Commit graph

3659 commits

Author SHA1 Message Date
Geert Uytterhoeven
5e2a4d0225 mtd: rawnand: mpc5121: Remove unused variable in ads5121_select_chip()
commit 33a0da68fb upstream.

drivers/mtd/nand/raw/mpc5121_nfc.c: In function ‘ads5121_select_chip’:
drivers/mtd/nand/raw/mpc5121_nfc.c:294:19: warning: unused variable ‘mtd’ [-Wunused-variable]
  294 |  struct mtd_info *mtd = nand_to_mtd(nand);
      |                   ^~~

Fixes: 758b56f58b ("mtd: rawnand: Pass a nand_chip object to chip->select_chip()")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20211122132138.3899138-1-geert@linux-m68k.org
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-01 17:24:40 +01:00
Doyle, Patrick
d106693dfd mtd: nand: bbt: Fix corner case in bad block table handling
commit fd0d8d85f7 upstream.

In the unlikely event that both blocks 10 and 11 are marked as bad (on a
32 bit machine), then the process of marking block 10 as bad stomps on
cached entry for block 11.  There are (of course) other examples.

Signed-off-by: Patrick Doyle <pdoyle@irobot.com>
Reviewed-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Yoshio Furuyama <ytc-mb-yfuruyama7@kioxia.com>
[<miquel.raynal@bootlin.com>: Fixed the title]
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: Frieder Schrempf <frieder.schrempf@kontron.de>
Link: https://lore.kernel.org/linux-mtd/774a92693f311e7de01e5935e720a179fb1b2468.1616635406.git.ytc-mb-yfuruyama7@kioxia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-27 09:19:55 +01:00
Stefan Riedmueller
f55dbf7298 mtd: rawnand: gpmi: Remove explicit default gpmi clock setting for i.MX6
commit aa1baa0e6c upstream.

There is no need to explicitly set the default gpmi clock rate during
boot for the i.MX 6 since this is done during nand_detect anyway.

Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
Cc: stable@vger.kernel.org
Acked-by: Han Xu <han.xu@nxp.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20211102202022.15551-1-ceggers@arri.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-27 09:19:26 +01:00
Christian Eggers
2921885387 mtd: rawnand: gpmi: Add ERR007117 protection for nfc_apply_timings
commit f53d4c109a upstream.

gpmi_io clock needs to be gated off when changing the parent/dividers of
enfc_clk_root (i.MX6Q/i.MX6UL) respectively qspi2_clk_root (i.MX6SX).
Otherwise this rate change can lead to an unresponsive GPMI core which
results in DMA timeouts and failed driver probe:

[    4.072318] gpmi-nand 112000.gpmi-nand: DMA timeout, last DMA
...
[    4.370355] gpmi-nand 112000.gpmi-nand: Chip: 0, Error -110
...
[    4.375988] gpmi-nand 112000.gpmi-nand: Chip: 0, Error -22
[    4.381524] gpmi-nand 112000.gpmi-nand: Error in ECC-based read: -22
[    4.387988] gpmi-nand 112000.gpmi-nand: Chip: 0, Error -22
[    4.393535] gpmi-nand 112000.gpmi-nand: Chip: 0, Error -22
...

Other than stated in i.MX 6 erratum ERR007117, it should be sufficient
to gate only gpmi_io because all other bch/nand clocks are derived from
different clock roots.

The i.MX6 reference manuals state that changing clock muxers can cause
glitches but are silent about changing dividers. But tests showed that
these glitches can definitely happen on i.MX6ULL. For i.MX7D/8MM in turn,
the manual guarantees that no glitches can happen when changing
dividers.

Co-developed-by: Stefan Riedmueller <s.riedmueller@phytec.de>
Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
Signed-off-by: Christian Eggers <ceggers@arri.de>
Cc: stable@vger.kernel.org
Acked-by: Han Xu <han.xu@nxp.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20211102202022.15551-2-ceggers@arri.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-27 09:19:26 +01:00
Herve Codina
b78a27fa58 mtd: rawnand: fsmc: Fix timing computation
commit 9472335eaa upstream.

Under certain circumstances, the timing settings calculated by
the FSMC NAND controller driver were inaccurate.
These settings led to incorrect data reads or fallback to
timing mode 0 depending on the NAND chip used.

The timing computation did not take into account the following
constraint given in SPEAr3xx reference manual:
  twait >= tCEA - (tset * TCLK) + TOUTDEL + TINDEL

Enhance the timings calculation by taking into account this
additional constraint.

This change has no impact on slow timing modes such as mode 0.
Indeed, on mode 0, computed values are the same with and
without the patch.

NANDs which previously stayed in mode 0 because of fallback to
mode 0 can now work at higher speeds and NANDs which were not
working at all because of the corrupted data work at high
speeds without troubles.

Overall improvement on a Micron/MT29F1G08 (flash_speed tool):
                        mode0       mode3
eraseblock write speed  3220 KiB/s  4511 KiB/s
eraseblock read speed   4491 KiB/s  7529 KiB/s

Fixes: d9fb079571 ("mtd: nand: fsmc: add support for SDR timings")
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20211119150316.43080-5-herve.codina@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-14 14:49:03 +01:00
Herve Codina
7596d0deec mtd: rawnand: fsmc: Take instruction delay into account
commit a4ca0c439f upstream.

