The hostport data structure is shared between the association, this why
we keep track of the users via a refcount. So we should not decrement
the refcount on a match and free the hostport several times.
Reported by KASAN.
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Neither struct nvmet_fc_tgt_queue nor struct nvmet_fc_tgt_assoc are data
structure which are used in a RCU context. So there is no reason to
delay the free operation.
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
When the target executes a disconnect and the host triggers a reconnect
immediately, the reconnect command still finds an existing association.
The reconnect crashes later on because nvmet_fc_delete_target_assoc
blindly removes resources while the reconnect code wants to use it.
To address this, nvmet_fc_find_target_assoc should not be able to
lookup an association which is being removed. The association list
is already under RCU lifetime management, so let's properly use it
and remove the association from the list and wait for a grace period
before cleaning up all. This means we also can drop the RCU management
on the queues, because this is now handled via the association itself.
A second step split the execution context so that the initial disconnect
command can complete without running the reconnect code in the same
context. As usual, this is done by deferring the ->done to a workqueue.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
In case we return early out of __nvmet_fc_finish_ls_req() we still have
to release the reference on the target port.
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
The first argument of list_add_tail function is the new element which
should be added to the list which is the second argument. Swap the
arguments to allow processing more than one element at a time.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
The module exit path has race between deleting all controllers and
freeing 'left over IDs'. To prevent double free a synchronization
between nvme_delete_ctrl and ida_destroy has been added by the initial
commit.
There is some logic around trying to prevent from hanging forever in
wait_for_completion, though it does not handling all cases. E.g.
blktests is able to reproduce the situation where the module unload
hangs forever.
If we completely rely on the cleanup code executed from the
nvme_delete_ctrl path, all IDs will be freed eventually. This makes
calling ida_destroy unnecessary. We only have to ensure that all
nvme_delete_ctrl code has been executed before we leave
nvme_fc_exit_module. This is done by flushing the nvme_delete_wq
workqueue.
While at it, remove the unused nvme_fc_wq workqueue too.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
The eventfs inode had pointers to dentries (and child dentries) without
actually holding a refcount on said pointer. That is fundamentally
broken, and while eventfs tried to then maintain coherence with dentries
going away by hooking into the '.d_iput' callback, that doesn't actually
work since it's not ordered wrt lookups.
There were two reasonms why eventfs tried to keep a pointer to a dentry:
- the creation of a 'events' directory would actually have a stable
dentry pointer that it created with tracefs_start_creating().
And it needed that dentry when tearing it all down again in
eventfs_remove_events_dir().
This use is actually ok, because the special top-level events
directory dentries are actually stable, not just a temporary cache of
the eventfs data structures.
- the 'eventfs_inode' (aka ei) needs to stay around as long as there
are dentries that refer to it.
It then used these dentry pointers as a replacement for doing
reference counting: it would try to make sure that there was only
ever one dentry associated with an event_inode, and keep a child
dentry array around to see which dentries might still refer to the
parent ei.
This gets rid of the invalid dentry pointer use, and renames the one
valid case to a different name to make it clear that it's not just any
random dentry.
The magic child dentry array that is kind of a "reverse reference list"
is simply replaced by having child dentries take a ref to the ei. As
does the directory dentries. That makes the broken use case go away.
Link: https://lore.kernel.org/linux-trace-kernel/202401291043.e62e89dc-oliver.sang@intel.com/
Link: https://lore.kernel.org/linux-trace-kernel/20240131185513.280463000@goodmis.org
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Ajay Kaher <ajay.kaher@broadcom.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes: c1504e5102 ("eventfs: Implement eventfs dir creation functions")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
In order for the dentries to stay up-to-date with the eventfs changes,
just add a 'd_revalidate' function that checks the 'is_freed' bit.
Also, clean up the dentry release to actually use d_release() rather
than the slightly odd d_iput() function. We don't care about the inode,
all we want to do is to get rid of the refcount to the eventfs data
added by dentry->d_fsdata.
It would probably be cleaner to make eventfs its own filesystem, or at
least set its own dentry ops when looking up eventfs files. But as it
is, only eventfs dentries use d_fsdata, so we don't really need to split
these things up by use.
