The dmi_system_id.ident values are not used, replace the
.ident = "$ident" lines with /* $ident */ to drop the unused strings
from the text section.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Before this patch there were 6 dmi_system_id tables. While looking at
the override_table[] there are only 2 cases:
1. irq 1, level, active-low, not-shared, skip-override
2. irq 1, edge, activ-low, shared, force-override
Merge the dmi_system_id tables for identical cases together,
going from 6 dmi_system_id tables and 6 override_table[] entries
to just 2, one for each case.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Like various other ASUS ExpertBook-s, the ASUS ExpertBook B1402CBA
has an ACPI DSDT table that describes IRQ 1 as ActiveLow while
the kernel overrides it to EdgeHigh.
This prevents the keyboard from working. To fix this issue, add this laptop
to the skip_override_table so that the kernel does not override IRQ 1.
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217901
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Like the Xiaomi Mi Pad 2 these 3 Lenovo x86 Android tablet models also
use a TI LP8557 backlight controller in direct I2C brightness register
control mode.
Add "vendor" quirks for these 3 models to disable the non-working
native / acpi_video backlight devices.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The Xiaomi Mi Pad 2 is currently listed under the:
"Models which should use the vendor backlight interface,
because of broken ACPI video backlight control." section.
But this is not 100% correct. The Xiaomi Mi Pad 2 is one of a set of
x86 tablets which shipped with Android as factory OS. These tablets
have a TI LP8557 backlight controller with its PWM input _not_
connected to the PMIC or chipset (LPSS) PWM output.
Instead the backlight can be controlled by configuring the LP8557
for direct control through its brightness I2C register and then
using the lp855x driver.
This setup means that neither i915's native or acpi_video backlight
control works, so a "vendor" quirk is added for these tablets to
disable both the native and acpi_video backlight devices, but these
devices do not use vendor control in the typical meaning of
vendor specific SMBIOS or ACPI calls being used.
This patch is a preparation patch for adding "vendor" quirks
for a couple more such tablet models.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
A bug was introduced during unification of setting CAP_SMP_T_SWCOORD for
the _PDC and _OSC methods.
The third u32 in the buffer is never cleared before setting bits on it.
The memory is not guaranteed to be zero as it was allocated by kmalloc()
instead of kzalloc().
Fix this by initializing the third u32 in the buffer to 0.
Fixes: b9e8d0168a ("ACPI: processor: Set CAP_SMP_T_SWCOORD in arch_acpi_set_proc_cap_bits()")
Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Commit fd49f99c18 ("ACPI: NUMA: Add a node and memblk for each
CFMWS not in SRAT") did not account for the case where the BIOS
only partially describes a CFMWS Window in the SRAT. That means
the omitted address ranges, of a partially described CFMWS Window,
do not get assigned to a NUMA node.
Replace the call to phys_to_target_node() with numa_add_memblks().
Numa_add_memblks() searches an HPA range for existing memblk(s)
and extends those memblk(s) to fill the entire CFMWS Window.
Extending the existing memblks is a simple strategy that reuses
SRAT defined proximity domains from part of a window to fill out
the entire window, based on the knowledge* that all of a CFMWS
window is of a similar performance class.
*Note that this heuristic will evolve when CFMWS Windows present
a wider range of characteristics. The extension of the proximity
domain, implemented here, is likely a step in developing a more
sophisticated performance profile in the future.
There is no change in behavior when the SRAT does not describe
the CFMWS Window at all. In that case, a new NUMA node with a
single memblk covering the entire CFMWS Window is created.
Fixes: fd49f99c18 ("ACPI: NUMA: Add a node and memblk for each CFMWS not in SRAT")
Reported-by: Derick Marks <derick.w.marks@intel.com>
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Tested-by: Derick Marks <derick.w.marks@intel.com>
Link: https://lore.kernel.org/all/eaa0b7cffb0951a126223eef3cbe7b55b8300ad9.1689018477.git.alison.schofield%40intel.com
Add 'const' to the definition of the 'trip' argument of the
.get_trend() thermal zone callback to indicate that the trip point
passed to it should not be modified by it and adjust the
callback functions implementing it, thermal_get_trend() in the
ACPI thermal driver and __ti_thermal_get_trend(), accordingly.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Michal Wilczynski <michal.wilczynski@intel.com>
The Itanium architecture is obsolete, and an informal survey [0] reveals
that any residual use of Itanium hardware in production is mostly HP-UX
or OpenVMS based. The use of Linux on Itanium appears to be limited to
enthusiasts that occasionally boot a fresh Linux kernel to see whether
things are still working as intended, and perhaps to churn out some
distro packages that are rarely used in practice.
None of the original companies behind Itanium still produce or support
any hardware or software for the architecture, and it is listed as
'Orphaned' in the MAINTAINERS file, as apparently, none of the engineers
that contributed on behalf of those companies (nor anyone else, for that
matter) have been willing to support or maintain the architecture
upstream or even be responsible for applying the odd fix. The Intel
firmware team removed all IA-64 support from the Tianocore/EDK2
reference implementation of EFI in 2018. (Itanium is the original
architecture for which EFI was developed, and the way Linux supports it
deviates significantly from other architectures.) Some distros, such as
Debian and Gentoo, still maintain [unofficial] ia64 ports, but many have
dropped support years ago.
While the argument is being made [1] that there is a 'for the common
good' angle to being able to build and run existing projects such as the
Grid Community Toolkit [2] on Itanium for interoperability testing, the
fact remains that none of those projects are known to be deployed on
Linux/ia64, and very few people actually have access to such a system in
the first place. Even if there were ways imaginable in which Linux/ia64
could be put to good use today, what matters is whether anyone is
actually doing that, and this does not appear to be the case.
There are no emulators widely available, and so boot testing Itanium is
generally infeasible for ordinary contributors. GCC still supports IA-64
but its compile farm [3] no longer has any IA-64 machines. GLIBC would
like to get rid of IA-64 [4] too because it would permit some overdue
code cleanups. In summary, the benefits to the ecosystem of having IA-64
be part of it are mostly theoretical, whereas the maintenance overhead
of keeping it supported is real.
So let's rip off the band aid, and remove the IA-64 arch code entirely.
This follows the timeline proposed by the Debian/ia64 maintainer [5],
which removes support in a controlled manner, leaving IA-64 in a known
good state in the most recent LTS release. Other projects will follow
once the kernel support is removed.
[0] https://lore.kernel.org/all/CAMj1kXFCMh_578jniKpUtx_j8ByHnt=s7S+yQ+vGbKt9ud7+kQ@mail.gmail.com/
[1] https://lore.kernel.org/all/0075883c-7c51-00f5-2c2d-5119c1820410@web.de/
[2] https://gridcf.org/gct-docs/latest/index.html
[3] https://cfarm.tetaneutral.net/machines/list/
[4] https://lore.kernel.org/all/87bkiilpc4.fsf@mid.deneb.enyo.de/
[5] https://lore.kernel.org/all/ff58a3e76e5102c94bb5946d99187b358def688a.camel@physik.fu-berlin.de/
Acked-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
- Check if the Tegra BPMP supports the trip points in order to set the
.set_trips callback (Mikko Perttunen).
- Add new Loongson-2 thermal sensor along with the DT bindings (Yinbo
Zhu).
- Use IS_ERR_OR_NULL() helper to replace a double test on the TI
bandgap sensor (Li Zetao).
- Remove redundant platform_set_drvdata() calls, as there are no
corresponding calls to platform_get_drvdata(), from a bunch of
drivers (Andrei Coardos).
- Switch the Mediatek LVTS mode to filtered in order to enable
interrupts (Nícolas F. R. A. Prado).
- Fix Wvoid-pointer-to-enum-cast warning on the Exynos TMU (Krzysztof
Kozlowski).
- Remove redundant dev_err_probe(), because the underlying function
already called it, from the Mediatek sensor (Chen Jiahao).
- Free calibration nvmem after reading it on sun8i (Mark Brown).
- Remove useless comment from the sun8i driver (Yangtao Li).
- Make tsens_xxxx_nvmem static to fix a sparse warning on QCom
tsens (Min-Hua Chen).
- Remove error message at probe deferral on imx8mm (Ahmad Fatoum).
- Fix parameter check in lvts_debugfs_init() with IS_ERR() on
Mediatek LVTS (Minjie Du).
- Fix interrupt routine and configuratoin for Mediatek LVTS (Nícolas
F. R. A. Prado).
- Drop unused .get_trip_type(), .get_trip_temp() and .get_trip_hyst()
thermal zone callbacks from the core and rework the .get_trend()
one to take a trip point pointer as an argument (Rafael Wysocki).
-----BEGIN PGP SIGNATURE-----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=I19o
-----END PGP SIGNATURE-----
Merge tag 'thermal-6.6-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more thermal control updates from Rafael Wysocki:
"These are mostly updates of thermal control drivers for ARM platforms,
new thermal control support for Loongson-2 and a couple of core
cleanups made possible by recent changes merged previously.
Specifics:
- Check if the Tegra BPMP supports the trip points in order to set
the .set_trips callback (Mikko Perttunen)
- Add new Loongson-2 thermal sensor along with the DT bindings (Yinbo
Zhu)
- Use IS_ERR_OR_NULL() helper to replace a double test on the TI
bandgap sensor (Li Zetao)
- Remove redundant platform_set_drvdata() calls, as there are no
corresponding calls to platform_get_drvdata(), from a bunch of
drivers (Andrei Coardos)
- Switch the Mediatek LVTS mode to filtered in order to enable
interrupts (Nícolas F. R. A. Prado)
- Fix Wvoid-pointer-to-enum-cast warning on the Exynos TMU (Krzysztof
Kozlowski)
- Remove redundant dev_err_probe(), because the underlying function
already called it, from the Mediatek sensor (Chen Jiahao)
- Free calibration nvmem after reading it on sun8i (Mark Brown)
- Remove useless comment from the sun8i driver (Yangtao Li)
- Make tsens_xxxx_nvmem static to fix a sparse warning on QCom tsens
(Min-Hua Chen)
- Remove error message at probe deferral on imx8mm (Ahmad Fatoum)
- Fix parameter check in lvts_debugfs_init() with IS_ERR() on
Mediatek LVTS (Minjie Du)
- Fix interrupt routine and configuratoin for Mediatek LVTS (Nícolas
F. R. A. Prado)
- Drop unused .get_trip_type(), .get_trip_temp() and .get_trip_hyst()
thermal zone callbacks from the core and rework the .get_trend()
one to take a trip point pointer as an argument (Rafael Wysocki)"
* tag 'thermal-6.6-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (29 commits)
thermal: core: Rework .get_trend() thermal zone callback
thermal: core: Drop unused .get_trip_*() callbacks
thermal/drivers/tegra-bpmp: Check if BPMP supports trip points
thermal: dt-bindings: add loongson-2 thermal
thermal/drivers/loongson-2: Add thermal management support
thermal/drivers/ti-soc-thermal: Use helper function IS_ERR_OR_NULL()
thermal/drivers/generic-adc: Removed unneeded call to platform_set_drvdata()
thermal/drivers/max77620_thermal: Removed unneeded call to platform_set_drvdata()
thermal/drivers/mediatek/auxadc_thermal: Removed call to platform_set_drvdata()
thermal/drivers/sun8i_thermal: Remove unneeded call to platform_set_drvdata()
thermal/drivers/broadcom/brcstb_thermal: Removed unneeded platform_set_drvdata()
thermal/drivers/mediatek/lvts_thermal: Make readings valid in filtered mode
thermal/drivers/k3_bandgap: Remove unneeded call to platform_set_drvdata()
thermal/drivers/k3_j72xx_bandgap: Removed unneeded call to platform_set_drvdata()
thermal/drivers/broadcom/sr-thermal: Removed call to platform_set_drvdata()
thermal/drivers/samsung: Fix Wvoid-pointer-to-enum-cast warning
thermal/drivers/db8500: Remove redundant of_match_ptr()
thermal/drivers/mediatek: Clean up redundant dev_err_probe()
thermal/drivers/sun8i: Free calibration nvmem after reading it
thermal/drivers/sun8i: Remove unneeded comments
...
Here is the big set of char/misc and other small driver subsystem
changes for 6.6-rc1.
Stuff all over the place here, lots of driver updates and changes and
new additions. Short summary is:
- new IIO drivers and updates
- Interconnect driver updates
- fpga driver updates and additions
- fsi driver updates
- mei driver updates
- coresight driver updates
- nvmem driver updates
- counter driver updates
- lots of smaller misc and char driver updates and additions
All of these have been in linux-next for a long time with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZPH64g8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynr2QCfd3RKeR+WnGzyEOFhksl30UJJhiIAoNZtYT5+
t9KG0iMDXRuTsOqeEQbd
=tVnk
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the big set of char/misc and other small driver subsystem
changes for 6.6-rc1.
Stuff all over the place here, lots of driver updates and changes and
new additions. Short summary is:
- new IIO drivers and updates
- Interconnect driver updates
- fpga driver updates and additions
- fsi driver updates
- mei driver updates
- coresight driver updates
- nvmem driver updates
- counter driver updates
- lots of smaller misc and char driver updates and additions
All of these have been in linux-next for a long time with no reported
problems"
* tag 'char-misc-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (267 commits)
nvmem: core: Notify when a new layout is registered
nvmem: core: Do not open-code existing functions
nvmem: core: Return NULL when no nvmem layout is found
nvmem: core: Create all cells before adding the nvmem device
nvmem: u-boot-env:: Replace zero-length array with DECLARE_FLEX_ARRAY() helper
nvmem: sec-qfprom: Add Qualcomm secure QFPROM support
dt-bindings: nvmem: sec-qfprom: Add bindings for secure qfprom
dt-bindings: nvmem: Add compatible for QCM2290
nvmem: Kconfig: Fix typo "drive" -> "driver"
nvmem: Explicitly include correct DT includes
nvmem: add new NXP QorIQ eFuse driver
dt-bindings: nvmem: Add t1023-sfp efuse support
dt-bindings: nvmem: qfprom: Add compatible for MSM8226
nvmem: uniphier: Use devm_platform_get_and_ioremap_resource()
nvmem: qfprom: do some cleanup
nvmem: stm32-romem: Use devm_platform_get_and_ioremap_resource()
nvmem: rockchip-efuse: Use devm_platform_get_and_ioremap_resource()
nvmem: meson-mx-efuse: Convert to devm_platform_ioremap_resource()
nvmem: lpc18xx_otp: Convert to devm_platform_ioremap_resource()
nvmem: brcm_nvram: Use devm_platform_get_and_ioremap_resource()
...
- Peter Xu has a series (mm/gup: Unify hugetlb, speed up thp") which
reduces the special-case code for handling hugetlb pages in GUP. It
also speeds up GUP handling of transparent hugepages.
- Peng Zhang provides some maple tree speedups ("Optimize the fast path
of mas_store()").
- Sergey Senozhatsky has improved te performance of zsmalloc during
compaction (zsmalloc: small compaction improvements").
- Domenico Cerasuolo has developed additional selftest code for zswap
("selftests: cgroup: add zswap test program").
- xu xin has doe some work on KSM's handling of zero pages. These
changes are mainly to enable the user to better understand the
effectiveness of KSM's treatment of zero pages ("ksm: support tracking
KSM-placed zero-pages").
- Jeff Xu has fixes the behaviour of memfd's
MEMFD_NOEXEC_SCOPE_NOEXEC_ENFORCED sysctl ("mm/memfd: fix sysctl
MEMFD_NOEXEC_SCOPE_NOEXEC_ENFORCED").
- David Howells has fixed an fscache optimization ("mm, netfs, fscache:
Stop read optimisation when folio removed from pagecache").
- Axel Rasmussen has given userfaultfd the ability to simulate memory
poisoning ("add UFFDIO_POISON to simulate memory poisoning with UFFD").
- Miaohe Lin has contributed some routine maintenance work on the
memory-failure code ("mm: memory-failure: remove unneeded PageHuge()
check").
- Peng Zhang has contributed some maintenance work on the maple tree
code ("Improve the validation for maple tree and some cleanup").
- Hugh Dickins has optimized the collapsing of shmem or file pages into
THPs ("mm: free retracted page table by RCU").
- Jiaqi Yan has a patch series which permits us to use the healthy
subpages within a hardware poisoned huge page for general purposes
("Improve hugetlbfs read on HWPOISON hugepages").
- Kemeng Shi has done some maintenance work on the pagetable-check code
("Remove unused parameters in page_table_check").
- More folioification work from Matthew Wilcox ("More filesystem folio
conversions for 6.6"), ("Followup folio conversions for zswap"). And
from ZhangPeng ("Convert several functions in page_io.c to use a
folio").
- page_ext cleanups from Kemeng Shi ("minor cleanups for page_ext").
- Baoquan He has converted some architectures to use the GENERIC_IOREMAP
ioremap()/iounmap() code ("mm: ioremap: Convert architectures to take
GENERIC_IOREMAP way").
