Ido Schimmel says:
====================
mlxsw: Various fixes
This patch set contains various fixes for the mlxsw driver.
Patch #1 fixes an issue introduced in 5.6 in which a route in the main
table can replace an identical route in the local table despite the
local table having an higher precedence.
Patch #2 contains a test case for the bug fixed in patch #1.
Patch #3 also fixes an issue introduced in 5.6 in which the driver
failed to clear the offload indication from IPv6 nexthops upon abort.
Patch #4 fixes an issue that prevents the driver from loading on
Spectrum-3 systems. The problem and solution are explained in detail in
the commit message.
Patch #5 adds a missing error path. Discovered using smatch.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
In case devlink_dpipe_entry_ctx_prepare() failed, release RTNL that was
previously taken and free the memory allocated by
mlxsw_sp_erif_entry_prepare().
Fixes: 2ba5999f00 ("mlxsw: spectrum: Add Support for erif table entries access")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When reading the number of gearboxes from the hardware, the driver does
not validate the returned 'device type' field. The driver can therefore
wrongly assume that the queried devices are gearboxes.
On Spectrum-3 systems that support different types of devices, this can
prevent the driver from loading, as it will try to query the
temperature sensors from devices which it assumes are gearboxes and in
fact are not.
For example:
[ 218.129230] mlxsw_minimal 2-0048: Reg cmd access status failed (status=7(bad parameter))
[ 218.138282] mlxsw_minimal 2-0048: Reg cmd access failed (reg_id=900a(mtmp),type=write)
[ 218.147131] mlxsw_minimal 2-0048: Failed to setup temp sensor number 256
[ 218.534480] mlxsw_minimal 2-0048: Fail to register core bus
[ 218.540714] mlxsw_minimal: probe of 2-0048 failed with error -5
Fix this by validating the 'device type' field.
Fixes: 2e265a8b6c ("mlxsw: core: Extend hwmon interface with inter-connect temperature attributes")
Fixes: f14f4e621b ("mlxsw: core: Extend thermal core with per inter-connect device thermal zones")
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Unlike IPv4, in IPv6 there is no unique structure to represent the
nexthop and both the route and nexthop information are squashed to the
same structure ('struct fib6_info'). In order to improve resource
utilization the driver consolidates identical nexthop groups to the same
internal representation of a nexthop group.
Therefore, when the offload indication of a nexthop changes, the driver
needs to iterate over all the linked fib6_info and toggle their offload
flag accordingly.
During abort, all the routes are removed from the device and unlinked
from their nexthop group. The offload indication is cleared just before
the group is destroyed, but by that time no fib6_info is linked to the
group and the offload indication remains set.
Fix this by clearing the offload indication just before dropping the
reference from the nexthop.
Fixes: ee5a0448e7 ("mlxsw: spectrum_router: Set hardware flags for routes")
Reported-by: Alex Kushnarov <alexanderk@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Tested-by: Alex Kushnarov <alexanderk@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test that routes in the main table do not replace identical routes in
the local table and that routes in the local table do replace identical
routes in the main table.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The driver uses the same table to represent both the main and local
routing tables. Prevent routes in the main table from replacing routes
in the local table to reflect the fact that the local table is consulted
first during lookup.
Fixes: b6a1d871d3 ("mlxsw: spectrum_router: Start using new IPv4 route notifications")
Fixes: dacad7b34b ("mlxsw: spectrum_router: Start using new IPv6 route notifications")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In CONFIG_SMP=y kernels, smp_call_function_single() returns -ENXIO when
invoked for a non-existent CPU. In contrast, in CONFIG_SMP=n kernels,
a splat is emitted and smp_call_function_single() otherwise silently
ignores its "cpu" argument, instead pretending that the caller intended
to have something happen on CPU 0. Given that there is now code that
expects smp_call_function_single() to return an error if a bad CPU was
specified, this difference in semantics needs to be addressed.
