[ Upstream commit ff612ba784 ]
We've been seeing the following sporadically throughout our fleet
panic: kernel BUG at fs/btrfs/relocation.c:4584!
netversion: 5.0-0
Backtrace:
#0 [ffffc90003adb880] machine_kexec at ffffffff81041da8
#1 [ffffc90003adb8c8] __crash_kexec at ffffffff8110396c
#2 [ffffc90003adb988] crash_kexec at ffffffff811048ad
#3 [ffffc90003adb9a0] oops_end at ffffffff8101c19a
#4 [ffffc90003adb9c0] do_trap at ffffffff81019114
#5 [ffffc90003adba00] do_error_trap at ffffffff810195d0
#6 [ffffc90003adbab0] invalid_op at ffffffff81a00a9b
[exception RIP: btrfs_reloc_cow_block+692]
RIP: ffffffff8143b614 RSP: ffffc90003adbb68 RFLAGS: 00010246
RAX: fffffffffffffff7 RBX: ffff8806b9c32000 RCX: ffff8806aad00690
RDX: ffff880850b295e0 RSI: ffff8806b9c32000 RDI: ffff88084f205bd0
RBP: ffff880849415000 R8: ffffc90003adbbe0 R9: ffff88085ac90000
R10: ffff8805f7369140 R11: 0000000000000000 R12: ffff880850b295e0
R13: ffff88084f205bd0 R14: 0000000000000000 R15: 0000000000000000
ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018
#7 [ffffc90003adbbb0] __btrfs_cow_block at ffffffff813bf1cd
#8 [ffffc90003adbc28] btrfs_cow_block at ffffffff813bf4b3
#9 [ffffc90003adbc78] btrfs_search_slot at ffffffff813c2e6c
The way relocation moves data extents is by creating a reloc inode and
preallocating extents in this inode and then copying the data into these
preallocated extents. Once we've done this for all of our extents,
we'll write out these dirty pages, which marks the extent written, and
goes into btrfs_reloc_cow_block(). From here we get our current
reloc_control, which _should_ match the reloc_control for the current
block group we're relocating.
However if we get an ENOSPC in this path at some point we'll bail out,
never initiating writeback on this inode. Not a huge deal, unless we
happen to be doing relocation on a different block group, and this block
group is now rc->stage == UPDATE_DATA_PTRS. This trips the BUG_ON() in
btrfs_reloc_cow_block(), because we expect to be done modifying the data
inode. We are in fact done modifying the metadata for the data inode
we're currently using, but not the one from the failed block group, and
thus we BUG_ON().
(This happens when writeback finishes for extents from the previous
group, when we are at btrfs_finish_ordered_io() which updates the data
reloc tree (inode item, drops/adds extent items, etc).)
Fix this by writing out the reloc data inode always, and then breaking
out of the loop after that point to keep from tripping this BUG_ON()
later.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
[ add note from Filipe ]
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 39ad317315 ]
When doing fallocate, we first add the range to the reserve_list and
then reserve the quota. If quota reservation fails, we'll release all
reserved parts of reserve_list.
However, cur_offset is not updated to indicate that this range is
already been inserted into the list. Therefore, the same range is freed
twice. Once at list_for_each_entry loop, and once at the end of the
function. This will result in WARN_ON on bytes_may_use when we free the
remaining space.
At the end, under the 'out' label we have a call to:
btrfs_free_reserved_data_space(inode, data_reserved, alloc_start, alloc_end - cur_offset);
The start offset, third argument, should be cur_offset.
Everything from alloc_start to cur_offset was freed by the
list_for_each_entry_safe_loop.
Fixes: 18513091af ("btrfs: update btrfs_space_info's bytes_may_use timely")
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Robbie Ko <robbieko@synology.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
This reverts commit 8b13bb911f.
There is currently no corresponding patch in master due to additional
changes that would be significantly different from plain revert in the
respective stable branch.
The range argument was not handled correctly and could cause trim to
overlap allocated areas or reach beyond the end of the device. The
address space that fitrim normally operates on is in logical
coordinates, while the discards are done on the physical device extents.
This distinction cannot be made with the current ioctl interface and
caused the confusion.
The bug depends on the layout of block groups and does not always
happen. The whole-fs trim (run by default by the fstrim tool) is not
affected.
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 38e3eebff6 upstream.
Qgroups will do the old roots lookup at delayed ref time, which could be
while walking down the extent root while running a delayed ref. This
should be fine, except we specifically lock eb's in the backref walking
code irrespective of path->skip_locking, which deadlocks the system.
Fix up the backref code to honor path->skip_locking, nobody will be
modifying the commit_root when we're searching so it's completely safe
to do.
This happens since fb235dc06f ("btrfs: qgroup: Move half of the qgroup
accounting time out of commit trans"), kernel may lockup with quota
enabled.
There is one backref trace triggered by snapshot dropping along with
write operation in the source subvolume. The example can be reliably
reproduced:
btrfs-cleaner D 0 4062 2 0x80000000
Call Trace:
schedule+0x32/0x90
btrfs_tree_read_lock+0x93/0x130 [btrfs]
find_parent_nodes+0x29b/0x1170 [btrfs]
btrfs_find_all_roots_safe+0xa8/0x120 [btrfs]
btrfs_find_all_roots+0x57/0x70 [btrfs]
btrfs_qgroup_trace_extent_post+0x37/0x70 [btrfs]
btrfs_qgroup_trace_leaf_items+0x10b/0x140 [btrfs]
btrfs_qgroup_trace_subtree+0xc8/0xe0 [btrfs]
do_walk_down+0x541/0x5e3 [btrfs]
walk_down_tree+0xab/0xe7 [btrfs]
btrfs_drop_snapshot+0x356/0x71a [btrfs]
btrfs_clean_one_deleted_snapshot+0xb8/0xf0 [btrfs]
cleaner_kthread+0x12b/0x160 [btrfs]
kthread+0x112/0x130
ret_from_fork+0x27/0x50
When dropping snapshots with qgroup enabled, we will trigger backref
walk.
However such backref walk at that timing is pretty dangerous, as if one
of the parent nodes get WRITE locked by other thread, we could cause a
dead lock.
For example:
FS 260 FS 261 (Dropped)
node A node B
/ \ / \
node C node D node E
/ \ / \ / \
leaf F|leaf G|leaf H|leaf I|leaf J|leaf K
The lock sequence would be:
Thread A (cleaner) | Thread B (other writer)
-----------------------------------------------------------------------
write_lock(B) |
write_lock(D) |
^^^ called by walk_down_tree() |
| write_lock(A)
| write_lock(D) << Stall
read_lock(H) << for backref walk |
read_lock(D) << lock owner is |
the same thread A |
so read lock is OK |
read_lock(A) << Stall |
So thread A hold write lock D, and needs read lock A to unlock.
While thread B holds write lock A, while needs lock D to unlock.
This will cause a deadlock.
This is not only limited to snapshot dropping case. As the backref
walk, even only happens on commit trees, is breaking the normal top-down
locking order, makes it deadlock prone.
Fixes: fb235dc06f ("btrfs: qgroup: Move half of the qgroup accounting time out of commit trans")
CC: stable@vger.kernel.org # 4.14+
Reported-and-tested-by: David Sterba <dsterba@suse.com>
Reported-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
[ rebase to latest branch and fix lock assert bug in btrfs/007 ]
[ backport to linux-4.19.y branch, solve minor conflicts ]
Signed-off-by: Qu Wenruo <wqu@suse.com>
[ copy logs and deadlock analysis from Qu's patch ]
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e32773357d upstream.
A failed call to kobject_init_and_add() must be followed by a call to
kobject_put(). Currently in the error path when adding fs_devices we
are missing this call. This could be fixed by calling
btrfs_sysfs_remove_fsid() if btrfs_sysfs_add_fsid() returns an error or
by adding a call to kobject_put() directly in btrfs_sysfs_add_fsid().
Here we choose the second option because it prevents the slightly
unusual error path handling requirements of kobject from leaking out
into btrfs functions.
Add a call to kobject_put() in the error path of kobject_add_and_init().
This causes the release method to be called if kobject_init_and_add()
fails. open_tree() is the function that calls btrfs_sysfs_add_fsid()
and the error code in this function is already written with the
assumption that the release method is called during the error path of
open_tree() (as seen by the call to btrfs_sysfs_remove_fsid() under the
fail_fsdev_sysfs label).
Cc: stable@vger.kernel.org # v4.4+
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Tobin C. Harding <tobin@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 450ff83488 upstream.
If a call to kobject_init_and_add() fails we must call kobject_put()
otherwise we leak memory.
Calling kobject_put() when kobject_init_and_add() fails drops the
refcount back to 0 and calls the ktype release method (which in turn
calls the percpu destroy and kfree).
Add call to kobject_put() in the error path of call to
kobject_init_and_add().
Cc: stable@vger.kernel.org # v4.4+
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Tobin C. Harding <tobin@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0c713cbab6 upstream.
When we do a full fsync (the bit BTRFS_INODE_NEEDS_FULL_SYNC is set in the
inode) that happens to be ranged, which happens during a msync() or writes
for files opened with O_SYNC for example, we can end up with a corrupt log,
due to different file extent items representing ranges that overlap with
each other, or hit some assertion failures.
When doing a ranged fsync we only flush delalloc and wait for ordered
exents within that range. If while we are logging items from our inode
ordered extents for adjacent ranges complete, we end up in a race that can
make us insert the file extent items that overlap with others we logged
previously and the assertion failures.
For example, if tree-log.c:copy_items() receives a leaf that has the
following file extents items, all with a length of 4K and therefore there
is an implicit hole in the range 68K to 72K - 1:
(257 EXTENT_ITEM 64K), (257 EXTENT_ITEM 72K), (257 EXTENT_ITEM 76K), ...
It copies them to the log tree. However due to the need to detect implicit
holes, it may release the path, in order to look at the previous leaf to
detect an implicit hole, and then later it will search again in the tree
for the first file extent item key, with the goal of locking again the
leaf (which might have changed due to concurrent changes to other inodes).
However when it locks again the leaf containing the first key, the key
corresponding to the extent at offset 72K may not be there anymore since
there is an ordered extent for that range that is finishing (that is,
somewhere in the middle of btrfs_finish_ordered_io()), and it just
removed the file extent item but has not yet replaced it with a new file
extent item, so the part of copy_items() that does hole detection will
decide that there is a hole in the range starting from 68K to 76K - 1,
and therefore insert a file extent item to represent that hole, having
a key offset of 68K. After that we now have a log tree with 2 different
extent items that have overlapping ranges:
1) The file extent item copied before copy_items() released the path,
which has a key offset of 72K and a length of 4K, representing the
file range 72K to 76K - 1.
2) And a file extent item representing a hole that has a key offset of
68K and a length of 8K, representing the range 68K to 76K - 1. This
item was inserted after releasing the path, and overlaps with the
extent item inserted before.
The overlapping extent items can cause all sorts of unpredictable and
incorrect behaviour, either when replayed or if a fast (non full) fsync
happens later, which can trigger a BUG_ON() when calling
btrfs_set_item_key_safe() through __btrfs_drop_extents(), producing a
trace like the following:
[61666.783269] ------------[ cut here ]------------
[61666.783943] kernel BUG at fs/btrfs/ctree.c:3182!
[61666.784644] invalid opcode: 0000 [#1] PREEMPT SMP
(...)