The FSMC NAND controller should apply a delay after the
instruction has been issued on the bus.
The FSMC NAND controller driver did not handle this delay.

Add this waiting delay in the FSMC NAND controller driver.

Fixes: 4da712e702 ("mtd: nand: fsmc: use ->exec_op()")
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20211119150316.43080-4-herve.codina@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-14 14:49:03 +01:00
Christophe JAILLET
9b63c27d6b mtd: rawnand: cafe: Fix a resource leak in the error handling path of 'cafe_nand_probe()'
[ Upstream commit 6b430c7595 ]

A successful 'init_rs_non_canonical()' call should be balanced by a
corresponding 'free_rs()' call in the error handling path of the probe, as
already done in the remove function.

Update the error handling path accordingly.

Fixes: 8c61b7a7f4 ("[MTD] [NAND] Use rslib for CAFÉ ECC")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/fd313d3fb787458bcc73189e349f481133a2cdc9.1629532640.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-22 12:26:45 +02:00
Yang Yingliang
35a4e0aee8 mtd: rawnand: marvell: add missing clk_disable_unprepare() on error in marvell_nfc_resume()
[ Upstream commit ae94c49527 ]

Add clk_disable_unprepare() on error path in marvell_nfc_resume().

Fixes: bd9c3f9b3c ("mtd: rawnand: marvell: add suspend and resume hooks")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20210601125814.3260364-1-yangyingliang@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-14 16:53:45 +02:00
Lv Yunlong
ef8e7bfea9 mtd: rawnand: gpmi: Fix a double free in gpmi_nand_init
[ Upstream commit 076de75de1 ]

If the callee gpmi_alloc_dma_buffer() failed to alloc memory for
this->raw_buffer, gpmi_free_dma_buffer() will be called to free
this->auxiliary_virt. But this->auxiliary_virt is still a non-NULL
and valid ptr.

Then gpmi_alloc_dma_buffer() returns err and gpmi_free_dma_buffer()
is called again to free this->auxiliary_virt in err_out. This causes
a double free.

As gpmi_free_dma_buffer() has already called in gpmi_alloc_dma_buffer's
error path, so it should return err directly instead of releasing the dma
buffer again.

Fixes: 4d02423e9a ("mtd: nand: gpmi: Fix gpmi_nand_init() error path")
Signed-off-by: Lv Yunlong <lyl2019@mail.ustc.edu.cn>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20210403060905.5251-1-lyl2019@mail.ustc.edu.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-14 09:44:20 +02:00
Manivannan Sadhasivam
168877a575 mtd: rawnand: qcom: Return actual error code instead of -ENODEV
[ Upstream commit 55fbb9ba4f ]

In qcom_probe_nand_devices() function, the error code returned by
qcom_nand_host_init_and_register() is converted to -ENODEV in the case
of failure. This poses issue if -EPROBE_DEFER is returned when the
dependency is not available for a component like parser.

So let's restructure the error handling logic a bit and return the
actual error code in case of qcom_nand_host_init_and_register() failure.

Fixes: c76b78d8ec ("mtd: nand: Qualcomm NAND controller driver")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-14 09:44:17 +02:00
Álvaro Fernández Rojas
e5b3e69eb3 mtd: rawnand: brcmnand: fix OOB R/W with Hamming ECC
[ Upstream commit f5200c1424 ]

Hamming ECC doesn't cover the OOB data, so reading or writing OOB shall
always be done without ECC enabled.
This is a problem when adding JFFS2 cleanmarkers to erased blocks. If JFFS2
clenmarkers are added to the OOB with ECC enabled, OOB bytes will be changed
from ff ff ff to 00 00 00, reporting incorrect ECC errors.

Fixes: 27c5b17cd1 ("mtd: nand: add NAND driver "library" for Broadcom STB NAND controller")
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Acked-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20210224080210.23686-1-noltari@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-14 09:44:17 +02:00
Dan Carpenter
9e612890bb mtd: rawnand: fsmc: Fix error code in fsmc_nand_probe()
[ Upstream commit e7a97528e3 ]

If dma_request_channel() fails then the probe fails and it should
return a negative error code, but currently it returns success.

fixes: 4774fb0a48 ("mtd: nand/fsmc: Add DMA support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/YCqaOZ83OvPOzLwh@mwanda
Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-14 09:44:17 +02:00
Kai Stuhlemmer (ebee Engineering)
49fc21a47e mtd: rawnand: atmel: Update ecc_stats.corrected counter
commit 33cebf701e upstream.

Update MTD ECC statistics with the number of corrected bits.

Fixes: f88fc122cc ("mtd: nand: Cleanup/rework the atmel_nand driver")
Cc: stable@vger.kernel.org
Signed-off-by: Kai Stuhlemmer (ebee Engineering) <kai.stuhlemmer@ebee.de>
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20210322150714.101585-1-tudor.ambarus@microchip.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-11 14:04:02 +02:00
Alexander Lobakin
3ef6813bb3 mtd: spinand: core: add missing MODULE_DEVICE_TABLE()
commit 25fefc88c7 upstream.