- Anshuman Khandual has optimized arm64 tlb shootdown ("arm64: support
batched/deferred tlb shootdown during page reclamation/migration").
- Better maple tree lockdep checking from Liam Howlett ("More strict
maple tree lockdep"). Liam also developed some efficiency improvements
("Reduce preallocations for maple tree").
- Cleanup and optimization to the secondary IOMMU TLB invalidation, from
Alistair Popple ("Invalidate secondary IOMMU TLB on permission
upgrade").
- Ryan Roberts fixes some arm64 MM selftest issues ("selftests/mm fixes
for arm64").
- Kemeng Shi provides some maintenance work on the compaction code ("Two
minor cleanups for compaction").
- Some reduction in mmap_lock pressure from Matthew Wilcox ("Handle most
file-backed faults under the VMA lock").
- Aneesh Kumar contributes code to use the vmemmap optimization for DAX
on ppc64, under some circumstances ("Add support for DAX vmemmap
optimization for ppc64").
- page-ext cleanups from Kemeng Shi ("add page_ext_data to get client
data in page_ext"), ("minor cleanups to page_ext header").
- Some zswap cleanups from Johannes Weiner ("mm: zswap: three
cleanups").
- kmsan cleanups from ZhangPeng ("minor cleanups for kmsan").
- VMA handling cleanups from Kefeng Wang ("mm: convert to
vma_is_initial_heap/stack()").
- DAMON feature work from SeongJae Park ("mm/damon/sysfs-schemes:
implement DAMOS tried total bytes file"), ("Extend DAMOS filters for
address ranges and DAMON monitoring targets").
- Compaction work from Kemeng Shi ("Fixes and cleanups to compaction").
- Liam Howlett has improved the maple tree node replacement code
("maple_tree: Change replacement strategy").
- ZhangPeng has a general code cleanup - use the K() macro more widely
("cleanup with helper macro K()").
- Aneesh Kumar brings memmap-on-memory to ppc64 ("Add support for memmap
on memory feature on ppc64").
- pagealloc cleanups from Kemeng Shi ("Two minor cleanups for pcp list
in page_alloc"), ("Two minor cleanups for get pageblock migratetype").
- Vishal Moola introduces a memory descriptor for page table tracking,
"struct ptdesc" ("Split ptdesc from struct page").
- memfd selftest maintenance work from Aleksa Sarai ("memfd: cleanups
for vm.memfd_noexec").
- MM include file rationalization from Hugh Dickins ("arch: include
asm/cacheflush.h in asm/hugetlb.h").
- THP debug output fixes from Hugh Dickins ("mm,thp: fix sloppy text
output").
- kmemleak improvements from Xiaolei Wang ("mm/kmemleak: use
object_cache instead of kmemleak_initialized").
- More folio-related cleanups from Matthew Wilcox ("Remove _folio_dtor
and _folio_order").
- A VMA locking scalability improvement from Suren Baghdasaryan
("Per-VMA lock support for swap and userfaults").
- pagetable handling cleanups from Matthew Wilcox ("New page table range
API").
- A batch of swap/thp cleanups from David Hildenbrand ("mm/swap: stop
using page->private on tail pages for THP_SWAP + cleanups").
- Cleanups and speedups to the hugetlb fault handling from Matthew
Wilcox ("Change calling convention for ->huge_fault").
- Matthew Wilcox has also done some maintenance work on the MM subsystem
documentation ("Improve mm documentation").
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZO1JUQAKCRDdBJ7gKXxA
jrMwAP47r/fS8vAVT3zp/7fXmxaJYTK27CTAM881Gw1SDhFM/wEAv8o84mDenCg6
Nfio7afS1ncD+hPYT8947UnLxTgn+ww=
=Afws
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2023-08-28-18-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- Some swap cleanups from Ma Wupeng ("fix WARN_ON in
add_to_avail_list")
- Peter Xu has a series (mm/gup: Unify hugetlb, speed up thp") which
reduces the special-case code for handling hugetlb pages in GUP. It
also speeds up GUP handling of transparent hugepages.
- Peng Zhang provides some maple tree speedups ("Optimize the fast path
of mas_store()").
- Sergey Senozhatsky has improved te performance of zsmalloc during
compaction (zsmalloc: small compaction improvements").
- Domenico Cerasuolo has developed additional selftest code for zswap
("selftests: cgroup: add zswap test program").
- xu xin has doe some work on KSM's handling of zero pages. These
changes are mainly to enable the user to better understand the
effectiveness of KSM's treatment of zero pages ("ksm: support
tracking KSM-placed zero-pages").
- Jeff Xu has fixes the behaviour of memfd's
MEMFD_NOEXEC_SCOPE_NOEXEC_ENFORCED sysctl ("mm/memfd: fix sysctl
MEMFD_NOEXEC_SCOPE_NOEXEC_ENFORCED").
- David Howells has fixed an fscache optimization ("mm, netfs, fscache:
Stop read optimisation when folio removed from pagecache").
- Axel Rasmussen has given userfaultfd the ability to simulate memory
poisoning ("add UFFDIO_POISON to simulate memory poisoning with
UFFD").
- Miaohe Lin has contributed some routine maintenance work on the
memory-failure code ("mm: memory-failure: remove unneeded PageHuge()
check").
- Peng Zhang has contributed some maintenance work on the maple tree
code ("Improve the validation for maple tree and some cleanup").
- Hugh Dickins has optimized the collapsing of shmem or file pages into
THPs ("mm: free retracted page table by RCU").
- Jiaqi Yan has a patch series which permits us to use the healthy
subpages within a hardware poisoned huge page for general purposes
("Improve hugetlbfs read on HWPOISON hugepages").
- Kemeng Shi has done some maintenance work on the pagetable-check code
("Remove unused parameters in page_table_check").
- More folioification work from Matthew Wilcox ("More filesystem folio
conversions for 6.6"), ("Followup folio conversions for zswap"). And
from ZhangPeng ("Convert several functions in page_io.c to use a
folio").
- page_ext cleanups from Kemeng Shi ("minor cleanups for page_ext").
- Baoquan He has converted some architectures to use the
GENERIC_IOREMAP ioremap()/iounmap() code ("mm: ioremap: Convert
architectures to take GENERIC_IOREMAP way").
- Anshuman Khandual has optimized arm64 tlb shootdown ("arm64: support
batched/deferred tlb shootdown during page reclamation/migration").
- Better maple tree lockdep checking from Liam Howlett ("More strict
maple tree lockdep"). Liam also developed some efficiency
improvements ("Reduce preallocations for maple tree").
- Cleanup and optimization to the secondary IOMMU TLB invalidation,
from Alistair Popple ("Invalidate secondary IOMMU TLB on permission
upgrade").
- Ryan Roberts fixes some arm64 MM selftest issues ("selftests/mm fixes
for arm64").
- Kemeng Shi provides some maintenance work on the compaction code
("Two minor cleanups for compaction").
- Some reduction in mmap_lock pressure from Matthew Wilcox ("Handle
most file-backed faults under the VMA lock").
- Aneesh Kumar contributes code to use the vmemmap optimization for DAX
on ppc64, under some circumstances ("Add support for DAX vmemmap
optimization for ppc64").
- page-ext cleanups from Kemeng Shi ("add page_ext_data to get client
data in page_ext"), ("minor cleanups to page_ext header").
- Some zswap cleanups from Johannes Weiner ("mm: zswap: three
cleanups").
- kmsan cleanups from ZhangPeng ("minor cleanups for kmsan").
- VMA handling cleanups from Kefeng Wang ("mm: convert to
vma_is_initial_heap/stack()").
- DAMON feature work from SeongJae Park ("mm/damon/sysfs-schemes:
implement DAMOS tried total bytes file"), ("Extend DAMOS filters for
address ranges and DAMON monitoring targets").
- Compaction work from Kemeng Shi ("Fixes and cleanups to compaction").
- Liam Howlett has improved the maple tree node replacement code
("maple_tree: Change replacement strategy").
- ZhangPeng has a general code cleanup - use the K() macro more widely
("cleanup with helper macro K()").
- Aneesh Kumar brings memmap-on-memory to ppc64 ("Add support for
memmap on memory feature on ppc64").
- pagealloc cleanups from Kemeng Shi ("Two minor cleanups for pcp list
in page_alloc"), ("Two minor cleanups for get pageblock
migratetype").
- Vishal Moola introduces a memory descriptor for page table tracking,
"struct ptdesc" ("Split ptdesc from struct page").
- memfd selftest maintenance work from Aleksa Sarai ("memfd: cleanups
for vm.memfd_noexec").
- MM include file rationalization from Hugh Dickins ("arch: include
asm/cacheflush.h in asm/hugetlb.h").
- THP debug output fixes from Hugh Dickins ("mm,thp: fix sloppy text
output").
- kmemleak improvements from Xiaolei Wang ("mm/kmemleak: use
object_cache instead of kmemleak_initialized").
- More folio-related cleanups from Matthew Wilcox ("Remove _folio_dtor
and _folio_order").
- A VMA locking scalability improvement from Suren Baghdasaryan
("Per-VMA lock support for swap and userfaults").
- pagetable handling cleanups from Matthew Wilcox ("New page table
range API").
- A batch of swap/thp cleanups from David Hildenbrand ("mm/swap: stop
using page->private on tail pages for THP_SWAP + cleanups").
- Cleanups and speedups to the hugetlb fault handling from Matthew
Wilcox ("Change calling convention for ->huge_fault").
- Matthew Wilcox has also done some maintenance work on the MM
subsystem documentation ("Improve mm documentation").
* tag 'mm-stable-2023-08-28-18-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (489 commits)
maple_tree: shrink struct maple_tree
maple_tree: clean up mas_wr_append()
secretmem: convert page_is_secretmem() to folio_is_secretmem()
nios2: fix flush_dcache_page() for usage from irq context
hugetlb: add documentation for vma_kernel_pagesize()
mm: add orphaned kernel-doc to the rst files.
mm: fix clean_record_shared_mapping_range kernel-doc
mm: fix get_mctgt_type() kernel-doc
mm: fix kernel-doc warning from tlb_flush_rmaps()
mm: remove enum page_entry_size
mm: allow ->huge_fault() to be called without the mmap_lock held
mm: move PMD_ORDER to pgtable.h
mm: remove checks for pte_index
memcg: remove duplication detection for mem_cgroup_uncharge_swap
mm/huge_memory: work on folio->swap instead of page->private when splitting folio
mm/swap: inline folio_set_swap_entry() and folio_swap_entry()
mm/swap: use dedicated entry for swap in folio
mm/swap: stop using page->private on tail pages for THP_SWAP
selftests/mm: fix WARNING comparing pointer to 0
selftests: cgroup: fix test_kmem_memcg_deletion kernel mem check
...
Passing a struct thermal_trip pointer instead of a trip index to the
.get_trend() thermal zone callback allows one of its 2 implementations,
the thermal_get_trend() function in the ACPI thermal driver, to be
simplified quite a bit, and the other implementation of it in the
ti-soc-thermal driver does not even use the relevant callback argument.
For this reason, change the .get_trend() thermal zone callback
definition and adjust the related code accordingly.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
- Update the ACPICA code in the kernel to upstream revision 20230628
including the following changes:
* Suppress a GCC 12 dangling-pointer warning (Philip Prindeville).
* Reformat the ACPI_STATE_COMMON macro and its users (George Guo).
* Replace the ternary operator with ACPI_MIN() (Jiangshan Yi).
* Add support for _DSC as per ACPI 6.5 (Saket Dumbre).
* Remove a duplicate macro from zephyr header (Najumon B.A).
* Add data structures for GED and _EVT tracking (Jose Marinho).
* Fix misspelled CDAT DSMAS define (Dave Jiang).
* Simplify an error message in acpi_ds_result_push() (Christophe
Jaillet).
* Add a struct size macro related to SRAT (Dave Jiang).
* Add AML_NO_OPERAND_RESOLVE flag to Timer (Abhishek Mainkar).
* Add support for RISC-V external interrupt controllers in MADT (Sunil
V L).
* Add RHCT flags, CMO and MMU nodes (Sunil V L).
* Change ACPICA version to 20230628 (Bob Moore).
- Introduce new wrappers for ACPICA notify handler install/remove and
convert multiple drivers to using their own Notify() handlers instead
of the ACPI bus type .notify() slated for removal (Michal Wilczynski).
- Add backlight=native DMI quirk for Apple iMac12,1 and iMac12,2 (Hans
de Goede).
- Put ACPI video and its child devices explicitly into D0 on boot to
avoid platform firmware confusion (Kai-Heng Feng).
- Add backlight=native DMI quirk for Lenovo Ideapad Z470 (Jiri Slaby).
- Support obtaining physical CPU ID from MADT on LoongArch (Bibo Mao).
- Convert ACPI CPU initialization to using _OSC instead of _PDC that
has been depreceted since 2018 and dropped from the specification in
ACPI 6.5 (Michal Wilczynski, Rafael Wysocki).
- Drop non-functional nocrt parameter from ACPI thermal (Mario
Limonciello).
- Clean up the ACPI thermal driver, rework the handling of firmware
notifications in it and make it provide a table of generic trip point
structures to the core during initialization (Rafael Wysocki).
- Defer enumeration of devices with _DEP pointing to IVSC (Wentong Wu).
- Install SystemCMOS address space handler for ACPI000E (TAD) to meet
platform firmware expectations on some platforms (Zhang Rui).
- Fix finding the generic error data in the ACPi extlog driver for
compatibility with old and new firmware interface versions (Xiaochun
Lee).
- Remove assorted unused declarations of functions (Yue Haibing).
- Move AMBA bus scan handling into arm64 specific directory (Sudeep
Holla).
- Fix and clean up suspend-to-idle interface for AMD systems (Mario
Limonciello, Andy Shevchenko).
- Fix string truncation warning in pnpacpi_add_device() (Sunil V L).
-----BEGIN PGP SIGNATURE-----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=aXc6
-----END PGP SIGNATURE-----
Merge tag 'acpi-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"These include new ACPICA material, a rework of the ACPI thermal
driver, a switch-over of the ACPI processor driver to using _OSC
instead of (long deprecated) _PDC for CPU initialization, a rework of
firmware notifications handling in several drivers, fixes and cleanups
for suspend-to-idle handling on AMD systems, ACPI backlight driver
updates and more.
Specifics:
- Update the ACPICA code in the kernel to upstream revision 20230628
including the following changes:
- Suppress a GCC 12 dangling-pointer warning (Philip Prindeville)
- Reformat the ACPI_STATE_COMMON macro and its users (George Guo)
- Replace the ternary operator with ACPI_MIN() (Jiangshan Yi)
- Add support for _DSC as per ACPI 6.5 (Saket Dumbre)
- Remove a duplicate macro from zephyr header (Najumon B.A)
- Add data structures for GED and _EVT tracking (Jose Marinho)
- Fix misspelled CDAT DSMAS define (Dave Jiang)
- Simplify an error message in acpi_ds_result_push() (Christophe
Jaillet)
- Add a struct size macro related to SRAT (Dave Jiang)
- Add AML_NO_OPERAND_RESOLVE flag to Timer (Abhishek Mainkar)
- Add support for RISC-V external interrupt controllers in MADT
(Sunil V L)
- Add RHCT flags, CMO and MMU nodes (Sunil V L)
- Change ACPICA version to 20230628 (Bob Moore)
- Introduce new wrappers for ACPICA notify handler install/remove and
convert multiple drivers to using their own Notify() handlers
instead of the ACPI bus type .notify() slated for removal (Michal
Wilczynski)
- Add backlight=native DMI quirk for Apple iMac12,1 and iMac12,2
(Hans de Goede)
- Put ACPI video and its child devices explicitly into D0 on boot to
avoid platform firmware confusion (Kai-Heng Feng)
- Add backlight=native DMI quirk for Lenovo Ideapad Z470 (Jiri Slaby)
- Support obtaining physical CPU ID from MADT on LoongArch (Bibo Mao)
- Convert ACPI CPU initialization to using _OSC instead of _PDC that
has been depreceted since 2018 and dropped from the specification
in ACPI 6.5 (Michal Wilczynski, Rafael Wysocki)
- Drop non-functional nocrt parameter from ACPI thermal (Mario
Limonciello)
- Clean up the ACPI thermal driver, rework the handling of firmware
notifications in it and make it provide a table of generic trip
point structures to the core during initialization (Rafael Wysocki)
- Defer enumeration of devices with _DEP pointing to IVSC (Wentong
Wu)
- Install SystemCMOS address space handler for ACPI000E (TAD) to meet
platform firmware expectations on some platforms (Zhang Rui)
- Fix finding the generic error data in the ACPi extlog driver for
compatibility with old and new firmware interface versions
(Xiaochun Lee)
- Remove assorted unused declarations of functions (Yue Haibing)
- Move AMBA bus scan handling into arm64 specific directory (Sudeep
Holla)
- Fix and clean up suspend-to-idle interface for AMD systems (Mario
Limonciello, Andy Shevchenko)
- Fix string truncation warning in pnpacpi_add_device() (Sunil V L)"
* tag 'acpi-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (66 commits)
ACPI: x86: s2idle: Add a function to get LPS0 constraint for a device
ACPI: x86: s2idle: Add for_each_lpi_constraint() helper
ACPI: x86: s2idle: Add more debugging for AMD constraints parsing
ACPI: x86: s2idle: Fix a logic error parsing AMD constraints table
ACPI: x86: s2idle: Catch multiple ACPI_TYPE_PACKAGE objects
ACPI: x86: s2idle: Post-increment variables when getting constraints
ACPI: Adjust #ifdef for *_lps0_dev use
ACPI: TAD: Install SystemCMOS address space handler for ACPI000E
ACPI: Remove assorted unused declarations of functions
ACPI: extlog: Fix finding the generic error data for v3 structure
PNP: ACPI: Fix string truncation warning
ACPI: Remove unused extern declaration acpi_paddr_to_node()
ACPI: video: Add backlight=native DMI quirk for Apple iMac12,1 and iMac12,2
ACPI: video: Put ACPI video and its child devices into D0 on boot
ACPI: processor: LoongArch: Get physical ID from MADT
ACPI: scan: Defer enumeration of devices with a _DEP pointing to IVSC device
ACPI: thermal: Eliminate code duplication from acpi_thermal_notify()
ACPI: thermal: Drop unnecessary thermal zone callbacks
ACPI: thermal: Rework thermal_get_trend()
ACPI: thermal: Use trip point table to register thermal zones
...
