"samsung,audio-widgets" and "samsung,audio-routing" are not boolean
properties, thus more appropriate is to use of_property_present() to
check if they are present.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230810063300.20151-7-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The call to snd_sof_find_spcm_dai() could return NULL,
add nullable check for the return value to avoid null
pointer defenrece.
Fixes: 7cb19007ba ("ASoC: SOF: ipc4-pcm: add hw_params")
Signed-off-by: Chao Song <chao.song@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230816133311.7523-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Set spec->en_3kpull_low default to true.
Then fillback ALC236 and ALC257 to false.
Additional note: this addresses a regression caused by the previous
fix 69ea4c9d02 ("ALSA: hda/realtek - remove 3k pull low procedure").
The previous workaround was applied too widely without necessity,
which resulted in the pop noise at PM again. This patch corrects the
condition and restores the old behavior for the devices that don't
suffer from the original problem.
Fixes: 69ea4c9d02 ("ALSA: hda/realtek - remove 3k pull low procedure")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217732
Link: https://lore.kernel.org/r/01e212a538fc407ca6edd10b81ff7b05@realtek.com
Signed-off-by: Kailang Yang <kailang@realtek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
AlderLake and RaptorLake Chromebooks currently use the HDA driver by
default. Add a quirk to use the SOF driver on these platforms, which is
needed for functional internal audio.
Signed-off-by: Brady Norander <bradynorander@gmail.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Acked-by: Curtis Malainey <cujomalainey@chromium.org>
Link: https://lore.kernel.org/r/ZNuDLk5hgmfKrZg6@arch
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Some systems using CS35L41 with HDA were released without some
required _DSD properties in ACPI. To support these special cases,
add an api to configure the correct properties for systems with
this issue.
This initial commit moves the no _DSD support for Lenovo
Legion Laptops (CLSA0100, CLSA0101) into a new framework which
can be extended to support additional laptops in the future.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230815161033.3519-1-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A fairly large collection of fixes here, mostly SOF and Intel related.
The one core fix is Hans' change which reduces the log spam when working
out new use cases for DPCM.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmTbq9kACgkQJNaLcl1U
h9DjOwf+LH6skuS33cgeXKBEWdu5xP1WJ82y7Xjfr+kzecSZSSQEBI1NJgEBHNbk
yd4ZnCnTy2/WKdj/IxsuifK8WrqT8jIpWXw25SUeYw+VavgLDXfDZvzmQaO0oigR
ACIwhgtJJshlYzNIYvwyL2CMjZPliGEr6LGLA2Da4lxFivo9JFN2imRzS/k5aQ2o
YdsVg0xH/TytNUZ//gJh1HaRfOzu1hsqAawzcWnTAEX1EadViZSAFHsdn02VA2Yg
gLONXU+w1WrsKkTgUnrnAgnFDvda06KIO17M+bNXkiDZa+wVMJ2Zh8p89j4psHBN
d+JpY9PQHcyx0BEufvtCYHsdfAh7cg==
=zEhY
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v6.5-rc6' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.5
A fairly large collection of fixes here, mostly SOF and Intel related.
The one core fix is Hans' change which reduces the log spam when working
out new use cases for DPCM.
'version' is an enum, thus cast of pointer on 64-bit compile test with
W=1 causes:
rockchip_pdm.c:587:18: error: cast to smaller integer type 'enum rk_pdm_version' from 'const void *' [-Werror,-Wvoid-pointer-to-enum-cast]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230815143204.379708-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
'devtype' is an enum, thus cast of pointer on 64-bit compile test with
W=1 causes:
wm8904.c:2205:21: error: cast to smaller integer type 'enum wm8904_type' from 'const void *' [-Werror,-Wvoid-pointer-to-enum-cast]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230815143204.379708-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
'type' is an enum, thus cast of pointer on 64-bit compile test with W=1
causes:
tlv320aic32x4.c:1352:18: error: cast to smaller integer type 'enum aic32x4_type' from 'void *' [-Werror,-Wvoid-pointer-to-enum-cast]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230815143204.379708-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Richard Fitzgerald <rf@opensource.cirrus.com>:
Use the FIRMWARE_MISSING flag in the CS35L56 to determine whether it is
safe to download a firmware patch.
Merge series from Li Zetao <lizetao1@huawei.com>:
This patch set use the helper function devm_kmemdup() to replace
devm_kmalloc + memcpy, which is the same as implementing the function
separately.
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
The use of the widget name as a prefix for the kcontrol name is quite
useful in the case of multiple pipelines going to the same endpoint,
but it's overkill in simpler cases.
This patchset extends the existing DAPM code to drop the widget name
prefix and make the kcontrol names simpler when there's no possible
ambiguity, e.g. "gain.2.1 Main Playback Volume" becomes just "Main
Playback Volume".
Only attempt to download wmfw/bin files to a non-secured part if
it reports FIRMWARE_MISSING. If FIRMWARE_MISSING is false the
firmware has already been patched and overwriting the patch could
corrupt the running firmware.
For a secured part the wmfw/bin can be downloaded even if
FIRMWARE_MISSING is false, because they will only patch tunings.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230815124826.5447-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a flag to wm_adsp_power_up() that indicates whether it should attempt
to find and load firmware files.
This is to support DSPs that have built-in firmware that may already have
been patched (for example, by the BIOS). In that case the patch must not
be overwritten because that could corrupt the running firmware.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230815124826.5447-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Existing HDA stream creation is split into two
for loops for capture and playback, but most of
the code in the two for loops are duplicated.
This patch refactors HDA stream creation with a
single for loop, thus remove code duplication.
No functional change in this patch.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Chao Song <chao.song@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230814231519.79051-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Adding HDMI-In capture support for the RPL products doesn't have onboard
I2S codec.but need to support HDMI-In capture via I2S and audio playback
through HDMI/DP monitor.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Balamurugan C <balamurugan.c@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230814231358.78971-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds the acpi match table for Dell SKU0C87
devices, the codec layout is:
SDW0: RT714 DMIC
SDW1: RT1318 Speaker
SDW2: RT1318 Speaker
Note that there is no jack codec on SKU0C87 devices.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Chao Song <chao.song@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230814231358.78971-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Adding HDMI-In capture via I2S feature support in RPL platfroms.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Balamurugan C <balamurugan.c@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230814231358.78971-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Adding support for ES83x6 codec in RPL match table.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Balamurugan C <balamurugan.c@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230814231358.78971-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Adds SOF_TKN_COMP_NO_WNAME_IN_KCONTROL_NAME token, and copies the
token's tuple value to the no_wname_in_kcontrol_name flag in struct
snd_soc_dapm_widget.
If the tuple value for the token in the topology is true, then the
widget name is not added to the mixer name. In practice "gain.2.1 Post
Mixer Analog Playback Volume" becomes just "Post Mixer Analog Playback
Volume".
