mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-23 01:10:04 +00:00
483 commits
Author | SHA1 | Message | Date | |
---|---|---|---|---|
![]() |
62b3107073 |
mm_zone: add function to check if managed dma zone exists
Patch series "Handle warning of allocation failure on DMA zone w/o managed pages", v4. **Problem observed: On x86_64, when crash is triggered and entering into kdump kernel, page allocation failure can always be seen. --------------------------------- DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations swapper/0: page allocation failure: order:5, mode:0xcc1(GFP_KERNEL|GFP_DMA), nodemask=(null),cpuset=/,mems_allowed=0 CPU: 0 PID: 1 Comm: swapper/0 Call Trace: dump_stack+0x7f/0xa1 warn_alloc.cold+0x72/0xd6 ...... __alloc_pages+0x24d/0x2c0 ...... dma_atomic_pool_init+0xdb/0x176 do_one_initcall+0x67/0x320 ? rcu_read_lock_sched_held+0x3f/0x80 kernel_init_freeable+0x290/0x2dc ? rest_init+0x24f/0x24f kernel_init+0xa/0x111 ret_from_fork+0x22/0x30 Mem-Info: ------------------------------------ ***Root cause: In the current kernel, it assumes that DMA zone must have managed pages and try to request pages if CONFIG_ZONE_DMA is enabled. While this is not always true. E.g in kdump kernel of x86_64, only low 1M is presented and locked down at very early stage of boot, so that this low 1M won't be added into buddy allocator to become managed pages of DMA zone. This exception will always cause page allocation failure if page is requested from DMA zone. ***Investigation: This failure happens since below commit merged into linus's tree. |
||
![]() |
1b4e3f26f9 |
mm: vmscan: Reduce throttling due to a failure to make progress
Mike Galbraith, Alexey Avramov and Darrick Wong all reported similar problems due to reclaim throttling for excessive lengths of time. In Alexey's case, a memory hog that should go OOM quickly stalls for several minutes before stalling. In Mike and Darrick's cases, a small memcg environment stalled excessively even though the system had enough memory overall. Commit |
||
![]() |
69392a403f |
mm/vmscan: throttle reclaim when no progress is being made
Memcg reclaim throttles on congestion if no reclaim progress is made. This makes little sense, it might be due to writeback or a host of other factors. For !memcg reclaim, it's messy. Direct reclaim primarily is throttled in the page allocator if it is failing to make progress. Kswapd throttles if too many pages are under writeback and marked for immediate reclaim. This patch explicitly throttles if reclaim is failing to make progress. [vbabka@suse.cz: Remove redundant code] Link: https://lkml.kernel.org/r/20211022144651.19914-4-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: "Darrick J . Wong" <djwong@kernel.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: NeilBrown <neilb@suse.de> Cc: Rik van Riel <riel@surriel.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
![]() |
d818fca1ca |
mm/vmscan: throttle reclaim and compaction when too may pages are isolated
Page reclaim throttles on congestion if too many parallel reclaim instances have isolated too many pages. This makes no sense, excessive parallelisation has nothing to do with writeback or congestion. This patch creates an additional workqueue to sleep on when too many pages are isolated. The throttled tasks are woken when the number of isolated pages is reduced or a timeout occurs. There may be some false positive wakeups for GFP_NOIO/GFP_NOFS callers but the tasks will throttle again if necessary. [shy828301@gmail.com: Wake up from compaction context] [vbabka@suse.cz: Account number of throttled tasks only for writeback] Link: https://lkml.kernel.org/r/20211022144651.19914-3-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: "Darrick J . Wong" <djwong@kernel.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: NeilBrown <neilb@suse.de> Cc: Rik van Riel <riel@surriel.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
![]() |
8cd7c588de |
mm/vmscan: throttle reclaim until some writeback completes if congested
Patch series "Remove dependency on congestion_wait in mm/", v5. This series that removes all calls to congestion_wait in mm/ and deletes wait_iff_congested. It's not a clever implementation but congestion_wait has been broken for a long time [1]. Even if congestion throttling worked, it was never a great idea. While excessive dirty/writeback pages at the tail of the LRU is one possibility that reclaim may be slow, there is also the problem of too many pages being isolated and reclaim failing for other reasons (elevated references, too many pages isolated, excessive LRU contention etc). This series replaces the "congestion" throttling with 3 different types. - If there are too many dirty/writeback pages, sleep until a timeout or enough pages get cleaned - If too many pages are isolated, sleep until enough isolated pages are either reclaimed or put back on the LRU - If no progress is being made, direct reclaim tasks sleep until another task makes progress with acceptable efficiency. This was initially tested with a mix of workloads that used to trigger corner cases that no longer work. A new test case was created called "stutterp" (pagereclaim-stutterp-noreaders in mmtests) using a freshly created XFS filesystem. Note that it may be necessary to increase the timeout of ssh if executing remotely as ssh itself can get throttled and the connection may timeout. stutterp varies the number of "worker" processes from 4 up to NR_CPUS*4 to check the impact as the number of direct reclaimers increase. It has four types of worker. - One "anon latency" worker creates small mappings with mmap() and times how long it takes to fault the mapping reading it 4K at a time - X file writers which is fio randomly writing X files where the total size of the files add up to the allowed dirty_ratio. fio is allowed to run for a warmup period to allow some file-backed pages to accumulate. The duration of the warmup is based on the best-case linear write speed of the storage. - Y file readers which is fio randomly reading small files - Z anon memory hogs which continually map (100-dirty_ratio)% of memory - Total estimated WSS = (100+dirty_ration) percentage of memory X+Y+Z+1 == NR_WORKERS varying from 4 up to NR_CPUS*4 The intent is to maximise the total WSS with a mix of file and anon memory where some anonymous memory must be swapped and there is a high likelihood of dirty/writeback pages reaching the end of the LRU. The test can be configured to have no background readers to stress dirty/writeback pages. The results below are based on having zero readers. The short summary of the results is that the series works and stalls until some event occurs but the timeouts may need adjustment. The test results are not broken down by patch as the series should be treated as one block that replaces a broken throttling mechanism with a working one. Finally, three machines were tested but I'm reporting the worst set of results. The other two machines had much better latencies for example. First the results of the "anon latency" latency stutterp 5.15.0-rc1 5.15.0-rc1 vanilla mm-reclaimcongest-v5r4 Amean mmap-4 31.4003 ( 0.00%) 2661.0198 (-8374.52%) Amean mmap-7 38.1641 ( 0.00%) 149.2891 (-291.18%) Amean mmap-12 60.0981 ( 0.00%) 187.8105 (-212.51%) Amean mmap-21 161.2699 ( 0.00%) 213.9107 ( -32.64%) Amean mmap-30 174.5589 ( 0.00%) 377.7548 (-116.41%) Amean mmap-48 8106.8160 ( 0.00%) 1070.5616 ( 86.79%) Stddev mmap-4 41.3455 ( 0.00%) 27573.9676 (-66591.66%) Stddev mmap-7 53.5556 ( 0.00%) 4608.5860 (-8505.23%) Stddev mmap-12 171.3897 ( 0.00%) 5559.4542 (-3143.75%) Stddev mmap-21 1506.6752 ( 0.00%) 5746.2507 (-281.39%) Stddev mmap-30 557.5806 ( 0.00%) 7678.1624 (-1277.05%) Stddev mmap-48 61681.5718 ( 0.00%) 14507.2830 ( 76.48%) Max-90 mmap-4 31.4243 ( 0.00%) 83.1457 (-164.59%) Max-90 mmap-7 41.0410 ( 0.00%) 41.0720 ( -0.08%) Max-90 mmap-12 66.5255 ( 0.00%) 53.9073 ( 18.97%) Max-90 mmap-21 146.7479 ( 0.00%) 105.9540 ( 27.80%) Max-90 mmap-30 193.9513 ( 0.00%) 64.3067 ( 66.84%) Max-90 mmap-48 277.9137 ( 0.00%) 591.0594 (-112.68%) Max mmap-4 1913.8009 ( 0.00%) 299623.9695 (-15555.96%) Max mmap-7 2423.9665 ( 0.00%) 204453.1708 (-8334.65%) Max mmap-12 6845.6573 ( 0.00%) 221090.3366 (-3129.64%) Max mmap-21 56278.6508 ( 0.00%) 213877.3496 (-280.03%) Max mmap-30 19716.2990 ( 0.00%) 216287.6229 (-997.00%) Max mmap-48 477923.9400 ( 0.00%) 245414.8238 ( 48.65%) For most thread counts, the time to mmap() is unfortunately increased. In earlier versions of the series, this was lower but a large number of throttling events were reaching their timeout increasing the amount of inefficient scanning of the LRU. There is no prioritisation of reclaim tasks making progress based on each tasks rate of page allocation versus progress of reclaim. The variance is also impacted for high worker counts but in all cases, the differences in latency are not statistically significant due to very large maximum outliers. Max-90 shows that 90% of the stalls are comparable but the Max results show the massive outliers which are increased to to stalling. It is expected that this will be very machine dependant. Due to the test design, reclaim is difficult so allocations stall and there are variances depending on whether THPs can be allocated or not. The amount of memory will affect exactly how bad the corner cases are and how often they trigger. The warmup period calculation is not ideal as it's based on linear writes where as fio is randomly writing multiple files from multiple tasks so the start state of the test is variable. For example, these are the latencies on a single-socket machine that had more memory Amean mmap-4 42.2287 ( 0.00%) 49.6838 * -17.65%* Amean mmap-7 216.4326 ( 0.00%) 47.4451 * 78.08%* Amean mmap-12 2412.0588 ( 0.00%) 51.7497 ( 97.85%) Amean mmap-21 5546.2548 ( 0.00%) 51.8862 ( 99.06%) Amean mmap-30 1085.3121 ( 0.00%) 72.1004 ( 93.36%) The overall system CPU usage and elapsed time is as follows 5.15.0-rc3 5.15.0-rc3 vanilla mm-reclaimcongest-v5r4 Duration User 6989.03 983.42 Duration System 7308.12 799.68 Duration Elapsed 2277.67 2092.98 The patches reduce system CPU usage by 89% as the vanilla kernel is rarely stalling. The high-level /proc/vmstats show 5.15.0-rc1 5.15.0-rc1 vanilla mm-reclaimcongest-v5r2 Ops Direct pages scanned 1056608451.00 503594991.00 Ops Kswapd pages scanned 109795048.00 147289810.00 Ops Kswapd pages reclaimed 63269243.00 31036005.00 Ops Direct pages reclaimed 10803973.00 6328887.00 Ops Kswapd efficiency % 57.62 21.07 Ops Kswapd velocity 48204.98 57572.86 Ops Direct efficiency % 1.02 1.26 Ops Direct velocity 463898.83 196845.97 Kswapd scanned less pages but the detailed pattern is different. The vanilla kernel scans slowly over time where as the patches exhibits burst patterns of scan activity. Direct reclaim scanning is reduced by 52% due to stalling. The pattern for stealing pages is also slightly different. Both kernels exhibit spikes but the vanilla kernel when reclaiming shows pages being reclaimed over a period of time where as the patches tend to reclaim in spikes. The difference is that vanilla is not throttling and instead scanning constantly finding some pages over time where as the patched kernel throttles and reclaims in spikes. Ops Percentage direct scans 90.59 77.37 For direct reclaim, vanilla scanned 90.59% of pages where as with the patches, 77.37% were direct reclaim due to throttling Ops Page writes by reclaim 2613590.00 1687131.00 Page writes from reclaim context are reduced. Ops Page writes anon 2932752.00 1917048.00 And there is less swapping. Ops Page reclaim immediate 996248528.00 107664764.00 The number of pages encountered at the tail of the LRU tagged for immediate reclaim but still dirty/writeback is reduced by 89%. Ops Slabs scanned 164284.00 153608.00 Slab scan activity is similar. ftrace was used to gather stall activity Vanilla ------- 1 writeback_wait_iff_congested: usec_timeout=100000 usec_delayed=16000 2 writeback_wait_iff_congested: usec_timeout=100000 usec_delayed=12000 8 writeback_wait_iff_congested: usec_timeout=100000 usec_delayed=8000 29 writeback_wait_iff_congested: usec_timeout=100000 usec_delayed=4000 82394 writeback_wait_iff_congested: usec_timeout=100000 usec_delayed=0 The fast majority of wait_iff_congested calls do not stall at all. What is likely happening is that cond_resched() reschedules the task for a short period when the BDI is not registering congestion (which it never will in this test setup). 