- Add infrastructure for supporting background commands along with
support for device sanitization and firmware update
- Introduce a CXL performance monitoring unit driver based on the common
definition in the specification.
- Land some preparatory cleanup and refactoring for the anticipated
arrival of CXL type-2 (accelerator devices) and CXL RCH (CXL-v1.1
topology) error handling.
- Rework CPU cache management with respect to region configuration
(device hotplug or other dynamic changes to memory interleaving)
- Fix region reconfiguration vs CXL decoder ordering rules.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSbo+XnGs+rwLz9XGXfioYZHlFsZwUCZJ9fkQAKCRDfioYZHlFs
ZyWcAP9THJ6ZzX1mbAfHhPz9r+oxsrE3l1jQpNjNbh7MNW29MAEA36dmTE62JaHK
lTPDgHxqBt1vrHPktYWOM9ZPHE2tLwA=
=3fFL
-----END PGP SIGNATURE-----
Merge tag 'cxl-for-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull CXL updates from Dan Williams:
"The highlights in terms of new functionality are support for the
standard CXL Performance Monitor definition that appeared in CXL 3.0,
support for device sanitization (wiping all data from a device),
secure-erase (re-keying encryption of user data), and support for
firmware update. The firmware update support is notable as it reuses
the simple sysfs_upload interface to just cat(1) a blob to a sysfs
file and pipe that to the device.
Additionally there are a substantial number of cleanups and
reorganizations to get ready for RCH error handling (RCH == Restricted
CXL Host == current shipping hardware generation / pre CXL-2.0
topologies) and type-2 (accelerator / vendor specific) devices.
For vendor specific devices they implement a subset of what the
generic type-3 (generic memory expander) driver expects. As a result
the rework decouples optional infrastructure from the core driver
context.
For RCH topologies, where the specification working group did not want
to confuse pre-CXL-aware operating systems, many of the standard
registers are hidden which makes support standard bus features like
AER (PCIe Advanced Error Reporting) difficult. The rework arranges for
the driver to help the PCI-AER core. Bjorn is on board with this
direction but a late regression disocvery means the completion of this
functionality needs to cook a bit longer, so it is code
reorganizations only for now.
Summary:
- Add infrastructure for supporting background commands along with
support for device sanitization and firmware update
- Introduce a CXL performance monitoring unit driver based on the
common definition in the specification.
- Land some preparatory cleanup and refactoring for the anticipated
arrival of CXL type-2 (accelerator devices) and CXL RCH (CXL-v1.1
topology) error handling.
- Rework CPU cache management with respect to region configuration
(device hotplug or other dynamic changes to memory interleaving)
- Fix region reconfiguration vs CXL decoder ordering rules"
* tag 'cxl-for-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (51 commits)
cxl: Fix one kernel-doc comment
cxl/pci: Use correct flag for sanitize polling
docs: perf: Minimal introduction the the CXL PMU device and driver
perf: CXL Performance Monitoring Unit driver
tools/testing/cxl: add firmware update emulation to CXL memdevs
tools/testing/cxl: Use named effects for the Command Effect Log
tools/testing/cxl: Fix command effects for inject/clear poison
cxl: add a firmware update mechanism using the sysfs firmware loader
cxl/test: Add Secure Erase opcode support
cxl/mem: Support Secure Erase
cxl/test: Add Sanitize opcode support
cxl/mem: Wire up Sanitization support
cxl/mbox: Add sanitization handling machinery
cxl/mem: Introduce security state sysfs file
cxl/mbox: Allow for IRQ_NONE case in the isr
Revert "cxl/port: Enable the HDM decoder capability for switch ports"
cxl/memdev: Formalize endpoint port linkage
cxl/pci: Unconditionally unmask 256B Flit errors
cxl/region: Manage decoder target_type at decoder-attach time
cxl/hdm: Default CXL_DEVTYPE_DEVMEM decoders to CXL_DECODER_DEVMEM
...
* Support for ACPI.
* Various cleanups to the ISA string parsing, including making them
case-insensitive
* Support for the vector extension.
* Support for independent irq/softirq stacks.
* Our CPU DT binding now has "unevaluatedProperties: false"
-----BEGIN PGP SIGNATURE-----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=Fpq8
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-6.5-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- Support for ACPI
- Various cleanups to the ISA string parsing, including making them
case-insensitive
- Support for the vector extension
- Support for independent irq/softirq stacks
- Our CPU DT binding now has "unevaluatedProperties: false"
* tag 'riscv-for-linus-6.5-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (78 commits)
riscv: hibernate: remove WARN_ON in save_processor_state
dt-bindings: riscv: cpus: switch to unevaluatedProperties: false
dt-bindings: riscv: cpus: add a ref the common cpu schema
riscv: stack: Add config of thread stack size
riscv: stack: Support HAVE_SOFTIRQ_ON_OWN_STACK
riscv: stack: Support HAVE_IRQ_EXIT_ON_IRQ_STACK
RISC-V: always report presence of extensions formerly part of the base ISA
dt-bindings: riscv: explicitly mention assumption of Zicntr & Zihpm support
RISC-V: remove decrement/increment dance in ISA string parser
RISC-V: rework comments in ISA string parser
RISC-V: validate riscv,isa at boot, not during ISA string parsing
RISC-V: split early & late of_node to hartid mapping
RISC-V: simplify register width check in ISA string parsing
perf: RISC-V: Limit the number of counters returned from SBI
riscv: replace deprecated scall with ecall
riscv: uprobes: Restore thread.bad_cause
riscv: mm: try VMA lock-based page fault handling first
riscv: mm: Pre-allocate PGD entries for vmalloc/modules area
RISC-V: hwprobe: Expose Zba, Zbb, and Zbs
RISC-V: Track ISA extensions per hart
...
top-level directories.
- Douglas Anderson has added a new "buddy" mode to the hardlockup
detector. It permits the detector to work on architectures which
cannot provide the required interrupts, by having CPUs periodically
perform checks on other CPUs.
- Zhen Lei has enhanced kexec's ability to support two crash regions.
- Petr Mladek has done a lot of cleanup on the hard lockup detector's
Kconfig entries.
