Commit graph

926 commits

Author SHA1 Message Date
Paul E. McKenney
910e12092e rcu: Make synchronize_rcu() fast path update ->gp_seq counters
This commit causes the early boot single-CPU synchronize_rcu() fastpath to
update the rcu_state and rcu_node structures' ->gp_seq and ->gp_seq_needed
counters.  This will allow the full-state polled grace-period APIs to
detect all normal grace periods without the need to track the special
combined polling-only counter, which is a step towards removing the
->rgos_polled field from the rcu_gp_oldstate, thereby reducing its size
by one third.

Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2022-08-31 05:09:21 -07:00
Paul E. McKenney
5f11bad6b7 rcu-tasks: Remove grace-period fast-path rcu-tasks helper
Now that the grace-period fast path can only happen during the
pre-scheduler portion of early boot, this fast path can no longer block
run-time RCU Tasks and RCU Tasks Trace grace periods.  This commit
therefore removes the conditional cond_resched_tasks_rcu_qs() invocation.

Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2022-08-31 05:08:08 -07:00
Paul E. McKenney
a5d1b0b68a rcu: Set rcu_data structures' initial ->gpwrap value to true
It would be good do reduce the size of the rcu_gp_oldstate structure
from three unsigned long instances to two, but this requires that the
boot-time optimized grace periods update the various ->gp_seq fields.
Updating these fields in the rcu_state structure and in all of the
rcu_node structures is at least semi-reasonable, but updating them in
all of the rcu_data structures is a bridge too far.  This means that if
there are too many early boot-time grace periods, the ->gp_seq field in
the rcu_data structure cannot be trusted.  This commit therefore sets
each rcu_data structure's ->gpwrap field to provide the necessary impetus
for a suitable level of distrust.

Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2022-08-31 05:08:08 -07:00
Paul E. McKenney
258f887aba rcu: Disable run-time single-CPU grace-period optimization
The run-time single-CPU grace-period optimization applies only to
kernels built with CONFIG_SMP=y && CONFIG_PREEMPTION=y that are running
on a single-CPU system.  But a kernel intended for a single-CPU system
should instead be built with CONFIG_SMP=n, and in any case, single-CPU
systems running Linux no longer appear to be the common case.  Plus this
optimization results in the rcu_gp_oldstate structure being half again
larger than it needs to be.

This commit therefore disables the run-time single-CPU grace-period
optimization, so that this optimization applies only during the
pre-scheduler portion of the boot sequence.

Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2022-08-31 05:08:08 -07:00
Paul E. McKenney
b6fe4917ae rcu: Add full-sized polling for cond_sync_full()
The cond_synchronize_rcu() API compresses the combined expedited and
normal grace-period states into a single unsigned long, which conserves
storage, but can miss grace periods in certain cases involving overlapping
normal and expedited grace periods.  Missing the occasional grace period
is usually not a problem, but there are use cases that care about each
and every grace period.

This commit therefore adds yet another member of the full-state RCU
grace-period polling API, which is the cond_synchronize_rcu_full()
function.  This uses up to three times the storage (rcu_gp_oldstate
structure instead of unsigned long), but is guaranteed not to miss
grace periods.

[ paulmck: Apply feedback from kernel test robot and Julia Lawall. ]

Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2022-08-31 05:08:08 -07:00
Paul E. McKenney
f21e014345 rcu: Remove blank line from poll_state_synchronize_rcu() docbook header
This commit removes the blank line preceding the oldstate parameter to
the docbook header for the poll_state_synchronize_rcu() function and
marks uses of this parameter later in that header.

Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2022-08-31 05:08:08 -07:00
Paul E. McKenney
76ea364161 rcu: Add full-sized polling for start_poll()
The start_poll_synchronize_rcu() API compresses the combined expedited and
normal grace-period states into a single unsigned long, which conserves
storage, but can miss grace periods in certain cases involving overlapping
normal and expedited grace periods.  Missing the occasional grace period
is usually not a problem, but there are use cases that care about each
and every grace period.

This commit therefore adds the next member of the full-state RCU
grace-period polling API, namely the start_poll_synchronize_rcu_full()
function.  This uses up to three times the storage (rcu_gp_oldstate
structure instead of unsigned long), but is guaranteed not to miss
grace periods.

Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2022-08-31 05:08:08 -07:00
Paul E. McKenney
3fdefca9b4 rcu: Add full-sized polling for get_state()
The get_state_synchronize_rcu() API compresses the combined expedited and
normal grace-period states into a single unsigned long, which conserves
storage, but can miss grace periods in certain cases involving overlapping
normal and expedited grace periods.  Missing the occasional grace period
is usually not a problem, but there are use cases that care about each
and every grace period.

This commit therefore adds the next member of the full-state RCU
grace-period polling API, namely the get_state_synchronize_rcu_full()
function.  This uses up to three times the storage (rcu_gp_oldstate
structure instead of unsigned long), but is guaranteed not to miss
grace periods.

Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2022-08-31 05:08:07 -07:00
Paul E. McKenney
91a967fd69 rcu: Add full-sized polling for get_completed*() and poll_state*()
The get_completed_synchronize_rcu() and poll_state_synchronize_rcu()
APIs compress the combined expedited and normal grace-period states into a
single unsigned long, which conserves storage, but can miss grace periods
in certain cases involving overlapping normal and expedited grace periods.
Missing the occasional grace period is usually not a problem, but there
are use cases that care about each and every grace period.

This commit therefore adds the first members of the full-state RCU
grace-period polling API, namely the get_completed_synchronize_rcu_full()
and poll_state_synchronize_rcu_full() functions.  These use up to three
times the storage (rcu_gp_oldstate structure instead of unsigned long),
but which are guaranteed not to miss grace periods, at least in situations
where the single-CPU grace-period optimization does not apply.

Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2022-08-31 05:08:07 -07:00
Linus Torvalds
6614a3c316 - The usual batches of cleanups from Baoquan He, Muchun Song, Miaohe
Lin, Yang Shi, Anshuman Khandual and Mike Rapoport
 
 - Some kmemleak fixes from Patrick Wang and Waiman Long
 
 - DAMON updates from SeongJae Park
 
 - memcg debug/visibility work from Roman Gushchin
 
 - vmalloc speedup from Uladzislau Rezki
 
 - more folio conversion work from Matthew Wilcox
 
 - enhancements for coherent device memory mapping from Alex Sierra
 
 - addition of shared pages tracking and CoW support for fsdax, from
   Shiyang Ruan
 
 - hugetlb optimizations from Mike Kravetz
 
 - Mel Gorman has contributed some pagealloc changes to improve latency
   and realtime behaviour.
 
 - mprotect soft-dirty checking has been improved by Peter Xu
 
 - Many other singleton patches all over the place
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCYuravgAKCRDdBJ7gKXxA
 jpqSAQDrXSdII+ht9kSHlaCVYjqRFQz/rRvURQrWQV74f6aeiAD+NHHeDPwZn11/
 SPktqEUrF1pxnGQxqLh1kUFUhsVZQgE=
 =w/UH
 -----END PGP SIGNATURE-----

Merge tag 'mm-stable-2022-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull MM updates from Andrew Morton:
 "Most of the MM queue. A few things are still pending.

  Liam's maple tree rework didn't make it. This has resulted in a few
  other minor patch series being held over for next time.

  Multi-gen LRU still isn't merged as we were waiting for mapletree to
  stabilize. The current plan is to merge MGLRU into -mm soon and to
  later reintroduce mapletree, with a view to hopefully getting both
  into 6.1-rc1.

  Summary:

   - The usual batches of cleanups from Baoquan He, Muchun Song, Miaohe
     Lin, Yang Shi, Anshuman Khandual and Mike Rapoport

   - Some kmemleak fixes from Patrick Wang and Waiman Long

   - DAMON updates from SeongJae Park

   - memcg debug/visibility work from Roman Gushchin

   - vmalloc speedup from Uladzislau Rezki

   - more folio conversion work from Matthew Wilcox

   - enhancements for coherent device memory mapping from Alex Sierra

   - addition of shared pages tracking and CoW support for fsdax, from
     Shiyang Ruan

   - hugetlb optimizations from Mike Kravetz

   - Mel Gorman has contributed some pagealloc changes to improve
     latency and realtime behaviour.

   - mprotect soft-dirty checking has been improved by Peter Xu

   - Many other singleton patches all over the place"

 [ XFS merge from hell as per Darrick Wong in

   https://lore.kernel.org/all/YshKnxb4VwXycPO8@magnolia/ ]

* tag 'mm-stable-2022-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (282 commits)
  tools/testing/selftests/vm/hmm-tests.c: fix build
  mm: Kconfig: fix typo
  mm: memory-failure: convert to pr_fmt()
  mm: use is_zone_movable_page() helper
  hugetlbfs: fix inaccurate comment in hugetlbfs_statfs()
  hugetlbfs: cleanup some comments in inode.c
  hugetlbfs: remove unneeded header file
  hugetlbfs: remove unneeded hugetlbfs_ops forward declaration
  hugetlbfs: use helper macro SZ_1{K,M}
  mm: cleanup is_highmem()
  mm/hmm: add a test for cross device private faults
  selftests: add soft-dirty into run_vmtests.sh
  selftests: soft-dirty: add test for mprotect
  mm/mprotect: fix soft-dirty check in can_change_pte_writable()
  mm: memcontrol: fix potential oom_lock recursion deadlock
  mm/gup.c: fix formatting in check_and_migrate_movable_page()
  xfs: fail dax mount if reflink is enabled on a partition
  mm/memcontrol.c: remove the redundant updating of stats_flush_threshold
  userfaultfd: don't fail on unrecognized features
  hugetlb_cgroup: fix wrong hugetlb cgroup numa stat
  ...
2022-08-05 16:32:45 -07:00
Paul E. McKenney
34bc7b454d Merge branch 'ctxt.2022.07.05a' into HEAD
ctxt.2022.07.05a: Linux-kernel memory model development branch.
2022-07-21 17:46:18 -07:00
Paul E. McKenney
d38c8fe483 Merge branches 'doc.2022.06.21a', 'fixes.2022.07.19a', 'nocb.2022.07.19a', 'poll.2022.07.21a', 'rcu-tasks.2022.06.21a' and 'torture.2022.06.21a' into HEAD
doc.2022.06.21a: Documentation updates.
fixes.2022.07.19a: Miscellaneous fixes.
nocb.2022.07.19a: Callback-offload updates.
poll.2022.07.21a: Polled grace-period updates.
rcu-tasks.2022.06.21a: Tasks RCU updates.
torture.2022.06.21a: Torture-test updates.
2022-07-21 17:43:16 -07:00
Paul E. McKenney
d96c52fe49 rcu: Add polled expedited grace-period primitives
This commit adds expedited grace-period functionality to RCU's polled
grace-period API, adding start_poll_synchronize_rcu_expedited() and
cond_synchronize_rcu_expedited(), which are similar to the existing
start_poll_synchronize_rcu() and cond_synchronize_rcu() functions,
respectively.

Note that although start_poll_synchronize_rcu_expedited() can be invoked
very early, the resulting expedited grace periods are not guaranteed
to start until after workqueues are fully initialized.  On the other
hand, both synchronize_rcu() and synchronize_rcu_expedited() can also
be invoked very early, and the resulting grace periods will be taken
into account as they occur.

[ paulmck: Apply feedback from Neeraj Upadhyay. ]

Link: https://lore.kernel.org/all/20220121142454.1994916-1-bfoster@redhat.com/
Link: https://docs.google.com/document/d/1RNKWW9jQyfjxw2E8dsXVTdvZYh0HnYeSHDKog9jhdN8/edit?usp=sharing
Cc: Brian Foster <bfoster@redhat.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Ian Kent <raven@themaw.net>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2022-07-21 17:41:56 -07:00
Paul E. McKenney
dd04140531 rcu: Make polled grace-period API account for expedited grace periods
Currently, this code could splat:

	oldstate = get_state_synchronize_rcu();
	synchronize_rcu_expedited();
	WARN_ON_ONCE(!poll_state_synchronize_rcu(oldstate));

This situation is counter-intuitive and user-unfriendly.  After all, there
really was a perfectly valid full grace period right after the call to
get_state_synchronize_rcu(), so why shouldn't poll_state_synchronize_rcu()
know about it?

