Commit Graph

599 Commits

Author SHA1 Message Date
Linus Torvalds 0429fbc0bd Merge branch 'for-3.18-consistent-ops' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu
Pull percpu consistent-ops changes from Tejun Heo:
 "Way back, before the current percpu allocator was implemented, static
  and dynamic percpu memory areas were allocated and handled separately
  and had their own accessors.  The distinction has been gone for many
  years now; however, the now duplicate two sets of accessors remained
  with the pointer based ones - this_cpu_*() - evolving various other
  operations over time.  During the process, we also accumulated other
  inconsistent operations.

  This pull request contains Christoph's patches to clean up the
  duplicate accessor situation.  __get_cpu_var() uses are replaced with
  with this_cpu_ptr() and __this_cpu_ptr() with raw_cpu_ptr().

  Unfortunately, the former sometimes is tricky thanks to C being a bit
  messy with the distinction between lvalues and pointers, which led to
  a rather ugly solution for cpumask_var_t involving the introduction of
  this_cpu_cpumask_var_ptr().

  This converts most of the uses but not all.  Christoph will follow up
  with the remaining conversions in this merge window and hopefully
  remove the obsolete accessors"

* 'for-3.18-consistent-ops' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: (38 commits)
  irqchip: Properly fetch the per cpu offset
  percpu: Resolve ambiguities in __get_cpu_var/cpumask_var_t -fix
  ia64: sn_nodepda cannot be assigned to after this_cpu conversion. Use __this_cpu_write.
  percpu: Resolve ambiguities in __get_cpu_var/cpumask_var_t
  Revert "powerpc: Replace __get_cpu_var uses"
  percpu: Remove __this_cpu_ptr
  clocksource: Replace __this_cpu_ptr with raw_cpu_ptr
  sparc: Replace __get_cpu_var uses
  avr32: Replace __get_cpu_var with __this_cpu_write
  blackfin: Replace __get_cpu_var uses
  tile: Use this_cpu_ptr() for hardware counters
  tile: Replace __get_cpu_var uses
  powerpc: Replace __get_cpu_var uses
  alpha: Replace __get_cpu_var
  ia64: Replace __get_cpu_var uses
  s390: cio driver &__get_cpu_var replacements
  s390: Replace __get_cpu_var uses
  mips: Replace __get_cpu_var uses
  MIPS: Replace __get_cpu_var uses in FPU emulator.
  arm: Replace __this_cpu_ptr with raw_cpu_ptr
  ...
2014-10-15 07:48:18 +02:00
Linus Torvalds 47137c6ba1 Merge branch 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
 "Nothing really exciting this time:

   - a few fixlets in the NOHZ code

   - a new ARM SoC timer abomination.  One should expect that we have
     enough of them already, but they insist on inventing new ones.

   - the usual bunch of ARM SoC timer updates.  That feels like herding
     cats"

* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  clocksource: arm_arch_timer: Consolidate arch_timer_evtstrm_enable
  clocksource: arm_arch_timer: Enable counter access for 32-bit ARM
  clocksource: arm_arch_timer: Change clocksource name if CP15 unavailable
  clocksource: sirf: Disable counter before re-setting it
  clocksource: cadence_ttc: Add support for 32bit mode
  clocksource: tcb_clksrc: Sanitize IRQ request
  clocksource: arm_arch_timer: Discard unavailable timers correctly
  clocksource: vf_pit_timer: Support shutdown mode
  ARM: meson6: clocksource: Add Meson6 timer support
  ARM: meson: documentation: Add timer documentation
  clocksource: sh_tmu: Document r8a7779 binding
  clocksource: sh_mtu2: Document r7s72100 binding
  clocksource: sh_cmt: Document SoC specific bindings
  timerfd: Remove an always true check
  nohz: Avoid tick's double reprogramming in highres mode
  nohz: Fix spurious periodic tick behaviour in low-res dynticks mode
2014-10-09 06:35:05 -04:00
Linus Torvalds 8b45bc892e ARM: SoC driver updates for 3.18
These are changes for drivers that are intimately tied to some SoC
 and for some reason could not get merged through the respective
 subsystem maintainer tree.
 
 Most of the new code is for the Keystone Navigator driver, which is
 new base support that is going to be needed for their hardware
 accelerated network driver and other units.
 
 Most of the commits are for moving old code around from at91 and omap
 for things that are done in device drivers nowadays.
 
 - at91: move reset, poweroff, memory and clocksource code into drivers
   directories
 - socfpga: add edac driver (through arm-soc, as requested by Boris)
 - omap: move omap-intc code to drivers/irqchip
 - sunxi: added an RTC driver for sun6i
 - omap: mailbox driver related changes
 - keystone: support for the "Navigator" component
 - versatile: new reboot, led and soc drivers
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIVAwUAVDWWQGCrR//JCVInAQKX7Q//bDkoseKCZsGaXN7vfQ2YhT3SAc52mROV
 YQKdNmtMUrHqDgngATZTx5ogOh1hInnqueFjGGhfMYsHQO1Vj8+odj0r+4jhjuUY
 3YfY+qZ+91tq33JlUOhKn+mfVMdxJc8XarGgR6MSWYkqWVYCtLtBluum7hKm2UJ6
 /e4hd2zzImX5ATwj/LXWLx5eTf1qAVFGWzNUph1DrW+1V5lOu58X4gKwk1QOCVEh
 Pa0GV9oRTkjoswwz9drzjeFtie2yofQ2mygj6QKxg5NsosIF0+B8kJ61Sxwg56Ak
 tF+qn1hGtB2cDQkpxK4o2cZgCELhkh5Aqgol/vZUS1DMBSUEGCV9PPp2eOW83r3B
 0zsTgsShyVcTh7khdpQmHNRigvcc7e69LaAGC4o/RxaZpCU/LUNCQ+/iqVExSE8A
 VNEXr+JNxGxhj3m9KUHuEktdWx1oNvaYR8Rr4RPr6EWR8R6emJ04I7kXInvzhJZL
 HOGh75vSuAU83FrsP8fFRLadoHNVDXylAs38BPfGEMngVpjvwJLgQ3+729CwW+Q4
 +xQXAKSwKfr8xA8eg6wBSbFcwnEW4QwRqFqQ5XPw7zTZkCZbiLtvn3JpI5bH5A5Q
 /d2D+M2vFbB7VbWJBM4etO95eNS/pfhqJhcQh4t0DjXjoW6WqLiHCxhEx8Ogfvop
 /4ckyGvtEOI=
 =POJD
 -----END PGP SIGNATURE-----

Merge tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC driver updates from Arnd Bergmann:
 "These are changes for drivers that are intimately tied to some SoC and
  for some reason could not get merged through the respective subsystem
  maintainer tree.

