The dump command for reading a region passes a requested read length
specified in words (4-byte units). The response overwrites the same field
with the actual number of bytes read.
The mailbox handler for DUMP which reads VPD data (region 23) is treating
the response field as if it were still a word_cnt, thus multiplying it by 4
to set the read's "length". Given the read value was calculated based on
the size of the read buffer, the longer response length runs off the end of
the buffer.
Fix by reworking the code to use the response field as a byte count.
Link: https://lore.kernel.org/r/20210421234511.102206-1-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
lpfc_bsg_ct_unsol_event() routine acts assigns a ct_request to the wrong
structure address, resulting in a bad address that results in bsg related
timeouts.
Correct the ct_request assignment to use the kernel virtual buffer address
(not the control structure address).
Link: https://lore.kernel.org/r/20210421234448.102132-1-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In devloss timer handler and in backend calls to terminate remote port I/O,
there is logic to walk through all active IOCBs and validate them to
potentially trigger an abort request. This logic is causing illegal memory
accesses which leads to a crash. Abort IOCBs, which may be on the list, do
not have an associated lpfc_io_buf struct. The driver is trying to map an
lpfc_io_buf struct on the IOCB and which results in a bogus address thus
the issue.
Fix by skipping over ABORT IOCBs (CLOSE IOCBs are ABORTS that don't send
ABTS) in the IOCB scan logic.
Link: https://lore.kernel.org/r/20210421234433.102079-1-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Update copyrights to 2021 for files modified in the 12.8.0.9 patch set.
Link: https://lore.kernel.org/r/20210412013127.2387-17-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Update lpfc version to 12.8.0.9
Link: https://lore.kernel.org/r/20210412013127.2387-16-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
During code inspection, several cases of creating a dynamic attribute names
in logs messages using a define was found. This is unnecessary.
Place the native symbol name in the log messages.
Link: https://lore.kernel.org/r/20210412013127.2387-15-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Code inspection showed lpfc was using three different pointer formats when
logging discovery object pointers.
Standardize the pointer format to x%px.
Note: %px use is limited to discovery objects in order to aid core
analysis.
Link: https://lore.kernel.org/r/20210412013127.2387-14-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Clean up minor issues spotted by tools and code review:
- Spelling Errors
- Spurious characters and errors in function headers
- nvme_info wqerr and err fields source data reversed
- Extraneous new line in log message 0466
- Spacing error in log message 0109
- Messages 0140 and 0141 have portname and nodename reversed
- Incorrect function labelling in comment
Link: https://lore.kernel.org/r/20210412013127.2387-13-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
SLI-4 does not contain a PORT_CAPABILITIES mailbox command (only SLI-3
does, and SLI-3 doesn't use it), yet there are SLI-4 code paths that have
code to issue the command. The command will always fail.
Remove the code for the mailbox command and leave only the resulting
"failure path" logic.
Link: https://lore.kernel.org/r/20210412013127.2387-12-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The lpfc_hdw_queue attribute is to set the number of hardware queues to be
created on the adapter. Normally, the value is set to a default, which
allows the hw queue count to be sized dynamically based on adapter
capabilities, CPU/platform architecture, or CPU type. Currently, when
lpfc_hdw_queue is set to a specific value, is has no effect and the dynamic
sizing occurs.
The routine checking whether parameters are default or not ignores the
lpfc_hdw_queue setting and invokes the dynamic logic.
Fix the routine to additionally check the lpfc_hdw_queue attribute value
before using dynamic scaling. Additionally, SLI-3 supports only a small
number of queues with dedicated functions, thus it needs to be exempted
from the variable scaling and set to the expected values.
Link: https://lore.kernel.org/r/20210412013127.2387-11-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
FDMI registration needs to be performed after every login with the FC Mgmt
service. The flag the driver is using to track registration is cleared on
link up, but never on Mgmt service logout/re-login.
Fix by clearing the flag whenever a new login is completed with the FC Mgmt
service.
While perusing the flag use, logging was performed as if FDMI registration
occurred on vports. However, it is limited to the physical port only.