CPU features and system registers:
* Advertise hinted conditional branch support (FEAT_HBC) to
userspace
* Avoid false positive "SANITY CHECK" warning when xCR registers
differ outside of the length field
Documentation:
* Fix macro name typo in SME documentation
Entry code:
* Unmask exceptions earlier on the system call entry path
Memory management:
* Don't bother clearing PTE_RDONLY for dirty ptes in
pte_wrprotect() and pte_modify()
Perf and PMU drivers:
* Initial support for Coresight TRBE devices on ACPI systems (the
coresight driver changes will come later)
* Fix hw_breakpoint single-stepping when called from bpf
* Fixes for DDR PMU on i.MX8MP SoC
* Add NUMA-awareness to Hisilicon PCIe PMU driver
* Fix locking dependency issue in Arm DMC620 PMU driver
* Workaround Hisilicon erratum 162001900 in the SMMUv3 PMU driver
* Add support for Arm CMN-700 r3 parts to the CMN PMU driver
* Add support for recent Arm Cortex CPU PMUs
* Update Hisilicon PMU maintainers
Selftests:
* Add a bunch of new features to the hwcap test (JSCVT, PMULL,
AES, SHA1, etc)
* Fix SSVE test to leave streaming-mode after grabbing the
signal context
* Add new test for SVE vector-length changes with SME enabled
Miscellaneous:
* Allow compiler to warn on suspicious looking system register
expressions
* Work around SDEI firmware bug by aborting any running
handlers on a kernel crash
* Fix some harmless warnings when building with W=1
* Remove some unused function declarations
* Other minor fixes and cleanup
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmTon4QQHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNG0nCAC9lTqppELnqXPA3FswONhtDBnKEufZHp0+
4+Z6CPjAYZpd7ruiezvxeZA62tZl3eX+tYOx+6lf4xYxFA5W/RQdmxM7e0mGJd+n
sgps85kxArApCgJR9zJiTCAIPXzKH5ObsFWWbcRljI9fiISVDTYn1JFAEx9UERI5
5yr6blYF2H115oD8V2f/0vVObGOAuiqNnzqJIuKL1I8H9xBK0pssrKvuCCN8J2o4
28+PeO7PzwWPiSfnO15bLd/bGuzbMCcexv4/DdjtLZaAanW7crJRVAzOon+URuVx
JXmkzQvXkOgSKnEFwfVRYTsUbtOz2cBafjSujVmjwIBymhbBCZR/
=WqmX
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
"I think we have a bit less than usual on the architecture side, but
that's somewhat balanced out by a large crop of perf/PMU driver
updates and extensions to our selftests.
CPU features and system registers:
- Advertise hinted conditional branch support (FEAT_HBC) to userspace
- Avoid false positive "SANITY CHECK" warning when xCR registers
differ outside of the length field
Documentation:
- Fix macro name typo in SME documentation
Entry code:
- Unmask exceptions earlier on the system call entry path
Memory management:
- Don't bother clearing PTE_RDONLY for dirty ptes in pte_wrprotect()
and pte_modify()
Perf and PMU drivers:
- Initial support for Coresight TRBE devices on ACPI systems (the
coresight driver changes will come later)
- Fix hw_breakpoint single-stepping when called from bpf
- Fixes for DDR PMU on i.MX8MP SoC
- Add NUMA-awareness to Hisilicon PCIe PMU driver
- Fix locking dependency issue in Arm DMC620 PMU driver
- Workaround Hisilicon erratum 162001900 in the SMMUv3 PMU driver
- Add support for Arm CMN-700 r3 parts to the CMN PMU driver
- Add support for recent Arm Cortex CPU PMUs
- Update Hisilicon PMU maintainers
Selftests:
- Add a bunch of new features to the hwcap test (JSCVT, PMULL, AES,
SHA1, etc)
- Fix SSVE test to leave streaming-mode after grabbing the signal
context
- Add new test for SVE vector-length changes with SME enabled
Miscellaneous:
- Allow compiler to warn on suspicious looking system register
expressions
- Work around SDEI firmware bug by aborting any running handlers on a
kernel crash
- Fix some harmless warnings when building with W=1
- Remove some unused function declarations
- Other minor fixes and cleanup"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (62 commits)
drivers/perf: hisi: Update HiSilicon PMU maintainers
arm_pmu: acpi: Add a representative platform device for TRBE
arm_pmu: acpi: Refactor arm_spe_acpi_register_device()
kselftest/arm64: Fix hwcaps selftest build
hw_breakpoint: fix single-stepping when using bpf_overflow_handler
arm64/sysreg: refactor deprecated strncpy
kselftest/arm64: add jscvt feature to hwcap test
kselftest/arm64: add pmull feature to hwcap test
kselftest/arm64: add AES feature check to hwcap test
kselftest/arm64: add SHA1 and related features to hwcap test
arm64: sysreg: Generate C compiler warnings on {read,write}_sysreg_s arguments
kselftest/arm64: build BTI tests in output directory
perf/imx_ddr: don't enable counter0 if none of 4 counters are used
perf/imx_ddr: speed up overflow frequency of cycle
drivers/perf: hisi: Schedule perf session according to locality
kselftest/arm64: fix a memleak in zt_regs_run()
perf/arm-dmc620: Fix dmc620_pmu_irqs_lock/cpu_hotplug_lock circular lock dependency
perf/smmuv3: Add MODULE_ALIAS for module auto loading
perf/smmuv3: Enable HiSilicon Erratum 162001900 quirk for HIP08/09
kselftest/arm64: Size sycall-abi buffers for the actual maximum VL
...
- one bugfix for x86 mixed mode that did not make it into v6.5
- first pass of cleanup for the EFI runtime wrappers
- some cosmetic touchups
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQQm/3uucuRGn1Dmh0wbglWLn0tXAUCZOx+LAAKCRAwbglWLn0t
XKzLAPwK8wIZ14NlC55NCtdvKEzK3N/muxKRqg2MAHfrbnREFgD9GgUxSbIEU2gz
BXQM9GLaP86qCXkZlPYktjP6RVfDYAk=
=e2mx
-----END PGP SIGNATURE-----
Merge tag 'efi-next-for-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI updates from Ard Biesheuvel:
"This primarily covers some cleanup work on the EFI runtime wrappers,
which are shared between all EFI architectures except Itanium, and
which provide some level of isolation to prevent faults occurring in
the firmware code (which runs at the same privilege level as the
kernel) from bringing down the system.
Beyond that, there is a fix that did not make it into v6.5, and some
doc fixes and dead code cleanup.
- one bugfix for x86 mixed mode that did not make it into v6.5
- first pass of cleanup for the EFI runtime wrappers
- some cosmetic touchups"
* tag 'efi-next-for-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
x86/efistub: Fix PCI ROM preservation in mixed mode
efi/runtime-wrappers: Clean up white space and add __init annotation
acpi/prmt: Use EFI runtime sandbox to invoke PRM handlers
efi/runtime-wrappers: Don't duplicate setup/teardown code
efi/runtime-wrappers: Remove duplicated macro for service returning void
efi/runtime-wrapper: Move workqueue manipulation out of line
efi/runtime-wrappers: Use type safe encapsulation of call arguments
efi/riscv: Move EFI runtime call setup/teardown helpers out of line
efi/arm64: Move EFI runtime call setup/teardown helpers out of line
efi/riscv: libstub: Fix comment about absolute relocation
efi: memmap: Remove kernel-doc warnings
efi: Remove unused extern declaration efi_lookup_mapped_addr()
Merge ACPI power management updates for 6.6-rc1:
- Fix and clean up suspend-to-idle interface for AMD systems (Mario
Limonciello, Andy Shevchenko).
* acpi-pm:
ACPI: x86: s2idle: Add a function to get LPS0 constraint for a device
ACPI: x86: s2idle: Add for_each_lpi_constraint() helper
ACPI: x86: s2idle: Add more debugging for AMD constraints parsing
ACPI: x86: s2idle: Fix a logic error parsing AMD constraints table
ACPI: x86: s2idle: Catch multiple ACPI_TYPE_PACKAGE objects
ACPI: x86: s2idle: Post-increment variables when getting constraints
ACPI: Adjust #ifdef for *_lps0_dev use
Merge ACPI device enumeration changes, ACPI TAD and extlog drivers
updates, and miscellaneous ACPI-related changes for 6.6-rc1:
- Defer enumeration of devices with _DEP pointing to IVSC (Wentong Wu).
- Install SystemCMOS address space handler for ACPI000E (TAD) to meet
platform firmware expectations on some platforms (Zhang Rui).
- Fix finding the generic error data in the ACPi extlog driver for
compatibility with old and new firmware interface versions (Xiaochun
Lee).
- Remove assorted unused declarations of functions (Yue Haibing).
- Move AMBA bus scan handling into arm64 specific directory (Sudeep
Holla).
* acpi-scan:
ACPI: scan: Defer enumeration of devices with a _DEP pointing to IVSC device
* acpi-tad:
ACPI: TAD: Install SystemCMOS address space handler for ACPI000E
* acpi-extlog:
ACPI: extlog: Fix finding the generic error data for v3 structure
* acpi-misc:
ACPI: Remove assorted unused declarations of functions
ACPI: Remove unused extern declaration acpi_paddr_to_node()
ACPI: Move AMBA bus scan handling into arm64 specific directory
Merge ACPI thermal driver changes for 6.6-rc1:
- Drop non-functional nocrt parameter from ACPI thermal (Mario
Limonciello).
- Clean up the ACPI thermal driver, rework the handling of firmware
notifications in it and make it provide a table of generic trip point
structures to the core during initialization (Rafael Wysocki).
* acpi-thermal:
ACPI: thermal: Eliminate code duplication from acpi_thermal_notify()
ACPI: thermal: Drop unnecessary thermal zone callbacks
ACPI: thermal: Rework thermal_get_trend()
ACPI: thermal: Use trip point table to register thermal zones
thermal: core: Rework and rename __for_each_thermal_trip()
ACPI: thermal: Introduce struct acpi_thermal_trip
ACPI: thermal: Carry out trip point updates under zone lock
ACPI: thermal: Clean up acpi_thermal_register_thermal_zone()
thermal: core: Add priv pointer to struct thermal_trip
thermal: core: Introduce thermal_zone_device_exec()
thermal: core: Do not handle trip points with invalid temperature
ACPI: thermal: Drop redundant local variable from acpi_thermal_resume()
ACPI: thermal: Do not attach private data to ACPI handles
ACPI: thermal: Drop enabled flag from struct acpi_thermal_active
ACPI: thermal: Drop nocrt parameter
Merge ACPI processor driver changes for 6.6-rc1:
- Support obtaining physical CPU ID from MADT on LoongArch (Bibo Mao).
- Convert ACPI CPU initialization to using _OSC instead of _PDC that
has been depreceted since 2018 and dropped from the specification in
ACPI 6.5 (Michal Wilczynski, Rafael Wysocki).
* acpi-processor:
ACPI: processor: LoongArch: Get physical ID from MADT
ACPI: processor: Refine messages in acpi_early_processor_control_setup()
ACPI: processor: Remove acpi_hwp_native_thermal_lvt_osc()
ACPI: processor: Use _OSC to convey OSPM processor support information
ACPI: processor: Introduce acpi_processor_osc()
ACPI: processor: Set CAP_SMP_T_SWCOORD in arch_acpi_set_proc_cap_bits()
ACPI: processor: Clear C_C2C3_FFH and C_C1_FFH in arch_acpi_set_proc_cap_bits()
ACPI: processor: Rename ACPI_PDC symbols
ACPI: processor: Refactor arch_acpi_set_pdc_bits()
ACPI: processor: Move processor_physically_present() to acpi_processor.c
ACPI: processor: Move MWAIT quirk out of acpi_processor.c
Merge changes related to the ACPI bus type and ACPI backlight driver
changes for 6.6-rc1:
- Introduce new wrappers for ACPICA notify handler install/remove and
convert multiple drivers to using their own Notify() handlers instead
of the ACPI bus type .notify() slated for removal (Michal Wilczynski).
- Add backlight=native DMI quirk for Apple iMac12,1 and iMac12,2 (Hans
de Goede).
- Put ACPI video and its child devices explicitly into D0 on boot to
avoid platform firmware confusion (Kai-Heng Feng).
- Add backlight=native DMI quirk for Lenovo Ideapad Z470 (Jiri Slaby).
* acpi-bus:
ACPI: thermal: Install Notify() handler directly
ACPI: NFIT: Remove unnecessary .remove callback
ACPI: NFIT: Install Notify() handler directly
ACPI: HED: Install Notify() handler directly
ACPI: battery: Install Notify() handler directly
ACPI: video: Install Notify() handler directly
ACPI: AC: Install Notify() handler directly
ACPI: bus: Set driver_data to NULL every time .add() fails
ACPI: bus: Introduce wrappers for ACPICA notify handler install/remove
* acpi-video:
ACPI: video: Add backlight=native DMI quirk for Apple iMac12,1 and iMac12,2
ACPI: video: Put ACPI video and its child devices into D0 on boot
ACPI: video: Add backlight=native DMI quirk for Lenovo Ideapad Z470
Merge ACPICA material for 6.6-rc1.
This includes some fixes, cleanups and new material, mostly related to
parsing tables.
Specifics:
- Suppress a GCC 12 dangling-pointer warning (Philip Prindeville).
- Reformat the ACPI_STATE_COMMON macro and its users (George Guo).
- Replace the ternary operator with ACPI_MIN() (Jiangshan Yi).
- Add support for _DSC as per ACPI 6.5 (Saket Dumbre).
- Remove a duplicate macro from zephyr header (Najumon B.A).
- Add data structures for GED and _EVT tracking (Jose Marinho).
- Fix misspelled CDAT DSMAS define (Dave Jiang).
- Simplify an error message in acpi_ds_result_push() (Christophe
Jaillet).
- Add a struct size macro related to SRAT (Dave Jiang).
- Add AML_NO_OPERAND_RESOLVE flag to Timer (Abhishek Mainkar).
- Add support for RISC-V external interrupt controllers in MADT (Sunil
V L).
- Add RHCT flags, CMO and MMU nodes (Sunil V L).
- Change ACPICA version to 20230628 (Bob Moore).
* acpica:
ACPICA: Update version to 20230628
ACPICA: RHCT: Add flags, CMO and MMU nodes
ACPICA: MADT: Add RISC-V external interrupt controllers
ACPICA: Add AML_NO_OPERAND_RESOLVE flag to Timer
ACPICA: Add a define for size of struct acpi_srat_generic_affinity device_handle
ACPICA: Slightly simplify an error message in acpi_ds_result_push()
ACPICA: Fix misspelled CDAT DSMAS define
ACPICA: Add interrupt command to acpiexec
ACPICA: Detect GED device and keep track of _EVT
ACPICA: fix for conflict macro definition on zephyr interface
ACPICA: Add support for _DSC as per ACPI 6.5
ACPICA: exserial.c: replace ternary operator with ACPI_MIN()
ACPICA: Modify ACPI_STATE_COMMON
ACPICA: Fix GCC 12 dangling-pointer warning
Coresight and hwtracing subsystem updates for Linux v6.6 includes:
- ACPI support for CoreSight ETMv4x via system instructions and Arm ETE (v9.x).