This commit therefore makes the polled grace-period API aware of expedited
grace periods in addition to the normal grace periods that it is already
aware of.  With this change, the above code is guaranteed not to splat.

Please note that the above code can still splat due to counter wrap on the
one hand and situations involving partially overlapping normal/expedited
grace periods on the other.  On 64-bit systems, the second is of course
much more likely than the first.  It is possible to modify this approach
to prevent overlapping grace periods from causing splats, but only at
the expense of greatly increasing the probability of counter wrap, as
in within milliseconds on 32-bit systems and within minutes on 64-bit
systems.

This commit is in preparation for polled expedited grace periods.

Link: https://lore.kernel.org/all/20220121142454.1994916-1-bfoster@redhat.com/
Link: https://docs.google.com/document/d/1RNKWW9jQyfjxw2E8dsXVTdvZYh0HnYeSHDKog9jhdN8/edit?usp=sharing
Cc: Brian Foster <bfoster@redhat.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Ian Kent <raven@themaw.net>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2022-07-21 17:41:56 -07:00
Paul E. McKenney
bf95b2bc3e rcu: Switch polled grace-period APIs to ->gp_seq_polled
This commit switches the existing polled grace-period APIs to use a
new ->gp_seq_polled counter in the rcu_state structure.  An additional
->gp_seq_polled_snap counter in that same structure allows the normal
grace period kthread to interact properly with the !SMP !PREEMPT fastpath
through synchronize_rcu().  The first of the two to note the end of a
given grace period will make knowledge of this transition available to
the polled API.

This commit is in preparation for polled expedited grace periods.

[ paulmck: Fix use of rcu_state.gp_seq_polled to start normal grace period. ]

Link: https://lore.kernel.org/all/20220121142454.1994916-1-bfoster@redhat.com/
Link: https://docs.google.com/document/d/1RNKWW9jQyfjxw2E8dsXVTdvZYh0HnYeSHDKog9jhdN8/edit?usp=sharing
Cc: Brian Foster <bfoster@redhat.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Ian Kent <raven@themaw.net>
Co-developed-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2022-07-21 17:40:06 -07:00
Uladzislau Rezki (Sony)
8f489b4da5 rcu/nocb: Add option to opt rcuo kthreads out of RT priority
This commit introduces a RCU_NOCB_CPU_CB_BOOST Kconfig option that
prevents rcuo kthreads from running at real-time priority, even in
kernels built with RCU_BOOST.  This capability is important to devices
needing low-latency (as in a few milliseconds) response from expedited
RCU grace periods, but which are not running a classic real-time workload.
On such devices, permitting the rcuo kthreads to run at real-time priority
results in unacceptable latencies imposed on the application tasks,
which run as SCHED_OTHER.

See for example the following trace output:

<snip>
<...>-60 [006] d..1 2979.028717: rcu_batch_start: rcu_preempt CBs=34619 bl=270
<snip>

If that rcuop kthread were permitted to run at real-time SCHED_FIFO
priority, it would monopolize its CPU for hundreds of milliseconds
while invoking those 34619 RCU callback functions, which would cause an
unacceptably long latency spike for many application stacks on Android
platforms.

However, some existing real-time workloads require that callback
invocation run at SCHED_FIFO priority, for example, those running on
systems with heavy SCHED_OTHER background loads.  (It is the real-time
system's administrator's responsibility to make sure that important
real-time tasks run at a higher priority than do RCU's kthreads.)

Therefore, this new RCU_NOCB_CPU_CB_BOOST Kconfig option defaults to
"y" on kernels built with PREEMPT_RT and defaults to "n" otherwise.
The effect is to preserve current behavior for real-time systems, but for
other systems to allow expedited RCU grace periods to run with real-time
priority while continuing to invoke RCU callbacks as SCHED_OTHER.

As you would expect, this RCU_NOCB_CPU_CB_BOOST Kconfig option has no
effect except on CPUs with offloaded RCU callbacks.

Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Acked-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Reviewed-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
2022-07-19 11:43:48 -07:00
Zqiang
5103850654 rcu: Add nocb_cb_kthread check to rcu_is_callbacks_kthread()
Callbacks are invoked in RCU kthreads when calbacks are offloaded
(rcu_nocbs boot parameter) or when RCU's softirq handler has been
offloaded to rcuc kthreads (use_softirq==0).  The current code allows
for the rcu_nocbs case but not the use_softirq case.  This commit adds
support for the use_softirq case.

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Zqiang <qiang1.zhang@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
2022-07-19 11:43:39 -07:00
Neeraj Upadhyay
a03ae49c47 rcu/tree: Add comment to describe GP-done condition in fqs loop
Add a comment to explain why !rcu_preempt_blocked_readers_cgp() condition
is required on root rnp node, for GP completion check in rcu_gp_fqs_loop().

Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2022-07-19 11:40:00 -07:00
Paul E. McKenney
9bdb5b3a8d rcu: Initialize first_gp_fqs at declaration in rcu_gp_fqs()
This commit saves a line of code by initializing the rcu_gp_fqs()
function's first_gp_fqs local variable in its declaration.

Reported-by: Frederic Weisbecker <frederic@kernel.org>
Reported-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2022-07-19 11:40:00 -07:00
Joel Fernandes (Google)
82d26c36cc rcu/kvfree: Remove useless monitor_todo flag
monitor_todo is not needed as the work struct already tracks
if work is pending. Just use that to know if work is pending
using schedule_delayed_work() helper.

Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
2022-07-19 11:40:00 -07:00
Zqiang
e2bb1288a3 rcu: Cleanup RCU urgency state for offline CPU
When a CPU is slow to provide a quiescent state for a given grace
period, RCU takes steps to encourage that CPU to get with the
quiescent-state program in a more timely fashion.  These steps
include these flags in the rcu_data structure:

1.	->rcu_urgent_qs, which causes the scheduling-clock interrupt to
	request an otherwise pointless context switch from the scheduler.

2.	->rcu_need_heavy_qs, which causes both cond_resched() and RCU's
	context-switch hook to do an immediate momentary quiscent state.

3.	->rcu_need_heavy_qs, which causes the scheduler-clock tick to
	be enabled even on nohz_full CPUs with only one runnable task.