[61666.786253] task: ffff880117b88c40 task.stack: ffffc90008168000
[61666.786253] RIP: 0010:btrfs_set_item_key_safe+0x7c/0xd2 [btrfs]
[61666.786253] RSP: 0018:ffffc9000816b958 EFLAGS: 00010246
[61666.786253] RAX: 0000000000000000 RBX: 000000000000000f RCX: 0000000000030000
[61666.786253] RDX: 0000000000000000 RSI: ffffc9000816ba4f RDI: ffffc9000816b937
[61666.786253] RBP: ffffc9000816b998 R08: ffff88011dae2428 R09: 0000000000001000
[61666.786253] R10: 0000160000000000 R11: 6db6db6db6db6db7 R12: ffff88011dae2418
[61666.786253] R13: ffffc9000816ba4f R14: ffff8801e10c4118 R15: ffff8801e715c000
[61666.786253] FS: 00007f6060a18700(0000) GS:ffff88023f5c0000(0000) knlGS:0000000000000000
[61666.786253] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[61666.786253] CR2: 00007f6060a28000 CR3: 0000000213e69000 CR4: 00000000000006e0
[61666.786253] Call Trace:
[61666.786253] __btrfs_drop_extents+0x5e3/0xaad [btrfs]
[61666.786253] ? time_hardirqs_on+0x9/0x14
[61666.786253] btrfs_log_changed_extents+0x294/0x4e0 [btrfs]
[61666.786253] ? release_extent_buffer+0x38/0xb4 [btrfs]
[61666.786253] btrfs_log_inode+0xb6e/0xcdc [btrfs]
[61666.786253] ? lock_acquire+0x131/0x1c5
[61666.786253] ? btrfs_log_inode_parent+0xee/0x659 [btrfs]
[61666.786253] ? arch_local_irq_save+0x9/0xc
[61666.786253] ? btrfs_log_inode_parent+0x1f5/0x659 [btrfs]
[61666.786253] btrfs_log_inode_parent+0x223/0x659 [btrfs]
[61666.786253] ? arch_local_irq_save+0x9/0xc
[61666.786253] ? lockref_get_not_zero+0x2c/0x34
[61666.786253] ? rcu_read_unlock+0x3e/0x5d
[61666.786253] btrfs_log_dentry_safe+0x60/0x7b [btrfs]
[61666.786253] btrfs_sync_file+0x317/0x42c [btrfs]
[61666.786253] vfs_fsync_range+0x8c/0x9e
[61666.786253] SyS_msync+0x13c/0x1c9
[61666.786253] entry_SYSCALL_64_fastpath+0x18/0xad
A sample of a corrupt log tree leaf with overlapping extents I got from
running btrfs/072:
item 14 key (295 108 200704) itemoff 2599 itemsize 53
extent data disk bytenr 0 nr 0
extent data offset 0 nr 458752 ram 458752
item 15 key (295 108 659456) itemoff 2546 itemsize 53
extent data disk bytenr 4343541760 nr 770048
extent data offset 606208 nr 163840 ram 770048
item 16 key (295 108 663552) itemoff 2493 itemsize 53
extent data disk bytenr 4343541760 nr 770048
extent data offset 610304 nr 155648 ram 770048
item 17 key (295 108 819200) itemoff 2440 itemsize 53
extent data disk bytenr 4334788608 nr 4096
extent data offset 0 nr 4096 ram 4096
The file extent item at offset 659456 (item 15) ends at offset 823296
(659456 + 163840) while the next file extent item (item 16) starts at
offset 663552.
Another different problem that the race can trigger is a failure in the
assertions at tree-log.c:copy_items(), which expect that the first file
extent item key we found before releasing the path exists after we have
released path and that the last key we found before releasing the path
also exists after releasing the path:
$ cat -n fs/btrfs/tree-log.c
4080 if (need_find_last_extent) {
4081 /* btrfs_prev_leaf could return 1 without releasing the path */
4082 btrfs_release_path(src_path);
4083 ret = btrfs_search_slot(NULL, inode->root, &first_key,
4084 src_path, 0, 0);
4085 if (ret < 0)
4086 return ret;
4087 ASSERT(ret == 0);
(...)
4103 if (i >= btrfs_header_nritems(src_path->nodes[0])) {
4104 ret = btrfs_next_leaf(inode->root, src_path);
4105 if (ret < 0)
4106 return ret;
4107 ASSERT(ret == 0);
4108 src = src_path->nodes[0];
4109 i = 0;
4110 need_find_last_extent = true;
4111 }
(...)
The second assertion implicitly expects that the last key before the path
release still exists, because the surrounding while loop only stops after
we have found that key. When this assertion fails it produces a stack like
this:
[139590.037075] assertion failed: ret == 0, file: fs/btrfs/tree-log.c, line: 4107
[139590.037406] ------------[ cut here ]------------
[139590.037707] kernel BUG at fs/btrfs/ctree.h:3546!
[139590.038034] invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC PTI
[139590.038340] CPU: 1 PID: 31841 Comm: fsstress Tainted: G W 5.0.0-btrfs-next-46 #1
(...)
[139590.039354] RIP: 0010:assfail.constprop.24+0x18/0x1a [btrfs]
(...)
[139590.040397] RSP: 0018:ffffa27f48f2b9b0 EFLAGS: 00010282
[139590.040730] RAX: 0000000000000041 RBX: ffff897c635d92c8 RCX: 0000000000000000
[139590.041105] RDX: 0000000000000000 RSI: ffff897d36a96868 RDI: ffff897d36a96868
[139590.041470] RBP: ffff897d1b9a0708 R08: 0000000000000000 R09: 0000000000000000
[139590.041815] R10: 0000000000000008 R11: 0000000000000000 R12: 0000000000000013
[139590.042159] R13: 0000000000000227 R14: ffff897cffcbba88 R15: 0000000000000001
[139590.042501] FS: 00007f2efc8dee80(0000) GS:ffff897d36a80000(0000) knlGS:0000000000000000
[139590.042847] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[139590.043199] CR2: 00007f8c064935e0 CR3: 0000000232252002 CR4: 00000000003606e0
[139590.043547] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[139590.043899] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[139590.044250] Call Trace:
[139590.044631] copy_items+0xa3f/0x1000 [btrfs]
[139590.045009] ? generic_bin_search.constprop.32+0x61/0x200 [btrfs]
[139590.045396] btrfs_log_inode+0x7b3/0xd70 [btrfs]
[139590.045773] btrfs_log_inode_parent+0x2b3/0xce0 [btrfs]
[139590.046143] ? do_raw_spin_unlock+0x49/0xc0
[139590.046510] btrfs_log_dentry_safe+0x4a/0x70 [btrfs]
[139590.046872] btrfs_sync_file+0x3b6/0x440 [btrfs]
[139590.047243] btrfs_file_write_iter+0x45b/0x5c0 [btrfs]
[139590.047592] __vfs_write+0x129/0x1c0
[139590.047932] vfs_write+0xc2/0x1b0
[139590.048270] ksys_write+0x55/0xc0
[139590.048608] do_syscall_64+0x60/0x1b0
[139590.048946] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[139590.049287] RIP: 0033:0x7f2efc4be190
(...)
[139590.050342] RSP: 002b:00007ffe743243a8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
[139590.050701] RAX: ffffffffffffffda RBX: 0000000000008d58 RCX: 00007f2efc4be190
[139590.051067] RDX: 0000000000008d58 RSI: 00005567eca0f370 RDI: 0000000000000003
[139590.051459] RBP: 0000000000000024 R08: 0000000000000003 R09: 0000000000008d60
[139590.051863] R10: 0000000000000078 R11: 0000000000000246 R12: 0000000000000003
[139590.052252] R13: 00000000003d3507 R14: 00005567eca0f370 R15: 0000000000000000
(...)
[139590.055128] ---[ end trace 193f35d0215cdeeb ]---
So fix this race between a full ranged fsync and writeback of adjacent
ranges by flushing all delalloc and waiting for all ordered extents to
complete before logging the inode. This is the simplest way to solve the
problem because currently the full fsync path does not deal with ranges
at all (it assumes a full range from 0 to LLONG_MAX) and it always needs
to look at adjacent ranges for hole detection. For use cases of ranged
fsyncs this can make a few fsyncs slower but on the other hand it can
make some following fsyncs to other ranges do less work or no need to do
anything at all. A full fsync is rare anyway and happens only once after
loading/creating an inode and once after less common operations such as a
shrinking truncate.
This is an issue that exists for a long time, and was often triggered by
generic/127, because it does mmap'ed writes and msync (which triggers a
ranged fsync). Adding support for the tree checker to detect overlapping
extents (next patch in the series) and trigger a WARN() when such cases
are found, and then calling btrfs_check_leaf_full() at the end of
btrfs_insert_file_extent() made the issue much easier to detect. Running
btrfs/072 with that change to the tree checker and making fsstress open
files always with O_SYNC made it much easier to trigger the issue (as
triggering it with generic/127 is very rare).
CC: stable@vger.kernel.org # 3.16+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ebb929060a upstream.
When we are doing a full fsync (bit BTRFS_INODE_NEEDS_FULL_SYNC set) of a
file that has holes and has file extent items spanning two or more leafs,
we can end up falling to back to a full transaction commit due to a logic
bug that leads to failure to insert a duplicate file extent item that is
meant to represent a hole between the last file extent item of a leaf and
the first file extent item in the next leaf. The failure (EEXIST error)
leads to a transaction commit (as most errors when logging an inode do).
For example, we have the two following leafs:
Leaf N:
-----------------------------------------------
| ..., ..., ..., (257, FILE_EXTENT_ITEM, 64K) |
-----------------------------------------------
The file extent item at the end of leaf N has a length of 4Kb,
representing the file range from 64K to 68K - 1.
Leaf N + 1:
-----------------------------------------------
| (257, FILE_EXTENT_ITEM, 72K), ..., ..., ... |
-----------------------------------------------
The file extent item at the first slot of leaf N + 1 has a length of
4Kb too, representing the file range from 72K to 76K - 1.
During the full fsync path, when we are at tree-log.c:copy_items() with
leaf N as a parameter, after processing the last file extent item, that
represents the extent at offset 64K, we take a look at the first file
extent item at the next leaf (leaf N + 1), and notice there's a 4K hole
between the two extents, and therefore we insert a file extent item
representing that hole, starting at file offset 68K and ending at offset
72K - 1. However we don't update the value of *last_extent, which is used
to represent the end offset (plus 1, non-inclusive end) of the last file
extent item inserted in the log, so it stays with a value of 68K and not
with a value of 72K.
Then, when copy_items() is called for leaf N + 1, because the value of
*last_extent is smaller then the offset of the first extent item in the
leaf (68K < 72K), we look at the last file extent item in the previous
leaf (leaf N) and see it there's a 4K gap between it and our first file
extent item (again, 68K < 72K), so we decide to insert a file extent item
representing the hole, starting at file offset 68K and ending at offset
72K - 1, this insertion will fail with -EEXIST being returned from
btrfs_insert_file_extent() because we already inserted a file extent item
representing a hole for this offset (68K) in the previous call to
copy_items(), when processing leaf N.
The -EEXIST error gets propagated to the fsync callback, btrfs_sync_file(),
which falls back to a full transaction commit.
Fix this by adjusting *last_extent after inserting a hole when we had to
look at the next leaf.
Fixes: 4ee3fad34a ("Btrfs: fix fsync after hole punching when using no-holes feature")
Cc: stable@vger.kernel.org # 4.14+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 72bd2323ec upstream.
Currently when we fail to COW a path at btrfs_update_root() we end up
always aborting the transaction. However all the current callers of
btrfs_update_root() are able to deal with errors returned from it, many do
end up aborting the transaction themselves (directly or not, such as the
transaction commit path), other BUG_ON() or just gracefully cancel whatever
they were doing.
When syncing the fsync log, we call btrfs_update_root() through
tree-log.c:update_log_root(), and if it returns an -ENOSPC error, the log
sync code does not abort the transaction, instead it gracefully handles
the error and returns -EAGAIN to the fsync handler, so that it falls back
to a transaction commit. Any other error different from -ENOSPC, makes the
log sync code abort the transaction.
So remove the transaction abort from btrfs_update_log() when we fail to
COW a path to update the root item, so that if an -ENOSPC failure happens
we avoid aborting the current transaction and have a chance of the fsync
succeeding after falling back to a transaction commit.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=203413
Fixes: 79787eaab4 ("btrfs: replace many BUG_ONs with proper error handling")
Cc: stable@vger.kernel.org # 4.4+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8fca955057 upstream.
If we have an error writing out a delalloc range in
btrfs_punch_hole_lock_range we'll unlock the inode and then goto
out_only_mutex, where we will again unlock the inode. This is bad,
don't do this.