Another thing that might be worth doing is to make all eventfs lookups
mark their dentries as not worth caching. We could do that with
d_delete(), but the DCACHE_DONTCACHE flag would likely be even better.
As it is, the dentries are all freeable, but they only tend to get freed
at memory pressure rather than more proactively. But that's a separate
issue.
Link: https://lore.kernel.org/linux-trace-kernel/202401291043.e62e89dc-oliver.sang@intel.com/
Link: https://lore.kernel.org/linux-trace-kernel/20240131185513.124644253@goodmis.org
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Ajay Kaher <ajay.kaher@broadcom.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes: c1504e5102 ("eventfs: Implement eventfs dir creation functions")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The dentry lookup for eventfs files was very broken, and had lots of
signs of the old situation where the filesystem names were all created
statically in the dentry tree, rather than being looked up dynamically
based on the eventfs data structures.
You could see it in the naming - how it claimed to "create" dentries
rather than just look up the dentries that were given it.
You could see it in various nonsensical and very incorrect operations,
like using "simple_lookup()" on the dentries that were passed in, which
only results in those dentries becoming negative dentries. Which meant
that any other lookup would possibly return ENOENT if it saw that
negative dentry before the data was then later filled in.
You could see it in the immense amount of nonsensical code that didn't
actually just do lookups.
Link: https://lore.kernel.org/linux-trace-kernel/202401291043.e62e89dc-oliver.sang@intel.com/
Link: https://lore.kernel.org/linux-trace-kernel/20240131233227.73db55e1@gandalf.local.home
Cc: stable@vger.kernel.org
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Ajay Kaher <ajay.kaher@broadcom.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Fixes: c1504e5102 ("eventfs: Implement eventfs dir creation functions")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
For devices with multiple clock sources connected to a selector, we need
to check what a clock selector control request has returned. This is
needed to ensure that a requested clock source is indeed selected and for
autoclock feature to work.
For devices with single clock source connected, if we get an error there
is nothing else we can do about it. We can't skip clock selector setup as
it is required by some devices. So lets just ignore error in this case.
This should fix various buggy Mackie devices:
[ 649.109785] usb 1-1.3: parse_audio_format_rates_v2v3(): unable to find clock source (clock -32)
[ 649.111946] usb 1-1.3: parse_audio_format_rates_v2v3(): unable to find clock source (clock -32)
[ 649.113822] usb 1-1.3: parse_audio_format_rates_v2v3(): unable to find clock source (clock -32)
There is also interesting info from the Windows documentation [1] (this
is probably why manufacturers dont't even test this feature):
"The USB Audio 2.0 driver doesn't support clock selection. The driver
uses the Clock Source Entity, which is selected by default and never
issues a Clock Selector Control SET CUR request."
Link: https://learn.microsoft.com/en-us/windows-hardware/drivers/audio/usb-2-0-audio-drivers [1]
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217314
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218175
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218342
Signed-off-by: Alexander Tsoy <alexander@tsoy.me>
Link: https://lore.kernel.org/r/20240201115308.17838-1-alexander@tsoy.me
Signed-off-by: Takashi Iwai <tiwai@suse.de>
XDP queues are created/destroyed when a XDP program
is attached/detached. In current driver xdp_queues are not
getting destroyed on program exit due to incorrect xdp_queue
and tot_tx_queue count values.
This patch fixes the issue by setting tot_tx_queue and xdp_queue
count to correct values. It also fixes xdp.data_hard_start address.
Fixes: 06059a1a9a ("octeontx2-pf: Add XDP support to netdev PF")
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Link: https://lore.kernel.org/r/20240130120610.16673-1-gakula@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Use existing inline function for IP version check.
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
If we use IORING_OP_RECV with provided buffers and pass in '0' as the
length of the request, the length is retrieved from the selected buffer.
If MSG_WAITALL is also set and we get a short receive, then we may hit
the retry path which decrements sr->len and increments the buffer for
a retry. However, the length is still zero at this point, which means
that sr->len now becomes huge and import_ubuf() will cap it to
MAX_RW_COUNT and subsequently return -EFAULT for the range as a whole.