These flags are of course cleared once the corresponding CPU has passed
through a quiescent state.  Unless that quiescent state is the CPU
going offline, which means that when the CPU comes back online, it will
needlessly consume additional CPU time and incur additional latency,
which constitutes a minor but very real performance bug.

This commit therefore adds the call to rcu_disable_urgency_upon_qs()
that clears these flags to the CPU-hotplug offlining code path.

Signed-off-by: Zqiang <qiang1.zhang@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
2022-07-19 11:40:00 -07:00
Zqiang
52c1d81ee2 rcu: Add rnp->cbovldmask check in rcutree_migrate_callbacks()
Currently, the rcu_node structure's ->cbovlmask field is set in call_rcu()
when a given CPU is suffering from callback overload.  But if that CPU
goes offline, the outgoing CPU's callbacks is migrated to the running
CPU, which is likely to overload the running CPU.  However, that CPU's
bit in its leaf rcu_node structure's ->cbovlmask field remains zero.

Initially, this is OK because the outgoing CPU's bit remains set.
However, that bit will be cleared at the next end of a grace period,
at which time it is quite possible that the running CPU will still
be overloaded.  If the running CPU invokes call_rcu(), then overload
will be checked for and the bit will be set.  Except that there is no
guarantee that the running CPU will invoke call_rcu(), in which case the
next grace period will fail to take the running CPU's overload condition
into account.  Plus, because the bit is not set, the end of the grace
period won't check for overload on this CPU.

This commit therefore adds a call to check_cb_ovld_locked() in
rcutree_migrate_callbacks() to set the running CPU's ->cbovlmask bit
appropriately.

Signed-off-by: Zqiang <qiang1.zhang@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
2022-07-19 11:39:59 -07:00
Paul E. McKenney
fb77dccfc7 rcu: Decrease FQS scan wait time in case of callback overloading
The force-quiesce-state loop function rcu_gp_fqs_loop() checks for
callback overloading and does an immediate initial scan for idle CPUs
if so.  However, subsequent rescans will be carried out at as leisurely a
rate as they always are, as specified by the rcutree.jiffies_till_next_fqs
module parameter.  It might be tempting to just continue immediately
rescanning, but this turns the RCU grace-period kthread into a CPU hog.
It might also be tempting to reduce the time between rescans to a single
jiffy, but this can be problematic on larger systems.

This commit therefore divides the normal time between rescans by three,
rounding up.  Thus a small system running at HZ=1000 that is suffering
from callback overload will wait only one jiffy instead of the normal
three between rescans.

[ paulmck: Apply Neeraj Upadhyay feedback. ]

Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
2022-07-19 11:39:59 -07:00
Frederic Weisbecker
171476775d context_tracking: Convert state to atomic_t
Context tracking's state and dynticks counter are going to be merged
in a single field so that both updates can happen atomically and at the
same time. Prepare for that with converting the state into an atomic_t.

[ paulmck: Apply kernel test robot feedback. ]

Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Uladzislau Rezki <uladzislau.rezki@sony.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Nicolas Saenz Julienne <nsaenz@kernel.org>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Cc: Yu Liao <liaoyu15@huawei.com>
Cc: Phil Auld <pauld@redhat.com>
Cc: Paul Gortmaker<paul.gortmaker@windriver.com>
Cc: Alex Belits <abelits@marvell.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
Tested-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
2022-07-05 13:33:00 -07:00
Frederic Weisbecker
1721145527 rcu/context-tracking: Move RCU-dynticks internal functions to context_tracking
Move the core RCU eqs/dynticks functions to context tracking so that
we can later merge all that code within context tracking.

Acked-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Uladzislau Rezki <uladzislau.rezki@sony.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Nicolas Saenz Julienne <nsaenz@kernel.org>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Cc: Yu Liao <liaoyu15@huawei.com>
Cc: Phil Auld <pauld@redhat.com>
Cc: Paul Gortmaker<paul.gortmaker@windriver.com>
Cc: Alex Belits <abelits@marvell.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
Tested-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
2022-07-05 13:32:59 -07:00
Frederic Weisbecker
564506495c rcu/context-tracking: Move deferred nocb resched to context tracking
To prepare for migrating the RCU eqs accounting code to context tracking,
split the last-resort deferred nocb resched from rcu_user_enter() and
move it into a separate call from context tracking.

Acked-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Uladzislau Rezki <uladzislau.rezki@sony.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Nicolas Saenz Julienne <nsaenz@kernel.org>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Cc: Yu Liao <liaoyu15@huawei.com>
Cc: Phil Auld <pauld@redhat.com>
Cc: Paul Gortmaker<paul.gortmaker@windriver.com>
Cc: Alex Belits <abelits@marvell.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
Tested-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
2022-07-05 13:32:59 -07:00
Frederic Weisbecker
95e04f48ec rcu/context_tracking: Move dynticks_nmi_nesting to context tracking
The RCU eqs tracking is going to be performed by the context tracking
subsystem. The related nesting counters thus need to be moved to the
context tracking structure.

Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Uladzislau Rezki <uladzislau.rezki@sony.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Nicolas Saenz Julienne <nsaenz@kernel.org>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Cc: Yu Liao <liaoyu15@huawei.com>
Cc: Phil Auld <pauld@redhat.com>
Cc: Paul Gortmaker<paul.gortmaker@windriver.com>
Cc: Alex Belits <abelits@marvell.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
Tested-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
2022-07-05 13:32:59 -07:00
Frederic Weisbecker
904e600e60 rcu/context_tracking: Move dynticks_nesting to context tracking
The RCU eqs tracking is going to be performed by the context tracking
subsystem. The related nesting counters thus need to be moved to the
context tracking structure.

Acked-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Uladzislau Rezki <uladzislau.rezki@sony.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Nicolas Saenz Julienne <nsaenz@kernel.org>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Cc: Yu Liao <liaoyu15@huawei.com>
Cc: Phil Auld <pauld@redhat.com>
Cc: Paul Gortmaker<paul.gortmaker@windriver.com>
Cc: Alex Belits <abelits@marvell.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
Tested-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
2022-07-05 13:32:59 -07:00
Frederic Weisbecker
62e2412df4 rcu/context_tracking: Move dynticks counter to context tracking
In order to prepare for merging RCU dynticks counter into the context
tracking state, move the rcu_data's dynticks field to the context
tracking structure. It will later be mixed within the context tracking
state itself.