Revise the logging to reflect physical port based.
Link: https://lore.kernel.org/r/20210412013127.2387-10-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In the unlikely case of a failure to allocate an LPFC_MBOXQ_t structure, no
return status is set, thus the routine never logs an error and returns
success to the callee.
Fix by setting a return code on failure.
Link: https://lore.kernel.org/r/20210412013127.2387-9-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
During target port swap, the swap logic ignores the DROPPED flag in the
nodes. As a node then moves into the UNUSED state, the reference count will
be dropped. If a node is later reused and moved out of the UNUSED state, an
access can result in a use-after-free assert.
Fix by having the port swap logic propagate the DROPPED flag when switching
nodes. This will avoid reference from being dropped.
Link: https://lore.kernel.org/r/20210412013127.2387-8-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In SLI-4, when performing a mailbox command with MBX_POLL, the driver uses
the BMBX register to send the command rather than the MQ. A flag is set
indicating the BMBX register is active and saves the mailbox job struct
(mboxq) in the mbox_active element of the adapter. The routine then waits
for completion or timeout. The mailbox job struct is not freed by the
routine. In cases of timeout, the adapter will be reset. The
lpfc_sli_mbox_sys_flush() routine will clean up the mbox in preparation for
the reset. It clears the BMBX active flag and marks the job structure as
MBX_NOT_FINISHED. But, it never frees the mboxq job structure. Expectation
in both normal completion and timeout cases is that the issuer of the mbx
command will free the structure. Unfortunately, not all calling paths are
freeing the memory in cases of error.
All calling paths were looked at and updated, if missing, to free the mboxq
memory regardless of completion status.
Link: https://lore.kernel.org/r/20210412013127.2387-7-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
During target port-swap testing with link flips, the initiator could
encounter PRLI errors. If the target node disappears permanently, the ndlp
is found stuck in UNUSED state with ref count of 1. The rmmod of the driver
will hang waiting for this node to be freed.
While handling a link error in PRLI completion path, the code intends to
skip triggering the discovery state machine. However this is causing the
final reference release path to be skipped. This causes the node to be
stuck with ref count of 1
Fix by ensuring the code path triggers the device removal event on the node
state machine.
Link: https://lore.kernel.org/r/20210412013127.2387-6-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Remove hbalock dependency for lpfc_abts_els_sgl_list and
lpfc_abts_nvmet_ctx_list. The lists are adaquately synchronized with the
sgl_list_lock and abts_nvmet_buf_list_lock.
Link: https://lore.kernel.org/r/20210412013127.2387-5-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Call traces are being seen that result from a nodelist structure ref
counting error. They are typically seen after transmission of an LS_RJT ELS
response.
Aged code in lpfc_cmpl_els_rsp() calls lpfc_nlp_not_used() which, if the
ndlp reference count is exactly 1, will decrement the reference count.
Previously lpfc_nlp_put() was within lpfc_els_free_iocb(), and the 'put'
within the free would only be invoked if cmdiocb->context1 was not NULL.
Since the nodelist structure reference count is decremented when exiting
lpfc_cmpl_els_rsp() the lpfc_nlp_not_used() calls are no longer required.
Calling them is causing the reference count issue.
Fix by removing the lpfc_nlp_not_used() calls.
Link: https://lore.kernel.org/r/20210412013127.2387-4-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fix a crash caused by a double put on the node when the driver completed an
ACC for an unsolicted abort on the same node. The second put was executed
by lpfc_nlp_not_used() and is wrong because the completion routine executes
the nlp_put when the iocbq was released. Additionally, the driver is
issuing a LOGO then immediately calls lpfc_nlp_set_state to put the node
into NPR. This call does nothing.
Remove the lpfc_nlp_not_used call and additional set_state in the
completion routine. Remove the lpfc_nlp_set_state post issue_logo. Isn't
necessary.
Link: https://lore.kernel.org/r/20210412013127.2387-3-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Rmmod on SLI-4 adapters is sometimes hitting a bad ptr dereference in
lpfc_els_free_iocb().
