Commit graph

17 commits

Author SHA1 Message Date
Sjur Brændeland
92b38f8514 remoteproc: support virtio config space.
Support virtio configuration space and device status. The virtio
device can now access the resource table in shared memory.

Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com>
Acked-by: Ido Yariv <ido@wizery.com>
[rebase and style changes]
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
2013-04-07 14:06:17 +03:00
Ohad Ben-Cohen
a2b950ac7b remoteproc: perserve resource table data
Copy resource table from first to second firmware loading.
After firmware is loaded to memory, update the vdevs resource
pointer to the resource table kept in device memory.

Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com>
Acked-by: Ido Yariv <ido@wizery.com>
[rebase, terminology and style changes]
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
2013-04-07 14:06:07 +03:00
Sjur Brændeland
099a3f33c8 remtoteproc: maintain max notifyid
Some of the rproc drivers (STE modem specifically) needs to know
the range of the notification IDs used for notifying the device.

Maintain a variable in struct rproc holding the largest allocated
notification id, so low-level rproc drivers could access it.

Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com>
[ohad: rebase, slightly edit commit log]
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
2012-09-18 21:55:52 +03:00
Fernando Guzman Lugo
2e37abb89a remoteproc: create a 'recovery' debugfs entry
Add a 'recovery' debugfs entry to dynamically disable/enable recovery
at runtime. This is useful when one is trying to debug an rproc crash;
without it, a recovery will immediately take place, making it harder
to debug the crash.

Contributions from Subramaniam Chanderashekarapuram.

Examples:

- disabling recovery:
$ echo disabled > <debugfs>/remoteproc/remoteproc0/recovery

- in case you want to recover a crash, but keep recovery disabled
  (useful in debugging sessions when you expect additional crashes
   you want to debug):
$ echo recover > <debugfs>/remoteproc/remoteproc0/recovery

- enabling recovery:
$ echo enabled > <debugfs>/remoteproc/remoteproc0/recovery

Signed-off-by: Fernando Guzman Lugo <fernando.lugo@ti.com>
[ohad: some white space, commentary and commit log changes]
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
2012-09-18 12:53:41 +03:00
Fernando Guzman Lugo
70b85ef83c remoteproc: add actual recovery implementation
Add rproc_trigger_recovery() which takes care of the recovery itself,
by removing, and re-adding, all of the remoteproc's virtio devices.

This resets all virtio users of the remote processor, during which
the remote processor is powered off and on again.

Signed-off-by: Fernando Guzman Lugo <fernando.lugo@ti.com>
[ohad: introduce rproc_add_virtio_devices to avoid 1.copying code 2.anomaly]
[ohad: some white space, naming and commit log changes]
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
2012-09-18 12:53:33 +03:00
Fernando Guzman Lugo
8afd519c34 remoteproc: add rproc_report_crash function to notify rproc crashes
Allow low-level remoteproc drivers to report rproc crashes by exporting
a new rproc_report_crash() function (invoking this from non-rproc drivers
is probably wrong, and should be carefully scrutinized if ever needed).

rproc_report_crash() can be called from any context; it offloads the
tasks of handling the crash to a separate thread.

Handling the crash from a separate thread is helpful because:
- Ability to call invoke rproc_report_crash() from atomic context, due to
  the fact that many crashes trigger an interrupt, so this function can be
  called directly from ISR context.
- Avoiding deadlocks which could happen if rproc_report_crash() is called
  from a function which indirectly holds the rproc lock.

Handling the crash might involve:
- Remoteproc register dump
- Remoteproc stack dump
- Remoteproc core dump
- Saving Remoteproc traces so they can be read after the crash
- Reseting the remoteproc in order to make it functional again (hard recovery)

Right now, we only print the crash type which was detected, and only the
mmufault type is supported. Remoteproc low-level drivers can add more types
when needed.

