The rcu_barrier_callback() function does an atomic_dec_and_test(), and
if it is the last CPU to check in, does the required wakeup. Either way,
it does an event trace. Unfortunately, this is susceptible to the
following sequence of events:
o CPU 0 invokes rcu_barrier_callback(), but atomic_dec_and_test()
says that it is not last. But at this point, CPU 0 is delayed,
perhaps due to an NMI, SMI, or vCPU preemption.
o CPU 1 invokes rcu_barrier_callback(), and atomic_dec_and_test()
says that it is last. So CPU 1 traces completion and does
the needed wakeup.
o The awakened rcu_barrier() function does cleanup and releases
rcu_state.barrier_mutex.
o Another CPU now acquires rcu_state.barrier_mutex and starts
another round of rcu_barrier() processing, including updating
rcu_state.barrier_sequence.
o CPU 0 gets its act back together and does its tracing. Except
that rcu_state.barrier_sequence has already been updated, so
its tracing is incorrect and probably quite confusing.
(Wait! Why did this CPU check in twice for one rcu_barrier()
invocation???)
This commit therefore causes rcu_barrier_callback() to take a
snapshot of the value of rcu_state.barrier_sequence before invoking
atomic_dec_and_test(), thus guaranteeing that the event-trace output
is sensible, even if the timing of the event-trace output might still
be confusing. (Wait! Why did the old rcu_barrier() complete before
all of its CPUs checked in???) But being that this is RCU, only so much
confusion can reasonably be eliminated.
This data race was reported by KCSAN. Not appropriate for backporting
due to failure being unlikely and due to the mild consequences of the
failure, namely a confusing event trace.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The rcu_state structure's ->gp_start field is read locklessly, so this
commit adds the WRITE_ONCE() to an update in order to provide proper
documentation and READ_ONCE()/WRITE_ONCE() pairing.
This data race was reported by KCSAN. Not appropriate for backporting
due to failure being unlikely.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The rcu_segcblist_insert_pend_cbs() function currently (partially)
initializes the rcu_cblist that it pulls callbacks from. However, all
the resulting stores are dead because all callers pass in the address of
an on-stack cblist that is not used afterwards. This commit therefore
removes this pointless initialization.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The timer_pending() function is mostly used in lockless contexts, so
Without proper annotations, KCSAN might detect a data-race [1].
Using hlist_unhashed_lockless() instead of hand-coding it seems
appropriate (as suggested by Paul E. McKenney).
[1]
BUG: KCSAN: data-race in del_timer / detach_if_pending
write to 0xffff88808697d870 of 8 bytes by task 10 on cpu 0:
__hlist_del include/linux/list.h:764 [inline]
detach_timer kernel/time/timer.c:815 [inline]
detach_if_pending+0xcd/0x2d0 kernel/time/timer.c:832
try_to_del_timer_sync+0x60/0xb0 kernel/time/timer.c:1226
del_timer_sync+0x6b/0xa0 kernel/time/timer.c:1365
schedule_timeout+0x2d2/0x6e0 kernel/time/timer.c:1896
rcu_gp_fqs_loop+0x37c/0x580 kernel/rcu/tree.c:1639
rcu_gp_kthread+0x143/0x230 kernel/rcu/tree.c:1799
kthread+0x1d4/0x200 drivers/block/aoe/aoecmd.c:1253
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:352
read to 0xffff88808697d870 of 8 bytes by task 12060 on cpu 1:
del_timer+0x3b/0xb0 kernel/time/timer.c:1198
sk_stop_timer+0x25/0x60 net/core/sock.c:2845
inet_csk_clear_xmit_timers+0x69/0xa0 net/ipv4/inet_connection_sock.c:523
tcp_clear_xmit_timers include/net/tcp.h:606 [inline]
tcp_v4_destroy_sock+0xa3/0x3f0 net/ipv4/tcp_ipv4.c:2096
inet_csk_destroy_sock+0xf4/0x250 net/ipv4/inet_connection_sock.c:836
tcp_close+0x6f3/0x970 net/ipv4/tcp.c:2497
inet_release+0x86/0x100 net/ipv4/af_inet.c:427
__sock_release+0x85/0x160 net/socket.c:590
sock_close+0x24/0x30 net/socket.c:1268
__fput+0x1e1/0x520 fs/file_table.c:280
____fput+0x1f/0x30 fs/file_table.c:313
task_work_run+0xf6/0x130 kernel/task_work.c:113
tracehook_notify_resume include/linux/tracehook.h:188 [inline]
exit_to_usermode_loop+0x2b4/0x2c0 arch/x86/entry/common.c:163
Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 12060 Comm: syz-executor.5 Not tainted 5.4.0-rc3+ #0
Hardware name: Google Google Compute Engine/Google Compute Engine,
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
[ paulmck: Pulled in Eric's later amendments. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The rcu_node structure's ->boost_kthread_status field is accessed
locklessly, so this commit causes all updates to use WRITE_ONCE() and
all reads to use READ_ONCE().