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Jyri Sarha <jyri.sarha@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230814232325.86397-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The existing soc-dapm code may add a prefix to control names, which in
some cases is useful but in others leads to long and confusing kcontrol
names such as "gain 2.1 Main Playback Volume".
This patch suggests an added flag to prevent the widget name prefix
from being added. That flag will be set in the topology file on a
per-widget basis.
The flag no_wname_in_kcontrol_name is added to struct snd_soc_dapm_widget,
and the logic in dapm_create_or_share_kcontrol() is changed to not to
add widget name if the flag is set.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Jyri Sarha <jyri.sarha@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230814232325.86397-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When snd_soc_card_jack_new is not called or the call fails,
calling this function causes a null pointer access
Signed-off-by: mnlife <mnlife@126.com>
Link: https://lore.kernel.org/r/20230811142511.6570-1-mnlife@126.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Boards were using this in older kernels before adl and rpl ids were
split. Add this back to maintain support.
Signed-off-by: Ajye Huang <ajye_huang@compal.corp-partner.google.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230804085648.3721416-1-ajye_huang@compal.corp-partner.google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the helper function devm_kmemdup() rather than duplicating its
implementation, which helps to enhance code readability.
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://lore.kernel.org/r/20230810114738.2103792-3-lizetao1@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the helper function devm_kmemdup() rather than duplicating its
implementation, which helps to enhance code readability.
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Link: https://lore.kernel.org/r/20230810114738.2103792-2-lizetao1@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The value of register(NDAC,MDAC,NADC,MADC,BCLKN) maybe zero lead to
divide by zero in clk_aic32x4_div_recalc_rate().And the rate should be
divide by 128 if the value was zero in this function according to the
datasheet.
Add the macro AIC32X4_DIV_MAX to present the 128 and return 0 if failing
to read the value of register.
Signed-off-by: Guiting Shen <aarongt.shen@gmail.com>
Link: https://lore.kernel.org/r/20230813125520.11067-1-aarongt.shen@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Simpilfy probe() by replacing of_device_get_match_data() and id lookup for
retrieving match data by i2c_get_match_data().
While at it, drop unused local variable np from probe().
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20230813073458.59606-1-biju.das.jz@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ALSA SoC merges DAI call backs into .ops.
This patch merge these into one.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/87h6p99m55.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ALSA SoC merges DAI call backs into .ops.
This patch merge these into one.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Walker Chen <walker.chen@starfivetech.com>
Link: https://lore.kernel.org/r/87msz19m5r.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ALSA SoC merges DAI call backs into .ops.
This patch merge these into one.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Trevor Wu <trevor.wu@mediatek.com>
Link: https://lore.kernel.org/r/87sf8t9m6n.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ALSA SoC merges DAI call backs into .ops.
This patch merge these into one.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Link: https://lore.kernel.org/r/87wmy59m7a.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ALSA SoC merges DAI call backs into .ops.
This patch merge these into one.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/875y5pb0sr.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ALSA SoC merges DAI call backs into .ops.
This patch merge these into one.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/877cq5b0sx.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ALSA SoC merges DAI call backs into .ops.
This patch merge these into one.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Maxim Kochetkov <fido_max@inbox.ru>
Link: https://lore.kernel.org/r/87o7jhb0v4.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_dai_driver has .ops for call back functions (A), but it also
has other call back functions (B). It is duplicated and confusable.
struct snd_soc_dai_driver {
...
^ int (*probe)(...);
| int (*remove)(...);
(B) int (*compress_new)(...);
| int (*pcm_new)(...);
v ...
(A) const struct snd_soc_dai_ops *ops;
...
}
This patch merges (B) into (A).
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87v8dpb0w6.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Linus Walleij <linus.walleij@linaro.org>:
These drivers include legacy GPIO headers for no reason
at all, so get rid of the includes.
Merge series from Ruan Jinjie <ruanjinjie@huawei.com>:
Since these sound drivers depend on CONFIG_OF, there is
no need to wrap the macro of_match_ptr() here.
This driver include the GPIO legacy header <linux/gpio.h yet
doesn't use symbols from it. It is using the new consumer
include <linux/gpio/consumer.h already. Drop the surplus
include.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org
Link: https://lore.kernel.org/r/20230812-descriptors-asoc-v1-11-eb4dca1f68af@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org
This driver include the GPIO legacy header <linux/gpio.h yet
doesn't use symbols from it. It is using the new consumer
include <linux/gpio/consumer.h already. Drop the surplus
include.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org
Link: https://lore.kernel.org/r/20230812-descriptors-asoc-v1-10-eb4dca1f68af@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org
This driver include the GPIO legacy header <linux/gpio.h yet
doesn't use symbols from it. It is using the new consumer
include <linux/gpio/consumer.h already. Drop the surplus
include.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org
Link: https://lore.kernel.org/r/20230812-descriptors-asoc-v1-3-eb4dca1f68af@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org
The driver depends on CONFIG_OF, it is not necessary to use
of_match_ptr() here.
Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com
Reviewed-by: Takashi Iwai <tiwai@suse.de
Link: https://lore.kernel.org/r/20230811071426.2343133-6-ruanjinjie@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org
The driver depends on CONFIG_OF, it is not necessary to use
of_match_ptr() here.
Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com
Link: https://lore.kernel.org/r/20230811071426.2343133-4-ruanjinjie@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org
This patch uses a vendor register to check whether the system hibernated ever.
The driver will only set the preset when the driver brings up or the system hibernated.
It will avoid the unknown issue that makes the speaker output louder and can't control the volume.
Signed-off-by: Shuming Fan <shumingf@realtek.com
Link: https://lore.kernel.org/r/20230811093822.37573-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org
This makes all those 'char's an explicit 'u8'. This is part of the
continuing unification of chars and flags to be consistent u8.
This approaches tty_port_default_receive_buf().
Note that we do not change signedness as we compile with
-funsigned-char.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Cc: William Hubbs <w.d.hubbs@gmail.com>
Cc: Chris Brannon <chris@the-brannons.com>
Cc: Kirk Reiser <kirk@reisers.ca>
Cc: Samuel Thibault <samuel.thibault@ens-lyon.org>
Cc: Marcel Holtmann <marcel@holtmann.org>
Cc: Johan Hedberg <johan.hedberg@gmail.com>
Cc: Luiz Augusto von Dentz <luiz.dentz@gmail.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Max Staudt <max@enpas.org>
Cc: Wolfgang Grandegger <wg@grandegger.com>
Cc: Marc Kleine-Budde <mkl@pengutronix.de>
Cc: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Cc: Andreas Koensgen <ajk@comnets.uni-bremen.de>
Cc: Jeremy Kerr <jk@codeconstruct.com.au>
Cc: Matt Johnston <matt@codeconstruct.com.au>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230810091510.13006-18-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This makes all those 'unsigned char's an explicit 'u8'. This is part of
the continuing unification of chars and flags to be consistent u8.