- Fix potential sleeping in atomic context for TRBE driver
- Fix memory leak in ACPI platform parsing code
- Fix all warnings with W=1
- Fix warning with double free attempt for TRBE platform data
- Miscellaneous cleanups and fixes
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
-----BEGIN PGP SIGNATURE-----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=KHsb
-----END PGP SIGNATURE-----
Merge tag 'coresight-next-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/coresight/linux into char-misc-next
Suzuki writes:
coresigh: Updates for v6.6
Coresight and hwtracing subsystem updates for Linux v6.6 includes:
- ACPI support for CoreSight ETMv4x via system instructions and Arm ETE (v9.x).
- Fix potential sleeping in atomic context for TRBE driver
- Fix memory leak in ACPI platform parsing code
- Fix all warnings with W=1
- Fix warning with double free attempt for TRBE platform data
- Miscellaneous cleanups and fixes
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
* tag 'coresight-next-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/coresight/linux:
coresight: trbe: Fix TRBE potential sleep in atomic context
coresight: Fix memory leak in acpi_buffer->pointer
coresight: etm4x: Ensure valid drvdata and clock before clk_put()
coresight: trbe: Allocate platform data per device
hwtracing: hisi_ptt: Use pci_dev_id() to simplify the code
coresight: dummy: simplify the code with module_platform_driver
coresight: tmc: Explicit type conversions to prevent integer overflow
coresight: trbe: Directly use ID_AA64DFR0_EL1_TraceBuffer_IMP
coresight: Fix all W=1 build warnings
coresight: etm4x: Add ACPI support in platform driver
coresight: platform: acpi: Ignore the absence of graph
coresight: etm4x: Change etm4_platform_driver driver for MMIO devices
coresight: etm4x: Drop pid argument from etm4_probe()
coresight: etm4x: Drop iomem 'base' argument from etm4_probe()
coresight: etm4x: Allocate and device assign 'struct etmv4_drvdata' earlier
hwtracing: coresight: Explicitly include correct DT includes
Instead of bypassing the kernel's adaptation layer for performing EFI
runtime calls, wire up ACPI PRM handling into it. This means these calls
can no longer occur concurrently with EFI runtime calls, and will be
made from the EFI runtime workqueue. It also means any page faults
occurring during PRM handling will be identified correctly as
originating in firmware code.
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
__efi_call_virt() exists as an alternative for efi_call_virt() for the
sole reason that ResetSystem() returns void, and so we cannot use a call
to it in the RHS of an assignment.
Given that there is only a single user, let's drop the macro, and expand
it into the caller. That way, the remaining macro can be tightened
somewhat in terms of type safety too.
Note that the use of typeof() on the runtime service invocation does not
result in an actual call being made, but it does require a few pointer
types to be fixed up and converted into the proper function pointer
prototypes.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
If not supported, fallback to not using memap on memmory. This avoids
the need for callers to do the fallback.
Link: https://lkml.kernel.org/r/20230808091501.287660-3-aneesh.kumar@linux.ibm.com
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Other parts of the kernel may use LPS0 constraints information to make
decisions on what power state to put a device into.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
[ rjw: Rewrite kerneldoc, rearrange if () statement, edit subject and
changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
We have one existing and one coming user of this macro.
Introduce a helper.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
While parsing the constraints show all the entries for the table
to aid with debugging other problems later.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The constraints table should be resetting the `list` object
after running through all of `info_obj` iterations.
This adjusts whitespace as well as less code will now be included
with each loop. This fixes a functional problem is fixed where a
badly formed package in the inner loop may have incorrect data.
Fixes: 146f1ed852 ("ACPI: PM: s2idle: Add AMD support to handle _DSM")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
If a badly constructed firmware includes multiple `ACPI_TYPE_PACKAGE`
objects while evaluating the AMD LPS0 _DSM, there will be a memory
leak. Explicitly guard against this.
Suggested-by: Bjorn Helgaas <helgaas@kernel.org>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
When code uses a pre-increment it makes the reader question "why".
In the constraint fetching code there is no reason for the variables
to be pre-incremented so adjust to post-increment.
No intended functional changes.
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Suggested-by: Bjorn Helgaas <helgaas@kernel.org>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
It turns out that some PCSpecialist Elimina Pro 16 M models
have "GM6BGEQ" as DMI product-name instead of "Elimina Pro 16 M",
causing the existing DMI quirk to not work on these models.
The DMI board-name is always "GM6BGEQ", so match on that instead.
Fixes: 56fec0051a ("ACPI: resource: Add IRQ override quirk for PCSpecialist Elimina Pro 16 M")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217394#c36
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Currently, the SystemCMOS address space handler is installed for the
ACPI RTC devices (PNP0B00/PNP0B01/PNP0B02) only. But there are platforms
with SystemCMOS Operetion Region defined under the ACPI Time and Alarm
Device (ACPI000E), which is used by the ACPI pre-defined control methods
like _GRT (Get the Real time) and _SRT (Set the Real time).
When accessing these control methods via the acpi_tad sysfs interface,
missing SystemCMOS address space handler causes errors like below
[ 478.255453] ACPI Error: No handler for Region [RTCM] (00000000a8d2dd39) [SystemCMOS] (20230331/evregion-130)
[ 478.255458] ACPI Error: Region SystemCMOS (ID=5) has no handler (20230331/exfldio-261)
[ 478.255461] Initialized Local Variables for Method [_GRT]:
[ 478.255461] Local1: 00000000f182542c <Obj> Integer 0000000000000000
[ 478.255464] No Arguments are initialized for method [_GRT]
[ 478.255465] ACPI Error: Aborting method \_SB.AWAC._GRT due to previous error (AE_NOT_EXIST) (20230331/psparse-529)
Export two APIs for SystemCMOS address space handler from acpi_cmos_rtc
scan handler and install the handler for the ACPI Time and Alarm Device
from the ACPI TAD driver.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217714
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
[ rjw: Subject and changelog edits, whitespace adjustment ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
acpi_create_dir()/acpi_remove_dir() are never implemented since
the beginning of git history.
Commit f8d3148962 ("ACPICA: Debugger: Convert some mechanisms to OSPM specific")
declared but never implemented acpi_run_debugger().
Commit 781d737c74 ("ACPI: Drop power resources driver")
removed acpi_power_init() but not its declaration.
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
[ rjw: Subject edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Fix by using acpi_hest_get_payload() to find out the correct
generic error data for v3 structure.
The revision v300 generic error data is different from the old one, so
for compatibility with old and new version, change to a new interface to
locate the right memory error section that was defined in CPER.
Signed-off-by: Xiaochun Lee <lixc17@lenovo.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Screen brightness can only be changed once on HP ZBook Fury 16 G10.
The vendor reports that the issue is related to the fact that Linux doesn't
invoke _PS0 at boot for all ACPI devices, as expected by the platform firmware:
Scope (\_SB.PC00.GFX0)
{
Scope (DD1F)
{
Method (_PS0, 0, Serialized) // _PS0: Power State 0
{
If (CondRefOf (\_SB.PC00.LPCB.EC0.SSBC))
{
\_SB.PC00.LPCB.EC0.SSBC ()
}
}
...
}
...
}
The \_SB.PC00.GFX0.DD1F is the panel device, and its _PS0 needs to be
executed at the initialization time to make the brightness control work
properly.
_PS0 is not evaluated for this device, because _PSC is missing,
which violates the ACPI specification (ACPI 6.5, section 7.3.6).
Commit b378549226 ("ACPI / PM: Do not power manage devices in unknown
initial states") tried to work around missing _PSC on platforms with
defective firmware, but got reverted due to a regression.
So the safest approach is to use acpi_device_fix_up_power_extended() to
put ACPI video and its child devices to D0 to address the issue at hand.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217683
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
With ACPI Spec 6.5 chapter 5.2.12.20, each processor in LoongArch
systems has a Core Programmable Interrupt Controller in MADT. The
value of its type is 0x11 in the spec and defined as enum variable
ACPI_MADT_TYPE_CORE_PIC in the Linux kernel.
Physical IDs can be retrieved from MADT for LoongArch systems during
initialization and they can be retrieved from the _MAT output for
hotplug CPUs.
Add physical CPU ID enumeration for LoongArch systems.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Inside IVSC, switching ownership requires an interface with two
different hardware modules, ACE and CSI. The software interface
to these modules is based on Intel MEI framework. Usually mei
client devices are dynamically created, so the info of consumers
depending on mei client devices is not present in the firmware
tables.
This causes problems with the probe ordering with respect to
drivers for consumers of these MEI client devices. But on these
camera sensor devices, the ACPI nodes describing the sensors all
have a _DEP dependency on the matching MEI bus ACPI device, so
adding IVSC MEI bus ACPI device to acpi_honor_dep_ids allows
solving the probe-ordering problem by deferring the enumeration of
ACPI-devices which have a _DEP dependency on an IVSC mei bus ACPI
device.
On TGL platform, the HID of IVSC MEI bus ACPI device is INTC1059,
and on ADL platform, the HID is INTC1095. So add both of them to
acpi_honor_dep_ids.
Signed-off-by: Wentong Wu <wentong.wu@intel.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Move the acpi_bus_generate_netlink_event() invocation into
acpi_thermal_trips_update() which allows the code duplication in
acpi_thermal_notify() to be cleaned up, but for this purpose the
event value needs to be passed to acpi_thermal_trips_update() and
from there to acpi_thermal_adjust_thermal_zone() which has to
determine the flag value for __acpi_thermal_trips_update() by
itself.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Drop the .get_trip_type(), .get_trip_temp() and .get_crit_temp() thermal
zone callbacks that are not necessary any more from the ACPI thermal
driver along with the corresponding callback functions.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Rework the ACPI thermal driver's .get_trend() callback function,
thermal_get_trend(), so that it does not call thermal_get_trip_type()
and thermal_get_trip_temp() which are going to be dropped.
This reduces the overhead of the function too, because it will always
carry out a trip point lookup once after the change.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Make the ACPI thermal driver use thermal_zone_device_register_with_trips()
to register its thermal zones.
For this purpose, make it create a trip point table that will be passed to
thermal_zone_device_register_with_trips() as an argument.
Also use the thermal_zone_update_trip_temp() helper introduced
previously to update temperatures of the passive and active trip
points after a trip points change notification from the platform
firmware.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add struct acpi_thermal_trip to contain the temperature and valid flag
of each trip point in the driver's local data structures.
This helps to make the subsequent changes more straightforward.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
There is a race condition between acpi_thermal_trips_update() and
acpi_thermal_check_fn(), because the trip points may get updated while
the latter is running which in theory may lead to inconsistent results.
For example, if two trips are updated together, using the temperature
value of one of them from before the update and the temperature value
of the other one from after the update may not lead to the expected
outcome.
Moreover, if thermal_get_trend() runs when a trip points update is in
progress, it may end up using stale trip point temperatures.
To address this, make acpi_thermal_trips_update() call
thermal_zone_device_exec() to carry out the trip points update and
use a new acpi_thermal_adjust_thermal_zone() wrapper around
__acpi_thermal_trips_update() as the callback function for the latter.
While at it, change the acpi_thermal_trips_update() return data type
to void as that function always returns 0 anyway.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Rename the trips variable in acpi_thermal_register_thermal_zone() to
trip_count so its name better reflects the purpose, rearrange white
space in the loop over active trips for clarity and reduce code
duplication related to calling thermal_zone_device_register() by
using an extra local variable to store the passive delay value.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Some HiSilicon SMMU PMCG suffers the erratum 162001900 that the PMU
disable control sometimes fail to disable the counters. This will lead
to error or inaccurate data since before we enable the counters the
counter's still counting for the event used in last perf session.
This patch tries to fix this by hardening the global disable process.
Before disable the PMU, writing an invalid event type (0xffff) to
focibly stop the counters. Correspondingly restore each events on
pmu::pmu_enable().
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20230814124012.58013-1-yangyicong@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
Highlights:
- lenovo-ymc driver causes keyboard + touchpad to not work with >= 6.4
on some Thinkbook models, fix this
- A set of small fixes for mlx-platform
- Other small fixes and hw-id additions
The following is an automated git shortlog grouped by driver:
ACPI:
- scan: Create platform device for CS35L56
ISST:
- Reduce noise for missing numa information in logs
lenovo-ymc:
- Only bind on machines with a convertible DMI chassis-type
msi-ec:
- Fix the build
platform:
- mellanox: Change register offset addresses
- mellanox: mlx-platform: Modify graceful shutdown callback and power down mask
- mellanox: mlx-platform: Fix signals polarity and latch mask
- mellanox: Fix order in exit flow
platform/x86/amd/pmf:
- Fix unsigned comparison with less than zero
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmTY8C8UHGhkZWdvZWRl
QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9y+wQf/cPZjYmoP/vXbWwBuwmfU66hB8Ihh
eraGayATU1hixLQGv0N9PbLLkGNzDAzLfhxolK3td+Qv1ZBxOlLKaoGGxtEHGQUd
NvpbUAIS0oPxzs8georh3SaxvzJ34u3YKn2Tq/NBXtyb23IVdX2mWiGVhmp6sSs2
vePh4lVNxGpjXe9oQW+99ze1zlgZjlA/HHvm8a2CnerG8Tf9fSDWeQsLRTCukE8t
J61myAuZURFoZTqgGwVXuA9kYJoifNlpD6+PtBYIVPtJizm34UmfJNzV7TIpDISI
E7+OPppFIHrTYPQWlIROZmN3pRXisw4gCAbBd2f8ZjkcFgB5S0rnGwb6gg==
=Hd1i
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.5-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform drivers fixes from Hans de Goede:
- lenovo-ymc driver causes keyboard + touchpad to not work with >= 6.4
on some Thinkbook models, fix this
- A set of small fixes for mlx-platform
- Other small fixes and hw-id additions
* tag 'platform-drivers-x86-v6.5-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: lenovo-ymc: Only bind on machines with a convertible DMI chassis-type
platform: mellanox: Change register offset addresses
platform: mellanox: mlx-platform: Modify graceful shutdown callback and power down mask
platform: mellanox: mlx-platform: Fix signals polarity and latch mask
platform: mellanox: Fix order in exit flow
platform/x86: ISST: Reduce noise for missing numa information in logs
platform/x86: msi-ec: Fix the build
ACPI: scan: Create platform device for CS35L56
platform/x86/amd/pmf: Fix unsigned comparison with less than zero
Commit dabc621a31 ("ACPI: thermal: Drop enabled flag from struct
acpi_thermal_active") left behind a variable that is only assigned to
and never read, so drop it now.
Fixes: dabc621a31 ("ACPI: thermal: Drop enabled flag from struct acpi_thermal_active")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The PCSpecialist Elimina Pro 16 M laptop model is a Zen laptop which
needs to use the MADT IRQ settings override and which does not have
an INT_SRC_OVR entry for IRQ 1 in its MADT.
So this model needs a DMI quirk to enable the MADT IRQ settings override
to fix its keyboard not working.
Fixes: a9c4a912b7 ("ACPI: resource: Remove "Zen" specific match and quirks")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217394#c18
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
On AMD Zen acpi_dev_irq_override() by default prefers the DSDT IRQ 1
settings over the MADT settings.
This causes the keyboard to malfunction on some laptop models
(see Links), all models from the Links have an INT_SRC_OVR MADT entry
for IRQ 1.
Fixes: a9c4a912b7 ("ACPI: resource: Remove "Zen" specific match and quirks")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217336
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217394
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217406
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
All the cases, were the DSDT IRQ settings should be used instead of
the MADT override, are for IRQ 1 or 12, the PS/2 kbd resp. mouse IRQs.
Simplify things by always honering the override for other legacy IRQs
(for non DMI quirked cases).
This allows removing the DMI quirks to honor the override for
some non i8042 IRQs on some AMD ZEN based Lenovo models.
Fixes: a9c4a912b7 ("ACPI: resource: Remove "Zen" specific match and quirks")
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The ACPI thermal driver uses acpi_bus_attach_private_data() to attach
the thermal zone object to the ACPI handle of the thermal zone and
acpi_bus_detach_private_data() to clean that up, but it never uses
acpi_bus_get_private_data() to retrieve that object.
Drop the unneded acpi_bus_attach_private_data() and
acpi_bus_detach_private_data() calls from the ACPI thermal driver and
clean up the related code.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
The enabled field of struct acpi_thermal_active is only updated and never
read, so drop it along with the related code.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Commit fcea0ccf4f ("ACPI: bus: Consolidate all arm specific
initialisation into acpi_arm_init()") moved all of the ARM-specific
initialization into acpi_arm_init(). However, acpi_amba.c being outside
of drivers/acpi/arm64 got ignored and hence acpi_amba_init() was not
moved into acpi_arm_init().
Move the AMBA platform bus support into arm64 specific folder and make
acpi_amba_init() part of acpi_arm_init().
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The ACPI device CSC3556 is a Cirrus Logic CS35L56 mono amplifier which
is used in multiples, and can be connected either to I2C or SPI.