The module misses MODULE_DEVICE_TABLE() for both SPI and OF ID tables
and thus never autoloads on ID matches.
Add the missing declarations.
Present since day-0 of spinand framework introduction.

Fixes: 7529df4652 ("mtd: nand: Add core infrastructure to support SPI NANDs")
Cc: stable@vger.kernel.org # 4.19+
Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20210323173714.317884-1-alobakin@pm.me
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-11 14:04:02 +02:00
Felix Fietkau
4d3ba541be Revert "mtd: spinand: Fix OOB read"
This reverts stable commit baad618d07.

This commit is adding lines to spinand_write_to_cache_op, wheras the upstream
commit 868cbe2a6d that this was supposed to
backport was touching spinand_read_from_cache_op.
It causes a crash on writing OOB data by attempting to write to read-only
kernel memory.

Cc: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-09 13:44:54 +01:00
Sergei Antonov
1b26af7e4c mtd: rawnand: meson: fix meson_nfc_dma_buffer_release() arguments
commit c13d845e9a upstream.

Arguments 'infolen' and 'datalen' to meson_nfc_dma_buffer_release() were mixed up.

Fixes: 8fae856c53 ("mtd: rawnand: meson: add support for Amlogic NAND flash controller")
Cc: stable@vger.kernel.org
Signed-off-by: Sergei Antonov <saproj@gmail.com>
Acked-by: Liang Yang <liang.yang@amlogic.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20201028094940.11765-1-saproj@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-30 11:51:43 +01:00
Praveenkumar I
c5f3e5ca81 mtd: rawnand: qcom: Fix DMA sync on FLASH_STATUS register read
commit bc36860211 upstream.

After each codeword NAND_FLASH_STATUS is read for possible operational
failures. But there is no DMA sync for CPU operation before reading it
and this leads to incorrect or older copy of DMA buffer in reg_read_buf.

This patch adds the DMA sync on reg_read_buf for CPU before reading it.

Fixes: 5bc36b2bf6 ("mtd: rawnand: qcom: check for operation errors in case of raw read")
Cc: stable@vger.kernel.org
Signed-off-by: Praveenkumar I <ipkumar@codeaurora.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/1602230872-25616-1-git-send-email-ipkumar@codeaurora.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-30 11:51:43 +01:00
Miquel Raynal
4290a73c9d mtd: spinand: Fix OOB read
commit 868cbe2a6d upstream.

So far OOB have never been used in SPI-NAND, add the missing memcpy to
make it work properly.

Fixes: 7529df4652 ("mtd: nand: Add core infrastructure to support SPI NANDs")
Cc: stable@vger.kernel.org
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20201001102014.20100-6-miquel.raynal@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-30 11:51:43 +01:00
Han Xu
a4fd2da3e8 mtd: rawnand: gpmi: Fix the random DMA timeout issue
[ Upstream commit 7671edeb19 ]

To get better performance, current gpmi driver collected and chained all
small DMA transfers in gpmi_nfc_exec_op, the whole chain triggered and
wait for complete at the end.

But some random DMA timeout found in this new driver, with the help of
ftrace, we found the root cause is as follows:

Take gpmi_ecc_read_page() as an example, gpmi_nfc_exec_op collected 6
DMA transfers and the DMA chain triggered at the end. It waits for bch
completion and check jiffies if it's timeout. The typical function graph
shown below,

   63.216351 |   1)               |  gpmi_ecc_read_page() {
   63.216352 |   1)   0.750 us    |    gpmi_bch_layout_std();
   63.216354 |   1)               |    gpmi_nfc_exec_op() {
   63.216355 |   1)               |      gpmi_chain_command() {
   63.216356 |   1)               |        mxs_dma_prep_slave_sg() {
   63.216357 |   1)               |          /* mxs chan ccw idx: 0 */
   63.216358 |   1)   1.750 us    |        }
   63.216359 |   1)               |        mxs_dma_prep_slave_sg() {
   63.216360 |   1)               |          /* mxs chan ccw idx: 1 */
   63.216361 |   1)   2.000 us    |        }
   63.216361 |   1)   6.500 us    |      }
   63.216362 |   1)               |      gpmi_chain_command() {
   63.216363 |   1)               |        mxs_dma_prep_slave_sg() {
   63.216364 |   1)               |          /* mxs chan ccw idx: 2 */
   63.216365 |   1)   1.750 us    |        }
   63.216366 |   1)               |        mxs_dma_prep_slave_sg() {
   63.216367 |   1)               |          /* mxs chan ccw idx: 3 */
   63.216367 |   1)   1.750 us    |        }
   63.216368 |   1)   5.875 us    |      }
   63.216369 |   1)               |      /* gpmi_chain_wait_ready */
   63.216370 |   1)               |      mxs_dma_prep_slave_sg() {
   63.216372 |   1)               |        /* mxs chan ccw idx: 4 */
   63.216373 |   1)   3.000 us    |      }
   63.216374 |   1)               |      /* gpmi_chain_data_read */
   63.216376 |   1)               |      mxs_dma_prep_slave_sg() {
   63.216377 |   1)               |        /* mxs chan ccw idx: 5 */
   63.216378 |   1)   2.000 us    |      }
   63.216379 |   1)   1.125 us    |      mxs_dma_tx_submit();
   63.216381 |   1)   1.000 us    |      mxs_dma_enable_chan();
   63.216712 |   0)   2.625 us    |  mxs_dma_int_handler();
   63.216717 |   0)   4.250 us    |  bch_irq();
   63.216723 |   0)   1.250 us    |  mxs_dma_tasklet();
   63.216723 |   1)               |      /* jiffies left 250 */
   63.216725 |   1) ! 372.000 us  |    }
   63.216726 |   1)   2.625 us    |    gpmi_count_bitflips();
   63.216730 |   1) ! 379.125 us  |  }