Fixes: f27451f229 ("Btrfs: add support for fallocate's zero range operation")
CC: stable@vger.kernel.org # 4.19+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bfc61c3626 upstream.
When finding out which inodes have references on a particular extent, done
by backref.c:iterate_extent_inodes(), from the BTRFS_IOC_LOGICAL_INO (both
v1 and v2) ioctl and from scrub we use the transaction join API to grab a
reference on the currently running transaction, since in order to give
accurate results we need to inspect the delayed references of the currently
running transaction.
However, if there is currently no running transaction, the join operation
will create a new transaction. This is inefficient as the transaction will
eventually be committed, doing unnecessary IO and introducing a potential
point of failure that will lead to a transaction abort due to -ENOSPC, as
recently reported [1].
That's because the join, creates the transaction but does not reserve any
space, so when attempting to update the root item of the root passed to
btrfs_join_transaction(), during the transaction commit, we can end up
failling with -ENOSPC. Users of a join operation are supposed to actually
do some filesystem changes and reserve space by some means, which is not
the case of iterate_extent_inodes(), it is a read-only operation for all
contextes from which it is called.
The reported [1] -ENOSPC failure stack trace is the following:
heisenberg kernel: ------------[ cut here ]------------
heisenberg kernel: BTRFS: Transaction aborted (error -28)
heisenberg kernel: WARNING: CPU: 0 PID: 7137 at fs/btrfs/root-tree.c:136 btrfs_update_root+0x22b/0x320 [btrfs]
(...)
heisenberg kernel: CPU: 0 PID: 7137 Comm: btrfs-transacti Not tainted 4.19.0-4-amd64 #1 Debian 4.19.28-2
heisenberg kernel: Hardware name: FUJITSU LIFEBOOK U757/FJNB2A5, BIOS Version 1.21 03/19/2018
heisenberg kernel: RIP: 0010:btrfs_update_root+0x22b/0x320 [btrfs]
(...)
heisenberg kernel: RSP: 0018:ffffb5448828bd40 EFLAGS: 00010286
heisenberg kernel: RAX: 0000000000000000 RBX: ffff8ed56bccef50 RCX: 0000000000000006
heisenberg kernel: RDX: 0000000000000007 RSI: 0000000000000092 RDI: ffff8ed6bda166a0
heisenberg kernel: RBP: 00000000ffffffe4 R08: 00000000000003df R09: 0000000000000007
heisenberg kernel: R10: 0000000000000000 R11: 0000000000000001 R12: ffff8ed63396a078
heisenberg kernel: R13: ffff8ed092d7c800 R14: ffff8ed64f5db028 R15: ffff8ed6bd03d068
heisenberg kernel: FS: 0000000000000000(0000) GS:ffff8ed6bda00000(0000) knlGS:0000000000000000
heisenberg kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
heisenberg kernel: CR2: 00007f46f75f8000 CR3: 0000000310a0a002 CR4: 00000000003606f0
heisenberg kernel: DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
heisenberg kernel: DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
heisenberg kernel: Call Trace:
heisenberg kernel: commit_fs_roots+0x166/0x1d0 [btrfs]
heisenberg kernel: ? _cond_resched+0x15/0x30
heisenberg kernel: ? btrfs_run_delayed_refs+0xac/0x180 [btrfs]
heisenberg kernel: btrfs_commit_transaction+0x2bd/0x870 [btrfs]
heisenberg kernel: ? start_transaction+0x9d/0x3f0 [btrfs]
heisenberg kernel: transaction_kthread+0x147/0x180 [btrfs]
heisenberg kernel: ? btrfs_cleanup_transaction+0x530/0x530 [btrfs]
heisenberg kernel: kthread+0x112/0x130
heisenberg kernel: ? kthread_bind+0x30/0x30
heisenberg kernel: ret_from_fork+0x35/0x40
heisenberg kernel: ---[ end trace 05de912e30e012d9 ]---
So fix that by using the attach API, which does not create a transaction
when there is currently no running transaction.
[1] https://lore.kernel.org/linux-btrfs/b2a668d7124f1d3e410367f587926f622b3f03a4.camel@scientia.net/
Reported-by: Zygo Blaxell <ce3g8jdj@umail.furryterror.org>
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 03628cdbc6 upstream.
During fiemap, for regular extents (non inline) we need to check if they
are shared and if they are, set the shared bit. Checking if an extent is
shared requires checking the delayed references of the currently running
transaction, since some reference might have not yet hit the extent tree
and be only in the in-memory delayed references.
However we were using a transaction join for this, which creates a new
transaction when there is no transaction currently running. That means
that two more potential failures can happen: creating the transaction and
committing it. Further, if no write activity is currently happening in the
system, and fiemap calls keep being done, we end up creating and
committing transactions that do nothing.
In some extreme cases this can result in the commit of the transaction
created by fiemap to fail with ENOSPC when updating the root item of a
subvolume tree because a join does not reserve any space, leading to a
trace like the following:
heisenberg kernel: ------------[ cut here ]------------
heisenberg kernel: BTRFS: Transaction aborted (error -28)
heisenberg kernel: WARNING: CPU: 0 PID: 7137 at fs/btrfs/root-tree.c:136 btrfs_update_root+0x22b/0x320 [btrfs]
(...)
heisenberg kernel: CPU: 0 PID: 7137 Comm: btrfs-transacti Not tainted 4.19.0-4-amd64 #1 Debian 4.19.28-2
heisenberg kernel: Hardware name: FUJITSU LIFEBOOK U757/FJNB2A5, BIOS Version 1.21 03/19/2018
heisenberg kernel: RIP: 0010:btrfs_update_root+0x22b/0x320 [btrfs]
(...)
heisenberg kernel: RSP: 0018:ffffb5448828bd40 EFLAGS: 00010286
heisenberg kernel: RAX: 0000000000000000 RBX: ffff8ed56bccef50 RCX: 0000000000000006
heisenberg kernel: RDX: 0000000000000007 RSI: 0000000000000092 RDI: ffff8ed6bda166a0
heisenberg kernel: RBP: 00000000ffffffe4 R08: 00000000000003df R09: 0000000000000007
heisenberg kernel: R10: 0000000000000000 R11: 0000000000000001 R12: ffff8ed63396a078
heisenberg kernel: R13: ffff8ed092d7c800 R14: ffff8ed64f5db028 R15: ffff8ed6bd03d068
heisenberg kernel: FS: 0000000000000000(0000) GS:ffff8ed6bda00000(0000) knlGS:0000000000000000
heisenberg kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
heisenberg kernel: CR2: 00007f46f75f8000 CR3: 0000000310a0a002 CR4: 00000000003606f0
heisenberg kernel: DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
heisenberg kernel: DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
heisenberg kernel: Call Trace:
heisenberg kernel: commit_fs_roots+0x166/0x1d0 [btrfs]
heisenberg kernel: ? _cond_resched+0x15/0x30
heisenberg kernel: ? btrfs_run_delayed_refs+0xac/0x180 [btrfs]
heisenberg kernel: btrfs_commit_transaction+0x2bd/0x870 [btrfs]
heisenberg kernel: ? start_transaction+0x9d/0x3f0 [btrfs]
heisenberg kernel: transaction_kthread+0x147/0x180 [btrfs]
heisenberg kernel: ? btrfs_cleanup_transaction+0x530/0x530 [btrfs]
heisenberg kernel: kthread+0x112/0x130
heisenberg kernel: ? kthread_bind+0x30/0x30
heisenberg kernel: ret_from_fork+0x35/0x40
heisenberg kernel: ---[ end trace 05de912e30e012d9 ]---
Since fiemap (and btrfs_check_shared()) is a read-only operation, do not do
a transaction join to avoid the overhead of creating a new transaction (if
there is currently no running transaction) and introducing a potential
point of failure when the new transaction gets committed, instead use a
transaction attach to grab a handle for the currently running transaction
if any.
Reported-by: Christoph Anton Mitterer <calestyo@scientia.net>
Link: https://lore.kernel.org/linux-btrfs/b2a668d7124f1d3e410367f587926f622b3f03a4.camel@scientia.net/
Fixes: afce772e87 ("btrfs: fix check_shared for fiemap ioctl")
CC: stable@vger.kernel.org # 4.14+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9f89d5de86 upstream.
When we set a subvolume to read-only mode we do not flush dellaloc for any
of its inodes (except if the filesystem is mounted with -o flushoncommit),
since it does not affect correctness for any subsequent operations - except
for a future send operation. The send operation will not be able to see the
delalloc data since the respective file extent items, inode item updates,
backreferences, etc, have not hit yet the subvolume and extent trees.
Effectively this means data loss, since the send stream will not contain
any data from existing delalloc. Another problem from this is that if the
writeback starts and finishes while the send operation is in progress, we
have the subvolume tree being being modified concurrently which can result
in send failing unexpectedly with EIO or hitting runtime errors, assertion
failures or hitting BUG_ONs, etc.
Simple reproducer:
$ mkfs.btrfs -f /dev/sdb
$ mount /dev/sdb /mnt
$ btrfs subvolume create /mnt/sv
$ xfs_io -f -c "pwrite -S 0xea 0 108K" /mnt/sv/foo
$ btrfs property set /mnt/sv ro true
$ btrfs send -f /tmp/send.stream /mnt/sv
$ od -t x1 -A d /mnt/sv/foo
0000000 ea ea ea ea ea ea ea ea ea ea ea ea ea ea ea ea
*
0110592
$ umount /mnt
$ mkfs.btrfs -f /dev/sdc
$ mount /dev/sdc /mnt
$ btrfs receive -f /tmp/send.stream /mnt
$ echo $?
0
$ od -t x1 -A d /mnt/sv/foo
0000000
# ---> empty file
Since this a problem that affects send only, fix it in send by flushing
dellaloc for all the roots used by the send operation before send starts
to process the commit roots.
This is a problem that affects send since it was introduced (commit
31db9f7c23 ("Btrfs: introduce BTRFS_IOC_SEND for btrfs send/receive"))
but backporting it to older kernels has some dependencies:
- For kernels between 3.19 and 4.20, it depends on commit 3cd24c6980
("btrfs: use tagged writepage to mitigate livelock of snapshot") because
the function btrfs_start_delalloc_snapshot() does not exist before that
commit. So one has to either pick that commit or replace the calls to
btrfs_start_delalloc_snapshot() in this patch with calls to
btrfs_start_delalloc_inodes().
- For kernels older than 3.19 it also requires commit e5fa8f865b
("Btrfs: ensure send always works on roots without orphans") because
it depends on the function ensure_commit_roots_uptodate() which that
commits introduced.
- No dependencies for 5.0+ kernels.
A test case for fstests follows soon.
CC: stable@vger.kernel.org # 3.19+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c2d1b3aae3 upstream.
Up until now trimming the freespace was done irrespective of what the
arguments of the FITRIM ioctl were. For example fstrim's -o/-l arguments
will be entirely ignored. Fix it by correctly handling those paramter.
This requires breaking if the found freespace extent is after the end of
the passed range as well as completing trim after trimming
fstrim_range::len bytes.
Fixes: 499f377f49 ("btrfs: iterate over unused chunk space in FITRIM")
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 537f38f019 upstream.
If a an eb fails to be read for whatever reason - it's corrupted on disk
and parent transid/key validations fail or IO for eb pages fail then
this buffer must be removed from the buffer cache. Currently the code
calls free_extent_buffer if an error occurs. Unfortunately this doesn't
achieve the desired behavior since btrfs_find_create_tree_block returns
with eb->refs == 2.
On the other hand free_extent_buffer will only decrement the refs once
leaving it added to the buffer cache radix tree. This enables later
code to look up the buffer from the cache and utilize it potentially
leading to a crash.
The correct way to free the buffer is call free_extent_buffer_stale.
This function will correctly call atomic_dec explicitly for the buffer
and subsequently call release_extent_buffer which will decrement the
final reference thus correctly remove the invalid buffer from buffer
cache. This change affects only newly allocated buffers since they have
eb->refs == 2.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=202755
Reported-by: Jungyeon <jungyeon@gatech.edu>
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 448de471cd upstream.