  Most of the new code is for the Keystone Navigator driver, which is
  new base support that is going to be needed for their hardware
  accelerated network driver and other units.

  Most of the commits are for moving old code around from at91 and omap
  for things that are done in device drivers nowadays.

   - at91: move reset, poweroff, memory and clocksource code into
     drivers directories
   - socfpga: add edac driver (through arm-soc, as requested by Boris)
   - omap: move omap-intc code to drivers/irqchip
   - sunxi: added an RTC driver for sun6i
   - omap: mailbox driver related changes
   - keystone: support for the "Navigator" component
   - versatile: new reboot, led and soc drivers"

* tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (92 commits)
  bus: arm-ccn: Fix spurious warning message
  leds: add device tree bindings for register bit LEDs
  soc: add driver for the ARM RealView
  power: reset: driver for the Versatile syscon reboot
  leds: add a driver for syscon-based LEDs
  drivers/soc: ti: fix build break with modules
  MAINTAINERS: Add Keystone Multicore Navigator drivers entry
  soc: ti: add Keystone Navigator DMA support
  Documentation: dt: soc: add Keystone Navigator DMA bindings
  soc: ti: add Keystone Navigator QMSS driver
  Documentation: dt: soc: add Keystone Navigator QMSS bindings
  rtc: sunxi: Depend on platforms sun4i/sun7i that actually have the rtc
  rtc: sun6i: Add sun6i RTC driver
  irqchip: omap-intc: remove unnecessary comments
  irqchip: omap-intc: correct maximum number or MIR registers
  irqchip: omap-intc: enable TURBO idle mode
  irqchip: omap-intc: enable IP protection
  irqchip: omap-intc: remove unnecesary of_address_to_resource() call
  irqchip: omap-intc: comment style cleanup
  irqchip: omap-intc: minor improvement to omap_irq_pending()
  ...
2014-10-08 17:37:16 -04:00
Nathan Lynch e1ce5c7adc clocksource: arm_arch_timer: Consolidate arch_timer_evtstrm_enable
The arch_timer_evtstrm_enable hooks in arm and arm64 are substantially
similar, the only difference being a CONFIG_COMPAT-conditional section
which is relevant only for arm64.  Copy the arm64 version to the
driver, removing the arch-specific hooks.

Signed-off-by: Nathan Lynch <nathan_lynch@mentor.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Will Deacon <will.deacon@arm.com>
2014-09-29 01:59:26 +02:00
Nathan Lynch 8b8dde0034 clocksource: arm_arch_timer: Enable counter access for 32-bit ARM
The only difference between arm and arm64's implementations of
arch_counter_set_user_access is that 32-bit ARM does not enable user
access to the virtual counter.  We want to enable this access for the
32-bit ARM VDSO, so copy the arm64 version to the driver itself, and
remove the arch-specific implementations.

Signed-off-by: Nathan Lynch <nathan_lynch@mentor.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Will Deacon <will.deacon@arm.com>
2014-09-29 01:59:25 +02:00
Nathan Lynch 423bd69e69 clocksource: arm_arch_timer: Change clocksource name if CP15 unavailable
The arm and arm64 VDSOs need CP15 access to the architected counter.
If this is unavailable (which is allowed by ARM v7), indicate this by
changing the clocksource name to "arch_mem_counter" before registering
the clocksource.

Suggested by Stephen Boyd.

Signed-off-by: Nathan Lynch <nathan_lynch@mentor.com>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Will Deacon <will.deacon@arm.com>
2014-09-29 01:59:24 +02:00
Hao Liu 28cf35675a clocksource: sirf: Disable counter before re-setting it
According to HW spec, we have to disable the counter before setting
it, if we don't this, in pressure test, sometimes the timer might
not generate interrupt any more.

And this patch also fixes a typo for register set by changing 0x7
to 0x3. 0x7 is loop mode in HW, but here we are using oneshot 0x3.

Signed-off-by: Hao Liu <Hao.Liu@csr.com>
Signed-off-by: Barry Song <Baohua.Song@csr.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2014-09-29 01:59:24 +02:00
Michal Simek 4e2bec0c32 clocksource: cadence_ttc: Add support for 32bit mode
New TTCs support 32bit mode. Older versions support
only 16bit modes. Keep 16bit mode as default
and 32bit optional.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2014-09-29 01:59:09 +02:00
Gael Portay 2743f1beb0 clocksource: tcb_clksrc: Sanitize IRQ request
The clock is not unprepared in case of the request IRQ fails.

Also update to request_irq.

Signed-off-by: Gaël PORTAY <gael.portay@gmail.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2014-09-29 01:50:05 +02:00
Sudeep Holla c387f07e62 clocksource: arm_arch_timer: Discard unavailable timers correctly
Currently we wait until both cp15 and mem timers are probed if we
have both timer device nodes present in the device tree without
checking if the device is actually available. If one of the timer
device node present is disabled, the system locks up on the boot
as no timer gets registered.

This patch adds the check for the availability of the timer device
so that unavailable timers are discarded correctly. It also adds
the missing of_node_put.

Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2014-09-29 01:50:05 +02:00
Stefan Agner 04f7e3e513 clocksource: vf_pit_timer: Support shutdown mode
In order to avoid waking up the system in a low power mode, the
clocksource should not generate interrupts anymore. Disable the PIT
timer interrupt when changing into the CLOCK_EVT_MODE_SHUTDOWN mode.