Bring the semantics of the CONFIG_SMP=n version of
smp_call_function_single() into alignment with its CONFIG_SMP=y
counterpart.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20200205143409.GA7021@paulmck-ThinkPad-P72
When a system suspends, the local APIC is disabled in the suspend sequence,
but the IOAPIC is left in the current state. This means unmasked interrupt
lines stay unmasked. This is usually the case for IOAPIC pin 9 to which the
ACPI interrupt is connected.
That means that in suspended state the IOAPIC can respond to an external
interrupt, e.g. the wakeup via keyboard/RTC/ACPI, but the interrupt message
cannot be handled by the disabled local APIC. As a consequence the Remote
IRR bit is set, but the local APIC does not send an EOI to acknowledge
it. This causes the affected interrupt line to become stale and the stale
Remote IRR bit will cause a hang when __synchronize_hardirq() is invoked
for that interrupt line.
To prevent this, mask all IOAPIC entries before disabling the local
APIC. The resume code already has the unmask operation inside.
[ tglx: Massaged changelog ]
Signed-off-by: Tony W Wang-oc <TonyWWang-oc@zhaoxin.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/1579076539-7267-1-git-send-email-TonyWWang-oc@zhaoxin.com
Stop removing modes that are not supported on the system interface
when the connected PHY is capable of rate adaptation. This addresses
an issue with the LS1046ARDB board 10G interface no longer working
with an 1G link partner after autonegotiation support was added
for the Aquantia PHY on board in
commit 09c4c57f7b ("net: phy: aquantia: add support for auto-negotiation configuration")
Before this commit the values advertised by the PHY were not
influenced by the dpaa_eth driver removal of system-side unsupported
modes as the aqr_config_aneg() was basically a no-op. After this
commit, the modes removed by the dpaa_eth driver were no longer
advertised thus autonegotiation with 1G link partners failed.
Reported-by: Mian Yousaf Kaukab <ykaukab@suse.de>
Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ong Boon Leong says:
====================
net: stmmac: general fixes for Ethernet functionality
1/5: It ensures that the previous value of GMAC_VLAN_TAG register is
read first before for updating the register.
2/5: Similar to 2/6 patch but it is a fix for XGMAC_VLAN_TAG register
as requested by Jose Abreu.
3/5: It ensures the GMAC IP v4.xx and above behaves correctly to:-
ip link set <devname> multicast off|on
4/5: Added similar IFF_MULTICAST flag for xgmac2, similar to 4/6.
5/5: It ensures PCI platform data is using plat->phy_interface.
Changes from v4:-
patch 1/6 - this patch is dropped now and will take the input on
handling return value from netif_set_real_num_rx|
tx_queues() in future patch series.
v3:-
patch 1/6 - add rtnl_lock() and rtnl_unlock() for stmmac_hw_setup()
called inside stmmac_resume()
patch 3/6 - Added new patch to fix XGMAC_VLAN_TAG register writting
v2:-
patch 1/5 - added control for rtnl_lock() & rtnl_unlock() to ensure
they are used forstmmac_resume()
patch 4/5 - added IFF_MULTICAST flag check for xgmac to ensure
multicast works correctly.
v1:-
- Drop v1 patches (1/7, 3/7 & 4/7) that are not valid.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The recent patch to support passive mode converter did not take care the
phy interface configuration in PCI platform data. Hence, converting all
the PCI platform data from plat->interface to plat->phy_interface as the
default mode is meant for PHY.
Fixes: 0060c87833 ("net: stmmac: implement support for passive mode converters via dt")
Signed-off-by: Voon Weifeng <weifeng.voon@intel.com>
Tested-by: Tan, Tee Min <tee.min.tan@intel.com>
Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Without checking for IFF_MULTICAST flag, it is wrong to assume multicast
filtering is always enabled. By checking against IFF_MULTICAST, now
the driver behaves correctly when the multicast support is toggled by below
command:-
ip link set <devname> multicast off|on
Fixes: 0efedbf11f ("net: stmmac: xgmac: Fix XGMAC selftests")
Signed-off-by: Tan, Tee Min <tee.min.tan@intel.com>
Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Without checking for IFF_MULTICAST flag, it is wrong to assume multicast
filtering is always enabled. By checking against IFF_MULTICAST, now
the driver behaves correctly when the multicast support is toggled by below
command:-
ip link set <devname> multicast off|on
Fixes: 477286b53f ("stmmac: add GMAC4 core support")
Signed-off-by: Verma, Aashish <aashishx.verma@intel.com>
Tested-by: Tan, Tee Min <tee.min.tan@intel.com>
Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We should always do a read of current value of XGMAC_VLAN_TAG instead of
directly overwriting the register value.