- And the usual bunch of singleton patches in various places.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZJelTAAKCRDdBJ7gKXxA
juDkAP0VXWynzkXoojdS/8e/hhi+htedmQ3v2dLZD+vBrctLhAEA7rcH58zAVoWa
2ejqO6wDrRGUC7JQcO9VEjT0nv73UwU=
=F293
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2023-06-24-19-23' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-mm updates from Andrew Morton:
- Arnd Bergmann has fixed a bunch of -Wmissing-prototypes in top-level
directories
- Douglas Anderson has added a new "buddy" mode to the hardlockup
detector. It permits the detector to work on architectures which
cannot provide the required interrupts, by having CPUs periodically
perform checks on other CPUs
- Zhen Lei has enhanced kexec's ability to support two crash regions
- Petr Mladek has done a lot of cleanup on the hard lockup detector's
Kconfig entries
- And the usual bunch of singleton patches in various places
* tag 'mm-nonmm-stable-2023-06-24-19-23' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (72 commits)
kernel/time/posix-stubs.c: remove duplicated include
ocfs2: remove redundant assignment to variable bit_off
watchdog/hardlockup: fix typo in config HARDLOCKUP_DETECTOR_PREFER_BUDDY
powerpc: move arch_trigger_cpumask_backtrace from nmi.h to irq.h
devres: show which resource was invalid in __devm_ioremap_resource()
watchdog/hardlockup: define HARDLOCKUP_DETECTOR_ARCH
watchdog/sparc64: define HARDLOCKUP_DETECTOR_SPARC64
watchdog/hardlockup: make HAVE_NMI_WATCHDOG sparc64-specific
watchdog/hardlockup: declare arch_touch_nmi_watchdog() only in linux/nmi.h
watchdog/hardlockup: make the config checks more straightforward
watchdog/hardlockup: sort hardlockup detector related config values a logical way
watchdog/hardlockup: move SMP barriers from common code to buddy code
watchdog/buddy: simplify the dependency for HARDLOCKUP_DETECTOR_PREFER_BUDDY
watchdog/buddy: don't copy the cpumask in watchdog_next_cpu()
watchdog/buddy: cleanup how watchdog_buddy_check_hardlockup() is called
watchdog/hardlockup: remove softlockup comment in touch_nmi_watchdog()
watchdog/hardlockup: in watchdog_hardlockup_check() use cpumask_copy()
watchdog/hardlockup: don't use raw_cpu_ptr() in watchdog_hardlockup_kick()
watchdog/hardlockup: HAVE_NMI_WATCHDOG must implement watchdog_hardlockup_probe()
watchdog/hardlockup: keep kernel.nmi_watchdog sysctl as 0444 if probe fails
...
- Support for the Armv8.9 Permission Indirection Extensions. While this
feature doesn't add new functionality, it enables future support for
Guarded Control Stacks (GCS) and Permission Overlays.
- User-space support for the Armv8.8 memcpy/memset instructions.
- arm64 perf: support the HiSilicon SoC uncore PMU, Arm CMN sysfs
identifier, support for the NXP i.MX9 SoC DDRC PMU, fixes and
cleanups.
- Removal of superfluous ISBs on context switch (following retrospective
architecture tightening).
- Decode the ISS2 register during faults for additional information to
help with debugging.
- KPTI clean-up/simplification of the trampoline exit code.
- Addressing several -Wmissing-prototype warnings.
- Kselftest improvements for signal handling and ptrace.
- Fix TPIDR2_EL0 restoring on sigreturn
- Clean-up, robustness improvements of the module allocation code.
- More sysreg conversions to the automatic register/bitfields
generation.
- CPU capabilities handling cleanup.
- Arm documentation updates: ACPI, ptdump.
-----BEGIN PGP SIGNATURE-----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=rNBK
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
"Notable features are user-space support for the memcpy/memset
instructions and the permission indirection extension.
- Support for the Armv8.9 Permission Indirection Extensions. While
this feature doesn't add new functionality, it enables future
support for Guarded Control Stacks (GCS) and Permission Overlays
- User-space support for the Armv8.8 memcpy/memset instructions
- arm64 perf: support the HiSilicon SoC uncore PMU, Arm CMN sysfs
identifier, support for the NXP i.MX9 SoC DDRC PMU, fixes and
cleanups
- Removal of superfluous ISBs on context switch (following
retrospective architecture tightening)
- Decode the ISS2 register during faults for additional information
to help with debugging
- KPTI clean-up/simplification of the trampoline exit code
- Addressing several -Wmissing-prototype warnings
- Kselftest improvements for signal handling and ptrace
- Fix TPIDR2_EL0 restoring on sigreturn
- Clean-up, robustness improvements of the module allocation code
- More sysreg conversions to the automatic register/bitfields
generation
- CPU capabilities handling cleanup
- Arm documentation updates: ACPI, ptdump"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (124 commits)
kselftest/arm64: Add a test case for TPIDR2 restore
arm64/signal: Restore TPIDR2 register rather than memory state
arm64: alternatives: make clean_dcache_range_nopatch() noinstr-safe
Documentation/arm64: Add ptdump documentation
arm64: hibernate: remove WARN_ON in save_processor_state
kselftest/arm64: Log signal code and address for unexpected signals
docs: perf: Fix warning from 'make htmldocs' in hisi-pmu.rst
arm64/fpsimd: Exit streaming mode when flushing tasks
docs: perf: Add new description for HiSilicon UC PMU
drivers/perf: hisi: Add support for HiSilicon UC PMU driver
drivers/perf: hisi: Add support for HiSilicon H60PA and PAv3 PMU driver
perf: arm_cspmu: Add missing MODULE_DEVICE_TABLE
perf/arm-cmn: Add sysfs identifier
perf/arm-cmn: Revamp model detection
perf/arm_dmc620: Add cpumask
arm64: mm: fix VA-range sanity check
arm64/mm: remove now-superfluous ISBs from TTBR writes
Documentation/arm64: Update ACPI tables from BBR
Documentation/arm64: Update references in arm-acpi
Documentation/arm64: Update ARM and arch reference
...
CXL rev 3.0 introduces a standard performance monitoring hardware
block to CXL. Instances are discovered using CXL Register Locator DVSEC
entries. Each CXL component may have multiple PMUs.
This initial driver supports a subset of types of counter.
It supports counters that are either fixed or configurable, but requires
that they support the ability to freeze and write value whilst frozen.
Development done with QEMU model which will be posted shortly.
Example:
$ perf stat -a -e cxl_pmu_mem0.0/h2d_req_snpcur/ -e cxl_pmu_mem0.0/h2d_req_snpdata/ -e cxl_pmu_mem0.0/clock_ticks/ sleep 1
Performance counter stats for 'system wide':
96,757,023,244,321 cxl_pmu_mem0.0/h2d_req_snpcur/
96,757,023,244,365 cxl_pmu_mem0.0/h2d_req_snpdata/
193,514,046,488,653 cxl_pmu_mem0.0/clock_ticks/
1.090539600 seconds time elapsed
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20230526095824.16336-5-Jonathan.Cameron@huawei.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Perf gets the number of supported counters from SBI. If it happens that
the number of returned counters more than RISCV_MAX_COUNTERS the code
trusts it. It does not lead to an immediate problem but can potentially
lead to it. Prevent getting more than RISCV_MAX_COUNTERS from SBI.