[BUG]
When reading a file from a fuzzed image, kernel can panic like:
BTRFS warning (device loop0): csum failed root 5 ino 270 off 0 csum 0x98f94189 expected csum 0x00000000 mirror 1
assertion failed: !memcmp_extent_buffer(b, &disk_key, offsetof(struct btrfs_leaf, items[0].key), sizeof(disk_key)), file: fs/btrfs/ctree.c, line: 2544
------------[ cut here ]------------
kernel BUG at fs/btrfs/ctree.h:3500!
invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
RIP: 0010:btrfs_search_slot.cold.24+0x61/0x63 [btrfs]
Call Trace:
btrfs_lookup_csum+0x52/0x150 [btrfs]
__btrfs_lookup_bio_sums+0x209/0x640 [btrfs]
btrfs_submit_bio_hook+0x103/0x170 [btrfs]
submit_one_bio+0x59/0x80 [btrfs]
extent_read_full_page+0x58/0x80 [btrfs]
generic_file_read_iter+0x2f6/0x9d0
__vfs_read+0x14d/0x1a0
vfs_read+0x8d/0x140
ksys_read+0x52/0xc0
do_syscall_64+0x60/0x210
entry_SYSCALL_64_after_hwframe+0x49/0xbe
[CAUSE]
The fuzzed image has a corrupted leaf whose first key doesn't match its
parent:
checksum tree key (CSUM_TREE ROOT_ITEM 0)
node 29741056 level 1 items 14 free 107 generation 19 owner CSUM_TREE
fs uuid 3381d111-94a3-4ac7-8f39-611bbbdab7e6
chunk uuid 9af1c3c7-2af5-488b-8553-530bd515f14c
...
key (EXTENT_CSUM EXTENT_CSUM 79691776) block 29761536 gen 19
leaf 29761536 items 1 free space 1726 generation 19 owner CSUM_TREE
leaf 29761536 flags 0x1(WRITTEN) backref revision 1
fs uuid 3381d111-94a3-4ac7-8f39-611bbbdab7e6
chunk uuid 9af1c3c7-2af5-488b-8553-530bd515f14c
item 0 key (EXTENT_CSUM EXTENT_CSUM 8798638964736) itemoff 1751 itemsize 2244
range start 8798638964736 end 8798641262592 length 2297856
When reading the above tree block, we have extent_buffer->refs = 2 in
the context:
- initial one from __alloc_extent_buffer()
alloc_extent_buffer()
|- __alloc_extent_buffer()
|- atomic_set(&eb->refs, 1)
- one being added to fs_info->buffer_radix
alloc_extent_buffer()
|- check_buffer_tree_ref()
|- atomic_inc(&eb->refs)
So if even we call free_extent_buffer() in read_tree_block or other
similar situation, we only decrease the refs by 1, it doesn't reach 0
and won't be freed right now.
The staled eb and its corrupted content will still be kept cached.
Furthermore, we have several extra cases where we either don't do first
key check or the check is not proper for all callers:
- scrub
We just don't have first key in this context.
- shared tree block
One tree block can be shared by several snapshot/subvolume trees.
In that case, the first key check for one subvolume doesn't apply to
another.
So for the above reasons, a corrupted extent buffer can sneak into the
buffer cache.
[FIX]
Call verify_level_key in read_block_for_search to do another
verification. For that purpose the function is exported.
Due to above reasons, although we can free corrupted extent buffer from
cache, we still need the check in read_block_for_search(), for scrub and
shared tree blocks.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=202755
Link: https://bugzilla.kernel.org/show_bug.cgi?id=202757
Link: https://bugzilla.kernel.org/show_bug.cgi?id=202759
Link: https://bugzilla.kernel.org/show_bug.cgi?id=202761
Link: https://bugzilla.kernel.org/show_bug.cgi?id=202767
Link: https://bugzilla.kernel.org/show_bug.cgi?id=202769
Reported-by: Yoon Jungyeon <jungyeon@gatech.edu>
CC: stable@vger.kernel.org # 4.19+
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 272e5326c7 upstream.
The compression property resets to NULL, instead of the old value if we
fail to set the new compression parameter.
$ btrfs prop get /btrfs compression
compression=lzo
$ btrfs prop set /btrfs compression zli
ERROR: failed to set compression for /btrfs: Invalid argument
$ btrfs prop get /btrfs compression
This is because the compression property ->validate() is successful for
'zli' as the strncmp() used the length passed from the userspace.
Fix it by using the expected string length in strncmp().
Fixes: 63541927c8 ("Btrfs: add support for inode properties")
Fixes: 5c1aab1dd5 ("btrfs: Add zstd support")
CC: stable@vger.kernel.org # 4.14+
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 50398fde99 upstream.
We let pass zstd compression parameter even if it is not fully valid.
For example:
$ btrfs prop set /btrfs compression zst
$ btrfs prop get /btrfs compression
compression=zst
zlib and lzo are fine.
Fix it by checking the correct prefix length.
Fixes: 5c1aab1dd5 ("btrfs: Add zstd support")
CC: stable@vger.kernel.org # 4.14+
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f35f06c355 upstream.
Whan a filesystem is mounted with the nologreplay mount option, which
requires it to be mounted in RO mode as well, we can not allow discard on
free space inside block groups, because log trees refer to extents that
are not pinned in a block group's free space cache (pinning the extents is
precisely the first phase of replaying a log tree).
So do not allow the fitrim ioctl to do anything when the filesystem is
mounted with the nologreplay option, because later it can be mounted RW
without that option, which causes log replay to happen and result in
either a failure to replay the log trees (leading to a mount failure), a
crash or some silent corruption.
Reported-by: Darrick J. Wong <darrick.wong@oracle.com>
Fixes: 96da09192c ("btrfs: Introduce new mount option to disable tree log replay")
CC: stable@vger.kernel.org # 4.9+
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit f5fef45936 ]
[BUG]
Btrfs qgroup will still hit EDQUOT under the following case:
$ dev=/dev/test/test
$ mnt=/mnt/btrfs
$ umount $mnt &> /dev/null
$ umount $dev &> /dev/null
$ mkfs.btrfs -f $dev
$ mount $dev $mnt -o nospace_cache
$ btrfs subv create $mnt/subv
$ btrfs quota enable $mnt
$ btrfs quota rescan -w $mnt
$ btrfs qgroup limit -e 1G $mnt/subv
$ fallocate -l 900M $mnt/subv/padding
$ sync
$ rm $mnt/subv/padding
# Hit EDQUOT
$ xfs_io -f -c "pwrite 0 512M" $mnt/subv/real_file
[CAUSE]
Since commit a514d63882 ("btrfs: qgroup: Commit transaction in advance
to reduce early EDQUOT"), btrfs is not forced to commit transaction to
reclaim more quota space.
Instead, we just check pertrans metadata reservation against some
threshold and try to do asynchronously transaction commit.
However in above case, the pertrans metadata reservation is pretty small
thus it will never trigger asynchronous transaction commit.
[FIX]
Instead of only accounting pertrans metadata reservation, we calculate
how much free space we have, and if there isn't much free space left,
commit transaction asynchronously to try to free some space.
This may slow down the fs when we have less than 32M free qgroup space,
but should reduce a lot of false EDQUOT, so the cost should be
acceptable.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 0ccc3876e4 upstream.
Back in commit a89ca6f24f ("Btrfs: fix fsync after truncate when
no_holes feature is enabled") I added an assertion that is triggered when
an inline extent is found to assert that the length of the (uncompressed)
data the extent represents is the same as the i_size of the inode, since
that is true most of the time I couldn't find or didn't remembered about
any exception at that time. Later on the assertion was expanded twice to
deal with a case of a compressed inline extent representing a range that
matches the sector size followed by an expanding truncate, and another
case where fallocate can update the i_size of the inode without adding
or updating existing extents (if the fallocate range falls entirely within
the first block of the file). These two expansion/fixes of the assertion
were done by commit 7ed586d0a8 ("Btrfs: fix assertion on fsync of
regular file when using no-holes feature") and commit 6399fb5a0b
("Btrfs: fix assertion failure during fsync in no-holes mode").
These however missed the case where an falloc expands the i_size of an
inode to exactly the sector size and inline extent exists, for example:
$ mkfs.btrfs -f -O no-holes /dev/sdc
$ mount /dev/sdc /mnt
$ xfs_io -f -c "pwrite -S 0xab 0 1096" /mnt/foobar
wrote 1096/1096 bytes at offset 0
1 KiB, 1 ops; 0.0002 sec (4.448 MiB/sec and 4255.3191 ops/sec)
$ xfs_io -c "falloc 1096 3000" /mnt/foobar
$ xfs_io -c "fsync" /mnt/foobar
Segmentation fault
$ dmesg
[701253.602385] assertion failed: len == i_size || (len == fs_info->sectorsize && btrfs_file_extent_compression(leaf, extent) != BTRFS_COMPRESS_NONE) || (len < i_size && i_size < fs_info->sectorsize), file: fs/btrfs/tree-log.c, line: 4727
[701253.602962] ------------[ cut here ]------------
[701253.603224] kernel BUG at fs/btrfs/ctree.h:3533!
[701253.603503] invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC PTI
[701253.603774] CPU: 2 PID: 7192 Comm: xfs_io Tainted: G W 5.0.0-rc8-btrfs-next-45 #1
[701253.604054] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.2-0-gf9626ccb91-prebuilt.qemu-project.org 04/01/2014
[701253.604650] RIP: 0010:assfail.constprop.23+0x18/0x1a [btrfs]
(...)
[701253.605591] RSP: 0018:ffffbb48c186bc48 EFLAGS: 00010286
[701253.605914] RAX: 00000000000000de RBX: ffff921d0a7afc08 RCX: 0000000000000000
[701253.606244] RDX: 0000000000000000 RSI: ffff921d36b16868 RDI: ffff921d36b16868
[701253.606580] RBP: ffffbb48c186bcf0 R08: 0000000000000000 R09: 0000000000000000
[701253.606913] R10: 0000000000000003 R11: 0000000000000000 R12: ffff921d05d2de18
[701253.607247] R13: ffff921d03b54000 R14: 0000000000000448 R15: ffff921d059ecf80
[701253.607769] FS: 00007f14da906700(0000) GS:ffff921d36b00000(0000) knlGS:0000000000000000
[701253.608163] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[701253.608516] CR2: 000056087ea9f278 CR3: 00000002268e8001 CR4: 00000000003606e0
[701253.608880] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[701253.609250] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[701253.609608] Call Trace:
[701253.609994] btrfs_log_inode+0xdfb/0xe40 [btrfs]
[701253.610383] btrfs_log_inode_parent+0x2be/0xa60 [btrfs]
[701253.610770] ? do_raw_spin_unlock+0x49/0xc0
[701253.611150] btrfs_log_dentry_safe+0x4a/0x70 [btrfs]
[701253.611537] btrfs_sync_file+0x3b2/0x440 [btrfs]
[701253.612010] ? do_sysinfo+0xb0/0xf0
[701253.612552] do_fsync+0x38/0x60
[701253.612988] __x64_sys_fsync+0x10/0x20
[701253.613360] do_syscall_64+0x60/0x1b0
[701253.613733] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[701253.614103] RIP: 0033:0x7f14da4e66d0
(...)
[701253.615250] RSP: 002b:00007fffa670fdb8 EFLAGS: 00000246 ORIG_RAX: 000000000000004a
[701253.615647] RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007f14da4e66d0
[701253.616047] RDX: 000056087ea9c260 RSI: 000056087ea9c260 RDI: 0000000000000003
[701253.616450] RBP: 0000000000000001 R08: 0000000000000020 R09: 0000000000000010
[701253.616854] R10: 000000000000009b R11: 0000000000000246 R12: 000056087ea9c260
[701253.617257] R13: 000056087ea9c240 R14: 0000000000000000 R15: 000056087ea9dd10
(...)