1 writeback_congestion_wait: usec_timeout=100000 usec_delayed=120000 2 writeback_congestion_wait: usec_timeout=100000 usec_delayed=132000 4 writeback_congestion_wait: usec_timeout=100000 usec_delayed=112000 380 writeback_congestion_wait: usec_timeout=100000 usec_delayed=108000 778 writeback_congestion_wait: usec_timeout=100000 usec_delayed=104000 congestion_wait if called always exceeds the timeout as there is no trigger to wake it up. Bottom line: Vanilla will throttle but it's not effective. Patch series ------------ Kswapd throttle activity was always due to scanning pages tagged for immediate reclaim at the tail of the LRU 1 usec_timeout=100000 usect_delayed=72000 reason=VMSCAN_THROTTLE_WRITEBACK 4 usec_timeout=100000 usect_delayed=20000 reason=VMSCAN_THROTTLE_WRITEBACK 5 usec_timeout=100000 usect_delayed=12000 reason=VMSCAN_THROTTLE_WRITEBACK 6 usec_timeout=100000 usect_delayed=16000 reason=VMSCAN_THROTTLE_WRITEBACK 11 usec_timeout=100000 usect_delayed=100000 reason=VMSCAN_THROTTLE_WRITEBACK 11 usec_timeout=100000 usect_delayed=8000 reason=VMSCAN_THROTTLE_WRITEBACK 94 usec_timeout=100000 usect_delayed=0 reason=VMSCAN_THROTTLE_WRITEBACK 112 usec_timeout=100000 usect_delayed=4000 reason=VMSCAN_THROTTLE_WRITEBACK The majority of events did not stall or stalled for a short period. Roughly 16% of stalls reached the timeout before expiry. For direct reclaim, the number of times stalled for each reason were 6624 reason=VMSCAN_THROTTLE_ISOLATED 93246 reason=VMSCAN_THROTTLE_NOPROGRESS 96934 reason=VMSCAN_THROTTLE_WRITEBACK The most common reason to stall was due to excessive pages tagged for immediate reclaim at the tail of the LRU followed by a failure to make forward. A relatively small number were due to too many pages isolated from the LRU by parallel threads For VMSCAN_THROTTLE_ISOLATED, the breakdown of delays was 9 usec_timeout=20000 usect_delayed=4000 reason=VMSCAN_THROTTLE_ISOLATED 12 usec_timeout=20000 usect_delayed=16000 reason=VMSCAN_THROTTLE_ISOLATED 83 usec_timeout=20000 usect_delayed=20000 reason=VMSCAN_THROTTLE_ISOLATED 6520 usec_timeout=20000 usect_delayed=0 reason=VMSCAN_THROTTLE_ISOLATED Most did not stall at all. A small number reached the timeout. For VMSCAN_THROTTLE_NOPROGRESS, the breakdown of stalls were all over the map 1 usec_timeout=500000 usect_delayed=324000 reason=VMSCAN_THROTTLE_NOPROGRESS 1 usec_timeout=500000 usect_delayed=332000 reason=VMSCAN_THROTTLE_NOPROGRESS 1 usec_timeout=500000 usect_delayed=348000 reason=VMSCAN_THROTTLE_NOPROGRESS 1 usec_timeout=500000 usect_delayed=360000 reason=VMSCAN_THROTTLE_NOPROGRESS 2 usec_timeout=500000 usect_delayed=228000 reason=VMSCAN_THROTTLE_NOPROGRESS 2 usec_timeout=500000 usect_delayed=260000 reason=VMSCAN_THROTTLE_NOPROGRESS 2 usec_timeout=500000 usect_delayed=340000 reason=VMSCAN_THROTTLE_NOPROGRESS 2 usec_timeout=500000 usect_delayed=364000 reason=VMSCAN_THROTTLE_NOPROGRESS 2 usec_timeout=500000 usect_delayed=372000 reason=VMSCAN_THROTTLE_NOPROGRESS 2 usec_timeout=500000 usect_delayed=428000 reason=VMSCAN_THROTTLE_NOPROGRESS 2 usec_timeout=500000 usect_delayed=460000 reason=VMSCAN_THROTTLE_NOPROGRESS 2 usec_timeout=500000 usect_delayed=464000 reason=VMSCAN_THROTTLE_NOPROGRESS 3 usec_timeout=500000 usect_delayed=244000 reason=VMSCAN_THROTTLE_NOPROGRESS 3 usec_timeout=500000 usect_delayed=252000 reason=VMSCAN_THROTTLE_NOPROGRESS 3 usec_timeout=500000 usect_delayed=272000 reason=VMSCAN_THROTTLE_NOPROGRESS 4 usec_timeout=500000 usect_delayed=188000 reason=VMSCAN_THROTTLE_NOPROGRESS 4 usec_timeout=500000 usect_delayed=268000 reason=VMSCAN_THROTTLE_NOPROGRESS 4 usec_timeout=500000 usect_delayed=328000 reason=VMSCAN_THROTTLE_NOPROGRESS 4 usec_timeout=500000 usect_delayed=380000 reason=VMSCAN_THROTTLE_NOPROGRESS 4 usec_timeout=500000 usect_delayed=392000 reason=VMSCAN_THROTTLE_NOPROGRESS 4 usec_timeout=500000 usect_delayed=432000 reason=VMSCAN_THROTTLE_NOPROGRESS 5 usec_timeout=500000 usect_delayed=204000 reason=VMSCAN_THROTTLE_NOPROGRESS 5 usec_timeout=500000 usect_delayed=220000 reason=VMSCAN_THROTTLE_NOPROGRESS 5 usec_timeout=500000 usect_delayed=412000 reason=VMSCAN_THROTTLE_NOPROGRESS 5 usec_timeout=500000 usect_delayed=436000 reason=VMSCAN_THROTTLE_NOPROGRESS 6 usec_timeout=500000 usect_delayed=488000 reason=VMSCAN_THROTTLE_NOPROGRESS 7 usec_timeout=500000 usect_delayed=212000 reason=VMSCAN_THROTTLE_NOPROGRESS 7 usec_timeout=500000 usect_delayed=300000 reason=VMSCAN_THROTTLE_NOPROGRESS 7 usec_timeout=500000 usect_delayed=316000 reason=VMSCAN_THROTTLE_NOPROGRESS 7 usec_timeout=500000 usect_delayed=472000 reason=VMSCAN_THROTTLE_NOPROGRESS 8 usec_timeout=500000 usect_delayed=248000 reason=VMSCAN_THROTTLE_NOPROGRESS 8 usec_timeout=500000 usect_delayed=356000 reason=VMSCAN_THROTTLE_NOPROGRESS 8 usec_timeout=500000 usect_delayed=456000 reason=VMSCAN_THROTTLE_NOPROGRESS 9 usec_timeout=500000 usect_delayed=124000 reason=VMSCAN_THROTTLE_NOPROGRESS 9 usec_timeout=500000 usect_delayed=376000 reason=VMSCAN_THROTTLE_NOPROGRESS 9 usec_timeout=500000 usect_delayed=484000 reason=VMSCAN_THROTTLE_NOPROGRESS 10 usec_timeout=500000 usect_delayed=172000 reason=VMSCAN_THROTTLE_NOPROGRESS 10 usec_timeout=500000 usect_delayed=420000 reason=VMSCAN_THROTTLE_NOPROGRESS 10 usec_timeout=500000 usect_delayed=452000 reason=VMSCAN_THROTTLE_NOPROGRESS 11 usec_timeout=500000 usect_delayed=256000 reason=VMSCAN_THROTTLE_NOPROGRESS 12 usec_timeout=500000 usect_delayed=112000 reason=VMSCAN_THROTTLE_NOPROGRESS 12 usec_timeout=500000 usect_delayed=116000 reason=VMSCAN_THROTTLE_NOPROGRESS 12 usec_timeout=500000 usect_delayed=144000 reason=VMSCAN_THROTTLE_NOPROGRESS 12 usec_timeout=500000 usect_delayed=152000 reason=VMSCAN_THROTTLE_NOPROGRESS 12 usec_timeout=500000 usect_delayed=264000 reason=VMSCAN_THROTTLE_NOPROGRESS 12 usec_timeout=500000 usect_delayed=384000 reason=VMSCAN_THROTTLE_NOPROGRESS 12 usec_timeout=500000 usect_delayed=424000 reason=VMSCAN_THROTTLE_NOPROGRESS 12 usec_timeout=500000 usect_delayed=492000 reason=VMSCAN_THROTTLE_NOPROGRESS 13 usec_timeout=500000 usect_delayed=184000 reason=VMSCAN_THROTTLE_NOPROGRESS 13 usec_timeout=500000 usect_delayed=444000 reason=VMSCAN_THROTTLE_NOPROGRESS 14 usec_timeout=500000 usect_delayed=308000 reason=VMSCAN_THROTTLE_NOPROGRESS 14 usec_timeout=500000 usect_delayed=440000 reason=VMSCAN_THROTTLE_NOPROGRESS 14 usec_timeout=500000 usect_delayed=476000 reason=VMSCAN_THROTTLE_NOPROGRESS 16 usec_timeout=500000 usect_delayed=140000 reason=VMSCAN_THROTTLE_NOPROGRESS 17 usec_timeout=500000 usect_delayed=232000 reason=VMSCAN_THROTTLE_NOPROGRESS 17 usec_timeout=500000 usect_delayed=240000 reason=VMSCAN_THROTTLE_NOPROGRESS 17 usec_timeout=500000 usect_delayed=280000 reason=VMSCAN_THROTTLE_NOPROGRESS 18 usec_timeout=500000 usect_delayed=404000 reason=VMSCAN_THROTTLE_NOPROGRESS 20 usec_timeout=500000 usect_delayed=148000 reason=VMSCAN_THROTTLE_NOPROGRESS 20 usec_timeout=500000 usect_delayed=216000 reason=VMSCAN_THROTTLE_NOPROGRESS 20 usec_timeout=500000 usect_delayed=468000 reason=VMSCAN_THROTTLE_NOPROGRESS 21 usec_timeout=500000 usect_delayed=448000 reason=VMSCAN_THROTTLE_NOPROGRESS 23 usec_timeout=500000 usect_delayed=168000 reason=VMSCAN_THROTTLE_NOPROGRESS 23 usec_timeout=500000 usect_delayed=296000 reason=VMSCAN_THROTTLE_NOPROGRESS 25 usec_timeout=500000 usect_delayed=132000 reason=VMSCAN_THROTTLE_NOPROGRESS 25 usec_timeout=500000 usect_delayed=352000 reason=VMSCAN_THROTTLE_NOPROGRESS 26 usec_timeout=500000 usect_delayed=180000 reason=VMSCAN_THROTTLE_NOPROGRESS 27 usec_timeout=500000 usect_delayed=284000 reason=VMSCAN_THROTTLE_NOPROGRESS 28 usec_timeout=500000 usect_delayed=164000 reason=VMSCAN_THROTTLE_NOPROGRESS 29 usec_timeout=500000 usect_delayed=136000 reason=VMSCAN_THROTTLE_NOPROGRESS 30 usec_timeout=500000 usect_delayed=200000 reason=VMSCAN_THROTTLE_NOPROGRESS 30 usec_timeout=500000 usect_delayed=400000 reason=VMSCAN_THROTTLE_NOPROGRESS 31 usec_timeout=500000 usect_delayed=196000 reason=VMSCAN_THROTTLE_NOPROGRESS 32 usec_timeout=500000 usect_delayed=156000 reason=VMSCAN_THROTTLE_NOPROGRESS 33 usec_timeout=500000 usect_delayed=224000 reason=VMSCAN_THROTTLE_NOPROGRESS 35 usec_timeout=500000 usect_delayed=128000 reason=VMSCAN_THROTTLE_NOPROGRESS 35 usec_timeout=500000 usect_delayed=176000 reason=VMSCAN_THROTTLE_NOPROGRESS 36 usec_timeout=500000 usect_delayed=368000 reason=VMSCAN_THROTTLE_NOPROGRESS 36 usec_timeout=500000 usect_delayed=496000 reason=VMSCAN_THROTTLE_NOPROGRESS 37 usec_timeout=500000 usect_delayed=312000 reason=VMSCAN_THROTTLE_NOPROGRESS 38 usec_timeout=500000 usect_delayed=304000 reason=VMSCAN_THROTTLE_NOPROGRESS 40 usec_timeout=500000 usect_delayed=288000 reason=VMSCAN_THROTTLE_NOPROGRESS 43 usec_timeout=500000 usect_delayed=408000 reason=VMSCAN_THROTTLE_NOPROGRESS 55 usec_timeout=500000 usect_delayed=416000 reason=VMSCAN_THROTTLE_NOPROGRESS 56 usec_timeout=500000 usect_delayed=76000 reason=VMSCAN_THROTTLE_NOPROGRESS 58 usec_timeout=500000 usect_delayed=120000 reason=VMSCAN_THROTTLE_NOPROGRESS 59 usec_timeout=500000 usect_delayed=208000 reason=VMSCAN_THROTTLE_NOPROGRESS 61 usec_timeout=500000 usect_delayed=68000 reason=VMSCAN_THROTTLE_NOPROGRESS 71 usec_timeout=500000 usect_delayed=192000 reason=VMSCAN_THROTTLE_NOPROGRESS 71 usec_timeout=500000 usect_delayed=480000 reason=VMSCAN_THROTTLE_NOPROGRESS 79 usec_timeout=500000 usect_delayed=60000 reason=VMSCAN_THROTTLE_NOPROGRESS 82 usec_timeout=500000 usect_delayed=320000 reason=VMSCAN_THROTTLE_NOPROGRESS 82 usec_timeout=500000 usect_delayed=92000 reason=VMSCAN_THROTTLE_NOPROGRESS 85 usec_timeout=500000 usect_delayed=64000 reason=VMSCAN_THROTTLE_NOPROGRESS 85 usec_timeout=500000 usect_delayed=80000 reason=VMSCAN_THROTTLE_NOPROGRESS 88 usec_timeout=500000 usect_delayed=84000 reason=VMSCAN_THROTTLE_NOPROGRESS 90 usec_timeout=500000 usect_delayed=160000 reason=VMSCAN_THROTTLE_NOPROGRESS 90 usec_timeout=500000 usect_delayed=292000 reason=VMSCAN_THROTTLE_NOPROGRESS 94 usec_timeout=500000 usect_delayed=56000 reason=VMSCAN_THROTTLE_NOPROGRESS 118 usec_timeout=500000 usect_delayed=88000 reason=VMSCAN_THROTTLE_NOPROGRESS 119 usec_timeout=500000 usect_delayed=72000 reason=VMSCAN_THROTTLE_NOPROGRESS 126 usec_timeout=500000 usect_delayed=108000 reason=VMSCAN_THROTTLE_NOPROGRESS 146 usec_timeout=500000 usect_delayed=52000 reason=VMSCAN_THROTTLE_NOPROGRESS 148 usec_timeout=500000 usect_delayed=36000 reason=VMSCAN_THROTTLE_NOPROGRESS 148 usec_timeout=500000 usect_delayed=48000 reason=VMSCAN_THROTTLE_NOPROGRESS 