mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-09-03 17:40:04 +00:00
140 commits
Author | SHA1 | Message | Date | |
---|---|---|---|---|
![]() |
04fd1ca779 |
gpiolib: acpi: Add missing __init(const) markers to initcall-s
The gpiolib ACPI code uses 2 initcall-s and the called function (and used DMI table) is missing __init(const) markers. This commit fixes this freeing up some extra memory once the kernel has completed booting. Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20200325103956.109284-2-hdegoede@redhat.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> |
||
![]() |
0c625ccfe6 |
gpiolib: acpi: Add quirk to ignore EC wakeups on HP x2 10 CHT + AXP288 model
There are at least 3 models of the HP x2 10 models:
Bay Trail SoC + AXP288 PMIC
Cherry Trail SoC + AXP288 PMIC
Cherry Trail SoC + TI PMIC
Like on the other HP x2 10 models we need to ignore wakeup for ACPI GPIO
events on the external embedded-controller pin to avoid spurious wakeups
on the HP x2 10 CHT + AXP288 model too.
This commit adds an extra DMI based quirk for the HP x2 10 CHT + AXP288
model, ignoring wakeups for ACPI GPIO events on the EC interrupt pin
on this model. This fixes spurious wakeups from suspend on this model.
Fixes:
|
||
![]() |
0e91506ba0 |
gpiolib: acpi: Add quirk to ignore EC wakeups on HP x2 10 BYT + AXP288 model
Commit |
||
![]() |
2ccb21f551 |
gpiolib: acpi: Rework honor_wakeup option into an ignore_wake option
Commit |
||
![]() |
efaa87fa09 |
gpiolib: acpi: Correct comment for HP x2 10 honor_wakeup quirk
Commit |
||
![]() |
aa23ca3d98 |
gpiolib: acpi: Add honor_wakeup module-option + quirk mechanism
On some laptops enabling wakeup on the GPIO interrupts used for ACPI _AEI event handling causes spurious wakeups. This commit adds a new honor_wakeup option, defaulting to true (our current behavior), which can be used to disable wakeup on troublesome hardware to avoid these spurious wakeups. This is a workaround for an architectural problem with s2idle under Linux where we do not have any mechanism to immediately go back to sleep after wakeup events, other then for embedded-controller events using the standard ACPI EC interface, for details see: https://lore.kernel.org/linux-acpi/61450f9b-cbc6-0c09-8b3a-aff6bf9a0b3c@redhat.com/ One series of laptops which is not able to suspend without this workaround is the HP x2 10 Cherry Trail models, this commit adds a DMI based quirk which makes sets honor_wakeup to false on these models. Cc: stable@vger.kernel.org Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20200105160357.97154-3-hdegoede@redhat.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> |
||
![]() |
1ad1b54099 |
gpiolib: acpi: Turn dmi_system_id table into a generic quirk table
Turn the existing run_edge_events_on_boot_blacklist dmi_system_id table into a generic quirk table, storing the quirks in the driver_data ptr. This is a preparation patch for adding other types of (DMI based) quirks. Cc: stable@vger.kernel.org Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20200105160357.97154-2-hdegoede@redhat.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> |
||
![]() |
99a0d9f5e8 |
This is the bulk of GPIO changes for the v5.5 kernel cycle
Core changes: - Expose pull up/down flags for the GPIO character device to userspace. After clear input from the RaspberryPi and Beagle communities, it has been established that prototyping, industrial automation and make communities strongly need this feature, and as we want people to use the character device, we have implemented the simple pull up/down interface for GPIO lines. This means we can specify that a (chip-specific) pull up/down resistor can be enabled, but does not offer fine-grained control such as cases where the resistance of the same pull resistor can be controlled (yet). - Introduce devm_fwnode_gpiod_get_index() and start to phase out the old symbol devm_fwnode_get_index_gpiod_from_child(). - A bit of documentation clean-up work. - Introduce a define for GPIO line directions and deploy it in all GPIO drivers in the drivers/gpio directory. - Add a special callback to populate pin ranges when cooperating with the pin control subsystem and registering ranges as part of adding a gpiolib driver and a gpio_irq_chip driver at the same time. This is also deployed in the Intel Merrifield driver. New drivers: - RDA Micro GPIO controller. - XGS-iproc GPIO driver. Driver improvements: - Wake event and debounce support on the Tegra 186 driver. - Finalize the Aspeed SGPIO driver. - MPC8xxx uses a normal IRQ handler rather than a chained handler. -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEElDRnuGcz/wPCXQWMQRCzN7AZXXMFAl3hIDcACgkQQRCzN7AZ XXOOyw/8DcaBV6j3EZPDS+b+N74/flNf9JitdJRCtUPn8mjdm+uKNPxbtL/znZc8 zd3rlpiZOqHy8klB3gOPJsJhgXY9QX/b+F5j8fHZvu0DACugRndCqMJ7wrgwUiPn 2ni6KJmz6z5urhcfaAIgyinTWOMegvSVfqjISaUCRCAg3F9dIeQoulRvTPk2ybvv f31jAGemGbvvQPpd81SYCxuTbMg+jxBIgnOCaX+VmUaBLzh8J2W4It3Myp6M4Sbg Td6QU4b2J2Q0quk/Dc7c4saT+qRODkg2syPKV2YqmWwdLRDxZyKESMdkCXLWlWJU fP+KZ4lDxhCaOAYUrY2sEAYMw4E8MzrfeWikdIe0nk0DWqNQhWvDyzsNsB90XGFb aGgeCPH2W1MdE6usPhLidBaHbLeowzndw5BiEl0UCJUqz7tzTCd5iMIAhoSU/Sr5 ymO8J45G9rdx5pscA3cXhpR/PmqaETYQ/uNrLuxTdI4F4xY12+M0vPrV8z3oDPxB U/uL0v6HndDcFAavQQiMd9eL6Hocirnn+Z2xFut3nOznHY96ozXSnZb3lzvH/kqI Du2C8geboVcZsiZJTKVN1zxnfIA8oDauzTOEpGFbIGFhmy0zt4RRRptL4W8NxeFm KCOk/HqlGeuqJ49epta3mqhUC0MSASA9fdicCdiDqvw+puEznwU= =o13I -----END PGP SIGNATURE----- Merge tag 'gpio-v5.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "This is the bulk of GPIO changes for the v5.5 kernel cycle Core changes: - Expose pull up/down flags for the GPIO character device to userspace. After clear input from the RaspberryPi and Beagle communities, it has been established that prototyping, industrial automation and make communities strongly need this feature, and as we want people to use the character device, we have implemented the simple pull up/down interface for GPIO lines. This means we can specify that a (chip-specific) pull up/down resistor can be enabled, but does not offer fine-grained control such as cases where the resistance of the same pull resistor can be controlled (yet). - Introduce devm_fwnode_gpiod_get_index() and start to phase out the old symbol devm_fwnode_get_index_gpiod_from_child(). - A bit of documentation clean-up work. - Introduce a define for GPIO line directions and deploy it in all GPIO drivers in the drivers/gpio directory. - Add a special callback to populate pin ranges when cooperating with the pin control subsystem and registering ranges as part of adding a gpiolib driver and a gpio_irq_chip driver at the same time. This is also deployed in the Intel Merrifield driver. New drivers: - RDA Micro GPIO controller. - XGS-iproc GPIO driver. Driver improvements: - Wake event and debounce support on the Tegra 186 driver. - Finalize the Aspeed SGPIO driver. - MPC8xxx uses a normal IRQ handler rather than a chained handler" * tag 'gpio-v5.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (64 commits) gpio: Add TODO item for regmap helper Documentation: gpio: driver.rst: Fix warnings gpio: of: Fix bogus reference to gpiod_get_count() gpiolib: Grammar s/manager/managed/ gpio: lynxpoint: Setup correct IRQ handlers MAINTAINERS: Replace my email by one @kernel.org gpiolib: acpi: Make acpi_gpiochip_alloc_event always return AE_OK gpio/mpc8xxx: fix qoriq GPIO reading gpio: mpc8xxx: Don't overwrite default irq_set_type callback gpiolib: acpi: Print pin number on acpi_gpiochip_alloc_event errors gpiolib: fix coding style in gpiod_hog() drm/bridge: ti-tfp410: switch to using fwnode_gpiod_get_index() gpio: merrifield: Pass irqchip when adding gpiochip gpio: merrifield: Add GPIO <-> pin mapping ranges via callback gpiolib: Introduce ->add_pin_ranges() callback gpio: mmio: remove untrue leftover comment gpio: em: Use platform_get_irq() to obtain interrupts gpio: tegra186: Add debounce support gpio: tegra186: Program interrupt route mapping gpio: tegra186: Derive register offsets from bank/port ... |
||
![]() |
d4fc46f173 |
gpiolib: acpi: Make acpi_gpiochip_alloc_event always return AE_OK
acpi_gpiochip_alloc_event is used to loop over all _AEI resources, if we fail to bind an event handler to one of them, that is not a reason to not try the other resources. This commit modifies acpi_gpiochip_alloc_event to always return AE_OK, so that we will always try to add an event handler for all _AEI resources. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20191114102600.34558-2-hdegoede@redhat.com Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> |
||
![]() |
3f86a7e090 |
gpiolib: acpi: Print pin number on acpi_gpiochip_alloc_event errors
Print pin number and error-code on acpi_gpiochip_alloc_event errors, to help debugging these. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20191114102600.34558-1-hdegoede@redhat.com Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> |
||
![]() |
2727315df3 |
gpiolib: acpi: Add Terra Pad 1061 to the run_edge_events_on_boot_blacklist
The Terra Pad 1061 has the usual micro-USB-B id-pin handler, but instead
of controlling the actual micro-USB-B it turns the 5V boost for the
tablet's USB-A connector and its keyboard-cover connector off.
The actual micro-USB-B connector on the tablet is wired for charging only,
and its id pin is *not* connected to the GPIO which is used for the
(broken) id-pin event handler in the DSDT.
While at it not only add a comment why the Terra Pad 1061 is on the
blacklist, but also fix the missing comment for the Minix Neo Z83-4 entry.