but it's not gurantee that bch irq handled always after dma irq handled,
sometimes bch_irq comes first and gpmi_nfc_exec_op won't wait anymore,
another gpmi_nfc_exec_op may get invoked before last DMA chain IRQ
handled, this messed up the next DMA chain and causes DMA timeout. Check
the trace log when issue happened.

   63.218923 |   1)               |  gpmi_ecc_read_page() {
   63.218924 |   1)   0.625 us    |    gpmi_bch_layout_std();
   63.218926 |   1)               |    gpmi_nfc_exec_op() {
   63.218927 |   1)               |      gpmi_chain_command() {
   63.218928 |   1)               |        mxs_dma_prep_slave_sg() {
   63.218929 |   1)               |          /* mxs chan ccw idx: 0 */
   63.218929 |   1)   1.625 us    |        }
   63.218931 |   1)               |        mxs_dma_prep_slave_sg() {
   63.218931 |   1)               |          /* mxs chan ccw idx: 1 */
   63.218932 |   1)   1.750 us    |        }
   63.218933 |   1)   5.875 us    |      }
   63.218934 |   1)               |      gpmi_chain_command() {
   63.218934 |   1)               |        mxs_dma_prep_slave_sg() {
   63.218935 |   1)               |          /* mxs chan ccw idx: 2 */
   63.218936 |   1)   1.875 us    |        }
   63.218937 |   1)               |        mxs_dma_prep_slave_sg() {
   63.218938 |   1)               |          /* mxs chan ccw idx: 3 */
   63.218939 |   1)   1.625 us    |        }
   63.218939 |   1)   5.875 us    |      }
   63.218940 |   1)               |      /* gpmi_chain_wait_ready */
   63.218941 |   1)               |      mxs_dma_prep_slave_sg() {
   63.218942 |   1)               |        /* mxs chan ccw idx: 4 */
   63.218942 |   1)   1.625 us    |      }
   63.218943 |   1)               |      /* gpmi_chain_data_read */
   63.218944 |   1)               |      mxs_dma_prep_slave_sg() {
   63.218945 |   1)               |        /* mxs chan ccw idx: 5 */
   63.218947 |   1)   2.375 us    |      }
   63.218948 |   1)   0.625 us    |      mxs_dma_tx_submit();
   63.218949 |   1)   1.000 us    |      mxs_dma_enable_chan();
   63.219276 |   0)   5.125 us    |  bch_irq();                  <----
   63.219283 |   1)               |      /* jiffies left 250 */
   63.219285 |   1) ! 358.625 us  |    }
   63.219286 |   1)   2.750 us    |    gpmi_count_bitflips();
   63.219289 |   1) ! 366.000 us  |  }
   63.219290 |   1)               |  gpmi_ecc_read_page() {
   63.219291 |   1)   0.750 us    |    gpmi_bch_layout_std();
   63.219293 |   1)               |    gpmi_nfc_exec_op() {
   63.219294 |   1)               |      gpmi_chain_command() {
   63.219295 |   1)               |        mxs_dma_prep_slave_sg() {
   63.219295 |   0)   1.875 us    |  mxs_dma_int_handler();      <----
   63.219296 |   1)               |          /* mxs chan ccw idx: 6 */
   63.219297 |   1)   2.250 us    |        }
   63.219298 |   1)               |        mxs_dma_prep_slave_sg() {
   63.219298 |   0)   1.000 us    |  mxs_dma_tasklet();
   63.219299 |   1)               |          /* mxs chan ccw idx: 0 */
   63.219300 |   1)   1.625 us    |        }
   63.219300 |   1)   6.375 us    |      }
   63.219301 |   1)               |      gpmi_chain_command() {
   63.219302 |   1)               |        mxs_dma_prep_slave_sg() {
   63.219303 |   1)               |          /* mxs chan ccw idx: 1 */
   63.219304 |   1)   1.625 us    |        }
   63.219305 |   1)               |        mxs_dma_prep_slave_sg() {
   63.219306 |   1)               |          /* mxs chan ccw idx: 2 */
   63.219306 |   1)   1.875 us    |        }
   63.219307 |   1)   6.000 us    |      }
   63.219308 |   1)               |      /* gpmi_chain_wait_ready */
   63.219308 |   1)               |      mxs_dma_prep_slave_sg() {
   63.219309 |   1)               |        /* mxs chan ccw idx: 3 */
   63.219310 |   1)   2.000 us    |      }
   63.219311 |   1)               |      /* gpmi_chain_data_read */
   63.219312 |   1)               |      mxs_dma_prep_slave_sg() {
   63.219313 |   1)               |        /* mxs chan ccw idx: 4 */
   63.219314 |   1)   1.750 us    |      }
   63.219315 |   1)   0.625 us    |      mxs_dma_tx_submit();
   63.219316 |   1)   0.875 us    |      mxs_dma_enable_chan();
   64.224227 |   1)               |      /* jiffies left 0 */

In the first gpmi_nfc_exec_op, bch_irq comes first and gpmi_nfc_exec_op
exits, but DMA IRQ still not happened yet until the middle of following
gpmi_nfc_exec_op, the first DMA transfer index get messed and DMA get
timeout.