159 usec_timeout=500000 usect_delayed=28000 reason=VMSCAN_THROTTLE_NOPROGRESS 178 usec_timeout=500000 usect_delayed=44000 reason=VMSCAN_THROTTLE_NOPROGRESS 183 usec_timeout=500000 usect_delayed=40000 reason=VMSCAN_THROTTLE_NOPROGRESS 237 usec_timeout=500000 usect_delayed=100000 reason=VMSCAN_THROTTLE_NOPROGRESS 266 usec_timeout=500000 usect_delayed=32000 reason=VMSCAN_THROTTLE_NOPROGRESS 313 usec_timeout=500000 usect_delayed=24000 reason=VMSCAN_THROTTLE_NOPROGRESS 347 usec_timeout=500000 usect_delayed=96000 reason=VMSCAN_THROTTLE_NOPROGRESS 470 usec_timeout=500000 usect_delayed=20000 reason=VMSCAN_THROTTLE_NOPROGRESS 559 usec_timeout=500000 usect_delayed=16000 reason=VMSCAN_THROTTLE_NOPROGRESS 964 usec_timeout=500000 usect_delayed=12000 reason=VMSCAN_THROTTLE_NOPROGRESS 2001 usec_timeout=500000 usect_delayed=104000 reason=VMSCAN_THROTTLE_NOPROGRESS 2447 usec_timeout=500000 usect_delayed=8000 reason=VMSCAN_THROTTLE_NOPROGRESS 7888 usec_timeout=500000 usect_delayed=4000 reason=VMSCAN_THROTTLE_NOPROGRESS 22727 usec_timeout=500000 usect_delayed=0 reason=VMSCAN_THROTTLE_NOPROGRESS 51305 usec_timeout=500000 usect_delayed=500000 reason=VMSCAN_THROTTLE_NOPROGRESS The full timeout is often hit but a large number also do not stall at all. The remainder slept a little allowing other reclaim tasks to make progress. While this timeout could be further increased, it could also negatively impact worst-case behaviour when there is no prioritisation of what task should make progress. For VMSCAN_THROTTLE_WRITEBACK, the breakdown was 1 usec_timeout=100000 usect_delayed=44000 reason=VMSCAN_THROTTLE_WRITEBACK 2 usec_timeout=100000 usect_delayed=76000 reason=VMSCAN_THROTTLE_WRITEBACK 3 usec_timeout=100000 usect_delayed=80000 reason=VMSCAN_THROTTLE_WRITEBACK 5 usec_timeout=100000 usect_delayed=48000 reason=VMSCAN_THROTTLE_WRITEBACK 5 usec_timeout=100000 usect_delayed=84000 reason=VMSCAN_THROTTLE_WRITEBACK 6 usec_timeout=100000 usect_delayed=72000 reason=VMSCAN_THROTTLE_WRITEBACK 7 usec_timeout=100000 usect_delayed=88000 reason=VMSCAN_THROTTLE_WRITEBACK 11 usec_timeout=100000 usect_delayed=56000 reason=VMSCAN_THROTTLE_WRITEBACK 12 usec_timeout=100000 usect_delayed=64000 reason=VMSCAN_THROTTLE_WRITEBACK 16 usec_timeout=100000 usect_delayed=92000 reason=VMSCAN_THROTTLE_WRITEBACK 24 usec_timeout=100000 usect_delayed=68000 reason=VMSCAN_THROTTLE_WRITEBACK 28 usec_timeout=100000 usect_delayed=32000 reason=VMSCAN_THROTTLE_WRITEBACK 30 usec_timeout=100000 usect_delayed=60000 reason=VMSCAN_THROTTLE_WRITEBACK 30 usec_timeout=100000 usect_delayed=96000 reason=VMSCAN_THROTTLE_WRITEBACK 32 usec_timeout=100000 usect_delayed=52000 reason=VMSCAN_THROTTLE_WRITEBACK 42 usec_timeout=100000 usect_delayed=40000 reason=VMSCAN_THROTTLE_WRITEBACK 77 usec_timeout=100000 usect_delayed=28000 reason=VMSCAN_THROTTLE_WRITEBACK 99 usec_timeout=100000 usect_delayed=36000 reason=VMSCAN_THROTTLE_WRITEBACK 137 usec_timeout=100000 usect_delayed=24000 reason=VMSCAN_THROTTLE_WRITEBACK 190 usec_timeout=100000 usect_delayed=20000 reason=VMSCAN_THROTTLE_WRITEBACK 339 usec_timeout=100000 usect_delayed=16000 reason=VMSCAN_THROTTLE_WRITEBACK 518 usec_timeout=100000 usect_delayed=12000 reason=VMSCAN_THROTTLE_WRITEBACK 852 usec_timeout=100000 usect_delayed=8000 reason=VMSCAN_THROTTLE_WRITEBACK 3359 usec_timeout=100000 usect_delayed=4000 reason=VMSCAN_THROTTLE_WRITEBACK 7147 usec_timeout=100000 usect_delayed=0 reason=VMSCAN_THROTTLE_WRITEBACK 83962 usec_timeout=100000 usect_delayed=100000 reason=VMSCAN_THROTTLE_WRITEBACK The majority hit the timeout in direct reclaim context although a sizable number did not stall at all. This is very different to kswapd where only a tiny percentage of stalls due to writeback reached the timeout. Bottom line, the throttling appears to work and the wakeup events may limit worst case stalls. There might be some grounds for adjusting timeouts but it's likely futile as the worst-case scenarios depend on the workload, memory size and the speed of the storage. A better approach to improve the series further would be to prioritise tasks based on their rate of allocation with the caveat that it may be very expensive to track. This patch (of 5): Page reclaim throttles on wait_iff_congested under the following conditions: - kswapd is encountering pages under writeback and marked for immediate reclaim implying that pages are cycling through the LRU faster than pages can be cleaned. - Direct reclaim will stall if all dirty pages are backed by congested inodes. wait_iff_congested is almost completely broken with few exceptions. This patch adds a new node-based workqueue and tracks the number of throttled tasks and pages written back since throttling started. If enough pages belonging to the node are written back then the throttled tasks will wake early. If not, the throttled tasks sleeps until the timeout expires. [neilb@suse.de: Uninterruptible sleep and simpler wakeups] [hdanton@sina.com: Avoid race when reclaim starts] [vbabka@suse.cz: vmstat irq-safe api, clarifications] Link: https://lore.kernel.org/linux-mm/45d8b7a6-8548-65f5-cccf-9f451d4ae3d4@kernel.dk/ [1] Link: https://lkml.kernel.org/r/20211022144651.19914-1-mgorman@techsingularity.net Link: https://lkml.kernel.org/r/20211022144651.19914-2-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: NeilBrown <neilb@suse.de> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: "Darrick J . Wong" <djwong@kernel.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Rik van Riel <riel@surriel.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
![]() |
8ca1b5a498 |
mm/page_alloc: detect allocation forbidden by cpuset and bail out early
There was a report that starting an Ubuntu in docker while using cpuset to bind it to movable nodes (a node only has movable zone, like a node for hotplug or a Persistent Memory node in normal usage) will fail due to memory allocation failure, and then OOM is involved and many other innocent processes got killed. It can be reproduced with command: $ docker run -it --rm --cpuset-mems 4 ubuntu:latest bash -c "grep Mems_allowed /proc/self/status" (where node 4 is a movable node) runc:[2:INIT] invoked oom-killer: gfp_mask=0x500cc2(GFP_HIGHUSER|__GFP_ACCOUNT), order=0, oom_score_adj=0 CPU: 8 PID: 8291 Comm: runc:[2:INIT] Tainted: G W I E 5.8.2-0.g71b519a-default #1 openSUSE Tumbleweed (unreleased) Hardware name: Dell Inc. PowerEdge R640/0PHYDR, BIOS 2.6.4 04/09/2020 Call Trace: dump_stack+0x6b/0x88 dump_header+0x4a/0x1e2 oom_kill_process.cold+0xb/0x10 out_of_memory.part.0+0xaf/0x230 out_of_memory+0x3d/0x80 __alloc_pages_slowpath.constprop.0+0x954/0xa20 __alloc_pages_nodemask+0x2d3/0x300 pipe_write+0x322/0x590 new_sync_write+0x196/0x1b0 vfs_write+0x1c3/0x1f0 ksys_write+0xa7/0xe0 do_syscall_64+0x52/0xd0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Mem-Info: active_anon:392832 inactive_anon:182 isolated_anon:0 active_file:68130 inactive_file:151527 isolated_file:0 unevictable:2701 dirty:0 writeback:7 slab_reclaimable:51418 slab_unreclaimable:116300 mapped:45825 shmem:735 pagetables:2540 bounce:0 free:159849484 free_pcp:73 free_cma:0 Node 4 active_anon:1448kB inactive_anon:0kB active_file:0kB inactive_file:0kB unevictable:0kB isolated(anon):0kB isolated(file):0kB mapped:0kB dirty:0kB writeback:0kB shmem:0kB shmem_thp: 0kB shmem_pmdmapped: 0kB anon_thp: 0kB writeback_tmp:0kB all_unreclaimable? no Node 4 Movable free:130021408kB min:9140kB low:139160kB high:269180kB reserved_highatomic:0KB active_anon:1448kB inactive_anon:0kB active_file:0kB inactive_file:0kB unevictable:0kB writepending:0kB present:130023424kB managed:130023424kB mlocked:0kB kernel_stack:0kB pagetables:0kB bounce:0kB free_pcp:292kB local_pcp:84kB free_cma:0kB lowmem_reserve[]: 0 0 0 0 0 Node 4 Movable: 1*4kB (M) 0*8kB 0*16kB 1*32kB (M) 0*64kB 0*128kB 1*256kB (M) 1*512kB (M) 1*1024kB (M) 0*2048kB 31743*4096kB (M) = 130021156kB oom-kill:constraint=CONSTRAINT_CPUSET,nodemask=(null),cpuset=docker-9976a269caec812c134fa317f27487ee36e1129beba7278a463dd53e5fb9997b.scope,mems_allowed=4,global_oom,task_memcg=/system.slice/containerd.service,task=containerd,pid=4100,uid=0 Out of memory: Killed process 4100 (containerd) total-vm:4077036kB, anon-rss:51184kB, file-rss:26016kB, shmem-rss:0kB, UID:0 pgtables:676kB oom_score_adj:0 oom_reaper: reaped process 8248 (docker), now anon-rss:0kB, file-rss:0kB, shmem-rss:0kB oom_reaper: reaped process 2054 (node_exporter), now anon-rss:0kB, file-rss:0kB, shmem-rss:0kB oom_reaper: reaped process 1452 (systemd-journal), now anon-rss:0kB, file-rss:8564kB, shmem-rss:4kB oom_reaper: reaped process 2146 (munin-node), now anon-rss:0kB, file-rss:0kB, shmem-rss:0kB oom_reaper: reaped process 8291 (runc:[2:INIT]), now anon-rss:0kB, file-rss:0kB, shmem-rss:0kB The reason is that in this case, the target cpuset nodes only have movable zone, while the creation of an OS in docker sometimes needs to allocate memory in non-movable zones (dma/dma32/normal) like GFP_HIGHUSER, and the cpuset limit forbids the allocation, then out-of-memory killing is involved even when normal nodes and movable nodes both have many free memory. The OOM killer cannot help to resolve the situation as there is no usable memory for the request in the cpuset scope. The only reasonable measure to take is to fail the allocation right away and have the caller to deal with it. So add a check for cases like this in the slowpath of allocation, and bail out early returning NULL for the allocation. As page allocation is one of the hottest path in kernel, this check will hurt all users with sane cpuset configuration, add a static branch check and detect the abnormal config in cpuset memory binding setup so that the extra check cost in page allocation is not paid by everyone. [thanks to Micho Hocko and David Rientjes for suggesting not handling it inside OOM code, adding cpuset check, refining comments] Link: https://lkml.kernel.org/r/1632481657-68112-1-git-send-email-feng.tang@intel.com Signed-off-by: Feng Tang <feng.tang@intel.com> Suggested-by: Michal Hocko <mhocko@suse.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: David Rientjes <rientjes@google.com> Cc: Tejun Heo <tj@kernel.org> Cc: Zefan Li <lizefan.x@bytedance.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
![]() |
f1dc0db296 |
mm: use __pfn_to_section() instead of open coding it
It is defined in the same file just a few lines above. Link: https://lkml.kernel.org/r/4598487.Rc0NezkW7i@mobilepool36.emlix.com Signed-off-by: Rolf Eike Beer <eb@emlix.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
![]() |
2d338201d5 |
Merge branch 'akpm' (patches from Andrew)
Merge more updates from Andrew Morton:
"147 patches, based on
|
||
![]() |
4b09700244 |
mm: track present early pages per zone