Signed-off-by: Fernando Guzman Lugo <fernando.lugo@ti.com>
[ohad: some commentary, white space and commit log changes]
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
2012-09-18 12:53:22 +03:00
Sjur Brændeland
4afc89d66c remoteproc: Support custom firmware handlers
Firmware handling is made customizable.
This is done by creating a separate ops structure for the
firmware functions that depends on a particular firmware
format (such as ELF). The ELF functions are default used
unless the HW driver explicitly injects another firmware
handler by updating rproc->fw_ops.
The function rproc_da_to_va() is exported, as custom
firmware handlers may need to use this function.

Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com>
[ohad: namespace fixes, whitespace fixes, style fixes]
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
2012-07-15 11:39:01 +03:00
Ohad Ben-Cohen
160e7c840f remoteproc: adopt the driver core's alloc/add/del/put naming
To make remoteproc's API more intuitive for developers, we adopt
the driver core's naming, i.e. alloc -> add -> del -> put. We'll also
add register/unregister when their first user shows up.

Otherwise - there's no functional change here.

Suggested by Russell King <linux@arm.linux.org.uk>.

Cc: Russell King <linux@arm.linux.org.uk>
Cc: Fernando Guzman Lugo <fernando.lugo@ti.com>
Cc: Sjur Brændeland <sjur.brandeland@stericsson.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
2012-07-06 00:53:27 +03:00
Ohad Ben-Cohen
40e575b1d0 remoteproc: remove the get_by_name/put API
Remove rproc_get_by_name() and rproc_put(), and the associated
remoteproc infrastructure that supports it (i.e. klist and friends),
because:

1. No one uses them
2. Using them is highly discouraged, and any potential user
   will be deeply scrutinized and encouraged to move.

If a user, that absolutely can't live with the direct boot/shutdown
model, does show up one day, then bringing this functionality back
is going to be trivial.

At this point though, keeping this functionality around is way too
much of a maintenance burden.

Cc: Sjur Brændeland <sjur.brandeland@stericsson.com>
Cc: Loic Pallardy <loic.pallardy@stericsson.com>
Cc: Ludovic BARRE <ludovic.barre@stericsson.com>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Fernando Guzman Lugo <fernando.lugo@ti.com>
Cc: Suman Anna <s-anna@ti.com>
Cc: Mark Grosen <mgrosen@ti.com>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
2012-07-06 00:53:27 +03:00
Ohad Ben-Cohen
7183a2a799 remoteproc: remove the now-redundant kref
Now that every rproc instance contains a device, we don't need a
kref anymore to maintain the refcount of the rproc instances:
that's what device are good with!

This patch removes the now-redundant kref, and switches to
{get, put}_device instead of kref_{get, put}.

We also don't need the kref's release function anymore, and instead,
we just utilize the class's release handler (which is now responsible
for all memory de-allocations).

Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Fernando Guzman Lugo <fernando.lugo@ti.com>
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
2012-07-06 00:53:25 +03:00
Ohad Ben-Cohen
b5ab5e24e9 remoteproc: maintain a generic child device for each rproc
For each registered rproc, maintain a generic remoteproc device whose
parent is the low level platform-specific device (commonly a pdev, but
it may certainly be any other type of device too).

With this in hand, the resulting device hierarchy might then look like:

omap-rproc.0
 |
 - remoteproc0  <---- new !
    |
    - virtio0
    |
    - virtio1
       |
       - rpmsg0
       |
       - rpmsg1
       |
       - rpmsg2

Where:
- omap-rproc.0 is the low level device that's bound to the
  driver which invokes rproc_register()
- remoteproc0 is the result of this patch, and will be added by the
  remoteproc framework when rproc_register() is invoked
- virtio0 and virtio1 are vdevs that are registered by remoteproc
  when it realizes that they are supported by the firmware
  of the physical remote processor represented by omap-rproc.0
- rpmsg0, rpmsg1 and rpmsg2 are rpmsg devices that represent rpmsg
  channels, and are registerd by the rpmsg bus when it gets notified
  about their existence

Technically, this patch:
- changes 'struct rproc' to contain this generic remoteproc.x device
- creates a new "remoteproc" type, to which this new generic remoteproc.x
  device belong to.
- adds a super simple enumeration method for the indices of the
  remoteproc.x devices
- updates all dev_* messaging to use the generic remoteproc.x device
  instead of the low level platform-specific device
- updates all dma_* allocations to use the parent of remoteproc.x (where
  the platform-specific memory pools, most commonly CMA, are to be found)