Signed-off-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20230505072058.1049732-1-v.v.mitrofanov@yadro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Currently the PMU driver is using DT based lookup to
find the INTC node for sscofpmf extension. This will not work
for ACPI based systems causing the driver to fail to register
the PMU overflow interrupt handler.
Hence, change the code to use the standard interface to find
the INTC node which works irrespective of DT or ACPI.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20230607112417.782085-3-sunilvl@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
On HiSilicon Hip09 platform, there are 4 UC (unified cache) modules
on each chip CCL (CPU Cluster). UC is a cache that provides
coherence between NUMA and UMA domains. It is located between L2
and Memory System. Many PMU events are supported. Let's support
the UC PMU driver using the HiSilicon uncore PMU framework.
* rd_req_en : rd_req_en is the abbreviation of read request tracetag
enable and allows user to count only read operations. Details are listed
in the hisi-pmu document at Documentation/admin-guide/perf/hisi-pmu.rst
* srcid_en & srcid: Allows users to filter statistical information based
on specific CPU/ICL by srcid.
srcid_en depends on rd_req_en being enabled.
* uring_channel: Allows users to filter statistical information based on
the specified tx request uring channel.
uring_channel only supported events: [0x47 ~ 0x59].
Signed-off-by: Junhao He <hejunhao3@huawei.com>
Reviewed-by: Yicong Yang <yangyicong@hisilicon.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20230615125926.29832-3-hejunhao3@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
Compared to the original PA device, H60PA offers higher bandwidth.
The H60PA is a new device and we use HID to differentiate them.
The events supported by PAv3 and PAv2 are different. The PAv3 PMU
removed some events which are supported by PAv2 PMU. The older PA
PMU driver will probe v3 as v2. Therefore PA events displayed by
"perf list" cannot work properly. We add the HISI0275 HID for PAv3
PMU to distinguish different.
For each H60PA PMU, except for the overflow interrupt register, other
functions of the H60PA PMU are the same as the original PA PMU module.
It has 8-programable counters and each counter is free-running.
Interrupt is supported to handle counter (64-bits) overflow.
Signed-off-by: Junhao He <hejunhao3@huawei.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Yicong Yang <yangyicong@hisilicon.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20230615125926.29832-2-hejunhao3@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
Expose a sysfs identifier encapsulating the CMN part number and revision
so that jevents can narrow down a fundamental set of possible events for
calculating metrics. Configuration-dependent aspects - such as whether a
given node type is present, and/or a given node ID is valid - are still
not covered, and in general it's hard to see how userspace could handle
them, so we won't be removing any data or validation logic from the
driver any time soon, but at least it's a step in a useful direction.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-and-tested-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Tested-by: Jing Zhang <renyu.zj@linux.alibaba.com>
Link: https://lore.kernel.org/r/b8a14c14fcdf028939ebf57849863e8ae01743de.1686588640.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
CMN implements a set of CoreSight-format peripheral ID registers which
in principle we should be able to use to identify the hardware. However
so far we have avoided trying to use the part number field since the
TRMs have all described it as "configuration dependent". It turns out,
though, that this is a quirk of the documentation generation process,
and in fact the part number should always be a stable well-defined field
which we can trust.
To that end, revamp our model detection to rely less on ACPI/DT, and
pave the way towards further using the hardware information as an
identifier for userspace jevent metrics. This includes renaming the
revision constants to maximise readability.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-and-tested-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Link: https://lore.kernel.org/r/3c791eaae814b0126f9adbd5419bfb4a600dade7.1686588640.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Add a cpumask for the DMC620 PMU. As it is an uncore PMU, perf
userspace tool only needs to open a single counter on the CPU
specified by the CPU mask for each event on a given DMC620 device.
Signed-off-by: Xin Yang <xin.yang@arm.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/20230613013423.2078397-1-xin.yang@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
With the recent feature added to enable perf events to use pseudo NMIs as
interrupts on platforms which support GICv3 or later, its now been
possible to enable hard lockup detector (or NMI watchdog) on arm64
platforms. So enable corresponding support.
One thing to note here is that normally lockup detector is initialized
just after the early initcalls but PMU on arm64 comes up much later as
device_initcall(). To cope with that, override
arch_perf_nmi_is_available() to let the watchdog framework know PMU not
ready, and inform the framework to re-initialize lockup detection once PMU
has been initialized.
[dianders@chromium.org: only HAVE_HARDLOCKUP_DETECTOR_PERF if the PMU config is enabled]
Link: https://lkml.kernel.org/r/20230523073952.1.I60217a63acc35621e13f10be16c0cd7c363caf8c@changeid
Link: https://lkml.kernel.org/r/20230519101840.v5.18.Ia44852044cdcb074f387e80df6b45e892965d4a1@changeid
Co-developed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Co-developed-by: Pingfan Liu <kernelfans@gmail.com>
Signed-off-by: Pingfan Liu <kernelfans@gmail.com>
Signed-off-by: Lecopzer Chen <lecopzer.chen@mediatek.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Colin Cross <ccross@android.com>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Guenter Roeck <groeck@chromium.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masayoshi Mizuma <msys.mizuma@gmail.com>
Cc: Matthias Kaehlcke <mka@chromium.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: "Ravi V. Shankar" <ravi.v.shankar@intel.com>
Cc: Ricardo Neri <ricardo.neri@intel.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Stephen Boyd <swboyd@chromium.org>
Cc: Tzung-Bi Shih <tzungbi@chromium.org>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add ddr performance monitor support for i.MX93.
There are 11 counters for ddr performance events.
- Counter 0 is a 64-bit counter that counts only clock cycles.
- Counter 1-10 are 32-bit counters that can monitor counter-specific
events in addition to counting reference events.
For example:
perf stat -a -e imx9_ddr0/ddrc_pm_1,counter=1/,imx9_ddr0/ddrc_pm_2,counter=2/ ls
Besides, this ddr pmu support AXI filter capability. It's implemented as
counter-specific events. It now supports read transaction, write transaction
and read beat events which corresponding respecitively to counter 2, 3 and 4.
axi_mask and axi_id need to be as event parameters.
For example:
perf stat -a -I 1000 -e imx9_ddr0/eddrtq_pm_rd_trans_filt,counter=2,axi_mask=ID_MASK,axi_id=ID/
perf stat -a -I 1000 -e imx9_ddr0/eddrtq_pm_wr_trans_filt,counter=3,axi_mask=ID_MASK,axi_id=ID/
perf stat -a -I 1000 -e imx9_ddr0/eddrtq_pm_rd_beat_filt,counter=4,axi_mask=ID_MASK,axi_id=ID/
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20230418102910.2065651-1-xu.yang_2@nxp.com
[will: Remove redundant error message on platform_get_irq() failure]
Signed-off-by: Will Deacon <will@kernel.org>
The functional paths of the driver need not care about ACPI, so abstract
the property of atomic doubleword access as its own flag (repacking the
structure for a better fit). We also do not need to go poking directly
at the APMT for standard resources which the ACPI layer has already
dealt with, so deal with the optional MMIO page and interrupt in the
normal firmware-agnostic manner. The few remaining portions of probing
that *are* APMT-specific can still easily retrieve the APMT pointer as
needed without us having to carry a duplicate copy around everywhere.