To fix the issue, when there is bch ops in DMA chain, the
gpmi_nfc_exec_op should wait for both completions rather than bch
completion only.

Fixes: ef347c0cfd ("mtd: rawnand: gpmi: Implement exec_op")
Signed-off-by: Han Xu <han.xu@nxp.com>
Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20201209035104.22679-3-han.xu@nxp.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-30 11:51:24 +01:00
Dan Carpenter
86f6e53642 mtd: rawnand: meson: Fix a resource leak in init
[ Upstream commit ad8566d355 ]

Call clk_disable_unprepare(nfc->phase_rx) if the clk_set_rate() function
fails to avoid a resource leak.

Fixes: 8fae856c53 ("mtd: rawnand: meson: add support for Amlogic NAND flash controller")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/X8ikVCnUsfTpffFB@mwanda
Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-30 11:51:24 +01:00
Zhang Qilong
5e8715b238 mtd: rawnand: gpmi: fix reference count leak in gpmi ops
[ Upstream commit 1b391c7f2e ]

pm_runtime_get_sync() will increment pm usage at first and it
will resume the device later. If runtime of the device has
error or device is in inaccessible state(or other error state),
resume operation will fail. If we do not call put operation to
decrease the reference, it will result in reference leak in
the two functions(gpmi_init and gpmi_nfc_exec_op). Moreover,
this device cannot enter the idle state and always stay busy or
other non-idle state later. So we fixed it through adding
pm_runtime_put_noidle.

Fixes: 5bc6bb603b ("mtd: rawnand: gpmi: Fix suspend/resume problem")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Acked-by: Han Xu <han.xu@nxp.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20201107110552.1568742-1-zhangqilong3@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-30 11:51:24 +01:00
Hauke Mehrtens
626e2200f8 mtd: spinand: gigadevice: Add QE Bit
[ Upstream commit aea7687e77 ]

The following GigaDevice chips have the QE BIT in the feature flags, I
checked the datasheets, but did not try this.
* GD5F1GQ4xExxG
* GD5F1GQ4xFxxG
* GD5F1GQ4UAYIG
* GD5F4GQ4UAYIG

The Quad operations like 0xEB mention that the QE bit has to be set.

Fixes: c93c613214 ("mtd: spinand: add support for GigaDevice GD5FxGQ4xA")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Tested-by: Chuanhong Guo <gch981213@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20200820165121.3192-3-hauke@hauke-m.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-29 09:57:51 +01:00
Hauke Mehrtens
8999f59944 mtd: spinand: gigadevice: Only one dummy byte in QUADIO
[ Upstream commit 6387ad9caf ]

The datasheet only lists one dummy byte in the 0xEH operation for the
following chips:
* GD5F1GQ4xExxG
* GD5F1GQ4xFxxG
* GD5F1GQ4UAYIG
* GD5F4GQ4UAYIG

Fixes: c93c613214 ("mtd: spinand: add support for GigaDevice GD5FxGQ4xA")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Tested-by: Chuanhong Guo <gch981213@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20200820165121.3192-2-hauke@hauke-m.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-29 09:57:50 +01:00
Evgeny Novikov
2bb74bc921 mtd: rawnand: vf610: disable clk on error handling path in probe
[ Upstream commit cb7dc3178a ]

vf610_nfc_probe() does not invoke clk_disable_unprepare() on one error
handling path. The patch fixes that.

Found by Linux Driver Verification project (linuxtesting.org).

Fixes: 6f0ce4dfc5 ("mtd: rawnand: vf610: Avoid a potential NULL pointer dereference")
Signed-off-by: Evgeny Novikov <novikov@ispras.ru>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20200806072634.23528-1-novikov@ispras.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-29 09:57:50 +01:00
Dinghao Liu
5cddba546a mtd: rawnand: omap_elm: Fix runtime PM imbalance on error
[ Upstream commit 37f7212148 ]

pm_runtime_get_sync() increments the runtime PM usage counter even
when it returns an error code. Thus a pairing decrement is needed on
the error handling path to keep the counter balanced.

Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20200522104008.28340-1-dinghao.liu@zju.edu.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-01 13:18:07 +02:00
Dinghao Liu
63f600d87b mtd: rawnand: gpmi: Fix runtime PM imbalance on error
[ Upstream commit 550e68ea36 ]

pm_runtime_get_sync() increments the runtime PM usage counter even
when it returns an error code. Thus a pairing decrement is needed on
the error handling path to keep the counter balanced.

Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20200522095139.19653-1-dinghao.liu@zju.edu.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-01 13:18:07 +02:00
Boris Brezillon
617da16f5a mtd: rawnand: fsl_upm: Remove unused mtd var
[ Upstream commit ccc49eff77 ]

The mtd var in fun_wait_rnb() is now unused, let's get rid of it and
fix the warning resulting from this unused var.

Fixes: 50a487e771 ("mtd: rawnand: Pass a nand_chip object to chip->dev_ready()")
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20200603134922.1352340-2-boris.brezillon@collabora.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-21 13:05:30 +02:00
Sivaprakash Murugesan
a8e9efb553 mtd: rawnand: qcom: avoid write to unavailable register
commit 443440cc4a upstream.

SFLASHC_BURST_CFG is only available on older ipq NAND platforms, this
register has been removed when the NAND controller got implemented in
the qpic controller.

Avoid writing this register on devices which are based on qpic NAND
controller.

Fixes: dce84760b0 ("mtd: nand: qcom: Support for IPQ8074 QPIC NAND controller")
Cc: stable@vger.kernel.org
Signed-off-by: Sivaprakash Murugesan <sivaprak@codeaurora.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/1591948696-16015-2-git-send-email-sivaprak@codeaurora.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-08-19 08:16:25 +02:00
Miquel Raynal
cc490ea23f mtd: rawnand: oxnas: Release all devices in the _remove() path
commit 0a5f45e57e upstream.

oxnans_nand_remove() should release all MTD devices and clean all NAND
devices, not only the first one registered.

Fixes: 6685924924 ("mtd: nand: Add OX820 NAND Support")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20200519130035.1883-39-miquel.raynal@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-22 09:33:07 +02:00
Miquel Raynal
f8a2658d0f mtd: rawnand: oxnas: Unregister all devices on error
commit b60391eb17 upstream.

On error, the oxnas probe path just frees the device which failed and
aborts the probe, leaving unreleased resources.

Fix this situation by calling mtd_device_unregister()/nand_cleanup()
on these.

Fixes: 6685924924 ("mtd: nand: Add OX820 NAND Support")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20200519130035.1883-38-miquel.raynal@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-22 09:33:07 +02:00
Miquel Raynal
4682749ce3 mtd: rawnand: oxnas: Keep track of registered devices
commit 383fc3f613 upstream.

All initialized and registered devices should be listed somewhere so
that we can unregister/free them in the _remove() path.

This patch is not a fix per-se but is needed to apply three other
fixes coming right after, explaining the Fixes/Cc: stable tags.

Fixes: 6685924924 ("mtd: nand: Add OX820 NAND Support")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20200519130035.1883-36-miquel.raynal@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-22 09:33:07 +02:00
Álvaro Fernández Rojas
8463054e3d mtd: rawnand: brcmnand: fix CS0 layout
commit 3d3fb3c5be upstream.

Only v3.3-v5.0 have a different CS0 layout.
Controllers before v3.3 use the same layout for every CS.

Fixes: 27c5b17cd1 ("mtd: nand: add NAND driver "library" for Broadcom STB NAND controller")
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20200522121524.4161539-3-noltari@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-22 09:33:07 +02:00
Álvaro Fernández Rojas
ee73c81e38 mtd: rawnand: brcmnand: correctly verify erased pages
commit dcb351c03f upstream.

The current code checks that the whole OOB area is erased.
This is a problem when JFFS2 cleanmarkers are added to the OOB, since it will
fail due to the usable OOB bytes not being 0xff.
Correct this by only checking that data and ECC bytes aren't 0xff.

Fixes: 02b88eea9f ("mtd: brcmnand: Add check for erased page bitflips")
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20200512082451.771212-1-noltari@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-22 09:33:07 +02:00
Miquel Raynal
e9f5e16f32 mtd: rawnand: timings: Fix default tR_max and tCCS_min timings
commit 4d8ec041d9 upstream.

tR and tCCS are currently wrongly expressed in femtoseconds, while we
expect these values to be expressed in picoseconds. Set right
hardcoded values.

Fixes: 6a943386ee mtd: rawnand: add default values for dynamic timings
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://lore.kernel.org/linux-mtd/20200428094302.14624-3-miquel.raynal@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-22 09:33:06 +02:00
Miquel Raynal
f1ad0fc9de mtd: rawnand: marvell: Fix probe error path
commit c525b7af96 upstream.

Ensure all chips are deregistered and cleaned in case of error during
the probe.

Fixes: 02f26ecf8c ("mtd: nand: add reworked Marvell NAND controller driver")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://lore.kernel.org/linux-mtd/20200424164501.26719-5-miquel.raynal@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-22 09:33:06 +02:00
Miquel Raynal
be953ad71c mtd: rawnand: marvell: Use nand_cleanup() when the device is not yet registered
commit 7a0c18fb5c upstream.

Do not call nand_release() while the MTD device has not been
registered, use nand_cleanup() instead.

Fixes: 02f26ecf8c ("mtd: nand: add reworked Marvell NAND controller driver")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://lore.kernel.org/linux-mtd/20200424164501.26719-4-miquel.raynal@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-22 09:33:06 +02:00
Miquel Raynal
5f59ce425f mtd: rawnand: marvell: Fix the condition on a return code
commit c27075772d upstream.