[dlezcano] : remove superfluous empty line

Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Bill Pringlemeir <bpringlemeir@nbsps.com>
2014-09-29 01:50:05 +02:00
Carlo Caione e4a6b37875 ARM: meson6: clocksource: Add Meson6 timer support
Meson6 SoCs are equipped with 5 32-bit timers, called TIMER_A, TIMER_B,
TIMER_C, TIMER_D and TIMER_E.

The driver is providing clocksource support for the 32-bit counter using
TIMER_E. Clockevents are also supported using TIMER_A.

Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Carlo Caione <carlo@caione.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
2014-09-29 01:50:05 +02:00
Maxime Ripard b052ff30cd ARM: at91: PIT: Move the driver to drivers/clocksource
Now that we don't depend on anyting in the mach-at91 directory, we can just
move the driver to where it belongs.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Boris BREZILLON <boris.brezillon@free-electrons.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

Conflicts:
	arch/arm/mach-at91/Kconfig
	arch/arm/mach-at91/Makefile
2014-09-15 17:55:48 +02:00
Gaël PORTAY d07a1ecdfb clocksource: tcb_clksrc: sanitize IRQ request
The clock is not unprepared in case of the request IRQ fails.

Also update to request_irq.

Signed-off-by: Gaël PORTAY <gael.portay@gmail.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-09-08 10:54:03 +02:00
Gaël PORTAY 4930d247af ARM: at91/tclib: move initialization from alloc to probe
Move resource retrieval from atmel_tc_alloc to tc_probe to avoid lately
reporting resource related issues when a TC block user request a TC block.

Moreover, resources retrieval are usually done in the probe function,
thus moving them add some consistency with other drivers.

Initialization is done once, ie not every time a tc block is requested.
If it fails, the device is not appended to the list of tc blocks.

Furhermore, the device id is retrieved at probe as well, avoiding parsing
DT every time the user requests of tc block.

Signed-off-by: Gaël PORTAY <gael.portay@gmail.com>
Acked-by: Thierry Reding <thierry.reding@gmail.com>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-09-08 10:54:03 +02:00
Christoph Lameter 77422a8fee clocksource: Replace __this_cpu_ptr with raw_cpu_ptr
One newly introduced __this_cpu_ptr should be raw_cpu_ptr.

Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2014-08-26 13:45:56 -04:00
Christoph Lameter 27d0516779 drivers/clocksource: Replace __get_cpu_var used for address calculation
Replace __get_cpu_var used for address calculation with this_cpu_ptr.

Acked-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2014-08-26 13:45:46 -04:00
Christoph Lameter 22127e93c5 time: Replace __get_cpu_var uses
Convert uses of __get_cpu_var for creating a address from a percpu
offset to this_cpu_ptr.

The two cases where get_cpu_var is used to actually access a percpu
variable are changed to use this_cpu_read/raw_cpu_read.

Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2014-08-26 13:45:44 -04:00
Linus Torvalds b3345d7c57 ARM: SoC platform changes for 3.17
This is the bulk of new SoC enablement and other platform changes for 3.17:
 
 * Samsung S5PV210 has been converted to DT and multiplatform
 * Clock drivers and bindings for some of the lower-end i.MX 1/2 platforms
 * Kirkwood, one of the popular Marvell platforms, is folded into the
   mvebu platform code, removing mach-kirkwood.
 * Hwmod data for TI AM43xx and DRA7 platforms.
 * More additions of Renesas shmobile platform support
 * Removal of plat-samsung contents that can be removed with S5PV210 being
   multiplatform/DT-enabled and the other two old platforms being removed.
 
 New platforms (most with only basic support right now):
 
 * Hisilicon X5HD2 settop box chipset is introduced
 * Mediatek MT6589 (mobile chipset) is introduced
 * Broadcom BCM7xxx settop box chipset is introduced
 
 + as usual a lot other pieces all over the platform code.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJT5Dp+AAoJEIwa5zzehBx3w1sP/0vjT/LQOmC8Lv8RW2Ley2ua
 hNu3HcNPnT/N40JEdU9YNv3q0fdxGgcfKj011CNN+49zPSUf1xduk2wfCAk9yV50
 8Sbt1PfDGm1YyUugGN420CzI431pPoM1OGXHZHkAmg+2J286RtUi3NckB//QDbCY
 QhEjhpYc9SXhAOCGwmB4ab7thOljOFSPzKTLMTu3+PNI5zRPRgkDkt6w9XlsAYmB
 nuR271BnzsROkMzAjycwaJ3kdim7wqrMRfk8g96o0jHSF5qf4zsT5uWYYAjTxdUQ
 8Ajz6zjeHe4+95TwTDcq+lCX6rDLZgwkvCAc6hFbeg0uR7Dyek0h6XMEYtwdjaiU
 KNPwOENrYdENNDAGRpkFp1x4h/rY9Plfru0bBo5o6t7aPBvmNeCDzRtlTtLiUNDV
 dG8sfDMtrS/wFHVjylDSQ60Mb+wuW0XneC8D7chY/iRhIllUYi6YXXvt+/tH5C20
 oYDOWqqcDFSb0sJhE5pn4KBV82ZaHx9jMBWGLl+erg2sDX/SK8SxOkLqKYZKtKB5
 0leOGE3Y+C70xt3G9HftLz2sAvvt+C8UPsApPT+dHNE401TWJOYx6LphPkQKjeeK
 P1iwKi+It3l+FaBypgJy/LeMQRy7EyvDBK2I5WoVL/R2qq14EmP1ui3Tthjj0bhq
 tBBof6P9c8OnRVj1Lz3R
 =5TJ6
 -----END PGP SIGNATURE-----

Merge tag 'soc-for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC platform changes from Olof Johansson:
 "This is the bulk of new SoC enablement and other platform changes for
  3.17:

   - Samsung S5PV210 has been converted to DT and multiplatform
   - Clock drivers and bindings for some of the lower-end i.MX 1/2
     platforms
   - Kirkwood, one of the popular Marvell platforms, is folded into the
     mvebu platform code, removing mach-kirkwood
   - Hwmod data for TI AM43xx and DRA7 platforms
   - More additions of Renesas shmobile platform support
   - Removal of plat-samsung contents that can be removed with S5PV210
     being multiplatform/DT-enabled and the other two old platforms
     being removed

  New platforms (most with only basic support right now):

   - Hisilicon X5HD2 settop box chipset is introduced
   - Mediatek MT6589 (mobile chipset) is introduced
   - Broadcom BCM7xxx settop box chipset is introduced

  + as usual a lot other pieces all over the platform code"

* tag 'soc-for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (240 commits)
  ARM: hisi: remove smp from machine descriptor
  power: reset: move hisilicon reboot code
  ARM: dts: Add hix5hd2-dkb dts file.
  ARM: debug: Rename Hi3716 to HIX5HD2
  ARM: hisi: enable hix5hd2 SoC
  ARM: hisi: add ARCH_HISI
  MAINTAINERS: add entry for Broadcom ARM STB architecture
  ARM: brcmstb: select GISB arbiter and interrupt drivers
  ARM: brcmstb: add infrastructure for ARM-based Broadcom STB SoCs
  ARM: configs: enable SMP in bcm_defconfig
  ARM: add SMP support for Broadcom mobile SoCs
  Documentation: arm: misc updates to Marvell EBU SoC status
  Documentation: arm: add URLs to public datasheets for the Marvell Armada XP SoC
  ARM: mvebu: fix build without platforms selected
  ARM: mvebu: add cpuidle support for Armada 38x
  ARM: mvebu: add cpuidle support for Armada 370
  cpuidle: mvebu: add Armada 38x support
  cpuidle: mvebu: add Armada 370 support
  cpuidle: mvebu: rename the driver from armada-370-xp to mvebu-v7
  ARM: mvebu: export the SCU address
  ...
2014-08-08 11:14:29 -07:00
Linus Torvalds e7fda6c4c3 Merge branch 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer and time updates from Thomas Gleixner:
 "A rather large update of timers, timekeeping & co

   - Core timekeeping code is year-2038 safe now for 32bit machines.
     Now we just need to fix all in kernel users and the gazillion of
     user space interfaces which rely on timespec/timeval :)

   - Better cache layout for the timekeeping internal data structures.

   - Proper nanosecond based interfaces for in kernel users.

   - Tree wide cleanup of code which wants nanoseconds but does hoops
     and loops to convert back and forth from timespecs.  Some of it
     definitely belongs into the ugly code museum.

   - Consolidation of the timekeeping interface zoo.

   - A fast NMI safe accessor to clock monotonic for tracing.  This is a
     long standing request to support correlated user/kernel space
     traces.  With proper NTP frequency correction it's also suitable
     for correlation of traces accross separate machines.

   - Checkpoint/restart support for timerfd.

   - A few NOHZ[_FULL] improvements in the [hr]timer code.

   - Code move from kernel to kernel/time of all time* related code.

   - New clocksource/event drivers from the ARM universe.  I'm really
     impressed that despite an architected timer in the newer chips SoC
     manufacturers insist on inventing new and differently broken SoC
     specific timers.

[ Ed. "Impressed"? I don't think that word means what you think it means ]

   - Another round of code move from arch to drivers.  Looks like most
     of the legacy mess in ARM regarding timers is sorted out except for
     a few obnoxious strongholds.

   - The usual updates and fixlets all over the place"

* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (114 commits)
  timekeeping: Fixup typo in update_vsyscall_old definition
  clocksource: document some basic timekeeping concepts
  timekeeping: Use cached ntp_tick_length when accumulating error
  timekeeping: Rework frequency adjustments to work better w/ nohz
  timekeeping: Minor fixup for timespec64->timespec assignment
  ftrace: Provide trace clocks monotonic
  timekeeping: Provide fast and NMI safe access to CLOCK_MONOTONIC
  seqcount: Add raw_write_seqcount_latch()
  seqcount: Provide raw_read_seqcount()
  timekeeping: Use tk_read_base as argument for timekeeping_get_ns()
  timekeeping: Create struct tk_read_base and use it in struct timekeeper
  timekeeping: Restructure the timekeeper some more
  clocksource: Get rid of cycle_last
  clocksource: Move cycle_last validation to core code
  clocksource: Make delta calculation a function
  wireless: ath9k: Get rid of timespec conversions
  drm: vmwgfx: Use nsec based interfaces
  drm: i915: Use nsec based interfaces
  timekeeping: Provide ktime_get_raw()
  hangcheck-timer: Use ktime_get_ns()
  ...
2014-08-05 17:46:42 -07:00
Linus Torvalds c489d98c8c Merge branch 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm
Pull ARM updates from Russell King:
 "Included in this update:

   - perf updates from Will Deacon:

     The main changes are callchain stability fixes from Jean Pihet and
     event mapping and PMU name rework from Mark Rutland

     The latter is preparatory work for enabling some code re-use with
     arm64 in the future.

   - updates for nommu from Uwe Kleine-König:

     Two different fixes for the same problem making some ARM nommu
     configurations not boot since 3.6-rc1.  The problem is that
     user_addr_max returned the biggest available RAM address which
     makes some copy_from_user variants fail to read from XIP memory.

   - deprecate legacy OMAP DMA API, in preparation for it's removal.

     The popular drivers have been converted over, leaving a very small
     number of rarely used drivers, which hopefully can be converted
     during the next cycle with a bit more visibility (and hopefully
     people popping out of the woodwork to help test)

   - more tweaks for BE systems, particularly with the kernel image
     format.  In connection with this, I've cleaned up the way we
     generate the linker script for the decompressor.

   - removal of hard-coded assumptions of the kernel stack size, making
     everywhere depend on the value of THREAD_SIZE_ORDER.