Fixes: 3cd1cfcba2 ("net: stmmac: Implement VLAN Hash Filtering in XGMAC")
Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It should always do a read of current value of GMAC_VLAN_TAG instead of
directly overwriting the register value.
Fixes: c1be0022df ("net: stmmac: Add VLAN HASH filtering support in GMAC4+")
Signed-off-by: Tan, Tee Min <tee.min.tan@intel.com>
Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The caller of XDP_SETUP_PROG has already incremented refcnt in
__bpf_prog_get(), so drivers should only increment refcnt by
num_queues - 1.
To fix the issue, update netvsc_xdp_set() to add the correct number
to refcnt.
Hold a refcnt in netvsc_xdp_set()’s other caller, netvsc_attach().
And, do the same in netvsc_vf_setxdp(). Otherwise, every time when VF is
removed and added from the host side, the refcnt will be decreased by one,
which may cause page fault when unloading xdp program.
Fixes: 351e158139 ("hv_netvsc: Add XDP support")
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vinicius Costa Gomes says:
====================
taprio: Some fixes
Changes from v3:
- Replaced ENOTSUPP error code with EOPNOTSUPP (Jakub Kicinski);
- Added the missing policy validation for the flags netlink argument
(Jakub Kicinski);
- Fixed the destroy() flow to also destroy the priority to traffic
class mapping (David Miller);
- Fixed dropping packets when taprio offloading is used together
with ETF offloading (more on this below);
Changes from v2:
- Squashed commits 2/3 and 3/3 into a single one (I think a single
commit is going to be easier to review);
- Removed an "improvement" that was causing changes in user visible
behavior;
Changes from v1:
- Fixed ignoring the 'flags' argument when adding a new
instance (Vladimir Oltean);
- Changed the order of commits;
Updated cover letter:
One bit that might need some attention is the fix for not dropping all
packets when taprio and ETF offloading are used, patch 5/5. The
behavior when the fix is applied is that packets that have a 'txtime'
that would fall outside of their transmission window are now dropped
by taprio. The question that might be raised is: should taprio be
responsible for dropping these packets, or should it be handled lower
in the stack?
My opinion is: taprio has all the information, and it's able to give
feeback to the user. Lower in the stack, those packets might go into
the void, and the only feedback could be a hard to find counter
increasing.
Patch 1/5: Reported by Po Liu, is more of a improvement of usability for
drivers implementing offloading features, now they can rely on the
value of dev->num_tc, instead of going through some hops to get this
value.
Patch 2/5: Use 'q->flags' as the source of truth for the offloading
flags. Tries to solidify the current behavior, while avoiding going
into invalid states, one of which was causing a "rcu stall" (more
information in the commit message).
Patch 3/5: Adds the missing netlink attribute validation for
TCA_TAPRIO_ATTR_FLAGS.
Patch 4/5: Replaces the usage of netdev_set_num_tc() with
netdev_reset_tc() in taprio_destroy(), taprio_destroy() is called when
applying a configuration fails, making sure that the device traffic
class configuration goes back to the default state.
@Vladimir: If possible, I would appreciate your Ack on patch 2/5. I
have been looking at this code for so long that I might have missed
something obvious (and my growing dislike for the word 'flags' may be
affecting my judgement :-).
