As usual, there are lots of minor driver changes across SoC platforms
from NXP, Amlogic, AMD Zynq, Mediatek, Qualcomm, Apple and Samsung.
These usually add support for additional chip variations in existing
drivers, but also add features or bugfixes.
The SCMI firmware subsystem gains a unified raw userspace interface
through debugfs, which can be used for validation purposes.
Newly added drivers include:
- New power management drivers for StarFive JH7110, Allwinner D1 and
Renesas RZ/V2M
- A driver for Qualcomm battery and power supply status
- A SoC device driver for identifying Nuvoton WPCM450 chips
- A regulator coupler driver for Mediatek MT81xxv
-----BEGIN PGP SIGNATURE-----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=p6Xp
-----END PGP SIGNATURE-----
Merge tag 'soc-drivers-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"As usual, there are lots of minor driver changes across SoC platforms
from NXP, Amlogic, AMD Zynq, Mediatek, Qualcomm, Apple and Samsung.
These usually add support for additional chip variations in existing
drivers, but also add features or bugfixes.
The SCMI firmware subsystem gains a unified raw userspace interface
through debugfs, which can be used for validation purposes.
Newly added drivers include:
- New power management drivers for StarFive JH7110, Allwinner D1 and
Renesas RZ/V2M
- A driver for Qualcomm battery and power supply status
- A SoC device driver for identifying Nuvoton WPCM450 chips
- A regulator coupler driver for Mediatek MT81xxv"
* tag 'soc-drivers-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (165 commits)
power: supply: Introduce Qualcomm PMIC GLINK power supply
soc: apple: rtkit: Do not copy the reg state structure to the stack
soc: sunxi: SUN20I_PPU should depend on PM
memory: renesas-rpc-if: Remove redundant division of dummy
soc: qcom: socinfo: Add IDs for IPQ5332 and its variant
dt-bindings: arm: qcom,ids: Add IDs for IPQ5332 and its variant
dt-bindings: power: qcom,rpmpd: add RPMH_REGULATOR_LEVEL_LOW_SVS_L1
firmware: qcom_scm: Move qcom_scm.h to include/linux/firmware/qcom/
MAINTAINERS: Update qcom CPR maintainer entry
dt-bindings: firmware: document Qualcomm SM8550 SCM
dt-bindings: firmware: qcom,scm: add qcom,scm-sa8775p compatible
soc: qcom: socinfo: Add Soc IDs for IPQ8064 and variants
dt-bindings: arm: qcom,ids: Add Soc IDs for IPQ8064 and variants
soc: qcom: socinfo: Add support for new field in revision 17
soc: qcom: smd-rpm: Add IPQ9574 compatible
soc: qcom: pmic_glink: remove redundant calculation of svid
soc: qcom: stats: Populate all subsystem debugfs files
dt-bindings: soc: qcom,rpmh-rsc: Update to allow for generic nodes
soc: qcom: pmic_glink: add CONFIG_NET/CONFIG_OF dependencies
soc: qcom: pmic_glink: Introduce altmode support
...
- Add PINCTRL_PINFUNCTION() macro and use it in several
drivers.
New drivers:
- New driver for the StarFive JH7110 SoC "sys" and "aon"
(always-on) pin controllers. (RISC-V.)
- New subdriver for the Qualcomm QDU1000/QRU1000 SoC pin
controller.
- New subdrivers for the Qualcomm SM8550 SoC and LPASS
pin controllers.
- New subdriver for the Qualcomm SA8775P SoC pin controller.
- New subdriver for the Qualcomm IPQ5332 SoC pin controller.
- New (trivial) support for Qualcomm PM8550 and PMR735D PMIC
pin control.
- New subdriver for the Mediatek MT7981 SoC pin controller.
Improvements:
- Several cleanups and refactorings to the Intel drivers.
- Add 4KOhm bias support to the Intel driver.
- Use the NOIRQ_SYSTEM_SLEEP_PM_OPS for the AT91 driver.
- Support general purpose clocks in the Qualcomm MSM8226 SoC.
- Several conversions to use the new I2C .probe_new() call.
- Massive clean-up of the Qualcomm Device Tree YAML schemas.
- Add VIN[45] pins, groups and functions to the Renesas
r8a77950 SoC driver.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEElDRnuGcz/wPCXQWMQRCzN7AZXXMFAmP1/+EACgkQQRCzN7AZ
XXMKXw//VTMUTZ5mS9GWk8F3MSkHQ9p1nE9I7KxMHWkWZ5b7kNWUI8x7SM1FO42L
mlIWeHEr5ZJxooZYYllrgVcEB70LMobFf5dwNaF7V4toIwlHCF8FZ5yAN6fS3Do8
hykck13KWirNl/gBYFhy9s8hRdaAnW7bFN/gewuKAFJH3NCAztrJiug4ggkkR1N6
rRlmi0RaOPjVcb/osvgAUxfpdW69VxlEDs/viJdIdx4criRZI0qphmfAhYU0wKl+
o0qFu1R/qTvtikKNrb/7yzKIXokraMP2lL+QniOVbiaj5Cyl0liO65+wtOIjYQSd
J7dwelecHX7Q8QJCIeugBf7DQskw0a9OlXNUucvgD4q7sKY/JrwFSp9Zyf2PKUaL
iBqEoC6XNjPvK97+Zx1uj1BkPk0ikYUKHXLMuLchcINevGr8xphpkfVL3/S4jNDR
n0SxnvtvhY1lqAu+czhotMDBsj5UrnDKd4KDIpWdoUeHCql11F7iPRurTQcl/4qF
vYTZ/5PwYTlJJV6/Ra10jcHXBQmbcWyYK+gIqfT8nYTWDAx96Dw0gx7ggObv9XFr
rt3RbH2J/cEx1VdspWe4wu9SYmBBiQuubI/Ii9WpPNfIfNyBWwaELYXjSYhTt/07
TivLZbvn2Efu7n7hVubx/DkArLGpVevSdWtOwalTCtBaMUSUdGA=
=P75R
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"Nothing special, notably a lot of new Qualcomm hardware is supported,
a RISC-V reference SoC and then some cleanups both in code and device
tree bindings.
Core changes:
- Add PINCTRL_PINFUNCTION() macro and use it in several drivers
New drivers:
- New driver for the StarFive JH7110 SoC "sys" and "aon" (always-on)
pin controllers. (RISC-V.)
- New subdriver for the Qualcomm QDU1000/QRU1000 SoC pin controller
- New subdrivers for the Qualcomm SM8550 SoC and LPASS pin
controllers
- New subdriver for the Qualcomm SA8775P SoC pin controller
- New subdriver for the Qualcomm IPQ5332 SoC pin controller
- New (trivial) support for Qualcomm PM8550 and PMR735D PMIC pin
control
- New subdriver for the Mediatek MT7981 SoC pin controller
Improvements:
- Several cleanups and refactorings to the Intel drivers
- Add 4KOhm bias support to the Intel driver
- Use the NOIRQ_SYSTEM_SLEEP_PM_OPS for the AT91 driver
- Support general purpose clocks in the Qualcomm MSM8226 SoC
- Several conversions to use the new I2C .probe_new() call
- Massive clean-up of the Qualcomm Device Tree YAML schemas
- Add VIN[45] pins, groups and functions to the Renesas r8a77950 SoC
driver"
* tag 'pinctrl-v6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (118 commits)
pinctrl: qcom: Add support for i2c specific pull feature
pinctrl: starfive: Add StarFive JH7110 aon controller driver
pinctrl: starfive: Add StarFive JH7110 sys controller driver
dt-bindings: pinctrl: Add StarFive JH7110 aon pinctrl
dt-bindings: pinctrl: Add StarFive JH7110 sys pinctrl
pinctrl: add mt7981 pinctrl driver
dt-bindings: pinctrl: add bindings for MT7981 SoC
dt-bindings: pinctrl: rockchip,pinctrl: mark gpio sub nodes of pinctrl as deprecated
pinctrl: qcom: Introduce IPQ5332 TLMM driver
dt-bindings: pinctrl: qcom: add IPQ5332 pinctrl
dt-bindings: pinctrl: qcom: lpass-lpi: correct GPIO name pattern
pinctrl: qcom: pinctrl-sm8550-lpass-lpi: add SM8550 LPASS
dt-bindings: pinctrl: qcom,sm8550-lpass-lpi-pinctrl: add SM8550 LPASS
pinctrl: at91: use devm_kasprintf() to avoid potential leaks
dt-bindings: pinctrl: qcom: correct gpio-ranges in examples
dt-bindings: pinctrl: qcom,msm8994: correct number of GPIOs
dt-bindings: pinctrl: qcom,sdx55: correct GPIO name pattern
dt-bindings: pinctrl: qcom,msm8953: correct GPIO name pattern
dt-bindings: pinctrl: qcom,sm6375: correct GPIO name pattern and example
dt-bindings: pinctrl: qcom,msm8909: correct GPIO name pattern and example
...
Core GPIOLIB:
- drop several OF interfaces after moving a significant part of the code to
using software nodes
- remove more interfaces referring to the global GPIO numberspace that we're
getting rid of
- improvements in the gpio-regmap library
- add helper for GPIO device reference counting
- remove unused APIs
- minor tweaks like sorting headers alphabetically
Extended support in existing drivers:
- add support for Tegra 234 PMC to gpio-tegra186
Driver improvements:
- migrate the 104-dio/idi family of drivers to using the regmap-irq API
- migrate gpio-i8255 and gpio-mm to the GPIO regmap API
- clean-ups in gpio-pca953x
- remove duplicate assignments of of_gpio_n_cells in gpio-davinci, gpio-ge,
gpio-xilinx, gpio-zevio and gpio-wcd934x
- improvements to gpio-pcf857x: implement get/set_multiple callbacks, use
generic device properties instead of OF + minor tweaks
- fix OF-related header includes and Kconfig dependencies in gpio-zevio
- dynamically allocate the GPIO base in gpio-omap
- use a dedicated printf specifier for printing fwnode info in gpio-sim
- use dev_name() for the GPIO chip label in gpio-vf610
- other minor tweaks and fixes
Documentation:
- remove mentions of legacy API from comments in various places
- convert the DT binding documents to YAML schema for Fujitsu MB86S7x, Unisoc
GPIO and Unisoc EIC
- document the Unisoc UMS512 controller in DT bindings
-----BEGIN PGP SIGNATURE-----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=wWXb
-----END PGP SIGNATURE-----
Merge tag 'gpio-updates-for-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"A rather small update, there are no new drivers, just improvements and
refactoring in existing ones.
Thanks to migrating of several drivers to using generalized APIs and
dropping of OF interfaces in favor of using software nodes we're
actually removing more code than we're adding.
Core GPIOLIB:
- drop several OF interfaces after moving a significant part of the
code to using software nodes
- remove more interfaces referring to the global GPIO numberspace
that we're getting rid of
- improvements in the gpio-regmap library
- add helper for GPIO device reference counting
- remove unused APIs
- minor tweaks like sorting headers alphabetically
Extended support in existing drivers:
- add support for Tegra 234 PMC to gpio-tegra186
Driver improvements:
- migrate the 104-dio/idi family of drivers to using the regmap-irq
API
- migrate gpio-i8255 and gpio-mm to the GPIO regmap API
- clean-ups in gpio-pca953x
- remove duplicate assignments of of_gpio_n_cells in gpio-davinci,
gpio-ge, gpio-xilinx, gpio-zevio and gpio-wcd934x
- improvements to gpio-pcf857x: implement get/set_multiple callbacks,
use generic device properties instead of OF + minor tweaks
- fix OF-related header includes and Kconfig dependencies in
gpio-zevio
- dynamically allocate the GPIO base in gpio-omap
- use a dedicated printf specifier for printing fwnode info in
gpio-sim
- use dev_name() for the GPIO chip label in gpio-vf610
- other minor tweaks and fixes
Documentation:
- remove mentions of legacy API from comments in various places
- convert the DT binding documents to YAML schema for Fujitsu
MB86S7x, Unisoc GPIO and Unisoc EIC
- document the Unisoc UMS512 controller in DT bindings"
* tag 'gpio-updates-for-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (54 commits)
gpio: sim: Use %pfwP specifier instead of calling fwnode API directly
gpio: tegra186: remove unneeded loop in tegra186_gpio_init_route_mapping()
gpiolib: of: Move enum of_gpio_flags to its only user
gpio: mvebu: Use IS_REACHABLE instead of IS_ENABLED for CONFIG_PWM
gpio: zevio: Add missing header
gpio: Get rid of gpio_to_chip()
gpio: pcf857x: Drop unneeded explicit casting
gpio: pcf857x: Make use of device properties
gpio: pcf857x: Get rid of legacy platform data
gpio: rockchip: Do not mention legacy API in the code
gpio: wcd934x: Remove duplicate assignment of of_gpio_n_cells
gpio: zevio: Use proper headers and drop OF_GPIO dependency
gpio: zevio: Remove duplicate assignment of of_gpio_n_cells
gpio: xilinx: Remove duplicate assignment of of_gpio_n_cells
dt-bindings: gpio: Add compatible string for Unisoc UMS512
dt-bindings: gpio: Convert Unisoc EIC controller binding to yaml
dt-bindings: gpio: Convert Unisoc GPIO controller binding to yaml
gpio: ge: Remove duplicate assignment of of_gpio_n_cells
gpio: davinci: Remove duplicate assignment of of_gpio_n_cells
gpio: omap: use dynamic allocation of base
...
This is a follow-up to the deprecation of most of the old-style board
files that was merged in linux-6.0, removing them for good.
This branch is almost exclusively dead code removal based on those
annotations. Some device driver removals went through separate subsystem
trees, but the majority is in the same branch, in order to better handle
dependencies between the patches and avoid breaking bisection.
Unfortunately that leads to merge conflicts against other changes in the
subsystem trees, but they should all be trivial to resolve by removing
the files.
See commit 7d0d3fa733 ("Merge tag 'arm-boardfiles-6.0' of
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc") for the
description of which machines were marked unused and are now removed. The
only removals that got postponed are Terastation WXL (mv78xx0) and
Jornada720 (StrongARM1100), which turned out to still have potential
users.
-----BEGIN PGP SIGNATURE-----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=WejQ
-----END PGP SIGNATURE-----
Merge tag 'arm-boardfile-remove-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC boardfile updates from Arnd Bergmann
"Unused boardfile removal for 6.3
This is a follow-up to the deprecation of most of the old-style board
files that was merged in linux-6.0, removing them for good.
This branch is almost exclusively dead code removal based on those
annotations. Some device driver removals went through separate
subsystem trees, but the majority is in the same branch, in order to
better handle dependencies between the patches and avoid breaking
bisection.
Unfortunately that leads to merge conflicts against other changes in
the subsystem trees, but they should all be trivial to resolve by
removing the files.
See commit 7d0d3fa733 ("Merge tag 'arm-boardfiles-6.0' of
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc") for the
description of which machines were marked unused and are now removed.
The only removals that got postponed are Terastation WXL (mv78xx0) and
Jornada720 (StrongARM1100), which turned out to still have potential
users"
* tag 'arm-boardfile-remove-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (91 commits)
mmc: omap: drop TPS65010 dependency
ARM: pxa: restore mfp-pxa320.h
usb: ohci-omap: avoid unused-variable warning
ARM: debug: remove references in DEBUG_UART_8250_SHIFT to removed configs
ARM: s3c: remove obsolete s3c-cpu-freq header
MAINTAINERS: adjust SAMSUNG SOC CLOCK DRIVERS after s3c24xx support removal
MAINTAINERS: update file entries after arm multi-platform rework and mach-pxa removal
ARM: remove CONFIG_UNUSED_BOARD_FILES
mfd: remove htc-pasic3 driver
w1: remove ds1wm driver
usb: remove ohci-tmio driver
fbdev: remove w100fb driver
fbdev: remove tmiofb driver
mmc: remove tmio_mmc driver
mfd: remove ucb1400 support
mfd: remove toshiba tmio drivers
rtc: remove v3020 driver
power: remove pda_power supply driver
ASoC: pxa: remove unused board support
pcmcia: remove unused pxa/sa1100 drivers
...
Add support for the new i2c_pull property introduced for SM8550 setting
a I2C specific pull mode on I2C able pins. Add the bit to the SM8550
specific driver while at it.
Co-developed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230209074510.4153294-1-abel.vesa@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Move include/linux/qcom_scm.h to include/linux/firmware/qcom/qcom_scm.h.
This removes 1 of a few remaining Qualcomm-specific headers into a more
approciate subdirectory under include/.
Suggested-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Elliot Berman <quic_eberman@quicinc.com>
Reviewed-by: Guru Das Srinagesh <quic_gurus@quicinc.com>
Acked-by: Mukesh Ojha <quic_mojha@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230203210956.3580811-1-quic_eberman@quicinc.com
The IPQ5332 SoC comes with a TLMM block, like all other Qualcomm
platforms, so add a driver for it.
Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230206071217.29313-3-quic_kathirav@quicinc.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
If the firmware mangled the register contents too much,
check the saved value for the Direct IRQ mode. If it
matches, we will restore the pin state.
Reported-by: Jim Minter <jimminter@microsoft.com>
Fixes: 6989ea4881 ("pinctrl: intel: Save and restore pins in "direct IRQ" mode")
Tested-by: Jim Minter <jimminter@microsoft.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: https://lore.kernel.org/r/20230206141558.20916-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add druver for pin controller in Low Power Audio SubSystem (LPASS). The
driver is similar to SM8450 LPASS pin controller, with differences in
few pin groups (qua_mi2s -> i2s0).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230203174645.597053-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
According to hardware programming guide, the swr_rx_data pin group has
only two pins (GPIO5 and GPIO6). This is also visible in "struct
sm8450_groups" in the driver - GPIO15 does not have swr_rx_data
function.
Fixes: ec1652fc4d ("pinctrl: qcom: Add sm8450 lpass lpi pinctrl driver")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230203165054.390762-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Use devm_kasprintf() instead of kasprintf() to avoid any potential
leaks. At the moment drivers have no remove functionality thus
there is no need for fixes tag.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20230203132714.1931596-1-claudiu.beznea@microchip.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add support for Lemans TLMM configuration and control via the pinctrl
framework.
Signed-off-by: Yadu MG <quic_ymg@quicinc.com>
Signed-off-by: Prasad Sodagudi <quic_psodagud@quicinc.com>
[Bartosz: made the driver ready for upstream]
Co-developed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230201150011.200613-3-brgl@bgdev.pl
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This reverts commit cf517fef60.
The commit cf517fef60 ("pinctrl: aspeed: Force to disable the
function's signal") exposed a problem with fetching the regmap for
reading the GFX register.
The Romulus machine the device tree contains a gpio hog for GPIO S7.
With the patch applied:
Muxing pin 151 for GPIO
Disabling signal VPOB9 for VPO
aspeed-g5-pinctrl 1e6e2080.pinctrl: Failed to acquire regmap for IP block 1
aspeed-g5-pinctrl 1e6e2080.pinctrl: request() failed for pin 151
The code path is aspeed-gpio -> pinmux-g5 -> regmap -> clk, and the
of_clock code returns an error as it doesn't have a valid struct clk_hw
pointer. The regmap call happens because pinmux wants to check the GFX
node (IP block 1) to query bits there.
For reference, before the offending patch:
Muxing pin 151 for GPIO
Disabling signal VPOB9 for VPO
Want SCU8C[0x00000080]=0x1, got 0x0 from 0x00000000
Disabling signal VPOB9 for VPOOFF1
Want SCU8C[0x00000080]=0x1, got 0x0 from 0x00000000
Disabling signal VPOB9 for VPOOFF2
Want SCU8C[0x00000080]=0x1, got 0x0 from 0x00000000
Enabling signal GPIOS7 for GPIOS7
Muxed pin 151 as GPIOS7
gpio-943 (seq_cont): hogged as output/low
We can't skip the clock check to allow pinmux to proceed, because the
write to disable VPOB9 will try to set a bit in the GFX register space
which will not stick when the IP is in reset. However, we do not want to
enable the IP just so pinmux can do a disable-enable dance for the pin.
For now, revert the offending patch while a correct solution is found.
Fixes: cf517fef60 ("pinctrl: aspeed: Force to disable the function's signal")
Link: https://github.com/openbmc/linux/issues/218
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20230130220845.917985-1-joel@jms.id.au
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* Add ~4kOhm bias support to Intel pin control drivers
* Convert Intel pin control drivers to use INTEL_COMMUNITY_*()
* Add struct pinfunction and use it in Intel pin control drivers
* Make pin control documentation up to date
* Miscellaneous cleanups
The following is an automated git shortlog grouped by driver:
pinctrl:
- Proofreading and updating the documentation accordingly
- Proofreading and updating the documentation (part 2)
alderlake:
- Replace ADL_COMMUNITY() by INTEL_COMMUNITY_GPPS()
baytrail:
- Convert to use new memeber in struct intel_function
broxton:
- Replace BXT_COMMUNITY() by INTEL_COMMUNITY_SIZE()
cannonlake:
- Replace CNL_COMMUNITY() by INTEL_COMMUNITY_GPPS()
cedarfork:
- Replace CDF_COMMUNITY() by INTEL_COMMUNITY_GPPS()
cherryview:
- Convert to use new memeber in struct intel_function
denverton:
- Replace DNV_COMMUNITY() by INTEL_COMMUNITY_GPPS()
elkhartlake:
- Replace EHL_COMMUNITY() by INTEL_COMMUNITY_GPPS()
emmitsburg:
- Replace EBG_COMMUNITY() by INTEL_COMMUNITY_GPPS()
geminilake:
- Replace GLK_COMMUNITY() by INTEL_COMMUNITY_SIZE()
icelake:
- Replace ICL_COMMUNITY() by INTEL_COMMUNITY_GPPS()
intel:
- Get rid of unused members in struct intel_function
- Make use of struct pinfunction and PINCTRL_PINFUNCTION()
- Define maximum pad number in the group
- Use same order of bit fields for PADCFG2
- Add ~4k bias support
- Add definitions to all possible biases
- Deduplicate some code in intel_config_set_pull()
- Add default case to intel_config_set_pull()
- Convert to generic_handle_domain_irq()
- Always use gpp_num_padown_regs in the main driver
- Introduce INTEL_COMMUNITY_*() to unify community macros
Introduce struct pinfunction and PINCTRL_PINFUNCTION() macro:
- Introduce struct pinfunction and PINCTRL_PINFUNCTION() macro
jasperlake:
- Replace JSL_COMMUNITY() by INTEL_COMMUNITY_GPPS()
lakefield:
- Replace LKF_COMMUNITY() by INTEL_COMMUNITY_GPPS()
lewisburg:
- Replace LBG_COMMUNITY() by INTEL_COMMUNITY_SIZE()
lynxpoint:
- Convert to use new memeber in struct intel_function
merrifield:
- Convert to use new memeber in struct intel_function
meteorlake:
- Replace MTL_COMMUNITY() by INTEL_COMMUNITY_GPPS()
moorefield:
- Convert to use new memeber in struct intel_function
sunrisepoint:
- Replace SPT_COMMUNITY() by INTEL_COMMUNITY_*()
tigerlake:
- Replace TGL_COMMUNITY() by INTEL_COMMUNITY_GPPS()
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEqaflIX74DDDzMJJtb7wzTHR8rCgFAmPYCVAACgkQb7wzTHR8
rCgn8g//csD+K8oI/IvvY61EiTO/3P+tBgVSphKGgxeVPVJ28nSkqSXaCp7PzgOq
IWKxfjIzX0IHtJ9Kdm0+P0966FzGz9dS1wo9yIW8/z5ZJ63RStRqW72Kg+99dC+w
T1k+JwqUY/qYYEqkYlOV2QzTNCAjDLKokI6gReSvsDeLJw7r9RMkh3xjYRieuIPE
g3anUadyVY7IEPJ/Jt1b6veolAV7vZmYO7fRzoXlhYh+KijSAqAKb16nygl1u1AR
BN1Db8rSIYFPdhMl2b/JEywCf2GO25DYDjczHt5tffzMNgFvbWce8CmQLYvXm7oR
303GM1tBY6ACgRzSIw9R7+1MRpCz90ftimK48HGq+6Gr93eJ+87OAwZMJf7pZktN
xCF73hqkXxIG9p47qhnAsg4StWqpkT7/YpicBwoRWqVx4gAhXxtVesO3bpB2C3Eg
8u+Fpmo2lTIxepRXsemDaMfRfJxk/bChiVGls7FLHHPgQfKuuaSMcApvx0FyWDen
m4AJ8tuWJ7mbOpzZUbaUb3zi1vpdrNmucf56YLjHS24zGgq1dha5iBwRDAYHOUgf
t5OiiYtVMNlUvFbL/yWlrc/bUxs2lqlzUhWAj+ixopP9bIAVMHz2i+vResgNcFI5
fRnSkZszV3kEltiEGD3iyeplp5rE9Ijdpkwde2KhMR7zmbPdDx0=
=ZLEJ
-----END PGP SIGNATURE-----
Merge tag 'intel-pinctrl-v6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/intel into devel
intel-pinctrl for v6.3-1
* Add ~4kOhm bias support to Intel pin control drivers
* Convert Intel pin control drivers to use INTEL_COMMUNITY_*()
* Add struct pinfunction and use it in Intel pin control drivers
* Make pin control documentation up to date
* Miscellaneous cleanups
The following is an automated git shortlog grouped by driver:
pinctrl:
- Proofreading and updating the documentation accordingly
- Proofreading and updating the documentation (part 2)
alderlake:
- Replace ADL_COMMUNITY() by INTEL_COMMUNITY_GPPS()
baytrail:
- Convert to use new memeber in struct intel_function
broxton:
- Replace BXT_COMMUNITY() by INTEL_COMMUNITY_SIZE()
cannonlake:
- Replace CNL_COMMUNITY() by INTEL_COMMUNITY_GPPS()
cedarfork:
- Replace CDF_COMMUNITY() by INTEL_COMMUNITY_GPPS()
cherryview:
- Convert to use new memeber in struct intel_function
denverton:
- Replace DNV_COMMUNITY() by INTEL_COMMUNITY_GPPS()
elkhartlake:
- Replace EHL_COMMUNITY() by INTEL_COMMUNITY_GPPS()
emmitsburg:
- Replace EBG_COMMUNITY() by INTEL_COMMUNITY_GPPS()
geminilake:
- Replace GLK_COMMUNITY() by INTEL_COMMUNITY_SIZE()
icelake:
- Replace ICL_COMMUNITY() by INTEL_COMMUNITY_GPPS()
intel:
- Get rid of unused members in struct intel_function
- Make use of struct pinfunction and PINCTRL_PINFUNCTION()
- Define maximum pad number in the group
- Use same order of bit fields for PADCFG2
- Add ~4k bias support
- Add definitions to all possible biases
- Deduplicate some code in intel_config_set_pull()
- Add default case to intel_config_set_pull()
- Convert to generic_handle_domain_irq()
- Always use gpp_num_padown_regs in the main driver
- Introduce INTEL_COMMUNITY_*() to unify community macros
Introduce struct pinfunction and PINCTRL_PINFUNCTION() macro:
- Introduce struct pinfunction and PINCTRL_PINFUNCTION() macro
jasperlake:
- Replace JSL_COMMUNITY() by INTEL_COMMUNITY_GPPS()
lakefield:
- Replace LKF_COMMUNITY() by INTEL_COMMUNITY_GPPS()
lewisburg:
- Replace LBG_COMMUNITY() by INTEL_COMMUNITY_SIZE()
lynxpoint:
- Convert to use new memeber in struct intel_function
merrifield:
- Convert to use new memeber in struct intel_function
meteorlake:
- Replace MTL_COMMUNITY() by INTEL_COMMUNITY_GPPS()
moorefield:
- Convert to use new memeber in struct intel_function
sunrisepoint:
- Replace SPT_COMMUNITY() by INTEL_COMMUNITY_*()
tigerlake:
- Replace TGL_COMMUNITY() by INTEL_COMMUNITY_GPPS()
- Add pin groups for Video-In channels 4 and 5 on R-Car H3 ES1.x,
- Miscellaneous fixes and improvements.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCY9OikgAKCRCKwlD9ZEnx
cOR6AP44CdQSYTJyvmVXgpAXWOXOi9Sb8qepzd+W8KTRnpKjjwEAsw0s47FX2UKn
42t+ogdLb9eqGezdciNJOsXF5ybJ4Ao=
=NQNh
-----END PGP SIGNATURE-----
Merge tag 'renesas-pinctrl-for-v6.3-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel
pinctrl: renesas: Updates for v6.3
- Add pin groups for Video-In channels 4 and 5 on R-Car H3 ES1.x,
- Miscellaneous fixes and improvements.
The gpio_to_chip() function refers to the global GPIO numberspace
which is a problem we want to get rid of. Get this function out
of the header and open code it into gpiolib with appropriate FIXME
notices so no new users appear in the kernel.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
AT91 pinctrl deferred probing support is broken if the GPIO devices
haven't probed first and set gpio_banks to non-zero. The later condition
that only some GPIO devices haven't probed can't actually happen as
either all the GPIO devices have probed first or none of them have. Plus
the pinctrl driver has already returned -EINVAL, so it's not on the
deferred list to retry probing.
Fix this by consolidating the checking that all GPIO devices are probed.
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-gpio@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Tested-by: Nicolas Ferre <nicolas.ferre@microchip.com> # on sama5d3 xplained
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20180712192222.32481-1-robh@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Added checking of pointer "function" in pcs_set_mux().
pinmux_generic_get_function() can return NULL and the pointer
"function" was dereferenced without checking against NULL.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 571aec4df5 ("pinctrl: single: Use generic pinmux helpers for managing functions")
Signed-off-by: Maxim Korotkov <korotkov.maxim.s@gmail.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20221118104332.943-1-korotkov.maxim.s@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
If one GPIO has debounce enabled but future GPIOs in the list don't
have debounce the time never gets reset and shows wrong value.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20230121134812.16637-2-mario.limonciello@amd.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The function signature is int, but we return a bool. Instead return a
negative errno as the kerneldoc suggests.
Fixes: 4d3d0e4272 ("pinctrl: Add core support for Aspeed SoCs")
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Link: https://lore.kernel.org/r/20230119231856.52014-1-joel@jms.id.au
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Tag the suspend/resume callbacks as __maybe_unused to silence
complaints from the build robots.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add pins, groups, and functions for channels 4 and 5 of the Video Input
Module (VIN) on the Renesas R-Car H3 ES1.x (R8A77950) SoC, based on
the version for the R-Car H3 ES2.0+ (R8A77951) SoC.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/92c9b3b535d27ea7fcc0aa73d298783d710c214a.1673425207.git.geert+renesas@glider.be
Add BUILD_BUG_ON() checks to avoid overflows for GPIO configs for each
supported SoC.
While at it, for readability set n_port_pins based on the GPIO pin configs
and not on GPIO names for r9a07g044_data as done for r9a07g043_data.
Suggested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230102221815.273719-4-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
On the RZ/G2UL SoC we have less number of pins compared to RZ/G2L and also
the pin configs are completely different. This patch makes sure we use the
appropriate pin configs for each SoC (which is passed as part of the OF
data) while configuring the GPIO pin as interrupts instead of using
rzg2l_gpio_configs[] for all the SoCs.
Fixes: bfc69bdbaa ("pinctrl: renesas: rzg2l: Add RZ/G2UL support")
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230102221815.273719-3-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The drive adjustment register definition of gpio13 and gpio81 is wrong:
"the start address for the range" of gpio18 is corrected to 0x000,
"the start bit for the first register within the range" of gpio81 is
corrected to 24.
Fixes: 6cf5e9ef36 ("pinctrl: add pinctrl driver on mt8195")
Signed-off-by: Guodong Liu <Guodong.Liu@mediatek.com>
Link: https://lore.kernel.org/r/20230118062116.26315-1-Guodong.Liu@mediatek.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Coverity spotted that *buf is not initialized to zero in
mtk_pctrl_dbg_show. Using uninitialized variable *buf as argument to %s
when calling seq_printf. Fix this coverity by initializing *buf as zero.
