odev pointer can be NULL in mtk_flow_offload_replace routine according
to the flower action rules. Fix possible NULL pointer dereference in
mtk_flow_get_wdma_info.
Fixes: a333215e10 ("net: ethernet: mtk_eth_soc: implement flow offloading to WED devices")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/4e1685bc4976e21e364055f6bee86261f8f9ee93.1658137753.git.lorenzo@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This fixes that the platform is waked by an unexpected packet. The
size and range of FIFO is different when the device enters S3 state,
so it is necessary to correct some settings when suspending.
Regardless of jumbo frame, set RMS to 1522 and MTPS to MTPS_DEFAULT.
Besides, enable MCU_BORW_EN to update the method of calculating the
pointer of data. Then, the hardware could get the correct data.
Fixes: 195aae321c ("r8152: support new chips")
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Link: https://lore.kernel.org/r/20220718082120.10957-391-nic_swsd@realtek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The value read from the "hpd-absent-delay-ms" property in DT was being
saved to the wrong variable, overriding the hpd_reliable delay. Fix the
typo.
Fixes: 5540cf8f3e ("drm/panel-edp: Implement generic "edp-panel"s probed by EDID")
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: André Almeida <andrealmeid@igalia.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220719203857.1488831-4-nfraprado@collabora.com
Fix a sparse warning in sev_guest_probe() where the wrong argument type is
provided to iounmap().
Fixes: fce96cf044 ("virt: Add SEV-SNP guest driver")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/202207150617.jqwQ0Rpz-lkp@intel.com
The purpose of commit 282d8998e9 ("srcu: Prevent expedited GPs
and blocking readers from consuming CPU") was to prevent a long
series of never-blocking expedited SRCU grace periods from blocking
kernel-live-patching (KLP) progress. Although it was successful, it also
resulted in excessive boot times on certain embedded workloads running
under qemu with the "-bios QEMU_EFI.fd" command line. Here "excessive"
means increasing the boot time up into the three-to-four minute range.
This increase in boot time was due to the more than 6000 back-to-back
invocations of synchronize_rcu_expedited() within the KVM host OS, which
in turn resulted from qemu's emulation of a long series of MMIO accesses.
Commit 640a7d37c3f4 ("srcu: Block less aggressively for expedited grace
periods") did not significantly help this particular use case.
Zhangfei Gao and Shameerali Kolothum Thodi did experiments varying the
value of SRCU_MAX_NODELAY_PHASE with HZ=250 and with various values
of non-sleeping per phase counts on a system with preemption enabled,
and observed the following boot times:
+──────────────────────────+────────────────+
| SRCU_MAX_NODELAY_PHASE | Boot time (s) |
+──────────────────────────+────────────────+
| 100 | 30.053 |
| 150 | 25.151 |
| 200 | 20.704 |
| 250 | 15.748 |
| 500 | 11.401 |
| 1000 | 11.443 |
| 10000 | 11.258 |
| 1000000 | 11.154 |
+──────────────────────────+────────────────+
Analysis on the experiment results show additional improvements with
CPU-bound delays approaching one jiffy in duration. This improvement was
also seen when number of per-phase iterations were scaled to one jiffy.
This commit therefore scales per-grace-period phase number of non-sleeping
polls so that non-sleeping polls extend for about one jiffy. In addition,
the delay-calculation call to srcu_get_delay() in srcu_gp_end() is
replaced with a simple check for an expedited grace period. This change
schedules callback invocation immediately after expedited grace periods
complete, which results in greatly improved boot times. Testing done
by Marc and Zhangfei confirms that this change recovers most of the
performance degradation in boottime; for CONFIG_HZ_250 configuration,
specifically, boot times improve from 3m50s to 41s on Marc's setup;
and from 2m40s to ~9.7s on Zhangfei's setup.
In addition to the changes to default per phase delays, this
change adds 3 new kernel parameters - srcutree.srcu_max_nodelay,
srcutree.srcu_max_nodelay_phase, and srcutree.srcu_retry_check_delay.
This allows users to configure the srcu grace period scanning delays in
order to more quickly react to additional use cases.