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
When using taprio offloading together with ETF offloading, configured
like this, for example:
$ tc qdisc replace dev $IFACE parent root handle 100 taprio \
num_tc 4 \
map 2 2 1 0 3 2 2 2 2 2 2 2 2 2 2 2 \
queues 1@0 1@1 1@2 1@3 \
base-time $BASE_TIME \
sched-entry S 01 1000000 \
sched-entry S 0e 1000000 \
flags 0x2
$ tc qdisc replace dev $IFACE parent 100:1 etf \
offload delta 300000 clockid CLOCK_TAI
During enqueue, it works out that the verification added for the
"txtime" assisted mode is run when using taprio + ETF offloading, the
only thing missing is initializing the 'next_txtime' of all the cycle
entries. (if we don't set 'next_txtime' all packets from SO_TXTIME
sockets are dropped)
Fixes: 4cfd5779bd ("taprio: Add support for txtime-assist mode")
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When destroying the current taprio instance, which can happen when the
creation of one fails, we should reset the traffic class configuration
back to the default state.
netdev_reset_tc() is a better way because in addition to setting the
number of traffic classes to zero, it also resets the priority to
traffic classes mapping to the default value.
Fixes: 5a781ccbd1 ("tc: Add support for configuring the taprio scheduler")
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
netlink policy validation for the 'flags' argument was missing.
Fixes: 4cfd5779bd ("taprio: Add support for txtime-assist mode")
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If the driver implementing taprio offloading depends on the value of
the network device number of traffic classes (dev->num_tc) for
whatever reason, it was going to receive the value zero. The value was
only set after the offloading function is called.
So, moving setting the number of traffic classes to before the
offloading function is called fixes this issue. This is safe because
this only happens when taprio is instantiated (we don't allow this
configuration to be changed without first removing taprio).
Fixes: 9c66d15646 ("taprio: Add support for hardware offloading")
Reported-by: Po Liu <po.liu@nxp.com>
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Acked-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The 7445 switch clocking profiles do not allow us to run the IMP port at
2Gb/sec in a way that it is reliable and consistent. Make sure that the
setting is only applied to the 7278 family.
Fixes: 8f1880cbe8 ("net: dsa: bcm_sf2: Configure IMP port for 2Gb/sec")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
b53_configure_vlan() is called by the bcm_sf2 driver upon setup and
indirectly through resume as well. During the initial setup, we are
guaranteed that dev->vlan_enabled is false, so there is no change in
behavior, however during suspend, we may have enabled VLANs before, so we
do want to restore that setting.
Fixes: dad8d7c645 ("net: dsa: b53: Properly account for VLAN filtering")
Fixes: 967dd82ffc ("net: dsa: b53: Add support for Broadcom RoboSwitch")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It forgot to reduce the value of the variable retry in a while loop
in the ethqos_configure() function. It may cause an endless loop and
without timeout.
Fixes: a7c30e62d4 ("net: stmmac: Add driver for Qualcomm ethqos")
Signed-off-by: Dejin Zheng <zhengdejin5@gmail.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
rxrpc_rcu_destroy_call(), which is called as an RCU callback to clean up a
put call, calls rxrpc_put_connection() which, deep in its bowels, takes a
number of spinlocks in a non-BH-safe way, including rxrpc_conn_id_lock and
local->client_conns_lock. RCU callbacks, however, are normally called from
softirq context, which can cause lockdep to notice the locking
inconsistency.
To get lockdep to detect this, it's necessary to have the connection
cleaned up on the put at the end of the last of its calls, though normally
the clean up is deferred. This can be induced, however, by starting a call
on an AF_RXRPC socket and then closing the socket without reading the
reply.
Fix this by having rxrpc_rcu_destroy_call() punt the destruction to a
workqueue if in softirq-mode and defer the destruction to process context.
Note that another way to fix this could be to add a bunch of bh-disable
annotations to the spinlocks concerned - and there might be more than just
those two - but that means spending more time with BHs disabled.
Note also that some of these places were covered by bh-disable spinlocks
belonging to the rxrpc_transport object, but these got removed without the
_bh annotation being retained on the next lock in.