[701253.619941] ---[ end trace e088d74f132b6da5 ]---
Updating the assertion again to allow for this particular case would result
in a meaningless assertion, plus there is currently no risk of logging
content that would result in any corruption after a log replay if the size
of the data encoded in an inline extent is greater than the inode's i_size
(which is not currently possibe either with or without compression),
therefore just remove the assertion.
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 139a56170d upstream.
qgroup_rsv_size is calculated as the product of
outstanding_extent * fs_info->nodesize. The product is calculated with
32 bit precision since both variables are defined as u32. Yet
qgroup_rsv_size expects a 64 bit result.
Avoid possible multiplication overflow by casting outstanding_extent to
u64. Such overflow would in the worst case (64K nodesize) require more
than 65536 extents, which is quite large and i'ts not likely that it
would happen in practice.
Fixes-coverity-id: 1435101
Fixes: ff6bc37eb7 ("btrfs: qgroup: Use independent and accurate per inode qgroup rsv")
CC: stable@vger.kernel.org # 4.19+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3897b6f0a8 upstream.
Parity page is incorrectly unmapped in finish_parity_scrub(), triggering
a reference counter bug on i386, i.e.:
[ 157.662401] kernel BUG at mm/highmem.c:349!
[ 157.666725] invalid opcode: 0000 [#1] SMP PTI
The reason is that kunmap(p_page) was completely left out, so we never
did an unmap for the p_page and the loop unmapping the rbio page was
iterating over the wrong number of stripes: unmapping should be done
with nr_data instead of rbio->real_stripes.
Test case to reproduce the bug:
- create a raid5 btrfs filesystem:
# mkfs.btrfs -m raid5 -d raid5 /dev/sdb /dev/sdc /dev/sdd /dev/sde
- mount it:
# mount /dev/sdb /mnt
- run btrfs scrub in a loop:
# while :; do btrfs scrub start -BR /mnt; done
BugLink: https://bugs.launchpad.net/bugs/1812845
Fixes: 5a6ac9eacb ("Btrfs, raid56: support parity scrub on raid56")
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0cc068e6ee upstream.
As readahead is an optimization, all errors are usually filtered out,
but still properly handled when the real read call is done. The commit
5e9d398240 ("btrfs: readpages() should submit IO as read-ahead") added
REQ_RAHEAD to readpages() because that's only used for readahead
(despite what one would expect from the callback name).
This causes a flood of messages and inflated read error stats, so skip
reporting in case it's readahead.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=202403
Reported-by: LimeTech <tomm@lime-technology.com>
Fixes: 5e9d398240 ("btrfs: readpages() should submit IO as read-ahead")
CC: stable@vger.kernel.org # 4.19+
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2cc8334270 upstream.
When Filipe added the recursive directory logging stuff in
2f2ff0ee5e ("Btrfs: fix metadata inconsistencies after directory
fsync") he specifically didn't take the directory i_mutex for the
children directories that we need to log because of lockdep. This is
generally fine, but can lead to this WARN_ON() tripping if we happen to
run delayed deletion's in between our first search and our second search
of dir_item/dir_indexes for this directory. We expect this to happen,
so the WARN_ON() isn't necessary. Drop the WARN_ON() and add a comment
so we know why this case can happen.
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bf504110bc upstream.
If we do a shrinking truncate against an inode which is already present
in the respective log tree and then rename it, as part of logging the new
name we end up logging an inode item that reflects the old size of the
file (the one which we previously logged) and not the new smaller size.
The decision to preserve the size previously logged was added by commit
1a4bcf470c ("Btrfs: fix fsync data loss after adding hard link to
inode") in order to avoid data loss after replaying the log. However that
decision is only needed for the case the logged inode size is smaller then
the current size of the inode, as explained in that commit's change log.
If the current size of the inode is smaller then the previously logged
size, we know a shrinking truncate happened and therefore need to use
that smaller size.
Example to trigger the problem:
$ mkfs.btrfs -f /dev/sdb
$ mount /dev/sdb /mnt
$ xfs_io -f -c "pwrite -S 0xab 0 8000" /mnt/foo
$ xfs_io -c "fsync" /mnt/foo
$ xfs_io -c "truncate 3000" /mnt/foo
$ mv /mnt/foo /mnt/bar
$ xfs_io -c "fsync" /mnt/bar
<power failure>
$ mount /dev/sdb /mnt
$ od -t x1 -A d /mnt/bar
0000000 ab ab ab ab ab ab ab ab ab ab ab ab ab ab ab ab
*
0008000
Once we rename the file, we log its name (and inode item), and because
the inode was already logged before in the current transaction, we log it
with a size of 8000 bytes because that is the size we previously logged
(with the first fsync). As part of the rename, besides logging the inode,
we do also sync the log, which is done since commit d4682ba03e
("Btrfs: sync log after logging new name"), so the next fsync against our
inode is effectively a no-op, since no new changes happened since the
rename operation. Even if did not sync the log during the rename
operation, the same problem (fize size of 8000 bytes instead of 3000
bytes) would be visible after replaying the log if the log ended up
getting synced to disk through some other means, such as for example by
fsyncing some other modified file. In the example above the fsync after
the rename operation is there just because not every filesystem may
guarantee logging/journalling the inode (and syncing the log/journal)
during the rename operation, for example it is needed for f2fs, but not
for ext4 and xfs.
Fix this scenario by, when logging a new name (which is triggered by
rename and link operations), using the current size of the inode instead
of the previously logged inode size.
A test case for fstests follows soon.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=202695
CC: stable@vger.kernel.org # 4.4+
Reported-by: Seulbae Kim <seulbae@gatech.edu>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8e92821878 upstream.
In the past we had data corruption when reading compressed extents that
are shared within the same file and they are consecutive, this got fixed
by commit 005efedf2c ("Btrfs: fix read corruption of compressed and
shared extents") and by commit 808f80b467 ("Btrfs: update fix for read
corruption of compressed and shared extents"). However there was a case
that was missing in those fixes, which is when the shared and compressed
extents are referenced with a non-zero offset. The following shell script
creates a reproducer for this issue:
#!/bin/bash
mkfs.btrfs -f /dev/sdc &> /dev/null
mount -o compress /dev/sdc /mnt/sdc
# Create a file with 3 consecutive compressed extents, each has an
# uncompressed size of 128Kb and a compressed size of 4Kb.
for ((i = 1; i <= 3; i++)); do
head -c 4096 /dev/zero
for ((j = 1; j <= 31; j++)); do
head -c 4096 /dev/zero | tr '\0' "\377"
done
done > /mnt/sdc/foobar
sync
echo "Digest after file creation: $(md5sum /mnt/sdc/foobar)"
# Clone the first extent into offsets 128K and 256K.
xfs_io -c "reflink /mnt/sdc/foobar 0 128K 128K" /mnt/sdc/foobar
xfs_io -c "reflink /mnt/sdc/foobar 0 256K 128K" /mnt/sdc/foobar
sync
echo "Digest after cloning: $(md5sum /mnt/sdc/foobar)"
# Punch holes into the regions that are already full of zeroes.
xfs_io -c "fpunch 0 4K" /mnt/sdc/foobar
xfs_io -c "fpunch 128K 4K" /mnt/sdc/foobar
xfs_io -c "fpunch 256K 4K" /mnt/sdc/foobar
sync
echo "Digest after hole punching: $(md5sum /mnt/sdc/foobar)"
echo "Dropping page cache..."
sysctl -q vm.drop_caches=1
echo "Digest after hole punching: $(md5sum /mnt/sdc/foobar)"
umount /dev/sdc
When running the script we get the following output:
Digest after file creation: 5a0888d80d7ab1fd31c229f83a3bbcc8 /mnt/sdc/foobar
linked 131072/131072 bytes at offset 131072
128 KiB, 1 ops; 0.0033 sec (36.960 MiB/sec and 295.6830 ops/sec)
linked 131072/131072 bytes at offset 262144
128 KiB, 1 ops; 0.0015 sec (78.567 MiB/sec and 628.5355 ops/sec)
Digest after cloning: 5a0888d80d7ab1fd31c229f83a3bbcc8 /mnt/sdc/foobar
Digest after hole punching: 5a0888d80d7ab1fd31c229f83a3bbcc8 /mnt/sdc/foobar
Dropping page cache...
Digest after hole punching: fba694ae8664ed0c2e9ff8937e7f1484 /mnt/sdc/foobar
This happens because after reading all the pages of the extent in the
range from 128K to 256K for example, we read the hole at offset 256K
and then when reading the page at offset 260K we don't submit the
existing bio, which is responsible for filling all the page in the
range 128K to 256K only, therefore adding the pages from range 260K
to 384K to the existing bio and submitting it after iterating over the
entire range. Once the bio completes, the uncompressed data fills only
the pages in the range 128K to 256K because there's no more data read
from disk, leaving the pages in the range 260K to 384K unfilled. It is
just a slightly different variant of what was solved by commit
005efedf2c ("Btrfs: fix read corruption of compressed and shared
extents").
Fix this by forcing a bio submit, during readpages(), whenever we find a
compressed extent map for a page that is different from the extent map
for the previous page or has a different starting offset (in case it's
the same compressed extent), instead of the extent map's original start
offset.
A test case for fstests follows soon.
Reported-by: Zygo Blaxell <ce3g8jdj@umail.furryterror.org>
Fixes: 808f80b467 ("Btrfs: update fix for read corruption of compressed and shared extents")
Fixes: 005efedf2c ("Btrfs: fix read corruption of compressed and shared extents")
Cc: stable@vger.kernel.org # 4.3+
Tested-by: Zygo Blaxell <ce3g8jdj@umail.furryterror.org>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 349ae63f40 upstream.
We recently had a customer issue with a corrupted filesystem. When
trying to mount this image btrfs panicked with a division by zero in
calc_stripe_length().
The corrupt chunk had a 'num_stripes' value of 1. calc_stripe_length()
takes this value and divides it by the number of copies the RAID profile
is expected to have to calculate the amount of data stripes. As a DUP
profile is expected to have 2 copies this division resulted in 1/2 = 0.
Later then the 'data_stripes' variable is used as a divisor in the
stripe length calculation which results in a division by 0 and thus a
kernel panic.
When encountering a filesystem with a DUP block group and a
'num_stripes' value unequal to 2, refuse mounting as the image is
corrupted and will lead to unexpected behaviour.
Code inspection showed a RAID1 block group has the same issues.
Fixes: e06cd3dd7c ("Btrfs: add validadtion checks for chunk loading")
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a087349066 upstream.
We are holding a transaction handle when setting an acl, therefore we can
not allocate the xattr value buffer using GFP_KERNEL, as we could deadlock
if reclaim is triggered by the allocation, therefore setup a nofs context.
Fixes: 39a27ec100 ("btrfs: use GFP_KERNEL for xattr and acl allocations")
CC: stable@vger.kernel.org # 4.9+
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b89f6d1fcb upstream.
We are holding a transaction handle when creating a tree, therefore we can
not allocate the root using GFP_KERNEL, as we could deadlock if reclaim is
triggered by the allocation, therefore setup a nofs context.
Fixes: 74e4d82757 ("btrfs: let callers of btrfs_alloc_root pass gfp flags")
CC: stable@vger.kernel.org # 4.9+
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 3cd24c6980 ]
Snapshot is expected to be fast. But if there are writers steadily
creating dirty pages in our subvolume, the snapshot may take a very long
time to complete. To fix the problem, we use tagged writepage for
snapshot flusher as we do in the generic write_cache_pages(), so we can
omit pages dirtied after the snapshot command.
This does not change the semantics regarding which data get to the
snapshot, if there are pages being dirtied during the snapshotting
operation. There's a sync called before snapshot is taken in old/new
case, any IO in flight just after that may be in the snapshot but this
depends on other system effects that might still sync the IO.
We do a simple snapshot speed test on a Intel D-1531 box:
fio --ioengine=libaio --iodepth=32 --bs=4k --rw=write --size=64G
--direct=0 --thread=1 --numjobs=1 --time_based --runtime=120
--filename=/mnt/sub/testfile --name=job1 --group_reporting & sleep 5;
time btrfs sub snap -r /mnt/sub /mnt/snap; killall fio
original: 1m58sec
patched: 6.54sec
This is the best case for this patch since for a sequential write case,
we omit nearly all pages dirtied after the snapshot command.