Adding this generic device has several merits:
- we can now add remoteproc runtime PM support simply by hooking onto the
  new "remoteproc" type
- all remoteproc log messages will now carry a common name prefix
  instead of having a platform-specific one
- having a device as part of the rproc struct makes it possible to simplify
  refcounting (see subsequent patch)

Thanks to Stephen Boyd <sboyd@codeaurora.org> for suggesting and
discussing these ideas in one of the remoteproc review threads and
to Fernando Guzman Lugo <fernando.lugo@ti.com> for trying them out
with the (upcoming) runtime PM support for remoteproc.

Cc: Fernando Guzman Lugo <fernando.lugo@ti.com>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
2012-07-06 00:53:03 +03:00
Ohad Ben-Cohen
63140e0ed2 remoteproc: remove the hardcoded vring alignment
Remove the hardcoded vring alignment of 4096 bytes,
and instead utilize tha vring alignment as specified in
the resource table.

This is needed for remote processors that have rigid
memory requirement, and which have found the alignment of
4096 bytes to be excessively big.

Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
Cc: Brian Swetland <swetland@google.com>
Cc: Iliyan Malchev <malchev@google.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Mark Grosen <mgrosen@ti.com>
Cc: John Williams <john.williams@petalogix.com>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Loic PALLARDY <loic.pallardy@stericsson.com>
Cc: Ludovic BARRE <ludovic.barre@stericsson.com>
Cc: Omar Ramirez Luna <omar.luna@linaro.org>
Cc: Guzman Lugo Fernando <fernando.lugo@ti.com>
Cc: Anna Suman <s-anna@ti.com>
Cc: Clark Rob <rob@ti.com>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Saravana Kannan <skannan@codeaurora.org>
Cc: David Brown <davidb@codeaurora.org>
Cc: Kieran Bingham <kieranbingham@gmail.com>
Cc: Tony Lindgren <tony@atomide.com>
2012-03-06 19:14:37 +02:00
Ohad Ben-Cohen
7a18694162 remoteproc: remove the single rpmsg vdev limitation
Now that the resource table supports publishing a virtio device
in a single resource entry, firmware images can start supporting
more than a single vdev.

This patch removes the single vdev limitation of the remoteproc
framework so multi-vdev firmwares can be leveraged: VDEV resource
entries are parsed when the rproc is registered, and as a result
their vrings are set up and the virtio devices are registered
(and they go away when the rproc goes away).

Moreover, we no longer only support VIRTIO_ID_RPMSG vdevs; any
virtio device type goes now. As a result, there's no more any
rpmsg-specific APIs or code in remoteproc: it all becomes generic
virtio handling.

Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
Cc: Brian Swetland <swetland@google.com>
Cc: Iliyan Malchev <malchev@google.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Mark Grosen <mgrosen@ti.com>
Cc: John Williams <john.williams@petalogix.com>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Loic PALLARDY <loic.pallardy@stericsson.com>
Cc: Ludovic BARRE <ludovic.barre@stericsson.com>
Cc: Omar Ramirez Luna <omar.luna@linaro.org>
Cc: Guzman Lugo Fernando <fernando.lugo@ti.com>
Cc: Anna Suman <s-anna@ti.com>
Cc: Clark Rob <rob@ti.com>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Saravana Kannan <skannan@codeaurora.org>
Cc: David Brown <davidb@codeaurora.org>
Cc: Kieran Bingham <kieranbingham@gmail.com>
Cc: Tony Lindgren <tony@atomide.com>
2012-03-06 19:14:12 +02:00
Ohad Ben-Cohen
fd2c15ec1d remoteproc: resource table overhaul
The resource table is an array of 'struct fw_resource' members, where
each resource entry is expressed as a single member of that array.

This approach got us this far, but it has a few drawbacks:

1. Different resource entries end up overloading the same members of 'struct
   fw_resource' with different meanings. The resulting code is error prone
   and hard to read and maintain.