This approaches tty_port_default_receive_buf(). Flags to be next.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Cc: William Hubbs <w.d.hubbs@gmail.com>
Cc: Chris Brannon <chris@the-brannons.com>
Cc: Kirk Reiser <kirk@reisers.ca>
Cc: Samuel Thibault <samuel.thibault@ens-lyon.org>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Max Staudt <max@enpas.org>
Cc: Wolfgang Grandegger <wg@grandegger.com>
Cc: Marc Kleine-Budde <mkl@pengutronix.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Cc: Andreas Koensgen <ajk@comnets.uni-bremen.de>
Cc: Jeremy Kerr <jk@codeconstruct.com.au>
Cc: Matt Johnston <matt@codeconstruct.com.au>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230810091510.13006-17-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Count passed to tty_ldisc_ops::receive_buf*(), ::lookahead_buf(), and
returned from ::receive_buf2() is expected to be size_t. So set it to
size_t to unify with the rest of the code.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Cc: William Hubbs <w.d.hubbs@gmail.com>
Cc: Chris Brannon <chris@the-brannons.com>
Cc: Kirk Reiser <kirk@reisers.ca>
Cc: Samuel Thibault <samuel.thibault@ens-lyon.org>
Cc: Marcel Holtmann <marcel@holtmann.org>
Cc: Johan Hedberg <johan.hedberg@gmail.com>
Cc: Luiz Augusto von Dentz <luiz.dentz@gmail.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Max Staudt <max@enpas.org>
Cc: Wolfgang Grandegger <wg@grandegger.com>
Cc: Marc Kleine-Budde <mkl@pengutronix.de>
Cc: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Cc: Andreas Koensgen <ajk@comnets.uni-bremen.de>
Cc: Jeremy Kerr <jk@codeconstruct.com.au>
Cc: Matt Johnston <matt@codeconstruct.com.au>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230810091510.13006-16-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
./sound/soc/sof/intel/lnl.c: hda.h is included more than once.
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230810005555.4610-1-yang.lee@linux.alibaba.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add software reset before setting preset registers to make sure
all the registers are the default value before preset.
Signed-off-by: Jack Yu <jack.yu@realtek.com>
Link: https://lore.kernel.org/r/4f405c7deb9642e1a8599c5f103b5759@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
All I2C Dell Oasis models using CS35L41 have been changed to use SPI.
In addition, System 10280cc5 is no longer required.
Fixes: de90f5165b ("ALSA: hda/realtek: Add support for DELL Oasis 13/14/16 laptops")
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230809142957.675933-3-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
These HP G11 laptops use Realtek HDA codec combined with
2xCS35L41 Amplifiers using SPI or I2C with External Boost.
Laptop 103c8c26 has been removed as this has been replaced
by this new series of laptops.
Fixes: 3e10f6ca76 ("ALSA: hda/realtek: Add quirk for HP EliteBook G10 laptops")
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230809142957.675933-2-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Hard-coded stream format parameters are added for Weiss Engineering
FireWire devices. When the device vendor and model match, the parameters
are copied into the stream format cache. This allows for setting all
supported sampling rates up to 192kHz, and consequently adjusting the
number of available I/O channels.
Signed-off-by: Rolf Anderegg <rolf.anderegg@weiss.ch>
Signed-off-by: Michele Perrone <michele.perrone@weiss.ch>
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20230809002631.750120-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Clang warns (or errors with CONFIG_WERROR):
sound/soc/sof/intel/hda.c:423:6: error: variable 'chip' is uninitialized when used here [-Werror,-Wuninitialized]
423 | if (chip && chip->check_sdw_wakeen_irq)
| ^~~~
sound/soc/sof/intel/hda.c:418:39: note: initialize the variable 'chip' to silence this warning
418 | const struct sof_intel_dsp_desc *chip;
| ^
| = NULL
1 error generated.
Add the missing initialization, following the pattern of the other irq
functions.
Fixes: 9362ab78f1 ("ASoC: SOF: Intel: add abstraction for SoundWire wake-ups")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230809-intel-hda-missing-chip-init-v1-1-61557ca6fa8a@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
When the tdm lane mask is computed, the driver currently fills the 1st lane
before moving on to the next. If the stream has less channels than the
lanes can accommodate, slots will be disabled on the last lanes.
Unfortunately, the HW distribute channels in a different way. It distribute
channels in pair on each lanes before moving on the next slots.
This difference leads to problems if a device has an interface with more
than 1 lane and with more than 2 slots per lane.
For example: a playback interface with 2 lanes and 4 slots each (total 8
slots - zero based numbering)
- Playing a 8ch stream:
- All slots activated by the driver
- channel #2 will be played on lane #1 - slot #0 following HW placement
- Playing a 4ch stream:
- Lane #1 disabled by the driver
- channel #2 will be played on lane #0 - slot #2
This behaviour is obviously not desirable.
Change the way slots are activated on the TDM lanes to follow what the HW
does and make sure each channel always get mapped to the same slot/lane.
Fixes: 1a11d88f49 ("ASoC: meson: add tdm formatter base driver")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20230809171931.1244502-1-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The sof_ipc4_update_resource_usage() call updates the CPC value in basecfg
and it must be done prior to making a copy of the copier configuration
for the init message.
Other module types do the resource update as last step or in case of a
process module at the correct time, before the memcpy.
Fixes: d8a2c98793 ("ASoC: SOF: ipc4-loader/topology: Query the CPC value from manifest")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Adrian Bonislawski <adrian.bonislawski@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Chao Song <chao.song@linux.intel.com>
Link: https://lore.kernel.org/r/20230809125656.27585-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
'Headphone Switch' control is already registered from
sound/soc/codecs/wm_hubs.c:479, so duplicating it in midas_wm1811
causes following probe failure:
midas-audio sound: control 2:0:0:Headphone Switch:0 is already present
midas-audio sound: ASoC: Failed to add Headphone Switch: -16
midas-audio sound: Failed to register card: -16
midas-audio: probe of sound failed with error -16
Fix this by dropping duplicated control.
Fixes: d27224a45e ("ASoC: samsung: midas_wm1811: Map missing jack kcontrols")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20230809100446.2105825-1-m.szyprowski@samsung.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We need to call of_node_put() when break from
for_each_child_of_node(). This patch add missing
of_node_put().
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Julia Lawall <julia.lawall@inria.fr>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87bkfh9g68.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When cs35l56_system_resume() needs to reload firmware it should call
wm_adsp_power_down() to put cs_dsp into a powered-down state before
cs35l56_secure_patch() or cs35l56_patch() calls wm_adsp_power_up().
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230808164702.21272-6-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
To support self-booting DSPs that operate outside of a conventional DAPM
event life cycle expose a companion function to wm_adsp_power_up() so
that the correct state of the DSP firmware and controls can be recorded.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230808164702.21272-5-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The CS35L56 could be hard-reset during a system suspend-resume cycle,
either by the codec driver, in cs35l56_system_resume_early(), or by ACPI.