For a multi writers, random write test:
fio --ioengine=libaio --iodepth=32 --bs=4k --rw=randwrite --size=64G
--direct=0 --thread=1 --numjobs=4 --time_based --runtime=120
--filename=/mnt/sub/testfile --name=job1 --group_reporting & sleep 5;
time btrfs sub snap -r /mnt/sub /mnt/snap; killall fio
original: 15.83sec
patched: 10.35sec
The improvement is smaller compared to the sequential write case,
since we omit only half of the pages dirtied after snapshot command.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Ethan Lien <ethanlien@synology.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a9261d4125 ]
It's not that impossible to imagine that a device OR a btrfs image is
copied just by using the dd or the cp command. Which in case both the
copies of the btrfs will have the same fsid. If on the system with
automount enabled, the copied FS gets scanned.
We have a known bug in btrfs, that we let the device path be changed
after the device has been mounted. So using this loop hole the new
copied device would appears as if its mounted immediately after it's
been copied.
For example:
Initially.. /dev/mmcblk0p4 is mounted as /
$ lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
mmcblk0 179:0 0 29.2G 0 disk
|-mmcblk0p4 179:4 0 4G 0 part /
|-mmcblk0p2 179:2 0 500M 0 part /boot
|-mmcblk0p3 179:3 0 256M 0 part [SWAP]
`-mmcblk0p1 179:1 0 256M 0 part /boot/efi
$ btrfs fi show
Label: none uuid: 07892354-ddaa-4443-90ea-f76a06accaba
Total devices 1 FS bytes used 1.40GiB
devid 1 size 4.00GiB used 3.00GiB path /dev/mmcblk0p4
Copy mmcblk0 to sda
$ dd if=/dev/mmcblk0 of=/dev/sda
And immediately after the copy completes the change in the device
superblock is notified which the automount scans using btrfs device scan
and the new device sda becomes the mounted root device.
$ lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:0 1 14.9G 0 disk
|-sda4 8:4 1 4G 0 part /
|-sda2 8:2 1 500M 0 part
|-sda3 8:3 1 256M 0 part
`-sda1 8:1 1 256M 0 part
mmcblk0 179:0 0 29.2G 0 disk
|-mmcblk0p4 179:4 0 4G 0 part
|-mmcblk0p2 179:2 0 500M 0 part /boot
|-mmcblk0p3 179:3 0 256M 0 part [SWAP]
`-mmcblk0p1 179:1 0 256M 0 part /boot/efi
$ btrfs fi show /
Label: none uuid: 07892354-ddaa-4443-90ea-f76a06accaba
Total devices 1 FS bytes used 1.40GiB
devid 1 size 4.00GiB used 3.00GiB path /dev/sda4
The bug is quite nasty that you can't either unmount /dev/sda4 or
/dev/mmcblk0p4. And the problem does not get solved until you take sda
out of the system on to another system to change its fsid using the
'btrfstune -u' command.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 532b618bdf upstream.
The subvol_name is allocated in btrfs_parse_subvol_options and is
consumed and freed in mount_subvol. Add a free to the error paths that
don't call mount_subvol so that it is guaranteed that subvol_name is
freed when an error happens.
Fixes: 312c89fbca ("btrfs: cleanup btrfs_mount() using btrfs_mount_root()")
Cc: stable@vger.kernel.org # v4.19+
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a627947076 upstream.
When splitting a leaf or node from one of the trees that are modified when
flushing pending block groups (extent, chunk, device and free space trees),
we need to allocate a new tree block, which in turn can result in the need
to allocate a new block group. After allocating the new block group we may
need to flush new block groups that were previously allocated during the
course of the current transaction, which is what may cause a deadlock due
to attempts to write lock twice the same leaf or node, as when splitting
a leaf or node we are holding a write lock on it and its parent node.
The same type of deadlock can also happen when increasing the tree's
height, since we are holding a lock on the existing root while allocating
the tree block to use as the new root node.
An example trace when the deadlock happens during the leaf split path is:
[27175.293054] CPU: 0 PID: 3005 Comm: kworker/u17:6 Tainted: G W 4.19.16 #1
[27175.293942] Hardware name: Penguin Computing Relion 1900/MD90-FS0-ZB-XX, BIOS R15 06/25/2018
[27175.294846] Workqueue: btrfs-extent-refs btrfs_extent_refs_helper [btrfs]
(...)
[27175.298384] RSP: 0018:ffffab2087107758 EFLAGS: 00010246
[27175.299269] RAX: 0000000000000bbd RBX: ffff9fadc7141c48 RCX: 0000000000000001
[27175.300155] RDX: 0000000000000001 RSI: 0000000000000002 RDI: ffff9fadc7141c48
[27175.301023] RBP: 0000000000000001 R08: ffff9faeb6ac1040 R09: ffff9fa9c0000000
[27175.301887] R10: 0000000000000000 R11: 0000000000000040 R12: ffff9fb21aac8000
[27175.302743] R13: ffff9fb1a64d6a20 R14: 0000000000000001 R15: ffff9fb1a64d6a18
[27175.303601] FS: 0000000000000000(0000) GS:ffff9fb21fa00000(0000) knlGS:0000000000000000
[27175.304468] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[27175.305339] CR2: 00007fdc8743ead8 CR3: 0000000763e0a006 CR4: 00000000003606f0
[27175.306220] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[27175.307087] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[27175.307940] Call Trace:
[27175.308802] btrfs_search_slot+0x779/0x9a0 [btrfs]
[27175.309669] ? update_space_info+0xba/0xe0 [btrfs]
[27175.310534] btrfs_insert_empty_items+0x67/0xc0 [btrfs]
[27175.311397] btrfs_insert_item+0x60/0xd0 [btrfs]
[27175.312253] btrfs_create_pending_block_groups+0xee/0x210 [btrfs]
[27175.313116] do_chunk_alloc+0x25f/0x300 [btrfs]
[27175.313984] find_free_extent+0x706/0x10d0 [btrfs]
[27175.314855] btrfs_reserve_extent+0x9b/0x1d0 [btrfs]
[27175.315707] btrfs_alloc_tree_block+0x100/0x5b0 [btrfs]
[27175.316548] split_leaf+0x130/0x610 [btrfs]
[27175.317390] btrfs_search_slot+0x94d/0x9a0 [btrfs]
[27175.318235] btrfs_insert_empty_items+0x67/0xc0 [btrfs]
[27175.319087] alloc_reserved_file_extent+0x84/0x2c0 [btrfs]
[27175.319938] __btrfs_run_delayed_refs+0x596/0x1150 [btrfs]
[27175.320792] btrfs_run_delayed_refs+0xed/0x1b0 [btrfs]
[27175.321643] delayed_ref_async_start+0x81/0x90 [btrfs]
[27175.322491] normal_work_helper+0xd0/0x320 [btrfs]
[27175.323328] ? move_linked_works+0x6e/0xa0
[27175.324160] process_one_work+0x191/0x370
[27175.324976] worker_thread+0x4f/0x3b0
[27175.325763] kthread+0xf8/0x130
[27175.326531] ? rescuer_thread+0x320/0x320
[27175.327284] ? kthread_create_worker_on_cpu+0x50/0x50
[27175.328027] ret_from_fork+0x35/0x40
[27175.328741] ---[ end trace 300a1b9f0ac30e26 ]---
Fix this by preventing the flushing of new blocks groups when splitting a
leaf/node and when inserting a new root node for one of the trees modified
by the flushing operation, similar to what is done when COWing a node/leaf
from on of these trees.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=202383
Reported-by: Eli V <eliventer@gmail.com>
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 1690dd41e0 ]
In the error handling block, err holds the return value of either
btrfs_del_root_ref() or btrfs_del_inode_ref() but it hasn't been checked
since it's introduction with commit fe66a05a06 (Btrfs: improve error
handling for btrfs_insert_dir_item callers) in 2012.
If the error handling in the error handling fails, there's not much left
to do and the abort either happened earlier in the callees or is
necessary here.
So if one of btrfs_del_root_ref() or btrfs_del_inode_ref() failed, abort
the transaction, but still return the original code of the failure
stored in 'ret' as this will be reported to the user.
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d189dd70e2 ]
The device replace cancel thread can race with the replace start thread
and if fs_info::scrubs_running is not yet set, btrfs_scrub_cancel() will
fail to stop the scrub thread.
The scrub thread continues with the scrub for replace which then will
try to write to the target device and which is already freed by the
cancel thread.
scrub_setup_ctx() warns as tgtdev is NULL.
struct scrub_ctx *scrub_setup_ctx(struct btrfs_device *dev, int is_dev_replace)
{
...
if (is_dev_replace) {
WARN_ON(!fs_info->dev_replace.tgtdev); <===
sctx->pages_per_wr_bio = SCRUB_PAGES_PER_WR_BIO;
sctx->wr_tgtdev = fs_info->dev_replace.tgtdev;
sctx->flush_all_writes = false;
}
[ 6724.497655] BTRFS info (device sdb): dev_replace from /dev/sdb (devid 1) to /dev/sdc started
[ 6753.945017] BTRFS info (device sdb): dev_replace from /dev/sdb (devid 1) to /dev/sdc canceled
[ 6852.426700] WARNING: CPU: 0 PID: 4494 at fs/btrfs/scrub.c:622 scrub_setup_ctx.isra.19+0x220/0x230 [btrfs]
...
[ 6852.428928] RIP: 0010:scrub_setup_ctx.isra.19+0x220/0x230 [btrfs]
...
[ 6852.432970] Call Trace:
[ 6852.433202] btrfs_scrub_dev+0x19b/0x5c0 [btrfs]
[ 6852.433471] btrfs_dev_replace_start+0x48c/0x6a0 [btrfs]
[ 6852.433800] btrfs_dev_replace_by_ioctl+0x3a/0x60 [btrfs]
[ 6852.434097] btrfs_ioctl+0x2476/0x2d20 [btrfs]
[ 6852.434365] ? do_sigaction+0x7d/0x1e0
[ 6852.434623] do_vfs_ioctl+0xa9/0x6c0
[ 6852.434865] ? syscall_trace_enter+0x1c8/0x310
[ 6852.435124] ? syscall_trace_enter+0x1c8/0x310
[ 6852.435387] ksys_ioctl+0x60/0x90
[ 6852.435663] __x64_sys_ioctl+0x16/0x20
[ 6852.435907] do_syscall_64+0x50/0x180
[ 6852.436150] entry_SYSCALL_64_after_hwframe+0x49/0xbe
Further, as the replace thread enters scrub_write_page_to_dev_replace()
without the target device it panics:
static int scrub_add_page_to_wr_bio(struct scrub_ctx *sctx,
struct scrub_page *spage)
{
...
bio_set_dev(bio, sbio->dev->bdev); <======
[ 6929.715145] BUG: unable to handle kernel NULL pointer dereference at 00000000000000a0
..
[ 6929.717106] Workqueue: btrfs-scrub btrfs_scrub_helper [btrfs]
[ 6929.717420] RIP: 0010:scrub_write_page_to_dev_replace+0xb4/0x260
[btrfs]
..
[ 6929.721430] Call Trace:
[ 6929.721663] scrub_write_block_to_dev_replace+0x3f/0x60 [btrfs]
[ 6929.721975] scrub_bio_end_io_worker+0x1af/0x490 [btrfs]
[ 6929.722277] normal_work_helper+0xf0/0x4c0 [btrfs]
[ 6929.722552] process_one_work+0x1f4/0x520
[ 6929.722805] ? process_one_work+0x16e/0x520
[ 6929.723063] worker_thread+0x46/0x3d0
[ 6929.723313] kthread+0xf8/0x130
[ 6929.723544] ? process_one_work+0x520/0x520
[ 6929.723800] ? kthread_delayed_work_timer_fn+0x80/0x80
[ 6929.724081] ret_from_fork+0x3a/0x50
Fix this by letting the btrfs_dev_replace_finishing() to do the job of
cleaning after the cancel, including freeing of the target device.
btrfs_dev_replace_finishing() is called when btrfs_scub_dev() returns
along with the scrub return status.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit baf92114c7 ]
Commit 92e222df7b "btrfs: alloc_chunk: fix DUP stripe size handling"
fixed calculating the stripe_size for a new DUP chunk.
