Commit graph

206 commits

Author SHA1 Message Date
Rafael J. Wysocki
c7fb90dfbe Merge branches 'pm-cpufreq', 'pm-cpuidle', 'pm-devfreq', 'pm-opp' and 'pm-tools'
* pm-cpufreq:
  cpufreq: speedstep-smi: enable interrupts when waiting

* pm-cpuidle:
  intel_idle: support additional Broadwell model

* pm-devfreq:
  PM / devfreq: event: testing the wrong variable

* pm-opp:
  PM / OPP / clk: Remove unnecessary OOM message

* pm-tools:
  tools/power turbostat: support additional Broadwell model
  tools/power turbostat: update parameters, documentation
  tools/power turbostat: Skip printing disabled package C-states
2015-02-13 21:39:06 +01:00
Rafael J. Wysocki
79b56ab8c3 Merge branch 'turbostat' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux into pm-tools
Pull additional turbostat updates for v3.20 from Len Brown.

* 'turbostat' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux:
  tools/power turbostat: support additional Broadwell model
  tools/power turbostat: update parameters, documentation
  tools/power turbostat: Skip printing disabled package C-states
2015-02-12 02:09:10 +01:00
Len Brown
48a0631c89 tools/power turbostat: support additional Broadwell model
Signed-off-by: Len Brown <len.brown@intel.com>
2015-02-10 15:59:53 -05:00
Rafael J. Wysocki
b5e82233ca Merge branch 'pm-tools'
* pm-tools:
  tools/power turbostat: relax dependency on APERF_MSR
  tools/power turbostat: relax dependency on invariant TSC
  tools/power turbostat: decode MSR_*_PERF_LIMIT_REASONS
  tools/power turbostat: relax dependency on root permission
  cpupower Makefile change to help run the tool without 'make install'
2015-02-10 16:11:26 +01:00
Len Brown
d8af6f5f0f tools/power turbostat: update parameters, documentation
Long format options added, though the short ones should still work.
eg. the new "--Counter 0x10" is the same as the old "-C 0x10"

Note this Incompatibility:
Old:
-v displayed verbose debug output

New:
-v and --version simpaly display version

Additional parameters:
-d and --debug display verbose debug output
-h and --help display a help message

Updated turbosat.8 man page accordingly.

Signed-off-by: Len Brown <len.brown@intel.com>
2015-02-10 01:56:38 -05:00
Len Brown
ee7e38e3d8 tools/power turbostat: Skip printing disabled package C-states
Replaced previously open-coded Package C-state Limit decoding
with table-driven decoding.  In doing so, updated to match January 2015
"Intel(R) 64 and IA-23 Architectures Software Developer's Manual".

In the past, turbostat would print package C-state residency columns
for all package states supported by the model's architecture, even though
a particular SKU may not support them, or they may be disabled by the BIOS.
Now turbostat will skip printing colunns if MSRs indicate that they are not enabled.
eg. many SKUs don't support PC7, and so that column will no longer be printed.

Signed-off-by: Len Brown <len.brown@intel.com>
2015-02-09 23:39:45 -05:00
Rafael J. Wysocki
994b7f10b0 Merge branch 'turbostat' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux into pm-tools
Pull turbostate changes for v3.20 from Len Brown.

* 'turbostat' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux:
  tools/power turbostat: relax dependency on APERF_MSR
  tools/power turbostat: relax dependency on invariant TSC
  tools/power turbostat: decode MSR_*_PERF_LIMIT_REASONS
  tools/power turbostat: relax dependency on root permission
2015-02-10 00:35:39 +01:00
Len Brown
a729617c58 tools/power turbostat: relax dependency on APERF_MSR
While turbostat is significantly less useful on systems
with no APERF_MSR, it seems more friendly
to run on such systems and report what we can,
rather than refusing to run.

Update man page to reflect recent changes.

Signed-off-by: Len Brown <len.brown@intel.com>
2015-02-09 18:28:18 -05:00
Len Brown
d789944753 tools/power turbostat: relax dependency on invariant TSC
Turbostat can be useful on systems that do not support invariant TSC,
so allow it to run on those systgems.

All arithmetic in turbostat using the TSC value is per-processsor,
so it does not depend on the TSC values being in sync acrosss processors.