Fix this by always assigning sr->len once the buffer has been selected.
Cc: stable@vger.kernel.org
Fixes: 7ba89d2af1 ("io_uring: ensure recv and recvmsg handle MSG_WAITALL correctly")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Vaio VJFE-ADL is equipped with ALC269VC, and it needs
ALC298_FIXUP_SPK_VOLUME quirk to make its headset mic work.
Signed-off-by: Edson Juliano Drosdeck <edson.drosdeck@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20240201122114.30080-1-edson.drosdeck@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Remove an unused stub function that calls a non-existant function.
This function was accidentally added as part of commit
2144833e7b ("ALSA: hda: cirrus_scodec: Add KUnit test"). It was
a relic of an earlier version of the test that should have been
removed.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 2144833e7b ("ALSA: hda: cirrus_scodec: Add KUnit test")
Link: https://msgid.link/r/20240129162737.497-19-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Check whether the firmware is already patched. If so, include the
firmware version in the firmware file name.
If the firmware has already been patched by the BIOS the driver
can only replace it if it has control of hard RESET.
If the driver cannot replace the firmware, it can still load a wmfw
(for ALSA control definitions) and/or a bin (for additional tunings).
But these must match the version of firmware that is running on the
CS35L56.
The firmware is pre-patched if either:
- FIRMWARE_MISSING == 0, or
- it is a secured CS35L56 (which implies that is was already patched),
cs35l56_hw_init() will set preloaded_fw_ver to the (non-zero)
firmware version if either of these conditions is true.
Normal (unpatched or replaceable firmware):
cs35l56-rev-dsp1-misc[-system_name].[wmfw|bin]
Preloaded firmware:
cs35l56-rev[-s]-VVVVVV-dsp1-misc[-system_name].[wmfw|bin]
Where:
[-s] is an optional -s added into the name for a secured CS35L56
VVVVVV is the 24-bit firmware version in hexadecimal.
Backport note:
This won't apply to kernel versions older than v6.6.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 73cfbfa9ca ("ALSA: hda/cs35l56: Add driver for Cirrus Logic CS35L56 amplifier")
Link: https://msgid.link/r/20240129162737.497-18-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Change the filename field layout to:
cs35l56-rev[-s]-dsp1-misc[-sub].[wmfw|bin]
This is to keep the same firmware file naming scheme as the
CS35L56 ASoC driver.
This is not a compatibility break because no firmware files have
been published.
The original field layout matched the ASoC driver, but the way the
ASoC driver used the wm_adsp driver config to form this filename
was bugged. Fixing the ASoC driver to use the correct wm_adsp config
strings means that the 's' flag (to indicate a secured part) has to
move to somewhere after the first '-'.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 73cfbfa9ca ("ALSA: hda/cs35l56: Add driver for Cirrus Logic CS35L56 amplifier")
Link: https://msgid.link/r/20240129162737.497-17-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Check for the cases of system-specific bin file without a
wmfw before falling back to looking for a generic wmfw.
All system-specific options should be tried before falling
back to loading a generic wmfw/bin. With the original code,
the presence of a fallback generic wmfw on the filesystem
would prevent using a system-specific tuning with a ROM
firmware.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 73cfbfa9ca ("ALSA: hda/cs35l56: Add driver for Cirrus Logic CS35L56 amplifier")
Link: https://msgid.link/r/20240129162737.497-16-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The original 50ms timeout for firmware boot is not long enough for
worst-case time to reboot after a firmware download. Increase the
timeout to 250ms.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: e496112529 ("ASoC: cs35l56: Add driver for Cirrus Logic CS35L56")
Link: https://msgid.link/r/20240129162737.497-15-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If the "spk-id-gpios" property is present it points to GPIOs whose
value must be used to select the correct bin file to match the
speakers.
Some manufacturers use multiple sources of speakers, which need
different tunings for best performance. On these models the type of
speaker fitted is indicated by the values of one or more GPIOs. The
number formed by the GPIOs identifies the tuning required.