A prior patch refactored the lpfc_sli_abort_iocb() routine. One of the
changes was to convert from building/sending an abort within the routine to
using a common routine. The reworked routine passes, without modification,
the pring ptr to the new common routine. The older routine had logic to
check SLI-3 vs SLI-4 and adapt the pring ptr if necessary as callers were
passing SLI-3 pointers even when not on an SLI-4 adapter. The new routine
is missing this check and adapt, so the SLI-3 ring pointers are being used
in SLI-4 paths.
Fix by cleaning up the calling routines. In review, there is no need to
pass the ring ptr argument to abort_iocb at all. The routine can look at
the adapter type itself and reference the proper ring.
Link: https://lore.kernel.org/r/20210412013127.2387-2-jsmart2021@gmail.com
Fixes: db7531d2b3 ("scsi: lpfc: Convert abort handling to SLI-3 and SLI-4 handlers")
Cc: <stable@vger.kernel.org> # v5.11+
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Pull 5.12/scsi-fixes into the 5.13 SCSI tree to provide a baseline for
some UFS changes that would otherwise cause conflicts during the
merge.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
gcc-11 warns about an strnlen with a length larger than the size of the
passed buffer:
drivers/scsi/lpfc/lpfc_attr.c: In function 'lpfc_nvme_info_show':
drivers/scsi/lpfc/lpfc_attr.c:518:25: error: 'strnlen' specified bound 4095 exceeds source size 24 [-Werror=stringop-overread]
518 | strnlen(LPFC_NVME_INFO_MORE_STR, PAGE_SIZE - 1)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In this case, the code is entirely valid, as the string is properly
terminated, and the size argument is only there out of extra caution in
case it exceeds a page.
This cannot really happen here, so just simplify it to a sizeof().
Link: https://lore.kernel.org/r/20210322160253.4032422-10-arnd@kernel.org
Fixes: afff0d2321 ("scsi: lpfc: Add Buffer overflow check, when nvme_info larger than PAGE_SIZE")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
If copy_from_user() or kstrtoull() fail then the correct behavior is to
return a negative error code.
Link: https://lore.kernel.org/r/YEsbU/UxYypVrC7/@mwanda
Fixes: f9bb2da11d ("[SCSI] lpfc 8.3.27: T10 additions for SLI4")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fixes the following W=1 kernel build warning(s):
drivers/scsi/lpfc/lpfc_nvme.c:2021: warning: Function parameter or member 'vport' not described in 'lpfc_nvme_create_localport'
Link: https://lore.kernel.org/r/20210312094738.2207817-16-lee.jones@linaro.org
Cc: James Smart <james.smart@broadcom.com>
Cc: Dick Kennedy <dick.kennedy@broadcom.com>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fixes the following W=1 kernel build warning(s):
drivers/scsi/lpfc/lpfc_bsg.c:3591: warning: expecting prototype for lpfc_bsg_mbox_ext_cleanup(). Prototype was for lpfc_bsg_mbox_ext_session_reset() instead
drivers/scsi/lpfc/lpfc_bsg.c:3885: warning: expecting prototype for lpfc_bsg_sli_cfg_mse_read_cmd_ext(). Prototype was for lpfc_bsg_sli_cfg_read_cmd_ext() instead
drivers/scsi/lpfc/lpfc_bsg.c:4371: warning: expecting prototype for lpfc_bsg_mbox_ext_abort_req(). Prototype was for lpfc_bsg_mbox_ext_abort() instead
Link: https://lore.kernel.org/r/20210312094738.2207817-14-lee.jones@linaro.org
Cc: James Smart <james.smart@broadcom.com>
Cc: Dick Kennedy <dick.kennedy@broadcom.com>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fixes the following W=1 kernel build warning(s):