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-and-tested-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Link: https://lore.kernel.org/r/88f97268603e1aa6016d178982a1dc2861f6770d.1685983270.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Build-wise, the ACPI dependency consists of only a couple of things
which could probably stand being factored out into ACPI helpers anyway.
However for the immediate concern of working towards Devicetree support
here, it's easy enough to make a few tweaks to contain the affected code
locally, such that we can relax the Kconfig dependency.
Reviewed-and-Tested-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/9d126711c7498b199b3e6f5cf48ca60ffb9df54c.1685983270.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
ARM_CSPMU_EVENT_ATTR() defines a struct perf_pmu_events_attr, so
arm_cspmu_sysfs_event_show() should not be interpreting it as struct
dev_ext_attribute.
Fixes: e37dfd6573 ("perf: arm_cspmu: Add support for ARM CoreSight PMU driver")
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-and-tested-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/27c0804af64007b2400abbc40278f642ee6a0a29.1685983270.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
The driver needs to migrate the perf context if the current using CPU going
to teardown. By the time calling the cpuhp::teardown() callback the
cpu_online_mask() hasn't updated yet and still includes the CPU going to
teardown. In current driver's implementation we may migrate the context
to the teardown CPU and leads to the below calltrace:
...
[ 368.104662][ T932] task:cpuhp/0 state:D stack: 0 pid: 15 ppid: 2 flags:0x00000008
[ 368.113699][ T932] Call trace:
[ 368.116834][ T932] __switch_to+0x7c/0xbc
[ 368.120924][ T932] __schedule+0x338/0x6f0
[ 368.125098][ T932] schedule+0x50/0xe0
[ 368.128926][ T932] schedule_preempt_disabled+0x18/0x24
[ 368.134229][ T932] __mutex_lock.constprop.0+0x1d4/0x5dc
[ 368.139617][ T932] __mutex_lock_slowpath+0x1c/0x30
[ 368.144573][ T932] mutex_lock+0x50/0x60
[ 368.148579][ T932] perf_pmu_migrate_context+0x84/0x2b0
[ 368.153884][ T932] hisi_pcie_pmu_offline_cpu+0x90/0xe0 [hisi_pcie_pmu]
[ 368.160579][ T932] cpuhp_invoke_callback+0x2a0/0x650
[ 368.165707][ T932] cpuhp_thread_fun+0xe4/0x190
[ 368.170316][ T932] smpboot_thread_fn+0x15c/0x1a0
[ 368.175099][ T932] kthread+0x108/0x13c
[ 368.179012][ T932] ret_from_fork+0x10/0x18
...
Use function cpumask_any_but() to find one correct active cpu to fixes
this issue.
Fixes: 8404b0fbc7 ("drivers/perf: hisi: Add driver for HiSilicon PCIe PMU")
Signed-off-by: Junhao He <hejunhao3@huawei.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Yicong Yang <yangyicong@hisilicon.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20230608114326.27649-1-hejunhao3@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
Sidharth reports that on M2, the PMU never generates any interrupt
when using 'perf record', which is a annoying as you get no sample.
I'm temped to say "no sample, no problem", but others may have
a different opinion.
Upon investigation, it appears that the counters on M2 are
significantly different from the ones on M1, as they count on
64 bits instead of 48. Which of course, in the fine M1 tradition,
means that we can only use 63 bits, as the top bit is used to signal
the interrupt...
This results in having to introduce yet another flag to indicate yet
another odd counter width. Who knows what the next crazy implementation
will do...
With this, perf can work out the correct offset, and 'perf record'
works as intended.
Tested on M2 and M2-Pro CPUs.
Cc: Janne Grunau <j@jannau.net>
Cc: Hector Martin <marcan@marcan.st>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Fixes: 7d0bfb7c99 ("drivers/perf: apple_m1: Add Apple M2 support")
Reported-by: Sidharth Kshatriya <sid.kshatriya@gmail.com>
Tested-by: Sidharth Kshatriya <sid.kshatriya@gmail.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230528080205.288446-1-maz@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
It turns out that my naive DTC reset logic fails to work as intended,
since, after checking with the hardware designers, the PMU actually
needs to be fully enabled in order to correctly clear any pending
overflows. Therefore, invert the sequence to start with turning on both
enables so that we can reliably get the DTCs into a known state, then
moving to our normal counters-stopped state from there. Since all the
DTM counters have already been unpaired during the initial discovery
pass, we just need to additionally reset the cycle counters to ensure
that no other unexpected overflows occur during this period.
Fixes: 0ba64770a2 ("perf: Add Arm CMN-600 PMU driver")
Reported-by: Geoff Blake <blakgeof@amazon.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/0ea4559261ea394f827c9aee5168c77a60aaee03.1684946389.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
If an error occurs after calling list_add(), the &l2cache_pmu->clusters
list will reference some memory that will be freed when the managed
resources will be released.
Move the list_add() at the end of the function when everything is in fine.
This is harmless because if l2_cache_pmu_probe_cluster() fails, then
l2_cache_pmu_probe() will fail as well and 'l2cache_pmu' will be released
as well.
But it looks cleaner and could silence static checker warning.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/6a0f5bdb6b7b2ed4ef194fc49693e902ad5b95ea.1684397879.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Will Deacon <will@kernel.org>
When the 'mask' bitmap is cleared, it is better to use its full maximum
size instead of only the needed size.
This lets the compiler optimize it because the size is now known at compile
time. HW_CNTRS_MAX is small (i.e. currently 9), so a call to memset() is
saved.
Also, as 'mask' is local to the function, the non-atomic __set_bit() can
also safely be used here.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/88d4e20d595f771396e9d558c1587eb4494057db.1682022422.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Will Deacon <will@kernel.org>
Currently, with VHE, KVM sets ER, CR, SW and EN bits of
PMUSERENR_EL0 to 1 on vcpu_load(), and saves and restores
the register value for the host on vcpu_load() and vcpu_put().
If the value of those bits are cleared on a pCPU with a vCPU
loaded (armv8pmu_start() would do that when PMU counters are
programmed for the guest), PMU access from the guest EL0 might
be trapped to the guest EL1 directly regardless of the current
PMUSERENR_EL0 value of the vCPU.
Fix this by not letting armv8pmu_start() overwrite PMUSERENR_EL0
on the pCPU where PMUSERENR_EL0 for the guest is loaded, and
instead updating the saved shadow register value for the host
so that the value can be restored on vcpu_put() later.