The speaker ID must be used in combination with the subsystem ID
(either from PCI SSID or cirrus,firmware-uid property), because the
GPIOs can only indicate variants of a specific model.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 1a1c3d794e ("ASoC: cs35l56: Use PCI SSID as the firmware UID")
Link: https://msgid.link/r/20240129162737.497-14-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Check during initialization whether the firmware is already patched.
If so, include the firmware version in the wm_adsp fwf_name string.
If the firmware has already been patched by the BIOS the driver
can only replace it if it has control of hard RESET.
If the driver cannot replace the firmware, it can still load a wmfw
(for ALSA control definitions) and/or a bin (for additional tunings).
But these must match the version of firmware that is running on the
CS35L56.
The firmware is pre-patched if FIRMWARE_MISSING == 0.
Including the firmware version in the fwf_name string will
qualify the firmware file name:
Normal (unpatched or replaceable firmware):
cs35l56-rev-dsp1-misc[-system_name].[wmfw|bin]
Preloaded firmware:
cs35l56-rev[-s]-VVVVVV-dsp1-misc[-system_name].[wmfw|bin]
Where:
[-s] is an optional -s added into the name for a secured CS35L56
VVVVVV is the 24-bit firmware version in hexadecimal.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 608f1b0dbd ("ASoC: cs35l56: Move DSP part string generation so that it is done only once")
Link: https://msgid.link/r/20240129162737.497-13-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Put the silicon revision and secured flag in the wm_adsp fwf_name
string instead of including them in the part string.
This changes the format of the firmware name string from
cs35l56[s]-rev-misc[-system_name]
to
cs35l56-rev[-s]-misc[-system_name]
No firmware files have been published, so this doesn't cause a
compatibility break.
Silicon revision and secured flag are included in the firmware
filename to pick a firmware compatible with the part. These strings
were being added to the part string, but that is a misuse of the
string. The correct place for these is the fwf_name string, which
is specifically intended to select between multiple firmware files
for the same part.
Backport note:
This won't apply to kernels older than v6.6.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 608f1b0dbd ("ASoC: cs35l56: Move DSP part string generation so that it is done only once")
Link: https://msgid.link/r/20240129162737.497-12-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Defer initializing the state of the ASP1 mixer registers until
the firmware has been downloaded and rebooted.
On a SoundWire system the ASP is free for use as a chip-to-chip
interconnect. This can be either for the firmware on multiple
CS35L56 to share reference audio; or as a bridge to another
device. If it is a firmware interconnect it is owned by the
firmware and the Linux driver should avoid writing the registers.
However, if it is a bridge then Linux may take over and handle
it as a normal codec-to-codec link. Even if the ASP is used
as a firmware-firmware interconnect it is useful to have
ALSA controls for the ASP mixer. They are at least useful for
debugging.
CS35L56 is designed for SDCA and a generic SDCA driver would
know nothing about these chip-specific registers. So if the
ASP is being used on a SoundWire system the firmware sets up the
ASP mixer registers. This means that we can't assume the default
state of these registers. But we don't know the initial state
that the firmware set them to until after the firmware has been
downloaded and booted, which can take several seconds when
downloading multiple amps.
DAPM normally reads the initial state of mux registers during
probe() but this would mean blocking probe() for several seconds
until the firmware has initialized them. To avoid this, the
mixer muxes are set SND_SOC_NOPM to prevent DAPM trying to read
the register state. Custom get/set callbacks are implemented for
ALSA control access, and these can safely block waiting for the
firmware download.
After the firmware download has completed, the state of the
mux registers is known so a work job is queued to call
snd_soc_dapm_mux_update_power() on each of the mux widgets.
Backport note:
This won't apply cleanly to kernels older than v6.6.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: e496112529 ("ASoC: cs35l56: Add driver for Cirrus Logic CS35L56")
Link: https://msgid.link/r/20240129162737.497-11-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add ASP1_FRAME_CONTROL1, ASP1_FRAME_CONTROL5 and the ASP1_TX?_INPUT
registers to the sequence used to initialize the ASP configuration.
Write this sequence to the cache and directly to the registers to
ensure that they match.