Patch series "mm/memory_hotplug: "auto-movable" online policy and memory groups", v3. I. Goal The goal of this series is improving in-kernel auto-online support. It tackles the fundamental problems that: 1) We can create zone imbalances when onlining all memory blindly to ZONE_MOVABLE, in the worst case crashing the system. We have to know upfront how much memory we are going to hotplug such that we can safely enable auto-onlining of all hotplugged memory to ZONE_MOVABLE via "online_movable". This is far from practical and only applicable in limited setups -- like inside VMs under the RHV/oVirt hypervisor which will never hotplug more than 3 times the boot memory (and the limitation is only in place due to the Linux limitation). 2) We see more setups that implement dynamic VM resizing, hot(un)plugging memory to resize VM memory. In these setups, we might hotplug a lot of memory, but it might happen in various small steps in both directions (e.g., 2 GiB -> 8 GiB -> 4 GiB -> 16 GiB ...). virtio-mem is the primary driver of this upstream right now, performing such dynamic resizing NUMA-aware via multiple virtio-mem devices. Onlining all hotplugged memory to ZONE_NORMAL means we basically have no hotunplug guarantees. Onlining all to ZONE_MOVABLE means we can easily run into zone imbalances when growing a VM. We want a mixture, and we want as much memory as reasonable/configured in ZONE_MOVABLE. Details regarding zone imbalances can be found at [1]. 3) Memory devices consist of 1..X memory block devices, however, the kernel doesn't really track the relationship. Consequently, also user space has no idea. We want to make per-device decisions. As one example, for memory hotunplug it doesn't make sense to use a mixture of zones within a single DIMM: we want all MOVABLE if possible, otherwise all !MOVABLE, because any !MOVABLE part will easily block the whole DIMM from getting hotunplugged. As another example, virtio-mem operates on individual units that span 1..X memory blocks. Similar to a DIMM, we want a unit to either be all MOVABLE or !MOVABLE. A "unit" can be thought of like a DIMM, however, all units of a virtio-mem device logically belong together and are managed (added/removed) by a single driver. We want as much memory of a virtio-mem device to be MOVABLE as possible. 4) We want memory onlining to be done right from the kernel while adding memory, not triggered by user space via udev rules; for example, this is reqired for fast memory hotplug for drivers that add individual memory blocks, like virito-mem. We want a way to configure a policy in the kernel and avoid implementing advanced policies in user space. The auto-onlining support we have in the kernel is not sufficient. All we have is a) online everything MOVABLE (online_movable) b) online everything !MOVABLE (online_kernel) c) keep zones contiguous (online). This series allows configuring c) to mean instead "online movable if possible according to the coniguration, driven by a maximum MOVABLE:KERNEL ratio" -- a new onlining policy. II. Approach This series does 3 things: 1) Introduces the "auto-movable" online policy that initially operates on individual memory blocks only. It uses a maximum MOVABLE:KERNEL ratio to make a decision whether a memory block will be onlined to ZONE_MOVABLE or not. However, in the basic form, hotplugged KERNEL memory does not allow for more MOVABLE memory (details in the patches). CMA memory is treated like MOVABLE memory. 2) Introduces static (e.g., DIMM) and dynamic (e.g., virtio-mem) memory groups and uses group information to make decisions in the "auto-movable" online policy across memory blocks of a single memory device (modeled as memory group). More details can be found in patch #3 or in the DIMM example below. 3) Maximizes ZONE_MOVABLE memory within dynamic memory groups, by allowing ZONE_NORMAL memory within a dynamic memory group to allow for more ZONE_MOVABLE memory within the same memory group. The target use case is dynamic VM resizing using virtio-mem. See the virtio-mem example below. I remember that the basic idea of using a ratio to implement a policy in the kernel was once mentioned by Vitaly Kuznetsov, but I might be wrong (I lost the pointer to that discussion). For me, the main use case is using it along with virtio-mem (and DIMMs / ppc64 dlpar where necessary) for dynamic resizing of VMs, increasing the amount of memory we can hotunplug reliably again if we might eventually hotplug a lot of memory to a VM. III. Target Usage The target usage will be: 1) Linux boots with "mhp_default_online_type=offline" 2) User space (e.g., systemd unit) configures memory onlining (according to a config file and system properties), for example: * Setting memory_hotplug.online_policy=auto-movable * Setting memory_hotplug.auto_movable_ratio=301 * Setting memory_hotplug.auto_movable_numa_aware=true 3) User space enabled auto onlining via "echo online > /sys/devices/system/memory/auto_online_blocks" 4) User space triggers manual onlining of all already-offline memory blocks (go over offline memory blocks and set them to "online") IV. Example For DIMMs, hotplugging 4 GiB DIMMs to a 4 GiB VM with a configured ratio of 301% results in the following layout: Memory block 0-15: DMA32 (early) Memory block 32-47: Normal (early) Memory block 48-79: Movable (DIMM 0) Memory block 80-111: Movable (DIMM 1) Memory block 112-143: Movable (DIMM 2) Memory block 144-275: Normal (DIMM 3) Memory block 176-207: Normal (DIMM 4) ... all Normal (-> hotplugged Normal memory does not allow for more Movable memory) For virtio-mem, using a simple, single virtio-mem device with a 4 GiB VM will result in the following layout: Memory block 0-15: DMA32 (early) Memory block 32-47: Normal (early) Memory block 48-143: Movable (virtio-mem, first 12 GiB) Memory block 144: Normal (virtio-mem, next 128 MiB) Memory block 145-147: Movable (virtio-mem, next 384 MiB) Memory block 148: Normal (virtio-mem, next 128 MiB) Memory block 149-151: Movable (virtio-mem, next 384 MiB) ... Normal/Movable mixture as above (-> hotplugged Normal memory allows for more Movable memory within the same device) Which gives us maximum flexibility when dynamically growing/shrinking a VM in smaller steps. V. Doc Update I'll update the memory-hotplug.rst documentation, once the overhaul [1] is usptream. Until then, details can be found in patch #2. VI. Future Work 1) Use memory groups for ppc64 dlpar 2) Being able to specify a portion of (early) kernel memory that will be excluded from the ratio. Like "128 MiB globally/per node" are excluded. This might be helpful when starting VMs with extremely small memory footprint (e.g., 128 MiB) and hotplugging memory later -- not wanting the first hotplugged units getting onlined to ZONE_MOVABLE. One alternative would be a trigger to not consider ZONE_DMA memory in the ratio. We'll have to see if this is really rrequired. 3) Indicate to user space that MOVABLE might be a bad idea -- especially relevant when memory ballooning without support for balloon compaction is active. This patch (of 9): For implementing a new memory onlining policy, which determines when to online memory blocks to ZONE_MOVABLE semi-automatically, we need the number of present early (boot) pages -- present pages excluding hotplugged pages. Let's track these pages per zone. Pass a page instead of the zone to adjust_present_page_count(), similar as adjust_managed_page_count() and derive the zone from the page. It's worth noting that a memory block to be offlined/onlined is either completely "early" or "not early". add_memory() and friends can only add complete memory blocks and we only online/offline complete (individual) memory blocks. Link: https://lkml.kernel.org/r/20210806124715.17090-1-david@redhat.com Link: https://lkml.kernel.org/r/20210806124715.17090-2-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Cc: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Marek Kedzierski <mkedzier@redhat.com> Cc: Hui Zhu <teawater@gmail.com> Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com> Cc: Wei Yang <richard.weiyang@linux.alibaba.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Michal Hocko <mhocko@kernel.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Mike Rapoport <rppt@kernel.org> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Len Brown <lenb@kernel.org> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
![]() |
859a85ddf9 |
mm: remove pfn_valid_within() and CONFIG_HOLES_IN_ZONE
Patch series "mm: remove pfn_valid_within() and CONFIG_HOLES_IN_ZONE". After recent updates to freeing unused parts of the memory map, no architecture can have holes in the memory map within a pageblock. This makes pfn_valid_within() check and CONFIG_HOLES_IN_ZONE configuration option redundant. The first patch removes them both in a mechanical way and the second patch simplifies memory_hotplug::test_pages_in_a_zone() that had pfn_valid_within() surrounded by more logic than simple if. This patch (of 2): After recent changes in freeing of the unused parts of the memory map and rework of pfn_valid() in arm and arm64 there are no architectures that can have holes in the memory map within a pageblock and so nothing can enable CONFIG_HOLES_IN_ZONE which guards non trivial implementation of pfn_valid_within(). With that, pfn_valid_within() is always hardwired to 1 and can be completely removed. Remove calls to pfn_valid_within() and CONFIG_HOLES_IN_ZONE. Link: https://lkml.kernel.org/r/20210713080035.7464-1-rppt@kernel.org Link: https://lkml.kernel.org/r/20210713080035.7464-2-rppt@kernel.org Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
![]() |
65d759c8f9 |
mm: compaction: support triggering of proactive compaction by user
The proactive compaction[1] gets triggered for every 500msec and run compaction on the node for COMPACTION_HPAGE_ORDER (usually order-9) pages based on the value set to sysctl.compaction_proactiveness. Triggering the compaction for every 500msec in search of COMPACTION_HPAGE_ORDER pages is not needed for all applications, especially on the embedded system usecases which may have few MB's of RAM. Enabling the proactive compaction in its state will endup in running almost always on such systems. Other side, proactive compaction can still be very much useful for getting a set of higher order pages in some controllable manner(controlled by using the sysctl.compaction_proactiveness). So, on systems where enabling the proactive compaction always may proove not required, can trigger the same from user space on write to its sysctl interface. As an example, say app launcher decide to launch the memory heavy application which can be launched fast if it gets more higher order pages thus launcher can prepare the system in advance by triggering the proactive compaction from userspace. This triggering of proactive compaction is done on a write to sysctl.compaction_proactiveness by user. [1]https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit?id=facdaa917c4d5a376d09d25865f5a863f906234a [akpm@linux-foundation.org: tweak vm.rst, per Mike] Link: https://lkml.kernel.org/r/1627653207-12317-1-git-send-email-charante@codeaurora.org Signed-off-by: Charan Teja Reddy <charante@codeaurora.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Rafael Aquini <aquini@redhat.com> Cc: Mike Rapoport <rppt@kernel.org> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: Iurii Zaikin <yzaikin@google.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Nitin Gupta <nigupta@nvidia.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Khalid Aziz <khalid.aziz@oracle.com> Cc: David Rientjes <rientjes@google.com> Cc: Vinayak Menon <vinmenon@codeaurora.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
![]() |
01c8d337d1 |
mm/sparse: set SECTION_NID_SHIFT to 6
Currently SECTION_NID_SHIFT is set to 3, which is incorrect because bit 3
and 4 can be overlapped by sub-field for early NID, and can be
unexpectedly set on NUMA systems. There are a few non-critical issues
related to this:
- Having SECTION_TAINT_ZONE_DEVICE set for wrong sections forces
pfn_to_online_page() through the slow path, but doesn't actually break
the kernel.