Turbostat uses gettimeofday() for the measurement interval
rather than using the TSC directly, so that key metric
is also immune from variable TSC.

Turbostat prints a TSC sanity check column:

TSC_MHz = TSC_delta/interval

If this column is constant and is close to the processor
base frequency, then the TSC is behaving properly.

The other key turbostat columns are calculated this way:

Avg_Mhz = APERF_delta/interval

%Busy = MPERF_delta/TSC_delta

Bzy_MHz = TSC_delta/APERF_delta/MPERF_delta/interval

Tested on Core2 and Core2-Xeon, and so this patch includes
a few other changes to remove the assumption that target
systems are Nehalem and newer.

Signed-off-by: Len Brown <len.brown@intel.com>
2015-02-09 18:28:08 -05:00
Len Brown
3a9a941d0b tools/power turbostat: decode MSR_*_PERF_LIMIT_REASONS
The Processor generation code-named Haswell
added MSR_{CORE | GFX | RING}_PERF_LIMIT_REASONS
to explain when and how the processor limits frequency.

turbostat -v
will now decode these bits.

Each MSR has an "Active" set of bits which describe
current conditions, and a "Logged" set of bits,
which describe what has happened since last cleared.

Turbostat currently doesn't clear the log bits.

Signed-off-by: Len Brown <len.brown@intel.com>
2015-02-09 16:44:24 -05:00
Len Brown
98481e79b6 tools/power turbostat: relax dependency on root permission
For turbostat to run as non-root, it needs to permissions:

1. read access to /dev/cpu/*/msr
	via standard user/group/world file permissions

2. CAP_SYS_RAWIO
	eg.  # setcap cap_sys_rawio=ep turbostat

Yes, running as root still works.

Signed-off-by: Len Brown <len.brown@intel.com>
2015-02-09 16:41:16 -05:00
David E. Box
82a8094194 ACPICA: Update Copyright headers to 2015
ACPICA commit 8990e73ab2aa15d6a0068b860ab54feff25bee36

Link: https://github.com/acpica/acpica/commit/8990e73a
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-02-05 15:31:43 +01:00
sriram@marirs.net.in
5c1de006e8 cpupower Makefile change to help run the tool without 'make install'
The cpupower tool, when compiled against libcpupower.so fail's to run as
the linker file path's are missing during compilation. So added changes
in the Makefile to run cpupower tool, which helps us run the tool
without doing a 'make install'.

Signed-off-by: Sriram Raghunathan <sriram@marirs.net.in>
Acked-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-01-30 01:47:41 +01:00
Prarit Bhargava
a59e5109f6 tools / cpupower: Fix no idle state information return value
sysfs_get_idlestate_count() returns an unsigned int.  Returning -ENODEV
is not the right thing to do here, and in any case is handled the same
way as if there are no states found.

Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Acked-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-12-19 23:01:12 +01:00
Michal Privoznik
ad1d8313cd tools / cpupower: Correctly detect if running as root
Some operations, like frequency-set, need root privileges. However,
the way that this is detected is not correct. The getuid() is called,
while in fact geteuid() should be. This way we can allow
distributions or users to set SETUID flags on the cpupower binary if
they want to and let regular users change the cpu frequency governor.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Acked-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-12-19 23:01:03 +01:00
Prarit Bhargava
2a813f1aaa Revert "tools: cpupower: fix return checks for sysfs_get_idlestate_count()"
This reverts commit 16b7c275c0.

My previous commit 16b7c275c0 ("tools: cpupower: fix return checks for
sysfs_get_idlestate_count()") was not correct.  After looking
at the changelog for cpupower I noticed that Thomas had changed the return of
sysfs_get_idlestate_count() to an unsigned int to simplify the code.  The
problem is really that both he (in his original change) and I (in my new
change) missed the obvious that sysfs_get_idlestate_count()
can't return -ENODEV.  It should just return 0 for "no c-states".