However, the same calculation reappears a bit later, and that one was
not changed yet. The resulting bug that is exposed is that the newly
allocated device extents ('stripes') can have a few MiB overlap with the
next thing stored after them, which is another device extent or the end
of the disk.
The scenario in which this can happen is:
* The block device for the filesystem is less than 10GiB in size.
* The amount of contiguous free unallocated disk space chosen to use for
chunk allocation is 20% of the total device size, or a few MiB more or
less.
An example:
- The filesystem device is 7880MiB (max_chunk_size gets set to 788MiB)
- There's 1578MiB unallocated raw disk space left in one contiguous
piece.
In this case stripe_size is first calculated as 789MiB, (half of
1578MiB).
Since 789MiB (stripe_size * data_stripes) > 788MiB (max_chunk_size), we
enter the if block. Now stripe_size value is immediately overwritten
while calculating an adjusted value based on max_chunk_size, which ends
up as 788MiB.
Next, the value is rounded up to a 16MiB boundary, 800MiB, which is
actually more than the value we had before. However, the last comparison
fails to detect this, because it's comparing the value with the total
amount of free space, which is about twice the size of stripe_size.
In the example above, this means that the resulting raw disk space being
allocated is 1600MiB, while only a gap of 1578MiB has been found. The
second device extent object for this DUP chunk will overlap for 22MiB
with whatever comes next.
The underlying problem here is that the stripe_size is reused all the
time for different things. So, when entering the code in the if block,
stripe_size is immediately overwritten with something else. If later we
decide we want to have the previous value back, then the logic to
compute it was copy pasted in again.
With this change, the value in stripe_size is not unnecessarily
destroyed, so the duplicated calculation is not needed any more.
Signed-off-by: Hans van Kranenburg <hans.van.kranenburg@mendix.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5eb193812a ]
Enhance btrfs_verify_dev_extents() to remember previous checked dev
extents, so it can verify no dev extents can overlap.
Analysis from Hans:
"Imagine allocating a DATA|DUP chunk.
In the chunk allocator, we first set...
max_stripe_size = SZ_1G;
max_chunk_size = BTRFS_MAX_DATA_CHUNK_SIZE
... which is 10GiB.
Then...
/* we don't want a chunk larger than 10% of writeable space */
max_chunk_size = min(div_factor(fs_devices->total_rw_bytes, 1),
max_chunk_size);
Imagine we only have one 7880MiB block device in this filesystem. Now
max_chunk_size is down to 788MiB.
The next step in the code is to search for max_stripe_size * dev_stripes
amount of free space on the device, which is in our example 1GiB * 2 =
2GiB. Imagine the device has exactly 1578MiB free in one contiguous
piece. This amount of bytes will be put in devices_info[ndevs - 1].max_avail
Next we recalculate the stripe_size (which is actually the device extent
length), based on the actual maximum amount of available raw disk space:
stripe_size = div_u64(devices_info[ndevs - 1].max_avail, dev_stripes);
stripe_size is now 789MiB
Next we do...
data_stripes = num_stripes / ncopies
...where data_stripes ends up as 1, because num_stripes is 2 (the amount
of device extents we're going to have), and DUP has ncopies 2.
Next there's a check...
if (stripe_size * data_stripes > max_chunk_size)
...which matches because 789MiB * 1 > 788MiB.
We go into the if code, and next is...
stripe_size = div_u64(max_chunk_size, data_stripes);
...which resets stripe_size to max_chunk_size: 788MiB
Next is a fun one...
/* bump the answer up to a 16MB boundary */
stripe_size = round_up(stripe_size, SZ_16M);
...which changes stripe_size from 788MiB to 800MiB.
We're not done changing stripe_size yet...
/* But don't go higher than the limits we found while searching
* for free extents
*/
stripe_size = min(devices_info[ndevs - 1].max_avail,
stripe_size);
This is bad. max_avail is twice the stripe_size (we need to fit 2 device
extents on the same device for DUP).
The result here is that 800MiB < 1578MiB, so it's unchanged. However,
the resulting DUP chunk will need 1600MiB disk space, which isn't there,
and the second dev_extent might extend into the next thing (next
dev_extent? end of device?) for 22MiB.
The last shown line of code relies on a situation where there's twice
the value of stripe_size present as value for the variable stripe_size
when it's DUP. This was actually the case before commit 92e222df7b
"btrfs: alloc_chunk: fix DUP stripe size handling", from which I quote:
"[...] in the meantime there's a check to see if the stripe_size does
not exceed max_chunk_size. Since during this check stripe_size is twice
the amount as intended, the check will reduce the stripe_size to
max_chunk_size if the actual correct to be used stripe_size is more than
half the amount of max_chunk_size."
In the previous version of the code, the 16MiB alignment (why is this
done, by the way?) would result in a 50% chance that it would actually
do an 8MiB alignment for the individual dev_extents, since it was
operating on double the size. Does this matter?
Does it matter that stripe_size can be set to anything which is not
16MiB aligned because of the amount of remaining available disk space
which is just taken?
What is the main purpose of this round_up?
The most straightforward thing to do seems something like...
stripe_size = min(
div_u64(devices_info[ndevs - 1].max_avail, dev_stripes),
stripe_size
)
..just putting half of the max_avail into stripe_size."
Link: https://lore.kernel.org/linux-btrfs/b3461a38-e5f8-f41d-c67c-2efac8129054@mendix.com/
Reported-by: Hans van Kranenburg <hans.van.kranenburg@mendix.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
[ add analysis from report ]
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 77b7aad195 upstream.
This reverts commit e73e81b6d0.
This patch causes a few problems:
- adds latency to btrfs_finish_ordered_io
- as btrfs_finish_ordered_io is used for free space cache, generating
more work from btrfs_btree_balance_dirty_nodelay could end up in the
same workque, effectively deadlocking
12260 kworker/u96:16+btrfs-freespace-write D
[<0>] balance_dirty_pages+0x6e6/0x7ad
[<0>] balance_dirty_pages_ratelimited+0x6bb/0xa90
[<0>] btrfs_finish_ordered_io+0x3da/0x770
[<0>] normal_work_helper+0x1c5/0x5a0
[<0>] process_one_work+0x1ee/0x5a0
[<0>] worker_thread+0x46/0x3d0
[<0>] kthread+0xf5/0x130
[<0>] ret_from_fork+0x24/0x30
[<0>] 0xffffffffffffffff
Transaction commit will wait on the freespace cache:
838 btrfs-transacti D
[<0>] btrfs_start_ordered_extent+0x154/0x1e0
[<0>] btrfs_wait_ordered_range+0xbd/0x110
[<0>] __btrfs_wait_cache_io+0x49/0x1a0
[<0>] btrfs_write_dirty_block_groups+0x10b/0x3b0
[<0>] commit_cowonly_roots+0x215/0x2b0
[<0>] btrfs_commit_transaction+0x37e/0x910
[<0>] transaction_kthread+0x14d/0x180
[<0>] kthread+0xf5/0x130
[<0>] ret_from_fork+0x24/0x30
[<0>] 0xffffffffffffffff
And then writepages ends up waiting on transaction commit:
9520 kworker/u96:13+flush-btrfs-1 D
[<0>] wait_current_trans+0xac/0xe0
[<0>] start_transaction+0x21b/0x4b0
[<0>] cow_file_range_inline+0x10b/0x6b0
[<0>] cow_file_range.isra.69+0x329/0x4a0
[<0>] run_delalloc_range+0x105/0x3c0
[<0>] writepage_delalloc+0x119/0x180
[<0>] __extent_writepage+0x10c/0x390
[<0>] extent_write_cache_pages+0x26f/0x3d0
[<0>] extent_writepages+0x4f/0x80
[<0>] do_writepages+0x17/0x60
[<0>] __writeback_single_inode+0x59/0x690
[<0>] writeback_sb_inodes+0x291/0x4e0
[<0>] __writeback_inodes_wb+0x87/0xb0
[<0>] wb_writeback+0x3bb/0x500
[<0>] wb_workfn+0x40d/0x610
[<0>] process_one_work+0x1ee/0x5a0
[<0>] worker_thread+0x1e0/0x3d0
[<0>] kthread+0xf5/0x130
[<0>] ret_from_fork+0x24/0x30
[<0>] 0xffffffffffffffff
Eventually, we have every process in the system waiting on
balance_dirty_pages(), and nobody is able to make progress on page
writeback.
The original patch tried to fix an OOM condition, that happened on 4.4 but no
success reproducing that on later kernels (4.19 and 4.20). This is more likely
a problem in OOM itself.
Link: https://lore.kernel.org/linux-btrfs/20180528054821.9092-1-ethanlien@synology.com/
Reported-by: Chris Mason <clm@fb.com>
CC: stable@vger.kernel.org # 4.18+
CC: ethanlien <ethanlien@synology.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 827aa18e7b upstream.
When initializing the security xattrs, we are holding a transaction handle
therefore we need to use a GFP_NOFS context in order to avoid a deadlock
with reclaim in case it's triggered.
Fixes: 39a27ec100 ("btrfs: use GFP_KERNEL for xattr and acl allocations")
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9a6f209e36 upstream.
If the quota enable and snapshot creation ioctls are called concurrently
we can get into a deadlock where the task enabling quotas will deadlock
on the fs_info->qgroup_ioctl_lock mutex because it attempts to lock it
twice, or the task creating a snapshot tries to commit the transaction
while the task enabling quota waits for the former task to commit the
transaction while holding the mutex. The following time diagrams show how
both cases happen.
First scenario:
CPU 0 CPU 1
btrfs_ioctl()
btrfs_ioctl_quota_ctl()
btrfs_quota_enable()
mutex_lock(fs_info->qgroup_ioctl_lock)
btrfs_start_transaction()
btrfs_ioctl()
btrfs_ioctl_snap_create_v2
create_snapshot()
--> adds snapshot to the
list pending_snapshots
of the current
transaction
btrfs_commit_transaction()
create_pending_snapshots()
create_pending_snapshot()
qgroup_account_snapshot()
btrfs_qgroup_inherit()
mutex_lock(fs_info->qgroup_ioctl_lock)
--> deadlock, mutex already locked
by this task at
btrfs_quota_enable()
Second scenario:
CPU 0 CPU 1
btrfs_ioctl()
btrfs_ioctl_quota_ctl()
btrfs_quota_enable()
mutex_lock(fs_info->qgroup_ioctl_lock)
btrfs_start_transaction()
btrfs_ioctl()
btrfs_ioctl_snap_create_v2
create_snapshot()
--> adds snapshot to the
list pending_snapshots
of the current
transaction
btrfs_commit_transaction()
--> waits for task at
CPU 0 to release
its transaction
handle
btrfs_commit_transaction()
--> sees another task started
the transaction commit first
--> releases its transaction
handle
--> waits for the transaction
commit to be completed by
the task at CPU 1
create_pending_snapshot()
qgroup_account_snapshot()
btrfs_qgroup_inherit()
mutex_lock(fs_info->qgroup_ioctl_lock)
--> deadlock, task at CPU 0
has the mutex locked but
it is waiting for us to
finish the transaction
commit
So fix this by setting the quota enabled flag in fs_info after committing
the transaction at btrfs_quota_enable(). This ends up serializing quota
enable and snapshot creation as if the snapshot creation happened just
before the quota enable request. The quota rescan task, scheduled after
committing the transaction in btrfs_quote_enable(), will do the accounting.
Fixes: 6426c7ad69 ("btrfs: qgroup: Fix qgroup accounting when creating snapshot")
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5a8067c0d1 upstream.