Fixes: 999b69f892 ("rxrpc: Kill the client connection bundle concept")
Reported-by: syzbot+d82f3ac8d87e7ccbb2c9@syzkaller.appspotmail.com
Reported-by: syzbot+3f1fd6b8cbf8702d134e@syzkaller.appspotmail.com
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Hillf Danton <hdanton@sina.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The recent patch that substituted a flag on an rxrpc_call for the
connection pointer being NULL as an indication that a call was disconnected
puts the set_bit in the wrong place for service calls. This is only a
problem if a call is implicitly terminated by a new call coming in on the
same connection channel instead of a terminating ACK packet.
In such a case, rxrpc_input_implicit_end_call() calls
__rxrpc_disconnect_call(), which is now (incorrectly) setting the
disconnection bit, meaning that when rxrpc_release_call() is later called,
it doesn't call rxrpc_disconnect_call() and so the call isn't removed from
the peer's error distribution list and the list gets corrupted.
KASAN finds the issue as an access after release on a call, but the
position at which it occurs is confusing as it appears to be related to a
different call (the call site is where the latter call is being removed
from the error distribution list and either the next or pprev pointer
points to a previously released call).
Fix this by moving the setting of the flag from __rxrpc_disconnect_call()
to rxrpc_disconnect_call() in the same place that the connection pointer
was being cleared.
Fixes: 5273a191dc ("rxrpc: Fix NULL pointer deref due to call->conn being cleared on disconnect")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add the new file Documentation/filesystems/zonefs.txt to document
zonefs principles and user-space tool usage.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
zonefs is a very simple file system exposing each zone of a zoned block
device as a file. Unlike a regular file system with zoned block device
support (e.g. f2fs), zonefs does not hide the sequential write
constraint of zoned block devices to the user. Files representing
sequential write zones of the device must be written sequentially
starting from the end of the file (append only writes).
As such, zonefs is in essence closer to a raw block device access
interface than to a full featured POSIX file system. The goal of zonefs
is to simplify the implementation of zoned block device support in
applications by replacing raw block device file accesses with a richer
file API, avoiding relying on direct block device file ioctls which may
be more obscure to developers. One example of this approach is the
implementation of LSM (log-structured merge) tree structures (such as
used in RocksDB and LevelDB) on zoned block devices by allowing SSTables
to be stored in a zone file similarly to a regular file system rather
than as a range of sectors of a zoned device. The introduction of the
higher level construct "one file is one zone" can help reducing the
amount of changes needed in the application as well as introducing
support for different application programming languages.
Zonefs on-disk metadata is reduced to an immutable super block to
persistently store a magic number and optional feature flags and
values. On mount, zonefs uses blkdev_report_zones() to obtain the device
zone configuration and populates the mount point with a static file tree
solely based on this information. E.g. file sizes come from the device
zone type and write pointer offset managed by the device itself.
The zone files created on mount have the following characteristics.
1) Files representing zones of the same type are grouped together
under a common sub-directory:
* For conventional zones, the sub-directory "cnv" is used.
* For sequential write zones, the sub-directory "seq" is used.
These two directories are the only directories that exist in zonefs.
Users cannot create other directories and cannot rename nor delete
the "cnv" and "seq" sub-directories.
2) The name of zone files is the number of the file within the zone
type sub-directory, in order of increasing zone start sector.
3) The size of conventional zone files is fixed to the device zone size.
Conventional zone files cannot be truncated.
4) The size of sequential zone files represent the file's zone write
pointer position relative to the zone start sector. Truncating these
files is allowed only down to 0, in which case, the zone is reset to
rewind the zone write pointer position to the start of the zone, or
up to the zone size, in which case the file's zone is transitioned
to the FULL state (finish zone operation).
5) All read and write operations to files are not allowed beyond the
file zone size. Any access exceeding the zone size is failed with
the -EFBIG error.
6) Creating, deleting, renaming or modifying any attribute of files and
sub-directories is not allowed.
7) There are no restrictions on the type of read and write operations
that can be issued to conventional zone files. Buffered, direct and
mmap read & write operations are accepted. For sequential zone files,
there are no restrictions on read operations, but all write
operations must be direct IO append writes. mmap write of sequential
files is not allowed.