There will be multiple instances under the same Device() node. Add it
to ignore_serial_bus_ids and handle it in the serial-multi-instantiate
driver.
There can be a 5th I2cSerialBusV2, but this is an alias address and doesn't
represent a real device. Ignore this by having a dummy 5th entry in the
serial-multi-instantiate instance list with the name of a non-existent
driver, on the same pattern as done for bsg2150.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20230728111345.7224-1-rf@opensource.cirrus.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
According to the ARM IORT specifications DEN 0049 issue E,
the "Number of IDs" field in the ID mapping format reports
the number of IDs in the mapping range minus one.
In iort_node_get_rmr_info(), we erroneously skip ID mappings
whose "Number of IDs" equal to 0, resulting in valid mapping
nodes with a single ID to map being skipped, which is wrong.
Fix iort_node_get_rmr_info() by removing the bogus id_count
check.
Fixes: 491cf4a673 ("ACPI/IORT: Add support to retrieve IORT RMR reserved regions")
Signed-off-by: Guanghui Feng <guanghuifeng@linux.alibaba.com>
Cc: <stable@vger.kernel.org> # 6.0.x
Acked-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Tested-by: Hanjun Guo <guohanjun@huawei.com>
Link: https://lore.kernel.org/r/1689593625-45213-1-git-send-email-guanghuifeng@linux.alibaba.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Drop ETM4X ACPI ID from the AMBA ACPI device list, and instead just move it
inside the new ACPI devices list detected and used via platform driver.
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Len Brown <lenb@kernel.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Lorenzo Pieralisi <lpieralisi@kernel.org>
Cc: linux-acpi@vger.kernel.org
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> (for ACPI specific changes)
Acked-by: "Rafael J. Wysocki" <rafael@kernel.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Tested-by: Tanmay Jagdale <tanmay@marvell.com>
Link: https://lore.kernel.org/r/20230710062500.45147-7-anshuman.khandual@arm.com
The source and meaning of the messages printed by
acpi_early_processor_control_setup() is unclear, so add a pr_fmt()
definition to acpi_processor.c and expand the messages to make it
clear that they are about CPUs.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Michal Wilczynski <michal.wilczynski@intel.com>
The `nocrt` module parameter has no code associated with it and does
nothing. As `crt=-1` has same functionality as what nocrt should be
doing drop `nocrt` and associated documentation.
This should fix a quirk for Gigabyte GA-7ZX that used `nocrt` and
thus didn't function properly.
Fixes: 8c99fdce30 ("ACPI: thermal: set "thermal.nocrt" via DMI on Gigabyte GA-7ZX")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The Lenovo Ideapad Z470 predates Windows 8, so it defaults to using
acpi_video for backlight control. But this is not functional on this
model.
Add a DMI quirk to use the native backlight interface which works.
Link: https://bugzilla.suse.com/show_bug.cgi?id=1208724
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The workaround for buggy skylake BIOSes is now implemented in
acpi_processor_osc() and acpi_hwp_native_thermal_lvt_osc() has no
callers, so drop it.
Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Change acpi_early_processor_osc() to return a value in case of a
failure and make it static.
Also make it run acpi_processor_osc() for every processor object or
processor device found in the ACPI Namespace (previously, its only purpose
was to work around platform firmware defects on Skylake systems).
Introduce a new function called acpi_early_processor_control_setup() that
will invoke acpi_early_processor_osc() first in order to convey the OS
processor support information to the platform firmware and if that fails,
it will fall back to using _PDC.
Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
[ rjw: Subject and changelog edits, change function return value to bool,
add missing 'static', change messages ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Modify the ACPI thermal driver to install its own Notify() handler
directly instead of providing an ACPI driver .notify() callback.
This will allow the ACPI driver .notify() callback to be eliminated and
it will allow the thermal driver to be switched over to a platform one
in the future.
While at it, fix up whitespaces in acpi_thermal_remove().
Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com>
[ rjw: Subject and changelog edits, whitespace adjustments ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The ACPI NFIT driver provides an empty function as it's .remove() callback
which is not necessary, so drop the empty acpi_nfit_remove() and the
.remove() callback initialization from it.
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Modify the ACPI NFIT driver to install its own Notify() handler directly
instead of providing an ACPI driver .notify() callback.
This will allow the ACPI driver .notify() callback to be eliminated.
Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com>
[ rjw: Subject and changelog edits, whitespace adjustments ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Modify the ACPI HED driver to install its own Notify() handler directly
instead of providing an ACPI driver .notify() callback.
This will allow the ACPI driver .notify() callback to be eliminated and
it will allow the HED driver to be switched over to a platform one in
the future.
Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com>
[ rjw: Subject and changelog edits, whitespace adjustments ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Modify the ACPI battery driver to install its own Notify() handler
directly instead of providing an ACPI driver .notify() callback.
This will allow the ACPI driver .notify() callback to be eliminated and
it will allow the battery driver to be switched over to a platform one
in the future.
While at it, fix up whitespaces in acpi_battery_remove().
Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com>
[ rjw: Subject and changelog edits, whitespace adjustments ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Modify the ACPI video driver to install its own Notify() handler directly
instead of providing an ACPI driver .notify() callback.
This will allow the ACPI driver .notify() callback to be eliminated and
it will allow the ideo driver to be switched over to a platform one in
the future.
Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com>
[ rjw: Subject and changelog edits, whitespace adjustments ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Modify the ACPI AC driver to install its own Notify() handler directly
instead of providing an ACPI driver .notify() callback.
This will allow the ACPI driver .notify() callback to be eliminated and
it will allow the AC driver to be switched over to a platform one in the
future.
Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com>
[ rjw: Subject and changelog edits, whitespace adjustments ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Most ACPI drivers set driver_data in their .add() callbacks, but usually
they don't clear it in the error code path.
Set driver_data to NULL in acpi_device_probe() to prevent stale pointers
from staying around.
Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Introduce new functions acpi_dev_install_notify_handler() and
acpi_dev_remove_notify_handler(), to install and remove, respectively,
a handler for AML Notify() operations targeted at a given ACPI device
object. They will allow drivers to install Notify() handlers directly
instead of providing an ACPI driver .notify() callback to be invoked
in the context of a Notify() handler installed by the ACPI bus type
code. In particular, this will help platform drivers to provide
Notify() handlers for the ACPI companions of the platform devices
they bind to.
These functions are replacements for acpi_device_install_notify_handler()
and acpi_device_remove_notify_handler(), respectively, and after all
drivers switch over to using them, the old ones will be dropped.
Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com>
[ rjw: Subject and changelog edits, whitespace adjustments ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The processor _OSC method is already used for a workaround introduced
in commit a21211672c ("ACPI / processor: Request native thermal
interrupt handling via _OSC"), but in accordance with ACPI 6.5 (and
earlier), it should be used for negotiating all of the processor
capabilities instead of _PDC (which has been deprecated since ACPI 3.0
and got removed from ACPI 6.5 entirely).
Create a new callback function called acpi_processor_osc() to be invoked
for every processor object and processor device in the ACPI namespace, in
analogy with the already existing acpi_hwp_native_thermal_lvt_osc().
Make this function implement the workaround mentioned above and convey
all of the OSPM processor support information to the platform firmware
by setting all of the appropriate processor capabilities bits before
evaluating _OSC for the given processor. For this purpose, make it
call arch_acpi_set_proc_cap_bits() and modify the latter to set
ACPI_PROC_CAP_COLLAB_PROC_PERF along with the other processor
capabilities bits.
Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
[ rjw: Subject and changelog edits, whitespace fixup ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Currently, ACPI_PROC_CAP_SMP_T_SWCOORD is set in acpi_set_pdc_bits(), but
it is not _PDC-specific. It should be set along with the other processor
capability bits.
Move the setting of ACPI_PROC_CAP_SMP_T_SWCOORD to
arch_acpi_set_proc_cap_bits().
Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Currently arch_acpi_set_proc_cap_bits() clears ACPI_PDC_C_C2C3_FFH bit in
case MWAIT instruction is not supported.
It should also clear ACPI_PDC_C_C1_FFH, as when MWAIT is not supported,
C1 is entered by executing the HLT instruction.
Quote from the C_C1_FFH description:
"If set, OSPM is capable of performing native C State instructions (beyond
halt) for the C1 handler in multi-processor configurations". As without
MWAIT there is no native C-state instructions beyond HALT, this bit
should be toggled off."
Clear ACPI_PDC_C_C1_FFH and ACPI_PDC_C_C2C3_FFH in
arch_acpi_set_proc_cap_bits() in case MWAIT is not supported or
overridden.
Remove setting those bits from the processor_pdc.c code.
Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The prefix in the names of the ACPI_PDC symbols suggests that they are
only relevant for _PDC, but in fact they can also be used in the _OSC.
Change that prefix to a more generic ACPI_PROC_CAP that will better
reflect the purpose of those symbols as they represent bits in a general
processor capabilities buffer.
Rename pdc_intel.h to proc_cap_intel.h to follow the change of the
symbol name prefix.
No intentional functional impact.
Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The capabilities buffer modified by the arch_acpi_set_pdc_bits() is not
_PDC-specific, as it can be used by _OSC too.
Change the name of that function to better reflect its independence from
_PDC and make it take the capabilities buffer address as the argument
directly, without any offset, as _OSC and _PDC use different capabilities
buffer offsets.
No intentional functional impact.
Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Since _PDC method is deprecated and a preferred method of communicating
OSPM processor power management capabilities is _OSC, there is a need to
move function checking whether processor is present as this logic is not
_PDC specific.
Move processor_physically_present() to acpi_processor.c.
No intentional functional impact.
Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Commit 2a2a64714d ("ACPI: Disable MWAIT via DMI on broken Compal board")
introduced a workaround for MWAIT for a specific x86 system.
Move the code outside of acpi_processor.c to acpi/x86/ directory for
consistency and rename the functions associated with it, so their names
start with "acpi_proc_quirk_" to make the goal obvious.
No intentional functional impact.
Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com>
[ rjw: Subject and changelog edits, two function names changed ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This is a step toward making __iommu_probe_device() self contained.
It should, under proper locking, check if the device is already associated
with an iommu driver and resolve parallel probes. All but one of the
callers open code this test using two different means, but they all
rely on dev->iommu_group.
Currently the bus_iommu_probe()/probe_iommu_group() and
probe_acpi_namespace_devices() rejects already probed devices with an
unlocked read of dev->iommu_group. The OF and ACPI "replay" functions use
device_iommu_mapped() which is the same read without the pointless
refcount.
Move this test into __iommu_probe_device() and put it under the
iommu_probe_device_lock. The store to dev->iommu_group is in
iommu_group_add_device() which is also called under this lock for iommu
driver devices, making it properly locked.
The only path that didn't have this check is the hotplug path triggered by
BUS_NOTIFY_ADD_DEVICE. The only way to get dev->iommu_group assigned
outside the probe path is via iommu_group_add_device(). Today the only
caller is VFIO no-iommu which never associates with an iommu driver. Thus
adding this additional check is safe.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/1-v3-328044aa278c+45e49-iommu_probe_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
ACPICA commit 90310989a0790032f5a0140741ff09b545af4bc5
According to the ACPI specification 19.6.134, no argument is required to be passed for ASL Timer instruction. For taking care of no argument, AML_NO_OPERAND_RESOLVE flag is added to ASL Timer instruction opcode.
When ASL timer instruction interpreted by ACPI interpreter, getting error. After adding AML_NO_OPERAND_RESOLVE flag to ASL Timer instruction opcode, issue is not observed.
=============================================================
UBSAN: array-index-out-of-bounds in acpica/dswexec.c:401:12 index -1 is out of range for type 'union acpi_operand_object *[9]'
CPU: 37 PID: 1678 Comm: cat Not tainted
6.0.0-dev-th500-6.0.y-1+bcf8c46459e407-generic-64k
HW name: NVIDIA BIOS v1.1.1-d7acbfc-dirty 12/19/2022 Call trace:
dump_backtrace+0xe0/0x130
show_stack+0x20/0x60
dump_stack_lvl+0x68/0x84
dump_stack+0x18/0x34
ubsan_epilogue+0x10/0x50
__ubsan_handle_out_of_bounds+0x80/0x90
acpi_ds_exec_end_op+0x1bc/0x6d8
acpi_ps_parse_loop+0x57c/0x618
acpi_ps_parse_aml+0x1e0/0x4b4
acpi_ps_execute_method+0x24c/0x2b8
acpi_ns_evaluate+0x3a8/0x4bc
acpi_evaluate_object+0x15c/0x37c
acpi_evaluate_integer+0x54/0x15c
show_power+0x8c/0x12c [acpi_power_meter]
Link: https://github.com/acpica/acpica/commit/90310989
Signed-off-by: Abhishek Mainkar <abmainkar@nvidia.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 3a9dbc5cb1573b87a16b50918977ab9e53e24408
'object' is known to be NULL at this point. There is little value to log
it twice in the error message.
Link: https://github.com/acpica/acpica/commit/3a9dbc5c
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit ef7cf185a046d76119b631f16e7c991543c80edc
This commit add the Interrupt command to acpiexec.
The Interrupt command simulates an interrupt with a int_ID (GSIV)
equal to the first argument of the call.
The acpiexec code simulates the behaviour by OSPM: execute the _EVT
method of the GED device associated with that int_ID.
Link: https://github.com/acpica/acpica/commit/ef7cf185
Signed-off-by: Jose Marinho <jose.marinho@arm.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit dc6fd1d12903015726a8a6f87f63e86141576a68
The GED device is described by a _HID of ACPI0013.
This code traverses the namespace identifying all GED devices.
For each GED device in the namespace we record 1) the Interrupt objects
and the _EVT method.
This information is used when an interrupt is simulate.
Link: https://github.com/acpica/acpica/commit/dc6fd1d1
Signed-off-by: Jose Marinho <jose.marinho@arm.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit a597e3b247df72aec0f6e056c95abe2d973ac10c
Link: https://github.com/acpica/acpica/commit/a597e3b2
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 2250f71fe77396db21df805222ffcbf19e1e7896
Make the code simpler and more readable.
Link: https://github.com/acpica/acpica/commit/2250f71f
Signed-off-by: Jiangshan Yi <yijiangshan@kylinos.cn>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 0a43d3521582b5234f69e8bb535e83325387525a
Avoid trailing semicolons in macro, and it's not readable to put macro ACPI_STATE_COMMON and other
variables in the same line.
So modify the macro and just put it in a single line.
Link: https://github.com/acpica/acpica/commit/0a43d352
Signed-off-by: George Guo <guodongtai@kylinos.cn>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit aea0a5cfce262ce2ab16fd96d87c12cf5e756380
We're storing a persistent pointer to an ephemeral local variable
which technically is a dangling pointer and the compiler is correct.
However, since we never indirect the pointer, this is a safe
operation and we can suppress the warning.
Also, some C run-times (like MUSL) aren't including <stdint.h>
indirectly so we must include it explicitly or we won't have the
type definition for uintptr_t.
Fixes issue #867.
Link: https://github.com/acpica/acpica/commit/aea0a5cf
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
- Make acpi_companion_match() return a const pointer and update its
callers accordingly (Andy Shevchenko).
- Move the extern declaration of the acpi_root variable to a header
file so as to address a compiler warning (Andy Shevchenko).
- Address compiler warnings in the ACPI device enumeration code by
adding a missing header file include to it (Ben Dooks).
- Refine the SMB0001 quirk in the ACPI device enumeration code so as to
address an i2c-scmi driver regression (Andy Shevchenko).
- Clean up two pieces of the ACPI device enumeration code (Andy
Shevchenko).
-----BEGIN PGP SIGNATURE-----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=QyfX
-----END PGP SIGNATURE-----
Merge tag 'acpi-6.5-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more ACPI updates from Rafael Wysocki:
"These fix a couple of compiler warnings, refine an ACPI device
enumeration quirk to address a driver regression and clean up code.
Specifics:
- Make acpi_companion_match() return a const pointer and update its
callers accordingly (Andy Shevchenko)
- Move the extern declaration of the acpi_root variable to a header
file so as to address a compiler warning (Andy Shevchenko)
- Address compiler warnings in the ACPI device enumeration code by
adding a missing header file include to it (Ben Dooks)
- Refine the SMB0001 quirk in the ACPI device enumeration code so as
to address an i2c-scmi driver regression (Andy Shevchenko)
- Clean up two pieces of the ACPI device enumeration code (Andy
Shevchenko)"
* tag 'acpi-6.5-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: scan: Use the acpi_match_acpi_device() helper
ACPI: platform: Move SMB0001 HID to the header and reuse
ACPI: platform: Ignore SMB0001 only when it has resources
ACPI: bus: Introduce acpi_match_acpi_device() helper
ACPI: scan: fix undeclared variable warnings by including sleep.h
ACPI: bus: Constify acpi_companion_match() returned value
ACPI: scan: Move acpi_root to internal header
Merge additional ACPI device enumeration code changes for 6.5-rc1.