[ paulmck: Move enum ctx_state into global scope. ]

Acked-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Uladzislau Rezki <uladzislau.rezki@sony.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Nicolas Saenz Julienne <nsaenz@kernel.org>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Cc: Yu Liao <liaoyu15@huawei.com>
Cc: Phil Auld <pauld@redhat.com>
Cc: Paul Gortmaker<paul.gortmaker@windriver.com>
Cc: Alex Belits <abelits@marvell.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
Tested-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
2022-07-05 13:32:59 -07:00
Frederic Weisbecker
3864caafe7 rcu/context-tracking: Remove rcu_irq_enter/exit()
Now rcu_irq_enter/exit() is an unnecessary middle call between
ct_irq_enter/exit() and nmi_irq_enter/exit(). Take this opportunity
to remove the former functions and move the comments above them to the
new entrypoints.

Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Uladzislau Rezki <uladzislau.rezki@sony.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Nicolas Saenz Julienne <nsaenz@kernel.org>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Cc: Yu Liao <liaoyu15@huawei.com>
Cc: Phil Auld <pauld@redhat.com>
Cc: Paul Gortmaker<paul.gortmaker@windriver.com>
Cc: Alex Belits <abelits@marvell.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
Tested-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
2022-07-05 13:32:59 -07:00
Frederic Weisbecker
e67198cc05 context_tracking: Take idle eqs entrypoints over RCU
The RCU dynticks counter is going to be merged into the context tracking
subsystem. Start with moving the idle extended quiescent states
entrypoints to context tracking. For now those are dumb redirections to
existing RCU calls.

[ paulmck: Apply kernel test robot feedback. ]

Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Uladzislau Rezki <uladzislau.rezki@sony.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Nicolas Saenz Julienne <nsaenz@kernel.org>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Cc: Yu Liao <liaoyu15@huawei.com>
Cc: Phil Auld <pauld@redhat.com>
Cc: Paul Gortmaker<paul.gortmaker@windriver.com>
Cc: Alex Belits <abelits@marvell.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
Tested-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
2022-07-05 13:32:16 -07:00
Roman Gushchin
e33c267ab7 mm: shrinkers: provide shrinkers with names
Currently shrinkers are anonymous objects.  For debugging purposes they
can be identified by count/scan function names, but it's not always
useful: e.g.  for superblock's shrinkers it's nice to have at least an
idea of to which superblock the shrinker belongs.

This commit adds names to shrinkers.  register_shrinker() and
prealloc_shrinker() functions are extended to take a format and arguments
to master a name.

In some cases it's not possible to determine a good name at the time when
a shrinker is allocated.  For such cases shrinker_debugfs_rename() is
provided.

The expected format is:
    <subsystem>-<shrinker_type>[:<instance>]-<id>
For some shrinkers an instance can be encoded as (MAJOR:MINOR) pair.

After this change the shrinker debugfs directory looks like:
  $ cd /sys/kernel/debug/shrinker/
  $ ls
    dquota-cache-16     sb-devpts-28     sb-proc-47       sb-tmpfs-42
    mm-shadow-18        sb-devtmpfs-5    sb-proc-48       sb-tmpfs-43
    mm-zspool:zram0-34  sb-hugetlbfs-17  sb-pstore-31     sb-tmpfs-44
    rcu-kfree-0         sb-hugetlbfs-33  sb-rootfs-2      sb-tmpfs-49
    sb-aio-20           sb-iomem-12      sb-securityfs-6  sb-tracefs-13
    sb-anon_inodefs-15  sb-mqueue-21     sb-selinuxfs-22  sb-xfs:vda1-36
    sb-bdev-3           sb-nsfs-4        sb-sockfs-8      sb-zsmalloc-19
    sb-bpf-32           sb-pipefs-14     sb-sysfs-26      thp-deferred_split-10
    sb-btrfs:vda2-24    sb-proc-25       sb-tmpfs-1       thp-zero-9
    sb-cgroup2-30       sb-proc-39       sb-tmpfs-27      xfs-buf:vda1-37
    sb-configfs-23      sb-proc-41       sb-tmpfs-29      xfs-inodegc:vda1-38
    sb-dax-11           sb-proc-45       sb-tmpfs-35
    sb-debugfs-7        sb-proc-46       sb-tmpfs-40

[roman.gushchin@linux.dev: fix build warnings]
  Link: https://lkml.kernel.org/r/Yr+ZTnLb9lJk6fJO@castle
  Reported-by: kernel test robot <lkp@intel.com>
Link: https://lkml.kernel.org/r/20220601032227.4076670-4-roman.gushchin@linux.dev
Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-07-03 18:08:40 -07:00
Paul E. McKenney
ed4ae5eff4 rcu: Apply noinstr to rcu_idle_enter() and rcu_idle_exit()
This commit applies the "noinstr" tag to the rcu_idle_enter() and
rcu_idle_exit() functions, which are invoked from portions of the idle
loop that cannot be instrumented.  These tags require reworking the
rcu_eqs_enter() and rcu_eqs_exit() functions that these two functions
invoke in order to cause them to use normal assertions rather than
lockdep.  In addition, within rcu_idle_exit(), the raw versions of
local_irq_save() and local_irq_restore() are used, again to avoid issues
with lockdep in uninstrumented code.

This patch is based in part on an earlier patch by Jiri Olsa, discussions
with Peter Zijlstra and Frederic Weisbecker, earlier changes by Thomas
Gleixner, and off-list discussions with Yonghong Song.

Link: https://lore.kernel.org/lkml/20220515203653.4039075-1-jolsa@kernel.org/
Reported-by: Jiri Olsa <jolsa@kernel.org>
Reported-by: Alexei Starovoitov <ast@kernel.org>
Reported-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Yonghong Song <yhs@fb.com>
2022-06-20 09:30:10 -07:00
Paul E. McKenney
414c12385d rcu: Provide a get_completed_synchronize_rcu() function
It is currently up to the caller to handle stale return values from
get_state_synchronize_rcu().  If poll_state_synchronize_rcu() returned
true once, a grace period has elapsed, regardless of the fact that counter
wrap might cause some future poll_state_synchronize_rcu() invocation to
return false.  For example, the caller might store a separate flag that
indicates whether some previous call to poll_state_synchronize_rcu()
determined that the relevant grace period had already ended.