Several optional features of zonefs can be enabled at format time.
* Conventional zone aggregation: ranges of contiguous conventional
zones can be aggregated into a single larger file instead of the
default one file per zone.
* File ownership: The owner UID and GID of zone files is by default 0
(root) but can be changed to any valid UID/GID.
* File access permissions: the default 640 access permissions can be
changed.
The mkzonefs tool is used to format zoned block devices for use with
zonefs. This tool is available on Github at:
git@github.com:damien-lemoal/zonefs-tools.git.
zonefs-tools also includes a test suite which can be run against any
zoned block device, including null_blk block device created with zoned
mode.
Example: the following formats a 15TB host-managed SMR HDD with 256 MB
zones with the conventional zones aggregation feature enabled.
$ sudo mkzonefs -o aggr_cnv /dev/sdX
$ sudo mount -t zonefs /dev/sdX /mnt
$ ls -l /mnt/
total 0
dr-xr-xr-x 2 root root 1 Nov 25 13:23 cnv
dr-xr-xr-x 2 root root 55356 Nov 25 13:23 seq
The size of the zone files sub-directories indicate the number of files
existing for each type of zones. In this example, there is only one
conventional zone file (all conventional zones are aggregated under a
single file).
$ ls -l /mnt/cnv
total 137101312
-rw-r----- 1 root root 140391743488 Nov 25 13:23 0
This aggregated conventional zone file can be used as a regular file.
$ sudo mkfs.ext4 /mnt/cnv/0
$ sudo mount -o loop /mnt/cnv/0 /data
The "seq" sub-directory grouping files for sequential write zones has
in this example 55356 zones.
$ ls -lv /mnt/seq
total 14511243264
-rw-r----- 1 root root 0 Nov 25 13:23 0
-rw-r----- 1 root root 0 Nov 25 13:23 1
-rw-r----- 1 root root 0 Nov 25 13:23 2
...
-rw-r----- 1 root root 0 Nov 25 13:23 55354
-rw-r----- 1 root root 0 Nov 25 13:23 55355
For sequential write zone files, the file size changes as data is
appended at the end of the file, similarly to any regular file system.
$ dd if=/dev/zero of=/mnt/seq/0 bs=4K count=1 conv=notrunc oflag=direct
1+0 records in
1+0 records out
4096 bytes (4.1 kB, 4.0 KiB) copied, 0.000452219 s, 9.1 MB/s
$ ls -l /mnt/seq/0
-rw-r----- 1 root root 4096 Nov 25 13:23 /mnt/seq/0
The written file can be truncated to the zone size, preventing any
further write operation.
$ truncate -s 268435456 /mnt/seq/0
$ ls -l /mnt/seq/0
-rw-r----- 1 root root 268435456 Nov 25 13:49 /mnt/seq/0
Truncation to 0 size allows freeing the file zone storage space and
restart append-writes to the file.
$ truncate -s 0 /mnt/seq/0
$ ls -l /mnt/seq/0
-rw-r----- 1 root root 0 Nov 25 13:49 /mnt/seq/0
Since files are statically mapped to zones on the disk, the number of
blocks of a file as reported by stat() and fstat() indicates the size
of the file zone.
$ stat /mnt/seq/0
File: /mnt/seq/0
Size: 0 Blocks: 524288 IO Block: 4096 regular empty file
Device: 870h/2160d Inode: 50431 Links: 1
Access: (0640/-rw-r-----) Uid: ( 0/ root) Gid: ( 0/ root)
Access: 2019-11-25 13:23:57.048971997 +0900
Modify: 2019-11-25 13:52:25.553805765 +0900
Change: 2019-11-25 13:52:25.553805765 +0900
Birth: -
The number of blocks of the file ("Blocks") in units of 512B blocks
gives the maximum file size of 524288 * 512 B = 256 MB, corresponding
to the device zone size in this example. Of note is that the "IO block"
field always indicates the minimum IO size for writes and corresponds
to the device physical sector size.