- A kdump generation tool like makedumpfile uses this field to calculate
the physical address to read. So wrong bits can make the tool access to
wrong address and fail to create kdump. This can be avoided by the
tool, so it's not critical.
To fix it, set SECTION_NID_SHIFT to 6 which is the minimum number of
available bits of section flag field.
Link: https://lkml.kernel.org/r/20210707045548.810271-1-naoya.horiguchi@linux.dev
Fixes:
|
||
![]() |
11e02d3729 |
mm: sparse: remove __section_nr() function
As the last users of __section_nr() are gone, let's remove unused function __section_nr(). Link: https://lkml.kernel.org/r/20210707150212.855-4-ohoono.kwon@samsung.com Signed-off-by: Ohhoon Kwon <ohoono.kwon@samsung.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Mike Rapoport <rppt@linux.ibm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Cc: Baoquan He <bhe@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
![]() |
351de44fde |
mm/swap: make NODE_DATA an inline function on CONFIG_FLATMEM
make W=1 generates the following warning in mm/workingset.c for allnoconfig mm/workingset.c: In function `unpack_shadow': mm/workingset.c:201:15: warning: variable `nid' set but not used [-Wunused-but-set-variable] int memcgid, nid; ^~~ On FLATMEM, NODE_DATA returns a global pglist_data without dereferencing nid. Make the helper an inline function to suppress the warning, add type checking and to apply any side-effects in the parameter list. Link: https://lkml.kernel.org/r/20210520084809.8576-15-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Reviewed-by: Yang Shi <shy828301@gmail.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Dan Streetman <ddstreet@ieee.org> Cc: David Hildenbrand <david@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
![]() |
041711ce7c |
mm: fix spelling mistakes
Fix some spelling mistakes in comments: each having differents usage ==> each has a different usage statments ==> statements adresses ==> addresses aggresive ==> aggressive datas ==> data posion ==> poison higer ==> higher precisly ==> precisely wont ==> won't We moves tha ==> We move the endianess ==> endianness Link: https://lkml.kernel.org/r/20210519065853.7723-2-thunder.leizhen@huawei.com Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Reviewed-by: Souptick Joarder <jrdr.linux@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
![]() |
16c9afc776 |
arm64/mm: drop HAVE_ARCH_PFN_VALID
CONFIG_SPARSEMEM_VMEMMAP is now the only available memory model on arm64 platforms and free_unused_memmap() would just return without creating any holes in the memmap mapping. There is no need for any special handling in pfn_valid() and HAVE_ARCH_PFN_VALID can just be dropped. This also moves the pfn upper bits sanity check into generic pfn_valid(). Link: https://lkml.kernel.org/r/1621947349-25421-1-git-send-email-anshuman.khandual@arm.com Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com> Acked-by: David Hildenbrand <david@redhat.com> Acked-by: Mike Rapoport <rppt@linux.ibm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Cc: David Hildenbrand <david@redhat.com> Cc: Mike Rapoport <rppt@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
![]() |
51c656aef6 |
include/linux/mmzone.h: add documentation for pfn_valid()
Patch series "arm64: drop pfn_valid_within() and simplify pfn_valid()", v4. These patches aim to remove CONFIG_HOLES_IN_ZONE and essentially hardwire pfn_valid_within() to 1. The idea is to mark NOMAP pages as reserved in the memory map and restore the intended semantics of pfn_valid() to designate availability of struct page for a pfn. With this the core mm will be able to cope with the fact that it cannot use NOMAP pages and the holes created by NOMAP ranges within MAX_ORDER blocks will be treated correctly even without the need for pfn_valid_within. This patch (of 4): Add comment describing the semantics of pfn_valid() that clarifies that pfn_valid() only checks for availability of a memory map entry (i.e. struct page) for a PFN rather than availability of usable memory backing that PFN. The most "generic" version of pfn_valid() used by the configurations with SPARSEMEM enabled resides in include/linux/mmzone.h so this is the most suitable place for documentation about semantics of pfn_valid(). Link: https://lkml.kernel.org/r/20210511100550.28178-1-rppt@kernel.org Link: https://lkml.kernel.org/r/20210511100550.28178-2-rppt@kernel.org Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Suggested-by: Anshuman Khandual <anshuman.khandual@arm.com> Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com> Acked-by: Ard Biesheuvel <ardb@kernel.org> Reviewed-by: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: David Hildenbrand <david@redhat.com> Cc: Marc Zyngier <maz@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
![]() |
44042b4498 |
mm/page_alloc: allow high-order pages to be stored on the per-cpu lists
The per-cpu page allocator (PCP) only stores order-0 pages. This means that all THP and "cheap" high-order allocations including SLUB contends on the zone->lock. This patch extends the PCP allocator to store THP and "cheap" high-order pages. Note that struct per_cpu_pages increases in size to 256 bytes (4 cache lines) on x86-64. Note that this is not necessarily a universal performance win because of how it is implemented. High-order pages can cause pcp->high to be exceeded prematurely for lower-orders so for example, a large number of THP pages being freed could release order-0 pages from the PCP lists. Hence, much depends on the allocation/free pattern as observed by a single CPU to determine if caching helps or hurts a particular workload. That said, basic performance testing passed. The following is a netperf UDP_STREAM test which hits the relevant patches as some of the network allocations are high-order. netperf-udp 5.13.0-rc2 5.13.0-rc2 mm-pcpburst-v3r4 mm-pcphighorder-v1r7 Hmean send-64 261.46 ( 0.00%) 266.30 * 1.85%* Hmean send-128 516.35 ( 0.00%) 536.78 * 3.96%* Hmean send-256 1014.13 ( 0.00%) 1034.63 * 2.02%* Hmean send-1024 3907.65 ( 0.00%) 4046.11 * 3.54%* Hmean send-2048 7492.93 ( 0.00%) 7754.85 * 3.50%* Hmean send-3312 11410.04 ( 0.00%) 11772.32 * 3.18%* Hmean send-4096 13521.95 ( 0.00%) 13912.34 * 2.89%* Hmean send-8192 21660.50 ( 0.00%) 22730.72 * 4.94%* Hmean send-16384 31902.32 ( 0.00%) 32637.50 * 2.30%* Functionally, a patch like this is necessary to make bulk allocation of high-order pages work with similar performance to order-0 bulk allocations. The bulk allocator is not updated in this series as it would have to be determined by bulk allocation users how they want to track the order of pages allocated with the bulk allocator. Link: https://lkml.kernel.org/r/20210611135753.GC30378@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Zi Yan <ziy@nvidia.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
![]() |
43b02ba93b |
mm: replace CONFIG_FLAT_NODE_MEM_MAP with CONFIG_FLATMEM
After removal of the DISCONTIGMEM memory model the FLAT_NODE_MEM_MAP configuration option is equivalent to FLATMEM. Drop CONFIG_FLAT_NODE_MEM_MAP and use CONFIG_FLATMEM instead. Link: https://lkml.kernel.org/r/20210608091316.3622-10-rppt@kernel.org Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: David Hildenbrand <david@redhat.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Matt Turner <mattst88@gmail.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
![]() |
a9ee6cf5c6 |
mm: replace CONFIG_NEED_MULTIPLE_NODES with CONFIG_NUMA
After removal of DISCINTIGMEM the NEED_MULTIPLE_NODES and NUMA configuration options are equivalent. Drop CONFIG_NEED_MULTIPLE_NODES and use CONFIG_NUMA instead. Done with $ sed -i 's/CONFIG_NEED_MULTIPLE_NODES/CONFIG_NUMA/' \ $(git grep -wl CONFIG_NEED_MULTIPLE_NODES) $ sed -i 's/NEED_MULTIPLE_NODES/NUMA/' \ $(git grep -wl NEED_MULTIPLE_NODES) with manual tweaks afterwards. [rppt@linux.ibm.com: fix arm boot crash] Link: https://lkml.kernel.org/r/YMj9vHhHOiCVN4BF@linux.ibm.com Link: https://lkml.kernel.org/r/20210608091316.3622-9-rppt@kernel.org Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: David Hildenbrand <david@redhat.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Matt Turner <mattst88@gmail.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
![]() |
bb1c50d396 |
mm: remove CONFIG_DISCONTIGMEM
There are no architectures that support DISCONTIGMEM left. Remove the configuration option and the dead code it was guarding in the generic memory management code. Link: https://lkml.kernel.org/r/20210608091316.3622-6-rppt@kernel.org Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: David Hildenbrand <david@redhat.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Matt Turner <mattst88@gmail.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
![]() |
777c00f5ed |
mm: drop SECTION_SHIFT in code comments
Actually SECTIONS_SHIFT is used in the kernel code, so the code comments
is strictly incorrect. And since commit
|
||
![]() |
74f4482209 |
mm/page_alloc: introduce vm.percpu_pagelist_high_fraction
This introduces a new sysctl vm.percpu_pagelist_high_fraction. It is similar to the old vm.percpu_pagelist_fraction. The old sysctl increased both pcp->batch and pcp->high with the higher pcp->high potentially reducing zone->lock contention. However, the higher pcp->batch value also potentially increased allocation latency while the PCP was refilled. This sysctl only adjusts pcp->high so that zone->lock contention is potentially reduced but allocation latency during a PCP refill remains the same. # grep -E "high:|batch" /proc/zoneinfo | tail -2 high: 649 batch: 63 # sysctl vm.percpu_pagelist_high_fraction=8 # grep -E "high:|batch" /proc/zoneinfo | tail -2 high: 35071 batch: 63 # sysctl vm.percpu_pagelist_high_fraction=64 high: 4383 batch: 63 # sysctl vm.percpu_pagelist_high_fraction=0 high: 649 batch: 63 [mgorman@techsingularity.net: fix documentation] Link: https://lkml.kernel.org/r/20210528151010.GQ30378@techsingularity.net Link: https://lkml.kernel.org/r/20210525080119.5455-7-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Dave Hansen <dave.hansen@linux.intel.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Hillf Danton <hdanton@sina.com> Cc: Michal Hocko <mhocko@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
![]() |
c49c2c47da |
mm/page_alloc: limit the number of pages on PCP lists when reclaim is active
When kswapd is active then direct reclaim is potentially active. In either case, it is possible that a zone would be balanced if pages were not trapped on PCP lists. Instead of draining remote pages, simply limit the size of the PCP lists while kswapd is active. Link: https://lkml.kernel.org/r/20210525080119.5455-6-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Hillf Danton <hdanton@sina.com> Cc: Michal Hocko <mhocko@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
![]() |
3b12e7e979 |
mm/page_alloc: scale the number of pages that are batch freed
When a task is freeing a large number of order-0 pages, it may acquire the zone->lock multiple times freeing pages in batches. This may unnecessarily contend on the zone lock when freeing very large number of pages. This patch adapts the size of the batch based on the recent pattern to scale the batch size for subsequent frees. As the machines I used were not large enough to test this are not large enough to illustrate a problem, a debugging patch shows patterns like the following (slightly editted for clarity) Baseline vanilla kernel time-unmap-14426 [...] free_pcppages_bulk: free 63 count 378 high 378 time-unmap-14426 [...] free_pcppages_bulk: free 63 count 378 high 378 time-unmap-14426 [...] free_pcppages_bulk: free 63 count 378 high 378 time-unmap-14426 [...] free_pcppages_bulk: free 63 count 378 high 378 time-unmap-14426 [...] free_pcppages_bulk: free 63 count 378 high 378 With patches time-unmap-7724 [...] free_pcppages_bulk: free 126 count 814 high 814 time-unmap-7724 [...] free_pcppages_bulk: free 252 count 814 high 814 time-unmap-7724 [...] free_pcppages_bulk: free 504 count 814 high 814 time-unmap-7724 [...] free_pcppages_bulk: free 751 count 814 high 814 time-unmap-7724 [...] free_pcppages_bulk: free 751 count 814 high 814 Link: https://lkml.kernel.org/r/20210525080119.5455-5-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Dave Hansen <dave.hansen@linux.intel.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Hillf Danton <hdanton@sina.com> Cc: Michal Hocko <mhocko@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