Fixes: 640a7d37c3f4 ("srcu: Block less aggressively for expedited grace periods")
Fixes: 282d8998e9 ("srcu: Prevent expedited GPs and blocking readers from consuming CPU")
Reported-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Reported-by: yueluck <yueluck@163.com>
Signed-off-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Tested-by: Marc Zyngier <maz@kernel.org>
Tested-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Link: https://lore.kernel.org/all/20615615-0013-5adc-584f-2b1d5c03ebfc@linaro.org/
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Commit 282d8998e9 ("srcu: Prevent expedited GPs and blocking readers
from consuming CPU") fixed a problem where a long-running expedited SRCU
grace period could block kernel live patching. It did so by giving up
on expediting once a given SRCU expedited grace period grew too old.
Unfortunately, this added excessive delays to boots of virtual embedded
systems specifying "-bios QEMU_EFI.fd" to qemu. This commit therefore
makes the transition away from expediting less aggressive, increasing
the per-grace-period phase number of non-sleeping polls of readers from
one to three and increasing the required grace-period age from one jiffy
(actually from zero to one jiffies) to two jiffies (actually from one
to two jiffies).
Fixes: 282d8998e9 ("srcu: Prevent expedited GPs and blocking readers from consuming CPU")
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reported-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Reported-by: chenxiang (M)" <chenxiang66@hisilicon.com>
Cc: Shameerali Kolothum Thodi <shameerali.kolothum.thodi@huawei.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Link: https://lore.kernel.org/all/20615615-0013-5adc-584f-2b1d5c03ebfc@linaro.org/
The flags for KVM_CAP_X86_USER_SPACE_MSR and KVM_X86_SET_MSR_FILTER
have no protection for their unused bits. Without protection, future
development for these features will be difficult. Add the protection
needed to make it possible to extend these features in the future.
Signed-off-by: Aaron Lewis <aaronlewis@google.com>
Message-Id: <20220714161314.1715227-1-aaronlewis@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Silence this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/kvm.h' differs from latest version at 'include/uapi/linux/kvm.h'
diff -u tools/include/uapi/linux/kvm.h include/uapi/linux/kvm.h
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In rseq_test, there are two threads, which are vCPU thread and migration
worker separately. Unfortunately, the test has the wrong PID passed to
sched_setaffinity() in the migration worker. It forces migration on the
migration worker because zeroed PID represents the calling thread, which
is the migration worker itself. It means the vCPU thread is never enforced
to migration and it can migrate at any time, which eventually leads to
failure as the following logs show.
host# uname -r
5.19.0-rc6-gavin+
host# # cat /proc/cpuinfo | grep processor | tail -n 1
processor : 223
host# pwd
/home/gavin/sandbox/linux.main/tools/testing/selftests/kvm
host# for i in `seq 1 100`; do \
echo "--------> $i"; ./rseq_test; done
--------> 1
--------> 2
--------> 3
--------> 4
--------> 5
--------> 6
==== Test Assertion Failure ====
rseq_test.c:265: rseq_cpu == cpu
pid=3925 tid=3925 errno=4 - Interrupted system call
1 0x0000000000401963: main at rseq_test.c:265 (discriminator 2)
2 0x0000ffffb044affb: ?? ??:0
3 0x0000ffffb044b0c7: ?? ??:0
4 0x0000000000401a6f: _start at ??:?
rseq CPU = 4, sched CPU = 27
Fix the issue by passing correct parameter, TID of the vCPU thread, to
sched_setaffinity() in the migration worker.
Fixes: 61e52f1630 ("KVM: selftests: Add a test for KVM_RUN+rseq to detect task migration bugs")
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Message-Id: <20220719020830.3479482-1-gshan@redhat.com>
Reviewed-by: Andrew Jones <andrew.jones@linux.dev>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
commit 1b870fa557 ("kvm: stats: tell userspace which values are
boolean") added a new stat unit (boolean) but failed to raise
KVM_STATS_UNIT_MAX.
Fix by pointing UNIT_MAX at the new max value of UNIT_BOOLEAN.