2. It's impossible to extend 'struct fw_resource' without breaking the
   existing firmware images (and we already want to: we can't introduce the
   new virito device resource entry with the current scheme).

3. It doesn't scale: 'struct fw_resource' must be as big as the largest
   resource entry type. As a result, smaller resource entries end up
   utilizing only small part of it.

This is fixed by defining a dedicated structure for every resource type,
and then converting the resource table to a list of type-value members.
Instead of a rigid array of homogeneous structs, the resource table
is turned into a collection of heterogeneous structures.

This way:
1. Resource entries consume exactly the amount of bytes they need.
2. It's easy to extend: just create a new resource entry structure, and assign
   it a new type.
3. The code is easier to read and maintain: the structures' members names are
   meaningful.

While we're at it, this patch has several other resource table changes:
1. The resource table gains a simple header which contains the
   number of entries in the table and their offsets within the table. This
   makes the parsing code simpler and easier to read.
2. A version member is added to the resource table. Should we change the
   format again, we'll bump up this version to prevent breakage with
   existing firmware images.
3. The VRING and VIRTIO_DEV resource entries are combined to a single
   VDEV entry. This paves the way to supporting multiple VDEV entries.
4. Since we don't really support 64-bit rprocs yet, convert two stray u64
   members to u32.

Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
Cc: Brian Swetland <swetland@google.com>
Cc: Iliyan Malchev <malchev@google.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Mark Grosen <mgrosen@ti.com>
Cc: John Williams <john.williams@petalogix.com>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Loic PALLARDY <loic.pallardy@stericsson.com>
Cc: Ludovic BARRE <ludovic.barre@stericsson.com>
Cc: Omar Ramirez Luna <omar.luna@linaro.org>
Cc: Guzman Lugo Fernando <fernando.lugo@ti.com>
Cc: Anna Suman <s-anna@ti.com>
Cc: Clark Rob <rob@ti.com>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Saravana Kannan <skannan@codeaurora.org>
Cc: David Brown <davidb@codeaurora.org>
Cc: Kieran Bingham <kieranbingham@gmail.com>
Cc: Tony Lindgren <tony@atomide.com>
2012-03-06 19:13:39 +02:00
Ohad Ben-Cohen
e12bc14b88 remoteproc: s/big switch/lookup table/
A lookup table would be easier to extend, and the resulting
code is a bit cleaner.

Reported-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
2012-02-22 18:28:49 +02:00
Ohad Ben-Cohen
2fd51811b8 remoteproc: remove unused resource type
RSC_VIRTIO_CFG isn't being used, so remove it.

Originally it was introduced to overcome a resource table limitation
that prevented describing a virtio device in a single resource table
entry.

The plan though is to describe resource table entries in a TLV fashion,
where each entry will consume the amount of space it requires,
so the original limitation is anyway temporary.

Reported-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
2012-02-08 22:54:24 +02:00
Ohad Ben-Cohen
400e64df6b remoteproc: add framework for controlling remote processors
Modern SoCs typically employ a central symmetric multiprocessing (SMP)
application processor running Linux, with several other asymmetric
multiprocessing (AMP) heterogeneous processors running different instances
of operating system, whether Linux or any other flavor of real-time OS.

Booting a remote processor in an AMP configuration typically involves:
- Loading a firmware which contains the OS image
- Allocating and providing it required system resources (e.g. memory)
- Programming an IOMMU (when relevant)
- Powering on the device

This patch introduces a generic framework that allows drivers to do
that. In the future, this framework will also include runtime power
management and error recovery.

Based on (but now quite far from) work done by Fernando Guzman Lugo
<fernando.lugo@ti.com>.

ELF loader was written by Mark Grosen <mgrosen@ti.com>, based on
msm's Peripheral Image Loader (PIL) by Stephen Boyd <sboyd@codeaurora.org>.

Designed with Brian Swetland <swetland@google.com>.

Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Cc: Brian Swetland <swetland@google.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Greg KH <greg@kroah.com>
Cc: Stephen Boyd <sboyd@codeaurora.org>
2012-02-08 22:52:56 +02:00