   - MCPM updates from Nicolas Pitre.

   - Make it easier for proper CPU part number checks (which should
     always include the vendor field).

   - Assembly code optimisation - use the "bx" instruction when
     returning from a function on ARMv6+ rather than "mov pc, reg".

   - Save the last kernel misaligned fault location and report it via
     the procfs alignment file.

   - Clean up the way we create the initial stack frame, which is a
     repeated pattern in several different locations.

   - Support for 8-byte get_user(), needed for some DRM implementations.

   - mcs locking from Will Deacon.

   - Save and restore a few more Cortex-A9 registers (for errata
     workarounds)

   - Fix various aspects of the SWP emulation, and the ELF hwcap for the
     SWP instruction.

   - Update LPAE logic for pte_write and pmd_write to make it more
     correct.

   - Support for Broadcom Brahma15 CPU cores.

   - ARM assembly crypto updates from Ard Biesheuvel"

* 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: (53 commits)
  ARM: add comments to the early page table remap code
  ARM: 8122/1: smp_scu: enable SCU standby support
  ARM: 8121/1: smp_scu: use macro for SCU enable bit
  ARM: 8120/1: crypto: sha512: add ARM NEON implementation
  ARM: 8119/1: crypto: sha1: add ARM NEON implementation
  ARM: 8118/1: crypto: sha1/make use of common SHA-1 structures
  ARM: 8113/1: remove remaining definitions of PLAT_PHYS_OFFSET from <mach/memory.h>
  ARM: 8111/1: Enable erratum 798181 for Broadcom Brahma-B15
  ARM: 8110/1: do CPU-specific init for Broadcom Brahma15 cores
  ARM: 8109/1: mm: Modify pte_write and pmd_write logic for LPAE
  ARM: 8108/1: mm: Introduce {pte,pmd}_isset and {pte,pmd}_isclear
  ARM: hwcap: disable HWCAP_SWP if the CPU advertises it has exclusives
  ARM: SWP emulation: only initialise on ARMv7 CPUs
  ARM: SWP emulation: always enable when SMP is enabled
  ARM: 8103/1: save/restore Cortex-A9 CP15 registers on suspend/resume
  ARM: 8098/1: mcs lock: implement wfe-based polling for MCS locking
  ARM: 8091/2: add get_user() support for 8 byte types
  ARM: 8097/1: unistd.h: relocate comments back to place
  ARM: 8096/1: Describe required sort order for textofs-y (TEXT_OFFSET)
  ARM: 8090/1: add revision info for PL310 errata 588369 and 727915
  ...
2014-08-05 10:05:29 -07:00
Doug Anderson 3252a646aa clocksource: exynos_mct: Only use 32-bits where possible
The MCT has a nice 64-bit counter.  That means that we _can_ register
as a 64-bit clocksource and sched_clock.  ...but that doesn't mean we
should.

The 64-bit counter is read by reading two 32-bit registers.  That
means reading needs to be something like:
- Read upper half
- Read lower half
- Read upper half and confirm that it hasn't changed.

That wouldn't be terrible, but:
- THe MCT isn't very fast to access (hundreds of nanoseconds).
- The clocksource is queried _all the time_.

In total system profiles of real workloads on ChromeOS, we've seen
exynos_frc_read() taking 2% or more of CPU time even after optimizing
the 3 reads above to 2 (see below).

The MCT is clocked at ~24MHz on all known systems.  That means that
the 32-bit half of the counter rolls over every ~178 seconds.  This
inspired an optimization in ChromeOS to cache the upper half between
calls, moving 3 reads to 2.  ...but we can do better!  Having a 32-bit
timer that flips every 178 seconds is more than sufficient for Linux.
Let's just use the lower half of the MCT.

Times on 5420 to do 1000000 gettimeofday() calls from userspace:
* Original code:                      1323852 us
* ChromeOS cache upper half:          1173084 us
* ChromeOS + ldmia to optimize:       1045674 us
* Use lower 32-bit only (this code):  1014429 us

As you can see, the time used doesn't increase linearly with the
number of reads and we can make 64-bit work almost as fast as 32-bit
with a bit of assembly code.  But since there's no real gain for
64-bit, let's go with the simplest and fastest implementation.

Note: with this change roughly half the time for gettimeofday() is
spent in exynos_frc_read().  The rest is timer / system call overhead.

Also note: this patch disables the use of the MCT on ARM64 systems
until we've sorted out how to make "cycles_t" always 32-bit.  Really
ARM64 systems should be using arch timers anyway.

Signed-off-by: Doug Anderson <dianders@chromium.org>
Acked-by Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2014-07-23 12:02:41 +02:00
Doug Anderson fdb06f66d5 clocksource: exynos_mct: Use readl_relaxed/writel_relaxed
Using the __raw functions is discouraged.  Update the file to
consistently use the proper functions.

Signed-off-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2014-07-23 12:02:40 +02:00
Robert Jarzmik ab5354c48d clocksource: pxa: Add device-tree support for PXA timer
Add device-tree support to PXA platforms.
The driver still needs to maintain backward non device-tree
compatibility as well, which implies :
 - a non device-tree init function
 - a static registers base address in the driver

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2014-07-23 12:02:37 +02:00
Robert Jarzmik c5421d7aa4 clocksource: pxa: Move PXA timer to clocksource framework
Move time.c from arch/arm/mach-pxa/time.c to
drivers/clocksource/pxa_timer.c.

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2014-07-23 12:02:37 +02:00
Alexander Shiyan f0b7fabec3 clocksource: clps711x: Add CLPS711X clocksource driver
This adds the clocksource driver for Cirrus Logic CLPS711X series SoCs.
Designed primarily for migration CLPS711X subarch for multiplatform & DT,
for this as the "OF" and "non-OF" calls implemented.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2014-07-23 12:02:35 +02:00
Zhiwu Song 38941522ec clocksource: sirf: Fix incorrect clock enable counter for timer
In the clocksource driver, we didn't explicitly enable the clock. it makes the
clk reference counter wrong. We didn't encounter any hang issue because the
tick's clock input has been open and is shared by some other hardware
components, but if we don't enable those components in kernel, in the stage of
disabling unused clk in kernel boot, Linux tick hangs.