This code contains contributions from:
* Johannes Thumshirn <jthumshirn@suse.de>,
* Darrick J. Wong <darrick.wong@oracle.com>,
* Christoph Hellwig <hch@lst.de>,
* Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> and
* Ting Yao <tingyao@hust.edu.cn>.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Don't do a single array; attach them to fsparam_enum() entry
instead. And don't bother trying to embed the names into those -
it actually loses memory, with no real speedup worth mentioning.
Simplifies validation as well.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
As it is, vfs_parse_fs_string() makes "foo" and "foo=" indistinguishable;
both get fs_value_is_string for ->type and NULL for ->string. To make
it even more unpleasant, that combination is impossible to produce with
fsconfig().
Much saner rules would be
"foo" => fs_value_is_flag, NULL
"foo=" => fs_value_is_string, ""
"foo=bar" => fs_value_is_string, "bar"
All cases are distinguishable, all results are expressable by fsconfig(),
->has_value checks are much simpler that way (to the point of the field
being useless) and quite a few regressions go away (gfs2 has no business
accepting -o nodebug=, for example).
Partially based upon patches from Miklos.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
amd-drm-next-5.6-2020-02-05:
amdgpu:
- EDC fixes for Arcturus
- GDDR6 memory training fixe
- Fix for reading gfx clockgating registers while in GFXOFF state
- i2c freq fixes
- Misc display fixes
- TLB invalidation fix when using semaphores
- VCN 2.5 instancing fixes
- Switch raven1 gfxoff to a blacklist
- Coreboot workaround for KV/KB
- Root cause dongle fixes for display and revert workaround
- Enable GPU reset for renoir and navi
- Navi overclocking fixes
- Fix up confusing warnings in display clock validation on raven
amdkfd:
- SDMA fix
radeon:
- Misc LUT fixes
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200206035458.3894-1-alexander.deucher@amd.com
Just a couple of fixes to Volta/Turing modesetting on some systems.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Ben Skeggs <skeggsb@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ <CACAvsv7=eP+Ai1ouoMyYyo1xMF0pTQki=owYjJkS=NpvKQd1fg@mail.gmail.com
These are a couple of quick fixes for regressions that were found during
the first two weeks of the merge window.
-----BEGIN PGP SIGNATURE-----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=W1SC
-----END PGP SIGNATURE-----
Merge tag 'drm/tegra/for-5.6-rc1-fixes' of git://anongit.freedesktop.org/tegra/linux into drm-next
drm/tegra: Fixes for v5.6-rc1
These are a couple of quick fixes for regressions that were found during
the first two weeks of the merge window.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thierry Reding <thierry.reding@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200206172753.2185390-1-thierry.reding@gmail.com
See MS-FSCC 2.4.43. Valid to be quried from most
Windows servers (among others).
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
SMB3.1.1 POSIX Context processing is not complete yet - so print warning
(once) if server returns it on open.
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
We didn't have a dynamic trace point for catching errors in
file_write_and_wait_range error cases in cifs_strict_fsync.
Since not all apps check for write behind errors, it can be
important for debugging to be able to trace these error
paths.
Suggested-and-reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
When mounting with -o modefromsid, the mode bits are stored in an
ACE. Directory enumeration (e.g. ls -l /mnt) triggers an SMB Query Dir
which does not include ACEs in its response. The mode bits in this
case are silently set to a default value of 755 instead.
This patch marks the dentry created during the directory enumeration
as needing re-evaluation (i.e. additional Query Info with ACEs) so
that the mode bits can be properly extracted.