This data race was reported by KCSAN. Not appropriate for backporting
due to failure being unlikely.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The rcu_data structure's ->rcu_forced_tick field is read locklessly, so
this commit adds WRITE_ONCE() to all updates and READ_ONCE() to all
lockless reads.
This data race was reported by KCSAN. Not appropriate for backporting
due to failure being unlikely.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The rcu_data structure's ->gpwrap field is read locklessly, and so
this commit adds the required READ_ONCE() to a pair of laods in order
to avoid destructive compiler optimizations.
This data race was reported by KCSAN.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Convert to plural and add a note that this is for Tree RCU.
Signed-off-by: SeongJae Park <sjpark@amazon.de>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The various RCU structures' ->gp_seq, ->gp_seq_needed, ->gp_req_activity,
and ->gp_activity fields are read locklessly, so they must be updated with
WRITE_ONCE() and, when read locklessly, with READ_ONCE(). This commit makes
these changes.
This data race was reported by KCSAN. Not appropriate for backporting
due to failure being unlikely.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The rcu_segcblist structure's ->tails[] array entries are read
locklessly, so this commit adds the READ_ONCE() to a load in order to
avoid destructive compiler optimizations.
This data race was reported by KCSAN.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The rt_mutex structure's ->owner field is read locklessly, so this
commit adds the WRITE_ONCE() to an update in order to provide proper
documentation and READ_ONCE()/WRITE_ONCE() pairing.
This data race was reported by KCSAN. Not appropriate for backporting
due to failure being unlikely.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Will Deacon <will@kernel.org>
The rcu_state structure's ->qsmaskinitnext field is read locklessly,
so this commit adds the WRITE_ONCE() to an update in order to provide
proper documentation and READ_ONCE()/WRITE_ONCE() pairing.
This data race was reported by KCSAN. Not appropriate for backporting
due to failure being unlikely for systems not doing incessant CPU-hotplug
operations.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The rcu_state structure's ->gp_req_activity field is read locklessly,
so this commit adds the WRITE_ONCE() to an update in order to provide
proper documentation and READ_ONCE()/WRITE_ONCE() pairing.
This data race was reported by KCSAN. Not appropriate for backporting
due to failure being unlikely.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The rcu_node structure's ->gp_seq field is read locklessly, so this
commit adds the READ_ONCE() to several loads in order to avoid
destructive compiler optimizations.
This data race was reported by KCSAN. Not appropriate for backporting
because this affects only tracing and warnings.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The rcu_node structure's ->exp_seq_rq field is read locklessly, so
this commit adds the WRITE_ONCE() to a load in order to provide proper
documentation and READ_ONCE()/WRITE_ONCE() pairing.
This data race was reported by KCSAN. Not appropriate for backporting
due to failure being unlikely.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The rcu_node structure's ->qsmask field is read locklessly, so this
commit adds the WRITE_ONCE() to an update in order to provide proper
documentation and READ_ONCE()/WRITE_ONCE() pairing.
This data race was reported by KCSAN. Not appropriate for backporting
due to failure being unlikely.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit adds "-g -fno-omit-frame-pointer" to ease interpretation
of KCSAN output, but only for CONFIG_KCSAN=y kerrnels.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The rcu_node structure's ->exp_seq_rq field is accessed locklessly, so
updates must use WRITE_ONCE(). This commit therefore adds the needed
WRITE_ONCE() invocation where it was missed.
This data race was reported by KCSAN. Not appropriate for backporting
due to failure being unlikely.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The for_each_leaf_node_cpu_mask() and for_each_leaf_node_possible_cpu()
macros must be invoked only on leaf rcu_node structures. Failing to
abide by this restriction can result in infinite loops on systems with
more than 64 CPUs (or for more than 32 CPUs on 32-bit systems). This
commit therefore adds WARN_ON_ONCE() calls to make misuse of these two
macros easier to debug.
Reported-by: Qian Cai <cai@lca.pw>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
- fix randconfig to generate a sane .config
- rename hostprogs-y / always to hostprogs / always-y, which are
more natual syntax.
- optimize scripts/kallsyms
- fix yes2modconfig and mod2yesconfig
- make multiple directory targets ('make foo/ bar/') work
-----BEGIN PGP SIGNATURE-----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=sv4U
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull more Kbuild updates from Masahiro Yamada:
- fix randconfig to generate a sane .config
- rename hostprogs-y / always to hostprogs / always-y, which are more
natual syntax.