While vcpu_{put,load}() are manipulating PMUSERENR_EL0, disable
IRQs to prevent a race condition between these processes and IPIs
that attempt to update PMUSERENR_EL0 for the host EL0.
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Suggested-by: Marc Zyngier <maz@kernel.org>
Fixes: 83a7a4d643 ("arm64: perf: Enable PMU counter userspace access for perf event")
Signed-off-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230603025035.3781797-3-reijiw@google.com
sbi_probe_extension() is specified with "Returns 0 if the given SBI
extension ID (EID) is not available, or 1 if it is available unless
defined as any other non-zero value by the implementation."
Additionally, sbiret.value is a long. Fix the implementation to
ensure any nonzero long value is considered a success, rather
than only positive int values.
Fixes: b9dcd9e415 ("RISC-V: Add basic support for SBI v0.2")
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230427163626.101042-1-ajones@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
ACPI:
* Improve error reporting when failing to manage SDEI on AGDI device
removal
Assembly routines:
* Improve register constraints so that the compiler can make use of
the zero register instead of moving an immediate #0 into a GPR
* Allow the compiler to allocate the registers used for CAS
instructions
CPU features and system registers:
* Cleanups to the way in which CPU features are identified from the
ID register fields
* Extend system register definition generation to handle Enum types
when defining shared register fields
* Generate definitions for new _EL2 registers and add new fields
for ID_AA64PFR1_EL1
* Allow SVE to be disabled separately from SME on the kernel
command-line
Tracing:
* Support for "direct calls" in ftrace, which enables BPF tracing
for arm64
Kdump:
* Don't bother unmapping the crashkernel from the linear mapping,
which then allows us to use huge (block) mappings and reduce
TLB pressure when a crashkernel is loaded.
Memory management:
* Try again to remove data cache invalidation from the coherent DMA
allocation path
* Simplify the fixmap code by mapping at page granularity
* Allow the kfence pool to be allocated early, preventing the rest
of the linear mapping from being forced to page granularity
Perf and PMU:
* Move CPU PMU code out to drivers/perf/ where it can be reused
by the 32-bit ARM architecture when running on ARMv8 CPUs
* Fix race between CPU PMU probing and pKVM host de-privilege
* Add support for Apple M2 CPU PMU
* Adjust the generic PERF_COUNT_HW_BRANCH_INSTRUCTIONS event
dynamically, depending on what the CPU actually supports
* Minor fixes and cleanups to system PMU drivers
Stack tracing:
* Use the XPACLRI instruction to strip PAC from pointers, rather
than rolling our own function in C
* Remove redundant PAC removal for toolchains that handle this in
their builtins
* Make backtracing more resilient in the face of instrumentation
Miscellaneous:
* Fix single-step with KGDB
* Remove harmless warning when 'nokaslr' is passed on the kernel
command-line
* Minor fixes and cleanups across the board
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmRChcwQHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNCgBCADFvkYY9ESztSnd3EpiMbbAzgRCQBiA5H7U
F2Wc+hIWgeAeUEttSH22+F16r6Jb0gbaDvsuhtN2W/rwQhKNbCU0MaUME05MPmg2
AOp+RZb2vdT5i5S5dC6ZM6G3T6u9O78LBWv2JWBdd6RIybamEn+RL00ep2WAduH7
n1FgTbsKgnbScD2qd4K1ejZ1W/BQMwYulkNpyTsmCIijXM12lkzFlxWnMtky3uhR
POpawcIZzXvWI02QAX+SIdynGChQV3VP+dh9GuFbt7ASigDEhgunvfUYhZNSaqf4
+/q0O8toCtmQJBUhF0DEDSB5T8SOz5v9CKxKuwfaX6Trq0ixFQpZ
=78L9
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
"ACPI:
- Improve error reporting when failing to manage SDEI on AGDI device
removal
Assembly routines:
- Improve register constraints so that the compiler can make use of
the zero register instead of moving an immediate #0 into a GPR
- Allow the compiler to allocate the registers used for CAS
instructions
CPU features and system registers:
- Cleanups to the way in which CPU features are identified from the
ID register fields
- Extend system register definition generation to handle Enum types
when defining shared register fields
- Generate definitions for new _EL2 registers and add new fields for
ID_AA64PFR1_EL1
- Allow SVE to be disabled separately from SME on the kernel
command-line
Tracing:
- Support for "direct calls" in ftrace, which enables BPF tracing for
arm64
Kdump:
- Don't bother unmapping the crashkernel from the linear mapping,
which then allows us to use huge (block) mappings and reduce TLB
pressure when a crashkernel is loaded.
Memory management:
- Try again to remove data cache invalidation from the coherent DMA
allocation path
- Simplify the fixmap code by mapping at page granularity
- Allow the kfence pool to be allocated early, preventing the rest of
the linear mapping from being forced to page granularity
Perf and PMU:
- Move CPU PMU code out to drivers/perf/ where it can be reused by
the 32-bit ARM architecture when running on ARMv8 CPUs
- Fix race between CPU PMU probing and pKVM host de-privilege
- Add support for Apple M2 CPU PMU
- Adjust the generic PERF_COUNT_HW_BRANCH_INSTRUCTIONS event
dynamically, depending on what the CPU actually supports
- Minor fixes and cleanups to system PMU drivers
Stack tracing:
- Use the XPACLRI instruction to strip PAC from pointers, rather than
rolling our own function in C
- Remove redundant PAC removal for toolchains that handle this in
their builtins
- Make backtracing more resilient in the face of instrumentation
Miscellaneous:
- Fix single-step with KGDB
- Remove harmless warning when 'nokaslr' is passed on the kernel
command-line
- Minor fixes and cleanups across the board"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (72 commits)
KVM: arm64: Ensure CPU PMU probes before pKVM host de-privilege
arm64: kexec: include reboot.h
arm64: delete dead code in this_cpu_set_vectors()
arm64/cpufeature: Use helper macro to specify ID register for capabilites
drivers/perf: hisi: add NULL check for name
drivers/perf: hisi: Remove redundant initialized of pmu->name
arm64/cpufeature: Consistently use symbolic constants for min_field_value
arm64/cpufeature: Pull out helper for CPUID register definitions
arm64/sysreg: Convert HFGITR_EL2 to automatic generation
ACPI: AGDI: Improve error reporting for problems during .remove()
arm64: kernel: Fix kernel warning when nokaslr is passed to commandline
perf/arm-cmn: Fix port detection for CMN-700
arm64: kgdb: Set PSTATE.SS to 1 to re-enable single-step
arm64: move PAC masks to <asm/pointer_auth.h>
arm64: use XPACLRI to strip PAC
arm64: avoid redundant PAC stripping in __builtin_return_address()
arm64/sme: Fix some comments of ARM SME
arm64/signal: Alloc tpidr2 sigframe after checking system_supports_tpidr2()
arm64/signal: Use system_supports_tpidr2() to check TPIDR2
arm64/idreg: Don't disable SME when disabling SVE
...