A system-specific firmware can patch these registers to values that are
not the silicon default, so that the CS35L56 boots already in the
configuration used by Windows or by "driverless" Windows setups such
as factory tuning.
These may not match how Linux is configuring the HDA codec. And anyway
on Linux the ALSA controls are used to configure routing options.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 73cfbfa9ca ("ALSA: hda/cs35l56: Add driver for Cirrus Logic CS35L56 amplifier")
Link: https://msgid.link/r/20240129162737.497-10-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Patch the SDW TX mixer registers to silicon defaults.
CS35L56 is designed for SDCA and a generic SDCA driver would
know nothing about these chip-specific registers. So the
firmware sets up the SDW TX mixer registers to whatever audio
is relevant on a specific system.
This means that the driver cannot assume the initial values
of these registers. But Linux has ALSA controls to configure
routing, so the registers can be patched to silicon default and
the ALSA controls used to select what audio to feed back to the
host capture path.
Backport note:
This won't apply to kernels older than v6.6.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: e496112529 ("ASoC: cs35l56: Add driver for Cirrus Logic CS35L56")
Link: https://msgid.link/r/20240129162737.497-9-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a dummy SUPPLY widget connected to the ASP that forces the
chip registers to match the regmap cache when the ASP is
powered-up.
On a SoundWire system the ASP is free for use as a chip-to-chip
interconnect. This can be either for the firmware on multiple
CS35L56 to share reference audio; or as a bridge to another
device. If it is a firmware interconnect it is owned by the
firmware and the Linux driver should avoid writing the registers.
However. If it is a bridge then Linux may take over and handle
it as a normal codec-to-codec link.
CS35L56 is designed for SDCA and a generic SDCA driver would
know nothing about these chip-specific registers. So if the
ASP is being used on a SoundWire system the firmware sets up the
ASP registers. This means that we can't assume the default
state of the ASP registers. But we don't know the initial state
that the firmware set them to until after the firmware has been
downloaded and booted, which can take several seconds when
downloading multiple amps.
To avoid blocking probe() for several seconds waiting for the
firmware, the silicon defaults are assumed. This allows the machine
driver to setup the ASP configuration during probe() without being
blocked. If the ASP is hooked up and used, the SUPPLY widget
ensures that the chip registers match what was configured in the
regmap cache.
If the machine driver does not hook up the ASP, it is assumed that
it won't call any functions to configure the ASP DAI. Therefore
the regmap cache will be clean for these registers so a
regcache_sync() will not overwrite the chip registers. If the
DAI is not hooked up, the dummy SUPPLY widget will not be
invoked so it will never force-overwrite the chip registers.
Backport note:
This won't apply cleanly to kernels older than v6.6.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: e496112529 ("ASoC: cs35l56: Add driver for Cirrus Logic CS35L56")
Link: https://msgid.link/r/20240129162737.497-8-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove the check of fw_patched from cs35l56_is_fw_reload_needed().
Also remove the redundant check for control of the reset GPIO.
The fw_patched flag is set when cs35l56_dsp_work() has completed its
steps to download firmware and power-up wm_adsp. There was a check in
cs35l56_is_fw_reload_needed() to make a quick exit of 'false' if
!fw_patched. The original idea was that the system might be suspended
before the driver has ever made any attempt to download firmware, and
in that case the driver doesn't need to return to a patched state
because it was never in a patched state.
This check of fw_patched is buggy because it prevented ever recovering
from a failed patch. If a previous attempt to patch and reboot the
silicon had failed it would leave fw_patched==false. This would mean
the driver never attempted another download even though the fault may
have been cleared (by a hard reset, for example).
It is also a redundant check because the calling code already makes
a quick exit if cs35l56_component_probe() has not been called, which
deals with the original intent of this check but in a safer way.
The check for reset GPIO is redundant: if the silicon was hard-reset
the FIRMWARE_MISSING flag will be 1. But this check created an
expectation that the suspend/resume code toggles reset. This can't
easily be protected against accidental code breakage. The only reason
for the check was to skip runtime-resuming the driver to read the
PROTECTION_STATUS register when it already knows it reset the silicon.
But in that case the driver will have to be runtime-resumed to do
the firmware download. So it created an assumption for no benefit.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 8a731fd37f ("ASoC: cs35l56: Move utility functions to shared file")
Link: https://msgid.link/r/20240129162737.497-7-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Move the call to cs35l56_set_patch() earlier in cs35l56_init() so
that it only adds the register patch on first-time initialization.
The call was after the post_soft_reset label, so every time this
function was run to re-initialize the hardware after a reset it would
call regmap_register_patch() and add the same reg_sequence again.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 898673b905 ("ASoC: cs35l56: Move shared data into a common data structure")
Link: https://msgid.link/r/20240129162737.497-6-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cs35l56_component_remove() must call wm_adsp_power_down() and
wm_adsp2_component_remove().
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: e496112529 ("ASoC: cs35l56: Add driver for Cirrus Logic CS35L56")
Link: https://msgid.link/r/20240129162737.497-5-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The cs35l56->component pointer is used by the suspend-resume handling to
know whether the driver is fully instantiated. This is to prevent it
queuing dsp_work which would result in calling wm_adsp when the driver
is not an instantiated ASoC component. So this pointer must be cleared
by cs35l56_component_remove().
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: e496112529 ("ASoC: cs35l56: Add driver for Cirrus Logic CS35L56")
Link: https://msgid.link/r/20240129162737.497-4-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There's no need to overwrite fwf_name with a kstrdup() of the cs_dsp part
name. It is trivial to select either fwf_name or cs_dsp.part as the string
to use when building the filename in wm_adsp_request_firmware_file().
This leaves fwf_name entirely owned by the codec driver.
It also avoids problems with freeing the pointer. With the original code
fwf_name was either a pointer owned by the codec driver, or a kstrdup()
created by wm_adsp. This meant wm_adsp must free it if it set it, but not
if the codec driver set it. The code was handling this by using
devm_kstrdup().
But there is no absolute requirement that wm_adsp_common_init() must be
called from probe(), so this was a pseudo-memory leak - each new call to
wm_adsp_common_init() would allocate another block of memory but these
would only be freed if the owning codec driver was removed.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://msgid.link/r/20240129162737.497-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Check for the cases of system-specific bin file without a
wmfw before falling back to looking for a generic wmfw.
All system-specific options should be tried before falling
back to loading a generic wmfw/bin. With the original code,
the presence of a fallback generic wmfw on the filesystem
would prevent using a system-specific tuning with a ROM
firmware.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 0e7d82cbea ("ASoC: wm_adsp: Add support for loading bin files without wmfw")
Link: https://msgid.link/r/20240129162737.497-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Quite a lot of fixes that came in since the merge window, a large
portion for for Qualcomm and ES8326.
The 8 DAI support for Qualcomm is just raising a constant to allow for
devies that otherwise only need DTs, and there's a few other device ID
updates for sunxi (Allwinner) and AMD platforms.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmW7kKoACgkQJNaLcl1U
h9CN9gf/fvsZZAB6jejgWCcO16dQfHS4dWMOxYzjUaivRvmHW/RcE7k0BTTGsRIS
4r/74Kzm2P6xsfyV2U43XXSZHcRc4A1pIsSdijNXcBb0vkS3H4cceDB5WEGHXGEB
q5J7exT0HR9OvfdBORry6jgDKbgUUPrRcUbuNxx9bSuPP5CbziPUUOWzZE0oamt5
HIKvh/07IaBNvkEUsaFEIj1ClchjwAALZNR1EGgPxSsOytiqnQP0nBX4kMvP0jmh
E7tckse0QrR+XzKtZL2CnOeo+Kk3CdJxXP1yDqVYhJXt3iHMssBkVO2dHXN2ostK
p+UNOPWlPMNOpS2vV6cNtu905ECW+Q==
=nuZY
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v6.8-rc2' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.8
Quite a lot of fixes that came in since the merge window, a large
portion for for Qualcomm and ES8326.
The 8 DAI support for Qualcomm is just raising a constant to allow for
devies that otherwise only need DTs, and there's a few other device ID
updates for sunxi (Allwinner) and AMD platforms.
The ops->default_domain flow used a 0 req_type to select the default
domain and this was enforced by iommu_group_alloc_default_domain().
When !CONFIG_IOMMU_DMA started forcing the old ARM32 drivers into IDENTITY
it also overroad the 0 req_type of the ops->default_domain drivers to
IDENTITY which ends up causing failures during device probe.
Make iommu_group_alloc_default_domain() accept a req_type that matches the
ops->default_domain and have iommu_group_alloc_default_domain() generate a
req_type that matches the default_domain.
This way the req_type always describes what kind of domain should be
attached and ops->default_domain overrides all other mechanisms to choose
the default domain.
Fixes: 2ad56efa80 ("powerpc/iommu: Setup a default domain and remove set_platform_dma_ops")
Fixes: 0f6a90436a ("iommu: Do not use IOMMU_DOMAIN_DMA if CONFIG_IOMMU_DMA is not enabled")
Reported-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Closes: https://lore.kernel.org/linux-iommu/20240123165829.630276-1-ovidiu.panait@windriver.com/
Reported-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Closes: https://lore.kernel.org/linux-iommu/170618452753.3805.4425669653666211728.stgit@ltcd48-lp2.aus.stglab.ibm.com/
Tested-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Tested-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/0-v1-755bd21c4a64+525b8-iommu_def_dom_fix_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This fixes warnings in xe, i915 hwmon docs:
Warning: /sys/devices/.../hwmon/hwmon<i>/curr1_crit is defined 2 times: Documentation/ABI/testing/sysfs-driver-intel-xe-hwmon:35 Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon:52
Warning: /sys/devices/.../hwmon/hwmon<i>/energy1_input is defined 2 times: Documentation/ABI/testing/sysfs-driver-intel-xe-hwmon:54 Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon:65
Warning: /sys/devices/.../hwmon/hwmon<i>/in0_input is defined 2 times: Documentation/ABI/testing/sysfs-driver-intel-xe-hwmon:46 Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon:0
Warning: /sys/devices/.../hwmon/hwmon<i>/power1_crit is defined 2 times: Documentation/ABI/testing/sysfs-driver-intel-xe-hwmon:22 Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon:39
Warning: /sys/devices/.../hwmon/hwmon<i>/power1_max is defined 2 times: Documentation/ABI/testing/sysfs-driver-intel-xe-hwmon:0 Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon:8
Warning: /sys/devices/.../hwmon/hwmon<i>/power1_max_interval is defined 2 times: Documentation/ABI/testing/sysfs-driver-intel-xe-hwmon:62 Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon:30
Warning: /sys/devices/.../hwmon/hwmon<i>/power1_rated_max is defined 2 times: Documentation/ABI/testing/sysfs-driver-intel-xe-hwmon:14 Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon:22
Use a path containing the driver name to differentiate the documentation
of each entry.
Fixes: fb1b70607f ("drm/xe/hwmon: Expose power attributes")
Fixes: 92d44a422d ("drm/xe/hwmon: Expose card reactive critical power")
Fixes: fbcdc9d3bf ("drm/xe/hwmon: Expose input voltage attribute")
Fixes: 71d0a32524 ("drm/xe/hwmon: Expose hwmon energy attribute")
Fixes: 4446fcf220 ("drm/xe/hwmon: Expose power1_max_interval")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/all/20240125113345.291118ff@canb.auug.org.au/
Signed-off-by: Badal Nilawar <badal.nilawar@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240127165040.2348009-1-badal.nilawar@intel.com
(cherry picked from commit 20485e3a81)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
All GuC ABI definitions are unsigned and not defining as unsigned is
causing build errors [1].
[1] https://lore.kernel.org/all/20240123111235.3097079-1-geert@linux-m68k.org/
Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240131025424.2087936-1-matthew.brost@intel.com
(cherry picked from commit d83d8ae275)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
The construct allocating only parts of the vma structure when
the userptr part is not needed is very fragile. A developer could
add additional fields below the userptr part, and the code could
easily attempt to access the userptr part even if its not persent.
So introduce xe_userptr_vma which subclasses struct xe_vma the
proper way, and accordingly modify a couple of interfaces.
This should also help if adding userptr helpers to drm_gpuvm.
v2:
- Fix documentation of to_userptr_vma() (Matthew Brost)
- Fix allocation and freeing of vmas to clearer distinguish
between the types.
Closes: https://lore.kernel.org/intel-xe/0c4cc1a7-f409-4597-b110-81f9e45d1ffe@embeddedor.com/T/#u
Fixes: a4cc60a55f ("drm/xe: Only alloc userptr part of xe_vma for userptrs")
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240131091628.12318-1-thomas.hellstrom@linux.intel.com
(cherry picked from commit 5bd24e7882)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
The sparc build fails [1] due to CTX_VALID being redefined. Fix this by
using a better naming convention of LRC_VALID as this define is used in
setting bits in the lrc descriptor. To be uniform, change other define
with LRC prefix too.
[1] https://lore.kernel.org/all/20240123111235.3097079-1-geert@linux-m68k.org/
v2:
- s/LEGACY_64B_CONTEXT/LRC_LEGACY_64B_CONTEXT (Lucas)
Fixes: 0bc519d20f ("drm/xe: Remove GEN[0-9]*_ prefixes")
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240123212638.1605626-1-matthew.brost@intel.com
(cherry picked from commit 152ca51d8d)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
The error pointer macros are not aware of __user pointers and as a
consequence sparse warns.
Have the copy_mask() function return an integer instead of a __user
pointer.
Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240117134048.165425-5-thomas.hellstrom@linux.intel.com
(cherry picked from commit 78366eed68)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
The way exec ufences are coded only 1 ufence per IOCTL will be signaled.
It is possible to fix this but for current use cases 1 ufence per IOCTL
is sufficient. Enforce a limit of 1 ufence per IOCTL (both exec and bind
to be uniform).
v2:
- Add fixes tag (Thomas)
Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Cc: Mika Kahola <mika.kahola@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Brian Welty <brian.welty@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240124234413.1640825-1-matthew.brost@intel.com
(cherry picked from commit d1df9bfbf6)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
If skip_guc_pc is set for a platform, C6 is disabled directly without
acquiring a mem_access reference, triggering an assertion inside
xe_gt_idle_disable_c6.
Fixes: 975e4a3795 ("drm/xe: Manually setup C6 when skip_guc_pc is set")
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240126220613.865939-2-matthew.d.roper@intel.com
(cherry picked from commit 9f5971bdf7)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
trace_dma_fence_init() uses dma_fence_ops functions
like get_driver_name() and get_timeline_name() to generate trace
information but the Xe KMD implementation of those functions makes
use of xe_hw_fence_ctx that was being set after dma_fence_init().
So here just inverting the order to fix the crash.
Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240124171830.95774-1-jose.souza@intel.com
(cherry picked from commit c6878e4743)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Paolo Abeni says:
====================
selftests: net: a few pmtu.sh fixes
This series try to address CI failures for the pmtu.sh tests. It
does _not_ attempt to enable all the currently skipped cases, to
avoid adding more entropy.
Tested with:
make -C tools/testing/selftests/ TARGETS=net install
vng --build --config tools/testing/selftests/net/config
vng --run . --user root -- \
./tools/testing/selftests/kselftest_install/run_kselftest.sh \
-t net:pmtu.sh
====================
Link: https://lore.kernel.org/r/cover.1706635101.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When running the pmtu.sh via the kselftest infra, accessing
/dev/stdout gives unexpected results:
# dd: failed to open '/dev/stdout': Device or resource busy
# TEST: IPv4, bridged vxlan4: PMTU exceptions [FAIL]
Let dd use directly the standard output to fix the above:
# TEST: IPv4, bridged vxlan4: PMTU exceptions - nexthop objects [ OK ]
Fixes: 136a1b434b ("selftests: net: test vxlan pmtu exceptions with tcp")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/23d7592c5d77d75cff9b34f15c227f92e911c2ae.1706635101.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Daniel Wagner