- optimize scripts/kallsyms
- fix yes2modconfig and mod2yesconfig
- make multiple directory targets ('make foo/ bar/') work
* tag 'kbuild-v5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: make multiple directory targets work
kconfig: Invalidate all symbols after changing to y or m.
kallsyms: fix type of kallsyms_token_table[]
scripts/kallsyms: change table to store (strcut sym_entry *)
scripts/kallsyms: rename local variables in read_symbol()
kbuild: rename hostprogs-y/always to hostprogs/always-y
kbuild: fix the document to use extra-y for vmlinux.lds
kconfig: fix broken dependency in randconfig-generated .config
- Ensure that the PIT is set up when the local APIC is disable or
configured in legacy mode. This is caused by an ordering issue
introduced in the recent changes which skip PIT initialization when the
TSC and APIC frequencies are already known.
- Handle malformed SRAT tables during early ACPI parsing which caused an
infinite loop anda boot hang.
- Fix a long standing race in the affinity setting code which affects PCI
devices with non-maskable MSI interrupts. The problem is caused by the
non-atomic writes of the MSI address (destination APIC id) and data
(vector) fields which the device uses to construct the MSI message. The
non-atomic writes are mandated by PCI.
If both fields change and the device raises an interrupt after writing
address and before writing data, then the MSI block constructs a
inconsistent message which causes interrupts to be lost and subsequent
malfunction of the device.
The fix is to redirect the interrupt to the new vector on the current
CPU first and then switch it over to the new target CPU. This allows to
observe an eventually raised interrupt in the transitional stage (old
CPU, new vector) to be observed in the APIC IRR and retriggered on the
new target CPU and the new vector. The potential spurious interrupts
caused by this are harmless and can in the worst case expose a buggy
driver (all handlers have to be able to deal with spurious interrupts as
they can and do happen for various reasons).
- Add the missing suspend/resume mechanism for the HYPERV hypercall page
which prevents resume hibernation on HYPERV guests. This change got
lost before the merge window.
- Mask the IOAPIC before disabling the local APIC to prevent potentially
stale IOAPIC remote IRR bits which cause stale interrupt lines after
resume.
-----BEGIN PGP SIGNATURE-----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=WxKD
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2020-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"A set of fixes for X86:
- Ensure that the PIT is set up when the local APIC is disable or
configured in legacy mode. This is caused by an ordering issue
introduced in the recent changes which skip PIT initialization when
the TSC and APIC frequencies are already known.
- Handle malformed SRAT tables during early ACPI parsing which caused
an infinite loop anda boot hang.
- Fix a long standing race in the affinity setting code which affects
PCI devices with non-maskable MSI interrupts. The problem is caused
by the non-atomic writes of the MSI address (destination APIC id)
and data (vector) fields which the device uses to construct the MSI
message. The non-atomic writes are mandated by PCI.
If both fields change and the device raises an interrupt after
writing address and before writing data, then the MSI block
constructs a inconsistent message which causes interrupts to be
lost and subsequent malfunction of the device.
The fix is to redirect the interrupt to the new vector on the
current CPU first and then switch it over to the new target CPU.
This allows to observe an eventually raised interrupt in the
transitional stage (old CPU, new vector) to be observed in the APIC
IRR and retriggered on the new target CPU and the new vector.
The potential spurious interrupts caused by this are harmless and
can in the worst case expose a buggy driver (all handlers have to
be able to deal with spurious interrupts as they can and do happen
for various reasons).
- Add the missing suspend/resume mechanism for the HYPERV hypercall
page which prevents resume hibernation on HYPERV guests. This
change got lost before the merge window.
- Mask the IOAPIC before disabling the local APIC to prevent
potentially stale IOAPIC remote IRR bits which cause stale
interrupt lines after resume"
* tag 'x86-urgent-2020-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/apic: Mask IOAPIC entries when disabling the local APIC
x86/hyperv: Suspend/resume the hypercall page for hibernation
x86/apic/msi: Plug non-maskable MSI affinity race
x86/boot: Handle malformed SRAT tables during early ACPI parsing
x86/timer: Don't skip PIT setup when APIC is disabled or in legacy mode
- Make the UP version of smp_call_function_single() match SMP semantics
when called for a not available CPU. Instead of emitting a warning and
assuming that the function call target is CPU0, return a proper error
code like the SMP version does.
- Remove a superfluous check in smp_call_function_many_cond()
-----BEGIN PGP SIGNATURE-----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=XfHp
-----END PGP SIGNATURE-----
Merge tag 'smp-urgent-2020-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull SMP fixes from Thomas Gleixner:
"Two fixes for the SMP related functionality:
- Make the UP version of smp_call_function_single() match SMP
semantics when called for a not available CPU. Instead of emitting
a warning and assuming that the function call target is CPU0,
return a proper error code like the SMP version does.
- Remove a superfluous check in smp_call_function_many_cond()"
* tag 'smp-urgent-2020-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
smp/up: Make smp_call_function_single() match SMP semantics
smp: Remove superfluous cond_func check in smp_call_function_many_cond()
- Kernel fixes:
- Install cgroup events to the correct CPU context to prevent a
potential list double add
- Prevent am intgeer underflow in the perf mlock acounting
- Add a missing prototyp for arch_perf_update_userpage()
- Tooling:
- Add a missing unlock in the error path of maps__insert() in perf maps.