After a hard reset the driver must wait for the control port to be ready
(datasheet tIRS time) before attempting to access the CS35L56.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230808164702.21272-4-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The ACPI setting for a GPIO default state has higher priority than the
flag passed to devm_gpiod_get_optional() so ACPI can override the
GPIOD_OUT_LOW. Explicitly set the GPIO low when hard resetting.
Although GPIOD_OUT_LOW can't be relied on this doesn't seem like a
reason to stop passing it to devm_gpiod_get_optional(). So we still pass
it to state our intent, but can deal with it having no effect.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230808164702.21272-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Re-implement setting of ASP TDM slots so that only the common loop to
build the register word is factored out.
The original cs35l56_set_asp_slot_positions() had an apparent
uninitialized variable if the passed register address was neither of the
ASP slot registers. In fact this would never happen because the calling
code passed valid registers.
While it's trivial to initialize the variable or add a default case,
actually the only common code was the loop at the end of the function,
which simply manipulates some mask values and is identical for either
register. Factoring out the regmap_write() didn't really gain anything.
So instead re-implement the code to replace the original function with
cs35l56_make_tdm_config_word() that only does the loop, and change the
calling code to call regmap_write() directly.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230808164702.21272-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
aw88261_reg_update() returns an unintialized error code in the
success path:
sound/soc/codecs/aw88261.c:651:7: error: variable 'ret' is used uninitialized whenever 'if' condition is false [-Werror,-Wsometimes-uninitialized]
if (aw_dev->prof_cur != aw_dev->prof_index) {
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
sound/soc/codecs/aw88261.c:660:9: note: uninitialized use occurs here
return ret;
^~~
sound/soc/codecs/aw88261.c:651:3: note: remove the 'if' if its condition is always true
if (aw_dev->prof_cur != aw_dev->prof_index) {
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Return zero instead here.
Fixes: 028a2ae256 ("ASoC: codecs: Add aw88261 amplifier driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230808125703.1611325-1-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Now the first device on a link is not treated specially there is no
need to have a separate loop to handle the current link over the
future links, as the logic is identical. Combine this all into a
single processing loop.
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230808132013.889419-12-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If the current code encounters a new type of device on a SoundWire
link, it will abort processing that link and move onto the next
link. However, there is no reason to disallow this setup, it would
appear this was being disallowed to work around issues introduced
by only the first endpoint on each link being checked, which is now
fixed.
The device type shouldn't determine which DAI link it is connected to,
the group ID and aggregation status should.
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230808132013.889419-11-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The current code checks the first device on a link and assumes
that all the other devices on the link will have the same endpoint
aggregation status and endpoint group ID.
Say for example a system looked like:
SDW0 - Amp 1 (Aggregated, Group 1), Mic 1 (Aggregated, Group 2)
SDW1 - Amp 2 (Aggregated, Group 1), Mic 2 (Aggregated, Group 2)
The current code would create the DAI link for the aggregated amps,
although it is worth noting that the only reason Mic 2 is not added is
the additional check that aborts processing the link when the device
changes. Then when processing the DAI link for the microphones, Mic
2 would not be added, as the check will only be done on the first
device, which would be Amp 2 and thus the wrong group, causing the
whole link to be skipped.
Move the endpoint check to be for each device rather than the first
device on each link.
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230808132013.889419-10-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The current loops at the top of create_sdw_dailink process the devices
on each link starting from device index adr_index. But adr_index is only
meaningful on the first on these SoundWire links, as it is the index of
the current device on that link. This means devices will be skipped on
later links.
Say for example the system looks like this:
SDW0 - Codec (Not Aggregated), Amp 1 (Aggregated, Group 1)
SDW1 - Amp 2 (Aggregated, Group 1), Amp 3 (Aggregated, Group 1)
The code should create 2 DAI links, one for the CODEC and one for the
aggregated amps. It will create the DAI link for the codec no problem.
When it creates the DAI link for Group 1 however, create_sdw_dailink
will be called with an adr_index of 1, since that is the index of Amp
1 on SDW0. However, as the loop in create_sdw_dailink moves onto SDW1
it will again start from adr_index, skipping Amp 2. Resulting in the amp
DAI link only have amps 1 and 3 in it.
It is reasonable to start at adr_index on the first link, since
earlier devices have by definition already been processed. However,
update the code when processing later links to handle all devices.
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230808132013.889419-9-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There are two problems with the current range check on the codec_conf
array.
Firstly, adr_link_next->num_adr refers to the number of devices
on the current SoundWire link, but adr_index refers to the first
SoundWire link involved in the DAI link. This means that subtracting
these two numbers is only meaningful on the first SoundWire link in the
DAI and broken on later links.
Secondly, the intention of the range check is to add the number
of remaining devices on the currently link to the current index
and ensure enough space remains. However, this assumes that all
remaining devices on the SoundWire link will be added to the current
DAI link. Ideally this would not be the case, and devices could be
grouped as the user desired.
Moving the range check into the inner loop both simplifies the code (no
need to add and subtract offsets) and allows future refactoring such
that devices on a single SoundWire link don't have to all be grouped onto
a single DAI link. The check will be processed slightly more often since
it is processed for each device rather each link but this is probe time
and the numbers involved are very small here (4 links, likely no more
than 2-4 devices per link).
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230808132013.889419-8-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In create_sdw_dailink, rather than bulk updating the index into the
DAI link components array, at the end of processing a link, do so each
time the code adds a new component. This simplifies things slightly,
as an intermediate variable is no longer needed to track the current
place in the DAI link components array.
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230808132013.889419-7-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The loops which fill the codec DAI link component structures are split
across create_sdw_dailink and create_codec_dai_name. This causes the
code to be rather confusing, needing to return out the function to allow
the upper loop to iterate. Remove the create_codec_dai_name helper and
pull its code up into create_sdw_dailink, this makes it more obvious
what is happening in the code. This patch makes no functional change
just hoists the code up a level.
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230808132013.889419-6-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a helper function to create a single codec DAI link component
structure. This sets things up for more refactoring of the creating of
the DAI links.
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230808132013.889419-5-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Move the check for a valid group id into get_dailink_info as
well. This does cause a slight change in behaviour in that the system
will return an error rather than just ignoring the link with an
invalid group id. There are presently no systems with invalid group
ids in mainline and failing seems more appropriate since it will
better highlight the code needs fixing.
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230808132013.889419-4-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
As get_dailink_info spins through all the links anyway simply check the
link masks there. This saves an extra check and means the code will
fail earlier if the mask is invalid.
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230808132013.889419-3-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
get_dailink_info already checked if the adr_link pointer was NULL so
there is no need to recheck later in sof_card_dai_links_create.
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230808132013.889419-2-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add the missing new lines.