Quick repro:
$ mount.cifs //win19.test/data /mnt -o ...,modefromsid
$ touch /mnt/foo && chmod 751 /mnt/foo
$ stat /mnt/foo
# reports 751 (OK)
$ sleep 2
# dentry older than 1s by default get invalidated
$ ls -l /mnt
# since dentry invalid, ls does a Query Dir
# and reports foo as 755 (WRONG)
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
CC: Stable <stable@vger.kernel.org>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGhZs6bAKwk/OTgTpSD+KveBX+j4FAl48dfgACgkQSD+KveBX
+j4c5ggAsh46tNmBzFaTIqu9U+N7KGbos73/x/mSZOjLQ41sAEau4mgxAiejgbs5
qU/edgQ19FyrKj3o1tssEXR3OgOrcPyrOU9FPnfE+Ok9AlDevvFd/bkl2fdrDYbx
LHtKBaJUMbytJWWcChCErdsq5qIzLkBrCqEpr5D2E9tNnSfvgmAmYpwylF7d8+KR
ux3+m9hyIVT7zCkFrBGgqyfrPhILV4Al6azVfJpY9TIPekzalQlcuPEMI/8OcHCy
AKOYoXwpCY4biAF35gUpRb6r5jhxiNI0Nsr7MQmaSd7vA8dlW7ENlyxNfnKB+2KT
u2OTrGSgqgZx9+WxWoPmokuyqvDJjg==
=jiJ0
-----END PGP SIGNATURE-----
Merge tag 'mlx5-fixes-2020-02-06' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
Mellanox, mlx5 fixes 2020-02-06
This series introduces some fixes to mlx5 driver.
Please pull and let me know if there is any problem.
For -stable v4.19:
('net/mlx5: IPsec, Fix esp modify function attribute')
('net/mlx5: IPsec, fix memory leak at mlx5_fpga_ipsec_delete_sa_ctx')
For -stable v5.4:
('net/mlx5: Deprecate usage of generic TLS HW capability bit')
('net/mlx5: Fix deadlock in fs_core')
For -stable v5.5:
('net/mlx5e: TX, Error completion is for last WQE in batch')
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Deprecate the generic TLS cap bit, use the new TX-specific
TLS cap bit instead.
Fixes: a12ff35e0f ("net/mlx5: Introduce TLS TX offload hardware bits and structures")
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
For a cyclic work queue, when not requesting a completion per WQE,
a single CQE might indicate the completion of several WQEs.
However, in case some WQE in the batch causes an error, then an error
completion is issued, breaking the batch, and pointing to the offending
WQE in the wqe_counter field.
Hence, WQE-specific error CQE handling (like printing, breaking, etc...)
should be performed only for the last WQE in batch.
Fixes: 130c7b46c9 ("net/mlx5e: TX, Dump WQs wqe descriptors on CQE with error events")
Fixes: fd9b4be800 ("net/mlx5e: RX, Support multiple outstanding UMR posts")
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Reviewed-by: Aya Levin <ayal@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
SA context is allocated at mlx5_fpga_ipsec_create_sa_ctx,
however the counterpart mlx5_fpga_ipsec_delete_sa_ctx function
nullifies sa_ctx pointer without freeing the memory allocated,
hence the memory leak.
Fix by free SA context when the SA is released.
Fixes: d6c4f0298c ("net/mlx5: Refactor accel IPSec code")
Signed-off-by: Raed Salem <raeds@mellanox.com>
Reviewed-by: Boris Pismenny <borisp@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
The function mlx5_fpga_esp_validate_xfrm_attrs is wrongly used
with negative negation as zero value indicates success but it
used as failure return value instead.
Fix by remove the unary not negation operator.
Fixes: 05564d0ae0 ("net/mlx5: Add flow-steering commands for FPGA IPSec implementation")
Signed-off-by: Raed Salem <raeds@mellanox.com>
Reviewed-by: Boris Pismenny <borisp@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
The server var was accidentally used as an iterator over the global
list of connections, thus overwritten the passed argument. This
resulted in the wrong signing key being returned for extra channels.
Fix this by using a separate var to iterate.
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
In gfs2_file_write_iter, for direct writes, the error checking in the buffered
write fallback case is incomplete. This can cause inode write errors to go
undetected. Fix and clean up gfs2_file_write_iter along the way.
Based on a proposed fix by Christoph Hellwig <hch@lst.de>.
Fixes: 967bcc91b0 ("gfs2: iomap direct I/O support")
Cc: stable@vger.kernel.org # v4.19+
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