![]() |
bbbecb35a4 |
mm/page_alloc: delete vm.percpu_pagelist_fraction
Patch series "Calculate pcp->high based on zone sizes and active CPUs", v2. The per-cpu page allocator (PCP) is meant to reduce contention on the zone lock but the sizing of batch and high is archaic and neither takes the zone size into account or the number of CPUs local to a zone. With larger zones and more CPUs per node, the contention is getting worse. Furthermore, the fact that vm.percpu_pagelist_fraction adjusts both batch and high values means that the sysctl can reduce zone lock contention but also increase allocation latencies. This series disassociates pcp->high from pcp->batch and then scales pcp->high based on the size of the local zone with limited impact to reclaim and accounting for active CPUs but leaves pcp->batch static. It also adapts the number of pages that can be on the pcp list based on recent freeing patterns. The motivation is partially to adjust to larger memory sizes but is also driven by the fact that large batches of page freeing via release_pages() often shows zone contention as a major part of the problem. Another is a bug report based on an older kernel where a multi-terabyte process can takes several minutes to exit. A workaround was to use vm.percpu_pagelist_fraction to increase the pcp->high value but testing indicated that a production workload could not use the same values because of an increase in allocation latencies. Unfortunately, I cannot reproduce this test case myself as the multi-terabyte machines are in active use but it should alleviate the problem. The series aims to address both and partially acts as a pre-requisite. pcp only works with order-0 which is useless for SLUB (when using high orders) and THP (unconditionally). To store high-order pages on PCP, the pcp->high values need to be increased first. This patch (of 6): The vm.percpu_pagelist_fraction is used to increase the batch and high limits for the per-cpu page allocator (PCP). The intent behind the sysctl is to reduce zone lock acquisition when allocating/freeing pages but it has a problem. While it can decrease contention, it can also increase latency on the allocation side due to unreasonably large batch sizes. This leads to games where an administrator adjusts percpu_pagelist_fraction on the fly to work around contention and allocation latency problems. This series aims to alleviate the problems with zone lock contention while avoiding the allocation-side latency problems. For the purposes of review, it's easier to remove this sysctl now and reintroduce a similar sysctl later in the series that deals only with pcp->high. Link: https://lkml.kernel.org/r/20210525080119.5455-1-mgorman@techsingularity.net Link: https://lkml.kernel.org/r/20210525080119.5455-2-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Dave Hansen <dave.hansen@linux.intel.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Hillf Danton <hdanton@sina.com> Cc: Michal Hocko <mhocko@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
![]() |
f19298b951 |
mm/vmstat: convert NUMA statistics to basic NUMA counters
NUMA statistics are maintained on the zone level for hits, misses, foreign etc but nothing relies on them being perfectly accurate for functional correctness. The counters are used by userspace to get a general overview of a workloads NUMA behaviour but the page allocator incurs a high cost to maintain perfect accuracy similar to what is required for a vmstat like NR_FREE_PAGES. There even is a sysctl vm.numa_stat to allow userspace to turn off the collection of NUMA statistics like NUMA_HIT. This patch converts NUMA_HIT and friends to be NUMA events with similar accuracy to VM events. There is a possibility that slight errors will be introduced but the overall trend as seen by userspace will be similar. The counters are no longer updated from vmstat_refresh context as it is unnecessary overhead for counters that may never be read by userspace. Note that counters could be maintained at the node level to save space but it would have a user-visible impact due to /proc/zoneinfo. [lkp@intel.com: Fix misplaced closing brace for !CONFIG_NUMA] Link: https://lkml.kernel.org/r/20210512095458.30632-4-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jesper Dangaard Brouer <brouer@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
![]() |
dbbee9d5cd |
mm/page_alloc: convert per-cpu list protection to local_lock
There is a lack of clarity of what exactly local_irq_save/local_irq_restore protects in page_alloc.c . It conflates the protection of per-cpu page allocation structures with per-cpu vmstat deltas. This patch protects the PCP structure using local_lock which for most configurations is identical to IRQ enabling/disabling. The scope of the lock is still wider than it should be but this is decreased later. It is possible for the local_lock to be embedded safely within struct per_cpu_pages but it adds complexity to free_unref_page_list. [akpm@linux-foundation.org: coding style fixes] [mgorman@techsingularity.net: work around a pahole limitation with zero-sized struct pagesets] Link: https://lkml.kernel.org/r/20210526080741.GW30378@techsingularity.net [lkp@intel.com: Make pagesets static] Link: https://lkml.kernel.org/r/20210512095458.30632-3-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jesper Dangaard Brouer <brouer@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
![]() |
28f836b677 |
mm/page_alloc: split per cpu page lists and zone stats
The PCP (per-cpu page allocator in page_alloc.c) shares locking requirements with vmstat and the zone lock which is inconvenient and causes some issues. For example, the PCP list and vmstat share the same per-cpu space meaning that it's possible that vmstat updates dirty cache lines holding per-cpu lists across CPUs unless padding is used. Second, PREEMPT_RT does not want to disable IRQs for too long in the page allocator. This series splits the locking requirements and uses locks types more suitable for PREEMPT_RT, reduces the time when special locking is required for stats and reduces the time when IRQs need to be disabled on !PREEMPT_RT kernels. Why local_lock? PREEMPT_RT considers the following sequence to be unsafe as documented in Documentation/locking/locktypes.rst local_irq_disable(); spin_lock(&lock); The pcp allocator has this sequence for rmqueue_pcplist (local_irq_save) -> __rmqueue_pcplist -> rmqueue_bulk (spin_lock). While it's possible to separate this out, it generally means there are points where we enable IRQs and reenable them again immediately. To prevent a migration and the per-cpu pointer going stale, migrate_disable is also needed. That is a custom lock that is similar, but worse, than local_lock. Furthermore, on PREEMPT_RT, it's undesirable to leave IRQs disabled for too long. By converting to local_lock which disables migration on PREEMPT_RT, the locking requirements can be separated and start moving the protections for PCP, stats and the zone lock to PREEMPT_RT-safe equivalent locking. As a bonus, local_lock also means that PROVE_LOCKING does something useful. After that, it's obvious that zone_statistics incurs too much overhead and leaves IRQs disabled for longer than necessary on !PREEMPT_RT kernels. zone_statistics uses perfectly accurate counters requiring IRQs be disabled for parallel RMW sequences when inaccurate ones like vm_events would do. The series makes the NUMA statistics (NUMA_HIT and friends) inaccurate counters that then require no special protection on !PREEMPT_RT. The bulk page allocator can then do stat updates in bulk with IRQs enabled which should improve the efficiency. Technically, this could have been done without the local_lock and vmstat conversion work and the order simply reflects the timing of when different series were implemented. Finally, there are places where we conflate IRQs being disabled for the PCP with the IRQ-safe zone spinlock. The remainder of the series reduces the scope of what is protected by disabled IRQs on !PREEMPT_RT kernels. By the end of the series, page_alloc.c does not call local_irq_save so the locking scope is a bit clearer. The one exception is that modifying NR_FREE_PAGES still happens in places where it's known the IRQs are disabled as it's harmless for PREEMPT_RT and would be expensive to split the locking there. No performance data is included because despite the overhead of the stats, it's within the noise for most workloads on !PREEMPT_RT. However, Jesper Dangaard Brouer ran a page allocation microbenchmark on a E5-1650 v4 @ 3.60GHz CPU on the first version of this series. Focusing on the array variant of the bulk page allocator reveals the following. (CPU: Intel(R) Xeon(R) CPU E5-1650 v4 @ 3.60GHz) ARRAY variant: time_bulk_page_alloc_free_array: step=bulk size Baseline Patched 1 56.383 54.225 (+3.83%) 2 40.047 35.492 (+11.38%) 3 37.339 32.643 (+12.58%) 4 35.578 30.992 (+12.89%) 8 33.592 29.606 (+11.87%) 16 32.362 28.532 (+11.85%) 32 31.476 27.728 (+11.91%) 64 30.633 27.252 (+11.04%) 128 30.596 27.090 (+11.46%) While this is a positive outcome, the series is more likely to be interesting to the RT people in terms of getting parts of the PREEMPT_RT tree into mainline. This patch (of 9): The per-cpu page allocator lists and the per-cpu vmstat deltas are stored in the same struct per_cpu_pages even though vmstats have no direct impact on the per-cpu page lists. This is inconsistent because the vmstats for a node are stored on a dedicated structure. The bigger issue is that the per_cpu_pages structure is not cache-aligned and stat updates either cache conflict with adjacent per-cpu lists incurring a runtime cost or padding is required incurring a memory cost. This patch splits the per-cpu pagelists and the vmstat deltas into separate structures. It's mostly a mechanical conversion but some variable renaming is done to clearly distinguish the per-cpu pages structure (pcp) from the vmstats (pzstats). Superficially, this appears to increase the size of the per_cpu_pages structure but the movement of expire fills a structure hole so there is no impact overall. [mgorman@techsingularity.net: make it W=1 cleaner] Link: https://lkml.kernel.org/r/20210514144622.GA3735@techsingularity.net [mgorman@techsingularity.net: make it W=1 even cleaner] Link: https://lkml.kernel.org/r/20210516140705.GB3735@techsingularity.net [lkp@intel.com: check struct per_cpu_zonestat has a non-zero size] [vbabka@suse.cz: Init zone->per_cpu_zonestats properly] Link: https://lkml.kernel.org/r/20210512095458.30632-1-mgorman@techsingularity.net Link: https://lkml.kernel.org/r/20210512095458.30632-2-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: Jesper Dangaard Brouer <brouer@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Michal Hocko <mhocko@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
![]() |
b19bd1c976 |
mm/mmzone.h: simplify is_highmem_idx()
There is a lot of historical ifdefery in is_highmem_idx() and its helper zone_movable_is_highmem() that was required because of two different paths for nodes and zones initialization that were selected at compile time. Until commit |
||
![]() |
cb152a1a95 |
mm: fix some typos and code style problems
fix some typos and code style problems in mm. gfp.h: s/MAXNODES/MAX_NUMNODES mmzone.h: s/then/than rmap.c: s/__vma_split()/__vma_adjust() swap.c: s/__mod_zone_page_stat/__mod_zone_page_state, s/is is/is swap_state.c: s/whoes/whose z3fold.c: code style problem fix in z3fold_unregister_migration zsmalloc.c: s/of/or, s/give/given Link: https://lkml.kernel.org/r/20210419083057.64820-1-luoshijie1@huawei.com Signed-off-by: Shijie Luo <luoshijie1@huawei.com> Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
![]() |
a08a2ae346 |
mm,memory_hotplug: allocate memmap from the added memory range