When allocations fails that can be NULL now.
If the name provided is NULL, then the initialization process of the PMU
type and dev will be skipped in function perf_pmu_register().
Consequently, the PMU will not be able to register into the kernel.
Moreover, in the case of unregister the PMU, the function device_del()
will need to handle NULL pointers, which potentially can cause issues.
So move this allocation above the cpuhp_state_add_instance() and directly
return if it does fail.
Signed-off-by: Junhao He <hejunhao3@huawei.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20230403081423.62460-3-hejunhao3@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
"pmu->name" is initialized by perf_pmu_register() function, so remove
the redundant initialized in hisi_pmu_init().
Signed-off-by: Junhao He <hejunhao3@huawei.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20230403081423.62460-2-hejunhao3@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
When the "extra device ports" configuration was first added, the
additional mxp_device_port_connect_info registers were added around the
existing mxp_mesh_port_connect_info registers. What I missed about
CMN-700 is that it shuffled them around to remove this discontinuity.
As such, tweak the definitions and factor out a helper for reading these
registers so we can deal with this discrepancy easily, which does at
least allow nicely tidying up the callsites. With this we can then also
do the nice thing and skip accesses completely rather than relying on
RES0 behaviour where we know the extra registers aren't defined.
Fixes: 23760a0144 ("perf/arm-cmn: Add CMN-700 support")
Reported-by: Jing Zhang <renyu.zj@linux.alibaba.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/71d129241d4d7923cde72a0e5b4c8d2f6084525f.1681295193.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
The mapping of perf_events generic hardware events to actual PMU events on
ARM PMUv3 may not always be correct. This is in particular true for the
PERF_COUNT_HW_BRANCH_INSTRUCTIONS event. Although the mapping points to an
architected event, it may not always be available. This can be seen with a
simple:
$ perf stat -e branches sleep 0
Performance counter stats for 'sleep 0':
<not supported> branches
0.001401081 seconds time elapsed
Yet the hardware does have an event that could be used for branches.
Dynamically check for a supported hardware event which can be used for
PERF_COUNT_HW_BRANCH_INSTRUCTIONS at mapping time.
And with that:
$ perf stat -e branches sleep 0
Performance counter stats for 'sleep 0':
166,739 branches
0.000832163 seconds time elapsed
Co-developed-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Stephane Eranian <eranian@google.com>
Co-developed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Co-developed-by: Peter Newman <peternewman@google.com>
Signed-off-by: Peter Newman <peternewman@google.com>
Link: https://lore.kernel.org/all/YvunKCJHSXKz%2FkZB@FVFF77S0Q05N
Link: https://lore.kernel.org/r/20230411093809.657501-1-peternewman@google.com
Signed-off-by: Will Deacon <will@kernel.org>
DTC cycle count events don't have anything to validate or initialise in
themselves, but we should not forget to still validate their whole group
context. Otherwise, we may fail to correctly reject a contrived group
containing an impossible number of cycles events.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/3124e8c276a1f513c1a415dc839ca4181b3c8bc8.1680522545.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Commit "perf/amlogic: resolve conflict between canvas & pmu"
changed the base address.
Fixes: 2016e2113d ("perf/amlogic: Add support for Amlogic meson G12 SoC DDR PMU driver")
Signed-off-by: Marc Gonzalez <mgonzalez@freebox.fr>
Acked-by: Will Deacon <will@kernel.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230327120932.2158389-4-mgonzalez@freebox.fr
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
The PMU itself is compatible with the one found on M1. We still know
next to nothing about the counters so keep using CPU uarch specific
compatibles/PMU names.
Signed-off-by: Janne Grunau <j@jannau.net>
Acked-by: Mark Rutland <mark.rutland@arm.com.
Reviewed-by: Hector Martin <marcan@marcan.st>
Link: https://lore.kernel.org/r/20230214-apple_m2_pmu-v1-2-9c9213ab9b63@jannau.net
Signed-off-by: Will Deacon <will@kernel.org>
Convert platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exactly
what this function does.
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Reviewed-by: Shuai Xue <xueshuai@linux.alibaba.com>
Link: https://lore.kernel.org/r/20230216063403.9753-1-yang.lee@linux.alibaba.com
Signed-off-by: Will Deacon <will@kernel.org>
Since commit 8b41fc4454 ("kbuild: create modules.builtin without
Makefile.modbuiltin or tristate.conf"), MODULE_LICENSE declarations
are used to identify modules. As a consequence, uses of the macro
in non-modules will cause modprobe to misidentify their containing
object file as a module when it is not (false positives), and modprobe
might succeed rather than failing with a suitable error message.
So remove it in the files in this commit, none of which can be built as
modules.
Signed-off-by: Nick Alcock <nick.alcock@oracle.com>
Suggested-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: linux-modules@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: Hitomi Hasegawa <hasegawa-hitomi@fujitsu.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20230217141059.392471-9-nick.alcock@oracle.com
Signed-off-by: Will Deacon <will@kernel.org>
According to commit 890cc39a87 ("drivers: provide
devm_platform_get_and_ioremap_resource()"), convert
platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exactly
what this function does.
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Link: https://lore.kernel.org/r/20230315023108.36953-1-yang.lee@linux.alibaba.com
Signed-off-by: Will Deacon <will@kernel.org>
According to commit 890cc39a87 ("drivers: provide
devm_platform_get_and_ioremap_resource()"), convert
platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exactly
what this function does.
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Link: https://lore.kernel.org/r/20230315023017.35789-1-yang.lee@linux.alibaba.com
Signed-off-by: Will Deacon <will@kernel.org>
As eventid field was expanded to support new mesh versions, it started to
overlap with wp_combine field. Move wp_combine to fix the issue.
Fixes: 23760a0144 ("perf/arm-cmn: Add CMN-700 support")
Signed-off-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Link: https://lore.kernel.org/r/20230301175540.19891-1-ilkka@os.amperecomputing.com
Signed-off-by: Will Deacon <will@kernel.org>
The only thing stopping the PMUv3 driver from compiling on 32bit
is the lack of defined system registers names and the handful of
required helpers.
This is easily solved by providing the sysreg accessors and updating
the Kconfig entry.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Co-developed-by: Zaid Al-Bassam <zalbassam@google.com>
Signed-off-by: Zaid Al-Bassam <zalbassam@google.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20230317195027.3746949-8-zalbassam@google.com
Signed-off-by: Will Deacon <will@kernel.org>
GENMASK macro uses "unsigned long" (32-bit wide on arm and 64-bit
on arm64), This causes build issues when enabling PMUv3 on arm as
it tries to access bits > 31. This patch switches the GENMASK to
GENMASK_ULL, which uses "unsigned long long" (64-bit on both arm
and arm64).