This approach works, but it requires extra storage and is easy to get
wrong.  This commit therefore introduces a get_completed_synchronize_rcu()
that returns a cookie that causes poll_state_synchronize_rcu() to always
return true.  This already-completed cookie can be stored in place of the
cookie that previously caused poll_state_synchronize_rcu() to return true.
It can also be used to flag a given structure as not having been exposed
to readers, and thus not requiring a grace period to elapse.

This commit is in preparation for polled expedited grace periods.

Link: https://lore.kernel.org/all/20220121142454.1994916-1-bfoster@redhat.com/
Link: https://docs.google.com/document/d/1RNKWW9jQyfjxw2E8dsXVTdvZYh0HnYeSHDKog9jhdN8/edit?usp=sharing
Cc: Brian Foster <bfoster@redhat.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Ian Kent <raven@themaw.net>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2022-06-20 09:21:51 -07:00
Paul E. McKenney
2403e8044f rcu: Make normal polling GP be more precise about sequence numbers
Currently, poll_state_synchronize_rcu() uses rcu_seq_done() to check
whether the specified grace period has completed.  However, rcu_seq_done()
does a simple comparison that reserves have of the sequence-number space
for uncompleted grace periods.  This has the unfortunate side-effect
of not handling sequence-number wrap gracefully.  Of course, one can
argue that if someone has already waited for half of the full range of
grace periods, they can wait for the other half, but why wait at all in
this case?

This commit therefore creates a rcu_seq_done_exact() that counts as
uncompleted only the two grace periods during which the sequence number
might have been handed out, while still being uncompleted.  This way,
if sequence-number wrap happens to hit that range, at most two additional
grace periods need be waited for.

This commit is in preparation for polled expedited grace periods.

Link: https://lore.kernel.org/all/20220121142454.1994916-1-bfoster@redhat.com/
Link: https://docs.google.com/document/d/1RNKWW9jQyfjxw2E8dsXVTdvZYh0HnYeSHDKog9jhdN8/edit?usp=sharing
Cc: Brian Foster <bfoster@redhat.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Ian Kent <raven@themaw.net>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2022-06-20 09:21:50 -07:00
Paul E. McKenney
ce13389053 Merge branch 'exp.2022.05.11a' into HEAD
exp.2022.05.11a: Expedited-grace-period latency-reduction updates.
2022-05-11 11:49:35 -07:00
Kalesh Singh
9621fbee44 rcu: Move expedited grace period (GP) work to RT kthread_worker
Enabling CONFIG_RCU_BOOST did not reduce RCU expedited grace-period
latency because its workqueues run at SCHED_OTHER, and thus can be
delayed by normal processes.  This commit avoids these delays by moving
the expedited GP work items to a real-time-priority kthread_worker.

This option is controlled by CONFIG_RCU_EXP_KTHREAD and disabled by
default on PREEMPT_RT=y kernels which disable expedited grace periods
after boot by unconditionally setting rcupdate.rcu_normal_after_boot=1.

The results were evaluated on arm64 Android devices (6GB ram) running
5.10 kernel, and capturing trace data in critical user-level code.

The table below shows the resulting order-of-magnitude improvements
in synchronize_rcu_expedited() latency:

------------------------------------------------------------------------
|                          |   workqueues  |  kthread_worker |  Diff   |
------------------------------------------------------------------------
| Count                    |          725  |            688  |         |
------------------------------------------------------------------------
| Min Duration       (ns)  |          326  |            447  |  37.12% |
------------------------------------------------------------------------
| Q1                 (ns)  |       39,428  |         38,971  |  -1.16% |
------------------------------------------------------------------------
| Q2 - Median        (ns)  |       98,225  |         69,743  | -29.00% |
------------------------------------------------------------------------
| Q3                 (ns)  |      342,122  |        126,638  | -62.98% |
------------------------------------------------------------------------
| Max Duration       (ns)  |  372,766,967  |      2,329,671  | -99.38% |
------------------------------------------------------------------------
| Avg Duration       (ns)  |    2,746,353  |        151,242  | -94.49% |
------------------------------------------------------------------------
| Standard Deviation (ns)  |   19,327,765  |        294,408  |         |
------------------------------------------------------------------------

The below table show the range of maximums/minimums for
synchronize_rcu_expedited() latency from all experiments:

------------------------------------------------------------------------
|                          |   workqueues  |  kthread_worker |  Diff   |
------------------------------------------------------------------------
| Total No. of Experiments |           25  |             23  |         |
------------------------------------------------------------------------
| Largest  Maximum   (ns)  |  372,766,967  |      2,329,671  | -99.38% |
------------------------------------------------------------------------
| Smallest Maximum   (ns)  |       38,819  |         86,954  | 124.00% |
------------------------------------------------------------------------
| Range of Maximums  (ns)  |  372,728,148  |      2,242,717  |         |
------------------------------------------------------------------------
| Largest  Minimum   (ns)  |       88,623  |         27,588  | -68.87% |
------------------------------------------------------------------------
| Smallest Minimum   (ns)  |          326  |            447  |  37.12% |
------------------------------------------------------------------------
| Range of Minimums  (ns)  |       88,297  |         27,141  |         |
------------------------------------------------------------------------

Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Reported-by: Tim Murray <timmurray@google.com>
Reported-by: Wei Wang <wvw@google.com>
Tested-by: Kyle Lin <kylelin@google.com>
Tested-by: Chunwei Lu <chunweilu@google.com>
Tested-by: Lulu Wang <luluw@google.com>
Signed-off-by: Kalesh Singh <kaleshsingh@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2022-05-11 11:47:10 -07:00
Paul E. McKenney
be05ee5437 Merge branches 'docs.2022.04.20a', 'fixes.2022.04.20a', 'nocb.2022.04.11b', 'rcu-tasks.2022.04.11b', 'srcu.2022.05.03a', 'torture.2022.04.11b', 'torture-tasks.2022.04.20a' and 'torturescript.2022.04.20a' into HEAD
docs.2022.04.20a: Documentation updates.
fixes.2022.04.20a: Miscellaneous fixes.
nocb.2022.04.11b: Callback-offloading updates.
rcu-tasks.2022.04.11b: RCU-tasks updates.
srcu.2022.05.03a: Put SRCU on a memory diet.
torture.2022.04.11b: Torture-test updates.
torture-tasks.2022.04.20a: Avoid torture testing changing RCU configuration.
torturescript.2022.04.20a: Torture-test scripting updates.
2022-05-03 10:21:40 -07:00
Frederic Weisbecker
70ae7b0ce0 rcu: Fix preemption mode check on synchronize_rcu[_expedited]()
An early check on synchronize_rcu[_expedited]() tries to determine if
the current CPU is in UP mode on an SMP no-preempt kernel, in which case
there is no need to start a grace period since the current assumed
quiescent state is all we need.

However the preemption mode doesn't take into account the boot selected
preemption mode under CONFIG_PREEMPT_DYNAMIC=y, missing a possible
early return if the running flavour is "none" or "voluntary".

Use the shiny new preempt mode accessors to fix this.  However,
avoid invoking them during early boot because doing so triggers a
WARN_ON_ONCE().

[ paulmck: Update for mainlined API. ]

Reported-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Uladzislau Rezki <uladzislau.rezki@sony.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2022-04-20 16:51:11 -07:00
Paul E. McKenney
75182a4eaa rcu: Add comments to final rcu_gp_cleanup() "if" statement
The final "if" statement in rcu_gp_cleanup() has proven to be rather
confusing, straightforward though it might have seemed when initially
written.  This commit therefore adds comments to its "then" and "else"
clauses to at least provide a more elevated form of confusion.

Reported-by: Boqun Feng <boqun.feng@gmail.com>
Reported-by: Frederic Weisbecker <frederic@kernel.org>
Reported-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Reported-by: Uladzislau Rezki <urezki@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2022-04-20 16:51:10 -07:00
Paul E. McKenney
c708b08c65 rcu: Check for jiffies going backwards
A report of a 12-jiffy normal RCU CPU stall warning raises interesting
questions about the nature of time on the offending system.  This commit
instruments rcu_sched_clock_irq(), which is RCU's hook into the
scheduling-clock interrupt, checking for the jiffies counter going
backwards.

Reported-by: Saravanan D <sarvanand@fb.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2022-04-11 17:28:48 -07:00
Paul E. McKenney
99d6a2acb8 rcutorture: Suppress debugging grace period delays during flooding
Tree RCU supports grace-period delays using the rcutree.gp_cleanup_delay,
rcutree.gp_init_delay, and rcutree.gp_preinit_delay kernel boot
parameters.  These delays are strictly for debugging purposes, and have
proven quite effective at exposing bugs involving race with CPU-hotplug
operations.  However, these delays can result in false positives when
used in conjunction with callback flooding, for example, those generated
by the rcutorture.fwd_progress kernel boot parameter.

This commit therefore suppresses grace-period delays while callback
flooding is in progress.

Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2022-04-11 17:07:28 -07:00
Paul E. McKenney
5d90070816 rcu-tasks: Make Tasks RCU account for userspace execution
The main Tasks RCU quiescent state is voluntary context switch.  However,
userspace execution is also a valid quiescent state, and is a valuable one
for userspace applications that spin repeatedly executing light-weight
non-sleeping system calls.  Currently, such an application can delay a
Tasks RCU grace period for many tens of seconds.

This commit therefore enlists the aid of the scheduler-clock interrupt to
provide a Tasks RCU quiescent state when it interrupted a task executing
in userspace.

[ paulmck: Apply feedback from kernel test robot. ]

Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Neil Spring <ntspring@fb.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2022-04-11 17:06:42 -07:00
Frederic Weisbecker
87c5adf06b rcu/nocb: Initialize nocb kthreads only for boot CPU prior SMP initialization
The rcu_spawn_gp_kthread() function is called as an early initcall, which
means that SMP initialization hasn't happened yet and only the boot CPU is
online. Therefore, create only the NOCB kthreads related to the boot CPU.

Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Uladzislau Rezki <uladzislau.rezki@sony.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2022-04-11 17:05:58 -07:00
Frederic Weisbecker
3352911fa9 rcu: Initialize boost kthread only for boot node prior SMP initialization
The rcu_spawn_gp_kthread() function is called as an early initcall,
which means that SMP initialization hasn't happened yet and only the
boot CPU is online.  Therefore, create only the boost kthread for the
leaf node of the boot CPU.

Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Uladzislau Rezki <uladzislau.rezki@sony.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2022-04-11 17:05:58 -07:00
Frederic Weisbecker
2eed973adc rcu: Assume rcu_init() is called before smp
The rcu_init() function is called way before SMP is initialized and
therefore only the boot CPU should be online at this stage.

Simplify the boot per-cpu initialization accordingly.

Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Uladzislau Rezki <uladzislau.rezki@sony.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2022-04-11 17:05:58 -07:00
Linus Torvalds
35dc0352bb RCU pull request for v5.18
This pull request contains the following branches:
 
 exp.2022.02.24a: Contains a fix for idle detection from Neeraj Upadhyay
 	and missing access marking detected by KCSAN.
 
 fixes.2022.02.14a: Miscellaneous fixes.
 
 rcu_barrier.2022.02.08a: Reduces coupling between rcu_barrier() and
 	CPU-hotplug operations, so that rcu_barrier() no longer needs
 	to do cpus_read_lock().  This may also someday allow system
 	boot to bring CPUs online concurrently.
 
 rcu-tasks.2022.02.08a: Enable more aggressive movement to per-CPU
 	queueing when reacting to excessive lock contention due
 	to workloads placing heavy update-side stress on RCU tasks.
 
 rt.2022.02.01b: Improvements to RCU priority boosting, including
 	changes from Neeraj Upadhyay, Zqiang, and Alison Chaiken.
 
 torture.2022.02.01b: Various fixes improving test robustness and
 	debug information.
 
 torturescript.2022.02.08a: Add tests for SRCU size transitions, further
 	compress torture.sh build products, and improve debug output.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCgAxFiEEbK7UrM+RBIrCoViJnr8S83LZ+4wFAmIusb0THHBhdWxtY2tA
 a2VybmVsLm9yZwAKCRCevxLzctn7jAklD/9VXLK7crcg2YeRXUIg1IOdnancsVCV
 MNtTfxNYqYIis+W2UfuHKuQu2yEXF5fihdY0J9TQv0byHsprp6FIZT+i1An4Ukgd
 0vyHjd/DaIKgs2txsB1DjhlatWlJUfQuBwhtNUkpYFLFwKdCI1l813bPbNlL+GiL
 p0ZejVMpBC5HgE6sDOtaaQSAB+AEUp+Lgr+yaG/On8hfzwWFKO8KldxhiKY9n07v
 SNDfKDgXB+80hx4RBVGbkuogV3s9brFULoNRXJy7Uf79DtiY09uazhhA3G0TjO34
 zGwmF91dqsXDF/Uz8g4aZO0xYRXUchOrsQ5lgO/GhTVbM9I0wWlMHEk/8WHyBJkU
 vlXOMuwzBc9/5uwZE3rnkA4a3nkXhPQjLlCr+/I7A/7Vsv9IBW9WSlgMvUN0Qf4S
 XAwTnIqfErnR60a+L0+HRr5kIV5VoXcxqI/Nv0/4/BMLRubS/c7cYjOTxXNJL9SU
 50pv5vty9xk3HSpuz0JAOyLf+PUT773uUQhFr5xCBSCVqbAm5WFg6hWPAgrN/tUS
 wstBc0wlA73rKVJxeLDQwHc/oT1zTUEzswVZITQ5zLHK0t0GbeR6QHccsdeaJyTe
 DisX+66A6YQrEuJmx5xUZqjYHqtYLDOBTbHA3ZwQmvjKu8ibWZ8Fg9ioURLCS4bF
 +FVkp/5KdcAN9w==
 =ljVY
 -----END PGP SIGNATURE-----

Merge tag 'rcu.2022.03.13a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu

Pull RCU updates from Paul McKenney:

 - Fix idle detection (Neeraj Upadhyay) and missing access marking
   detected by KCSAN.

 - Reduce coupling between rcu_barrier() and CPU-hotplug operations, so
   that rcu_barrier() no longer needs to do cpus_read_lock(). This may
   also someday allow system boot to bring CPUs online concurrently.

 - Enable more aggressive movement to per-CPU queueing when reacting to
   excessive lock contention due to workloads placing heavy update-side
   stress on RCU tasks.

 - Improvements to RCU priority boosting, including changes from Neeraj
   Upadhyay, Zqiang, and Alison Chaiken.

 - Various fixes improving test robustness and debug information.

 - Add tests for SRCU size transitions, further compress torture.sh
   build products, and improve debug output.

 - Miscellaneous fixes.

* tag 'rcu.2022.03.13a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (49 commits)
  rcu: Replace cpumask_weight with cpumask_empty where appropriate
  rcu: Remove __read_mostly annotations from rcu_scheduler_active externs
  rcu: Uninline multi-use function: finish_rcuwait()
  rcu: Mark writes to the rcu_segcblist structure's ->flags field
  kasan: Record work creation stack trace with interrupts enabled
  rcu: Inline __call_rcu() into call_rcu()
  rcu: Add mutex for rcu boost kthread spawning and affinity setting
  rcu: Fix description of kvfree_rcu()
  MAINTAINERS:  Add Frederic and Neeraj to their RCU files
  rcutorture: Provide non-power-of-two Tasks RCU scenarios
  rcutorture: Test SRCU size transitions
  torture: Make torture.sh help message match reality
  rcu-tasks: Set ->percpu_enqueue_shift to zero upon contention
  rcu-tasks: Use order_base_2() instead of ilog2()
  rcu: Create and use an rcu_rdp_cpu_online()
  rcu: Make rcu_barrier() no longer block CPU-hotplug operations
  rcu: Rework rcu_barrier() and callback-migration logic
  rcu: Refactor rcu_barrier() empty-list handling
  rcu: Kill rnp->ofl_seq and use only rcu_state.ofl_lock for exclusion
  torture: Change KVM environment variable to RCUTORTURE
  ...
2022-03-21 14:00:56 -07:00
Frederic Weisbecker
2984539959 tick/rcu: Remove obsolete rcu_needs_cpu() parameters
With the removal of CONFIG_RCU_FAST_NO_HZ, the parameters in
rcu_needs_cpu() are not necessary anymore. Simply remove them.

Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Paul Menzel <pmenzel@molgen.mpg.de>
2022-03-07 23:01:26 +01:00
Paul E. McKenney
d5578190be Merge branches 'exp.2022.02.24a', 'fixes.2022.02.14a', 'rcu_barrier.2022.02.08a', 'rcu-tasks.2022.02.08a', 'rt.2022.02.01b', 'torture.2022.02.01b' and 'torturescript.2022.02.08a' into HEAD
exp.2022.02.24a: Expedited grace-period updates.
fixes.2022.02.14a: Miscellaneous fixes.
rcu_barrier.2022.02.08a: Make rcu_barrier() no longer exclude CPU hotplug.
rcu-tasks.2022.02.08a: RCU-tasks updates.
rt.2022.02.01b: Real-time-related updates.
torture.2022.02.01b: Torture-test updates.
torturescript.2022.02.08a: Torture-test scripting updates.
2022-02-24 09:38:46 -08:00
Zqiang
d818cc76e2 kasan: Record work creation stack trace with interrupts enabled
Recording the work creation stack trace for KASAN reports in
call_rcu() is expensive, due to unwinding the stack, but also
due to acquiring depot_lock inside stackdepot (which may be contended).
Because calling kasan_record_aux_stack_noalloc() does not require
interrupts to already be disabled, this may unnecessarily extend
the time with interrupts disabled.

Therefore, move calling kasan_record_aux_stack() before the section
with interrupts disabled.

Acked-by: Marco Elver <elver@google.com>
Signed-off-by: Zqiang <qiang1.zhang@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2022-02-14 10:36:58 -08:00