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230808132013.889419-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The module_rpmsg_driver() will set "THIS_MODULE" to driver.owner when
register a rpmsg_driver driver, so it is redundant initialization to set
driver.owner in the statement. Remove it for clean code.
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Link: https://lore.kernel.org/r/20230808021728.2978035-1-lizetao1@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The RT5682, RT1015 and RT1015p codecs used in this driver do not seem
capable of distinguishing Line Out connections from Headphone, but
the driver configures its jack object as if it can. Remove the wrong
value from the jack creation call to avoid any confusion.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Tested-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Link: https://lore.kernel.org/r/20230805162216.441410-1-alpernebiyasak@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
With IPC3, we reset hw_params during the stop trigger, so we should also
clean up the link DMA during the stop trigger.
Fixes: 1bf83fa665 ("ASoC: SOF: Intel: hda-dai: Do not perform DMA cleanup during stop")
Closes: https://github.com/thesofproject/linux/issues/4455
Closes: https://github.com/thesofproject/linux/issues/4482
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217673
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230808110627.32375-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
`strncpy` is deprecated for use on NUL-terminated destination strings [1].
A suitable replacement is `strscpy` [2] due to the fact that it
guarantees NUL-termination on its destination buffer argument which is
_not_ the case for `strncpy`!
It should be noted that the current implementation is unlikely to have a
bug because `drv_name` is a string literal with a size of 9 while
`card->driver` has a size of 16. However, it is probably worthwhile to
switch to a more robust and less ambiguous interface.
[1]: www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings
[2]: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html
Link: https://github.com/KSPP/linux/issues/90
Cc: linux-hardening@vger.kernel.org
Signed-off-by: Justin Stitt <justinstitt@google.com>
Link: https://lore.kernel.org/r/20230807-sound-pci-hda-v1-1-6d9cdcd085ca@google.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Remove redundant definitions of DEVNAME and CARD_NAME, as they're not
useful. The former is not used anywhere, and the latter is used only
in module parameters descriptions.
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Link: https://lore.kernel.org/r/20230804110740.9867-2-ivan.orlov0322@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Trigger callback is not the best place for buffer iterator
initialization, so move it out to the prepare callback, where it
have to be.
Minor enhancement: remove blank line.
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Link: https://lore.kernel.org/r/20230804110740.9867-1-ivan.orlov0322@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
This patchset first fixes a number of errors made in the hda-mlink
support, then adds Lunar Lake definitions. The main contribution is
the hda-dai changes where the HDaudio DMA is now used for SSP, DMIC
and SoundWire. In previous hardware the GPDMA (aka DesignWare) was
used and controlled by the audio firmware. The volume of code is
minimized with the abstraction added in previous kernel cycles.
Due to cross-dependencies between ASoC and SoundWire trees, the full
support for jack detection will be deferred to the next kernel
cycle. There's not much point to ask for a sync of the two trees to
support one patch for each tree - we are at -rc5 already.
Experimental results show that the headset is only detected with the
JD2 quirk.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20230807215000.515846-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When using more than one sublink for amplifier aggregation, we need to
add the sublink info to debug the programming sequences.
No functional change, only additional precisions in the log.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20230807210959.506849-21-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
A pipeline is identified by two indices: 'instance_id' and 'pipeline_id'
This is clearly seen in kernel logs when creating a pipeline
"Create widget pipeline.20 instance 0 - pipe 20 - core 0"
but other logs are less clear
"ipc4 set pipeline 1 state 4"
Change definitions and logs to make sure the logs clearly identify
which of the two indices are used in state transitions.
No functional change.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20230807210959.506849-20-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The solution used before LunarLake relies on a 'Multi-gateway'
firmware configuration. This is no longer needed with the DMA hardware
handling multiple links directly. To avoid adding a platform-specific
quirk in the generic IPC4 code, this patch resets the device count
when fetching the stream context.
Suggested-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20230807210959.506849-19-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We need to retrieve the current value to deal with the HDAudio
WAKEEN/WAKESTS setup.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20230807210959.506849-18-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The existing code cannot work for LunarLake, let's add a layer of
abstraction.
No functional change in this patch.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20230807210959.506849-17-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
These callbacks are just wrappers to keep the code relatively clean.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20230807210959.506849-16-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
During the hw_params and hw_free stages, we need to map the stream tag
and channels in the PCMSyCM registers.
The trigger callback is just a wrapper.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20230807210959.506849-15-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Same abstraction as SSP/DMIC, with only the get_hlink helper changing.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20230807210959.506849-14-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When we have multiple CPU DAIs in a dailink, typically for SoundWire
aggregated solutions with amplifiers on multiple links, we only want
to allocate one HDaudio stream_tag. The simplest solution is to
allocate the hext_stream/stream_tag for the DAI with index 0 in the
dailink, and reuse the same stream for all other CPU DAIs.
This assumption relies on serialization of DAIs by the ASoC core,
where all CPU DAIs are handled in a loop.
The stream release follows the same idea of releasing the tag for the
first DAI only. Ideally we would want the loop to be handled in
reverse-order to summetry, but there is no risk of reusing a
stream_tag which is no longer valid.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20230807210959.506849-13-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We can reuse the same helpers as for SSP, with just the link type
being different.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Jaska Uimonen <jaska.uimonen@linux.intel.com>
Link: https://lore.kernel.org/r/20230807210959.506849-12-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add new ops for SSP.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230807210959.506849-11-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The DMA widget ops are almost similar to the HDaudio ones, with the
exception of codec_dai_set_hext_stream() which is not relevant and the
format calculation which isn't dependent on the codec dai.
The DMA ops can be selected only starting with ACE_2_0.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230807210959.506849-10-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In the LunarLake hardware, the default IP ownership changed to the
host driver, instead of the firmware in previous generation.
In the absence of any capability negotiation, we need to assume a
fixed partitioning between host driver and firmware. The OFLEN bit
needs to be set as early as possible for resources handled by the
firmware, since we can't control when the firmware might try to access
the resources.
For now DMIC and SSP are handled by the DSP firmware. SoundWire is a
separate case, the OFLEN bit can be set when starting-up and resuming
the aux device for each link.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230807210959.506849-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
It was just a matter of time before we found a case where we needed
separate ops for MTL and LNL. For LNL we need to set the DMIC/SSP
OFLEN bit in the probe and resume steps, and this can only be done
cleanly with separate ops.
The function prototypes in mtl.h were added in the same order as their
implementation in mtl.c.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230807210959.506849-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add initial support for Lunarlake. For now only HDAudio interfaces are
supported, DMIC/SSP/SoundWire require additional work so that the DAIs
reuse the HDaudio DMA stream allocation.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230807210959.506849-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
All interfaces are accessible without the DSP and rely on the HDaudio
DMA only.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230807210959.506849-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The initial code had a logic flaw where the gateway config length kept
increasing after each playback/capture trigger, with the DMA config
TLV being added at every call of sof_ipc4_prepare_copier_module()
This didn't cause any issues with regular playback/capture, but this
was flagged as an error by firmware in the case of multiple amplifiers
on different links.