- Make acpi_companion_match() return a const pointer and update its
callers accordingly (Andy Shevchenko).
- Move the extern declaration of the acpi_root variable to a header
file so as to address a compiler warning (Andy Shevchenko).
- Address compiler warnings in the ACPI device enumeration code by
adding a missing header file include to it (Ben Dooks).
- Refine the SMB0001 quirk in the ACPI device enumeration code so as to
address an i2c-scmi driver regression (Andy Shevchenko).
- Clean up two pieces of the ACPI device enumeration code (Andy
Shevchenko).
* acpi-bus:
ACPI: bus: Constify acpi_companion_match() returned value
* acpi-scan:
ACPI: scan: Use the acpi_match_acpi_device() helper
ACPI: platform: Move SMB0001 HID to the header and reuse
ACPI: platform: Ignore SMB0001 only when it has resources
ACPI: bus: Introduce acpi_match_acpi_device() helper
ACPI: scan: fix undeclared variable warnings by including sleep.h
ACPI: scan: Move acpi_root to internal header
Instead of doing two pass parsing of the table, replace
acpi_match_device_ids() with acpi_match_acpi_device().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
There are at least two places in the kernel that are using
the SMB0001 HID. Make it to be available via acpi_drivers.h
header file. While at it, replace hard coded one with a
definition.
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Acked-by: Wolfram Sang <wsa@kernel.org> # for I2C
Link: https://lore.kernel.org/r/20230621151652.79579-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
After switching i2c-scmi driver to be a platform one, it stopped
being enumerated on number of Kontron platforms, because it's
listed in the forbidden_id_list.
To resolve the situation, add a flag to driver data to allow devices
with no resources in _CRS to be enumerated via platform bus.
Fixes: 03d4287add ("i2c: scmi: Convert to be a platform driver")
Closes: https://lore.kernel.org/r/60c1756765b9a3f1eab0dcbd84f59f00fe1caf48.camel@kontron.com
Link: https://lore.kernel.org/r/20230621151652.79579-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
[ rjw: Move has_resource definition to the block in which it is used and
initialize it to 'false' ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Match the ACPI device against a given list of ACPI IDs.
Subsequent changes will make use of this.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
[ rjw: Changelog edit ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
There are two pieces of data being exported from drivers/acpi/scan.c
(acpi_device_lock and acpi_wakeup_device_list) that don't have their
definitions declared in anything scan.c is including.
Fix the following sparse warnings by including sleep.h to add the
declarations of acpi_device_lock and acpi_wakeup_device_list to
fix the followng sparse warnings:
drivers/acpi/scan.c:42:1: warning: symbol 'acpi_device_lock' was not declared. Should it be static?
drivers/acpi/scan.c:43:1: warning: symbol 'acpi_wakeup_device_list' was not declared. Should it be static?
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* Support for ACPI.
* Various cleanups to the ISA string parsing, including making them
case-insensitive
* Support for the vector extension.
* Support for independent irq/softirq stacks.
* Our CPU DT binding now has "unevaluatedProperties: false"
-----BEGIN PGP SIGNATURE-----
iQJHBAABCAAxFiEEKzw3R0RoQ7JKlDp6LhMZ81+7GIkFAmSe70ATHHBhbG1lckBk
YWJiZWx0LmNvbQAKCRAuExnzX7sYiWNPD/0ZfSdQ0A/gMVOzAD4zFKPEqQ6ffW2V
Zy6Jo7UDNqKsiai7QA4XB1uyYIv/y1yUKJ0oeBVcA9Nzyq+TW9QDcApDBTabxAUI
agY19YKw6VVZ+p7I9sMsf6EbdJdkNfSAzcQACPxb4ScEoaf9X+oAK5qgXuRuWluh
qQuVkkJlgWc/t1cuUkrRdJmHQYvjP3zL7z4o344q2IVpXJkNNu0GeP+HbF8BYKcA
+I/TTA5JY3kCIaxkpF2rU6pE6T5T9xrPmRYZ7bZoPUPnbL+M8As/jx3ym52Y4WGp
kf8pgkxixOjU64kVJOH66CA8GaOiaAH/ptjQb0ZmCaGrHhr7aOT9HrkX4rU1lS8T
stPphfM4gGPcCoPgRqSl+mEhBzjII8maOBLtbricAoQi6efRq8fzoOGaif/QpCbc
6n0LGS4nQPGVyD3rAPfHxxfrlGJR+SsgyDvjZoDhqauFglims14GnK+eBeO8zrui
Aj/uuAS63VIYprJWC1NOBJlU2WKZiOGhCANpZ6W6SH21PYn2WjsVILqaGh+WN8ZO
KOHxZNaN8fQag0Yg7oNAUb7l6S0DHYtJIksFnFW2Rf2+VT58RAMYRQbpbhr7Tqr+
jLgIR8PkFrBERHE49IqLGhAxGDnNzAUysMRw9pIk7WIre2Jt4wPqUdl+ee+5ErIX
jiYfSFZw9q28UA==
=Fpq8
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-6.5-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- Support for ACPI
- Various cleanups to the ISA string parsing, including making them
case-insensitive
- Support for the vector extension
- Support for independent irq/softirq stacks
- Our CPU DT binding now has "unevaluatedProperties: false"
* tag 'riscv-for-linus-6.5-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (78 commits)
riscv: hibernate: remove WARN_ON in save_processor_state
dt-bindings: riscv: cpus: switch to unevaluatedProperties: false
dt-bindings: riscv: cpus: add a ref the common cpu schema
riscv: stack: Add config of thread stack size
riscv: stack: Support HAVE_SOFTIRQ_ON_OWN_STACK
riscv: stack: Support HAVE_IRQ_EXIT_ON_IRQ_STACK
RISC-V: always report presence of extensions formerly part of the base ISA
dt-bindings: riscv: explicitly mention assumption of Zicntr & Zihpm support
RISC-V: remove decrement/increment dance in ISA string parser
RISC-V: rework comments in ISA string parser
RISC-V: validate riscv,isa at boot, not during ISA string parsing
RISC-V: split early & late of_node to hartid mapping
RISC-V: simplify register width check in ISA string parsing
perf: RISC-V: Limit the number of counters returned from SBI
riscv: replace deprecated scall with ecall
riscv: uprobes: Restore thread.bad_cause
riscv: mm: try VMA lock-based page fault handling first
riscv: mm: Pre-allocate PGD entries for vmalloc/modules area
RISC-V: hwprobe: Expose Zba, Zbb, and Zbs
RISC-V: Track ISA extensions per hart
...
1, Preliminary ClangBuiltLinux enablement;
2, Add support to clone a time namespace;
3, Add vector extensions support;
4, Add SMT (Simultaneous Multi-Threading) support;
5, Support dbar with different hints;
6, Introduce hardware page table walker;
7, Add jump-label implementation;
8, Add rethook and uprobes support;
9, Some bug fixes and other small changes.
-----BEGIN PGP SIGNATURE-----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=3gt3
-----END PGP SIGNATURE-----
Merge tag 'loongarch-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch updates from Huacai Chen:
- preliminary ClangBuiltLinux enablement
- add support to clone a time namespace
- add vector extensions support
- add SMT (Simultaneous Multi-Threading) support
- support dbar with different hints
- introduce hardware page table walker
- add jump-label implementation
- add rethook and uprobes support
- some bug fixes and other small changes
* tag 'loongarch-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: (28 commits)
LoongArch: Remove five DIE_* definitions in kdebug.h
LoongArch: Add uprobes support
LoongArch: Use larch_insn_gen_break() for kprobes
LoongArch: Add larch_insn_gen_break() to generate break insns
LoongArch: Check for AMO instructions in insns_not_supported()
LoongArch: Move three functions from kprobes.c to inst.c
LoongArch: Replace kretprobe with rethook
LoongArch: Add jump-label implementation
LoongArch: Select HAVE_DEBUG_KMEMLEAK to support kmemleak
LoongArch: Export some arch-specific pm interfaces
LoongArch: Introduce hardware page table walker
LoongArch: Support dbar with different hints
LoongArch: Add SMT (Simultaneous Multi-Threading) support
LoongArch: Add vector extensions support
LoongArch: Add support to clone a time namespace
Makefile: Add loongarch target flag for Clang compilation
LoongArch: Mark Clang LTO as working
LoongArch: Include KBUILD_CPPFLAGS in CHECKFLAGS invocation
LoongArch: vDSO: Use CLANG_FLAGS instead of filtering out '--target='
LoongArch: Tweak CFLAGS for Clang compatibility
...
Fix suspend-to-idle breakage on multiple systems introduced by one of
the recent commits that may cause the affected systems to overheat while
suspended.
-----BEGIN PGP SIGNATURE-----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=k0Sg
-----END PGP SIGNATURE-----
Merge tag 'acpi-6.5-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Fix suspend-to-idle breakage on multiple systems introduced by one of
the recent commits that may cause the affected systems to overheat
while suspended"
* tag 'acpi-6.5-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: EC: Fix acpi_ec_dispatch_gpe()
Loongson-3A6000 has SMT (Simultaneous Multi-Threading) support, each
physical core has two logical cores (threads). This patch add SMT probe
and scheduler support via ACPI PPTT.
If SCHED_SMT enabled, Loongson-3A6000 is treated as 4 cores, 8 threads;
If SCHED_SMT disabled, Loongson-3A6000 is treated as 8 cores, 8 threads.
Remove smp_num_siblings to support HMP (Heterogeneous Multi-Processing).
Signed-off-by: Liupu Wang <wangliupu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
acpi_companion_match() doesn't alter the contents of the passed
parameter, so we don't expect that returned value can be altered
either. So constify it.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Compiler is not happy about handling of acpi_root variable:
...drivers/acpi/bus.c:37:20: warning: symbol 'acpi_root' was not declared. Should it be static?
Move it's definition to the internal header.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Commit 896e97bf99 ("ACPI: EC: Clear GPE on interrupt handling only")
broke suspend-to-idle at least on Dell XPS13 9360 and 9380.
The problem is that acpi_ec_dispatch_gpe() must clear the EC GPE,
because the EC GPE handler never runs when the system is in the
suspend-to-idle state and if the EC GPE is not cleared by the suspend-
to-idle loop, it is never cleared at all which leads to a GPE storm.
This causes suspend-to-idle to burn energy instead of saving it which
is potentially dangerous (the affected machines heat up rather badly
when that happens).
Addess this by making acpi_ec_dispatch_gpe() clear the EC GPE as it did
before.
Fixes: 896e97bf99 ("ACPI: EC: Clear GPE on interrupt handling only")
Tested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
- Introduce power capping core support for Intel TPMI (Topology Aware
Register and PM Capsule Interface) and a TPMI interface driver for
Intel RAPL (Zhang Rui, Dan Carpenter).
- Fix CONFIG_IOSF_MBI dependency in the Intel RAPL power capping
driver (Zhang Rui).
- Fix invalid initialization for pl4_supported field in the Intel RAPL
power capping driver (Sumeet Pawnikar).
- Clean up the intel_idle driver, make it work with VM guests that
cannot use the MWAIT instruction and address the case in which the
host may enter a deep idle state when the guest is idle (Arjan van
de Ven).
- Prevent cpufreq drivers that provide the ->adjust_perf() callback
without a ->fast_switch() one which is used as a fallback from the
former in some cases (Wyes Karny).
- Fix some issues related to the AMD P-state cpufreq driver (Mario
Limonciello, Wyes Karny).
- Fix the energy_performance_preference attribute handling in the
intel_pstate driver in passive mode (Tero Kristo).
- Fix the handling of pm_suspend_target_state when CONFIG_PM is unset
(Kai-Heng Feng).
- Correct spelling mistake in a comment in the hibernation code (Wang
Honghui).
- Add arch_resume_nosmt() prototype to avoid a "missing prototypes"
build warning (Arnd Bergmann).
- Restrict pm_pr_dbg() to system-wide power transitions and use it in
a few additional places (Mario Limonciello).
- Drop verification of in-params from genpd_add_device() and ensure
that all of its callers will do it (Ulf Hansson).
- Prevent possible integer overflows from occurring in
genpd_parse_state() (Nikita Zhandarovich).
- Reorder fieldls in 'struct devfreq_dev_status' to reduce its size
somewhat (Christophe JAILLET).
- Ensure that the Exynos PPMU driver is already loaded before the
Exynos Bus driver starts probing so as to avoid a possible freeze
loading of the kernel modules (Marek Szyprowski).
- Fix variable deferencing before NULL check in the mtk-cci devfreq
driver (Sukrut Bellary).
-----BEGIN PGP SIGNATURE-----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=SZV7
-----END PGP SIGNATURE-----
Merge tag 'pm-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These add Intel TPMI (Topology Aware Register and PM Capsule
Interface) support to the power capping subsystem, extend the
intel_idle driver to work in VM guests where MWAIT is not available,
extend the system-wide power management diagnostics, fix bugs and
clean up code.
Specifics:
- Introduce power capping core support for Intel TPMI (Topology Aware
Register and PM Capsule Interface) and a TPMI interface driver for
Intel RAPL (Zhang Rui, Dan Carpenter)
- Fix CONFIG_IOSF_MBI dependency in the Intel RAPL power capping
driver (Zhang Rui)
- Fix invalid initialization for pl4_supported field in the Intel
RAPL power capping driver (Sumeet Pawnikar)
- Clean up the intel_idle driver, make it work with VM guests that
cannot use the MWAIT instruction and address the case in which the
host may enter a deep idle state when the guest is idle (Arjan van
de Ven)
- Prevent cpufreq drivers that provide the ->adjust_perf() callback
without a ->fast_switch() one which is used as a fallback from the
former in some cases (Wyes Karny)
- Fix some issues related to the AMD P-state cpufreq driver (Mario
Limonciello, Wyes Karny)
- Fix the energy_performance_preference attribute handling in the
intel_pstate driver in passive mode (Tero Kristo)
- Fix the handling of pm_suspend_target_state when CONFIG_PM is unset
(Kai-Heng Feng)
- Correct spelling mistake in a comment in the hibernation code (Wang
Honghui)
- Add arch_resume_nosmt() prototype to avoid a "missing prototypes"
build warning (Arnd Bergmann)
- Restrict pm_pr_dbg() to system-wide power transitions and use it in
a few additional places (Mario Limonciello)
- Drop verification of in-params from genpd_add_device() and ensure
that all of its callers will do it (Ulf Hansson)
- Prevent possible integer overflows from occurring in
genpd_parse_state() (Nikita Zhandarovich)
- Reorder fieldls in 'struct devfreq_dev_status' to reduce its size
somewhat (Christophe JAILLET)
- Ensure that the Exynos PPMU driver is already loaded before the
Exynos Bus driver starts probing so as to avoid a possible freeze
loading of the kernel modules (Marek Szyprowski)
- Fix variable deferencing before NULL check in the mtk-cci devfreq
driver (Sukrut Bellary)"
* tag 'pm-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (42 commits)
intel_idle: Add a "Long HLT" C1 state for the VM guest mode
cpufreq: intel_pstate: Fix energy_performance_preference for passive
cpufreq: amd-pstate: Add a kernel config option to set default mode
cpufreq: amd-pstate: Set a fallback policy based on preferred_profile
ACPI: CPPC: Add definition for undefined FADT preferred PM profile value
cpufreq: amd-pstate: Set default governor to schedutil
PM: domains: Move the verification of in-params from genpd_add_device()
cpufreq: amd-pstate: Make amd-pstate EPP driver name hyphenated
cpufreq: amd-pstate: Write CPPC enable bit per-socket
intel_idle: Add support for using intel_idle in a VM guest using just hlt
cpufreq: Fail driver register if it has adjust_perf without fast_switch
intel_idle: clean up the (new) state_update_enter_method function
intel_idle: refactor state->enter manipulation into its own function
platform/x86/amd: pmc: Use pm_pr_dbg() for suspend related messages
pinctrl: amd: Use pm_pr_dbg to show debugging messages
ACPI: x86: Add pm_debug_messages for LPS0 _DSM state tracking
include/linux/suspend.h: Only show pm_pr_dbg messages at suspend/resume
powercap: RAPL: Fix a NULL vs IS_ERR() bug
powercap: RAPL: Fix CONFIG_IOSF_MBI dependency
powercap: RAPL: fix invalid initialization for pl4_supported field
...
- Reduce ACPI device enumeration overhead related to devices with
dependencies (Rafael Wysocki).
- Fix the handling of Microsoft LPS0 _DSM for suspend-to-idle (Mario
Limonciello).
- Fix section mismatch warning in the ACPI suspend-to-idle code (Arnd
Bergmann).
- Drop several ACPI resource management quirks related to IRQ ovverides
on AMD "Zen" systems (Mario Limonciello).
- Modify the ACPI EC driver to make it only clear the EC GPE status
when handling the GPE (Jeremy Compostella).
- Add quirks to work around ACPI tables defects on Lenovo Yoga Book
yb1-x90f/l and Nextbook Ares 8A (Hans de Goede).
- Add ACPi backlight quirks for Dell Studio 1569, Lenovo ThinkPad X131e
(3371 AMD version) and Apple iMac11,3 and stop trying to use vendor
backlight control on relatively recent systems (Hans de Goede).
- Add pwm_lookup_table entry for second PWM on CHT/BSW devices in the
ACPI LPSS (Intel SoC) driver (Hans de Goede).
- Add nfit_intel_shutdown_status() declaration to a local header to
avoid a "missing prototypes" build warning (Arnd Bergmann).
- Clean up the ACPI thermal driver and drop some dead or otherwise
unneded code from it (Rafael Wysocki).
- Rework the handling of notifications in the ACPI button drivers so
as to allow the common notification handling code for devices to be
simplified (Rafael Wysocki).
- Make ghes_get_devices() return NULL to indicate that there are no
GHES devices so as to allow vendor-specific EDAC drivers to probe
then (Li Yang).
- Mark bert_disable() as __initdata and drop an unused function from
the APEI GHES code (Miaohe Lin).
- Make the ACPI PAD (Processor Aggregator Device) driver realize that
Zhaoxin CPUs support nonstop TSC (Tony W Wang-oc).
- Drop the certainly unnecessary and likely incorrect inclusion of
linux/arm-smccc.h from acpi_ffh.c (Sudeep Holla).
-----BEGIN PGP SIGNATURE-----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=46Do
-----END PGP SIGNATURE-----
Merge tag 'acpi-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"These rework the handling of notifications in ACPI button drivers (to
enable future simplifications and cleanups), clean up the ACPI thermal
driver, update the ACPI backlight driver, add quirks working around
AML bugs on some systems, fix some assorted issues and clean up code.
Specifics:
- Reduce ACPI device enumeration overhead related to devices with
dependencies (Rafael Wysocki)
- Fix the handling of Microsoft LPS0 _DSM for suspend-to-idle (Mario
Limonciello)
- Fix section mismatch warning in the ACPI suspend-to-idle code (Arnd
Bergmann)
- Drop several ACPI resource management quirks related to IRQ
ovverides on AMD "Zen" systems (Mario Limonciello)
- Modify the ACPI EC driver to make it only clear the EC GPE status
when handling the GPE (Jeremy Compostella)
- Add quirks to work around ACPI tables defects on Lenovo Yoga Book
yb1-x90f/l and Nextbook Ares 8A (Hans de Goede)
- Add ACPi backlight quirks for Dell Studio 1569, Lenovo ThinkPad
X131e (3371 AMD version) and Apple iMac11,3 and stop trying to use
vendor backlight control on relatively recent systems (Hans de
Goede)
- Add pwm_lookup_table entry for second PWM on CHT/BSW devices in the
ACPI LPSS (Intel SoC) driver (Hans de Goede)
- Add nfit_intel_shutdown_status() declaration to a local header to
avoid a "missing prototypes" build warning (Arnd Bergmann)
- Clean up the ACPI thermal driver and drop some dead or otherwise
unneded code from it (Rafael Wysocki)
- Rework the handling of notifications in the ACPI button drivers so
as to allow the common notification handling code for devices to be
simplified (Rafael Wysocki)
- Make ghes_get_devices() return NULL to indicate that there are no
GHES devices so as to allow vendor-specific EDAC drivers to probe
then (Li Yang)
- Mark bert_disable() as __initdata and drop an unused function from
the APEI GHES code (Miaohe Lin)
- Make the ACPI PAD (Processor Aggregator Device) driver realize that
Zhaoxin CPUs support nonstop TSC (Tony W Wang-oc)
- Drop the certainly unnecessary and likely incorrect inclusion of
linux/arm-smccc.h from acpi_ffh.c (Sudeep Holla)"
* tag 'acpi-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (30 commits)
ACPI: video: Add backlight=native DMI quirk for Dell Studio 1569
ACPI: thermal: Drop struct acpi_thermal_flags
ACPI: thermal: Drop struct acpi_thermal_state
ACPI: bus: Simplify installation and removal of notify callback
ACPI: tiny-power-button: Eliminate the driver notify callback
ACPI: button: Use different notify handlers for lid and buttons
ACPI: button: Eliminate the driver notify callback
ACPI: thermal: Eliminate struct acpi_thermal_state_flags
ACPI: thermal: Move acpi_thermal_driver definition
ACPI: thermal: Move symbol definitions to one place
ACPI: thermal: Drop redundant ACPI_TRIPS_REFRESH_DEVICES symbol
ACPI: thermal: Use BIT() macro for defining flags
APEI: GHES: correctly return NULL for ghes_get_devices()
ACPI: FFH: Drop the inclusion of linux/arm-smccc.h
ACPI: PAD: mark Zhaoxin CPUs NONSTOP TSC correctly
ACPI: APEI: mark bert_disable as __initdata
ACPI: EC: Clear GPE on interrupt handling only
ACPI: video: Stop trying to use vendor backlight control on laptops from after ~2012
ACPI: x86: s2idle: Adjust Microsoft LPS0 _DSM handling sequence
ACPI: resource: Remove "Zen" specific match and quirks
...
- Support for the Armv8.9 Permission Indirection Extensions. While this
feature doesn't add new functionality, it enables future support for
Guarded Control Stacks (GCS) and Permission Overlays.
- User-space support for the Armv8.8 memcpy/memset instructions.
- arm64 perf: support the HiSilicon SoC uncore PMU, Arm CMN sysfs
identifier, support for the NXP i.MX9 SoC DDRC PMU, fixes and
cleanups.
- Removal of superfluous ISBs on context switch (following retrospective
architecture tightening).
- Decode the ISS2 register during faults for additional information to
help with debugging.
- KPTI clean-up/simplification of the trampoline exit code.
- Addressing several -Wmissing-prototype warnings.
- Kselftest improvements for signal handling and ptrace.
- Fix TPIDR2_EL0 restoring on sigreturn
- Clean-up, robustness improvements of the module allocation code.
- More sysreg conversions to the automatic register/bitfields
generation.
- CPU capabilities handling cleanup.
- Arm documentation updates: ACPI, ptdump.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEE5RElWfyWxS+3PLO2a9axLQDIXvEFAmSZyXwACgkQa9axLQDI
XvEM3BAAkMzHGTDhNVNGLSO07PVmdzTiuoNFlfX7bktdIb+El76VhGXhHeEywTje
wAq9JIYBf/Src2HbgZLwuly8Fn2vCrhyp++bRJW82o9SiBnx91+0mH7zLf+XHiQ4
FHKZxvaE6PaDc9o8WXr+IeucPRb5W2HgH37mktxh7ShMLsxorwS94V1oL29A2mV9
t4XQY7/tdmrDKMKMuQnIr1DurNXBhJ1OKvDnSN/Zzm96JOU/QQ32N2wEE7Y0aHOh
bBzClksx2mguQqV515mySGFe5yy9NqaAfx2hTAciq+1rwbiCSjqQQmEswoUH8WLX
JNLylxADWT2qXThFe8W6uyFzEshSAoI1yKxlCGuOsQpu4sFJtR8oh8dDj5669g4Y
j0jR87r9rWm0iyYI5I+XDMxFVyuh2eFInvjtynRbj+mtS3f/SkO8fXG6Uya+I76C
UGLlBUKnLr/zHuIGN0LE/V4dYTqsi9EtHoc2Am2xCZsS9jqkxKJG8C93Zsm4GlJC
OcUtBSjW0rYJq+tLk0yhR6hbh59QbiRh05KnZsPpOKi8purlKSL9ZNPRi7TndLdm
HjHUY+vQwNIpPIb6pyK4aYZuTdGEQIsQykQ8CULiIGlHi7kc4g9029ouLc5bBAeU
mU8D62I2ztzPoYljYWNtO7K6g/Dq8c4lpsaMAJ+1Wp2iq2xBJjo=
=rNBK
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
"Notable features are user-space support for the memcpy/memset
instructions and the permission indirection extension.
- Support for the Armv8.9 Permission Indirection Extensions. While
this feature doesn't add new functionality, it enables future
support for Guarded Control Stacks (GCS) and Permission Overlays
- User-space support for the Armv8.8 memcpy/memset instructions
- arm64 perf: support the HiSilicon SoC uncore PMU, Arm CMN sysfs
identifier, support for the NXP i.MX9 SoC DDRC PMU, fixes and
cleanups
- Removal of superfluous ISBs on context switch (following
retrospective architecture tightening)
- Decode the ISS2 register during faults for additional information
to help with debugging
- KPTI clean-up/simplification of the trampoline exit code
- Addressing several -Wmissing-prototype warnings
- Kselftest improvements for signal handling and ptrace
- Fix TPIDR2_EL0 restoring on sigreturn
- Clean-up, robustness improvements of the module allocation code
- More sysreg conversions to the automatic register/bitfields
generation
- CPU capabilities handling cleanup
- Arm documentation updates: ACPI, ptdump"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (124 commits)
kselftest/arm64: Add a test case for TPIDR2 restore
arm64/signal: Restore TPIDR2 register rather than memory state
arm64: alternatives: make clean_dcache_range_nopatch() noinstr-safe
Documentation/arm64: Add ptdump documentation
arm64: hibernate: remove WARN_ON in save_processor_state
kselftest/arm64: Log signal code and address for unexpected signals
docs: perf: Fix warning from 'make htmldocs' in hisi-pmu.rst
arm64/fpsimd: Exit streaming mode when flushing tasks
docs: perf: Add new description for HiSilicon UC PMU
drivers/perf: hisi: Add support for HiSilicon UC PMU driver
drivers/perf: hisi: Add support for HiSilicon H60PA and PAv3 PMU driver
perf: arm_cspmu: Add missing MODULE_DEVICE_TABLE
perf/arm-cmn: Add sysfs identifier
perf/arm-cmn: Revamp model detection
perf/arm_dmc620: Add cpumask
arm64: mm: fix VA-range sanity check
arm64/mm: remove now-superfluous ISBs from TTBR writes
Documentation/arm64: Update ACPI tables from BBR
Documentation/arm64: Update references in arm-acpi
Documentation/arm64: Update ARM and arch reference
...
- Parallel CPU bringup
The reason why people are interested in parallel bringup is to shorten
the (kexec) reboot time of cloud servers to reduce the downtime of the
VM tenants.
The current fully serialized bringup does the following per AP:
1) Prepare callbacks (allocate, intialize, create threads)
2) Kick the AP alive (e.g. INIT/SIPI on x86)
3) Wait for the AP to report alive state
4) Let the AP continue through the atomic bringup
5) Let the AP run the threaded bringup to full online state
There are two significant delays:
#3 The time for an AP to report alive state in start_secondary() on
x86 has been measured in the range between 350us and 3.5ms
depending on vendor and CPU type, BIOS microcode size etc.
#4 The atomic bringup does the microcode update. This has been
measured to take up to ~8ms on the primary threads depending on
the microcode patch size to apply.
On a two socket SKL server with 56 cores (112 threads) the boot CPU
spends on current mainline about 800ms busy waiting for the APs to come
up and apply microcode. That's more than 80% of the actual onlining
procedure.
This can be reduced significantly by splitting the bringup mechanism
into two parts:
1) Run the prepare callbacks and kick the AP alive for each AP which
needs to be brought up.
The APs wake up, do their firmware initialization and run the low
level kernel startup code including microcode loading in parallel
up to the first synchronization point. (#1 and #2 above)
2) Run the rest of the bringup code strictly serialized per CPU
(#3 - #5 above) as it's done today.
Parallelizing that stage of the CPU bringup might be possible in
theory, but it's questionable whether required surgery would be
justified for a pretty small gain.
If the system is large enough the first AP is already waiting at the
first synchronization point when the boot CPU finished the wake-up of
the last AP. That reduces the AP bringup time on that SKL from ~800ms
to ~80ms, i.e. by a factor ~10x.
The actual gain varies wildly depending on the system, CPU, microcode
patch size and other factors. There are some opportunities to reduce
the overhead further, but that needs some deep surgery in the x86 CPU
bringup code.
For now this is only enabled on x86, but the core functionality
obviously works for all SMP capable architectures.
- Enhancements for SMP function call tracing so it is possible to locate
the scheduling and the actual execution points. That allows to measure
IPI delivery time precisely.
-----BEGIN PGP SIGNATURE-----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=Y8if
-----END PGP SIGNATURE-----
Merge tag 'smp-core-2023-06-26' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull SMP updates from Thomas Gleixner:
"A large update for SMP management:
- Parallel CPU bringup
The reason why people are interested in parallel bringup is to
shorten the (kexec) reboot time of cloud servers to reduce the
downtime of the VM tenants.
The current fully serialized bringup does the following per AP:
1) Prepare callbacks (allocate, intialize, create threads)
2) Kick the AP alive (e.g. INIT/SIPI on x86)
3) Wait for the AP to report alive state
4) Let the AP continue through the atomic bringup
5) Let the AP run the threaded bringup to full online state
There are two significant delays:
#3 The time for an AP to report alive state in start_secondary()
on x86 has been measured in the range between 350us and 3.5ms
depending on vendor and CPU type, BIOS microcode size etc.
#4 The atomic bringup does the microcode update. This has been
measured to take up to ~8ms on the primary threads depending
on the microcode patch size to apply.
On a two socket SKL server with 56 cores (112 threads) the boot CPU
spends on current mainline about 800ms busy waiting for the APs to
come up and apply microcode. That's more than 80% of the actual
onlining procedure.
This can be reduced significantly by splitting the bringup
mechanism into two parts:
1) Run the prepare callbacks and kick the AP alive for each AP
which needs to be brought up.
The APs wake up, do their firmware initialization and run the
low level kernel startup code including microcode loading in
parallel up to the first synchronization point. (#1 and #2
above)
2) Run the rest of the bringup code strictly serialized per CPU
(#3 - #5 above) as it's done today.
Parallelizing that stage of the CPU bringup might be possible
in theory, but it's questionable whether required surgery
would be justified for a pretty small gain.
If the system is large enough the first AP is already waiting at
the first synchronization point when the boot CPU finished the
wake-up of the last AP. That reduces the AP bringup time on that
SKL from ~800ms to ~80ms, i.e. by a factor ~10x.
The actual gain varies wildly depending on the system, CPU,
microcode patch size and other factors. There are some
opportunities to reduce the overhead further, but that needs some
deep surgery in the x86 CPU bringup code.
For now this is only enabled on x86, but the core functionality
obviously works for all SMP capable architectures.
- Enhancements for SMP function call tracing so it is possible to
locate the scheduling and the actual execution points. That allows
to measure IPI delivery time precisely"
* tag 'smp-core-2023-06-26' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tip/tip: (45 commits)
trace,smp: Add tracepoints for scheduling remotelly called functions
trace,smp: Add tracepoints around remotelly called functions
MAINTAINERS: Add CPU HOTPLUG entry
x86/smpboot: Fix the parallel bringup decision
x86/realmode: Make stack lock work in trampoline_compat()
x86/smp: Initialize cpu_primary_thread_mask late
cpu/hotplug: Fix off by one in cpuhp_bringup_mask()
x86/apic: Fix use of X{,2}APIC_ENABLE in asm with older binutils
x86/smpboot/64: Implement arch_cpuhp_init_parallel_bringup() and enable it
x86/smpboot: Support parallel startup of secondary CPUs
x86/smpboot: Implement a bit spinlock to protect the realmode stack
x86/apic: Save the APIC virtual base address
cpu/hotplug: Allow "parallel" bringup up to CPUHP_BP_KICK_AP_STATE
x86/apic: Provide cpu_primary_thread mask
x86/smpboot: Enable split CPU startup
cpu/hotplug: Provide a split up CPUHP_BRINGUP mechanism
cpu/hotplug: Reset task stack state in _cpu_up()
cpu/hotplug: Remove unused state functions
riscv: Switch to hotplug core state synchronization
parisc: Switch to hotplug core state synchronization
...
Merge updates related to system-wide power management and generic power
domains (genpd) updates for 6.5-rc1:
- Fix the handling of pm_suspend_target_state when CONFIG_PM is unset
(Kai-Heng Feng).
- Correct spelling mistake in a comment in the hibernation code (Wang
Honghui).
- Add arch_resume_nosmt() prototype to avoid a "missing prototypes"
build warning (Arnd Bergmann).
- Restrict pm_pr_dbg() to system-wide power transitions and use it in
a few additional places (Mario Limonciello).
- Drop verification of in-params from genpd_add_device() and ensure
that all of its callers will do it (Ulf Hansson).
- Prevent possible integer overflows from occurring in
genpd_parse_state() (Nikita Zhandarovich).