drivers/scsi/lpfc/lpfc_debugfs.c:405: warning: expecting prototype for lpfc_debugfs_common_xri_data(). Prototype was for lpfc_debugfs_commonxripools_data() instead
Link: https://lore.kernel.org/r/20210312094738.2207817-13-lee.jones@linaro.org
Cc: James Smart <james.smart@broadcom.com>
Cc: Dick Kennedy <dick.kennedy@broadcom.com>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fixes the following W=1 kernel build warning(s):
drivers/scsi/lpfc/lpfc_attr.c:880: warning: expecting prototype for lpfc_state_show(). Prototype was for lpfc_link_state_show() instead
drivers/scsi/lpfc/lpfc_attr.c:3834: warning: expecting prototype for lpfc_tgt_queue_depth_store(). Prototype was for lpfc_tgt_queue_depth_set() instead
drivers/scsi/lpfc/lpfc_attr.c:4027: warning: expecting prototype for lpfc_topology_set(). Prototype was for lpfc_topology_store() instead
drivers/scsi/lpfc/lpfc_attr.c:4481: warning: expecting prototype for lpfc_link_speed_set(). Prototype was for lpfc_link_speed_store() instead
drivers/scsi/lpfc/lpfc_attr.c:4879: warning: expecting prototype for lpfc_request_firmware_store(). Prototype was for lpfc_request_firmware_upgrade_store() instead
drivers/scsi/lpfc/lpfc_attr.c:5235: warning: expecting prototype for lpfc_state_show(). Prototype was for lpfc_fcp_cpu_map_show() instead
Link: https://lore.kernel.org/r/20210312094738.2207817-5-lee.jones@linaro.org
Cc: James Smart <james.smart@broadcom.com>
Cc: Dick Kennedy <dick.kennedy@broadcom.com>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fixes the following W=1 kernel build warning(s):
drivers/scsi/lpfc/lpfc_scsi.c:746: warning: expecting prototype for lpfc_release_scsi_buf(). Prototype was for lpfc_release_scsi_buf_s3() instead
drivers/scsi/lpfc/lpfc_scsi.c:979: warning: expecting prototype for App checking is required for(). Prototype was for BG_ERR_CHECK() instead
drivers/scsi/lpfc/lpfc_scsi.c:3701: warning: Function parameter or member 'vport' not described in 'lpfc_scsi_prep_cmnd_buf'
drivers/scsi/lpfc/lpfc_scsi.c:3701: warning: Excess function parameter 'phba' description in 'lpfc_scsi_prep_cmnd_buf'
drivers/scsi/lpfc/lpfc_scsi.c:3717: warning: Function parameter or member 'fcpi_parm' not described in 'lpfc_send_scsi_error_event'
drivers/scsi/lpfc/lpfc_scsi.c:3717: warning: Excess function parameter 'rsp_iocb' description in 'lpfc_send_scsi_error_event'
drivers/scsi/lpfc/lpfc_scsi.c:3837: warning: Function parameter or member 'fcpi_parm' not described in 'lpfc_handle_fcp_err'
drivers/scsi/lpfc/lpfc_scsi.c:3837: warning: expecting prototype for lpfc_handler_fcp_err(). Prototype was for lpfc_handle_fcp_err() instead
drivers/scsi/lpfc/lpfc_scsi.c:4021: warning: Function parameter or member 'wcqe' not described in 'lpfc_fcp_io_cmd_wqe_cmpl'
drivers/scsi/lpfc/lpfc_scsi.c:4021: warning: Excess function parameter 'pwqeOut' description in 'lpfc_fcp_io_cmd_wqe_cmpl'
drivers/scsi/lpfc/lpfc_scsi.c:4621: warning: Function parameter or member 'vport' not described in 'lpfc_scsi_prep_cmnd_buf_s3'
drivers/scsi/lpfc/lpfc_scsi.c:4621: warning: Excess function parameter 'phba' description in 'lpfc_scsi_prep_cmnd_buf_s3'
drivers/scsi/lpfc/lpfc_scsi.c:4698: warning: Function parameter or member 'vport' not described in 'lpfc_scsi_prep_cmnd_buf_s4'
drivers/scsi/lpfc/lpfc_scsi.c:4698: warning: Excess function parameter 'phba' description in 'lpfc_scsi_prep_cmnd_buf_s4'
drivers/scsi/lpfc/lpfc_scsi.c:4954: warning: expecting prototype for lpfc_taskmgmt_def_cmpl(). Prototype was for lpfc_tskmgmt_def_cmpl() instead