This patch fixes it. it does an explicit prepare and enable to the clock input,
and increases the usage counter of the clk.

Signed-off-by: Zhiwu Song <Zhiwu.Song@csr.com>
Signed-off-by: Barry Song <Baohua.Song@csr.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2014-07-23 12:02:34 +02:00
Chen Gang 40c96312dc clocksource: Kconfig: Let EM_TIMER_STI depend on HAS_IOMEM
In 'em_sti.c', it will call devm_ioremap_resource() which need
HAS_IOMEM. So need let EM_TIMER_STI depend on HAS_IOMEM, too.

The related error (with allmodconfig under score):

  LD      init/built-in.o
em_sti.c:(.text.em_sti_probe+0x84): undefined reference to `devm_ioremap_resource'
make: *** [vmlinux] Error 1

Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2014-07-23 12:02:33 +02:00
Matthias Brugger ecb3530dd5 clocksource: Add support for the Mediatek SoCs
This patch adds a clock source and clock event for the timer found
on the Mediatek SoCs.

The Mediatek General Purpose Timer block provides five 32 bit timers and
one 64 bit timer.

Two 32 bit timers are used by this driver:
TIMER1: clock events supporting periodic and oneshot events
TIMER2: clock source configured as a free running counter

The General Purpose Timer block can be run with two clocks. A 13 MHz system
clock and the RTC clock running at 32 KHz. This implementation uses the system
clock with no clock source divider.

The interrupts are shared between the different timers and have to be read back
from a register. We just enable one interrupt for the clock event. The clock
event timer is used by all cores.

Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2014-07-23 12:02:31 +02:00
Kuninori Morimoto 7e1391876c clocksource: sh_mtu2: Tidy up Kconfig typo for MTU2
It should be "MTU2" instead of "TMU2"

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Wolfram Sang <wsa@sang-engineering.com>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2014-07-23 12:02:29 +02:00
Daniel Lezcano de2ea58155 Merge branch 'clockevents/renesas-timers-dt' into clockevents/3.17 2014-07-23 12:00:00 +02:00
Olof Johansson f37ac9e5a4 exynos cpuidle update for v3.17
- add callbacks exynos_suspend() and exynos_powered_up()
   for support cpuidle through mcpm
 - skip exynos_cpuidle for exynos5420 because is uses
   cpuidle-big-liggle generic cpuidle driver
 - add generic functions to calculate cpu number is used
   for pmu and this is required for exynos5420 multi-cluster
 - add of_device_id structure for big.LITTLE cpuidle and
   add "samsung,exynos5420" compatible string for exynos5420
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJTybYIAAoJEA0Cl+kVi2xqcmsP/Au37R0j1B8KpZ4scUBTczHJ
 t/oucJ3N2y7vSNdqZ21izolKQjl94NAidpzeaL0lXmthoAhdc8ESwMK8Nd9TR27r
 qJyu+FiXQFhZy9NbaKbkvl27bzfRJPaBQzDAPM6HvExP5p0aIUCGXu9mDUb6koe4
 Zm344G5az7iooRkerPw6SrswiJ6BJ6R4elkFGsZLDTRhLWoZ36PG2puRuEk6lVO7
 X7bsyvbx+Go6ru4KUvMRBIoMUDRDL0NbIFq0p8Q6naEbHSucYAo9MfHYJ/Hux/9B
 G7UoVwLjPyR2jbAYIn6XyDjWKvPEL1FwwuY1OwJ/oIa32yD0LQ1d6dEX7Px5z4Ts
 6lpTeaFKPuDLz2VN+WuRyTySnJ3cD4RihagNSTpTIMmvk0k2tPwtXhvhTkP73Gsb
 fV11rywmyMbdcBvRawN7DmSz10iSoF6VLsMF3WBcaNDBzbthRNMmHc2twbkBo0T+
 lxyHvstwD78vrYODLX6lelfsru1RPwaIFFj/sTSaGibLR+I8Xq2MKPpZeO8lUwAJ
 u057QCBDmVvwkBc40HRnjBvP+RjJp3+jnaB3GVplPkOaSmhEtRQezyHKEzbT0LoW
 n9l4UbnmV8QeiWRtFfI4qK43ZTp4Eq6b/CE7qIrDG1zTofJK3ySuo7/t2wm5HMTQ
 GJNJpPl6GweryKVDlJ0M
 =jkc2
 -----END PGP SIGNATURE-----

Merge tag 'exynos-cpuidle' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/soc

Merge "Samsung exynos cpuidle update for v3.17" from Kukjin Kim:

- add callbacks exynos_suspend() and exynos_powered_up()
  for support cpuidle through mcpm
- skip exynos_cpuidle for exynos5420 because is uses
  cpuidle-big-liggle generic cpuidle driver
- add generic functions to calculate cpu number is used
  for pmu and this is required for exynos5420 multi-cluster
- add of_device_id structure for big.LITTLE cpuidle and
  add "samsung,exynos5420" compatible string for exynos5420

* tag 'exynos-cpuidle' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
  ARM: EXYNOS: populate suspend and powered_up callbacks for mcpm
  ARM: EXYNOS: do not allow cpuidle registration for exynos5420
  cpuidle: big.LITTLE: init driver for exynos5420
  cpuidle: big.LITTLE: Add ARCH_EXYNOS entry in config
  ARM: EXYNOS: add generic function to calculate cpu number
  cpuidle: big.LITTLE: add of_device_id structure
  + Linux 3.16-rc5

Signed-off-by: Olof Johansson <olof@lixom.net>
2014-07-19 15:03:08 -07:00
Russell King af040ffc9b ARM: make it easier to check the CPU part number correctly
Ensure that platform maintainers check the CPU part number in the right
manner: the CPU part number is meaningless without also checking the
CPU implement(e|o)r (choose your preferred spelling!)  Provide an
interface which returns both the implementer and part number together,
and update the definitions to include the implementer.