Fixes: 16b7c275c0 (tools: cpupower: fix return checks for ...)
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-12-14 22:14:16 +01:00
Prarit Bhargava
16b7c275c0 tools: cpupower: fix return checks for sysfs_get_idlestate_count()
Red Hat and Fedora use a bug reporting tool that gathers data about
"broken" systems called sosreport.  Among other things, it includes the
output of 'cpupower idle-info'.  Executing 'cpupower idle-info' on a
system that has cpuidle disabled via 'cpuidle.off=1' results in a 300
second hang in the cpupower application.

ie)
[root@intel-brickland-05]# cpupower idle-info
Could not determine cpuidle driver

Analyzing CPU 0:
Number of idle states: -19
[hang]

The problem is that the cpupower code only checks for a zero return from
sysfs_get_idlestate_count().  The function can return -ENODEV (-19) as
above.  This patch fixes callers to sysfs_get_idlestate_count() to check
the right return values.

Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-12-05 03:12:34 +01:00
Bob Moore
63c9043b90 ACPICA: acpiexec: Do not put STDIN into raw mode unless it is a terminal.
Eliminate an error message for batch-mode processing on unix
systems. ACPICA BZ 1114.

This patch is mainly for fixing the issues of acpiexec which is not in the
Linux upstream.

Link: https://bugs.acpica.org/show_bug.cgi?id=1114
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-10-21 00:39:40 +02:00
Lv Zheng
f1b697525d ACPICA: acpidump: Add ACPI 1.0 RSDP support.
The acpidump currently always uses ACPI 2.0 format to dump RSDP, this patch
adds ACPI 1.0 RSDP support.

Link: https://bugs.acpica.org/show_bug.cgi?id=1097
Link: https://bugs.acpica.org/show_bug.cgi?id=1103
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Reported-and-tested-by: Rudolf Marek <r.marek@assembler.cz>
Reported-and-tested-by: Rafal <fatwildcat@gmail.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-10-21 00:39:39 +02:00
Linus Torvalds
49899007b9 Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux
Pull idle update from Len Brown:
 "Two Intel-platform-specific updates to intel_idle, and a cosmetic
  tweak to the turbostat utility"

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux:
  tools/power turbostat: tweak whitespace in output format
  intel_idle: Broadwell support
  intel_idle: Disable Baytrail Core and Module C6 auto-demotion
2014-08-16 09:25:34 -06:00
Len Brown
e7c95ff32d tools/power turbostat: tweak whitespace in output format
turbostat -S
output was off by 1 space before this patch.

Signed-off-by: Len Brown <len.brown@intel.com>
2014-08-15 17:34:44 -04:00
Rafael J. Wysocki
49c68fd448 Merge branch 'pm-tools'
* pm-tools:
  cpupower: Remove redundant error check
  cpupower: bench: parse.c: Fix several minor errors
  cpupower: mperf monitor: Correct use of ! and &
  cpupower: Adjust MAINTAINERS file
  PM / tools: cpupower: drop negativity check on unsigned value
2014-08-05 22:50:00 +02:00
Peter Senna Tschudin
059802f961 cpupower: Remove redundant error check
Remove double checks, and move the call to print_error to the
first check. Replace break by return, and return 0 on success.
The simplified version of the coccinelle semantic patch that
fixes this issue is as follows:

// <smpl>
@@
expression E; identifier pr; expression list es;
@@
for(...;...;...){
...
-	if (E) break;
+	if (E){
+		pr(es);
+		break;
+	}
...
}
- if(E) pr(es);
// </smpl>

Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com>
Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-07-30 01:57:13 +02:00
Rickard Strandqvist
13f6de52b1 cpupower: bench: parse.c: Fix several minor errors
Resolved several minor errors in prepare_config() and made some additional improvements.
Earlier, the risk of file stream that was not closed. Misuse of strncpy, and the use of strncmp with strlen that makes it pointless.
I also check that sscanf has been successful, otherwise continue to the next line. And minimized the use of magic numbers.

This was found using a static code analysis program called cppcheck.

Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-07-30 01:57:13 +02:00
Himangi Saraogi
97fa1c5ca6 cpupower: mperf monitor: Correct use of ! and &
In commit ae91d60ba8, a bug was fixed that
involved converting !x & y to !(x & y).  The code below shows the same
pattern, and thus should perhaps be fixed in the same way.

The Coccinelle semantic patch that makes this change is as follows:

// <smpl>
@@ expression E1,E2; @@
(
  !E1 & !E2
|
- !E1 & E2
+ !(E1 & E2)
)
// </smpl>

Signed-off-by: Himangi Saraogi <himangi774@gmail.com>
Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-07-30 01:57:12 +02:00
Andrey Utkin
788606cb88 PM / tools: cpupower: drop negativity check on unsigned value
Link: https://bugzilla.kernel.org/show_bug.cgi?id=80621
Reported-by: David Binderman <dcb314@hotmail.com>
Signed-off-by: Andrey Utkin <andrey.krieger.utkin@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-07-19 21:41:17 +02:00
Bob Moore
ff2389fe66 ACPICA: utprint/oslibcfs: cleanup - no functional change
Some cleanup and comment update.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-07-08 14:22:27 +02:00
Lv Zheng
4d2c8223f5 ACPICA: OSL: Update acpidump to reduce source code differences
This patch is a result of an ACPICA commit to enables acpidump for EFI. For
Linux kernel, this patch is a no-op. It is only required by the ACPICA
release process to reduce the source code differences between the Linux
kernel and the ACPICA upstream. Lv Zheng.

Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-07-08 14:22:27 +02:00
Lv Zheng
846d6ef4d7 ACPICA: acpidump: Reduce freopen() invocations to improve portability
This patch reduces the requirement of invoking freopen() in acpidump in order
to reduce the porting effort of acpidump.

This patch achieves this by turning all acpi_os_printf(stdout) into
acpi_ut_file_printf(gbl_output_file). Lv Zheng.

Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-07-08 14:22:27 +02:00
Lv Zheng
dcaff16df2 ACPICA: acpidump: Replace file IOs with new APIs to improve portability
The new APIs are enabled to offer a portable layer to access files:
 1. acpi_os_XXX_file_XXX: Wrapper of fopen/fclose/fread/fwrite
 2. acpi_os_printf: Wrapper of printf
 3. acpi_log_error: Wrapper of fprintf(stderr)

This patch deploys such mechanisms to acpidump to improve the portability
of this tool. Lv Zheng.

Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-07-08 14:22:27 +02:00
Lv Zheng
135610f792 ACPICA: acpidump: Remove exit() from generic layer to improve portability
This patch removes exit() from generic acpidump code to improve the
portability of this tool. Lv Zheng.

Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-07-08 14:22:27 +02:00
Lv Zheng
fbee6b21a3 ACPICA: acpidump: Add memory/string OSL usage to improve portability
This patch adds code to use generic OSL for acpidump to improve the
portability of this tool. Lv Zheng.

Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-07-08 14:22:27 +02:00
Lv Zheng
a92e95773d ACPICA: Common: Enhance acpi_getopt() to improve portability
This patch enhances acpi_getopt() by converting the standard C library
invocations into portable ACPI string APIs and acpi_log_error() to improve
portability. Lv Zheng.

Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-07-08 14:22:26 +02:00
Lv Zheng
3c9349c937 ACPICA: Common: Enhance cm_get_file_size() to improve portability
This patch uses abstract file IO and acpi_log_error() APIs to enhance
cm_get_file_size() so that applications that invoke this API could have
portability improved.

With actual references added to abstract file IO and acpi_log_error(), the
applications need to link oslibcfs.o, utdebug.o, utexcep.o, utmath.o,
utprint.o and utxferror.o.

It is also required to add acpi_os_initialize() invocations if an
application starts to use acpi_log_error().

acpidump has already invoked acpi_os_initialize() in this way.  Lv Zheng.

Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-07-08 14:22:26 +02:00
Lv Zheng
d9cf147dbd ACPICA: Application: Enhance ACPI_USAGE_xxx/ACPI_OPTION with acpi_os_printf() to improve portability
This patch enhances ACPI_USAGE_xxx/ACPI_OPTION macros to use portable
acpi_os_printf() so that usage functions for applications no longer rely on
the printf() API.

To use acpi_os_printf() exported by osunixxf.c as a replacement of
printf(), applications need to initialize acpi_gbl_output_file to stdout
and initialize acpi_gbl_db_output_flags to ACPI_DB_CONSOLE_OUTPUT. The
latter is automatically done by ACPI_INIT_GLOBAL(), applications need to
link utglobal.o to utilize this mechanism. For GCC, assigning stdout to
acpi_gbl_output_file using ACPI_INIT_GLOBAL() is not possible as stdout is
not a constant in GCC environment. As an alternative solution, stdout
assignment has been put into acpi_os_initialize(). Thus
acpi_os_initialize() need to be invoked very early by the applications to
initialize the default output of acpi_os_printf() to keep behavior
consistency.

acpidump has already invoked acpi_os_initialize() in this way. Lv Zheng.

Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-07-08 14:22:26 +02:00
Lv Zheng
80a648c12e ACPICA: Utilities: Add formatted printing APIs
This patch introduces formatted printing APIs to handle ACPICA specific
formatted print requirements. Currently only specific OSPMs will use this
customized printing support, Linux kernel doesn't use these APIs at this
time. It will be enabled for Linux kernel resident ACPICA after being well
tested. So currently this patch is a no-op.

The specific formatted printing APIs are useful to ACPICA as:
 1. Some portable applications do not link standard C library, so they
    cannot use standard formatted print APIs directly.
 2. Platform specific printing format may differ and thus not portable, for
    example, u64 is %ull for Linux kernel and is %uI64 for some MSVC
    versions.
 3. Platform specific printing format may conflict with ACPICA's usages
    while it is not possible for ACPICA developers to test their code for
    all platforms. For example, developers may generate %pRxxx while Linux
    kernel treats %pR as structured resource printing and decodes variable
    argument as a "struct resource" pointer.
This patch solves above issues by introducing the new APIs.

Note that users of such APIs are not introduced in this patch. Users of
acpi_os_file_vprintf()/acpi_ut_file_printf() need to invoke acpi_os_initialize(),
this should be taken care by the further patches where such users are
introduced. Lv Zheng.

Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-07-08 14:22:25 +02:00
Lv Zheng
7824f44ecf ACPICA: OSL: Add portable file IO to improve portability
This patch adds portable file IO to generic OSL to improve the portability
of the applications.

A portable application may use different file IO interfaces than the
standard C library ones. This patch thus introduces an abstract file IO
layer into the generic OSL.

Note that this patch does not introduce users of such interfaces, further
patches should introduce users one by one carefully with build tests
performed. Lv Zheng.

Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-07-08 14:22:25 +02:00
Lv Zheng
83b80bace4 ACPICA: OSL: Clean up acpi_os_printf()/acpi_os_vprintf() stubs
This patch is mainly for acpidump where there are redundant
acpi_os_printf()/acpi_os_vprintf() stubs implemented. This patch cleans up such
specific implementation by linking acpidump to osunixxf.c/oswinxf.c.

To make acpi_os_printf() exported by osunixxf.c/oswinxf.c to behave as the
old acpidump specific ones, applications need to:
 1. Initialize acpi_gbl_db_output_flags to ACPI_DB_CONSOLE_OUTPUT.
    This is automatically done by ACPI_INIT_GLOBAL(), applications need to
    link utglobal.o to utilize this mechanism.
 2. Initialize acpi_gbl_output_file to stdout.
    For GCC, assigning stdout to acpi_gbl_output_file using ACPI_INIT_GLOBAL()
    is not possible as stdout is not a constant in GCC environment. As an
    alternative solution, stdout assignment is put into acpi_os_initialize().
    Thus acpi_os_initialize() need to be invoked very early by the
    applications to initialize the default output of acpi_os_printf().

This patch also releases osunixxf.c to the Linux kernel. Lv Zheng.

Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-07-08 14:22:25 +02:00
Lv Zheng
e8c038a3c6 ACPICA: Utilities: Cleanup DEFINE_ACPI_GLOBALS by moving acpi_ut_init_global() from utglobal.c to utinit.c
The utglobal.c is used to define and initialize global variables.  It makes
sense if just adding utglobal.o to applications that are using such
variables. But acpi_ut_init_globals() is preventing us from doing so as
this initialization function references other components' initializations
code, which leads to the requirement that many files should also get linked
if one wants to link utglobal.o.

It is possible to just move acpi_ut_init_global() to utinit.c for
applications that require this function to link.

By linking utglobal.o, we can stop defining DEFINE_ACPI_GLOBALS for
applications (currently only acpidump is affected). Lv Zheng.

Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-07-08 14:22:25 +02:00
Lv Zheng
890fbfa051 ACPICA: acpidump: Add support for ACPI 1.0 GUID in Linux
For older EFI platforms, searches for the RSDP using ACPI 1.0 GUID if the
2.0 GUID search fails.

Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-07-08 14:22:24 +02:00
Rafael J. Wysocki
2e30baad22 Merge branches 'acpi-tools' and 'pm-tools'
* acpi-tools:
  ACPI / tools: Introduce ec_access.c - tool to access the EC

* pm-tools:
  cpupower: Remove mc and smt power aware scheduler info/settings
  cpupower: cpupower info -b should return 0 on success, not the perf bias value
  cpupower: If root, try to load msr driver on x86 if /dev/cpu/0/msr is not available
  cpupower: Install recently added cpupower-idle-{set, info} manpages
  cpupower: Introduce idle state disable-by-latency and enable-all
  cpupower: Remove all manpages on make uninstall
  cpupower: Remove dead link to homepage, and update the targets built.
  cpupower: Rename cpufrequtils -> cpupower, and libcpufreq -> libcpupower.
  PM / tools: cpupower: add option to display values without round offs
  tools / power: turbostat: Drop temperature checks
2014-06-03 23:13:34 +02:00
Rafael J. Wysocki
057beb1de5 Merge branch 'pm-cpufreq'
* pm-cpufreq: (28 commits)
  cpufreq: handle calls to ->target_index() in separate routine
  cpufreq: s5pv210: drop check for CONFIG_PM_VERBOSE
  cpufreq: intel_pstate: Remove unused member name of cpudata
  cpufreq: Break out early when frequency equals target_freq
  cpufreq: Tegra: drop wrapper around tegra_update_cpu_speed()
  cpufreq: imx6q: Remove unused include
  cpufreq: imx6q: Drop devm_clk/regulator_get usage
  cpufreq: powernow-k8: Suppress checkpatch warnings
  cpufreq: powernv: make local function static
  cpufreq: Enable big.LITTLE cpufreq driver on arm64
  cpufreq: nforce2: remove DEFINE_PCI_DEVICE_TABLE macro
  intel_pstate: Add CPU IDs for Broadwell processors
  cpufreq: Fix build error on some platforms that use cpufreq_for_each_*
  PM / OPP: Move cpufreq specific OPP functions out of generic OPP library
  PM / OPP: Remove cpufreq wrapper dependency on internal data organization
  cpufreq: Catch double invocations of cpufreq_freq_transition_begin/end
  intel_pstate: Remove sample parameter in intel_pstate_calc_busy
  cpufreq: Kconfig: Fix spelling errors
  cpufreq: Make linux-pm@vger.kernel.org official mailing list
  cpufreq: exynos: Use dev_err/info function instead of pr_err/info
  ...
2014-06-03 23:13:20 +02:00
Lv Zheng
2947c1d5f7 ACPICA: acpidump: Fix repetitive table dump in -n mode.
In "-n" mode, reserved tables (RSDP/RSDT/XSDT/DSDT/FACS) are dumped
multiple times due a missing instance check in osl_get_bios_table().
This patch fixes this issue.

Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-05-29 01:25:42 +02:00
Thomas Renninger
7ea1bdb8e1 cpupower: Remove mc and smt power aware scheduler info/settings
These kernel interfaces got removed by:

commit 8e7fbcbc22
Author: Peter Zijlstra <peterz@infradead.org>
Date:   Mon Jan 9 11:28:35 2012 +0100

    sched: Remove stale power aware scheduling remnants and dysfunctional knobs

No need to further keep them as userspace configurations.

Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-05-17 00:36:37 +02:00
Thomas Renninger
3fc5a0e51a cpupower: cpupower info -b should return 0 on success, not the perf bias value
Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-05-17 00:36:37 +02:00
Thomas Renninger
8a19cb5867 cpupower: If root, try to load msr driver on x86 if /dev/cpu/0/msr is not available
Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-05-17 00:36:36 +02:00
Thomas Renninger
84baab9177 cpupower: Install recently added cpupower-idle-{set, info} manpages
Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-05-17 00:36:36 +02:00
Thomas Renninger
69cd502dd8 cpupower: Introduce idle state disable-by-latency and enable-all
Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-05-17 00:36:36 +02:00
Ramkumar Ramachandra
706f4c1100 cpupower: Remove all manpages on make uninstall
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-05-17 00:36:36 +02:00
Ramkumar Ramachandra
db262ea415 cpupower: Remove dead link to homepage, and update the targets built.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-05-17 00:36:36 +02:00