In a previous fix, I changed the condition on which the timeout of an
IRQ is reached from:

    if (!ret)

into:

    if (ret && !pending)

While having a non-zero return code is usual in the Linux kernel, here
ret comes from a wait_for_completion_timeout() which returns 0 when
the waiting period is too long.

Hence, the revised condition should be:

    if (!ret && !pending)

The faulty patch did not produce any error because of the !pending
condition so this change is finally purely cosmetic and does not
change the actual driver behavior.

Fixes: cafb56dd74 ("mtd: rawnand: marvell: prevent timeouts on a loaded machine")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://lore.kernel.org/linux-mtd/20200424164501.26719-2-miquel.raynal@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-22 09:33:06 +02:00
Miquel Raynal
2140d7d5d8 mtd: rawnand: tmio: Fix the probe error path
commit 75e9a330a9 upstream.

nand_release() is supposed be called after MTD device registration.
Here, only nand_scan() happened, so use nand_cleanup() instead.

There is no real Fixes tag applying here as the use of nand_release()
in this driver predates by far the introduction of nand_cleanup() in
commit d44154f969 ("mtd: nand: Provide nand_cleanup() function to free NAND related resources")
which makes this change possible. However, pointing this commit as the
culprit for backporting purposes makes sense even if this commit is not
introducing any bug.

Fixes: d44154f969 ("mtd: nand: Provide nand_cleanup() function to free NAND related resources")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/linux-mtd/20200519130035.1883-57-miquel.raynal@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-22 09:31:26 +02:00
Miquel Raynal
ec851b26a3 mtd: rawnand: mtk: Fix the probe error path
commit 8a82bbcade upstream.

nand_release() is supposed be called after MTD device registration.
Here, only nand_scan() happened, so use nand_cleanup() instead.

There is no real Fixes tag applying here as the use of nand_release()
in this driver predates the introduction of nand_cleanup() in
commit d44154f969 ("mtd: nand: Provide nand_cleanup() function to free NAND related resources")
which makes this change possible. However, pointing this commit as the
culprit for backporting purposes makes sense even if this commit is not
introducing any bug.

Fixes: d44154f969 ("mtd: nand: Provide nand_cleanup() function to free NAND related resources")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/linux-mtd/20200519130035.1883-28-miquel.raynal@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-22 09:31:26 +02:00
Miquel Raynal
b5404756b5 mtd: rawnand: pasemi: Fix the probe error path
commit f51466901c upstream.

nand_cleanup() is supposed to be called on error after a successful
call to nand_scan() to free all NAND resources.

There is no real Fixes tag applying here as the use of nand_release()
in this driver predates by far the introduction of nand_cleanup() in
commit d44154f969 ("mtd: nand: Provide nand_cleanup() function to free NAND related resources")
which makes this change possible, hence pointing it as the commit to
fix for backporting purposes, even if this commit is not introducing
any bug.

Fixes: d44154f969 ("mtd: nand: Provide nand_cleanup() function to free NAND related resources")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/linux-mtd/20200519130035.1883-41-miquel.raynal@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-22 09:31:26 +02:00
Miquel Raynal
44a9bf52ef mtd: rawnand: plat_nand: Fix the probe error path
commit 5284024b4d upstream.

nand_release() is supposed be called after MTD device registration.
Here, only nand_scan() happened, so use nand_cleanup() instead.

There is no real Fixes tag applying here as the use of nand_release()
in this driver predates by far the introduction of nand_cleanup() in
commit d44154f969 ("mtd: nand: Provide nand_cleanup() function to free NAND related resources")
which makes this change possible, hence pointing it as the commit to
fix for backporting purposes, even if this commit is not introducing
any bug.

Fixes: d44154f969 ("mtd: nand: Provide nand_cleanup() function to free NAND related resources")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/linux-mtd/20200519130035.1883-43-miquel.raynal@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-22 09:31:26 +02:00
Miquel Raynal
ab702f81e9 mtd: rawnand: sunxi: Fix the probe error path
commit 3d84515ffd upstream.

nand_release() is supposed be called after MTD device registration.
Here, only nand_scan() happened, so use nand_cleanup() instead.

Fixes: 1fef62c142 ("mtd: nand: add sunxi NAND flash controller support")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/linux-mtd/20200519130035.1883-54-miquel.raynal@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-22 09:31:26 +02:00
Miquel Raynal
2d77d5575e mtd: rawnand: oxnas: Fix the probe error path
commit 154298e2a3 upstream.

nand_release() is supposed be called after MTD device registration.
Here, only nand_scan() happened, so use nand_cleanup() instead.

While at it, be consistent and move the function call in the error
path thanks to a goto statement.

Fixes: 6685924924 ("mtd: nand: Add OX820 NAND Support")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/linux-mtd/20200519130035.1883-37-miquel.raynal@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-22 09:31:25 +02:00
Miquel Raynal
2d6b0901b8 mtd: rawnand: socrates: Fix the probe error path
commit 9c6c2e5cc7 upstream.

nand_release() is supposed be called after MTD device registration.
Here, only nand_scan() happened, so use nand_cleanup() instead.