Signed-off-by: Zaid Al-Bassam <zalbassam@google.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20230317195027.3746949-6-zalbassam@google.com
Signed-off-by: Will Deacon <will@kernel.org>
KVM host support is available only on arm64.
By moving the inclusion of kvm_host.h to an arm64-specific file,
the 32bit architecture will be able to implement dummy helpers.
Signed-off-by: Zaid Al-Bassam <zalbassam@google.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20230317195027.3746949-5-zalbassam@google.com
Signed-off-by: Will Deacon <will@kernel.org>
The current PMU version definitions are available for arm64 only,
As we want to add PMUv3 support to arm (32-bit), abstracts
these definitions by using arch-specific helpers.
Signed-off-by: Zaid Al-Bassam <zalbassam@google.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20230317195027.3746949-4-zalbassam@google.com
Signed-off-by: Will Deacon <will@kernel.org>
As we want to enable 32bit support, we need to distanciate the
PMUv3 driver from the AArch64 system register names.
This patch moves all system register accesses to an architecture
specific include file, allowing the 32bit counterpart to be
slotted in at a later time.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Co-developed-by: Zaid Al-Bassam <zalbassam@google.com>
Signed-off-by: Zaid Al-Bassam <zalbassam@google.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20230317195027.3746949-3-zalbassam@google.com
Signed-off-by: Will Deacon <will@kernel.org>
Having the ARM PMUv3 driver sitting in arch/arm64/kernel is getting
in the way of being able to use perf on ARMv8 cores running a 32bit
kernel, such as 32bit KVM guests.
This patch moves it into drivers/perf/arm_pmuv3.c, with an include
file in include/linux/perf/arm_pmuv3.h. The only thing left in
arch/arm64 is some mundane perf stuff.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Zaid Al-Bassam <zalbassam@google.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20230317195027.3746949-2-zalbassam@google.com
Signed-off-by: Will Deacon <will@kernel.org>
* Some cleanups and fixes for the Zbb-optimized string routines.
* Support for custom (vendor or implementation defined) perf events.
* COMMAND_LINE_SIZE has been increased to 1024.
-----BEGIN PGP SIGNATURE-----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=68ZK
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-6.3-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull more RISC-V updates from Palmer Dabbelt:
- Some cleanups and fixes for the Zbb-optimized string routines
- Support for custom (vendor or implementation defined) perf events
- COMMAND_LINE_SIZE has been increased to 1024
* tag 'riscv-for-linus-6.3-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Bump COMMAND_LINE_SIZE value to 1024
drivers/perf: RISC-V: Allow programming custom firmware events
riscv, lib: Fix Zbb strncmp
RISC-V: improve string-function assembly
Applications need to be able to program the SBI implementation specific
or custom firmware events in addition to the standard firmware events.
Remove a check in the driver that prohibits the programming of the custom
firmware events.
Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20230208074314.3661406-1-mchitale@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
- Provide a virtual cache topology to the guest to avoid
inconsistencies with migration on heterogenous systems. Non secure
software has no practical need to traverse the caches by set/way in
the first place.
- Add support for taking stage-2 access faults in parallel. This was an
accidental omission in the original parallel faults implementation,
but should provide a marginal improvement to machines w/o FEAT_HAFDBS
(such as hardware from the fruit company).
- A preamble to adding support for nested virtualization to KVM,
including vEL2 register state, rudimentary nested exception handling
and masking unsupported features for nested guests.
- Fixes to the PSCI relay that avoid an unexpected host SVE trap when
resuming a CPU when running pKVM.
- VGIC maintenance interrupt support for the AIC
- Improvements to the arch timer emulation, primarily aimed at reducing
the trap overhead of running nested.
- Add CONFIG_USERFAULTFD to the KVM selftests config fragment in the
interest of CI systems.
- Avoid VM-wide stop-the-world operations when a vCPU accesses its own
redistributor.
- Serialize when toggling CPACR_EL1.SMEN to avoid unexpected exceptions
in the host.
- Aesthetic and comment/kerneldoc fixes
- Drop the vestiges of the old Columbia mailing list and add [Oliver]
as co-maintainer
This also drags in arm64's 'for-next/sme2' branch, because both it and
the PSCI relay changes touch the EL2 initialization code.
RISC-V:
- Fix wrong usage of PGDIR_SIZE instead of PUD_SIZE
- Correctly place the guest in S-mode after redirecting a trap to the guest
- Redirect illegal instruction traps to guest
- SBI PMU support for guest
s390:
- Two patches sorting out confusion between virtual and physical
addresses, which currently are the same on s390.
- A new ioctl that performs cmpxchg on guest memory
- A few fixes
x86:
- Change tdp_mmu to a read-only parameter
- Separate TDP and shadow MMU page fault paths
- Enable Hyper-V invariant TSC control
- Fix a variety of APICv and AVIC bugs, some of them real-world,
some of them affecting architecurally legal but unlikely to
happen in practice
- Mark APIC timer as expired if its in one-shot mode and the count
underflows while the vCPU task was being migrated
- Advertise support for Intel's new fast REP string features
- Fix a double-shootdown issue in the emergency reboot code
- Ensure GIF=1 and disable SVM during an emergency reboot, i.e. give SVM
similar treatment to VMX
- Update Xen's TSC info CPUID sub-leaves as appropriate
- Add support for Hyper-V's extended hypercalls, where "support" at this
point is just forwarding the hypercalls to userspace
- Clean up the kvm->lock vs. kvm->srcu sequences when updating the PMU and
MSR filters
- One-off fixes and cleanups
- Fix and cleanup the range-based TLB flushing code, used when KVM is
running on Hyper-V
- Add support for filtering PMU events using a mask. If userspace
wants to restrict heavily what events the guest can use, it can now
do so without needing an absurd number of filter entries
- Clean up KVM's handling of "PMU MSRs to save", especially when vPMU
support is disabled
- Add PEBS support for Intel Sapphire Rapids
- Fix a mostly benign overflow bug in SEV's send|receive_update_data()
- Move several SVM-specific flags into vcpu_svm
x86 Intel:
- Handle NMI VM-Exits before leaving the noinstr region
- A few trivial cleanups in the VM-Enter flows
- Stop enabling VMFUNC for L1 purely to document that KVM doesn't support
EPTP switching (or any other VM function) for L1
- Fix a crash when using eVMCS's enlighted MSR bitmaps
Generic:
- Clean up the hardware enable and initialization flow, which was
scattered around multiple arch-specific hooks. Instead, just
let the arch code call into generic code. Both x86 and ARM should
benefit from not having to fight common KVM code's notion of how
to do initialization.