drivers/scsi/lpfc/lpfc_scsi.c:5094: warning: expecting prototype for lpfc_poll_rearm_time(). Prototype was for lpfc_poll_rearm_timer() instead
Link: https://lore.kernel.org/r/20210312094738.2207817-4-lee.jones@linaro.org
Cc: James Smart <james.smart@broadcom.com>
Cc: Dick Kennedy <dick.kennedy@broadcom.com>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fixes the following W=1 kernel build warning(s):
drivers/scsi/lpfc/lpfc_hbadisc.c:1505: warning: expecting prototype for lpfc_update_fcf_record(). Prototype was for __lpfc_update_fcf_record() instead
Link: https://lore.kernel.org/r/20210303144631.3175331-28-lee.jones@linaro.org
Cc: James Smart <james.smart@broadcom.com>
Cc: Dick Kennedy <dick.kennedy@broadcom.com>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fixes the following W=1 kernel build warning(s):
drivers/scsi/lpfc/lpfc_ct.c:153: warning: Function parameter or member 'ct_req' not described in 'lpfc_ct_reject_event'
drivers/scsi/lpfc/lpfc_ct.c:153: warning: Function parameter or member 'rx_id' not described in 'lpfc_ct_reject_event'
drivers/scsi/lpfc/lpfc_ct.c:153: warning: Function parameter or member 'ox_id' not described in 'lpfc_ct_reject_event'
drivers/scsi/lpfc/lpfc_ct.c:283: warning: Function parameter or member 'ctiocbq' not described in 'lpfc_ct_handle_mibreq'
drivers/scsi/lpfc/lpfc_ct.c:283: warning: Excess function parameter 'ctiocb' description in 'lpfc_ct_handle_mibreq'
Link: https://lore.kernel.org/r/20210303144631.3175331-26-lee.jones@linaro.org
Cc: James Smart <james.smart@broadcom.com>
Cc: Dick Kennedy <dick.kennedy@broadcom.com>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fixes the following W=1 kernel build warning(s):
drivers/scsi/lpfc/lpfc_sli.c:9654: warning: expecting prototype for lpfc_sli_iocb2wqe(). Prototype was for lpfc_sli4_iocb2wqe() instead
drivers/scsi/lpfc/lpfc_sli.c:10439: warning: Function parameter or member 'phba' not described in 'lpfc_sli_issue_fcp_io'
drivers/scsi/lpfc/lpfc_sli.c:10439: warning: Function parameter or member 'ring_number' not described in 'lpfc_sli_issue_fcp_io'
drivers/scsi/lpfc/lpfc_sli.c:10439: warning: Function parameter or member 'piocb' not described in 'lpfc_sli_issue_fcp_io'
drivers/scsi/lpfc/lpfc_sli.c:10439: warning: Function parameter or member 'flag' not described in 'lpfc_sli_issue_fcp_io'
drivers/scsi/lpfc/lpfc_sli.c:14189: warning: expecting prototype for lpfc_sli4_sp_process_cq(). Prototype was for __lpfc_sli4_sp_process_cq() instead
drivers/scsi/lpfc/lpfc_sli.c:14754: warning: expecting prototype for lpfc_sli4_hba_process_cq(). Prototype was for lpfc_sli4_dly_hba_process_cq() instead
drivers/scsi/lpfc/lpfc_sli.c:17230: warning: expecting prototype for lpfc_sli4_free_xri(). Prototype was for __lpfc_sli4_free_xri() instead
drivers/scsi/lpfc/lpfc_sli.c:18950: warning: expecting prototype for lpfc_sli4_free_rpi(). Prototype was for __lpfc_sli4_free_rpi() instead
Link: https://lore.kernel.org/r/20210303144631.3175331-18-lee.jones@linaro.org
Cc: James Smart <james.smart@broadcom.com>
Cc: Dick Kennedy <dick.kennedy@broadcom.com>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: linux-scsi@vger.kernel.org
Cc: linux-media@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: linaro-mm-sig@lists.linaro.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
For the files modified in 2021 via the 12.8.0.7 and 12.8.0.8 patch sets,
update the copyright for 2021.