Fixes:
|
||
![]() |
bbfe0d6b8b |
This is the bulk of changes in the GPIO subsystem for the
v5.4 kernel cycle. Core changes: - Support hierarchical GPIO irqchips. We now have three consumers that can use this: Intel IXP4xx, ThunderX and Qualcomm SPMI GPIO (in the pinctrl subsystem). The support code has been long in the making and hashed out so it should be easily adaptable for all hierarchical irqchip parents. The code only gets compiled in if hierarchical irqchip is used at the topmost irq controller at least, as the hierarchical irqchip requires strict hierarchy all the way up in the system. - Determine the need for a "valid_mask" for GPIO lines on the gpio_chip and conversely for the "valid_mask" for the GPIO interrupt chip interrupt lines by looking for a .init_valid_mask() callback in the main chip or GPIO interrupt chip respectively. Allocate it with bitmap_alloc(). - Isolate the device tree/open firmware GPIO description code out in its own file properly. - Isolate the ACPI GPIO description code out in its own file properly. - Drop a whole lot of #ifdef:s in the main includes: it does not hurt to keep the include items around, and we get quicker and clearer compile failures if the appropriate kernel symbols are not selected for drivers. New/deleted drivers: - New driver for Aspeed SGPIO. - The KS8695 driver is deleted as the platform gets deleted from arch/arm in this kernel cycle. - The Cirrus Logic Madera driver now supports CS47L92 and CS47L15. - The Freescale MPC8xxx now supports LS1028A and LS1088A. Driver improvements: - We pass the GPIO irqchip intialization by directly filling in the struct instead of using set-up functions (the new way) for Intel MID, Lynxpoint, Merrifield, XLP, HLWD, Aspeed, ZX, VF610, TQMX86, MT7621, Zynq and EP93xx. Out-of-band changes: - Fix a GPIO header inclusion in Unicore - no response from maintainer. - Drop FMC subsystem from MAINTAINERS - was deleted in the GPIO tree last cycle so let's mop up the shards. -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEElDRnuGcz/wPCXQWMQRCzN7AZXXMFAl1/BO0ACgkQQRCzN7AZ XXPiPw/9GPSYqvHuv37RJwUTiaygDleLLayCy73AsudopSeInAfcPIElJgW2/5oa i5x4rdd81SpuReQWNKqqPjuDffdZvJW9rwuXU/LXsOk0fhWIe8BidUPISRPTYSJP q3NpmBJG4opVmhWZ3yxnq9tPboabjdTikVkM90Nwpe3vpdKk/7GV5k/T8/18fXb6 bn7E6YaN6Qrt3jknb+eK+ne6zLv5/ncFIGqYvUPKeqi0MOs4JDc/YroK90MAMSrD WvtOZl72bYKutxa42ZYf0lZVKhZHKMoigulEWczxVxwHSulxbMDbNa+CzNfunkjz 5iBDA34gzliCoA5NdcqMuQs44qkiRBS6ci9PRXBlW9QJuDHzpK5j4mKy2Kp5K2bQ +FX1dAftsAQBEkqVqQs97kGIfE5z0hRsyH8+fLKH3tkZmfkLKjYAB+pwHIhAFwvV f8WJ8Ay+gorvpWDwqjBeP2SnxFCE5GmgZHCfp0oJ1Kr/BM4hLPDT6RwvavDPO7uz xMcJFH1ZS1HCdkuFKOboD+FpRHCDeL4IJvHpal3dcu3P4RMr16M3E+UAeQAwdnYM AmqDYLbXyHdEszpk4uwc0nHt+gwie0CLfhuUvswJunnDkbwXiD4nj2c9ipaFsVLI /KaZvUe44/I5ItRb8vGkpP6Z++QiVqJkmdO0Lxy+UEaV6jb7mfg= =/TRI -----END PGP SIGNATURE----- Merge tag 'gpio-v5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "This is the bulk of changes in the GPIO subsystem for the v5.4 kernel cycle. Core changes: - Support hierarchical GPIO irqchips. We now have three consumers that can use this: Intel IXP4xx, ThunderX and Qualcomm SPMI GPIO (in the pinctrl subsystem). The support code has been long in the making and hashed out so it should be easily adaptable for all hierarchical irqchip parents. The code only gets compiled in if hierarchical irqchip is used at the topmost irq controller at least, as the hierarchical irqchip requires strict hierarchy all the way up in the system. - Determine the need for a "valid_mask" for GPIO lines on the gpio_chip and conversely for the "valid_mask" for the GPIO interrupt chip interrupt lines by looking for a .init_valid_mask() callback in the main chip or GPIO interrupt chip respectively. Allocate it with bitmap_alloc(). - Isolate the device tree/open firmware GPIO description code out in its own file properly. - Isolate the ACPI GPIO description code out in its own file properly. - Drop a whole lot of #ifdef:s in the main includes: it does not hurt to keep the include items around, and we get quicker and clearer compile failures if the appropriate kernel symbols are not selected for drivers. New/deleted drivers: - New driver for Aspeed SGPIO. - The KS8695 driver is deleted as the platform gets deleted from arch/arm in this kernel cycle. - The Cirrus Logic Madera driver now supports CS47L92 and CS47L15. - The Freescale MPC8xxx now supports LS1028A and LS1088A. Driver improvements: - We pass the GPIO irqchip intialization by directly filling in the struct instead of using set-up functions (the new way) for Intel MID, Lynxpoint, Merrifield, XLP, HLWD, Aspeed, ZX, VF610, TQMX86, MT7621, Zynq and EP93xx. Out-of-band changes: - Fix a GPIO header inclusion in Unicore - no response from maintainer. - Drop FMC subsystem from MAINTAINERS - was deleted in the GPIO tree last cycle so let's mop up the shards" * tag 'gpio-v5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (82 commits) gpiolib: of: add a fallback for wlf,reset GPIO name gpio: htc-egpio: Remove unused exported htc_egpio_get_wakeup_irq() gpio: remove explicit comparison with 0 gpio: creg-snps: use devm_platform_ioremap_resource() to simplify code gpio: devres: Switch to EXPORT_SYMBOL_GPL() gpio: of: Switch to EXPORT_SYMBOL_GPL() gpio: of: Make of_gpio_simple_xlate() private gpio: of: Make of_get_named_gpiod_flags() private gpio: aspeed: Add in ast2600 details to Aspeed driver gpio: aspeed: Use ngpio property from device tree if available gpio: aspeed: Setup irqchip dynamically gpio/aspeed: Fix incorrect number of banks gpio: aspeed: Update documentation with ast2600 controllers gpio: Initialize the irqchip valid_mask with a callback gpiolib: acpi: make acpi_can_fallback_to_crs() static gpio: Fix further merge errors gpio: Fix up merge collision in include file gpio: of: Normalize return code variable name gpio: gpiolib: Normalize return code variable name gpio: ep93xx: Pass irqchip when adding gpiochip ... |
||
![]() |
61f7f7c8f9 |
gpiolib: acpi: Add gpiolib_acpi_run_edge_events_on_boot option and blacklist
Another day; another DSDT bug we need to workaround... Since commit |
||
![]() |
4f78d91c72 |
gpiolib: acpi: make acpi_can_fallback_to_crs() static
It is not used outside gpiolib-acpi.c module, so there is no need to export it. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Link: https://lore.kernel.org/r/20190904172624.GA76617@dtor-ws Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> |
||
![]() |
2838bf941b |
gpiolib-acpi: Move acpi_dev_add_driver_gpios() et al to consumer.h
The API, which belongs to GPIO library, is foreign to ACPI headers. Earlier we moved out I²C out of the latter, and now it's time for acpi_dev_add_driver_gpios() et al. For time being the acpi_gpio_get_irq_resource() and acpi_dev_gpio_irq_get() are left untouched as they need more thought about. Note, it requires uninline acpi_dev_remove_driver_gpios() to keep purity of consumer.h. Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Cc: Liam Girdwood <liam.r.girdwood@linux.intel.com> Cc: Jie Yang <yang.jie@linux.intel.com> Cc: Mark Brown <broonie@kernel.org> Cc: alsa-devel@alsa-project.org (moderated list:INTEL ASoC DRIVERS) Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20190730104337.21235-3-andriy.shevchenko@linux.intel.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> |
||
![]() |
77cb907abe |
gpiolib: acpi: Split ACPI stuff to gpiolib-acpi.h
This is a follow up to the commit
|
||
![]() |
5923ea6c2c |
gpio: pass lookup and descriptor flags to request_own
When a gpio_chip wants to request a descriptor from itself using gpiochip_request_own_desc() it needs to be able to specify fully how to use the descriptor, notably line inversion semantics. The workaround in the gpiolib.c can be removed and cases (such as SPI CS) where we need at times to request a GPIO with line inversion semantics directly on a chip for workarounds, can be fully supported with this call. Fix up some users of the API that weren't really using the last flag to set up the line as input or output properly but instead just calling direction setting explicitly after requesting the line. Cc: Martin Sperl <kernel@martin.sperl.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> |
||
![]() |
2d3b6db122 |
gpiolib: acpi: Respect pin bias setting
For now, we don't take into account the pin bias settings supplied by ACPI. This change is targeting the mentioned gap. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> |
||
![]() |
606be34440 |
gpiolib: acpi: Add acpi_gpio_update_gpiod_lookup_flags() helper
This helper consolidates all settings of GPIO descriptor lookup flags and quirks in the future if any. No functional change intended. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> |
||
![]() |
24a4954333 |
gpiolib: acpi: Set pin value, based on bias, more accurately
ACPI GpioIo() resource may have different bias settings. For now, we distinguish only PullUp() setting in order to configure the initial state of a pin. Take into consideration the rest of the possible choices as well, i.e. PullDown, PullNone and PullDefault, when configuring the initial state of the pin. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> |
||
![]() |
80c8d927da |
gpiolib: acpi: Change type of dflags
Most of the code inside GPIO library is using enum gpiod_flags. Some of the function still operate with unsigned int. In order to be more consistent and better type checking, convert acpi_gpiochip_parse_own_gpio() to use enum gpiod_flags instead of unsigned int. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> |
||
![]() |
2d6c06f5a4 |
gpiolib: Introduce GPIO_LOOKUP_FLAGS_DEFAULT
Since GPIO library operates with enumerator when it's subject to handle the GPIO lookup flags, it will be better to clearly see what default means. Thus, introduce GPIO_LOOKUP_FLAGS_DEFAULT entry to describe the default assumptions. While here, replace 0 by newly introduced constant. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> |
||
![]() |
fed7026adc |
gpiolib: Make use of enum gpio_lookup_flags consistent
The library uses enum gpio_lookup_flags to define the possible characteristics of GPIO pin. Since enumerator listed only individual bits the common use of it is in a form of a bitmask of gpio_lookup_flags GPIO_* values. The more correct type for this is unsigned long. Due to above convert all users to use unsigned long instead of enum gpio_lookup_flags except enumerator definition. While here, make field and parameter descriptions consistent as well. Suggested-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> |