Mark the old function as being deprecated... indeed, using the old
function with the definitions will now always evaluate as false, so
people must update their un-merged code to the new function.  While
this could be avoided by adding new definitions, we'd also have to
create new names for them which would be awkward.

Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-07-18 12:29:02 +01:00
Thomas Gleixner afdb094380 Linux 3.16-rc5
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJTwvRvAAoJEHm+PkMAQRiG8CoIAJucWkj+MJFFoDXjR9hfI8U7
 /WeQLJP0GpWGMXd2KznX9epCuw5rsuaPAxCy1HFDNOa7OtNYacWrsIhByxOIDLwL
 YjDB9+fpMMPFWsr+LPJa8Ombh/TveCS77w6Pt5VMZFwvIKujiNK/C3MdxjReH5Gr
 iTGm8x7nEs2D6L2+5sQVlhXot/97phxIlBSP6wPXEiaztNZ9/JZi905Xpgq+WU16
 ZOA8MlJj1TQD4xcWyUcsQ5REwIOdQ6xxPF00wv/12RFela+Puy4JLAilnV6Mc12U
 fwYOZKbUNBS8rjfDDdyX3sljV1L5iFFqKkW3WFdnv/z8ZaZSo5NupWuavDnifKw=
 =6Q8o
 -----END PGP SIGNATURE-----

Merge tag 'v3.16-rc5' into timers/core

Reason: Bring in upstream modifications, so the pending changes which
depend on them can be queued.
2014-07-16 21:57:38 +02:00
Olof Johansson b040614c5b ARM: tegra: use us counter as delay timer
Tegra has a micro-second counter whose rate doesn't vary with cpufreq
 changes. Register it so it can be used as the delay timer, so delays
 aren't influenced by cpufreq.
 
 I've made this a separate branch since it touches a few files outside
 arch/arm/mach-tegra/. This can be merged anywhere that conflicts need
 to be resolved, although I know of no such places at present.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJTqJo3AAoJEMzrak5tbycxUbkP/1Rx2GqGYG2pvsQDEXuHGVJn
 3WuFRC7kvc1A/4smpSs+1UhZMwbyewCcdEYbCSjI28UVcYokdRnWAgYrPit3Q0VB
 8RGuqDXyW7nYJrRdwpeSddBlt+lW273nn1hz6BB5tvKYr+5IR8iUqkMB6e8Ri2cV
 QNG0H4/+OKvnlM6Mfk0yZ2F12ZmUdey0j7mEhzHNtxZhN3JXm5g+Ta58knRibkCO
 EJNip5nlZg6d07GAHkEtiegLPTfNsnBDh9RyiMq/FHb0NJ6WZxvCizesFg1Ph2rW
 QVjShShivEXB5F/7bNVmMlsySGWA6WTiWYCvZ+GB4Jf6HMLTv0ekyTP28pJdeaMN
 2A8Si4MueWx1E5sUPbHJznsk/zbB7A2Xgb+h59M3FyAbKNqMCf141cAg6YrPHkee
 I50H4G4xe2KwKRM01ErwRqOU3MEsPiJ/8CBgseEZ8G71SMj4cGvGglKj9cr6V4hC
 SzAyDkctJD9QNMozp6nyhhGEJ76WaNsvBV9FjqmthiRhTtRbusapyGle/tx5f0IP
 ieS3vlt7WGeLFJQ9NkuOI9Dn1p7KDlWSbCgjm3dFVYlCZyiGeJf7L6GzGvePBhOB
 eQ3O4zIXnjuW+HXOU9bEWU3yavviFewmf7IdygdjrYymq46KmDCT6fhxFppnSWTA
 SIbgbOwiZHD63RQSuYFv
 =flbE
 -----END PGP SIGNATURE-----

Merge tag 'tegra-for-3.17-delay-timer' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/soc

Merge "ARM: tegra: use us counter as delay timer" from Stephen Warren:

Tegra has a micro-second counter whose rate doesn't vary with cpufreq
changes. Register it so it can be used as the delay timer, so delays
aren't influenced by cpufreq.

* tag 'tegra-for-3.17-delay-timer' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  clocksource: tegra: Use us counter as delay timer
  ARM: choose highest resolution delay timer
  kernel: add calibration_delay_done()

Signed-off-by: Olof Johansson <olof@lixom.net>
2014-07-06 17:47:28 -07:00
Amit Daniel Kachhap 8bf13a4346 clocksource: exynos_mct: Register the timer for stable udelay
This patch registers the exynos mct clocksource as the current timer
as it has constant clock rate. This will generate correct udelay for
the exynos platform and avoid using unnecessary calibrated
jiffies. This change has been tested on exynos5420 based board and
udelay is very close to expected.

Without this patch udelay() on exynos5400 / exynos5800 is wildly
inaccurate due to big.LITTLE not adjusting loops_per_jiffy correctly.
Also without this patch udelay() on exynos5250 can be innacruate
during transitions between frequencies < 800 MHz (you'll go 200 MHz ->
800 MHz -> 300 MHz and will run at 800 MHz for a time with the wrong
loops_per_jiffy).

[dianders: reworked and created version 3]

Signed-off-by: Amit Daniel Kachhap <amit.daniel@samsung.com>
Signed-off-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-07-05 06:40:23 +09:00
Doug Anderson 89e6a13b88 clocksource: exynos_mct: Fix ftrace
In (93bfb76 clocksource: exynos_mct: register sched_clock callback) we
supported using the MCT as a scheduler clock.  We properly marked
exynos4_read_sched_clock() as notrace.  However, we then went and
called another function that _wasn't_ notrace.  That means if you do:

  cd /sys/kernel/debug/tracing/
  echo function_graph > current_tracer

You'll get a crash.