- Account allocations in generic kvm_arch_alloc_vm()
- Fix a memory leak if coalesced MMIO unregistration fails
selftests:
- On x86, cache the CPU vendor (AMD vs. Intel) and use the info to emit
the correct hypercall instruction instead of relying on KVM to patch
in VMMCALL
- Use TAP interface for kvm_binary_stats_test and tsc_msrs_test
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmP2YA0UHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroPg/Qf+J6nT+TkIa+8Ei+fN1oMTDp4YuIOx
mXvJ9mRK9sQ+tAUVwvDz3qN/fK5mjsYbRHIDlVc5p2Q3bCrVGDDqXPFfCcLx1u+O
9U9xjkO4JxD2LS9pc70FYOyzVNeJ8VMGOBbC2b0lkdYZ4KnUc6e/WWFKJs96bK+H
duo+RIVyaMthnvbTwSv1K3qQb61n6lSJXplywS8KWFK6NZAmBiEFDAWGRYQE9lLs
VcVcG0iDJNL/BQJ5InKCcvXVGskcCm9erDszPo7w4Bypa4S9AMS42DHUaRZrBJwV
/WqdH7ckIz7+OSV0W1j+bKTHAFVTCjXYOM7wQykgjawjICzMSnnG9Gpskw==
=goe1
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"ARM:
- Provide a virtual cache topology to the guest to avoid
inconsistencies with migration on heterogenous systems. Non secure
software has no practical need to traverse the caches by set/way in
the first place
- Add support for taking stage-2 access faults in parallel. This was
an accidental omission in the original parallel faults
implementation, but should provide a marginal improvement to
machines w/o FEAT_HAFDBS (such as hardware from the fruit company)
- A preamble to adding support for nested virtualization to KVM,
including vEL2 register state, rudimentary nested exception
handling and masking unsupported features for nested guests
- Fixes to the PSCI relay that avoid an unexpected host SVE trap when
resuming a CPU when running pKVM
- VGIC maintenance interrupt support for the AIC
- Improvements to the arch timer emulation, primarily aimed at
reducing the trap overhead of running nested
- Add CONFIG_USERFAULTFD to the KVM selftests config fragment in the
interest of CI systems
- Avoid VM-wide stop-the-world operations when a vCPU accesses its
own redistributor
- Serialize when toggling CPACR_EL1.SMEN to avoid unexpected
exceptions in the host
- Aesthetic and comment/kerneldoc fixes
- Drop the vestiges of the old Columbia mailing list and add [Oliver]
as co-maintainer
RISC-V:
- Fix wrong usage of PGDIR_SIZE instead of PUD_SIZE
- Correctly place the guest in S-mode after redirecting a trap to the
guest
- Redirect illegal instruction traps to guest
- SBI PMU support for guest
s390:
- Sort out confusion between virtual and physical addresses, which
currently are the same on s390
- A new ioctl that performs cmpxchg on guest memory
- A few fixes
x86:
- Change tdp_mmu to a read-only parameter
- Separate TDP and shadow MMU page fault paths
- Enable Hyper-V invariant TSC control
- Fix a variety of APICv and AVIC bugs, some of them real-world, some
of them affecting architecurally legal but unlikely to happen in
practice
- Mark APIC timer as expired if its in one-shot mode and the count
underflows while the vCPU task was being migrated
- Advertise support for Intel's new fast REP string features
- Fix a double-shootdown issue in the emergency reboot code
- Ensure GIF=1 and disable SVM during an emergency reboot, i.e. give
SVM similar treatment to VMX
- Update Xen's TSC info CPUID sub-leaves as appropriate
- Add support for Hyper-V's extended hypercalls, where "support" at
this point is just forwarding the hypercalls to userspace
- Clean up the kvm->lock vs. kvm->srcu sequences when updating the
PMU and MSR filters
- One-off fixes and cleanups
- Fix and cleanup the range-based TLB flushing code, used when KVM is
running on Hyper-V
- Add support for filtering PMU events using a mask. If userspace
wants to restrict heavily what events the guest can use, it can now
do so without needing an absurd number of filter entries
- Clean up KVM's handling of "PMU MSRs to save", especially when vPMU
support is disabled
- Add PEBS support for Intel Sapphire Rapids
- Fix a mostly benign overflow bug in SEV's
send|receive_update_data()
- Move several SVM-specific flags into vcpu_svm
x86 Intel:
- Handle NMI VM-Exits before leaving the noinstr region
- A few trivial cleanups in the VM-Enter flows
- Stop enabling VMFUNC for L1 purely to document that KVM doesn't
support EPTP switching (or any other VM function) for L1
- Fix a crash when using eVMCS's enlighted MSR bitmaps
Generic:
- Clean up the hardware enable and initialization flow, which was
scattered around multiple arch-specific hooks. Instead, just let
the arch code call into generic code. Both x86 and ARM should
benefit from not having to fight common KVM code's notion of how to
do initialization
- Account allocations in generic kvm_arch_alloc_vm()
- Fix a memory leak if coalesced MMIO unregistration fails
selftests:
- On x86, cache the CPU vendor (AMD vs. Intel) and use the info to
emit the correct hypercall instruction instead of relying on KVM to
patch in VMMCALL
- Use TAP interface for kvm_binary_stats_test and tsc_msrs_test"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (325 commits)
KVM: SVM: hyper-v: placate modpost section mismatch error
KVM: x86/mmu: Make tdp_mmu_allowed static
KVM: arm64: nv: Use reg_to_encoding() to get sysreg ID
KVM: arm64: nv: Only toggle cache for virtual EL2 when SCTLR_EL2 changes
KVM: arm64: nv: Filter out unsupported features from ID regs
KVM: arm64: nv: Emulate EL12 register accesses from the virtual EL2
KVM: arm64: nv: Allow a sysreg to be hidden from userspace only
KVM: arm64: nv: Emulate PSTATE.M for a guest hypervisor
KVM: arm64: nv: Add accessors for SPSR_EL1, ELR_EL1 and VBAR_EL1 from virtual EL2
KVM: arm64: nv: Handle SMCs taken from virtual EL2
KVM: arm64: nv: Handle trapped ERET from virtual EL2
KVM: arm64: nv: Inject HVC exceptions to the virtual EL2
KVM: arm64: nv: Support virtual EL2 exceptions
KVM: arm64: nv: Handle HCR_EL2.NV system register traps
KVM: arm64: nv: Add nested virt VCPU primitives for vEL2 VCPU state
KVM: arm64: nv: Add EL2 system registers to vcpu context
KVM: arm64: nv: Allow userspace to set PSR_MODE_EL2x
KVM: arm64: nv: Reset VCPU to EL2 registers if VCPU nested virt is set
KVM: arm64: nv: Introduce nested virtualization VCPU feature
KVM: arm64: Use the S2 MMU context to iterate over S2 table
...