Fixes: a0659f81c3 ("ASoC: SOF: ipc4-topology: add DMA config TLV to IPC data")
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20230807210959.506849-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When a pipeline contains multiple DAI widgets, the pipe_widget is not
set up except for the first DAI. This result in the pipe_widget having
a default instance 0, which can conflict with another real the
pipeline instance 0 and leads to spurious transitions.
This patch makes sure the instance_id is properly initialized to a
-EINVAL value.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230807210959.506849-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Likely a combination of copy-paste and test coverage problem. Oops.
Fixes: 87a6ddc0cf ("ASoC: SOF: Intel: hda-mlink: program SoundWire LSDIID registers")
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20230807210959.506849-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The HCHAN parameter should be the highest channel number, not the
channel count.
While we're at it, handle LCHAN with the dual __ffs helper.
Fixes: ccc2f0c1b6 ("ASoC: SOF: Intel: hda-mlink: add helper to program SoundWire PCMSyCM registers")
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20230807210959.506849-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If SNDRV_PCM_IOCTL_PREPARE is called when the mixer settings linking
frontend and backend have not been setup yet this results in
e.g. the following errors getting logged:
[ 43.244549] Baytrail Audio Port: ASoC: no backend DAIs enabled for Baytrail Audio Port
[ 43.244744] Baytrail Audio Port: ASoC: error at dpcm_fe_dai_prepare on Baytrail Audio Port: -22
pipewire triggers this leading to 96 lines getting logged
after the user has logged into a GNOME session.
Change the actual "no backend DAIs enabled for ... Port" error to
dev_err_once() to avoid it getting repeated 48 times. While at it
also improve the error by hinting the user how to fix this.
To not make developing new UCM profiles harder, also log the error
at dev_dbg() level all the time (vs once). So that e.g. dyndbg can
be used to (re)enable the messages.
Also changes _soc_pcm_ret() to not log for -EINVAL errors, to fix
the other error getting logged 48 times. Userspace passing wrong
parameters should not lead to dmesg messages.
Link: https://gitlab.freedesktop.org/pipewire/pipewire/-/issues/3407
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230805171435.31696-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Alper Nebi Yasak <alpernebiyasak@gmail.com>:
This patchset adds missing jack kcontrols for each independently
detectable audio peripheral and maps jack pins to those kcontrols
accordingly, with the primary intent to enable/improve jack detection
handling in PulseAudio and PipeWire through JackControl UCM values.
Usually it's just splitting a joint anything-is-connected "Headset Jack"
kcontrol (from [1]) into those like "Headphone Jack" and "Headset Mic"
(similar to a previous series for Intel Chromebooks [2]). This split is
important to avoid automatically switching to a nonexistent external
microphone when a headphone-only device is connected.
When the underlying hardware seems to support it, this also adds a "Line
Out" kcontrol. This is important in case the hardware can actually
support a line-level connection via a different configuration (bypassing
output amplifiers?), or simply for userspace to display "Line Out"
instead of "Headphones" to the user for connected line-out devices.
Beyond the mappings, I had to add PIN_SWITCH card kcontrols and DAPM
widgets to avoid "unknown pin" errors on my devices, so tried to do them
for all. For Intel devices I saw a pattern of routing things to
"Platform Clock" and added to that as well. Looking at patch 5/7 of a
Mediatek-related series [3], I can only guess that routes could be
further improved, but don't know exactly how for each device. And one
more concern is I don't know if the names conflict with any controls
from codecs, although I tried to keep to names of existing widgets.
As far as I can tell, the root cause for most of why these are missing
originates to things being developed for ChromeOS, whose userspace reads
the jack input device and doesn't care for these kcontrols. There's
non-ChromeOS cases as well, maybe things got copy-pasted around and
people didn't need or couldn't figure out how to get more specific than
a single jack kcontrol. The secondary intent in this patchset is to fix
this *everywhere*, so future copy-pastes result in the right behaviour.
For more context also see:
[1] ASoC: soc-card: Create jack kcontrol without pins
https://lore.kernel.org/alsa-devel/20220408041114.6024-1-akihiko.odaki@gmail.com/
[2] ASoC: Intel: Chromebooks: remap jack pins
https://lore.kernel.org/alsa-devel/20220616214055.134943-1-pierre-louis.bossart@linux.intel.com/
[3] ASoC: mediatek: Allow separate handling of headphone and headset mic jack
https://lore.kernel.org/alsa-devel/20220922235951.252532-1-nfraprado@collabora.com/
[4] ASoC: rk3399_gru_sound: Add DAPM pins, kcontrols for jack detection
https://lore.kernel.org/alsa-devel/20200721182709.6895-1-alpernebiyasak@gmail.com/
This applies onto next-20230802. Unfortunately most of it is untested
except for a few Chromebooks I have (Kevin, Lick, Hana, Cozmo), because
I'm intentionally generalizing to everything.
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
This patchset improves the pm_runtime behavior in rare corner cases
identified by the Intel CI in the last 6 months.
a) in stress-tests, it's not uncommon to see the following type of
warnings when the codec reports as ATTACHED
"rt711 sdw:0:025d:0711:00: runtime PM trying to activate child device
sdw:0:025d:0711:00 but parent (sdw-master-0) is not active"
This warning was not correlated with any functional issue, but it
exposed a design issue on when to enable pm_runtime. The recommended
practice in the pm_runtime documentation is to keep the devices in
'suspended' mode and mark them as 'active' when they are really
functional.
b) enabling pm_runtime when the codec reports as ATTACHED also creates
a problematic case when the ASoC pm_runtime_get_sync() will silently
fail due to the -EACCESS error handling. This can happen when playback
starts before the codec is enumerated.
This patchset modifies the initial stages so that codecs are
pm_runtime enabled in the .probe() callback, but become pm_runtime
'active' only when they report present. This is better aligned with
the design of the pm_runtime helpers and improved CI results
significantly.
This patchset modifies all existing SoundWire codecs (except Qualcomm
ones), but the pattern of changes is exactly the same in all patches.
Here hdr is a pointer, and we should measure the size of
struct sof_ipc_cmd_hdr.
Fixes: 12c41c779f ("ASoC: SOF: Refactor rx function for fuzzing")
Signed-off-by: Xia Fukun <xiafukun@huawei.com>
Reviewed-by: Curtis Malainey <cujomalainey@chromium.org>
Link: https://lore.kernel.org/r/20230807075118.128122-1-xiafukun@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If SNDRV_PCM_IOCTL_PREPARE is called when the mixer settings linking
frontend and backend have not been setup yet this results in
e.g. the following errors getting logged:
[ 43.244549] Baytrail Audio Port: ASoC: no backend DAIs enabled for Baytrail Audio Port
[ 43.244744] Baytrail Audio Port: ASoC: error at dpcm_fe_dai_prepare on Baytrail Audio Port: -22
pipewire triggers this leading to 96 lines getting logged
after the user has logged into a GNOME session.