||
![]() |
85edcd01a9 |
gpiolib: acpi: Fix references in kernel doc and amend
This patch does the following bunch of changes: - append () to the functions for reference - convert gpiochip(s) -> GPIO chip(s) - add a note about returned error code type [acpi_find_gpio()] - move long summary to a description [acpi_gpio_count()] Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> |
||
![]() |
3601fe43e8 |
This is the bulk of GPIO changes for the v5.1 cycle:
Core changes: - The big change this time around is the irqchip handling in the qualcomm pin controllers, closely coupled with the gpiochip. This rework, in a classic fall-between-the-chairs fashion has been sidestepped for too long. The Qualcomm IRQchips using the SPMI and SSBI transport mechanisms have been rewritten to use hierarchical irqchip. This creates the base from which I intend to gradually pull support for hierarchical irqchips into the gpiolib irqchip helpers to cut down on duplicate code. We have too many hacks in the kernel because people have been working around the missing hierarchical irqchip for years, and once it was there, noone understood it for a while. We are now slowly adapting to using it. This is why this pull requests include changes to MFD, SPMI, IRQchip core and some ARM Device Trees pertaining to the Qualcomm chip family. Since Qualcomm have so many chips and such large deployments it is paramount that this platform gets this right, and now it (hopefully) does. - Core support for pull-up and pull-down configuration, also from the device tree. When a simple GPIO chip support a "off or on" pull-up or pull-down resistor, we provide a way to set this up using machine descriptors or device tree. If more elaborate control of pull up/down (such as resistance shunt setting) is required, drivers should be phased over to use pin control. We do not yet provide a userspace ABI for this pull up-down setting but I suspect the makers are going to ask for it soon enough. PCA953x is the first user of this new API. - The GPIO mockup driver has been revamped after some discussion improving the IRQ simulator in the process. The idea is to make it possible to use the mockup for both testing and virtual prototyping, e.g. when you do not yet have a GPIO expander to play with but really want to get something to develop code around before hardware is available. It's neat. The blackbox testing usecase is currently making its way into kernelci. - ACPI GPIO core preserves non direction flags when updating flags. - A new device core helper for devm_platform_ioremap_resource() is funneled through the GPIO tree with Greg's ACK. New drivers: - TQ-Systems QTMX86 GPIO controllers (using port-mapped I/O) - Gateworks PLD GPIO driver (vaccumed up from OpenWrt) - AMD G-Series PCH (Platform Controller Hub) GPIO driver. - Fintek F81804 & F81966 subvariants. - PCA953x now supports NXP PCAL6416. Driver improvements: - IRQ support on the Nintendo Wii (Hollywood) GPIO. - get_direction() support for the MVEBU driver. - Set the right output level on SAMA5D2. - Drop the unused irq trigger setting on the Spreadtrum driver. - Wakeup support for PCA953x. - A slew of cleanups in the various Intel drivers. -----BEGIN PGP SIGNATURE----- iQIcBAABAgAGBQJcgoLEAAoJEEEQszewGV1zjBAP/3OmTFGv49PFmJwSx+PlLiYf V6/UPaQzq81CGSMtHxbS51TyP9Id7PCfsacbuFYutzn0D1efvl7jrkb8qJ6fVvCM bl/i6q8ipRTPzAf1hD3QCgCe3BXCA064/OcPrz987oIvI3bJQXsmBjBSXHWr4Cwa WfB5DX/afn9TK3XHhMQGfw5f0d+TtnKAs90RTTVKiz9Ow8eFYZJOhgPkvhCR3Gi9 YJIzIAiwhHZ7/zauo4JAYFU/O/Z3YEC5zeLne2ItebzNooRkSxdz0c9Hs7HlCZmU 930Uv9jNN89N3vPqpZzAHtPvwDOmAILMWvKy9xRSp+eoIukarRJgF7ALPk7QWxK1 yy+tGj4dXBQ6tI8W3wUN1WgjNpii3K1HbJ+1LQVQL2/q9o+3YXXqmjdjuw7C8YYV 5ystNrUppkgfIIciHL4lhqw3wKJJhVEAns2V245hIitoShT+RvIg8GQbGZmWlQFd YsHbynqHL9iwfRNv26kEqZXZOo/4D1t6Scw+OPVyba2Wyttf+qbmg+XaYMqFaxYW mfydvdtymeCOUIPJMzw58KGPUTXJ4UPLENyayXNUHokr1a8VO8OIthY7zwi0CpvJ IcsAY9zoGxvfbRV922mlIsw3oOBcM2IN2lC9sY469ZVnjBrdC3rsQpIBZr+Vzz8i YlUfXLSGSyuUZUz//2eG =VoVC -----END PGP SIGNATURE----- Merge tag 'gpio-v5.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "This is the bulk of GPIO changes for the v5.1 cycle: Core changes: - The big change this time around is the irqchip handling in the qualcomm pin controllers, closely coupled with the gpiochip. This rework, in a classic fall-between-the-chairs fashion has been sidestepped for too long. The Qualcomm IRQchips using the SPMI and SSBI transport mechanisms have been rewritten to use hierarchical irqchip. This creates the base from which I intend to gradually pull support for hierarchical irqchips into the gpiolib irqchip helpers to cut down on duplicate code. We have too many hacks in the kernel because people have been working around the missing hierarchical irqchip for years, and once it was there, noone understood it for a while. We are now slowly adapting to using it. This is why this pull requests include changes to MFD, SPMI, IRQchip core and some ARM Device Trees pertaining to the Qualcomm chip family. Since Qualcomm have so many chips and such large deployments it is paramount that this platform gets this right, and now it (hopefully) does. - Core support for pull-up and pull-down configuration, also from the device tree. When a simple GPIO chip supports an "off or on" pull-up or pull-down resistor, we provide a way to set this up using machine descriptors or device tree. If more elaborate control of pull up/down (such as resistance shunt setting) is required, drivers should be phased over to use pin control. We do not yet provide a userspace ABI for this pull up-down setting but I suspect the makers are going to ask for it soon enough. PCA953x is the first user of this new API. - The GPIO mockup driver has been revamped after some discussion improving the IRQ simulator in the process. The idea is to make it possible to use the mockup for both testing and virtual prototyping, e.g. when you do not yet have a GPIO expander to play with but really want to get something to develop code around before hardware is available. It's neat. The blackbox testing usecase is currently making its way into kernelci. - ACPI GPIO core preserves non direction flags when updating flags. - A new device core helper for devm_platform_ioremap_resource() is funneled through the GPIO tree with Greg's ACK. New drivers: - TQ-Systems QTMX86 GPIO controllers (using port-mapped I/O) - Gateworks PLD GPIO driver (vaccumed up from OpenWrt) - AMD G-Series PCH (Platform Controller Hub) GPIO driver. - Fintek F81804 & F81966 subvariants. - PCA953x now supports NXP PCAL6416. Driver improvements: - IRQ support on the Nintendo Wii (Hollywood) GPIO. - get_direction() support for the MVEBU driver. - Set the right output level on SAMA5D2. - Drop the unused irq trigger setting on the Spreadtrum driver. - Wakeup support for PCA953x. - A slew of cleanups in the various Intel drivers" * tag 'gpio-v5.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (110 commits) gpio: gpio-omap: fix level interrupt idling gpio: amd-fch: Set proper output level for direction_output x86: apuv2: remove unused variable gpio: pca953x: Use PCA_LATCH_INT platform/x86: fix PCENGINES_APU2 Kconfig warning gpio: pca953x: Fix dereference of irq data in shutdown gpio: amd-fch: Fix type error found by sparse gpio: amd-fch: Drop const from resource gpio: mxc: add check to return defer probe if clock tree NOT ready gpio: ftgpio: Register per-instance irqchip gpio: ixp4xx: Add DT bindings x86: pcengines apuv2 gpio/leds/keys platform driver gpio: AMD G-Series PCH gpio driver drivers: depend on HAS_IOMEM for devm_platform_ioremap_resource() gpio: tqmx86: Set proper output level for direction_output gpio: sprd: Change to use SoC compatible string gpio: sprd: Use SoC compatible string instead of wildcard string gpio: of: Handle both enable-gpio{,s} gpio: of: Restrict enable-gpio quirk to regulator-gpio gpio: davinci: use devm_platform_ioremap_resource() ... |
||
![]() |
da2577fe63 |
sound updates for 5.1
We had again a busy development cycle with many new drivers as well as lots of core improvements / cleanups. Let's go for highlights: ALSA core: - PCM locking scheme was refactored for reducing a global rwlock - PCM suspend is handled in the device type PM ops now; lots of explicit calls were reduced by this action - Cleanups about PCM buffer preallocation calls - Kill NULL device object in memory allocations - Lots of procfs API cleanups ASoC core: - Support for only powering up channels that are actively being used - Cleanups / fixes of topology API ASoC drivers: - MediaTek BTCVSD for a Bluetooth radio chip, which is the first such driver we've had upstream! - Quite a few improvements to simplify the generic card drivers, especially the merge of the SCU cards into the main generic drivers - Lots of fixes for probing on Intel systems to follow more standard styles - A big refresh and cleanup of the Samsung drivers - New drivers: Asahi Kasei Microdevices AK4497, Cirrus Logic CS4341 and CS35L26, Google ChromeOS embedded controllers, Ingenic JZ4725B, MediaTek BTCVSD, MT8183 and MT6358, NXP MICFIL, Rockchip RK3328, Spreadtrum DMA controllers, Qualcomm WCD9335, Xilinx S/PDIF and PCM formatters ALSA drivers: - Improvements of Tegra HD-audio controller driver for supporting new chips - HD-audio codec quirks for ALC294 S4 resume, ASUS laptop, Chrome headset button support and Dell workstations - Improved DSD support on USB-audio - Quirk for MOTU MicroBook II USB-audio - Support for Fireface UCX support and Solid State Logic Duende Classic/Mini -----BEGIN PGP SIGNATURE----- iQJCBAABCAAsFiEEIXTw5fNLNI7mMiVaLtJE4w1nLE8FAlx5GAUOHHRpd2FpQHN1 c2UuZGUACgkQLtJE4w1nLE9yVA/+LYkM9fkd8BkRvnUxDPQTupBtr5tXjVPC7NHX WEZU+My5bxFvmF0tkV0IeBjzTNhR+ND1HHa4EcJPaV26UX+BBSyM2q8EhPxXJ3Ly o2d6bRYIvyDMEShyzZAlDegZ45LiP9Re7xwfVtA1gFVwCxXeWRXyz8Jj9FjUACVx 1dd74wsVvPwt3uvGnJTEDbtpxA7lLCnVmco0PcXmkBIE0f99EzF/9xGs56UUKrlJ UM+KRH6H5fskESSUdR9MSoOi6Vw794rMNrFQIx9yb6/JHfq1Q5cyxQSx/E+7AMaU 0QrQbKYDRVhrw8P2mVYXvbaZe2SdLMJdOKGXQMdYXpcUgSD0MBnc/O4HCn9HnT89 M4QjoqSWYgipnLHf+O6JfrojF39+TrQ8LQWQZSNDYijOcQvaXAgK+vXmYOSQSQs2 H8fljEHXAIjDOhlBd0J4b9gAn21ijjZUSRBAWkNS0Sp0qBu0WcbBWLph/zHqjd7J UvTILjpKegd28yrsudLXRL73v3fJoWXM7wwrjnGdmi93FhqCNdJ9co/03JNRSlQ9 sFM6YBj6pyg4QkNTpPwZw5nn48uBsbHZRU8la7Vfp0c+XYPkHKR5EwQQ0YoajZhW e2SSeMUVCHGmIAoqweAxakU4zCDvv4wLbnjJRi/BXIh17XrhG4AAiRrYZOYaOCwO Ku/x7dI= =Vh8O -----END PGP SIGNATURE----- Merge tag 'sound-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "We had again a busy development cycle with many new drivers as well as lots of core improvements / cleanups. Let's go for highlights: ALSA core: - PCM locking scheme was refactored for reducing a global rwlock - PCM suspend is handled in the device type PM ops now; lots of explicit calls were reduced by this action - Cleanups about PCM buffer preallocation calls - Kill NULL device object in memory allocations - Lots of procfs API cleanups ASoC core: - Support for only powering up channels that are actively being used - Cleanups / fixes of topology API ASoC drivers: - MediaTek BTCVSD for a Bluetooth radio chip, which is the first such driver we've had upstream! - Quite a few improvements to simplify the generic card drivers, especially the merge of the SCU cards into the main generic drivers - Lots of fixes for probing on Intel systems to follow more standard styles - A big refresh and cleanup of the Samsung drivers - New drivers: Asahi Kasei Microdevices AK4497, Cirrus Logic CS4341 and CS35L26, Google ChromeOS embedded controllers, Ingenic JZ4725B, MediaTek BTCVSD, MT8183 and MT6358, NXP MICFIL, Rockchip RK3328, Spreadtrum DMA controllers, Qualcomm WCD9335, Xilinx S/PDIF and PCM formatters ALSA drivers: - Improvements of Tegra HD-audio controller driver for supporting new chips - HD-audio codec quirks for ALC294 S4 resume, ASUS laptop, Chrome headset button support and Dell workstations - Improved DSD support on USB-audio - Quirk for MOTU MicroBook II USB-audio - Support for Fireface UCX support and Solid State Logic Duende Classic/Mini" * tag 'sound-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (461 commits) ALSA: usb-audio: Add quirk for MOTU MicroBook II ASoC: stm32: i2s: skip useless write in slave mode ASoC: stm32: i2s: fix race condition in irq handler ASoC: stm32: i2s: remove useless callback ASoC: stm32: i2s: fix dma configuration ASoC: stm32: i2s: fix stream count management ASoC: stm32: i2s: fix 16 bit format support ASoC: stm32: i2s: fix IRQ clearing ASoC: qcom: Kconfig: fix dependency for sdm845 ASoC: Intel: Boards: Add Maxim98373 support ASoC: rsnd: gen: fix SSI9 4/5/6/7 busif related register address ALSA: firewire-motu: fix construction of PCM frame for capture direction ALSA: bebob: use more identical mod_alias for Saffire Pro 10 I/O against Liquid Saffire 56 ALSA: hda: Extend i915 component bind timeout ASoC: wm_adsp: Improve logging messages ASoC: wm_adsp: Add support for multiple compressed buffers ASoC: wm_adsp: Refactor compress stream initialisation ASoC: wm_adsp: Reorder some functions for improved clarity ASoC: wm_adsp: Factor out stripping padding from ADSP data ASoC: cs35l36: Fix an IS_ERR() vs NULL checking bug ... |
||
![]() |
7db52b5ace |
Merge branch 'acpica'
* acpica: ACPICA: Update version to 20190215 ACPI/ACPICA: Trivial: fix spelling mistakes and fix whitespace formatting ACPICA: ACPI 6.3: add GTDT Revision 3 support ACPICA: ACPI 6.3: HMAT updates ACPICA: ACPI 6.3: PPTT add additional fields in Processor Structure Flags ACPICA: ACPI 6.3: add Error Disconnect Recover Notification value ACPICA: ACPI 6.3: MADT: add support for statistical profiling in GICC ACPICA: ACPI 6.3: add PCC operation region support for AML interpreter ACPICA: ACPI 6.3: SRAT: add Generic Affinity Structure subtable ACPICA: ACPI 6.3: Add Trigger order to PCC Identifier structure in PDTT ACPICA: ACPI 6.3: Adding predefined methods _NBS, _NCH, _NIC, _NIH, and _NIG ACPICA: Update/clarify messages for control method failures ACPICA: Debugger: Fix possible fault with the "test objects" command ACPICA: Interpreter: Emit warning for creation of a zero-length op region ACPICA: Remove legacy module-level code support ACPICA: Get rid of acpi_sleep_dispatch() ACPICA: Update version to 20190108 ACPICA: All acpica: Update copyrights to 2019 ACPICA: acpiexec: Add option to dump extra info for memory leaks ACPICA: Convert more ACPI errors to firmware errors |
||
![]() |
c163f90cc8 |
ACPI/ACPICA: Trivial: fix spelling mistakes and fix whitespace formatting
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
![]() |
8fab3d713c |
gpio updates for v5.1
- support for a new variant of pca953x - documentation fix from Wolfram - some tegra186 name changes - two minor fixes for madera and altera-a10sr -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEFp3rbAvDxGAT0sefEacuoBRx13IFAlxleLcACgkQEacuoBRx 13I45Q//YMGUYzkMjOL+lp2DYnnVhVNqrF4hoLjinWVrnhZ6gqu88RgV2Cea4Pta oxVxnSsE8LK7kY8VZ8tcBmIqLLkQAJdSVtqkeSoZF2vhWBAbE9ZaSOYb17SIkSXK Ok16lZgZ+ZWOM5EjEvuRpB/qYGjX2glD5/Y2Kl7+wsX1W6U2pXasP0IjhcvDU8mJ NXNgfkr6kluMUqHJyqKo8eT/P3Hdv0CK9GsN2vGyfJenCdTSd7EC6KuhWAivi+fG /lf1bVuc2cCiXjxdSOXx+Yz7SjNe56viTaqnn/K6OlfLgErjKnRW+AxPkTZXNtDi pfMMpPXiwPcbQR2wrXG/7OMmJ1kUsfWoIUCx5RDwhF1KbEQVqgaSITLylk+4Yp/3 eM0fYsQ+KvOdAnWKSgfxBhaaiO7z5XDdrnkSHBDoiBrm07BqBgK/v3Rivzf2GMEv QvM4OBfThS9I8skV5BaOBRDfHZs4N0EU/vhsW9gt50urtlSM0vSYx6kdMq/8R0k4 NkJT43u+1vi5koMljBAsZYZiyXOQ2B+PlfpTMfMu+93QH8wlu9mOt1r3YTQyA1Xf jiOK8M2yQKP5g7RuPM6MtMsqlZKDM5nAlSf7S280Z3+vBd+LaELbXvT2/JL5ViGU hfH/gaNwUGUYd8EsWvfhHVdPAAecDCwxfKyKEnFGhMrtunTgwfI= =nV64 -----END PGP SIGNATURE----- Merge tag 'gpio-v5.1-updates-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into devel gpio updates for v5.1 - support for a new variant of pca953x - documentation fix from Wolfram - some tegra186 name changes - two minor fixes for madera and altera-a10sr |
||
![]() |
4d1f7a6eab
|
gpiolib: acpi: Introduce ACPI_GPIO_QUIRK_ONLY_GPIOIO
New quirk enforces search for GPIO based on its type, i.e. iterate over GpioIo resources only. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mark Brown <broonie@kernel.org> |
||
![]() |
876811f7c3 |
gpiolib: acpi: Correct kernel doc of struct acpi_gpio_event
The checker complains during build gpiolib-acpi.c:45: warning: Function parameter or member 'irq_requested' not described in 'acpi_gpio_event' because the typo in the field description. Fix the name to have documentation up-to-date. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> |
||
![]() |
72893f0c6b |
gpiolib-acpi: Preserve non direction flags when updating gpiod_flags
__acpi_gpio_update_gpiod_flags purpose is to make the gpiod_flags used when requesting a GPIO match the restrictions from the ACPI resource, as stored in acpi_gpio_info.flags. But acpi_gpio_info.flags only contains direction info, and the requester may have passed in special non-direction flags like GPIOD_FLAGS_BIT_NONEXCLUSIVE, which we currently clobber. This commit modifies __acpi_gpio_update_gpiod_flags to preserve these special flags, so that a requested of an ACPI GPIO can e.g. pass GPIOD_FLAGS_BIT_NONEXCLUSIV and have it work as intended. Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> |
||
![]() |
8625232977 |
gpiolib-acpi: Remove unnecessary WARN_ON from acpi_gpiochip_free_interrupts
acpi_gpiochip_alloc_event only continues allocating an event and adding it to the list if gpiochip_request_own_desc does not return an error. So events with an error desc are never placed on the events list and this check is really not necessary. Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> |
||
![]() |
24dc83635f |
This is the bulk of GPIO changes for the v4.21 kernel series:
Core changes: - Some core changes are already in outside of this pull request as they came through the regulator tree, most notably devm_gpiod_unhinge() that removes devres refcount management from a GPIO descriptor. This is needed in subsystems such as regulators where the regulator core need to take over the reference counting and lifecycle management for a GPIO descriptor. - We dropped devm_gpiochip_remove() and devm_gpio_chip_match() as nothing needs it. We can bring it back if need be. - Add a global TODO so people see where we are going. This helps setting the direction now that we are two GPIO maintainers. - Handle the MMC CD/WP properties in the device tree core. (The bulk of patches activating this code is already merged through the MMC/SD tree.) - Augment gpiochip_request_own_desc() to pass a flag so we as gpiochips can request lines as active low or open drain etc even from ourselves. New drivers: - New driver for Cadence GPIO blocks. - New driver for Atmel SAMA5D2 PIOBU GPIO lines. Driver improvements: - A major refactoring of the PCA953x driver - this driver has been around for ages, and is now modernized to reduce code duplication that has stacked up and is using regmap to read write and cache registers. - Intel drivers are now maintained in a separate tree and start with a round of cleanups and unifications. -----BEGIN PGP SIGNATURE----- iQIcBAABAgAGBQJcJJcmAAoJEEEQszewGV1zdCoQAMSLPh+4QdYLFS3ZmnsPvZkg Zkz94RVT+uLLmHpR8XBl0wl4mmYCiwB50IwsXwlvJGceSXjCn6hLg9BZBP5hFMCb yFk3fgXQSh7TOnpjgbCWSssCjpejQ0cOb/2nWHz5s/fbYKYlh3VXckW9hhW+R+b3 6+Mno1SzmBkpVVQ21ISlZeLoNDynkCW6DfjiKMuHAyxzxa0oZ9Qid+tnVDnQM4rD rCnvYLuvxlXw97W+LI7AU9KoCITdO+2M/0dtGVEEYKfHseRReSy2Oo3nlqCglygX cNkBe9RYU1CJdas1P/c18wjDAqWp/pbugzHDkYF5Y3tBtB2rQSftjtnQngiVMXMt De7ejPvL7/OLECvI2WUD6y9NAduw/HE4FO8BBdn0gP/a9svJpVZ993yPd3F9n7EZ ZIBpycDZVtkcE7dwQgek17bFILRY5nBBMB9oCLL2wk48qdmjpcAbxVfGSsYOe6wO +cZRZuj/eR3i9gHRugfFx7Evoc7l4erihTpES/YAy3De1s3uV8KjT4zE7Jh+M9LW GM797BcXJJeb5toC7HZ/G2UAVMyWEhY0n7PGG616CS8IrzmzIZpJOL9kUVOWPb0F 9CPt6qhVbUl9rxp1H/Z3TxvYqIw6icn/z5YewZxLU1zaBlpE3jc7PhZb5hOGnFUf /DWwe4n99JsjHTrGx1ra =05LW -----END PGP SIGNATURE----- Merge tag 'gpio-v4.21-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "This is the bulk of GPIO changes for the v4.21 kernel series. Core changes: - Some core changes are already in outside of this pull request as they came through the regulator tree, most notably devm_gpiod_unhinge() that removes devres refcount management from a GPIO descriptor. This is needed in subsystems such as regulators where the regulator core need to take over the reference counting and lifecycle management for a GPIO descriptor. - We dropped devm_gpiochip_remove() and devm_gpio_chip_match() as nothing needs it. We can bring it back if need be. - Add a global TODO so people see where we are going. This helps setting the direction now that we are two GPIO maintainers. - Handle the MMC CD/WP properties in the device tree core. (The bulk of patches activating this code is already merged through the MMC/SD tree.) - Augment gpiochip_request_own_desc() to pass a flag so we as gpiochips can request lines as active low or open drain etc even from ourselves. New drivers: - New driver for Cadence GPIO blocks. - New driver for Atmel SAMA5D2 PIOBU GPIO lines. Driver improvements: - A major refactoring of the PCA953x driver - this driver has been around for ages, and is now modernized to reduce code duplication that has stacked up and is using regmap to read write and cache registers. - Intel drivers are now maintained in a separate tree and start with a round of cleanups and unifications" * tag 'gpio-v4.21-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (99 commits) gpio: sama5d2-piobu: Depend on OF_GPIO gpio: Add Cadence GPIO driver dt-bindings: gpio: Add bindings for Cadence GPIO gpiolib-acpi: remove unused variable 'err', cleans up build warning gpio: mxs: read pin level directly instead of using .get gpio: aspeed: remove duplicated statement gpio: add driver for SAMA5D2 PIOBU pins dt-bindings: arm: atmel: describe SECUMOD usage as a GPIO controller gpio/mmc/of: Respect polarity in the device tree dt-bindings: gpio: rcar: Add r8a774c0 (RZ/G2E) support memory: omap-gpmc: Get the header of the enum ARM: omap1: Fix new user of gpiochip_request_own_desc() gpio: pca953x: Add regmap dependency for PCA953x driver gpio: raspberrypi-exp: decrease refcount on firmware dt node gpiolib: Fix return value of gpio_to_desc() stub if !GPIOLIB gpio: pca953x: Restore registers after suspend/resume cycle gpio: pca953x: Zap single use of pca953x_read_single() gpio: pca953x: Zap ad-hoc reg_output cache gpio: pca953x: Zap ad-hoc reg_direction cache gpio: pca953x: Perform basic regmap conversion ... |
||
![]() |
6c905f91d8 |
gpiolib-acpi: remove unused variable 'err', cleans up build warning
Variable err is defined but never used. Remove it. Cleans up warning: warning: unused variable ‘err’ [-Wunused-variable] Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> |
||
![]() |
21abf10381 |
gpio: Pass a flag to gpiochip_request_own_desc()
Before things go out of hand, make it possible to pass flags when requesting "own" descriptors from a gpio_chip. This is necessary if the chip wants to request a GPIO with active low semantics, for example. Cc: Janusz Krzysztofik <jmkrzyszt@gmail.com> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Roger Quadros <rogerq@ti.com> Reviewed-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> |
||
![]() |
e59f5e08ec |
gpiolib-acpi: Only defer request_irq for GpioInt ACPI event handlers
Commit |
||
![]() |
bd6bf7c104 |
pci-v4.20-changes
-----BEGIN PGP SIGNATURE----- iQJIBAABCgAyFiEEgMe7l+5h9hnxdsnuWYigwDrT+vwFAlvPV7IUHGJoZWxnYWFz QGdvb2dsZS5jb20ACgkQWYigwDrT+vyaUg//WnCaRIu2oKOp8c/bplZJDW5eT10d oYAN9qeyptU9RYrg4KBNbZL9UKGFTk3AoN5AUjrk8njxc/dY2ra/79esOvZyyYQy qLXBvrXKg3yZnlNlnyBneGSnUVwv/kl2hZS+kmYby2YOa8AH/mhU0FIFvsnfRK2I XvwABFm2ZYvXCqh3e5HXaHhOsR88NQ9In0AXVC7zHGqv1r/bMVn2YzPZHL/zzMrF mS79tdBTH+shSvchH9zvfgIs+UEKvvjEJsG2liwMkcQaV41i5dZjSKTdJ3EaD/Y2 BreLxXRnRYGUkBqfcon16Yx+P6VCefDRLa+RhwYO3dxFF2N4ZpblbkIdBATwKLjL npiGc6R8yFjTmZU0/7olMyMCm7igIBmDvWPcsKEE8R4PezwoQv6YKHBMwEaflIbl Rv4IUqjJzmQPaA0KkRoAVgAKHxldaNqno/6G1FR2gwz+fr68p5WSYFlQ3axhvTjc bBMJpB/fbp9WmpGJieTt6iMOI6V1pnCVjibM5ZON59WCFfytHGGpbYW05gtZEod4 d/3yRuU53JRSj3jQAQuF1B6qYhyxvv5YEtAQqIFeHaPZ67nL6agw09hE+TlXjWbE rTQRShflQ+ydnzIfKicFgy6/53D5hq7iH2l7HwJVXbXRQ104T5DB/XHUUTr+UWQn /Nkhov32/n6GjxQ= =58I4 -----END PGP SIGNATURE----- Merge tag 'pci-v4.20-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: - Fix ASPM link_state teardown on removal (Lukas Wunner) - Fix misleading _OSC ASPM message (Sinan Kaya) - Make _OSC optional for PCI (Sinan Kaya) - Don't initialize ASPM link state when ACPI_FADT_NO_ASPM is set (Patrick Talbert) - Remove x86 and arm64 node-local allocation for host bridge structures (Punit Agrawal) - Pay attention to device-specific _PXM node values (Jonathan Cameron) - Support new Immediate Readiness bit (Felipe Balbi) - Differentiate between pciehp surprise and safe removal (Lukas Wunner) - Remove unnecessary pciehp includes (Lukas Wunner) - Drop pciehp hotplug_slot_ops wrappers (Lukas Wunner) - Tolerate PCIe Slot Presence Detect being hardwired to zero to workaround broken hardware, e.g., the Wilocity switch/wireless device (Lukas Wunner) - Unify pciehp controller & slot structs (Lukas Wunner) - Constify hotplug_slot_ops (Lukas Wunner) - Drop hotplug_slot_info (Lukas Wunner) - Embed hotplug_slot struct into users instead of allocating it separately (Lukas Wunner) - Initialize PCIe port service drivers directly instead of relying on initcall ordering (Keith Busch) - Restore PCI config state after a slot reset (Keith Busch) - Save/restore DPC config state along with other PCI config state (Keith Busch) - Reference count devices during AER handling to avoid race issue with concurrent hot removal (Keith Busch) - If an Upstream Port reports ERR_FATAL, don't try to read the Port's config space because it is probably unreachable (Keith Busch) - During error handling, use slot-specific reset instead of secondary bus reset to avoid link up/down issues on hotplug ports (Keith Busch) - Restore previous AER/DPC handling that does not remove and re-enumerate devices on ERR_FATAL (Keith Busch) - Notify all drivers that may be affected by error recovery resets (Keith Busch) - Always generate error recovery uevents, even if a driver doesn't have error callbacks (Keith Busch) - Make PCIe link active reporting detection generic (Keith Busch) - Support D3cold in PCIe hierarchies during system sleep and runtime, including hotplug and Thunderbolt ports (Mika Westerberg) - Handle hpmemsize/hpiosize kernel parameters uniformly, whether slots are empty or occupied (Jon Derrick) - Remove duplicated include from pci/pcie/err.c and unused variable from cpqphp (YueHaibing) - Remove driver pci_cleanup_aer_uncorrect_error_status() calls (Oza Pawandeep) - Uninline PCI bus accessors for better ftracing (Keith Busch) - Remove unused AER Root Port .error_resume method (Keith Busch) - Use kfifo in AER instead of a local version (Keith Busch) - Use threaded IRQ in AER bottom half (Keith Busch) - Use managed resources in AER core (Keith Busch) - Reuse pcie_port_find_device() for AER injection (Keith Busch) - Abstract AER interrupt handling to disconnect error injection (Keith Busch) - Refactor AER injection callbacks to simplify future improvments (Keith Busch) - Remove unused Netronome NFP32xx Device IDs (Jakub Kicinski) - Use bitmap_zalloc() for dma_alias_mask (Andy Shevchenko) - Add switch fall-through annotations (Gustavo A. R. Silva) - Remove unused Switchtec quirk variable (Joshua Abraham) - Fix pci.c kernel-doc warning (Randy Dunlap) - Remove trivial PCI wrappers for DMA APIs (Christoph Hellwig) - Add Intel GPU device IDs to spurious interrupt quirk (Bin Meng) - Run Switchtec DMA aliasing quirk only on NTB endpoints to avoid useless dmesg errors (Logan Gunthorpe) - Update Switchtec NTB documentation (Wesley Yung) - Remove redundant "default n" from Kconfig (Bartlomiej Zolnierkiewicz) - Avoid panic when drivers enable MSI/MSI-X twice (Tonghao Zhang) - Add PCI support for peer-to-peer DMA (Logan Gunthorpe) - Add sysfs group for PCI peer-to-peer memory statistics (Logan Gunthorpe) - Add PCI peer-to-peer DMA scatterlist mapping interface (Logan Gunthorpe) - Add PCI configfs/sysfs helpers for use by peer-to-peer users (Logan Gunthorpe) - Add PCI peer-to-peer DMA driver writer's documentation (Logan Gunthorpe) - Add block layer flag to indicate driver support for PCI peer-to-peer DMA (Logan Gunthorpe) - Map Infiniband scatterlists for peer-to-peer DMA if they contain P2P memory (Logan Gunthorpe) - Register nvme-pci CMB buffer as PCI peer-to-peer memory (Logan Gunthorpe) - Add nvme-pci support for PCI peer-to-peer memory in requests (Logan Gunthorpe) - Use PCI peer-to-peer memory in nvme (Stephen Bates, Steve Wise, Christoph Hellwig, Logan Gunthorpe) - Cache VF config space size to optimize enumeration of many VFs (KarimAllah Ahmed) - Remove unnecessary <linux/pci-ats.h> include (Bjorn Helgaas) - Fix VMD AERSID quirk Device ID matching (Jon Derrick) - Fix Cadence PHY handling during probe (Alan Douglas) - Signal Cadence Endpoint interrupts via AXI region 0 instead of last region (Alan Douglas) - Write Cadence Endpoint MSI interrupts with 32 bits of data (Alan Douglas) - Remove redundant controller tests for "device_type == pci" (Rob Herring) - Document R-Car E3 (R8A77990) bindings (Tho Vu) - Add device tree support for R-Car r8a7744 (Biju Das) - Drop unused mvebu PCIe capability code (Thomas Petazzoni) - Add shared PCI bridge emulation code (Thomas Petazzoni) - Convert mvebu to use shared PCI bridge emulation (Thomas Petazzoni) - Add aardvark Root Port emulation (Thomas Petazzoni) - Support 100MHz/200MHz refclocks for i.MX6 (Lucas Stach) - Add initial power management for i.MX7 (Leonard Crestez) - Add PME_Turn_Off support for i.MX7 (Leonard Crestez) - Fix qcom runtime power management error handling (Bjorn Andersson) - Update TI dra7xx unaligned access errata workaround for host mode as well as endpoint mode (Vignesh R) - Fix kirin section mismatch warning (Nathan Chancellor) - Remove iproc PAXC slot check to allow VF support (Jitendra Bhivare) - Quirk Keystone K2G to limit MRRS to 256 (Kishon Vijay Abraham I) - Update Keystone to use MRRS quirk for host bridge instead of open coding (Kishon Vijay Abraham I) - Refactor Keystone link establishment (Kishon Vijay Abraham I) - Simplify and speed up Keystone link training (Kishon Vijay Abraham I) - Remove unused Keystone host_init argument (Kishon Vijay Abraham I) - Merge Keystone driver files into one (Kishon Vijay Abraham I) - Remove redundant Keystone platform_set_drvdata() (Kishon Vijay Abraham I) - Rename Keystone functions for uniformity (Kishon Vijay Abraham I) - Add Keystone device control module DT binding (Kishon Vijay Abraham I) - Use SYSCON API to get Keystone control module device IDs (Kishon Vijay Abraham I) - Clean up Keystone PHY handling (Kishon Vijay Abraham I) - Use runtime PM APIs to enable Keystone clock (Kishon Vijay Abraham I) - Clean up Keystone config space access checks (Kishon Vijay Abraham I) - Get Keystone outbound window count from DT (Kishon Vijay Abraham I) - Clean up Keystone outbound window configuration (Kishon Vijay Abraham I) - Clean up Keystone DBI setup (Kishon Vijay Abraham I) - Clean up Keystone ks_pcie_link_up() (Kishon Vijay Abraham I) - Fix Keystone IRQ status checking (Kishon Vijay Abraham I) - Add debug messages for all Keystone errors (Kishon Vijay Abraham I) - Clean up Keystone includes and macros (Kishon Vijay Abraham I) - Fix Mediatek unchecked return value from devm_pci_remap_iospace() (Gustavo A. R. Silva) - Fix Mediatek endpoint/port matching logic (Honghui Zhang) - Change Mediatek Root Port Class Code to PCI_CLASS_BRIDGE_PCI (Honghui Zhang) - Remove redundant Mediatek PM domain check (Honghui Zhang) - Convert Mediatek to pci_host_probe() (Honghui Zhang) - Fix Mediatek MSI enablement (Honghui Zhang) - Add Mediatek system PM support for MT2712 and MT7622 (Honghui Zhang) - Add Mediatek loadable module support (Honghui Zhang) - Detach VMD resources after stopping root bus to prevent orphan resources (Jon Derrick) - Convert pcitest build process to that used by other tools (iio, perf, etc) (Gustavo Pimentel) * tag 'pci-v4.20-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (140 commits) PCI/AER: Refactor error injection fallbacks PCI/AER: Abstract AER interrupt handling PCI/AER: Reuse existing pcie_port_find_device() interface PCI/AER: Use managed resource allocations PCI: pcie: Remove redundant 'default n' from Kconfig PCI: aardvark: Implement emulated root PCI bridge config space PCI: mvebu: Convert to PCI emulated bridge config space PCI: mvebu: Drop unused PCI express capability code PCI: Introduce PCI bridge emulated config space common logic PCI: vmd: Detach resources after stopping root bus nvmet: Optionally use PCI P2P memory nvmet: Introduce helper functions to allocate and free request SGLs nvme-pci: Add support for P2P memory in requests nvme-pci: Use PCI p2pmem subsystem to manage the CMB IB/core: Ensure we map P2P memory correctly in rdma_rw_ctx_[init|destroy]() block: Add PCI P2P flag for request queue PCI/P2PDMA: Add P2P DMA driver writer's documentation docs-rst: Add a new directory for PCI documentation PCI/P2PDMA: Introduce configfs/sysfs enable attribute helpers PCI/P2PDMA: Add PCI p2pmem DMA mappings to adjust the bus offset ... |
||
![]() |
114b5f8f7e |
This is the bulk of GPIO changes for the v4.20 series:
Core changes: - A patch series from Hans Verkuil to make it possible to enable/disable IRQs on a GPIO line at runtime and drive GPIO lines as output without having to put/get them from scratch. The irqchip callbacks have been improved so that they can use only the fastpatch callbacks to enable/disable irqs like any normal irqchip, especially the gpiod_lock_as_irq() has been improved to be callable in fastpath context. A bunch of rework had to be done to achieve this but it is a big win since I never liked to restrict this to slowpath. The only call requireing slowpath was try_module_get() and this is kept at the .request_resources() slowpath callback. In the GPIO CEC driver this is a big win sine a single line is used for both outgoing and incoming traffic, and this needs to use IRQs for incoming traffic while actively driving the line for outgoing traffic. - Janusz Krzysztofik improved the GPIO array API to pass a "cookie" (struct gpio_array) and a bitmap for setting or getting multiple GPIO lines at once. This improvement orginated in a specific need to speed up an OMAP1 driver and has led to a much better API and real performance gains when the state of the array can be used to bypass a lot of checks and code when we want things to go really fast. The previous code would minimize the number of calls down to the driver callbacks assuming the CPU speed was orders of magnitude faster than the I/O latency, but this assumption was wrong on several platforms: what we needed to do was to profile and improve the speed on the hot path of the array functions and this change is now completed. - Clean out the painful and hard to grasp BNF experiments from the device tree bindings. Future approaches are looking into using JSON schema for this purpose. (Rob Herring is floating a patch series.) New drivers: - The RCAR driver now supports r8a774a1 (RZ/G2M). - Synopsys GPIO via CREGs driver. Major improvements: - Modernization of the EP93xx driver to use irqdomain and other contemporary concepts. - The ingenic driver has been merged into the Ingenic pin control driver and removed from the GPIO subsystem. - Debounce support in the ftgpio010 driver. -----BEGIN PGP SIGNATURE----- iQIcBAABAgAGBQJbzdyOAAoJEEEQszewGV1zfYcP/0HBEAOPhHD/i5OQxfKs1msh mFT/t/IbTmRpCgbEv4CDx4Kc/InE0sUnQr1TL/1WvU6uObM6Ncxq5Z90MvyrgzYu BqQHq2k2tORvkVSNRxcfD/BAAoo1EerXts1kDhutvdKfepfS6DxpENwzvsFgkVlq 2jj1cdZztjv8A+9cspHDpQP+jDvl1VSc10nR5fRu1TttSpUwzRJaB30NBNXJmMJc 5KUr67lEbsQRPsBvFErU11bydPqhfT+pXmODcfIwS0EtATQ8WC5mkSb/Ooei0fvT oZ7uR3Os8tMf7isOKssEyFabKwhnfOEt6TBt9em0TfUtInOo0Dc7r8TfBcn57fyZ xg2R9DQEVRfac8bjhF/BI5KHuN9IMGDDvj6XApumQVliZbISRjMnh3jte6RpcV0A Ejqz8FeDY13qvEdOnW1EPpwmXdDVWiEAq0ebGLStKNls+/4gB2HmyxGUOzJf+og5 hujsxcJzGQqjCe0moeY/1d7vsy0ZjbHoS+p5fy79U212y2O7onEzFU92AX89bxKC rx2eCNmiZxCUy1nqu8edO62VnH6QdnqG3o+a4DJfCSHPvFM/E/NX9zHemZubQQ4I rYXNy4bL4tEG9cqWMfBxWrpiDZw7H6l8kXwdZG8IMyRU9BcKu96amgZ+jBXwzoaB JZelAAUWB9APghJYFr7o =YosT -----END PGP SIGNATURE----- Merge tag 'gpio-v4.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "This is the bulk of GPIO changes for the v4.20 series: Core changes: - A patch series from Hans Verkuil to make it possible to enable/disable IRQs on a GPIO line at runtime and drive GPIO lines as output without having to put/get them from scratch. The irqchip callbacks have been improved so that they can use only the fastpatch callbacks to enable/disable irqs like any normal irqchip, especially the gpiod_lock_as_irq() has been improved to be callable in fastpath context. A bunch of rework had to be done to achieve this but it is a big win since I never liked to restrict this to slowpath. The only call requireing slowpath was try_module_get() and this is kept at the .request_resources() slowpath callback. In the GPIO CEC driver this is a big win sine a single line is used for both outgoing and incoming traffic, and this needs to use IRQs for incoming traffic while actively driving the line for outgoing traffic. - Janusz Krzysztofik improved the GPIO array API to pass a "cookie" (struct gpio_array) and a bitmap for setting or getting multiple GPIO lines at once. This improvement orginated in a specific need to speed up an OMAP1 driver and has led to a much better API and real performance gains when the state of the array can be used to bypass a lot of checks and code when we want things to go really fast. The previous code would minimize the number of calls down to the driver callbacks assuming the CPU speed was orders of magnitude faster than the I/O latency, but this assumption was wrong on several platforms: what we needed to do was to profile and improve the speed on the hot path of the array functions and this change is now completed. - Clean out the painful and hard to grasp BNF experiments from the device tree bindings. Future approaches are looking into using JSON schema for this purpose. (Rob Herring is floating a patch series.) New drivers: - The RCAR driver now supports r8a774a1 (RZ/G2M). - Synopsys GPIO via CREGs driver. Major improvements: - Modernization of the EP93xx driver to use irqdomain and other contemporary concepts. - The ingenic driver has been merged into the Ingenic pin control driver and removed from the GPIO subsystem. - Debounce support in the ftgpio010 driver" * tag 'gpio-v4.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (116 commits) gpio: Clarify kerneldoc on gpiochip_set_chained_irqchip() gpio: Remove unused 'irqchip' argument to gpiochip_set_cascaded_irqchip() gpio: Drop parent irq assignment during cascade setup mmc: pwrseq_simple: Fix incorrect handling of GPIO bitmap gpio: fix SNPS_CREG kconfig dependency warning gpiolib: Initialize gdev field before is used gpio: fix kernel-doc after devres.c file rename gpio: fix doc string for devm_gpiochip_add_data() to not talk about irq_chip gpio: syscon: Fix possible NULL ptr usage gpiolib: Show correct direction from the beginning pinctrl: msm: Use init_valid_mask exported function gpiolib: Add init_valid_mask exported function GPIO: add single-register GPIO via CREG driver dt-bindings: Document the Synopsys GPIO via CREG bindings gpio: mockup: use device properties instead of platform_data gpio: Slightly more helpful debugfs gpio: omap: Remove set but not used variable 'dev' gpio: omap: drop omap_gpio_list Accept partial 'gpio-line-names' property. gpio: omap: get rid of the conditional PM runtime calls ... |
||
![]() |
5f5e4890d5 |
ACPI / property: Allow multiple property compatible _DSD entries
It is possible to have _DSD entries where the data is compatible with device properties format but are using different GUID for various reasons. In addition to that there can be many such _DSD entries for a single device such as for PCIe root port used to host a Thunderbolt hierarchy: Scope (\_SB.PCI0.RP21) { Name (_DSD, Package () { ToUUID ("6211e2c0-58a3-4af3-90e1-927a4e0c55a4"), Package () { Package () {"HotPlugSupportInD3", 1} }, ToUUID ("efcc06cc-73ac-4bc3-bff0-76143807c389"), Package () { Package () {"ExternalFacingPort", 1}, Package () {"UID", 0 } } }) } More information about these new _DSD entries can be found in: https://docs.microsoft.com/en-us/windows-hardware/drivers/pci/dsd-for-pcie-root-ports To make these available for drivers via unified device property APIs, modify ACPI property core so that it supports multiple _DSD entries organized in a linked list. We also store GUID of each _DSD entry in struct acpi_device_properties in case there is need to differentiate between entries. The supported GUIDs are then listed in prp_guids array. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> |
||
![]() |
dae5f0afcf |
gpio: Use SPDX header for core library
Use the SPDX headers and cut down on boilerplate to indicate the license in the core gpiolib implementation. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> |
||
![]() |
f13a0b0bb4 |
gpio: Get rid of legacy header
A bunch of core gpiolib files still include the <linux/gpio.h> legacy API header for no good reason. After this only the gpiolib-legacy.c file includes it, which is fine. The sysfs ABI code has a pointless wrapper function around gpio_to_desc() we can just loose. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> |
||
![]() |
78d3a92edb |
gpiolib-acpi: Register GpioInt ACPI event handlers from a late_initcall
GpioInt ACPI event handlers may see there IRQ triggered immediately after requesting the IRQ (esp. level triggered ones). This means that they may run before any other (builtin) drivers have had a chance to register their OpRegion handlers, leading to errors like this: [ 1.133274] ACPI Error: No handler for Region [PMOP] ((____ptrval____)) [UserDefinedRegion] (20180531/evregion-132) [ 1.133286] ACPI Error: Region UserDefinedRegion (ID=141) has no handler (20180531/exfldio-265) [ 1.133297] ACPI Error: Method parse/execution failed \_SB.GPO2._L01, AE_NOT_EXIST (20180531/psparse-516) We already defer the manual initial trigger of edge triggered interrupts by running it from a late_initcall handler, this commit replaces this with deferring the entire acpi_gpiochip_request_interrupts() call till then, fixing the problem of some OpRegions not being registered yet. Note that this removes the need to have a list of edge triggered handlers which need to run, since the entire acpi_gpiochip_request_interrupts() call is now delayed, acpi_gpiochip_request_interrupt() can call these directly now. Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> |
||
![]() |
993b9bc5c4 |
gpiolib: acpi: Switch to cansleep version of GPIO library call
The commit |
||
![]() |
2c20443ec2 |
ACPI updates for 4.19-rc1
- Revert two ACPICA commits that are not needed any more (Erik Schmauss). - Rework property graph support in the ACPI device properties framework to make it behave more like the analogous DT code and update the documentation of it (Sakari Ailus). - Change the default ACPI device status after initialization to ACPI_STA_DEFAULT instead of 0 (Hans de Goede). - Add a special platform driver for enumerating multiple I2C devices hooked up to the same object in the ACPI tables (Hans de Goede). - Fix the ACPI battery driver to avoid reporting full capacity on systems without support for that and clean it up (Hans de Goede, Dmitry Rozhkov, Lucas Rangit Magasweran). - Add two system wakeup quirks to the ACPI EC driver (Aaron Ma, Mika Westerberg). - Add the touchscreen on Dell Venue Pro 7139 to the list of "always present" devices to make it work (Tristian Celestin). - Revert a special tables handling quirk for Dell XPS 9570 and Precision M5530 which is not needed any more (Kai Heng Feng). - Add support for a new OEM _OSI string to allow system vendors to work around issues with NVidia HDMI audio (Alex Hung). - Prevent the ACPI button driver from reporting excessive system wakeup events and clean it up (Ravi Chandra Sadineni, Randy Dunlap). - Clean up two minor code style issues in the ACPI core and GHES handling on ARM64 (Dongjiu Geng, John Garry, Tom Todd). -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iQIcBAABCAAGBQJbcqQyAAoJEILEb/54YlRxpeIP/i+eB9sq+Pwwb6rpvrcx8JkQ cWYbjBQPZLsqqHBQDlwVC4I5o0gn6OhRsQlgSQdxheXA+G6kRtbh942oPptIH7NY vF0g0OYFZGhahjgkLyBtXlacMi+A+aSFkZ6lc4Ie4x/nFAELumjpYtef4v09Ecme p1G5wz5KYv+47t0DHl+Lb1NglIHsLKtiNMiy9QHyXl3oxrcbW7VIG5o8INw6TgIg /yaYOAzU8UMjnhcn6gDgrD+OKdux8jt3yAaHW/90/zBp4qbAJ9fp8zhb5LP7M0sE r63pC2qUq7NDKAl99sMuX5I2jSub9d2yJcjcOSyt+FnB/ErsBCbJGm5rEkK4sRHv wkV8ybHdq+PkOblR1ob5LMvDXcTlsVTMPonS/oPbEH4J7+jbJjU4vxZxblJGyan6 6GeiOoI6tMyZB7DBiTJH4EgwcNu6GESfPURnyUqRGCUswS7ocQBmRdSbsf6hRgn9 loOZnYXb+PPIxYHH9deFsej71d6En9bMUyUZmOGeLWZ+NSW69XISgnke0tmtgvlZ pj3zJ7Egnw4SBms2gL/VtPEulxJ2MxScju1RbKMpjP86oIDrO4u3pD8tYSTouSSG P3AjFXVqpKMTmfVUnbqu/Avg7GsuDHcv8lgUbY8BQGLXaZVni2oJBtcwc8Ca0lJg 8q0xTvX+YEnuOwgvNoNz =5mW8 -----END PGP SIGNATURE----- Merge tag 'acpi-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI updates from Rafael Wysocki: "These revert two ACPICA commits that are not needed any more, rework the property graphs support in ACPI to be more aligned with the analogous DT code, add some new quirks and remove one that isn't needed any more, add a special platform driver to enumerate multiple I2C devices hooked up to the same device object in the ACPI tables and update the battery and button drivers. Specifics: - Revert two ACPICA commits that are not needed any more (Erik Schmauss). - Rework property graph support in the ACPI device properties framework to make it behave more like the analogous DT code and update the documentation of it (Sakari Ailus). - Change the default ACPI device status after initialization to ACPI_STA_DEFAULT instead of 0 (Hans de Goede). - Add a special platform driver for enumerating multiple I2C devices hooked up to the same object in the ACPI tables (Hans de Goede). - Fix the ACPI battery driver to avoid reporting full capacity on systems without support for that and clean it up (Hans de Goede, Dmitry Rozhkov, Lucas Rangit Magasweran). - Add two system wakeup quirks to the ACPI EC driver (Aaron Ma, Mika Westerberg). - Add the touchscreen on Dell Venue Pro 7139 to the list of "always present" devices to make it work (Tristian Celestin). - Revert a special tables handling quirk for Dell XPS 9570 and Precision M5530 which is not needed any more (Kai Heng Feng). - Add support for a new OEM _OSI string to allow system vendors to work around issues with NVidia HDMI audio (Alex Hung). - Prevent the ACPI button driver from reporting excessive system wakeup events and clean it up (Ravi Chandra Sadineni, Randy Dunlap). - Clean up two minor code style issues in the ACPI core and GHES handling on ARM64 (Dongjiu Geng, John Garry, Tom Todd)" * tag 'acpi-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (34 commits) platform/x86: Add ACPI i2c-multi-instantiate pseudo driver ACPI / x86: utils: Remove status workaround from acpi_device_always_present() ACPI / scan: Create platform device for fwnodes with multiple i2c devices ACPI / scan: Initialize status to ACPI_STA_DEFAULT ACPI / EC: Add another entry for Thinkpad X1 Carbon 6th ACPI: bus: Fix a pointer coding style issue arm64 / ACPI: clean the additional checks before calling ghes_notify_sea() ACPI / scan: Add static attribute to indirect_io_hosts[] ACPI / battery: Do not export energy_full[_design] on devices without full_charge_capacity ACPI / EC: Use ec_no_wakeup on ThinkPad X1 Yoga 3rd ACPI / battery: get rid of negations in conditions ACPI / battery: use specialized print macros ACPI / battery: reorder headers alphabetically ACPI / battery: drop inclusion of init.h ACPI: battery: remove redundant old_present check on insertion ACPI: property: graph: Update graph documentation to use generic references ACPI: property: graph: Improve graph documentation for port/ep numbering ACPI: property: graph: Fix graph documentation ACPI: property: Update documentation for hierarchical data extension 1.1 ACPI: property: Document key numbering for hierarchical data extension refs ... |
||
![]() |
ca876c7483 |
gpiolib-acpi: make sure we trigger edge events at least once on boot
On some systems using edge triggered ACPI Event Interrupts, the initial state at boot is not setup by the firmware, instead relying on the edge irq event handler running at least once to setup the initial state. 2 known examples of this are: 1) The Surface 3 has its _LID state controlled by an ACPI operation region triggered by a GPIO event: OperationRegion (GPOR, GeneralPurposeIo, Zero, One) Field (GPOR, ByteAcc, NoLock, Preserve) { Connection ( GpioIo (Shared, PullNone, 0x0000, 0x0000, IoRestrictionNone, "\\_SB.GPO0", 0x00, ResourceConsumer, , ) { // Pin list 0x004C } ), HELD, 1 } Method (_E4C, 0, Serialized) // _Exx: Edge-Triggered GPE { If ((HELD == One)) { ^^LID.LIDB = One } Else { ^^LID.LIDB = Zero Notify (LID, 0x80) // Status Change } Notify (^^PCI0.SPI1.NTRG, One) // Device Check } Currently, the state of LIDB is wrong until the user actually closes or open the cover. We need to trigger the GPIO event once to update the internal ACPI state. Coincidentally, this also enables the Surface 2 integrated HID sensor hub which also requires an ACPI gpio operation region to start initialization. 2) Various Bay Trail based tablets come with an external USB mux and TI T1210B USB phy to enable USB gadget mode. The mux is controlled by a GPIO which is controlled by an edge triggered ACPI Event Interrupt which monitors the micro-USB ID pin. When the tablet is connected to a PC (or no cable is plugged in), the ID pin is high and the tablet should be in gadget mode. But the GPIO controlling the mux is initialized by the firmware so that the USB data lines are muxed to the host controller. This means that if the user wants to use gadget mode, the user needs to first plug in a host-cable to force the ID pin low and then unplug it and connect the tablet to a PC, to get the ACPI event handler to run and switch the mux to device mode, This commit fixes both by running the event-handler once on boot. Note that the running of the event-handler is done from a late_initcall, this is done because the handler AML code may rely on OperationRegions registered by other builtin drivers. This avoids errors like these: [ 0.133026] ACPI Error: No handler for Region [XSCG] ((____ptrval____)) [GenericSerialBus] (20180531/evregion-132) [ 0.133036] ACPI Error: Region GenericSerialBus (ID=9) has no handler (20180531/exfldio-265) [ 0.133046] ACPI Error: Method parse/execution failed \_SB.GPO2._E12, AE_NOT_EXIST (20180531/psparse-516) Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> [hdegoede: Document BYT USB mux reliance on initial trigger] [hdegoede: Run event handler from a late_initcall, rather then immediately] Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> |
||
![]() |
977d5ad39f |
ACPI: Convert ACPI reference args to generic fwnode reference args
Convert all users of struct acpi_reference_args to more generic fwnode_reference_args. This will 1) avoid an ACPI specific references to device nodes with integer arguments as well as 2) allow making references to nodes other than device nodes in ACPI. As a by-product, convert the fwnode interger arguments to u64. The arguments were 64-bit integers on ACPI but the fwnode arguments were just 32-bit. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
![]() |
ef991796be |
This is the bulk of pin control changes for the v4.16 kernel cycle:
Core changes: - After lengthy discussions and partly due to my ignorance, we have merged a patch making pinctrl_force_default() and pinctrl_force_sleep() reprogram the states into the hardware of any hogged pins, even if they are already in the desired state. This only apply to hogged pins since groups of pins owned by drivers need to be managed by each driver, lest they could not do things like runtime PM and put pins to sleeping state even if the system as a whole is not in sleep. New drivers: - New driver for the Microsemi Ocelot SoC. This is used in ethernet switches. - The X-Powers AXP209 GPIO driver was extended to also deal with pin control and moved over from the GPIO subsystem. This circuit is a mixed-mode integrated circuit which is part of AllWinner designs. - New subdriver for the Qualcomm MSM8998 SoC, core of a high end mobile devices (phones) chipset. - New subdriver for the ST Microelectronics STM32MP157 MPU and STM32F769 MCU from the STM32 family. - New subdriver for the MediaTek MT7622 SoC. This is used for routers, repeater, gateways and such network infrastructure. - New subdriver for the NXP (former Freescale) i.MX 6ULL. This SoC has multimedia features and target "smart devices", I guess in-car entertainment, in-flight entertainment, industrial control panels etc. General improvements: - Incremental improvements on the SH-PFC subdrivers for things like the CAN bus. - Enable the glitch filter on Baytrail GPIOs used for interrupts. - Proper handling of pins to GPIO ranges on the Semtec SX150X - An IRQ setup ordering fix on MCP23S08. - A good set of janitorial coding style fixes. -----BEGIN PGP SIGNATURE----- iQIcBAABAgAGBQJadGEKAAoJEEEQszewGV1zA4QQALs8edxhv4qV5vm50mTdrO3n QtRhJNb53j6MIKtjFnazMvh6MXRIP+08SyX9sDLi5AxINIVuyQh3mrcB6Zc9zN58 +6jFFOIbfm5E8by4n3wnKm3F/WAbNBZph9eT2Rn3cDv9o9hQbyNJ50sQkQMCjd9X WGR353c3OL4zb3vU8t72G/RPYUY1w1SkG9bGzRuSif8LawDcN6v6MMo2XhZA6RqM 3qYIG29vJ1n0weggUIBeSAJIzk4eMwcoWCbVWxhns5JGxw5VPES1zbSp1D+mbzRC 01i5Pt/gD+cWN/Kk/zKIMo1OqLAl+uLr6hzepj6W+5wu9CcQz/BgvRx7HUqnqgyh S8cN4AOgWmW+T75pHypd1WVic3q0RCXkFY8jjHpCATDY+Z+js0lZRs3y4DBiJ2ys DMVBeumDINKqaZ6aLH6lVkm+SxXOUy143arQQIzi0/F7fAp68i+9ofIO8B5smEmd 0S+3sT0sO5QXVgZJ0t0iGUUG5irXi8XtF5qvRmuFZUe0OLGgKX20oCdC0pH0WU4M OZO1Bvb8vmn1tddogO2WlHeg6amWdwxtDuBsLRO3YILLu3jwPjhNqNmErXzXEmWt TY9l2M1uQmoJibNpmTjOzSfj4OtUHMwkDrFRJHAcUPcKwdEy4MyzFL16ATnIwgY9 AmyMLNWJd8Wazgc6BK6w =gLY/ -----END PGP SIGNATURE----- Merge tag 'pinctrl-v4.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "This is the bulk of pin control changes for the v4.16 kernel cycle. Like with GPIO it is actually a bit calm this time. Core changes: - After lengthy discussions and partly due to my ignorance, we have merged a patch making pinctrl_force_default() and pinctrl_force_sleep() reprogram the states into the hardware of any hogged pins, even if they are already in the desired state. This only apply to hogged pins since groups of pins owned by drivers need to be managed by each driver, lest they could not do things like runtime PM and put pins to sleeping state even if the system as a whole is not in sleep. New drivers: - New driver for the Microsemi Ocelot SoC. This is used in ethernet switches. - The X-Powers AXP209 GPIO driver was extended to also deal with pin control and moved over from the GPIO subsystem. This circuit is a mixed-mode integrated circuit which is part of AllWinner designs. - New subdriver for the Qualcomm MSM8998 SoC, core of a high end mobile devices (phones) chipset. - New subdriver for the ST Microelectronics STM32MP157 MPU and STM32F769 MCU from the STM32 family. - New subdriver for the MediaTek MT7622 SoC. This is used for routers, repeater, gateways and such network infrastructure. - New subdriver for the NXP (former Freescale) i.MX 6ULL. This SoC has multimedia features and target "smart devices", I guess in-car entertainment, in-flight entertainment, industrial control panels etc. General improvements: - Incremental improvements on the SH-PFC subdrivers for things like the CAN bus. - Enable the glitch filter on Baytrail GPIOs used for interrupts. - Proper handling of pins to GPIO ranges on the Semtec SX150X - An IRQ setup ordering fix on MCP23S08. - A good set of janitorial coding style fixes" * tag 'pinctrl-v4.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (102 commits) pinctrl: mcp23s08: fix irq setup order pinctrl: Forward declare struct device pinctrl: sunxi: Use of_clk_get_parent_count() instead of open coding pinctrl: stm32: add STM32F769 MCU support pinctrl: sx150x: Add a static gpio/pinctrl pin range mapping pinctrl: sx150x: Register pinctrl before adding the gpiochip pinctrl: sx150x: Unregister the pinctrl on release pinctrl: ingenic: Remove redundant dev_err call in ingenic_pinctrl_probe() pinctrl: sprd: Use seq_putc() in sprd_pinconf_group_dbg_show() pinctrl: pinmux: Use seq_putc() in pinmux_pins_show() pinctrl: abx500: Use seq_putc() in abx500_gpio_dbg_show() pinctrl: mediatek: mt7622: align error handling of mtk_hw_get_value call pinctrl: mediatek: mt7622: fix potential uninitialized value being returned pinctrl: uniphier: refactor drive strength get/set functions pinctrl: imx7ulp: constify struct imx_cfg_params_decode pinctrl: imx: constify struct imx_pinctrl_soc_info pinctrl: imx7d: simplify imx7d_pinctrl_probe pinctrl: imx: use struct imx_pinctrl_soc_info as a const pinctrl: sunxi-pinctrl: fix pin funtion can not be match correctly. pinctrl: qcom: Add msm8998 pinctrl driver ... |
||
![]() |
9798f5178f |
The is the bulk of GPIO changes for the v4.16 kernel cycle.
Core changes: - Disallow open drain and open source flags to be set simultaneously. This doesn't make electrical sense, and would the hardware actually respond to this setting, the result would be short circuit. - ACPI GPIO has a new core infrastructure for handling quirks. The quirks are there to deal with broken ACPI tables centrally instead of pushing the work to individual drivers. In the world of BIOS writers, the ACPI tables are perfect. Until they find a mistake in it. When such a mistake is found, we can patch it with a quirk. It should never happen, the problem is that it happens. So we accomodate for it. - Several documentation updates. - Revert the patch setting up initial direction state from reading the device. This was causing bad things for drivers that can't read status on all its pins. It is only affecting debugfs information quality. - Label descriptors with the device name if no explicit label is passed in. - Pave the ground for transitioning SPI and regulators to use GPIO descriptors by implementing some quirks in the device tree GPIO parsing code. New drivers: - New driver for the Access PCIe IDIO 24 family. Other: - Major refactorings and improvements to the GPIO mockup driver used for test and verification. - Moved the AXP209 driver over to pin control since it gained a pin control back-end. These patches will appear (with the same hashes) in the pin control pull request as well. - Convert the onewire GPIO driver w1-gpio to use descriptors. This is merged here since the W1 maintainers send very few pull requests and he ACKed it. - Start to clean up driver headers using <linux/gpio.h> to just use <linux/gpio/driver.h> as appropriate. -----BEGIN PGP SIGNATURE----- iQIcBAABAgAGBQJacIW6AAoJEEEQszewGV1z9b0P/jxWKaCAGFTTu/HZQ79RBAFq w33nIazzoh+88sN7A9xKexpr4ibOxiCvOwkTtrUBNaxGGy5fslj4+OY5BzunEfBK 1vYxyEqtenvvZK03pOd6CSfHKV+vD5ngnVHGdtGzRvtmDDiSgtzqyEyUhQcXM+l7 PrEh6qrd4TBZezlVR8kn5eqcmclkCBVSQCuLSq+ThMmCKRZuOdf1Im3D6eBzh1/N P81HdcglqbSsfUl1RcFiHs9Z+KcZOq83CNl2Ej1LePK2JBZbmkx9dR+WSJmV1u4P 6wvzFcQDhfGEiiteg2BS5c+o6aAyShpuRNut+2MLre8icmdfpqUEqFotHbfQjW5y sqaejGsJ5aHcRBq7UUM+F9s1R0iN3tlafi3L0WEhl0Tn5huRQq3Uqcw6e5l+XrWd 0h+b5PbKJZO/iqzRhSl+rhc0V2CFDJOCwvY+JX6356fvrcF0T6LhvKfDYtKU3Iyb HB0RG1OcYe228f96azvafCkFyBIYX9mqHBvOXpQQgrZQYXfN1rupLvpOhxC+Wbvn nsGE2bdD6HA1bytTbkxbL+QWP7faHf5YVcZpaN7UWbO3sOzL46fj8eHwHUim95Tr pR5kDZRhZd8+9SCNZ/ttpaEbis9MOqS/3Mlxrj4GXtfFFmR53hjFy2bG/Z7R2RB0 MlSEJRc8iDIs+1j3D2RR =k5nL -----END PGP SIGNATURE----- Merge tag 'gpio-v4.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "The is the bulk of GPIO changes for the v4.16 kernel cycle. It is pretty calm this time around I think. I even got time to get to things like starting to clean up header includes. Core changes: - Disallow open drain and open source flags to be set simultaneously. This doesn't make electrical sense, and would the hardware actually respond to this setting, the result would be short circuit. - ACPI GPIO has a new core infrastructure for handling quirks. The quirks are there to deal with broken ACPI tables centrally instead of pushing the work to individual drivers. In the world of BIOS writers, the ACPI tables are perfect. Until they find a mistake in it. When such a mistake is found, we can patch it with a quirk. It should never happen, the problem is that it happens. So we accomodate for it. - Several documentation updates. - Revert the patch setting up initial direction state from reading the device. This was causing bad things for drivers that can't read status on all its pins. It is only affecting debugfs information quality. - Label descriptors with the device name if no explicit label is passed in. - Pave the ground for transitioning SPI and regulators to use GPIO descriptors by implementing some quirks in the device tree GPIO parsing code. New drivers: - New driver for the Access PCIe IDIO 24 family. Other: - Major refactorings and improvements to the GPIO mockup driver used for test and verification. - Moved the AXP209 driver over to pin control since it gained a pin control back-end. These patches will appear (with the same hashes) in the pin control pull request as well. - Convert the onewire GPIO driver w1-gpio to use descriptors. This is merged here since the W1 maintainers send very few pull requests and he ACKed it. - Start to clean up driver headers using <linux/gpio.h> to just use <linux/gpio/driver.h> as appropriate" * tag 'gpio-v4.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (103 commits) gpio: Timestamp events in hardirq handler gpio: Fix kernel stack leak to userspace gpio: Fix a documentation spelling mistake gpio: Documentation update gpiolib: remove redundant initialization of pointer desc gpio: of: Fix NPE from OF flags gpio: stmpe: Delete an unnecessary variable initialisation in stmpe_gpio_probe() gpio: stmpe: Move an assignment in stmpe_gpio_probe() gpio: stmpe: Improve a size determination in stmpe_gpio_probe() gpio: stmpe: Use seq_putc() in stmpe_dbg_show() gpio: No NULL owner gpio: stmpe: i2c transfer are forbiden in atomic context gpio: davinci: Include proper header gpio: da905x: Include proper header gpio: cs5535: Include proper header gpio: crystalcove: Include proper header gpio: bt8xx: Include proper header gpio: bcm-kona: Include proper header gpio: arizona: Include proper header gpio: amd8111: Include proper header ... |
||
![]() |
8227033547 |
gpio: fix "gpio-line-names" property retrieval
Following commit |