Q tag, the frame size limit will be 4
bytes over the required size.
There is a jumbo register, enabled by default at 6k frame size.
However, the jumbo settings do not seem to limit nor expand the maximum
tested MTU (2018), even when jumbo is disabled. More tests are needed
with a device that can handle larger frames.
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>
That was accidentially left over when we switched to the delayed delete
worker.
Suggested-by: Matthew Auld <matthew.william.auld@gmail.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Fixes: 9bff18d134 ("drm/ttm: use per BO cleanup workers")
Reported-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Tested-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230316072647.406707-1-christian.koenig@amd.com
Alex Elder says:
====================
net: ipa: minor bug fixes
The four patches in this series fix some errors, though none of them
cause any compile or runtime problems.
The first changes the files included by "drivers/net/ipa/reg.h" to
ensure everything it requires is included with the file. It also
stops unnecessarily including another file. The prerequisites are
apparently satisfied other ways, currently.
The second adds two struct declarations to "gsi_reg.h", to ensure
they're declared before they're used later in the file. Again, it
seems these declarations are currently resolved wherever this file
is included.
The third removes register definitions that were added for IPA v5.0
that are not needed. And the last updates some validity checks for
IPA v5.0 registers. No IPA v5.0 platforms are yet supported, so the
issues resolved here were never harmful.
Versions 2 and 3 of this series change the "Fixes" tags in patches
so they supply legitimate commit hashes.
====================
Link: https://lore.kernel.org/r/20230316145136.1795469-1-elder@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A recent commit defined HW_PARAM_4 as a GSI register ID but did not
add it to gsi_reg_id_valid() to indicate it's valid (for IPA v5.0+).
Add version checks for the HW_PARAM_2 and INTER_EE IRQ GSI registers
there as well.
IPA v5.0 supports up to 8 source and destination resource groups.
Update the validity check (and the comments where the register IDs
are defined) to reflect that. Similarly update comments and
validity checks for the hash/cache-related registers.
Note that this patch fixes an omission and constrains things
further, but these don't technically represent bugs.
Fixes: f651334e1e ("net: ipa: add HW_PARAM_4 GSI register")
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A recent commit defined a few IPA registers used for IPA v5.0+.
One of those was a mistake. Although the filter and router caches
get *flushed* using a single register, they use distinct registers
(ENDP_FILTER_CACHE_CFG and ENDP_ROUTER_CACHE_CFG) for configuration.
And although there *exists* a FILT_ROUT_CACHE_CFG register, it is
not needed in upstream code. So get rid of definitions related to
FILT_ROUT_CACHE_CFG, because they are not needed.
Fixes: 8ba59716d1 ("net: ipa: define IPA v5.0+ registers")
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When gsi_reg_init() got added, its declaration was added to
"gsi_reg.h" without declaring the two struct pointer types it uses.
Add these struct declarations to "gsi_reg.h".
Fixes: 3c506add35 ("net: ipa: introduce gsi_reg_init()")
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When "reg.h" got created, it included calls to WARN() and WARN_ON().
Those macros are defined via <linux/bug.h>. In addition, it uses
is_power_of_2(), which is defined in <linux/log2.h>. Include those
files so IPA "reg.h" has access to all definitions it requires.
Meanwhile, <linux/bits.h> is included but nothing defined therein
is required directly in "reg.h", so get rid of that.
Fixes: 81772e444d ("net: ipa: start generalizing "ipa_reg"")
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Drivers will commonly perform feature setting during init, if they use
the xdp_set_features_flag() helper they'll likely run into an ASSERT_RTNL()
inside call_netdevice_notifiers_info().
Don't call the notifier until the device is actually registered.
Nothing should be tracking the device until its registered and
after its unregistration has started.
Fixes: 4d5ab0ad96 ("net/mlx5e: take into account device reconfiguration for xdp_features flag")
Link: https://lore.kernel.org/r/20230316220234.598091-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Hangbin Liu says:
====================
net/sched: fix parsing of TCA_EXT_WARN_MSG for tc action
In my previous commit 0349b8779c ("sched: add new attr TCA_EXT_WARN_MSG
to report tc extact message") I didn't notice the tc action use different
enum with filter. So we can't use TCA_EXT_WARN_MSG directly for tc action.