Change the actual "no backend DAIs enabled for ... Port" error to
dev_err_once() to avoid it getting repeated 48 times. While at it
also improve the error by hinting the user how to fix this.
To not make developing new UCM profiles harder, also log the error
at dev_dbg() level all the time (vs once). So that e.g. dyndbg can
be used to (re)enable the messages.
Also changes _soc_pcm_ret() to not log for -EINVAL errors, to fix
the other error getting logged 48 times. Userspace passing wrong
parameters should not lead to dmesg messages.
Link: https://gitlab.freedesktop.org/pipewire/pipewire/-/issues/3407
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230805171435.31696-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache. In
v6.5 it has also acquired the ability to generate multi-register writes in
sync operations, bringing performance up to parity with the rbtree cache
there.
Update the jz4740 driver to use the more modern data structure.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230712-asoc-jz-maple-v1-1-3f745adf96e5@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Reformat the code to match Linuxn coding style: re-indent continued
lines and stop too-early line wrapping, drop unneeded {} brackets. No
functional impact.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230730201826.70453-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
MAX98926 and MAX98927 are quite similar and use the same bindings,
although drivers were not implementing them in the same way:
MAX98926 has boolean "interleave-mode" but MAX98927 has uint32
"interleave_mode". Unify them under maxim,interleave-mode, already used
in other Maxim device.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230730201826.70453-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This driver does not map jack pins to kcontrols that PulseAudio/PipeWire
need to handle jack detection events. The WM1811 codec used here seems
to support detecting Headphone and Headset Mic connections. Expose each
to userspace as a kcontrol and add the necessary widgets.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Link: https://lore.kernel.org/r/20230802175737.263412-28-alpernebiyasak@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This driver has correctly mapped jack kcontrols for Headphone and
Headset Mic. However, it is also mapping Line Out jack detection events
to the Headphone kcontrol.
The WM5100 codec used here can distinguish Line Out connections from
Headphone connections. Decouple the two, expose Line Out to userspace as
an independent kcontrol and add the necessary widget.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Link: https://lore.kernel.org/r/20230802175737.263412-27-alpernebiyasak@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This driver does not properly map jack pins to kcontrols that PulseAudio
and PipeWire need to handle jack detection events. The WM8958 codec used
here can detect Headphone and Headset Mic connections. Expose each to
userspace as a kcontrol and add the necessary widgets.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Link: https://lore.kernel.org/r/20230802175737.263412-26-alpernebiyasak@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This driver does not properly map jack pins to kcontrols that PulseAudio
and PipeWire need to handle jack detection events. The RT5645 codec used
here supports detecting Headphone and Headset Mic connections. Expose
both to userspace as kcontrols.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Link: https://lore.kernel.org/r/20230802175737.263412-25-alpernebiyasak@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit d0508b4f16 ("ASoC: rk3399_gru_sound: Add DAPM pins, kcontrols
for jack detection") maps kcontrols for Headphones and Headset Mic jacks
for this driver so that PulseAudio and PipeWire can handle insertion
events for these peripherals.
The DA7219 codec used here can also distinguish between Headphone and
Line Out connections that go into the same physical port. Expose the
latter to userspace as a kcontrol as well and add the necessary widget.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Link: https://lore.kernel.org/r/20230802175737.263412-24-alpernebiyasak@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This driver does not properly map jack pins to kcontrols that PulseAudio
and PipeWire need to handle jack detection events. The RT5663 codec used
here can detect Headphone and Headset Mic connections. Expose each to
userspace as a kcontrol.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Link: https://lore.kernel.org/r/20230802175737.263412-23-alpernebiyasak@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This driver does not properly map jack pins to kcontrols that PulseAudio
and PipeWire need to handle jack detection events. The RT5682 and
RT5682s codecs used here can detect Headphone and Headset Mic
connections. Expose each to userspace as a kcontrol.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Link: https://lore.kernel.org/r/20230802175737.263412-22-alpernebiyasak@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This driver does not properly map jack pins to kcontrols that PulseAudio
and PipeWire need to handle jack detection events. The RT5682 and
RT5682s codecs used here can detect Headphone and Headset Mic
connections. Expose each to userspace as a kcontrol.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Link: https://lore.kernel.org/r/20230802175737.263412-21-alpernebiyasak@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This driver does not properly map jack pins to kcontrols that PulseAudio
and PipeWire need to handle jack detection events. It seems to support
detecting Headphone and Headset Mic connections. Expose each to
userspace as a kcontrol and add the necessary widgets.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Link: https://lore.kernel.org/r/20230802175737.263412-20-alpernebiyasak@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit 8e98674868 ("ASoC: mediatek: mt8186-da7219: Expose individual
headset jack pins") maps kcontrols for Headphone and Headset Mic jacks
for this driver so that PulseAudio and PipeWire can handle jack
detection events for these peripherals.
The DA7219 codec used here can also distinguish between Headphone and
Line Out connections that go into the same physical port. Expose the
latter to userspace as a kcontrol as well and add the necessary widgets.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Link: https://lore.kernel.org/r/20230802175737.263412-19-alpernebiyasak@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This driver does not properly map jack pins to kcontrols that PulseAudio
and PipeWire need to handle jack detection events. The TS3A227 component
used here can detect Headphones and Headset Mic connections. Expose each
to userspace as kcontrols and add the necessary widgets.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Link: https://lore.kernel.org/r/20230802175737.263412-18-alpernebiyasak@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This driver does not properly map jack pins to kcontrols that PulseAudio
and PipeWire need to handle jack detection events. The DA7219 codec used
here can detect Headphones, Headset Mic and Line Out connections. Expose
each to userspace as kcontrols and add the necessary widgets.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Link: https://lore.kernel.org/r/20230802175737.263412-17-alpernebiyasak@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This driver does not properly map jack pins to kcontrols that PulseAudio
and PipeWire need to handle jack detection events. The RT5645 codec used
here can detect Headphone and Headset Mic connections. Expose both to
userspace as kcontrols.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Link: https://lore.kernel.org/r/20230802175737.263412-16-alpernebiyasak@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This driver does not properly map jack pins to kcontrols that PulseAudio
and PipeWire need to handle jack detection events. The RT5645 codec used
here can detect Headphone and Headset Mic connections. Expose both to
userspace as kcontrols.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Link: https://lore.kernel.org/r/20230802175737.263412-15-alpernebiyasak@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This driver does not properly map jack pins to kcontrols that PulseAudio
and PipeWire need to handle jack detection events. The RT5645 codec used
here can detect Headphone and Headset Mic connections. Expose each to
userspace as kcontrols.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Link: https://lore.kernel.org/r/20230802175737.263412-14-alpernebiyasak@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This driver has correctly mapped jack kcontrols for Headphone and
Headset Mic. However, it is configuring the jack to only care about
Headphone events. The MAX98090 codec used here can detect both
connections, so configure the jack as such.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Link: https://lore.kernel.org/r/20230802175737.263412-13-alpernebiyasak@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This driver does not properly map jack pins to kcontrols that PulseAudio
and PipeWire need to handle jack detection events. It seems to have a
single detection GPIO pin used to report everything as a Headset. But it
has widgets for Headphone and Mic Jack, so expose both to userspace as
kcontrols.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Link: https://lore.kernel.org/r/20230802175737.263412-12-alpernebiyasak@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit 2913bb1f68 ("ASoC: Intel: sof_da7219_max98373: remap jack
pins") maps kcontrols for Headphone and Headset Mic jacks for this
driver so that PulseAudio and PipeWire can handle jack detection events
for these peripherals.