There is no real Fixes tag applying here as the use of nand_release()
in this driver predates by far the introduction of nand_cleanup() in
commit d44154f969 ("mtd: nand: Provide nand_cleanup() function to free NAND related resources")
which makes this change possible. However, pointing this commit as the
culprit for backporting purposes makes sense even if this commit is not
introducing any bug.

Fixes: d44154f969 ("mtd: nand: Provide nand_cleanup() function to free NAND related resources")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/linux-mtd/20200519130035.1883-51-miquel.raynal@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-22 09:31:25 +02:00
Miquel Raynal
3a54e24287 mtd: rawnand: orion: Fix the probe error path
commit be238fbf78 upstream.

nand_release() is supposed be called after MTD device registration.
Here, only nand_scan() happened, so use nand_cleanup() instead.

There is no real Fixes tag applying here as the use of nand_release()
in this driver predates by far the introduction of nand_cleanup() in
commit d44154f969 ("mtd: nand: Provide nand_cleanup() function to free NAND related resources")
which makes this change possible. However, pointing this commit as the
culprit for backporting purposes makes sense even if this commit is not
introducing any bug.

Fixes: d44154f969 ("mtd: nand: Provide nand_cleanup() function to free NAND related resources")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/linux-mtd/20200519130035.1883-34-miquel.raynal@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-22 09:31:25 +02:00
Miquel Raynal
0b19623af5 mtd: rawnand: xway: Fix the probe error path
commit 34531be5e8 upstream.

nand_release() is supposed be called after MTD device registration.
Here, only nand_scan() happened, so use nand_cleanup() instead.

There is no real Fixes tag applying here as the use of nand_release()
in this driver predates the introduction of nand_cleanup() in
commit d44154f969 ("mtd: nand: Provide nand_cleanup() function to free NAND related resources")
which makes this change possible. However, pointing this commit as the
culprit for backporting purposes makes sense even if this commit is not
introducing any bug.

Fixes: d44154f969 ("mtd: nand: Provide nand_cleanup() function to free NAND related resources")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/linux-mtd/20200519130035.1883-61-miquel.raynal@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-22 09:31:25 +02:00
Miquel Raynal
ae7cf595e1 mtd: rawnand: ingenic: Fix the probe error path
commit de17cade0e upstream.

nand_release() is supposed be called after MTD device registration.
Here, only nand_scan() happened, so use nand_cleanup() instead.

There is no real Fixes tag applying here as the use of nand_release()
in this driver predates the introduction of nand_cleanup() in
commit d44154f969 ("mtd: nand: Provide nand_cleanup() function to free NAND related resources")
which makes this change possible. Hence, pointing it as the commit to
fix for backporting purposes, even if this commit is not introducing
any bug makes sense.

Fixes: d44154f969 ("mtd: nand: Provide nand_cleanup() function to free NAND related resources")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: stable@vger.kernel.org
Cc: Paul Cercueil <paul@crapouillou.net>
Cc: Harvey Hunt <harveyhuntnexus@gmail.com>
Link: https://lore.kernel.org/linux-mtd/20200519130035.1883-22-miquel.raynal@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-22 09:31:25 +02:00
Miquel Raynal
38abdd9bf7 mtd: rawnand: sharpsl: Fix the probe error path
commit 0f44b3275b upstream.

nand_release() is supposed be called after MTD device registration.
Here, only nand_scan() happened, so use nand_cleanup() instead.

There is no Fixes tag applying here as the use of nand_release()
in this driver predates by far the introduction of nand_cleanup() in
commit d44154f969 ("mtd: nand: Provide nand_cleanup() function to free NAND related resources")
which makes this change possible. However, pointing this commit as the
culprit for backporting purposes makes sense.

Fixes: d44154f969 ("mtd: nand: Provide nand_cleanup() function to free NAND related resources")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/linux-mtd/20200519130035.1883-49-miquel.raynal@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-22 09:31:25 +02:00
Miquel Raynal
8d695fbaa5 mtd: rawnand: diskonchip: Fix the probe error path
commit c5be12e459 upstream.

Not sure nand_cleanup() is the right function to call here but in any
case it is not nand_release(). Indeed, even a comment says that
calling nand_release() is a bit of a hack as there is no MTD device to
unregister. So switch to nand_cleanup() for now and drop this
comment.

There is no Fixes tag applying here as the use of nand_release()
in this driver predates by far the introduction of nand_cleanup() in
commit d44154f969 ("mtd: nand: Provide nand_cleanup() function to free NAND related resources")
which makes this change possible. However, pointing this commit as the
culprit for backporting purposes makes sense even if it did not intruce
any bug.

Fixes: d44154f969 ("mtd: nand: Provide nand_cleanup() function to free NAND related resources")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/linux-mtd/20200519130035.1883-13-miquel.raynal@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-22 09:31:24 +02:00
Álvaro Fernández Rojas
1260c45ac5 mtd: rawnand: brcmnand: fix hamming oob layout
commit 130bbde480 upstream.

First 2 bytes are used in large-page nand.

Fixes: ef5eeea6e9 ("mtd: nand: brcm: switch to mtd_ooblayout_ops")
Cc: stable@vger.kernel.org
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20200512075733.745374-2-noltari@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-22 09:31:24 +02:00