Physical memory hotadd has to allocate a memmap (struct page array) for the newly added memory section. Currently, alloc_pages_node() is used for those allocations. This has some disadvantages: a) an existing memory is consumed for that purpose (eg: ~2MB per 128MB memory section on x86_64) This can even lead to extreme cases where system goes OOM because the physically hotplugged memory depletes the available memory before it is onlined. b) if the whole node is movable then we have off-node struct pages which has performance drawbacks. c) It might be there are no PMD_ALIGNED chunks so memmap array gets populated with base pages. This can be improved when CONFIG_SPARSEMEM_VMEMMAP is enabled. Vmemap page tables can map arbitrary memory. That means that we can reserve a part of the physically hotadded memory to back vmemmap page tables. This implementation uses the beginning of the hotplugged memory for that purpose. There are some non-obviously things to consider though. Vmemmap pages are allocated/freed during the memory hotplug events (add_memory_resource(), try_remove_memory()) when the memory is added/removed. This means that the reserved physical range is not online although it is used. The most obvious side effect is that pfn_to_online_page() returns NULL for those pfns. The current design expects that this should be OK as the hotplugged memory is considered a garbage until it is onlined. For example hibernation wouldn't save the content of those vmmemmaps into the image so it wouldn't be restored on resume but this should be OK as there no real content to recover anyway while metadata is reachable from other data structures (e.g. vmemmap page tables). The reserved space is therefore (de)initialized during the {on,off}line events (mhp_{de}init_memmap_on_memory). That is done by extracting page allocator independent initialization from the regular onlining path. The primary reason to handle the reserved space outside of {on,off}line_pages is to make each initialization specific to the purpose rather than special case them in a single function. As per above, the functions that are introduced are: - mhp_init_memmap_on_memory: Initializes vmemmap pages by calling move_pfn_range_to_zone(), calls kasan_add_zero_shadow(), and onlines as many sections as vmemmap pages fully span. - mhp_deinit_memmap_on_memory: Offlines as many sections as vmemmap pages fully span, removes the range from zhe zone by remove_pfn_range_from_zone(), and calls kasan_remove_zero_shadow() for the range. The new function memory_block_online() calls mhp_init_memmap_on_memory() before doing the actual online_pages(). Should online_pages() fail, we clean up by calling mhp_deinit_memmap_on_memory(). Adjusting of present_pages is done at the end once we know that online_pages() succedeed. On offline, memory_block_offline() needs to unaccount vmemmap pages from present_pages() before calling offline_pages(). This is necessary because offline_pages() tears down some structures based on the fact whether the node or the zone become empty. If offline_pages() fails, we account back vmemmap pages. If it succeeds, we call mhp_deinit_memmap_on_memory(). Hot-remove: We need to be careful when removing memory, as adding and removing memory needs to be done with the same granularity. To check that this assumption is not violated, we check the memory range we want to remove and if a) any memory block has vmemmap pages and b) the range spans more than a single memory block, we scream out loud and refuse to proceed. If all is good and the range was using memmap on memory (aka vmemmap pages), we construct an altmap structure so free_hugepage_table does the right thing and calls vmem_altmap_free instead of free_pagetable. Link: https://lkml.kernel.org/r/20210421102701.25051-5-osalvador@suse.de Signed-off-by: Oscar Salvador <osalvador@suse.de> Reviewed-by: David Hildenbrand <david@redhat.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
![]() |
d1e153fea2 |
mm/gup: migrate pinned pages out of movable zone
We should not pin pages in ZONE_MOVABLE. Currently, we do not pin only movable CMA pages. Generalize the function that migrates CMA pages to migrate all movable pages. Use is_pinnable_page() to check which pages need to be migrated Link: https://lkml.kernel.org/r/20210215161349.246722-10-pasha.tatashin@soleen.com Signed-off-by: Pavel Tatashin <pasha.tatashin@soleen.com> Reviewed-by: John Hubbard <jhubbard@nvidia.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: James Morris <jmorris@namei.org> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Michal Hocko <mhocko@kernel.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sasha Levin <sashal@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Tyler Hicks <tyhicks@linux.microsoft.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
![]() |
9afaf30f7a |
mm/gup: do not migrate zero page
On some platforms ZERO_PAGE(0) might end-up in a movable zone. Do not migrate zero page in gup during longterm pinning as migration of zero page is not allowed. For example, in x86 QEMU with 16G of memory and kernelcore=5G parameter, I see the following: Boot#1: zero_pfn 0x48a8d zero_pfn zone: ZONE_DMA32 Boot#2: zero_pfn 0x20168d zero_pfn zone: ZONE_MOVABLE On x86, empty_zero_page is declared in .bss and depending on the loader may end up in different physical locations during boots. Also, move is_zero_pfn() my_zero_pfn() functions under CONFIG_MMU, because zero_pfn that they are using is declared in memory.c which is compiled with CONFIG_MMU. Link: https://lkml.kernel.org/r/20210215161349.246722-9-pasha.tatashin@soleen.com Signed-off-by: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: James Morris <jmorris@namei.org> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Michal Hocko <mhocko@kernel.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sasha Levin <sashal@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Tyler Hicks <tyhicks@linux.microsoft.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
![]() |
198fba4137 |
mm/mmzone.h: fix existing kernel-doc comments and link them to core-api
There are a couple of kernel-doc comments in include/linux/mmzone.h but they have minor formatting issues that would cause kernel-doc warnings. Fix the formatting of those comments, add missing Return: descriptions and link include/linux/mmzone.h to Documentation/core-api/mm-api.rst Link: https://lkml.kernel.org/r/20210426141927.1314326-2-rppt@kernel.org Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
![]() |
1f90a3477d |
mm: teach pfn_to_online_page() about ZONE_DEVICE section collisions
While pfn_to_online_page() is able to determine pfn_valid() at subsection
granularity it is not able to reliably determine if a given pfn is also
online if the section is mixes ZONE_{NORMAL,MOVABLE} with ZONE_DEVICE.
This means that pfn_to_online_page() may return invalid @page objects.
For example with a memory map like:
100000000-1fbffffff : System RAM
142000000-143002e16 : Kernel code
143200000-143713fff : Kernel rodata
143800000-143b15b7f : Kernel data
144227000-144ffffff : Kernel bss
1fc000000-2fbffffff : Persistent Memory (legacy)
1fc000000-2fbffffff : namespace0.0
This command:
echo 0x1fc000000 > /sys/devices/system/memory/soft_offline_page
...succeeds when it should fail. When it succeeds it touches an
uninitialized page and may crash or cause other damage (see
dissolve_free_huge_page()).
While the memory map above is contrived via the memmap=ss!nn kernel
command line option, the collision happens in practice on shipping
platforms. The memory controller resources that decode spans of physical
address space are a limited resource. One technique platform-firmware
uses to conserve those resources is to share a decoder across 2 devices to
keep the address range contiguous. Unfortunately the unit of operation of
a decoder is 64MiB while the Linux section size is 128MiB. This results
in situations where, without subsection hotplug memory mappings with
different lifetimes collide into one object that can only express one
lifetime.
Update move_pfn_range_to_zone() to flag (SECTION_TAINT_ZONE_DEVICE) a
section that mixes ZONE_DEVICE pfns with other online pfns. With
SECTION_TAINT_ZONE_DEVICE to delineate, pfn_to_online_page() can fall back
to a slow-path check for ZONE_DEVICE pfns in an online section. In the
fast path online_section() for a full ZONE_DEVICE section returns false.
Because the collision case is rare, and for simplicity, the
SECTION_TAINT_ZONE_DEVICE flag is never cleared once set.
[dan.j.williams@intel.com: fix CONFIG_ZONE_DEVICE=n build]
Link: https://lkml.kernel.org/r/CAPcyv4iX+7LAgAeSqx7Zw-Zd=ZV9gBv8Bo7oTbwCOOqJoZ3+Yg@mail.gmail.com
Link: https://lkml.kernel.org/r/161058500675.1840162.7887862152161279354.stgit@dwillia2-desk3.amr.corp.intel.com
Fixes:
|
||
![]() |
3c381db1fa |
mm/page_alloc: count CMA pages per zone and print them in /proc/zoneinfo
Let's count the number of CMA pages per zone and print them in /proc/zoneinfo. Having access to the total number of CMA pages per zone is helpful for debugging purposes to know where exactly the CMA pages ended up, and to figure out how many pages of a zone might behave differently, even after some of these pages might already have been allocated. As one example, CMA pages part of a kernel zone cannot be used for ordinary kernel allocations but instead behave more like ZONE_MOVABLE. For now, we are only able to get the global nr+free cma pages from /proc/meminfo and the free cma pages per zone from /proc/zoneinfo. Example after this patch when booting a 6 GiB QEMU VM with "hugetlb_cma=2G": # cat /proc/zoneinfo | grep cma cma 0 nr_free_cma 0 cma 0 nr_free_cma 0 cma 524288 nr_free_cma 493016 cma 0 cma 0 # cat /proc/meminfo | grep Cma CmaTotal: 2097152 kB CmaFree: 1972064 kB Note: We print even without CONFIG_CMA, just like "nr_free_cma"; this way, one can be sure when spotting "cma 0", that there are definetly no CMA pages located in a zone. [david@redhat.com: v2] Link: https://lkml.kernel.org/r/20210128164533.18566-1-david@redhat.com [david@redhat.com: v3] Link: https://lkml.kernel.org/r/20210129113451.22085-1-david@redhat.com Link: https://lkml.kernel.org/r/20210127101813.6370-3-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Acked-by: David Rientjes <rientjes@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org> Cc: Mike Rapoport <rppt@kernel.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Wei Yang <richard.weiyang@linux.alibaba.com> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
![]() |
2091339d59 |
mm/vmscan.c: make lruvec_lru_size() static
All other references to the function were removed after
commit
|
||
![]() |
b603894248 |
mm: memcg: add swapcache stat for memcg v2
This patch adds swapcache stat for the cgroup v2. The swapcache represents the memory that is accounted against both the memory and the swap limit of the cgroup. The main motivation behind exposing the swapcache stat is for enabling users to gracefully migrate from cgroup v1's memsw counter to cgroup v2's memory and swap counters. Cgroup v1's memsw limit allows users to limit the memory+swap usage of a workload but without control on the exact proportion of memory and swap. Cgroup v2 provides separate limits for memory and swap which enables more control on the exact usage of memory and swap individually for the workload. With some little subtleties, the v1's memsw limit can be switched with the sum of the v2's memory and swap limits. However the alternative for memsw usage is not yet available in cgroup v2. Exposing per-cgroup swapcache stat enables that alternative. Adding the memory usage and swap usage and subtracting the swapcache will approximate the memsw usage. This will help in the transparent migration of the workloads depending on memsw usage and limit to v2' memory and swap counters. The reasons these applications are still interested in this approximate memsw usage are: (1) these applications are not really interested in two separate memory and swap usage metrics. A single usage metric is more simple to use and reason about for them. (2) The memsw usage metric hides the underlying system's swap setup from the applications. Applications with multiple instances running in a datacenter with heterogeneous systems (some have swap and some don't) will keep seeing a consistent view of their usage. [akpm@linux-foundation.org: fix CONFIG_SWAP=n build] Link: https://lkml.kernel.org/r/20210108155813.2914586-3-shakeelb@google.com Signed-off-by: Shakeel Butt <shakeelb@google.com> Acked-by: Michal Hocko <mhocko@suse.com> Reviewed-by: Roman Gushchin <guro@fb.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Muchun Song <songmuchun@bytedance.com> Cc: Yang Shi <shy828301@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
![]() |
380780e718 |
mm: memcontrol: convert NR_FILE_PMDMAPPED account to pages
Currently we use struct per_cpu_nodestat to cache the vmstat counters,
which leads to inaccurate statistics especially THP vmstat counters. In
the systems with hundreds of processors it can be GBs of memory. For
example, for a 96 CPUs system, the threshold is the maximum number of 125.