- Fix the build with the latest libbfd
- Fix the perf parser so it does not delete parse event terms, which
caused a regression for using perf with the ARM CoreSight as the sink
confuguration was missing due to the deletion.
- Fix the double free in the perf CPU map merging test case
- Add the missing ustring support for the perf probe command
-----BEGIN PGP SIGNATURE-----
iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAl5AC0ITHHRnbHhAbGlu
dXRyb25peC5kZQAKCRCmGPVMDXSYoaJtD/4jEdN6KNGVJIQ5jOYdchXK/zb68plS
3By6CegbaNq1SU5UPIdMX4BkznVGaVtJU/0hWuvD/ycpBTAMgKjwalYJtAC+anVi
JhG7NiPRV1Nhm+7eZ/78mUpW4CUimTlvZVzU/yneYdFm2klvcxUHblJYSqEGp0AS
r2aZRsqQnWSoI/+z+0THO8tI+HLSpkmKy2slLxaZphI0VjSrjWPDHfF6eAOyl/dq
lTCz+tjd6EytELL+lhWFsGXYAi6HPKP3T4yPRH+eDYKQmByYaEYbK3E8wg/0XB/J
2AHgSBf9pSPDBIkLOWOidmkmWgZD9ykCTyOPu4N0S70+NeaCm2nXLTOQ7dnyLE7t
WCx8mvnIS2hshNUoXMkarG5LYexPupDMMEfHyUT5+T2rKxacKWLaRoIV+JCsUpQb
m6eU3+n/YsN1C05V75Fuztt4irGhltlQxcG8F3gH/vqSy6VDdZb8lMU6+iyE2VKG
ezsI7AMQkT6LrTGa2hXHHnnluaxHHSA32GPe4W1QTwMCMWMtRTwQHBBLoJ4mC0wk
iujB9DVuh7ljmr7QSG9ZYV91eplpzJDUC54P6Qs/p7ouG4YzkIO6glt6BOgBmbp7
YkrJtGpV6npjJmLckktcSd9rtnCzot6yGxeaIVfLPhhtf2KECSCckCyddwkakt0A
wwVVBe8RNxXf2A==
=xu7D
-----END PGP SIGNATURE-----
Merge tag 'perf-urgent-2020-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Thomas Gleixner:
"A set of fixes and improvements for the perf subsystem:
Kernel fixes:
- Install cgroup events to the correct CPU context to prevent a
potential list double add
- Prevent an integer underflow in the perf mlock accounting
- Add a missing prototype for arch_perf_update_userpage()
Tooling:
- Add a missing unlock in the error path of maps__insert() in perf
maps.
- Fix the build with the latest libbfd
- Fix the perf parser so it does not delete parse event terms, which
caused a regression for using perf with the ARM CoreSight as the
sink configuration was missing due to the deletion.
- Fix the double free in the perf CPU map merging test case
- Add the missing ustring support for the perf probe command"
* tag 'perf-urgent-2020-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf maps: Add missing unlock to maps__insert() error case
perf probe: Add ustring support for perf probe command
perf: Make perf able to build with latest libbfd
perf test: Fix test case Merge cpu map
perf parse: Copy string to perf_evsel_config_term
perf parse: Refactor 'struct perf_evsel_config_term'
kernel/events: Add a missing prototype for arch_perf_update_userpage()
perf/cgroups: Install cgroup events to correct cpuctx
perf/core: Fix mlock accounting in perf_mmap()
- Handle a subtle race between the clocksource watchdog and a concurrent
clocksource watchdog stop/start sequence correctly to prevent a timer
double add bug.
- Fix the file path for the core time namespace file.
-----BEGIN PGP SIGNATURE-----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=0zFj
-----END PGP SIGNATURE-----
Merge tag 'timers-urgent-2020-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixes from Thomas Gleixner:
"Two small fixes for the time(r) subsystem:
- Handle a subtle race between the clocksource watchdog and a
concurrent clocksource watchdog stop/start sequence correctly to
prevent a timer double add bug.
- Fix the file path for the core time namespace file"
* tag 'timers-urgent-2020-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
clocksource: Prevent double add_timer_on() for watchdog_timer
MAINTAINERS: Correct path to time namespace source file
- Provision only ACPI enabled redistributors on GICv3
- Use the proper command colums when building the INVALL command for the
GICv3-ITS
- Ensure the allocation of the L2 vPE table for GICv4.1
- Correct the GICv4.1 VPROBASER programming so it uses the proper size
- A set of small GICv4.1 tidy up patches
- Configuration cleanup for C-SKY interrupt chip
- Clarify the function documentation for irq_set_wake() to document that
the wakeup functionality is orthogonal to the irq disable/enable
mechanism.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAl5ACB4THHRnbHhAbGlu
dXRyb25peC5kZQAKCRCmGPVMDXSYodrNEAC22Nu3gGHKE/AUPZP8q53wl5axVZ4M
reM3Wnw7LcUqmXHApbG/kJMbkGkN8sQhieyuTY2UBea+K06nox6aulBjLZ2U6UGE
/5vFD+qB8a8AvSjyVGi0BU04h4RXJEZ9MxM34VDBiabQ74yiEIQvEYhyGVrMVRoM
HC2UP2Y3SgYbBzRPL/sXUjNtPB6QAxABm41PK/2b7y36eULHv3LszqrEcNyuJ7qm
2wEppOmB8+4j6d12zxOJh2hE4RLvNwKgWpcbEofVsI0FdCTcJ/0wVhdTPJmzLz2m
kNFhLQ6qEhCj3ca0tF3sPwl+g0lHKVBtWMkIjKbC4N8g7pBvzj46Ys0/umuTnY9T
pQvJ+N7Jcnbm2IkxYL707X8GewJjcGdYqVklXOJDyfCKm9G1h2lrCQmEjJaVHGVi
f5eQVg401ndqu3L4sSctQM9Qwd3RnVZwanwbPBSD4sbTRdQseRTezIM61bvzvppF
mIwflkfHB/CsrszfFrXHDy22GnsrpR+TTJWgPFahczZCAIxvdv8s+lsMpkZ1oXfg
21cT0Bpj9JT6MIU9K7nalWmAO2Ylb0qDofLNlD1tb9pLWQDSHdR/hEm9o+4Msa/6
/cvrVLVwwM1P0hU1lI7VRKlbsZ0sYWLY1uro05lvckt4QO9WFAZsafnmAVOzN/g5
l7voNi/F8sww2Q==
=a9t/
-----END PGP SIGNATURE-----
Merge tag 'irq-urgent-2020-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull interrupt fixes from Thomas Gleixner:
"A set of fixes for the interrupt subsystem:
- Provision only ACPI enabled redistributors on GICv3
- Use the proper command colums when building the INVALL command for
the GICv3-ITS
- Ensure the allocation of the L2 vPE table for GICv4.1
- Correct the GICv4.1 VPROBASER programming so it uses the proper
size
- A set of small GICv4.1 tidy up patches
- Configuration cleanup for C-SKY interrupt chip
- Clarify the function documentation for irq_set_wake() to document
that the wakeup functionality is orthogonal to the irq
disable/enable mechanism"
* tag 'irq-urgent-2020-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/gic-v3-its: Rename VPENDBASER/VPROPBASER accessors
irqchip/gic-v3-its: Remove superfluous WARN_ON
irqchip/gic-v4.1: Drop 'tmp' in inherit_vpe_l1_table_from_rd()
irqchip/gic-v4.1: Ensure L2 vPE table is allocated at RD level
irqchip/gic-v4.1: Set vpe_l1_base for all redistributors
irqchip/gic-v4.1: Fix programming of GICR_VPROPBASER_4_1_SIZE
genirq: Clarify that irq wake state is orthogonal to enable/disable
irqchip/gic-v3-its: Reference to its_invall_cmd descriptor when building INVALL
irqchip: Some Kconfig cleanup for C-SKY
irqchip/gic-v3: Only provision redistributors that are enabled in ACPI
Pull networking fixes from David Miller:
1) Unbalanced locking in mwifiex_process_country_ie, from Brian Norris.
2) Fix thermal zone registration in iwlwifi, from Andrei
Otcheretianski.
3) Fix double free_irq in sgi ioc3 eth, from Thomas Bogendoerfer.
4) Use after free in mptcp, from Florian Westphal.
5) Use after free in wireguard's root_remove_peer_lists, from Eric
Dumazet.
6) Properly access packets heads in bonding alb code, from Eric
Dumazet.
7) Fix data race in skb_queue_len(), from Qian Cai.
8) Fix regression in r8169 on some chips, from Heiner Kallweit.
9) Fix XDP program ref counting in hv_netvsc, from Haiyang Zhang.
10) Certain kinds of set link netlink operations can cause a NULL deref
in the ipv6 addrconf code. Fix from Eric Dumazet.
11) Don't cancel uninitialized work queue in drop monitor, from Ido
Schimmel.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (84 commits)
net: thunderx: use proper interface type for RGMII
mt76: mt7615: fix max_nss in mt7615_eeprom_parse_hw_cap
bpf: Improve bucket_log calculation logic
selftests/bpf: Test freeing sockmap/sockhash with a socket in it
bpf, sockhash: Synchronize_rcu before free'ing map
bpf, sockmap: Don't sleep while holding RCU lock on tear-down
bpftool: Don't crash on missing xlated program instructions
bpf, sockmap: Check update requirements after locking
drop_monitor: Do not cancel uninitialized work item
mlxsw: spectrum_dpipe: Add missing error path
mlxsw: core: Add validation of hardware device types for MGPIR register
mlxsw: spectrum_router: Clear offload indication from IPv6 nexthops on abort
selftests: mlxsw: Add test cases for local table route replacement
mlxsw: spectrum_router: Prevent incorrect replacement of local table routes
net: dsa: microchip: enable module autoprobe
ipv6/addrconf: fix potential NULL deref in inet6_set_link_af()
dpaa_eth: support all modes with rate adapting PHYs
net: stmmac: update pci platform data to use phy_interface
net: stmmac: xgmac: fix missing IFF_MULTICAST checki in dwxgmac2_set_filter
net: stmmac: fix missing IFF_MULTICAST check in dwmac4_set_filter
...
Pull vfs file system parameter updates from Al Viro:
"Saner fs_parser.c guts and data structures. The system-wide registry
of syntax types (string/enum/int32/oct32/.../etc.) is gone and so is
the horror switch() in fs_parse() that would have to grow another case
every time something got added to that system-wide registry.
New syntax types can be added by filesystems easily now, and their
namespace is that of functions - not of system-wide enum members. IOW,
they can be shared or kept private and if some turn out to be widely
useful, we can make them common library helpers, etc., without having
to do anything whatsoever to fs_parse() itself.
And we already get that kind of requests - the thing that finally
pushed me into doing that was "oh, and let's add one for timeouts -
things like 15s or 2h". If some filesystem really wants that, let them
do it. Without somebody having to play gatekeeper for the variants
blessed by direct support in fs_parse(), TYVM.
Quite a bit of boilerplate is gone. And IMO the data structures make a
lot more sense now. -200LoC, while we are at it"
* 'merge.nfs-fs_parse.1' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (25 commits)
tmpfs: switch to use of invalfc()
cgroup1: switch to use of errorfc() et.al.
procfs: switch to use of invalfc()
hugetlbfs: switch to use of invalfc()
cramfs: switch to use of errofc() et.al.
gfs2: switch to use of errorfc() et.al.
fuse: switch to use errorfc() et.al.
ceph: use errorfc() and friends instead of spelling the prefix out
prefix-handling analogues of errorf() and friends
turn fs_param_is_... into functions
fs_parse: handle optional arguments sanely
fs_parse: fold fs_parameter_desc/fs_parameter_spec
fs_parser: remove fs_parameter_description name field
add prefix to fs_context->log
ceph_parse_param(), ceph_parse_mon_ips(): switch to passing fc_log
new primitive: __fs_parse()
switch rbd and libceph to p_log-based primitives
struct p_log, variants of warnf() et.al. taking that one instead
teach logfc() to handle prefices, give it saner calling conventions
get rid of cg_invalf()
...
Daniel Borkmann says:
====================
pull-request: bpf 2020-02-07
The following pull-request contains BPF updates for your *net* tree.
We've added 15 non-merge commits during the last 10 day(s) which contain
a total of 12 files changed, 114 insertions(+), 31 deletions(-).
The main changes are:
1) Various BPF sockmap fixes related to RCU handling in the map's tear-
down code, from Jakub Sitnicki.
2) Fix macro state explosion in BPF sk_storage map when calculating its
bucket_log on allocation, from Martin KaFai Lau.
3) Fix potential BPF sockmap update race by rechecking socket's established
state under lock, from Lorenz Bauer.
4) Fix crash in bpftool on missing xlated instructions when kptr_restrict
sysctl is set, from Toke Høiland-Jørgensen.
5) Fix i40e's XSK wakeup code to return proper error in busy state and
various misc fixes in xdpsock BPF sample code, from Maciej Fijalkowski.
6) Fix the way modifiers are skipped in BTF in the verifier while walking
pointers to avoid program rejection, from Alexei Starovoitov.
7) Fix Makefile for runqslower BPF tool to i) rebuild on libbpf changes and
ii) to fix undefined reference linker errors for older gcc version due to
order of passed gcc parameters, from Yulia Kartseva and Song Liu.
8) Fix a trampoline_count BPF kselftest warning about missing braces around
initializer, from Andrii Nakryiko.
9) Fix up redundant "HAVE" prefix from large INSN limit kernel probe in
bpftool, from Michal Rostecki.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
There's some confusion around if an irq that's disabled with disable_irq()
can still wake the system from sleep states such as "suspend to RAM".
Clarify this in the kernel documentation for irq_set_irq_wake() so that
it's clear that an irq can be disabled and still wake the system if it has
been marked for wakeup.
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lkml.kernel.org/r/20200206191521.94559-1-swboyd@chromium.org
Unused now.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
In CONFIG_SMP=y kernels, smp_call_function_single() returns -ENXIO when
invoked for a non-existent CPU. In contrast, in CONFIG_SMP=n kernels,
a splat is emitted and smp_call_function_single() otherwise silently
ignores its "cpu" argument, instead pretending that the caller intended
to have something happen on CPU 0. Given that there is now code that
expects smp_call_function_single() to return an error if a bad CPU was
specified, this difference in semantics needs to be addressed.
Bring the semantics of the CONFIG_SMP=n version of
smp_call_function_single() into alignment with its CONFIG_SMP=y
counterpart.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20200205143409.GA7021@paulmck-ThinkPad-P72
One of the simplifications added for 5.6-rc1 has caused build
regressions on some platforms (it was reported for sparc64).
This pull request fixes it with a direct revert.
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
-----BEGIN PGP SIGNATURE-----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=Pb+W
-----END PGP SIGNATURE-----
Merge tag 'kgdb-fixes-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux
Pull kgdb fix from Daniel Thompson:
"One of the simplifications added for 5.6-rc1 has caused build
regressions on some platforms (it was reported for sparc64).
This fixes it with a revert"
* tag 'kgdb-fixes-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux:
Revert "kdb: Get rid of confusing diag msg from "rd" if current task has no regs"
This reverts commit bbfceba15f.
When DBG_MAX_REG_NUM is zero then a number of symbols are conditionally
defined. It is therefore not possible to check it using C expressions.
Reported-by: Anatoly Pugachev <matorola@gmail.com>
Acked-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
- Added new "bootconfig".
Looks for a file appended to initrd to add boot config options.
This has been discussed thoroughly at Linux Plumbers.
Very useful for adding kprobes at bootup.
Only enabled if "bootconfig" is on the real kernel command line.
- Created dynamic event creation.
Merges common code between creating synthetic events and
kprobe events.
- Rename perf "ring_buffer" structure to "perf_buffer"
- Rename ftrace "ring_buffer" structure to "trace_buffer"
Had to rename existing "trace_buffer" to "array_buffer"
- Allow trace_printk() to work withing (some) tracing code.
- Sort of tracing configs to be a little better organized
- Fixed bug where ftrace_graph hash was not being protected properly
- Various other small fixes and clean ups
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCXjtAURQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qshOAQDzopQmvAVrrI6oogghr8JQA30Z2yqT
i+Ld7vPWL2MV9wEA1S+zLGDSYrj8f/vsCq6BxRYT1ApO+YtmY6LTXiUejwg=
=WNds
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
- Added new "bootconfig".
This looks for a file appended to initrd to add boot config options,
and has been discussed thoroughly at Linux Plumbers.
Very useful for adding kprobes at bootup.
Only enabled if "bootconfig" is on the real kernel command line.
- Created dynamic event creation.
Merges common code between creating synthetic events and kprobe
events.
- Rename perf "ring_buffer" structure to "perf_buffer"
- Rename ftrace "ring_buffer" structure to "trace_buffer"
Had to rename existing "trace_buffer" to "array_buffer"
- Allow trace_printk() to work withing (some) tracing code.
- Sort of tracing configs to be a little better organized
- Fixed bug where ftrace_graph hash was not being protected properly
- Various other small fixes and clean ups
* tag 'trace-v5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (88 commits)
bootconfig: Show the number of nodes on boot message
tools/bootconfig: Show the number of bootconfig nodes
bootconfig: Add more parse error messages
bootconfig: Use bootconfig instead of boot config
ftrace: Protect ftrace_graph_hash with ftrace_sync
ftrace: Add comment to why rcu_dereference_sched() is open coded
tracing: Annotate ftrace_graph_notrace_hash pointer with __rcu
tracing: Annotate ftrace_graph_hash pointer with __rcu
bootconfig: Only load bootconfig if "bootconfig" is on the kernel cmdline
tracing: Use seq_buf for building dynevent_cmd string
tracing: Remove useless code in dynevent_arg_pair_add()
tracing: Remove check_arg() callbacks from dynevent args
tracing: Consolidate some synth_event_trace code
tracing: Fix now invalid var_ref_vals assumption in trace action
tracing: Change trace_boot to use synth_event interface
tracing: Move tracing selftests to bottom of menu
tracing: Move mmio tracer config up with the other tracers
tracing: Move tracing test module configs together
tracing: Move all function tracing configs together
tracing: Documentation for in-kernel synthetic event API
...
As function_graph tracer can run when RCU is not "watching", it can not be
protected by synchronize_rcu() it requires running a task on each CPU before
it can be freed. Calling schedule_on_each_cpu(ftrace_sync) needs to be used.
Link: https://lore.kernel.org/r/20200205131110.GT2935@paulmck-ThinkPad-P72
Cc: stable@vger.kernel.org
Fixes: b9b0c831be ("ftrace: Convert graph filter to use hash tables")
Reported-by: "Paul E. McKenney" <paulmck@kernel.org>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Because the function graph tracer can execute in sections where RCU is not
"watching", the rcu_dereference_sched() for the has needs to be open coded.
This is fine because the RCU "flavor" of the ftrace hash is protected by
its own RCU handling (it does its own little synchronization on every CPU
and does not rely on RCU sched).
Acked-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Fix following instances of sparse error
kernel/trace/ftrace.c:5667:29: error: incompatible types in comparison
kernel/trace/ftrace.c:5813:21: error: incompatible types in comparison
kernel/trace/ftrace.c:5868:36: error: incompatible types in comparison
kernel/trace/ftrace.c:5870:25: error: incompatible types in comparison
Use rcu_dereference_protected to dereference the newly annotated pointer.
Link: http://lkml.kernel.org/r/20200205055701.30195-1-frextrite@gmail.com
Signed-off-by: Amol Grover <frextrite@gmail.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Fix following instances of sparse error
kernel/trace/ftrace.c:5664:29: error: incompatible types in comparison
kernel/trace/ftrace.c:5785:21: error: incompatible types in comparison
kernel/trace/ftrace.c:5864:36: error: incompatible types in comparison
kernel/trace/ftrace.c:5866:25: error: incompatible types in comparison
Use rcu_dereference_protected to access the __rcu annotated pointer.
Link: http://lkml.kernel.org/r/20200201072703.17330-1-frextrite@gmail.com
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Amol Grover <frextrite@gmail.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Pull vfs recursive removal updates from Al Viro:
"We have quite a few places where synthetic filesystems do an
equivalent of 'rm -rf', with varying amounts of code duplication,
wrong locking, etc. That really ought to be a library helper.
Only debugfs (and very similar tracefs) are converted here - I have
more conversions, but they'd never been in -next, so they'll have to
wait"
* 'work.recursive_removal' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
simple_recursive_removal(): kernel-side rm -rf for ramfs-style filesystems
kallsyms_token_table[] only contains ASCII characters. It should be
char instead of u8.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Fix the way modifiers are skipped while walking pointers. Otherwise second
level dereferences of 'const struct foo *' will be rejected by the verifier.
Fixes: 9e15db6613 ("bpf: Implement accurate raw_tp context access via BTF")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200201000314.261392-1-ast@kernel.org
Everything for kgdb this time around is either simplifications or clean
ups.
In particular Douglas Anderson's modifications to the backtrace machine
in the *last* dev cycle have enabled Doug to tidy up some MIPS specific
backtrace code and stop sharing certain data structures across the
kernel. Note that The MIPS folks were on Cc: for the MIPS patch and
reacted positively (but without an explicit Acked-by).
Doug also got rid of the implicit switching between tasks and register
sets during some but not of kdb's backtrace actions (because the
implicit switching was either confusing for users, pointless or both).
Finally there is a coverity fix and patch to replace open coded console
traversal with the proper helper function.
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
-----BEGIN PGP SIGNATURE-----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=igIA
-----END PGP SIGNATURE-----
Merge tag 'kgdb-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux
Pull kgdb updates from Daniel Thompson:
"Everything for kgdb this time around is either simplifications or
clean ups.
In particular Douglas Anderson's modifications to the backtrace
machine in the *last* dev cycle have enabled Doug to tidy up some MIPS
specific backtrace code and stop sharing certain data structures
across the kernel. Note that The MIPS folks were on Cc: for the MIPS
patch and reacted positively (but without an explicit Acked-by).
Doug also got rid of the implicit switching between tasks and register
sets during some but not of kdb's backtrace actions (because the
implicit switching was either confusing for users, pointless or both).
Finally there is a coverity fix and patch to replace open coded
console traversal with the proper helper function"
* tag 'kgdb-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux:
kdb: Use for_each_console() helper
kdb: remove redundant assignment to pointer bp
kdb: Get rid of confusing diag msg from "rd" if current task has no regs
kdb: Gid rid of implicit setting of the current task / regs
kdb: kdb_current_task shouldn't be exported
kdb: kdb_current_regs should be private
MIPS: kdb: Remove old workaround for backtracing on other CPUs
The dynevent_cmd commands that build up the command string don't need
to do that themselves - there's a seq_buf facility that does pretty
much the same thing those command are doing manually, so use it
instead.
Link: http://lkml.kernel.org/r/eb8a6e835c964d0ab8a38cbf5ffa60746b54a465.1580506712.git.zanussi@kernel.org
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
It's kind of strange to have check_arg() callbacks as part of the arg
objects themselves; it makes more sense to just pass these in when the
args are added instead.
Remove the check_arg() callbacks from those objects which also means
removing the check_arg() args from the init functions, adding them to
the add functions and fixing up existing callers.
Link: http://lkml.kernel.org/r/c7708d6f177fcbe1a36b6e4e8e150907df0fa5d2.1580506712.git.zanussi@kernel.org
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