Link: https://lore.kernel.org/r/20210301171821.3427-23-jsmart2021@gmail.com
Co-developed-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Update lpfc version to 12.8.0.8.
Link: https://lore.kernel.org/r/20210301171821.3427-22-jsmart2021@gmail.com
Co-developed-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Code inspection revealed stale comments in function headers for functions
that call lpfc_prep_els_iocb(). Changes in ndlp reference counting were not
reflected in function headers.
Update the stale comments in function headers to more accurately indicate
ndlp reference counting.
Link: https://lore.kernel.org/r/20210301171821.3427-21-jsmart2021@gmail.com
Co-developed-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Lots of discovery messages are flooding the console log when testing NPIV.
Informational message for vports should have LOG_VPORT associated with it
as opposed to LOG_TRACE_EVENT.
Link: https://lore.kernel.org/r/20210301171821.3427-20-jsmart2021@gmail.com
Co-developed-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Message 8347 Invalid device found log message is logged when an LPe12000
adapter is installed. The log message is supposed to indicate an
unsupported pci reset adapter rather than an invalid device.
Change the wording to: Incapable PCI reset device.
Link: https://lore.kernel.org/r/20210301171821.3427-19-jsmart2021@gmail.com
Co-developed-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Driver is causing a crash in __lpfc_sli_release_iocbq_s4() when it
dereferences the els_wq which is NULL.
Validate the pring for the els_wq before dereferencing. Reorg the code to
move the pring assignment closer to where it is actually used.
Link: https://lore.kernel.org/r/20210301171821.3427-18-jsmart2021@gmail.com
Co-developed-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
On a setup with a dual port HBA and both ports direct connected, an rmmod
hangs momentarily when we log an Illegal State Transition. Once it resumes,
a nodelist not empty logic is hit, which forces rmmod to cleanup and exit.
We're missing a state transition case in the discovery engine.
Fix by adding a case for a DEVICE_RM event while in the unmapped state to
avoid illegal state transition log message.
Link: https://lore.kernel.org/r/20210301171821.3427-17-jsmart2021@gmail.com
Co-developed-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The debugfs nodeinfo output gets jumbled when no rpri or a defer entry is
displayed. The misalignment makes it difficult to read.
Change the format to consistently print out a 4 character rpi, and turn
defer into a suffix.
Link: https://lore.kernel.org/r/20210301171821.3427-16-jsmart2021@gmail.com
Co-developed-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
While testing target port swap test with ADISC enabled, several nodes
remain in UNUSED state. These nodes are never freed and rmmod hangs for
long time before finising with "0233 Nodelist not empty" error.
During PLOGI completion lpfc_plogi_confirm_nport() looks for existing nodes
with same WWPN. If found, the existing node is used to continue discovery.
The node on which plogi was performed is freed. When ADISC is enabled, an
ADISC els request is triggered in response to an RSCN. It's possible that
the ADISC may be rejected by the remote port causing the ADISC completion
handler to clear the port and node name in the node. If this occurs, if a
PLOGI is received it causes a node lookup based on wwpn to now fail,
causing the port swap logic to kick in which allocates a new node and swaps
to it. This effectively orphans the original node structure.
Fix the situation by detecting when the lookup fails and forgo the node
swap and node allocation by using the node on which the PLOGI was issued.
Link: https://lore.kernel.org/r/20210301171821.3427-15-jsmart2021@gmail.com
Co-developed-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The driver is seeing a scenario where PLOGI response was issued and traffic
is arriving while the adapter is still setting up the login context. This
is resulting in errors handling the traffic.
Change the driver so that PLOGI response is sent after the login context
has been setup to avoid the situation.