The DA7219 codec used here can also distinguish between Headphone and
Line Out connections that go into the same physical port. Expose the
latter to userspace as a kcontrol as well and add the necessary widgets.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Link: https://lore.kernel.org/r/20230802175737.263412-11-alpernebiyasak@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit b9f53b9fc1 ("ASoC: Intel: kbl_da7219_max98927: remap jack
pins") maps kcontrols for Headphone and Headset Mic jacks for this
driver so that PulseAudio and PipeWire can handle jack detection events
for these peripherals.
The DA7219 codec used here can also distinguish between Headphone and
Line Out connections that go into the same physical port. Expose the
latter to userspace as a kcontrol as well and add the necessary widgets.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Link: https://lore.kernel.org/r/20230802175737.263412-10-alpernebiyasak@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit c2065d43ae ("ASoC: Intel: kbl_da7219_max98357a: remap jack
pins") maps kcontrols for Headphone and Headset Mic jacks for this
driver so that PulseAudio and PipeWire can handle jack detection events
for these peripherals.
The DA7219 codec used here can also distinguish between Headphone and
Line Out connections that go into the same physical port. Expose the
latter to userspace as a kcontrol as well and add the necessary widgets.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Link: https://lore.kernel.org/r/20230802175737.263412-9-alpernebiyasak@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit ecd77d494e ("ASoC: Intel: bytcr_wm5102: Add jack detect
support") maps kcontrols for Headphone and Headset Mic jacks for this
driver so that PulseAudio and PipeWire can handle jack detection events
for these peripherals.
The WM5102 codec used here can also distinguish between Headphone and
Line Out connections that go into the same physical port. Expose the
latter to userspace as a kcontrol as well and add the necessary widgets.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Link: https://lore.kernel.org/r/20230802175737.263412-8-alpernebiyasak@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit bbdd4ea219 ("ASoC: Intel: bxt_da7219_max98357a: remap jack
pins") maps kcontrols for Headphone and Headset Mic jacks for this
driver so that PulseAudio and PipeWire can handle detection events for
these peripherals.
The DA7219 codec used here can also distinguish between Headphone and
Line Out connections that go into the same physical port. Expose the
latter to userspace as a kcontrol as well and add the necessary widgets.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Link: https://lore.kernel.org/r/20230802175737.263412-7-alpernebiyasak@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This driver does not properly map jack pins to kcontrols that PulseAudio
and PipeWire need to handle jack detection events. The DA7219 codec used
here can detect Headphones, Headset Mic and Line Out connections. Expose
each to userspace as kcontrols and add the necessary widgets.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Link: https://lore.kernel.org/r/20230802175737.263412-6-alpernebiyasak@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This driver does not properly map jack pins to kcontrols that PulseAudio
and PipeWire need to handle jack detection events. The RT5682, RT1015
and RT1015p codecs used here can detect Headphone and Headset Mic
connections. Expose the former two to userspace as kcontrols.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Link: https://lore.kernel.org/r/20230802175737.263412-5-alpernebiyasak@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This driver does not properly map jack pins to kcontrols that PulseAudio
and PipeWire need to handle jack detection events. The RT5682, RT5682s,
NAU8825 and NAU8821 codecs used here can detect Headphone and Headset
Mic connections. Expose both to userspace as kcontrols and add the
necessary widgets. Split the jack and pin structs per-codec to
accommodate for per-codec differences.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Link: https://lore.kernel.org/r/20230802175737.263412-4-alpernebiyasak@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This driver does not properly map jack pins to kcontrols that PulseAudio
and PipeWire need to handle jack detection events. The RT5645 codec used
here can detect Headphone and Headset Mic connections. Expose both to
userspace as kcontrols.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Link: https://lore.kernel.org/r/20230802175737.263412-3-alpernebiyasak@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This driver does not properly map jack pins to kcontrols that PulseAudio
and PipeWire need to handle jack detection events. The DA7219 codec used
here can detect Headphones, Headset Mic and Line Out connections. Expose
each to userspace as kcontrols and add the necessary widgets.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Link: https://lore.kernel.org/r/20230802175737.263412-2-alpernebiyasak@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch suggests enabling pm_runtime during the probe, but marking the
device as 'active' only after it is enumerated. That will force a
dependency between the card and the codec, pm_runtime_get_sync() will
have to wait for the codec device to resume and hence implicitly wait
for the enumeration/initialization to be completed. In the nominal
case where the codec device is already active the get_sync() would
only perform a ref-count increase.
The changes are directly inspired by RT711 and RT711-sdca changes.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230802153629.53576-17-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch suggests enabling pm_runtime during the probe, but marking the
device as 'active' only after it is enumerated. That will force a
dependency between the card and the codec, pm_runtime_get_sync() will
have to wait for the codec device to resume and hence implicitly wait
for the enumeration/initialization to be completed. In the nominal
case where the codec device is already active the get_sync() would
only perform a ref-count increase.
The changes are directly inspired by RT711 and RT711-sdca changes.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230802153629.53576-16-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch suggests enabling pm_runtime during the probe, but marking the
device as 'active' only after it is enumerated. That will force a
dependency between the card and the codec, pm_runtime_get_sync() will
have to wait for the codec device to resume and hence implicitly wait
for the enumeration/initialization to be completed. In the nominal
case where the codec device is already active the get_sync() would
only perform a ref-count increase.
The changes are directly inspired by RT711 and RT711-sdca changes.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230802153629.53576-15-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch suggests enabling pm_runtime during the probe, but marking the
device as 'active' only after it is enumerated. That will force a
dependency between the card and the codec, pm_runtime_get_sync() will
have to wait for the codec device to resume and hence implicitly wait
for the enumeration/initialization to be completed. In the nominal
case where the codec device is already active the get_sync() would
only perform a ref-count increase.
The changes are directly inspired by RT711 and RT711-sdca changes.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230802153629.53576-14-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