Fix this (but still let other readers of the MCT be trace-enabled) by
adding an extra function.  It's important to keep other users of MCT
traceable because the MCT is actually quite slow to access and we want
exynos4_frc_read() to show up in ftrace profiles if it's the
bottleneck.

Signed-off-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-07-05 06:38:55 +09:00
Laurent Pinchart cca8d0596c clocksource: sh_mtu2: Add DT support
Document DT bindings and parse them in the MTU2 driver.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Wolfram Sang <wsa@sang-engineering.com>
2014-07-04 15:50:29 +02:00
Laurent Pinchart 3e29b5543f clocksource: sh_tmu: Add DT support
Document DT bindings and parse them in the TMU driver.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Simon Horman <horms+renesas@verge.net.au>
2014-07-04 15:50:28 +02:00
Laurent Pinchart 1768aa2f4c clocksource: sh_cmt: Add DT support
Document DT bindings and parse them in the CMT driver.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Simon Horman <horms+renesas@verge.net.au>
2014-07-04 15:46:17 +02:00
Laurent Pinchart 8b2463d8ca clocksource: sh_mtu2: Replace global spinlock with a per-device spinlock
The global spinlock is used to protect the shared start/stop register.
Now that all MTU2 channels are handled by a single device instance, use
a per-device spinlock.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Wolfram Sang <wsa@sang-engineering.com>
2014-07-02 16:01:50 +02:00
Laurent Pinchart 1a5da0e43b clocksource: sh_mtu2: Drop support for legacy platform data
Now that all platforms have switched to the new-style platform data,
drop support for the legacy version.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Wolfram Sang <wsa@sang-engineering.com>
2014-07-02 16:01:50 +02:00
Laurent Pinchart 2b027f1f0f clocksource: sh_tmu: Replace global spinlock with a per-device spinlock
The global spinlock is used to protect the shared start/stop register.
Now that all TMU channels are handled by a single device instance, use a
per-device spinlock.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Simon Horman <horms+renesas@verge.net.au>
2014-07-02 16:01:49 +02:00
Laurent Pinchart 681b9e852c clocksource: sh_tmu: Drop support for legacy platform data
Now that all platforms have switched to the new-style platform data,
drop support for the legacy version.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Simon Horman <horms+renesas@verge.net.au>
2014-07-02 16:01:49 +02:00
Laurent Pinchart de599c8843 clocksource: sh_cmt: Replace global spinlock with a per-device spinlock
The global spinlock is used to protect the shared start/stop register.
Now that all CMT channels are handled by a single device instance, use a
per-device spinlock.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Simon Horman <horms+renesas@verge.net.au>
2014-07-02 16:01:48 +02:00
Laurent Pinchart 31e912f598 clocksource: sh_cmt: Drop support for legacy platform data
Now that all platforms have switched to the new-style platform data,
drop support for the legacy version.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Simon Horman <horms+renesas@verge.net.au>
2014-07-02 16:01:48 +02:00
Jean Delvare 58394271c6 clocksource: Add a Kconfig menu
Move the clocksource Kconfig entries into their own menu, so that they
don't pollute the main device driver menu.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: http://lkml.kernel.org/r/20140616114845.343e9960@endymion.delvare
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-06-21 22:32:42 +02:00
Peter De Schrijver 0ff36b4f47 clocksource: tegra: Use us counter as delay timer
All Tegra SoCs have a freerunning microsecond counter which can be used as a
delay timer.

Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-06-16 12:48:12 -06:00
Chirantan Ekbote 1d80415db6 clocksource: exynos_mct: Don't reset the counter during boot and resume
Unfortunately on some exynos systems, resetting the mct counter also
resets the architected timer counter.  This can cause problems if the
architected timer driver has already been initialized because the kernel
will think that the counter has wrapped around, causing a big jump in
printk timestamps and delaying any scheduled clock events until the
counter reaches the value it had before it was reset.

The kernel code makes no assumptions about the initial value of the mct
counter so there is no reason from a software perspective to clear the
counter before starting it.  This also fixes the problems described in
the previous paragraph.

Cc: Olof Johansson <olof@lixom.net>
Cc: Tomasz Figa <tomasz.figa@gmail.com>
Signed-off-by: Chirantan Ekbote <chirantan@chromium.org>
Reviewed-by: Doug Anderson <dianders@chromium.org>
Tested-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-06-17 00:23:29 +09:00
Linus Torvalds 82e627eb5e Merge branch 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into next
Pull timer core updates from Thomas Gleixner:
 "This time you get nothing really exciting:
   - A huge update to the sh* clocksource drivers
   - Support for two more ARM SoCs
   - Removal of the deprecated setup_sched_clock() API
   - The usual pile of fixlets all over the place"

* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
  clocksource: Add Freescale FlexTimer Module (FTM) timer support
  ARM: dts: vf610: Add Freescale FlexTimer Module timer node.
  clocksource: ftm: Add FlexTimer Module (FTM) Timer devicetree Documentation
  clocksource: sh_tmu: Remove unnecessary OOM messages
  clocksource: sh_mtu2: Remove unnecessary OOM messages
  clocksource: sh_cmt: Remove unnecessary OOM messages
  clocksource: em_sti: Remove unnecessary OOM messages
  clocksource: dw_apb_timer_of: Do not trace read_sched_clock
  clocksource: Fix clocksource_mmio_readX_down
  clocksource: Fix type confusion for clocksource_mmio_readX_Y
  clocksource: sh_tmu: Fix channel IRQ retrieval in legacy case
  clocksource: qcom: Implement read_current_timer for udelay
  ntp: Make is_error_status() use its argument
  ntp: Convert simple_strtol to kstrtol
  timer_stats/doc: Fix /proc/timer_stats documentation
  sched_clock: Remove deprecated setup_sched_clock() API
  ARM: sun6i: a31: Add support for the High Speed Timers
  clocksource: sun5i: Add support for reset controller
  clocksource: efm32: use $vendor,$device scheme for compatible string
  KConfig: Vexpress: build the ARM_GLOBAL_TIMER with vexpress platform
  ...
2014-06-04 15:57:20 -07:00