To help the users to understand the meaning of bits 31-28 of the
JTAG_ID_REG register, add a comment explaining the value that is
expected from a i.MX7ULP rev B2.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
On i.MX7ULP revision 2.2, the value is 3, so add support for this
revision, otherwise, it will use default revision of 1.0 which is
incorrect.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This is preparation to move imx_soc_device_init to drivers/soc/imx/
There is no reason to must put dt devices under /sys/devices/soc0,
they could also be under /sys/devices/platform, so we could
pass NULL as parent when calling of_platform_default_populate.
Following soc-imx8.c soc-imx-scu.c using device_initcall, need
to change return type to int type for imx_soc_device_init.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
i.MX7ULP SoC's revision info is inside the SIM module,
bit[31:28] of JTAG_ID register defines revision as below
from B0:
0001 B0
0010 B1
This patch adds SoC revision support for i.MX7ULP, test
result as below:
root@imx7ulp-evk ~$ cat /sys/devices/soc0/revision
2.1
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This patch adds cpuidle support for i.MX7ULP, 3 cpuidle
states supported as below:
1. WFI, just ARM wfi;
2. WAIT mode, mapped to SoC's partial stop mode #3;
3. STOP mode, mapped to SoC's partial stop mode #1.
In WAIT mode, system clock and bus clock will be enabled;
In STOP mode, system clock and bus clock will be disabled.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The i.MX 7ULP family of processors features NXP's advanced implementation
of the Arm Cortex-A7 core, the Arm Cortex-M4 core, as well as a 3D and 2D
Graphics Processing Units (GPUs).
This patch aims to add an initial support for imx7ulp. Note that we need
configure power mode to Partial Stop mode 3 with system/bus clock enabled
first as the default enabled STOP mode will gate off system/bus clock when
execute WFI in MX7ULP SoC.
And there's still no MXC_CPU_IMX7ULP IDs read from register as ULP has no
anatop as before. So we encode one with 0xff in reverse order in case new
ones will be in the future.
Cc: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