Fixes: 1b870fa557 ("kvm: stats: tell userspace which values are boolean")
Reported-by: Janis Schoetterl-Glausch <scgl@linux.ibm.com>
Signed-off-by: Oliver Upton <oupton@google.com>
Message-Id: <20220719125229.2934273-1-oupton@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Taehee Yoo says:
====================
amt: fix validation and synchronization bugs
There are some synchronization issues in the amt module.
Especially, an amt gateway doesn't well synchronize its own variables
and status(amt->status).
It tries to use a workqueue for handles in a single thread.
A global lock is also good, but it would occur complex locking complex.
In this patchset, only the gateway uses workqueue.
The reason why only gateway interface uses workqueue is that gateway
should manage its own states and variables a little bit statefully.
But relay doesn't need to manage tunnels statefully, stateless is okay.
So, relay side message handlers are okay to be called concurrently.
But it doesn't mean that no lock is needed.
Only amt multicast data message type will not be processed by the work
queue because It contains actual multicast data.
So, it should be processed immediately.
When any amt gateway events are triggered(sending discovery message by
delayed_work, sending request message by delayed_work and receiving
messages), it stores event and skb into the event queue(amt->events[16]).
Then, workqueue processes these events one by one.
The first patch is to use the work queue.
The second patch is to remove unnecessary lock due to a previous patch.
The third patch is to use READ_ONCE() in the amt module.
Even if the amt module uses a single thread, some variables (ready4,
ready6, amt->status) can be accessed concurrently.
The fourth patch is to add missing nonce generation logic when it sends a
new request message.
The fifth patch is to drop unexpected advertisement messages.
advertisement message should be received only after the gateway sends
a discovery message first.
So, the gateway should drop advertisement messages if it has never
sent a discovery message and it also should drop duplicate advertisement
messages.
Using nonce is good to distinguish whether a received message is an
expected message or not.
The sixth patch is to drop unexpected query messages.
This is the same behavior as the fourth patch.
Query messages should be received only after the gateway sends a request
message first.
The nonce variable is used to distinguish whether it is a reply to a
previous request message or not.
amt->ready4 and amt->ready6 are used to distinguish duplicate messages.
The seventh patch is to drop unexpected multicast data.
AMT gateway should not receive multicast data message type before
establish between gateway and relay.
In order to drop unexpected multicast data messages, it checks amt->status.
The last patch is to fix a locking problem on the relay side.
amt->nr_tunnels variable is protected by amt->lock.
But amt_request_handler() doesn't protect this variable.
v2:
- Use local_bh_disable() instead of rcu_read_lock_bh() in
amt_membership_query_handler.
- Fix using uninitialized variables.
- Fix unexpectedly start the event_wq after stopping.
- Fix possible deadlock in amt_event_work().
- Add a limit variable in amt_event_work() to prevent infinite working.
- Rename amt_queue_events() to amt_queue_event().
====================
Link: https://lore.kernel.org/r/20220717160910.19156-1-ap420073@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
amt->nr_tunnels is protected by amt->lock.
But, amt_request_handler() has been using this variable without the
amt->lock.
So, it expands context of amt->lock in the amt_request_handler() to
protect amt->nr_tunnels variable.
Fixes: cbc21dc1cf ("amt: add data plane of amt interface")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
AMT gateway interface should not receive unexpected multicast data.
Multicast data message type should be received after sending an update
message, which means all establishment between gateway and relay is
finished.
So, amt_multicast_data_handler() checks amt->status.
Fixes: cbc21dc1cf ("amt: add data plane of amt interface")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
AMT gateway interface should not receive unexpected query messages.
In order to drop unexpected query messages, it checks nonce.
And it also checks ready4 and ready6 variables to drop duplicated messages.
Fixes: cbc21dc1cf ("amt: add data plane of amt interface")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
AMT gateway interface should not receive unexpected advertisement messages.
In order to drop these packets, it should check nonce and amt->status.
Fixes: cbc21dc1cf ("amt: add data plane of amt interface")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When AMT gateway starts sending a new request message, it should
regenerate the nonce variable.
Fixes: cbc21dc1cf ("amt: add data plane of amt interface")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
There are some data races in the amt module.
amt->ready4, amt->ready6, and amt->status can be accessed concurrently
without locks.
So, it uses READ_ONCE() and WRITE_ONCE().
Fixes: cbc21dc1cf ("amt: add data plane of amt interface")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
By the previous patch, amt gateway handlers are changed to worked by
a single thread.
So, most locks for gateway are not needed.
So, it removes.
Fixes: cbc21dc1cf ("amt: add data plane of amt interface")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
There are some synchronization issues(amt->status, amt->req_cnt, etc)
if the interface is in gateway mode because gateway message handlers
are processed concurrently.
This applies a work queue for processing these messages instead of
expanding the locking context.
So, the purposes of this patch are to fix exist race conditions and to make
gateway to be able to validate a gateway status more correctly.
When the AMT gateway interface is created, it tries to establish to relay.
The establishment step looks stateless, but it should be managed well.
In order to handle messages in the gateway, it saves the current
status(i.e. AMT_STATUS_XXX).
This patch makes gateway code to be worked with a single thread.
Now, all messages except the multicast are triggered(received or
delay expired), and these messages will be stored in the event
queue(amt->events).
Then, the single worker processes stored messages asynchronously one
by one.
The multicast data message type will be still processed immediately.
Now, amt->lock is only needed to access the event queue(amt->events)
if an interface is the gateway mode.
Fixes: cbc21dc1cf ("amt: add data plane of amt interface")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add spi_device_id entries to silent SPI warnings.
Fixes: 5fa6863ba6 ("spi: Check we have a spi_device_id for each DT compatible")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20220717135831.2492844-2-o.rempel@pengutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add spi_device_id entries to silent following warnings:
SPI driver sja1105 has no spi_device_id for nxp,sja1105e
SPI driver sja1105 has no spi_device_id for nxp,sja1105t
SPI driver sja1105 has no spi_device_id for nxp,sja1105p
SPI driver sja1105 has no spi_device_id for nxp,sja1105q
SPI driver sja1105 has no spi_device_id for nxp,sja1105r
SPI driver sja1105 has no spi_device_id for nxp,sja1105s
SPI driver sja1105 has no spi_device_id for nxp,sja1110a
SPI driver sja1105 has no spi_device_id for nxp,sja1110b
SPI driver sja1105 has no spi_device_id for nxp,sja1110c
SPI driver sja1105 has no spi_device_id for nxp,sja1110d
Fixes: 5fa6863ba6 ("spi: Check we have a spi_device_id for each DT compatible")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220717135831.2492844-1-o.rempel@pengutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
be_cmd_read_port_transceiver_data assumes that it is given a buffer that
is at least PAGE_DATA_LEN long, or twice that if the module supports SFF
8472. However, this is not always the case.
Fix this by passing the desired offset and length to
be_cmd_read_port_transceiver_data so that we only copy the bytes once.
Fixes: e36edd9d26 ("be2net: add ethtool "-m" option support")
Signed-off-by: Hristo Venev <hristo@venev.name>
Link: https://lore.kernel.org/r/20220716085134.6095-1-hristo@venev.name
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
For regcache_sync_region, we need to use pca953x_recalc_addr() to get
the real register address.
Fixes: ec82d1eba3 ("gpio: pca953x: Zap ad-hoc reg_output cache")
Fixes: 0f25fda840 ("gpio: pca953x: Zap ad-hoc reg_direction cache")
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
regmap will sync a range of registers, here use the correct range
to make sure the sync do not touch other unexpected registers.
Find on pca9557pw on imx8qxp/dxl evk board, this device support
8 pin, so only need one register(8 bits) to cover all the 8 pins's
property setting. But when sync the output, we find it actually
update two registers, output register and the following register.
Fixes: b765743005 ("gpio: pca953x: Restore registers after suspend/resume cycle")
Fixes: ec82d1eba3 ("gpio: pca953x: Zap ad-hoc reg_output cache")
Fixes: 0f25fda840 ("gpio: pca953x: Zap ad-hoc reg_direction cache")
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
For the device use NO AI mode(not support auto address increment),
only use the single read/write when config the regmap.
We meet issue on PCA9557PW on i.MX8QXP/DXL evk board, this device
do not support AI mode, but when do the regmap sync, regmap will
sync 3 byte data to register 1, logically this means write first
data to register 1, write second data to register 2, write third data
to register 3. But this device do not support AI mode, finally, these
three data write only into register 1 one by one. the reault is the
value of register 1 alway equal to the latest data, here is the third
data, no operation happened on register 2 and register 3. This is
not what we expect.
Fixes: 4942723276 ("gpio: pca953x: Perform basic regmap conversion")
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
The register address used for the clock gate register is the base
register address coming from first reg map (ie. the generic
clock registers) instead of the second reg map defining the clock
gate register.
Use the correct clock gate register address.
Fixes: 5ad5915dea ("clk: lan966x: Extend lan966x clock driver for clock gating support")
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Link: https://lore.kernel.org/r/20220704102845.168438-2-herve.codina@bootlin.com
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Tested-by: Michael Walle <michael@walle.cc>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Disable is done in stmmac_init_eee() on the event of MAC link down.
Since setting enable/disable EEE via ethtool will eventually trigger
a MAC down, removing this redunctant call in stmmac_ethtool.c to avoid
calling xpcs_config_eee() twice.
Fixes: d4aeaed80b ("net: stmmac: trigger PCS EEE to turn off on link down")
Signed-off-by: Wong Vee Khee <vee.khee.wong@linux.intel.com>
Link: https://lore.kernel.org/r/20220715122402.1017470-1-vee.khee.wong@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean says:
====================
Fix 2 DSA issues with vlan_filtering_is_global
This patch set fixes 2 issues with vlan_filtering_is_global switches.
Both are regressions introduced by refactoring commit d0004a020b
("net: dsa: remove the "dsa_to_port in a loop" antipattern from the
core"), which wasn't tested on a wide enough variety of switches.
Tested on the sja1105 driver.
====================
Link: https://lore.kernel.org/r/20220715151659.780544-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The "ds" iterator variable used in dsa_port_reset_vlan_filtering() ->
dsa_switch_for_each_port() overwrites the "dp" received as argument,
which is later used to call dsa_port_vlan_filtering() proper.
As a result, switches which do enter that code path (the ones with
vlan_filtering_is_global=true) will dereference an invalid dp in
dsa_port_reset_vlan_filtering() after leaving a VLAN-aware bridge.
Use a dedicated "other_dp" iterator variable to avoid this from
happening.
Fixes: d0004a020b ("net: dsa: remove the "dsa_to_port in a loop" antipattern from the core")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The blamed refactoring commit changed a "port" iterator with "other_dp",
but still looked at the slave_dev of the dp outside the loop, instead of
other_dp->slave from the loop.
As a result, dsa_port_vlan_filtering() would not call
dsa_slave_manage_vlan_filtering() except for the port in cause, and not
for all switch ports as expected.
Fixes: d0004a020b ("net: dsa: remove the "dsa_to_port in a loop" antipattern from the core")
Reported-by: Lucian Banu <Lucian.Banu@westermo.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix an issue when driver incorrectly detects state
of recovery process and erroneously reinitializes interrupts,
which results in a kernel error and call trace message.
The issue was caused by a combination of two factors:
1. Assuming the EMP reset issued after completing
firmware recovery means the whole recovery process is complete.
2. Erroneous reinitialization of interrupt vector after detecting
the above mentioned EMP reset.
Fixes (1) by changing how recovery state change is detected
and (2) by adjusting the conditional expression to ensure using proper
interrupt reinitialization method, depending on the situation.
Fixes: 4ff0ee1af0 ("i40e: Introduce recovery mode support")
Signed-off-by: Dawid Lukwinski <dawid.lukwinski@intel.com>
Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20220715214542.2968762-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In mtk_wed_tx_ring_setup(.., int idx, ..), idx is used as an index here
struct mtk_wed_ring *ring = &dev->tx_ring[idx];
The bounds of idx are checked here
BUG_ON(idx > ARRAY_SIZE(dev->tx_ring));
If idx is the size of the array, it will pass this check and overflow.
So change the check to >= .
Fixes: 804775dfc2 ("net: ethernet: mtk_eth_soc: add support for Wireless Ethernet Dispatch (WED)")
Signed-off-by: Tom Rix <trix@redhat.com>
Link: https://lore.kernel.org/r/20220716214654.1540240-1-trix@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Horatiu Vultur says:
====================
net: lan966x: Fix issues with MAC table
The patch series fixes 2 issues:
- when an entry was forgotten the irq thread was holding a spin lock and then
was talking also rtnl_lock.
- the access to the HW MAC table is indirect, so the access to the HW MAC
table was not synchronized, which means that there could be race conditions.
====================
Link: https://lore.kernel.org/r/20220714194040.231651-1-horatiu.vultur@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When the SW bridge was trying to add/remove entries to/from HW, the
access to HW was not protected by any lock. In this way, it was
possible to have race conditions.
Fix this by using the lan966x->mac_lock to protect parallel access to HW
for this cases.
Fixes: 25ee9561ec ("net: lan966x: More MAC table functionality")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The problem with this spin lock is that it was just protecting the list
of the MAC entries in SW and not also the access to the MAC entries in HW.
Because the access to HW is indirect, then it could happen to have race
conditions.
For example when SW introduced an entry in MAC table and the irq mac is
trying to read something from the MAC.
Update such that also the access to MAC entries in HW is protected by
this lock.
Fixes: 5ccd66e01c ("net: lan966x: add support for interrupts from analyzer")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
To remove an entry to the MAC table, it is required first to setup the
entry and then issue a command for the MAC to forget the entry.
So if it happens for two threads to remove simultaneously an entry
in MAC table then it would be a race condition.
Fix this by using lan966x->mac_lock to protect the HW access.
Fixes: e18aba8941 ("net: lan966x: add mactable support")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
To add an entry to the MAC table, it is required first to setup the
entry and then issue a command for the MAC to learn the entry.
So if it happens for two threads to add simultaneously an entry in MAC
table then it would be a race condition.
Fix this by using lan966x->mac_lock to protect the HW access.
Fixes: fc0c3fe748 ("net: lan966x: Add function lan966x_mac_ip_learn()")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When the HW deletes an entry in MAC table then it generates an
interrupt. The SW will go through it's own list of MAC entries and if it
is not found then it would notify the listeners about this. The problem
is that when the SW will go through it's own list it would take a spin
lock(lan966x->mac_lock) and when it notifies that the entry is deleted.
But to notify the listeners it taking the rtnl_lock which is illegal.
This is fixed by instead of notifying right away that the entry is
deleted, move the entry on a temp list and once, it checks all the
entries then just notify that the entries from temp list are deleted.
Fixes: 5ccd66e01c ("net: lan966x: add support for interrupts from analyzer")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Two bug fixes for irdma:
- x722 does not support 1GB pages, trying to configure them will corrupt
the dma mapping
- Fix a sleep while holding a spinlock
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCYtXkFgAKCRCFwuHvBreF
YUYpAQCyJax6IA7UKZr48gFDCtjQvn75JGtGE0yeD1Ag8trqQQEAtaErEgUVn4LG
zLKOn8F5nbdrtBgql7c5ZUZCNbsn2QM=
=IN55
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
"Two bug fixes for irdma:
- x722 does not support 1GB pages, trying to configure them will
corrupt the dma mapping
- Fix a sleep while holding a spinlock"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/irdma: Fix sleep from invalid context BUG
RDMA/irdma: Do not advertise 1GB page size for x722
The irqchip->irq_set_type method is called by __irq_set_trigger() under
the desc->lock raw spinlock.
The armada-37xx implementation, armada_37xx_irq_set_type(), uses an MMIO
regmap created by of_syscon_register(), which uses plain spinlocks
(the kind that are sleepable on RT).
Therefore, this is an invalid locking scheme for which we get a kernel
splat stating just that ("[ BUG: Invalid wait context ]"), because the
context in which the plain spinlock may sleep is atomic due to the raw
spinlock. We need to go raw spinlocks all the way.
Make this driver create its own MMIO regmap, with use_raw_spinlock=true,
and stop relying on syscon to provide it.
This patch depends on commit 67021f25d9 ("regmap: teach regmap to use
raw spinlocks if requested in the config").
Cc: <stable@vger.kernel.org> # 5.15+
Fixes: 2f22760539 ("pinctrl: armada-37xx: Add irqchip support")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20220716233745.1704677-3-vladimir.oltean@nxp.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The irqchip->irq_set_type method is called by __irq_set_trigger() under
the desc->lock raw spinlock.
The armada-37xx implementation, armada_37xx_irq_set_type(), takes a
plain spinlock, the kind that becomes sleepable on RT.
Therefore, this is an invalid locking scheme for which we get a kernel
splat stating just that ("[ BUG: Invalid wait context ]"), because the
context in which the plain spinlock may sleep is atomic due to the raw
spinlock. We need to go raw spinlocks all the way.
Replace the driver's irq_lock with a raw spinlock, to disable preemption
even on RT.
Cc: <stable@vger.kernel.org> # 5.15+
Fixes: 2f22760539 ("pinctrl: armada-37xx: Add irqchip support")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20220716233745.1704677-2-vladimir.oltean@nxp.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This contains a single fix for an out-of-sync kerneldoc comment.
-----BEGIN PGP SIGNATURE-----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=Uv1q
-----END PGP SIGNATURE-----
Merge tag 'hte/for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux
Pull hardware timestamp fix from Thierry Reding:
"A single fix for an out-of-sync kerneldoc comment"
* tag 'hte/for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
gpiolib: cdev: Fix kernel doc for struct line
Commit 0651ab90e4 ("ACPI: CPPC: Check _OSC for flexible address space")
changed _CPC probing to require flexible address space to be negotiated
for CPPC to work.
However it was observed that this caused a regression for Arek's ROG
Zephyrus G15 GA503QM which previously CPPC worked, but now it stopped
working.
To avoid causing a regression waive this failure when the CPU is known
to support CPPC.
Cc: Pierre Gondois <pierre.gondois@arm.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216248
Fixes: 0651ab90e4 ("ACPI: CPPC: Check _OSC for flexible address space")
Reported-and-tested-by: Arek Ruśniak <arek.rusi@gmail.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Fix debug prints, by adding missing state prints.
Extend iavf_state_str by strings for __IAVF_INIT_EXTENDED_CAPS and
__IAVF_INIT_CONFIG_ADAPTER.
Without this patch, when enabling debug prints for iavf.h, user will
see:
iavf 0000:06:0e.0: state transition from:__IAVF_INIT_GET_RESOURCES to:__IAVF_UNKNOWN_STATE
iavf 0000:06:0e.0: state transition from:__IAVF_UNKNOWN_STATE to:__IAVF_UNKNOWN_STATE
Fixes: 605ca7c5c6 ("iavf: Fix kernel BUG in free_msi_irqs")
Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com>
Signed-off-by: Jun Zhang <xuejun.zhang@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Fix memory leak caused by not handling dummy receive descriptor properly.
iavf_get_rx_buffer now sets the rx_buffer return value for dummy receive
descriptors. Without this patch, when the hardware writes a dummy
descriptor, iavf would not free the page allocated for the previous receive
buffer. This is an unlikely event but can still happen.
[Jesse: massaged commit message]
Fixes: efa14c3985 ("iavf: allow null RX descriptors")
Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Remove from supported_coalesce_params ETHTOOL_COALESCE_MAX_FRAMES
and ETHTOOL_COALESCE_MAX_FRAMES_IRQ. As tx-frames-irq allowed
user to change budget for iavf_clean_tx_irq, remove work_limit
and use define for budget.
Without this patch there would be possibility to change rx/tx-frames
and rx/tx-frames-irq, which for rx/tx-frames did nothing, while for
rx/tx-frames-irq it changed rx/tx-frames and only changed budget
for cleaning NAPI poll.
Fixes: fbb7ddfef2 ("i40evf: core ethtool functionality")
Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com>
Signed-off-by: Jun Zhang <xuejun.zhang@intel.com>
Tested-by: Marek Szlosek <marek.szlosek@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