Fixes: 184d8e13f9 ("pinctrl: mediatek: Add support for pin configuration dump via debugfs.")
Signed-off-by: Guodong Liu <Guodong.Liu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230118062036.26258-3-Guodong.Liu@mediatek.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Coverity spotted that pullen and pullup is not initialized to zero in
mtk_pctrl_show_one_pin. The uninitialized variable pullen is used in
assignment statement "rsel = pullen;" in mtk_pctrl_show_one_pin, and
Uninitialized variable pullup is used when calling scnprintf. Fix this
coverity by initializing pullen and pullup as zero.
Fixes: 184d8e13f9 ("pinctrl: mediatek: Add support for pin configuration dump via debugfs.")
Signed-off-by: Guodong Liu <Guodong.Liu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230118062036.26258-2-Guodong.Liu@mediatek.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Yeah, while the ->add_pin_ranges() shouldn't be used by DT drivers,
this one requires it to support quite old firmware descriptions that
do not have gpio-ranges property.
The change allows to clean up GPIO library from OF specifics.
There is no functional change intended.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20230113215352.44272-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
IO mux selection is configured in PMU_GRF_SOC_CON4 and GRF_IOFUNC_SEL0-5
regs on RK3568. pwm0-2 is configured in PMU_GRF reg and the rest is
configured in GRF_IOFUNC regs according to TRM [1].
Update mux route data to reflect this and use proper detection pin for
UART1 IO mux M1.
This fixes HDMITX IO mux M1 selection and makes it possible to enable
HDMI CEC on my Radxa ROCK 3 Model A v1.31 board.
[1] http://opensource.rock-chips.com/images/2/26/Rockchip_RK3568_TRM_Part1_V1.3-20220930P.PDF
Fixes: c0dadc0e47 ("pinctrl: rockchip: add support for rk3568")
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Link: https://lore.kernel.org/r/20230110084636.1141740-1-jonas@kwiboo.se
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The driver doesn't depend on the OF to be complied. Hence
the proper header to use is mod_devicetable.h. Replace of*.h with
the above mentioned and drop redundant dependency.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Link: https://lore.kernel.org/r/20230113143640.24302-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The of_gpio_n_cells default is 2 when ->of_xlate() callback is
not defined. No need to assign it explicitly in the driver.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Link: https://lore.kernel.org/r/20230113143640.24302-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The of_gpio_n_cells default is 2 when ->of_xlate() callback is
not defined. No need to assign it explicitly in the driver.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230112185122.45216-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The of_gpio_n_cells default is 2 when ->of_xlate() callback is
not defined. No need to assign it explicitly in the driver.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230112184923.80442-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The of_gpio_n_cells default is 2 when ->of_xlate() callback is
not defined. No need to assign it explicitly in the driver.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230112184340.79606-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
These variables define a list of functions which can be muxed to the pin
group which the name of the pin group was originally intended to be pointed
out on the name of the said variables.
Therefore, rename "func" to "grp" across all subdrivers where this applies.
Fixes: 18653d4bd8 ("pinctrl: ralink: rename variable names for functions on MT7620 and MT7621")
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Acked-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20221231160849.40544-2-arinc.unal@arinc9.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
When reading pinconf-pins from debugfs it fails to get the configured pull
type on RK3568, "unsupported pinctrl type" error messages is also reported.
Fix this by adding support for RK3568 in rockchip_get_pull, including a
reverse of the pull-up value swap applied in rockchip_set_pull so that
pull-up is correctly reported in pinconf-pins.
Also update the workaround comment to reflect affected pins, GPIO0_D3-D6.
Fixes: c0dadc0e47 ("pinctrl: rockchip: add support for rk3568")
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Jianqun Xu <jay.xu@rock-chips.com>
Link: https://lore.kernel.org/r/20230110172955.1258840-1-jonas@kwiboo.se
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in the probe function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20221118224540.619276-512-uwe@kleine-koenig.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The s3c24xx platform was removed, so this driver has no
remaining users.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
A number of device drivers reference CONFIG_ARM_S3C24XX_CPUFREQ or
similar symbols that are no longer available with the platform gone,
though the drivers themselves are still used on newer platforms,
so remove these hacks.
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
pinctrl_get_group_selector() prints an error message when group
is not found in the list. No need to repeat this in the caller.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230109132719.86009-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in the probe function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20221118224540.619276-511-uwe@kleine-koenig.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add support for the general purpose clocks that are found on MSM8226.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Co-developed-by: Matti Lehtimäki <matti.lehtimaki@gmail.com>
Signed-off-by: Matti Lehtimäki <matti.lehtimaki@gmail.com>
Link: https://lore.kernel.org/r/20230106114403.275865-3-matti.lehtimaki@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