And the per cpu counters can cache 23.4375 GB in total.
The THP page is already a form of batched addition (it will add 512 worth
of memory in one go) so skipping the batching seems like sensible.
Although every THP stats update overflows the per-cpu counter, resorting
to atomic global updates. But it can make the statistics more accuracy
for the THP vmstat counters.
So we convert the NR_FILE_PMDMAPPED account to pages. This patch is
consistent with
|
||
![]() |
a1528e21f8 |
mm: memcontrol: convert NR_SHMEM_PMDMAPPED account to pages
Currently we use struct per_cpu_nodestat to cache the vmstat counters,
which leads to inaccurate statistics especially THP vmstat counters. In
the systems with hundreds of processors it can be GBs of memory. For
example, for a 96 CPUs system, the threshold is the maximum number of 125.
And the per cpu counters can cache 23.4375 GB in total.
The THP page is already a form of batched addition (it will add 512 worth
of memory in one go) so skipping the batching seems like sensible.
Although every THP stats update overflows the per-cpu counter, resorting
to atomic global updates. But it can make the statistics more accuracy
for the THP vmstat counters.
So we convert the NR_SHMEM_PMDMAPPED account to pages. This patch is
consistent with
|
||
![]() |
57b2847d3c |
mm: memcontrol: convert NR_SHMEM_THPS account to pages
Currently we use struct per_cpu_nodestat to cache the vmstat counters,
which leads to inaccurate statistics especially THP vmstat counters. In
the systems with hundreds of processors it can be GBs of memory. For
example, for a 96 CPUs system, the threshold is the maximum number of 125.
And the per cpu counters can cache 23.4375 GB in total.
The THP page is already a form of batched addition (it will add 512 worth
of memory in one go) so skipping the batching seems like sensible.
Although every THP stats update overflows the per-cpu counter, resorting
to atomic global updates. But it can make the statistics more accuracy
for the THP vmstat counters.
So we convert the NR_SHMEM_THPS account to pages. This patch is
consistent with
|
||
![]() |
bf9ecead53 |
mm: memcontrol: convert NR_FILE_THPS account to pages
Currently we use struct per_cpu_nodestat to cache the vmstat counters,
which leads to inaccurate statistics especially THP vmstat counters. In
the systems with if hundreds of processors it can be GBs of memory. For
example, for a 96 CPUs system, the threshold is the maximum number of 125.
And the per cpu counters can cache 23.4375 GB in total.
The THP page is already a form of batched addition (it will add 512 worth
of memory in one go) so skipping the batching seems like sensible.
Although every THP stats update overflows the per-cpu counter, resorting
to atomic global updates. But it can make the statistics more accuracy
for the THP vmstat counters.
So we convert the NR_FILE_THPS account to pages. This patch is consistent
with
|
||
![]() |
69473e5de8 |
mm: memcontrol: convert NR_ANON_THPS account to pages
Currently we use struct per_cpu_nodestat to cache the vmstat counters,
which leads to inaccurate statistics especially THP vmstat counters. In
the systems with hundreds of processors it can be GBs of memory. For
example, for a 96 CPUs system, the threshold is the maximum number of 125.
And the per cpu counters can cache 23.4375 GB in total.
The THP page is already a form of batched addition (it will add 512 worth
of memory in one go) so skipping the batching seems like sensible.
Although every THP stats update overflows the per-cpu counter, resorting
to atomic global updates. But it can make the statistics more accuracy
for the THP vmstat counters.
So we convert the NR_ANON_THPS account to pages. This patch is consistent
with
|
||
![]() |
15b4473617 |
mm/lru: revise the comments of lru_lock
Since we changed the pgdat->lru_lock to lruvec->lru_lock, it's time to fix the incorrect comments in code. Also fixed some zone->lru_lock comment error from ancient time. etc. I struggled to understand the comment above move_pages_to_lru() (surely it never calls page_referenced()), and eventually realized that most of it had got separated from shrink_active_list(): move that comment back. Link: https://lkml.kernel.org/r/1604566549-62481-20-git-send-email-alex.shi@linux.alibaba.com Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Tejun Heo <tj@kernel.org> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Jann Horn <jannh@google.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Matthew Wilcox <willy@infradead.org> Cc: Alexander Duyck <alexander.duyck@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: "Chen, Rong A" <rong.a.chen@intel.com> Cc: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Michal Hocko <mhocko@kernel.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Mika Penttilä <mika.penttila@nextfour.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Yang Shi <yang.shi@linux.alibaba.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
![]() |
6168d0da2b |
mm/lru: replace pgdat lru_lock with lruvec lock
This patch moves per node lru_lock into lruvec, thus bring a lru_lock for each of memcg per node. So on a large machine, each of memcg don't have to suffer from per node pgdat->lru_lock competition. They could go fast with their self lru_lock. After move memcg charge before lru inserting, page isolation could serialize page's memcg, then per memcg lruvec lock is stable and could replace per node lru lock. In isolate_migratepages_block(), compact_unlock_should_abort and lock_page_lruvec_irqsave are open coded to work with compact_control. Also add a debug func in locking which may give some clues if there are sth out of hands. Daniel Jordan's testing show 62% improvement on modified readtwice case on his 2P * 10 core * 2 HT broadwell box. https://lore.kernel.org/lkml/20200915165807.kpp7uhiw7l3loofu@ca-dmjordan1.us.oracle.com/ Hugh Dickins helped on the patch polish, thanks! [alex.shi@linux.alibaba.com: fix comment typo] Link: https://lkml.kernel.org/r/5b085715-292a-4b43-50b3-d73dc90d1de5@linux.alibaba.com [alex.shi@linux.alibaba.com: use page_memcg()] Link: https://lkml.kernel.org/r/5a4c2b72-7ee8-2478-fc0e-85eb83aafec4@linux.alibaba.com Link: https://lkml.kernel.org/r/1604566549-62481-18-git-send-email-alex.shi@linux.alibaba.com Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com> Acked-by: Hugh Dickins <hughd@google.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Rong Chen <rong.a.chen@intel.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Yang Shi <yang.shi@linux.alibaba.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: Alexander Duyck <alexander.duyck@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Jann Horn <jannh@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@suse.com> Cc: Mika Penttilä <mika.penttila@nextfour.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Wei Yang <richard.weiyang@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
![]() |
ac73e3dc8a |
Merge branch 'akpm' (patches from Andrew)
Merge misc updates from Andrew Morton: - a few random little subsystems - almost all of the MM patches which are staged ahead of linux-next material. I'll trickle to post-linux-next work in as the dependents get merged up. Subsystems affected by this patch series: kthread, kbuild, ide, ntfs, ocfs2, arch, and mm (slab-generic, slab, slub, dax, debug, pagecache, gup, swap, shmem, memcg, pagemap, mremap, hmm, vmalloc, documentation, kasan, pagealloc, memory-failure, hugetlb, vmscan, z3fold, compaction, oom-kill, migration, cma, page-poison, userfaultfd, zswap, zsmalloc, uaccess, zram, and cleanups). * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (200 commits) mm: cleanup kstrto*() usage mm: fix fall-through warnings for Clang mm: slub: convert sysfs sprintf family to sysfs_emit/sysfs_emit_at mm: shmem: convert shmem_enabled_show to use sysfs_emit_at mm:backing-dev: use sysfs_emit in macro defining functions mm: huge_memory: convert remaining use of sprintf to sysfs_emit and neatening mm: use sysfs_emit for struct kobject * uses mm: fix kernel-doc markups zram: break the strict dependency from lzo zram: add stat to gather incompressible pages since zram set up zram: support page writeback mm/process_vm_access: remove redundant initialization of iov_r mm/zsmalloc.c: rework the list_add code in insert_zspage() mm/zswap: move to use crypto_acomp API for hardware acceleration mm/zswap: fix passing zero to 'PTR_ERR' warning mm/zswap: make struct kernel_param_ops definitions const userfaultfd/selftests: hint the test runner on required privilege userfaultfd/selftests: fix retval check for userfaultfd_open() userfaultfd/selftests: always dump something in modes userfaultfd: selftests: make __{s,u}64 format specifiers portable ... |
||
![]() |
952eaf8159 |
mm, page_alloc: cache pageset high and batch in struct zone
All per-cpu pagesets for a zone use the same high and batch values, that are duplicated there just for performance (locality) reasons. This patch adds the same variables also to struct zone as a shared copy. This will be useful later for making possible to disable pcplists temporarily by setting high value to 0, while remembering the values for restoring them later. But we can also immediately benefit from not updating pagesets of all possible cpus in case the newly recalculated values (after sysctl change or memory online/offline) are actually unchanged from the previous ones. Link: https://lkml.kernel.org/r/20201111092812.11329-6-vbabka@suse.cz Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Oscar Salvador <osalvador@suse.de> Acked-by: Michal Hocko <mhocko@suse.com> Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
![]() |
5e545df329 |
arm: remove CONFIG_ARCH_HAS_HOLES_MEMORYMODEL
ARM is the only architecture that defines CONFIG_ARCH_HAS_HOLES_MEMORYMODEL which in turn enables memmap_valid_within() function that is intended to verify existence of struct page associated with a pfn when there are holes in the memory map. However, the ARCH_HAS_HOLES_MEMORYMODEL also enables HAVE_ARCH_PFN_VALID and arch-specific pfn_valid() implementation that also deals with the holes in the memory map. The only two users of memmap_valid_within() call this function after a call to pfn_valid() so the memmap_valid_within() check becomes redundant. Remove CONFIG_ARCH_HAS_HOLES_MEMORYMODEL and memmap_valid_within() and rely entirely on ARM's implementation of pfn_valid() that is now enabled unconditionally. Link: https://lkml.kernel.org/r/20201101170454.9567-9-rppt@kernel.org Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Matt Turner <mattst88@gmail.com> Cc: Meelis Roos <mroos@linux.ee> Cc: Michael Schmitz <schmitzmic@gmail.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
![]() |
03e92a5e09 |
ia64: remove custom __early_pfn_to_nid()
The ia64 implementation of __early_pfn_to_nid() essentially relies on the same data as the generic implementation. The correspondence between memory ranges and nodes is set in memblock during early memory initialization in register_active_ranges() function. The initialization of sparsemem that requires early_pfn_to_nid() happens later and it can use the memblock information like the other architectures. Link: https://lkml.kernel.org/r/20201101170454.9567-3-rppt@kernel.org Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Matt Turner <mattst88@gmail.com> Cc: Meelis Roos <mroos@linux.ee> Cc: Michael Schmitz <schmitzmic@gmail.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |