drm-misc-next for v6.7-rc1:
drm-misc-next-2023-10-19 + following:
UAPI Changes:
Cross-subsystem Changes:
- Convert fbdev drivers to use fbdev i/o mem helpers.
Core Changes:
- Use cross-references for macros in docs.
- Make drm_client_buffer_addb use addfb2.
- Add NV20 and NV30 YUV formats.
- Documentation updates for create_dumb ioctl.
- CI fixes.
- Allow variable number of run-queues in scheduler.
Driver Changes:
- Rename drm/ast constants.
- Make ili9882t its own driver.
- Assorted fixes in ivpu, vc4, bridge/synopsis, amdgpu.
- Add planar formats to rockchip.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3d92fae8-9b1b-4165-9ca8-5fda11ee146b@linux.intel.com
Rather than doing this in the IP code for the SDMA paging
engine, move it up to the core device level init level.
This should fix the scheduler init ordering.
v2: drop extra parens
v3: drop SDMA helpers
v4: Added a Fixes tag because amdgpu dereferences an uninitialized
scheduler without this patch, and this patch fixes this. (Luben)
Tested-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20231025171928.3318505-1-alexander.deucher@amd.com
Acked-by: Christian König <christian.koenig@amd.com>
Fixes: 56e449603f ("drm/sched: Convert the GPU scheduler to variable number of run-queues")
Signed-off-by: Luben Tuikov <ltuikov89@gmail.com>
It's not enabled in hardware so the code is dead.
Remove it.
Reviewed-by: Jack Xiao <Jack.Xiao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As part of IP discovery early_init is run for all HW IP blocks.
During this phase all firmware is supposed to be identified that may
be missing so that the driver can avoid releasing resources used by
the EFI framebuffer or simpledrm until the last possible moment.
Move microcode loading from sw_init to early_init.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The error path for SDMA firmware loading is unnecessarily noisy.
When a firmware is missing 3 errors show up:
```
amdgpu 0000:07:00.0: Direct firmware load for amdgpu/green_sardine_sdma.bin failed with error -2
[drm:sdma_v4_0_early_init [amdgpu]] *ERROR* Failed to load sdma firmware!
[drm:amdgpu_device_init [amdgpu]] *ERROR* early_init of IP block <sdma_v4_0> failed -19
```
The error code for the device init is bubbled up already, remove the
second one.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use an inline function for version check. Gives more flexibility to
handle any format changes.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/sdma_v6_0.c:248: warning: Function parameter or member 'job' not described in 'sdma_v6_0_ring_emit_ib'
drivers/gpu/drm/amd/amdgpu/sdma_v6_0.c:248: warning: Function parameter or member 'flags' not described in 'sdma_v6_0_ring_emit_ib'
drivers/gpu/drm/amd/amdgpu/sdma_v6_0.c:945: warning: Function parameter or member 'timeout' not described in 'sdma_v6_0_ring_test_ib'
drivers/gpu/drm/amd/amdgpu/sdma_v6_0.c:1124: warning: Function parameter or member 'ring' not described in 'sdma_v6_0_ring_pad_ib'
drivers/gpu/drm/amd/amdgpu/sdma_v6_0.c:1175: warning: Function parameter or member 'vmid' not described in 'sdma_v6_0_ring_emit_vm_flush'
drivers/gpu/drm/amd/amdgpu/sdma_v6_0.c:1175: warning: Function parameter or member 'pd_addr' not described in 'sdma_v6_0_ring_emit_vm_flush'
Cc: linaro-mm-sig@lists.linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix this warning by adding 'ring' arguments to kdoc.
gcc with W=1
drivers/gpu/drm/amd/amdgpu/sdma_v6_0.c:1128: warning: Function parameter or member 'ring' not described in 'sdma_v6_0_ring_pad_ib'
Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Address a bunch of kdoc warnings:
gcc with W=1
drivers/gpu/drm/amd/amdgpu/sdma_v6_0.c:248: warning: Function parameter or member 'job' not described in 'sdma_v6_0_ring_emit_ib'
drivers/gpu/drm/amd/amdgpu/sdma_v6_0.c:248: warning: Function parameter or member 'flags' not described in 'sdma_v6_0_ring_emit_ib'
drivers/gpu/drm/amd/amdgpu/sdma_v6_0.c:946: warning: Function parameter or member 'timeout' not described in 'sdma_v6_0_ring_test_ib'
drivers/gpu/drm/amd/amdgpu/sdma_v6_0.c:1125: warning: Function parameter or member 'ring' not described in 'sdma_v6_0_ring_pad_ib'
drivers/gpu/drm/amd/amdgpu/sdma_v6_0.c:1176: warning: Function parameter or member 'vmid' not described in 'sdma_v6_0_ring_emit_vm_flush'
drivers/gpu/drm/amd/amdgpu/sdma_v6_0.c:1176: warning: Function parameter or member 'pd_addr' not described in 'sdma_v6_0_ring_emit_vm_flush'
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
sched.ready is nothing with ring initialization, it needs to set
to be true after ring/IB test in amdgpu_ring_test_helper to tell
the ring is ready for submission.
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v1: Each partition has its own gfxhub or mmhub. adjust
the num of MAX_VMHUBS and the GFXHUB/MMHUB layout (Le)
v2: re-design the AMDGPU_GFXHUB/AMDGPU_MMHUB layout (Le)
v3: apply the gfxhub/mmhub layout to new IPs (Hawking)
v4: fix up gmc11 (Alex)
v5: rebase (Alex)
Signed-off-by: Le Ma <le.ma@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
This WPTR_POLL_ENABLE is a hardware contigious polling which will cause
FCLK and UCLK to keep on a high level.
Mostly its case can be covered by F32_WPTR_POLL_ENABLE which polls by
firmware.
So to save power, SR-IOV also needs to disable this bit
Signed-off-by: Horace Chen <horace.chen@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It looks better to place this field in ring
structure. Also drop the repeated ring funcs definitions
if there's no difference except for vmhub field.
v2: rename the field to vm_hub like others (Le)
v3: apply the changes to new ip blocks (Hawking)
v4: fix vcn sw ring (Alex)
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable SDMA queue empty context switching. SDMA context switch due to
quantum programming no longer done here (as of sdma v6), so re-name
sdma_v6_0_ctx_switch_enable to sdma_v6_0_ctxempty_int_enable to reflect
this.
Also program SDMAx_QUEUEx_SCHEDULE_CNTL for context switch due to
quantum in KFD. Set to amdgpu_sdma_phase_quantum (defaults to 32 i.e.
3200us).
Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Reviewed-by: Stanley Yang <Stanley.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This achieves the same result as the sequence used in emit_flush_gpu_tlb
but the invalidation is now a single packet instead of the 3 packets
required to implement reg_write_reg_wait.
Signed-off-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Monk Liu <monk.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove arguments present on kernel-doc that are not present on the
function declaration and add the new ones if present.
Signed-off-by: Arthur Grillo <arthurgrillo@riseup.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add sdma ras function on sdma v6_0_3.
Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
SDMA0_CNTL and MMHUB system aperture related registers are blocked by L1 Policy.
Therefore, they cannot be accessed by VF and loged in violation.
[How]
For MMHUB registers, they will be programmed by PF. So VF will skip to program them in mmhubv3_0.
For SDMA0_CNTL which is a PF_only register, VF don't need to program it in sdma_v6_0.
Signed-off-by: Yifan Zha <Yifan.Zha@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Simplifies the code so that all SDMA versions will get the firmware
name from `amdgpu_ucode_ip_version_decode`.
v2: squash in fix from Srinivasan
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
SDMA0_F32_CNTL is a PF_only regitser which will be blocked by L1.
RLCG will not program the register as well.
[How]
Skip to program SDMA0_F32_CNTL under SRIOV VF.
Signed-off-by: Yifan Zha <Yifan.Zha@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch to allow secure submission on gfx11 and sdma6.
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Tim Huang <Tim.Huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update all SDMA versions that support SR-IOV to properly
tear down the ttm buffer functions on suspend.
Tested-by: Bokun Zhang <Bokun.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Switch all of the SDMA implementations to use the helper to
tear down the ttm buffer manager.
Tested-by: Bokun Zhang <Bokun.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch is to fix the SDMA user queue doorbell missing issue on
SDMA 6.0. F32_WPTR_POLL_ENABLE has to be set if doorbell mode is
used. Otherwise ringing SDMA user queue doorbell can't wake up
system from gfxoff.
Signed-off-by: Ruili Ji <ruiliji2@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.0.x
Use common function to init sdma v6 firmware ucode.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Return the sdma_v6_0_start() directly instead of storing it in another
redundant variable.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: zhang songyi <zhang.songyi@zte.com.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
As SDMA0_SEM_WAIT_FAIL_TIMER_CNTL is a PF-only register,
L1 would block this register for VF access.
[How]
VF do not program it.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Yifan Zha <Yifan.Zha@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Under SR-IOV, if VF is switched out then its doorbell will be disabled,
SDMA rely on WPTR_POLL to get doorbells which was sent during VF
switched-out time.
[How]
For SR-IOV, set SDMA WPTR_POLL_ENABLE to 1.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Horace Chen <horace.chen@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To support new sdma ip block
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Frank Min <Frank.Min@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Port aggregated doorbell support to sdma6.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Support SDMA soft reset for SDMA v6.
V3: use ib test to check soft reset.
V4: squash in unused variable fix (Alex)
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
WPTR_POLL_ENABLE = 1 was kept to support legacy doorbell programming in
SimNow environment. Disable for real hardware.
Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add sdma 6.0.1 support to sdma6 implementation.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Aaron Liu <aaron.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add functions for SDMA version 6.
Signed-off-by: Stanley Yang <Stanley.Yang@amd.com>
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