Let's rever the previous fix 923b2e30dc ("net/sched: act_api: move
TCA_EXT_WARN_MSG to the correct hierarchy") and add a new
TCA_ROOT_EXT_WARN_MSG for tc action specifically.
Here is the tdc test result:
1..1119
ok 1 d959 - Add cBPF action with valid bytecode
ok 2 f84a - Add cBPF action with invalid bytecode
ok 3 e939 - Add eBPF action with valid object-file
ok 4 282d - Add eBPF action with invalid object-file
ok 5 d819 - Replace cBPF bytecode and action control
ok 6 6ae3 - Delete cBPF action
ok 7 3e0d - List cBPF actions
ok 8 55ce - Flush BPF actions
ok 9 ccc3 - Add cBPF action with duplicate index
ok 10 89c7 - Add cBPF action with invalid index
[...]
ok 1115 2348 - Show TBF class
ok 1116 84a0 - Create TEQL with default setting
ok 1117 7734 - Create TEQL with multiple device
ok 1118 34a9 - Delete TEQL with valid handle
ok 1119 6289 - Show TEQL stats
====================
Link: https://lore.kernel.org/r/20230316033753.2320557-1-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In my previous commit 0349b8779c ("sched: add new attr TCA_EXT_WARN_MSG
to report tc extact message") I didn't notice the tc action use different
enum with filter. So we can't use TCA_EXT_WARN_MSG directly for tc action.
Let's add a TCA_ROOT_EXT_WARN_MSG for tc action specifically and put this
param before going to the TCA_ACT_TAB nest.
Fixes: 0349b8779c ("sched: add new attr TCA_EXT_WARN_MSG to report tc extact message")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This reverts commit 923b2e30dc.
This is not a correct fix as TCA_EXT_WARN_MSG is not a hierarchy to
TCA_ACT_TAB. I didn't notice the TC actions use different enum when adding
TCA_EXT_WARN_MSG. To fix the difference I will add a new WARN enum in
TCA_ROOT_MAX as Jamal suggested.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The blamed commit has replaced a ksz_write8() call to address
REG_PORT_5_CTRL_6 (0x56) with a ksz_set_xmii() -> ksz_pwrite8() call to
regs[P_XMII_CTRL_1], which is also defined as 0x56 for ksz8795_regs[].
The trouble is that, when compared to ksz_write8(), ksz_pwrite8() also
adjusts the register offset with the port base address. So in reality,
ksz_pwrite8(offset=0x56) accesses register 0x56 + 0x50 = 0xa6, which in
this switch appears to be unmapped, and the RGMII delay configuration on
the CPU port does nothing.
So if the switch wasn't fine with the RGMII delay configuration done
through pin strapping and relied on Linux to apply a different one in
order to pass traffic, this is now broken.
Using the offset translation logic imposed by ksz_pwrite8(), the correct
value for regs[P_XMII_CTRL_1] should have been 0x6 on ksz8795_regs[], in
order to really end up accessing register 0x56.
Static code analysis shows that, despite there being multiple other
accesses to regs[P_XMII_CTRL_1] in this driver, the only code path that
is applicable to ksz8795_regs[] and ksz8_dev_ops is ksz_set_xmii().
Therefore, the problem is isolated to RGMII delays.
In its current form, ksz8795_regs[] contains the same value for
P_XMII_CTRL_0 and for P_XMII_CTRL_1, and this raises valid suspicions
that writes made by the driver to regs[P_XMII_CTRL_0] might overwrite
writes made to regs[P_XMII_CTRL_1] or vice versa.
Again, static analysis shows that the only accesses to P_XMII_CTRL_0
from the driver are made from code paths which are not reachable with
ksz8_dev_ops. So the accesses made by ksz_set_xmii() are safe for this
switch family.
[ vladimiroltean: rewrote commit message ]
Fixes: c476bede4b ("net: dsa: microchip: ksz8795: use common xmii function")
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20230315231916.2998480-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski says:
====================
ynl: another license adjustment
Hopefully the last adjustment to the licensing of the specs.
I'm still the author so should be fine to do this.
====================
Link: https://lore.kernel.org/r/20230315230351.478320-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The (only recently documented) expectation is that all specs
are under a certain license, but we don't actually enforce it.
What's worse we then go ahead and assume the license was right,
outputting the expected license into generated files.
Fixes: 37d9df224d ("ynl: re-license uniformly under GPL-2.0 OR BSD-3-Clause")
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
I relicensed Netlink spec code to GPL-2.0 OR BSD-3-Clause but
we still put a slightly different license on the uAPI header
than the rest of the code. Use the Linux-syscall-note on all
the specs and all generated code. It's moot for kernel code,
but should not hurt. This way the licenses match everywhere.
Cc: Chuck Lever <chuck.lever@oracle.com>
Fixes: 37d9df224d ("ynl: re-license uniformly under GPL-2.0 OR BSD-3-Clause")
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
definitions are optional, commit in question breaks cli for ethtool.
Fixes: 6517a60b03 ("tools: ynl: move the enum classes to shared code")
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGhZs6bAKwk/OTgTpSD+KveBX+j4FAmQSS6oACgkQSD+KveBX
+j4fGAf/SYSJAhheU+YbxoRubR9vgAiiu0RLhTXhjh6C8xkSjwzm0GuFMfJTOTRD
v3wmhE6Igyof+CVb1EdABTHwGrpBJH+HgWuD4OXlkGjnXtAUAxWetM+kb0TcctLJ
R+tY7ju7i6MNhgjpxiFuKeuxY20wh6kYGuBykcKhcw4YgDInu3D+F91tPodCHr+B
qAPJOusaqD4kwR4ozhxo0cs71OoA3gElLqMXUOiOcqMOB70JfJGKwrI975RDiEr0
yv3eDioHWYNVqntPkkZOjTrEiv1SxytbIS8wntYw7bgpA2/LoY+TQR0x/YJahPhb
7ad3EyabnnFRqiQVPzif2h1BgZVIzA==
=K4VQ
-----END PGP SIGNATURE-----
Merge tag 'mlx5-fixes-2023-03-15' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5 fixes 2023-03-15
This series provides bug fixes to mlx5 driver.
* tag 'mlx5-fixes-2023-03-15' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5e: TC, Remove error message log print
net/mlx5e: TC, fix cloned flow attribute
net/mlx5e: TC, fix missing error code
net/sched: TC, fix raw counter initialization
net/mlx5e: Lower maximum allowed MTU in XSK to match XDP prerequisites
net/mlx5: Set BREAK_FW_WAIT flag first when removing driver
net/mlx5e: kTLS, Fix missing error unwind on unsupported cipher type
net/mlx5e: Fix cleanup null-ptr deref on encap lock
net/mlx5: E-switch, Fix missing set of split_count when forward to ovs internal port
net/mlx5: E-switch, Fix wrong usage of source port rewrite in split rules
net/mlx5: Disable eswitch before waiting for VF pages
net/mlx5: Fix setting ec_function bit in MANAGE_PAGES
net/mlx5e: Don't cache tunnel offloads capability
net/mlx5e: Fix macsec ASO context alignment
====================
Link: https://lore.kernel.org/r/20230315225847.360083-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This fixes an issue where ->hour would erroneously get zeroed out
instead of ->min because of a bad copy paste.
Found by Linux Verification Center (linuxtesting.org) with the SVACE
static analysis tool.
Fixes: f240b68822 ("qed: Add support for processing fcoe tlv request.")
Signed-off-by: Daniil Tatianin <d-tatianin@yandex-team.ru>
Link: https://lore.kernel.org/r/20230315194618.579286-1-d-tatianin@yandex-team.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
drm/i915 fixes for v6.3-rc3:
- Fix hwmon PL1 power limit enabling
- Fix audio ELD handling for DP MST
- Fix PSR io and wake line calculations
- Fix DG2 HDMI modes with 267.30 and 319.89 MHz pixel clocks
- Fix SSEU subslice out-of-bounds access
- Fix misuse of non-idle barriers as fence trackers
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87r0tq5nyn.fsf@intel.com
The `devlink -j port show` command output may not contain the "flavour"
key, an example from Ubuntu 22.10 s390x LPAR(5.19.0-37-generic), with
mlx4 driver and iproute2-5.15.0:
{"port":{"pci/0001:00:00.0/1":{"type":"eth","netdev":"ens301"},
"pci/0001:00:00.0/2":{"type":"eth","netdev":"ens301d1"},
"pci/0002:00:00.0/1":{"type":"eth","netdev":"ens317"},
"pci/0002:00:00.0/2":{"type":"eth","netdev":"ens317d1"}}}
This will cause a KeyError exception.
Create a validate_devlink_output() to check for this "flavour" from
devlink command output to avoid this KeyError exception. Also let
it handle the check for `devlink -j dev show` output in main().
Apart from this, if the test was not started because the max lanes of
the designated device is 0. The script will still return 0 and thus
causing a false-negative test result.
Use a found_max_lanes flag to determine if these tests were skipped
due to this reason and return KSFT_SKIP to make it more clear.
Link: https://bugs.launchpad.net/bugs/1937133
Fixes: f3348a82e7 ("selftests: net: Add port split test")
Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Link: https://lore.kernel.org/r/20230315165353.229590-1-po-hsu.lin@canonical.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
netdev->dev_addr is now const, we can't write to it directly.
Copy scrambled mac address octects into an array then eth_hw_addr_set().
Fixes: adeef3e321 ("net: constify netdev->dev_addr")
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Link: https://lore.kernel.org/r/20230315134117.79511-1-tsbogend@alpha.franken.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
iucv_irq_data needs to be 4 bytes larger.
These bytes are not used by the iucv module, but written by
the z/VM hypervisor in case a CPU is deconfigured.
Reported as:
BUG dma-kmalloc-64 (Not tainted): kmalloc Redzone overwritten
-----------------------------------------------------------------------------
0x0000000000400564-0x0000000000400567 @offset=1380. First byte 0x80 instead of 0xcc
Allocated in iucv_cpu_prepare+0x44/0xd0 age=167839 cpu=2 pid=1
__kmem_cache_alloc_node+0x166/0x450
kmalloc_node_trace+0x3a/0x70
iucv_cpu_prepare+0x44/0xd0
cpuhp_invoke_callback+0x156/0x2f0
cpuhp_issue_call+0xf0/0x298
__cpuhp_setup_state_cpuslocked+0x136/0x338
__cpuhp_setup_state+0xf4/0x288
iucv_init+0xf4/0x280
do_one_initcall+0x78/0x390
do_initcalls+0x11a/0x140
kernel_init_freeable+0x25e/0x2a0
kernel_init+0x2e/0x170
__ret_from_fork+0x3c/0x58
ret_from_fork+0xa/0x40
Freed in iucv_init+0x92/0x280 age=167839 cpu=2 pid=1
__kmem_cache_free+0x308/0x358
iucv_init+0x92/0x280
do_one_initcall+0x78/0x390
do_initcalls+0x11a/0x140
kernel_init_freeable+0x25e/0x2a0
kernel_init+0x2e/0x170
__ret_from_fork+0x3c/0x58
ret_from_fork+0xa/0x40
Slab 0x0000037200010000 objects=32 used=30 fp=0x0000000000400640 flags=0x1ffff00000010200(slab|head|node=0|zone=0|
Object 0x0000000000400540 @offset=1344 fp=0x0000000000000000
Redzone 0000000000400500: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................
Redzone 0000000000400510: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................
Redzone 0000000000400520: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................
Redzone 0000000000400530: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................
Object 0000000000400540: 00 01 00 03 00 00 00 00 00 00 00 00 00 00 00 00 ................
Object 0000000000400550: f3 86 81 f2 f4 82 f8 82 f0 f0 f0 f0 f0 f0 f0 f2 ................
Object 0000000000400560: 00 00 00 00 80 00 00 00 cc cc cc cc cc cc cc cc ................
Object 0000000000400570: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................
Redzone 0000000000400580: cc cc cc cc cc cc cc cc ........
Padding 00000000004005d4: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZZZZZZZZZ
Padding 00000000004005e4: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZZZZZZZZZ
Padding 00000000004005f4: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZZZZZ
CPU: 6 PID: 121030 Comm: 116-pai-crypto. Not tainted 6.3.0-20230221.rc0.git4.99b8246b2d71.300.fc37.s390x+debug #1
Hardware name: IBM 3931 A01 704 (z/VM 7.3.0)
Call Trace:
[<000000032aa034ec>] dump_stack_lvl+0xac/0x100
[<0000000329f5a6cc>] check_bytes_and_report+0x104/0x140
[<0000000329f5aa78>] check_object+0x370/0x3c0
[<0000000329f5ede6>] free_debug_processing+0x15e/0x348
[<0000000329f5f06a>] free_to_partial_list+0x9a/0x2f0
[<0000000329f5f4a4>] __slab_free+0x1e4/0x3a8
[<0000000329f61768>] __kmem_cache_free+0x308/0x358
[<000000032a91465c>] iucv_cpu_dead+0x6c/0x88
[<0000000329c2fc66>] cpuhp_invoke_callback+0x156/0x2f0
[<000000032aa062da>] _cpu_down.constprop.0+0x22a/0x5e0
[<0000000329c3243e>] cpu_device_down+0x4e/0x78
[<000000032a61dee0>] device_offline+0xc8/0x118
[<000000032a61e048>] online_store+0x60/0xe0
[<000000032a08b6b0>] kernfs_fop_write_iter+0x150/0x1e8
[<0000000329fab65c>] vfs_write+0x174/0x360
[<0000000329fab9fc>] ksys_write+0x74/0x100
[<000000032aa03a5a>] __do_syscall+0x1da/0x208
[<000000032aa177b2>] system_call+0x82/0xb0
INFO: lockdep is turned off.
FIX dma-kmalloc-64: Restoring kmalloc Redzone 0x0000000000400564-0x0000000000400567=0xcc
FIX dma-kmalloc-64: Object at 0x0000000000400540 not freed
Fixes: 2356f4cb19 ("[S390]: Rewrite of the IUCV base code, part 2")
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Link: https://lore.kernel.org/r/20230315131435.4113889-1-wintera@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The aq_xdp_run_prog() function falls back to the XDP_ABORTED action
handler (using a goto) if the operations for any of the other actions fail.
The XDP_ABORTED handler in turn calls the bpf_warn_invalid_xdp_action()
tracepoint. However, the function also jumps into the XDP_PASS helper if no
XDP program is loaded on the device, which means the XDP_ABORTED handler
can be run with a NULL program pointer. This results in a NULL pointer
deref because the tracepoint dereferences the 'prog' pointer passed to it.
This situation can happen in multiple ways:
- If a packet arrives between the removal of the program from the interface
and the static_branch_dec() in aq_xdp_setup()
- If there are multiple devices using the same driver in the system and
one of them has an XDP program loaded and the other does not.
Fix this by refactoring the aq_xdp_run_prog() function to remove the 'goto
pass' handling if there is no XDP program loaded. Instead, factor out the
skb building in a separate small helper function.
Fixes: 26efaef759 ("net: atlantic: Implement xdp data plane")
Reported-by: Freysteinn Alfredsson <Freysteinn.Alfredsson@kau.se>
Tested-by: Freysteinn Alfredsson <Freysteinn.Alfredsson@kau.se>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/20230315125539.103319-1-toke@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Packet length check needs to be located after size and align_count
calculation to prevent kernel panic in skb_pull() in case
rx_cmd_a & RX_CMD_A_RED evaluates to true.
Fixes: d8b2283189 ("net: usb: smsc75xx: Limit packet length to skb->len")
Signed-off-by: Szymon Heidrich <szymon.heidrich@gmail.com>
Link: https://lore.kernel.org/r/20230316110540.77531-1-szymon.heidrich@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit f96a3d7455 ("ipv4: Fix incorrect route flushing when source
address is deleted") started to take the table ID field in the FIB info
structure into account when determining if two structures are identical
or not. This field is initialized using the 'fc_table' field in the
route configuration structure, which is not set when adding a route via
IOCTL.
The above can result in user space being able to install two identical
routes that only differ in the table ID field of their associated FIB
info.
Fix by initializing the table ID field in the route configuration
structure in the IOCTL path.
Before the fix:
# ip route add default via 192.0.2.2
# route add default gw 192.0.2.2
# ip -4 r show default
# default via 192.0.2.2 dev dummy10
# default via 192.0.2.2 dev dummy10
After the fix:
# ip route add default via 192.0.2.2
# route add default gw 192.0.2.2
SIOCADDRT: File exists
# ip -4 r show default
default via 192.0.2.2 dev dummy10
Audited the code paths to ensure there are no other paths that do not
properly initialize the route configuration structure when installing a
route.
Fixes: 5a56a0b3a4 ("net: Don't delete routes in different VRFs")
Fixes: f96a3d7455 ("ipv4: Fix incorrect route flushing when source address is deleted")
Reported-by: gaoxingwang <gaoxingwang1@huawei.com>
Link: https://lore.kernel.org/netdev/20230314144159.2354729-1-gaoxingwang1@huawei.com/
Tested-by: gaoxingwang <gaoxingwang1@huawei.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20230315124009.4015212-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=h5yU
-----END PGP SIGNATURE-----
Merge tag 'ipsec-2023-03-15' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec
Steffen Klassert says:
====================
pull request (net): ipsec 2023-03-15
1) Fix an information leak when dumping algos and encap.
From Herbert Xu
2) Allow transport-mode states with AF_UNSPEC selector
to allow for nested transport-mode states.
From Herbert Xu.
* tag 'ipsec-2023-03-15' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec:
xfrm: Allow transport-mode states with AF_UNSPEC selector
xfrm: Zero padding when dumping algos and encap
====================
Link: https://lore.kernel.org/r/20230315105623.1396491-1-steffen.klassert@secunet.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Wolfram Sang says:
====================
net: renesas: set 'mac_managed_pm' at probe time
When suspending/resuming an interface which was not up, we saw mdiobus
related PM handling despite 'mac_managed_pm' being set for RAVB/SH_ETH.
Heiner kindly suggested the fix to set this flag at probe time, not at
init/open time. I implemented his suggestion and it works fine on these
two Renesas drivers.
====================
Link: https://lore.kernel.org/r/20230315074115.3008-1-wsa+renesas@sang-engineering.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
SH_ETH doesn't need mdiobus suspend/resume, that's why it sets
'mac_managed_pm'. However, setting it needs to be moved from init to
probe, so mdiobus PM functions will really never be called (e.g. when
the interface is not up yet during suspend/resume).
Fixes: 6a1dbfefda ("net: sh_eth: Fix PHY state warning splat during system resume")
Suggested-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
RAVB doesn't need mdiobus suspend/resume, that's why it sets
'mac_managed_pm'. However, setting it needs to be moved from init to
probe, so mdiobus PM functions will really never be called (e.g. when
the interface is not up yet during suspend/resume).
Fixes: 4924c0cdce ("net: ravb: Fix PHY state warning splat during system resume")
Suggested-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
LED core provides a helper to parse default state from firmware node.
Use it instead of custom implementation.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://lore.kernel.org/r/20230314181824.56881-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=iLy+
-----END PGP SIGNATURE-----
Merge tag '6.3-rc2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs client fixes from Steve French:
"Seven cifs/smb3 client fixes, all also for stable:
- four DFS fixes
- multichannel reconnect fix
- fix smb1 stats for cancel command
- fix for set file size error path"
* tag '6.3-rc2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: use DFS root session instead of tcon ses
cifs: return DFS root session id in DebugData
cifs: fix use-after-free bug in refresh_cache_worker()
cifs: set DFS root session in cifs_get_smb_ses()
cifs: generate signkey for the channel that's reconnecting
cifs: Fix smb2_set_path_size()
cifs: Move the in_send statistic to __smb_send_rqst()