Link: https://lore.kernel.org/r/20210301171821.3427-14-jsmart2021@gmail.com
Co-developed-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When connected in pt2pt mode, there is a scenario where the remote port
significantly delays sending a response to our FLOGI, but acts on the FLOGI
it sent us and proceeds to PLOGI/PRLI. The FLOGI ends up timing out and
kicks off recovery logic. End result is a lot of unnecessary state changes
and lots of discovery messages being logged.
Fix by terminating the FLOGI and noop'ing its completion if we have already
accepted the remote ports FLOGI and are now processing PLOGI.
Link: https://lore.kernel.org/r/20210301171821.3427-13-jsmart2021@gmail.com
Co-developed-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
An unlikely error exit path from lpfc_els_retry() returns incorrect status
to a caller, erroneously indicating that a retry has been successfully
issued or scheduled.
Change error exit path to indicate no retry.
Link: https://lore.kernel.org/r/20210301171821.3427-12-jsmart2021@gmail.com
Co-developed-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
There are several code paths where the following sequence occurs:
- An ndlp pointer is assigned to an iocb via a nlp_get()
- An attempt is made to issue the iocb, but it fails
- The failure case does a put on the ndlp then calls lpfc_els_free_iocb()
The put may free the ndlp structure, but the els_free_iocb may reference
the now-stale ndlp pointer and cause a crash.
Fix by ensuring that the lpfc_els_free_iocb() occurs before the
lpfc_nlp_put().
While fixing, refactor the code to better ensure this calling sequence.
Link: https://lore.kernel.org/r/20210301171821.3427-11-jsmart2021@gmail.com
Co-developed-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
It is possible to call lpfc_issue_els_plogi() passing a did for which no
matching ndlp is found. A call is then made to lpfc_prep_els_iocb() with a
null pointer to a lpfc_nodelist structure resulting in a null pointer
dereference.
Fix by returning an error status if no valid ndlp is found. Fix up comments
regarding ndlp reference counting.
Link: https://lore.kernel.org/r/20210301171821.3427-10-jsmart2021@gmail.com
Fixes: 4430f7fd09 ("scsi: lpfc: Rework locations of ndlp reference taking")
Co-developed-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
lpfc_fcp_io_cmd_wqe_cmpl() is intended to mirror
lpfc_nvme_io_cmd_wqe_cmpl() for sli4 fcp completions. When the routine was
added, lpfc_fcp_io_cmd_wqe_cmpl() included a null pointer check for
phba. However, phba is definitely valid, being dereferenced by the calling
routine and used later in the routine itself.
Remove the unnecessary null check.
Link: https://lore.kernel.org/r/20210301171821.3427-9-jsmart2021@gmail.com
Fixes: 96e209be6e ("scsi: lpfc: Convert SCSI I/O completions to SLI-3 and SLI-4 handlers")
Co-developed-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
On a pt2pt setup, between 2 initiators, if one side issues a a LOGO, there
is no relogin attempt. The FC specs are grey in this area on which port
(higher wwn or not) is to re-login.
As there is no spec guidance, unconditionally re-PLOGI after the logout to
ensure a login is re-established.
Link: https://lore.kernel.org/r/20210301171821.3427-8-jsmart2021@gmail.com
Co-developed-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Driver crashed in lpfc_debugfs_disc_trc() due to null ndlp pointer. In
some calling cases, the ndlp is null and the did is looked up.
Fix by using the local did variable that is set appropriately based on ndlp
value.
Link: https://lore.kernel.org/r/20210301171821.3427-7-jsmart2021@gmail.com
Co-developed-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
After an initial successful FLOGI into the switch, if a subsequent FLOGI
fails the driver crashed accessing a node struct. On FLOGI error, the flogi
completion logic triggers the final dereference on the node structure
without checking if it is registered with a backend. The devloss logic is
triggered after node is freed leading to the access of freed node.
Fix by adjusting the error path to not take the final dereferece if there
is an outstanding transport registration. Let the transport devloss call
remove the final reference.
Link: https://lore.kernel.org/r/20210301171821.3427-6-jsmart2021@gmail.com
Co-developed-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