The available allocation bits members from struct btrfs_fs_info are
protected by a sequence lock, and when starting balance we access them
incorrectly in two different ways:
1) In the read sequence lock loop at btrfs_balance() we use the values we
read from fs_info->avail_*_alloc_bits and we can immediately do actions
that have side effects and can not be undone (printing a message and
jumping to a label). This is wrong because a retry might be needed, so
our actions must not have side effects and must be repeatable as long
as read_seqretry() returns a non-zero value. In other words, we were
essentially ignoring the sequence lock;
2) Right below the read sequence lock loop, we were reading the values
from avail_metadata_alloc_bits and avail_data_alloc_bits without any
protection from concurrent writers, that is, reading them outside of
the read sequence lock critical section.
So fix this by making sure we only read the available allocation bits
while in a read sequence lock critical section and that what we do in the
critical section is repeatable (has nothing that can not be undone) so
that any eventual retry that is needed is handled properly.
Fixes: de98ced9e7 ("Btrfs: use seqlock to protect fs_info->avail_{data, metadata, system}_alloc_bits")
Fixes: 1450612797 ("btrfs: fix a bogus warning when converting only data or metadata")
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a6d8654d88 upstream.
When modifying the free space tree we can end up COWing one of its extent
buffers which in turn might result in allocating a new chunk, which in
turn can result in flushing (finish creation) of pending block groups. If
that happens we can deadlock because creating a pending block group needs
to update the free space tree, and if any of the updates tries to modify
the same extent buffer that we are COWing, we end up in a deadlock since
we try to write lock twice the same extent buffer.
So fix this by skipping pending block group creation if we are COWing an
extent buffer from the free space tree. This is a case missed by commit
5ce555578e ("Btrfs: fix deadlock when writing out free space caches").
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=202173
Fixes: 5ce555578e ("Btrfs: fix deadlock when writing out free space caches")
CC: stable@vger.kernel.org # 4.18+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit be6821f82c upstream.
If we create a snapshot of a snapshot currently being used by a send
operation, we can end up with send failing unexpectedly (returning
-ENOENT error to user space for example). The following diagram shows
how this happens.
CPU 1 CPU2 CPU3
btrfs_ioctl_send()
(...)
create_snapshot()
-> creates snapshot of a
root used by the send
task
btrfs_commit_transaction()
create_pending_snapshot()
__get_inode_info()
btrfs_search_slot()
btrfs_search_slot_get_root()
down_read commit_root_sem
get reference on eb of the
commit root
-> eb with bytenr == X
up_read commit_root_sem
btrfs_cow_block(root node)
btrfs_free_tree_block()
-> creates delayed ref to
free the extent
btrfs_run_delayed_refs()
-> runs the delayed ref,
adds extent to
fs_info->pinned_extents
btrfs_finish_extent_commit()
unpin_extent_range()
-> marks extent as free
in the free space cache
transaction commit finishes
btrfs_start_transaction()
(...)
btrfs_cow_block()
btrfs_alloc_tree_block()
btrfs_reserve_extent()
-> allocates extent at
bytenr == X
btrfs_init_new_buffer(bytenr X)
btrfs_find_create_tree_block()
alloc_extent_buffer(bytenr X)
find_extent_buffer(bytenr X)
-> returns existing eb,
which the send task got
(...)
-> modifies content of the
eb with bytenr == X
-> uses an eb that now
belongs to some other
tree and no more matches
the commit root of the
snapshot, resuts will be
unpredictable
The consequences of this race can be various, and can lead to searches in
the commit root performed by the send task failing unexpectedly (unable to
find inode items, returning -ENOENT to user space, for example) or not
failing because an inode item with the same number was added to the tree
that reused the metadata extent, in which case send can behave incorrectly
in the worst case or just fail later for some reason.
Fix this by performing a copy of the commit root's extent buffer when doing
a search in the context of a send operation.
CC: stable@vger.kernel.org # 4.4.x: 1fc28d8e2e: Btrfs: move get root out of btrfs_search_slot to a helper
CC: stable@vger.kernel.org # 4.4.x: f9ddfd0592: Btrfs: remove unused check of skip_locking
CC: stable@vger.kernel.org # 4.4.x
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0568e82dbe upstream.
With my delayed refs patches in place we started seeing a large amount
of aborts in __btrfs_free_extent:
BTRFS error (device sdb1): unable to find ref byte nr 91947008 parent 0 root 35964 owner 1 offset 0
Call Trace:
? btrfs_merge_delayed_refs+0xaf/0x340
__btrfs_run_delayed_refs+0x6ea/0xfc0
? btrfs_set_path_blocking+0x31/0x60
btrfs_run_delayed_refs+0xeb/0x180
btrfs_commit_transaction+0x179/0x7f0
? btrfs_check_space_for_delayed_refs+0x30/0x50
? should_end_transaction.isra.19+0xe/0x40
btrfs_drop_snapshot+0x41c/0x7c0
btrfs_clean_one_deleted_snapshot+0xb5/0xd0
cleaner_kthread+0xf6/0x120
kthread+0xf8/0x130
? btree_invalidatepage+0x90/0x90
? kthread_bind+0x10/0x10
ret_from_fork+0x35/0x40
This was because btrfs_drop_snapshot depends on the root not being
modified while it's dropping the snapshot. It will unlock the root node
(and really every node) as it walks down the tree, only to re-lock it
when it needs to do something. This is a problem because if we modify
the tree we could cow a block in our path, which frees our reference to
that block. Then once we get back to that shared block we'll free our
reference to it again, and get ENOENT when trying to lookup our extent
reference to that block in __btrfs_free_extent.
This is ultimately happening because we have delayed items left to be
processed for our deleted snapshot _after_ all of the inodes are closed
for the snapshot. We only run the delayed inode item if we're deleting
the inode, and even then we do not run the delayed insertions or delayed
removals. These can be run at any point after our final inode does its
last iput, which is what triggers the snapshot deletion. We can end up
with the snapshot deletion happening and then have the delayed items run
on that file system, resulting in the above problem.
This problem has existed forever, however my patches made it much easier
to hit as I wake up the cleaner much more often to deal with delayed
iputs, which made us more likely to start the snapshot dropping work
before the transaction commits, which is when the delayed items would
generally be run. Before, generally speaking, we would run the delayed
items, commit the transaction, and wakeup the cleaner thread to start
deleting snapshots, which means we were less likely to hit this problem.
You could still hit it if you had multiple snapshots to be deleted and
ended up with lots of delayed items, but it was definitely harder.
Fix for now by simply running all the delayed items before starting to
drop the snapshot. We could make this smarter in the future by making
the delayed items per-root, and then simply drop any delayed items for
roots that we are going to delete. But for now just a quick and easy
solution is the safest.
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 41bd606769 upstream.
The log tree has a long standing problem that when a file is fsync'ed we
only check for new ancestors, created in the current transaction, by
following only the hard link for which the fsync was issued. We follow the
ancestors using the VFS' dget_parent() API. This means that if we create a
new link for a file in a directory that is new (or in an any other new
ancestor directory) and then fsync the file using an old hard link, we end
up not logging the new ancestor, and on log replay that new hard link and
ancestor do not exist. In some cases, involving renames, the file will not
exist at all.
Example:
mkfs.btrfs -f /dev/sdb
mount /dev/sdb /mnt
mkdir /mnt/A
touch /mnt/foo
ln /mnt/foo /mnt/A/bar
xfs_io -c fsync /mnt/foo
<power failure>
In this example after log replay only the hard link named 'foo' exists
and directory A does not exist, which is unexpected. In other major linux
filesystems, such as ext4, xfs and f2fs for example, both hard links exist
and so does directory A after mounting again the filesystem.
Checking if any new ancestors are new and need to be logged was added in
2009 by commit 12fcfd22fe ("Btrfs: tree logging unlink/rename fixes"),
however only for the ancestors of the hard link (dentry) for which the
fsync was issued, instead of checking for all ancestors for all of the
inode's hard links.
So fix this by tracking the id of the last transaction where a hard link
was created for an inode and then on fsync fallback to a full transaction
commit when an inode has more than one hard link and at least one new hard
link was created in the current transaction. This is the simplest solution
since this is not a common use case (adding frequently hard links for
which there's an ancestor created in the current transaction and then
fsync the file). In case it ever becomes a common use case, a solution
that consists of iterating the fs/subvol btree for each hard link and
check if any ancestor is new, could be implemented.
This solves many unexpected scenarios reported by Jayashree Mohan and
Vijay Chidambaram, and for which there is a new test case for fstests
under review.
Fixes: 12fcfd22fe ("Btrfs: tree logging unlink/rename fixes")
CC: stable@vger.kernel.org # 4.4+
Reported-by: Vijay Chidambaram <vvijay03@gmail.com>
Reported-by: Jayashree Mohan <jayashree2912@gmail.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 27a7ff554e upstream.
The test case btrfs/001 with inode_cache mount option will encounter the
following warning:
WARNING: CPU: 1 PID: 23700 at fs/btrfs/inode.c:956 cow_file_range.isra.19+0x32b/0x430 [btrfs]
CPU: 1 PID: 23700 Comm: btrfs Kdump: loaded Tainted: G W O 4.20.0-rc4-custom+ #30
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
RIP: 0010:cow_file_range.isra.19+0x32b/0x430 [btrfs]
Call Trace:
? free_extent_buffer+0x46/0x90 [btrfs]
run_delalloc_nocow+0x455/0x900 [btrfs]
btrfs_run_delalloc_range+0x1a7/0x360 [btrfs]
writepage_delalloc+0xf9/0x150 [btrfs]
__extent_writepage+0x125/0x3e0 [btrfs]
extent_write_cache_pages+0x1b6/0x3e0 [btrfs]
? __wake_up_common_lock+0x63/0xc0
extent_writepages+0x50/0x80 [btrfs]
do_writepages+0x41/0xd0
? __filemap_fdatawrite_range+0x9e/0xf0
__filemap_fdatawrite_range+0xbe/0xf0
btrfs_fdatawrite_range+0x1b/0x50 [btrfs]
__btrfs_write_out_cache+0x42c/0x480 [btrfs]
btrfs_write_out_ino_cache+0x84/0xd0 [btrfs]
btrfs_save_ino_cache+0x551/0x660 [btrfs]
commit_fs_roots+0xc5/0x190 [btrfs]
btrfs_commit_transaction+0x2bf/0x8d0 [btrfs]
btrfs_mksubvol+0x48d/0x4d0 [btrfs]
btrfs_ioctl_snap_create_transid+0x170/0x180 [btrfs]
btrfs_ioctl_snap_create_v2+0x124/0x180 [btrfs]
btrfs_ioctl+0x123f/0x3030 [btrfs]
The file extent generation of the free space inode is equal to the last
snapshot of the file root, so the inode will be passed to cow_file_rage.
But the inode was created and its extents were preallocated in
btrfs_save_ino_cache, there are no cow copies on disk.
The preallocated extent is not yet in the extent tree, and
btrfs_cross_ref_exist will ignore the -ENOENT returned by
check_committed_ref, so we can directly write the inode to the disk.
Fixes: 78d4295b1e ("btrfs: lift some btrfs_cross_ref_exist checks in nocow path")
CC: stable@vger.kernel.org # 4.18+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Lu Fengqi <lufq.fnst@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 05c49e6bc1 upstream.
In a secnario where balance and replace co-exists as below,
- start balance
- pause balance
- start replace
- reboot
and when system restarts, balance resumes first. Then the replace is
attempted to restart but will fail as the EXCL_OP lock is already held
by the balance. If so place the replace state back to
BTRFS_IOCTL_DEV_REPLACE_STATE_SUSPENDED state.
Fixes: 010a47bde9 ("btrfs: add proper safety check before resuming dev-replace")
CC: stable@vger.kernel.org # 4.18+
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0d228ece59 upstream.
At the time of forced unmount we place the running replace to
BTRFS_IOCTL_DEV_REPLACE_STATE_SUSPENDED state, so when the system comes
back and expect the target device is missing.
Then let the replace state continue to be in
BTRFS_IOCTL_DEV_REPLACE_STATE_SUSPENDED state instead of
BTRFS_IOCTL_DEV_REPLACE_STATE_STARTED as there isn't any matching scrub
running as part of replace.
Fixes: e93c89c1aa ("Btrfs: add new sources for device replace code")
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Josef Bacik