* pm-sleep:
platform/x86/amd: pmc: Use pm_pr_dbg() for suspend related messages
pinctrl: amd: Use pm_pr_dbg to show debugging messages
ACPI: x86: Add pm_debug_messages for LPS0 _DSM state tracking
include/linux/suspend.h: Only show pm_pr_dbg messages at suspend/resume
PM: suspend: add a arch_resume_nosmt() prototype
PM: hibernate: Correct spelling mistake in a comment
PM: suspend: Fix pm_suspend_target_state handling for !CONFIG_PM
* pm-domains:
PM: domains: Move the verification of in-params from genpd_add_device()
PM: domains: fix integer overflow issues in genpd_parse_state()
Merge ACPI APEI changes, an ACPI PAD driver update and an ACPI FFH
handling cleanup related to ARM64 for 6.5-rc1:
- Make ghes_get_devices() return NULL to indicate that there are no
GHES devices so as to allow vendor-specific EDAC drivers to probe
then (Li Yang).
- Mark bert_disable() as __initdata and drop an unused function from
the APEI GHES code (Miaohe Lin).
- Make the ACPI PAD (Processor Aggregator Device) driver realize that
Zhaoxin CPUs support nonstop TSC (Tony W Wang-oc).
- Drop the certainly unnecessary and likely incorrect inclusion of
linux/arm-smccc.h from acpi_ffh.c (Sudeep Holla).
* acpi-apei:
APEI: GHES: correctly return NULL for ghes_get_devices()
ACPI: APEI: mark bert_disable as __initdata
ACPI: APEI: GHES: Remove unused ghes_estatus_pool_size_request()
* acpi-pad:
ACPI: PAD: mark Zhaoxin CPUs NONSTOP TSC correctly
* acpi-misc:
ACPI: FFH: Drop the inclusion of linux/arm-smccc.h
Merge ACPI thermal driver cleanups and ACPI button drivers rework for
6.5-rc1:
- Clean up the ACPI thermal driver and drop some dead or otherwise
unneded code from it (Rafael Wysocki).
- Rework the handling of notifications in the ACPI button drivers so
as to allow the common notification handling code for devices to be
simplified (Rafael Wysocki).
* acpi-thermal:
ACPI: thermal: Drop struct acpi_thermal_flags
ACPI: thermal: Drop struct acpi_thermal_state
ACPI: thermal: Eliminate struct acpi_thermal_state_flags
ACPI: thermal: Move acpi_thermal_driver definition
ACPI: thermal: Move symbol definitions to one place
ACPI: thermal: Drop redundant ACPI_TRIPS_REFRESH_DEVICES symbol
ACPI: thermal: Use BIT() macro for defining flags
* acpi-button:
ACPI: bus: Simplify installation and removal of notify callback
ACPI: tiny-power-button: Eliminate the driver notify callback
ACPI: button: Use different notify handlers for lid and buttons
ACPI: button: Eliminate the driver notify callback
Merge x86-related ACPI changes, backlight-related ACPI changes, an Intel
SoC (LPSS) ACPI driver update and a missing prototype warning fix
related to ACPI NFIT for 6.5-rc1:
- Add quirks to work around ACPI tables defects on Lenovo Yoga Book
yb1-x90f/l and Nextbook Ares 8A (Hans de Goede).
- Add ACPi backlight quirks for Dell Studio 1569, Lenovo ThinkPad X131e
(3371 AMD version) and Apple iMac11,3 and stop trying to use vendor
backlight control on relatively recent systems (Hans de Goede).
- Add pwm_lookup_table entry for second PWM on CHT/BSW devices in the
ACPI LPSS (Intel SoC) driver (Hans de Goede).
- Add nfit_intel_shutdown_status() declaration to a local header to
avoid a "missing prototypes" build warning (Arnd Bergmann).
* acpi-x86:
ACPI: x86: Add ACPI_QUIRK_UART1_SKIP for Lenovo Yoga Book yb1-x90f/l
ACPI: button: Add lid disable DMI quirk for Nextbook Ares 8A
ACPI: x86: Add skip i2c clients quirk for Nextbook Ares 8A
* acpi-video:
ACPI: video: Add backlight=native DMI quirk for Dell Studio 1569
ACPI: video: Stop trying to use vendor backlight control on laptops from after ~2012
ACPI: video: Add backlight=native DMI quirk for Lenovo ThinkPad X131e (3371 AMD version)
ACPI: video: Add backlight=native DMI quirk for Apple iMac11,3
* acpi-soc:
ACPI: LPSS: Add pwm_lookup_table entry for second PWM on CHT/BSW devices
* acpi-tables:
ACPI: NFIT: Add declaration in a local header
Merge ACPI device enumeration changes, ACPI power management update,
ACPI resources management updates and an EC driver update for 6.5-rc1:
- Reduce ACPI device enumeration overhead related to devices with
dependencies (Rafael Wysocki).
- Fix the handling of Microsoft LPS0 _DSM for suspend-to-idle (Mario
Limonciello).
- Fix section mismatch warning in the ACPI suspend-to-idle code (Arnd
Bergmann).
- Drop several ACPI resource management quirks related to IRQ ovverides
on AMD "Zen" systems (Mario Limonciello).
- Modify the ACPI EC driver to make it only clear the EC GPE status
when handling the GPE (Jeremy Compostella).
* acpi-scan:
ACPI: scan: Reduce overhead related to devices with dependencies
* acpi-pm:
ACPI: x86: s2idle: Adjust Microsoft LPS0 _DSM handling sequence
ACPI: PM: s2idle: fix section mismatch warning
* acpi-resource:
ACPI: resource: Remove "Zen" specific match and quirks
* acpi-ec:
ACPI: EC: Clear GPE on interrupt handling only
* arm64/for-next/perf:
docs: perf: Fix warning from 'make htmldocs' in hisi-pmu.rst
docs: perf: Add new description for HiSilicon UC PMU
drivers/perf: hisi: Add support for HiSilicon UC PMU driver
drivers/perf: hisi: Add support for HiSilicon H60PA and PAv3 PMU driver
perf: arm_cspmu: Add missing MODULE_DEVICE_TABLE
perf/arm-cmn: Add sysfs identifier
perf/arm-cmn: Revamp model detection
perf/arm_dmc620: Add cpumask
dt-bindings: perf: fsl-imx-ddr: Add i.MX93 compatible
drivers/perf: imx_ddr: Add support for NXP i.MX9 SoC DDRC PMU driver
perf/arm_cspmu: Decouple APMT dependency
perf/arm_cspmu: Clean up ACPI dependency
ACPI/APMT: Don't register invalid resource
perf/arm_cspmu: Fix event attribute type
perf: arm_cspmu: Set irq affinitiy only if overflow interrupt is used
drivers/perf: hisi: Don't migrate perf to the CPU going to teardown
drivers/perf: apple_m1: Force 63bit counters for M2 CPUs
perf/arm-cmn: Fix DTC reset
perf: qcom_l2_pmu: Make l2_cache_pmu_probe_cluster() more robust
perf/arm-cci: Slightly optimize cci_pmu_sync_counters()
* for-next/kpti:
: Simplify KPTI trampoline exit code
arm64: entry: Simplify tramp_alias macro and tramp_exit routine
arm64: entry: Preserve/restore X29 even for compat tasks
* for-next/missing-proto-warn:
: Address -Wmissing-prototype warnings
arm64: add alt_cb_patch_nops prototype
arm64: move early_brk64 prototype to header
arm64: signal: include asm/exception.h
arm64: kaslr: add kaslr_early_init() declaration
arm64: flush: include linux/libnvdimm.h
arm64: module-plts: inline linux/moduleloader.h
arm64: hide unused is_valid_bugaddr()
arm64: efi: add efi_handle_corrupted_x18 prototype
arm64: cpuidle: fix #ifdef for acpi functions
arm64: kvm: add prototypes for functions called in asm
arm64: spectre: provide prototypes for internal functions
arm64: move cpu_suspend_set_dbg_restorer() prototype to header
arm64: avoid prototype warnings for syscalls
arm64: add scs_patch_vmlinux prototype
arm64: xor-neon: mark xor_arm64_neon_*() static
* for-next/iss2-decode:
: Add decode of ISS2 to data abort reports
arm64/esr: Add decode of ISS2 to data abort reporting
arm64/esr: Use GENMASK() for the ISS mask
* for-next/kselftest:
: Various arm64 kselftest improvements
kselftest/arm64: Log signal code and address for unexpected signals
kselftest/arm64: Add a smoke test for ptracing hardware break/watch points
* for-next/misc:
: Miscellaneous patches
arm64: alternatives: make clean_dcache_range_nopatch() noinstr-safe
arm64: hibernate: remove WARN_ON in save_processor_state
arm64/fpsimd: Exit streaming mode when flushing tasks
arm64: mm: fix VA-range sanity check
arm64/mm: remove now-superfluous ISBs from TTBR writes
arm64: consolidate rox page protection logic
arm64: set __exception_irq_entry with __irq_entry as a default
arm64: syscall: unmask DAIF for tracing status
arm64: lockdep: enable checks for held locks when returning to userspace
arm64/cpucaps: increase string width to properly format cpucaps.h
arm64/cpufeature: Use helper for ECV CNTPOFF cpufeature
* for-next/feat_mops:
: Support for ARMv8.8 memcpy instructions in userspace
kselftest/arm64: add MOPS to hwcap test
arm64: mops: allow disabling MOPS from the kernel command line
arm64: mops: detect and enable FEAT_MOPS
arm64: mops: handle single stepping after MOPS exception
arm64: mops: handle MOPS exceptions
KVM: arm64: hide MOPS from guests
arm64: mops: don't disable host MOPS instructions from EL2
arm64: mops: document boot requirements for MOPS
KVM: arm64: switch HCRX_EL2 between host and guest
arm64: cpufeature: detect FEAT_HCX
KVM: arm64: initialize HCRX_EL2
* for-next/module-alloc:
: Make the arm64 module allocation code more robust (clean-up, VA range expansion)
arm64: module: rework module VA range selection
arm64: module: mandate MODULE_PLTS
arm64: module: move module randomization to module.c
arm64: kaslr: split kaslr/module initialization
arm64: kasan: remove !KASAN_VMALLOC remnants
arm64: module: remove old !KASAN_VMALLOC logic
* for-next/sysreg: (21 commits)
: More sysreg conversions to automatic generation
arm64/sysreg: Convert TRBIDR_EL1 register to automatic generation
arm64/sysreg: Convert TRBTRG_EL1 register to automatic generation
arm64/sysreg: Convert TRBMAR_EL1 register to automatic generation
arm64/sysreg: Convert TRBSR_EL1 register to automatic generation
arm64/sysreg: Convert TRBBASER_EL1 register to automatic generation
arm64/sysreg: Convert TRBPTR_EL1 register to automatic generation
arm64/sysreg: Convert TRBLIMITR_EL1 register to automatic generation
arm64/sysreg: Rename TRBIDR_EL1 fields per auto-gen tools format
arm64/sysreg: Rename TRBTRG_EL1 fields per auto-gen tools format
arm64/sysreg: Rename TRBMAR_EL1 fields per auto-gen tools format
arm64/sysreg: Rename TRBSR_EL1 fields per auto-gen tools format
arm64/sysreg: Rename TRBBASER_EL1 fields per auto-gen tools format
arm64/sysreg: Rename TRBPTR_EL1 fields per auto-gen tools format
arm64/sysreg: Rename TRBLIMITR_EL1 fields per auto-gen tools format
arm64/sysreg: Convert OSECCR_EL1 to automatic generation
arm64/sysreg: Convert OSDTRTX_EL1 to automatic generation
arm64/sysreg: Convert OSDTRRX_EL1 to automatic generation
arm64/sysreg: Convert OSLAR_EL1 to automatic generation
arm64/sysreg: Standardise naming of bitfield constants in OSL[AS]R_EL1
arm64/sysreg: Convert MDSCR_EL1 to automatic register generation
...
* for-next/cpucap:
: arm64 cpucap clean-up
arm64: cpufeature: fold cpus_set_cap() into update_cpu_capabilities()
arm64: cpufeature: use cpucap naming
arm64: alternatives: use cpucap naming
arm64: standardise cpucap bitmap names
* for-next/acpi:
: Various arm64-related ACPI patches
ACPI: bus: Consolidate all arm specific initialisation into acpi_arm_init()
* for-next/kdump:
: Simplify the crashkernel reservation behaviour of crashkernel=X,high on arm64
arm64: add kdump.rst into index.rst
Documentation: add kdump.rst to present crashkernel reservation on arm64
arm64: kdump: simplify the reservation behaviour of crashkernel=,high
* for-next/acpi-doc:
: Update ACPI documentation for Arm systems
Documentation/arm64: Update ACPI tables from BBR
Documentation/arm64: Update references in arm-acpi
Documentation/arm64: Update ARM and arch reference
* for-next/doc:
: arm64 documentation updates
Documentation/arm64: Add ptdump documentation
* for-next/tpidr2-fix:
: Fix the TPIDR2_EL0 register restoring on sigreturn
kselftest/arm64: Add a test case for TPIDR2 restore
arm64/signal: Restore TPIDR2 register rather than memory state
The Dell Studio 1569 predates Windows 8, so it defaults to using
acpi_video# for backlight control, but this is non functional on
this model.
Add a DMI quirk to use the native intel_backlight interface which
does work properly.
Reported-by: raycekarneal <raycekarneal@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Drop struct acpi_thermal_flags which is not really used (only one
flag in it is ever set, but it is never read) and call
acpi_execute_simple_method() directly to evaluate _SCP instead of
using acpi_thermal_set_cooling_mode(), which has no callers after
that change, so drop it.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Drop struct acpi_thermal_state which is not really used.
No functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Because the only drivers that cared about button fixed events take care
of those events by themselves now, eliminate the code related to them
from acpi_device_install_notify_handler() and
acpi_device_remove_notify_handler().
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Rework the ACPI tiny-power-button driver to install a notify handler or
a fixed event handler for the device it binds to by itself and drop its
notify callback.
This will allow acpi_device_install_notify_handler() and
acpi_device_remove_notify_handler() to be simplified going forward.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Since the lid handling in acpi_button_notify() is special, introduce
acpi_lid_notify() specifically for handling lid notifications.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Rework the ACPI button driver to install notify handlers or fixed
event handlers for the devices it binds to by itself, reduce the
indentation level in its notify handler routine and drop its
notify callback.
This will allow acpi_device_install_notify_handler() and
acpi_device_remove_notify_handler() to be simplified going forward
and it will allow the driver to use different notify handlers for the
lid and for the power and sleep buttons.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Michal Wilczynski <michal.wilczynski@intel.com>
The addition of might_sleep() to down_timeout() caused the latter to
enable interrupts unconditionally in some cases, which in turn broke
the ACPI S3 wakeup path in acpi_suspend_enter(), where down_timeout()
is called by acpi_disable_all_gpes() via acpi_ut_acquire_mutex().
Namely, if CONFIG_DEBUG_ATOMIC_SLEEP is set, might_sleep() causes
might_resched() to be used and if CONFIG_PREEMPT_VOLUNTARY is set,
this triggers __cond_resched() which may call preempt_schedule_common(),
so __schedule() gets invoked and it ends up with enabled interrupts (in
the prev == next case).
Now, enabling interrupts early in the S3 wakeup path causes the kernel
to crash.
Address this by modifying acpi_suspend_enter() to disable GPEs without
attempting to acquire the sleeping lock which is not needed in that code
path anyway.
Fixes: 99409b935c ("locking/semaphore: Add might_sleep() to down_*() family")
Reported-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: 5.15+ <stable@vger.kernel.org> # 5.15+
Enabling debugging messages for the state requires turning on dynamic
debugging for the file. To make it more accessible, use
`pm_debug_messages` and clearer strings for what is happening.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Notice that the enabled flag is only needed for active trip points,
so drop struct acpi_thermal_state_flags, add a simple "bool valid" field
to the definitions of all trip point structures instead of flags and
add a "bool enabled" field to struct acpi_thermal_active.
Adjust the code using the modified structures accordingly.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Michal Wilczynski <michal.wilczynski@intel.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Move the definition of the acpi_thermal_driver structure closer to the
initialization code that registes the driver, so some function forward
declarations can be dropped.
Also move the module information to the end of the file where it is
usually located.
No functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Move all of the symbol definitions to the initial part of the code so
they all can be found in one place.
While at it, consolidate white space used in there.
No functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Michal Wilczynski <michal.wilczynski@intel.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Drop the ACPI_TRIPS_REFRESH_DEVICES symbol which is redundant, because
ACPI_TRIPS_DEVICES can be used directly instead of it without any
drawbacks and rename the ACPI_TRIPS_REFRESH_THRESHOLDS to
ACPI_TRIPS_THRESHOLDS to make the code a bit more consistent.
While at it, fix up some formatting white space used in the symbol
definitions.
No functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Michal Wilczynski <michal.wilczynski@intel.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Use the BIT() macro for defining flag symbols in the ACPI thermal driver
instead of using "raw" values for the flags.
No functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Michal Wilczynski <michal.wilczynski@intel.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Since 315bada690 ("EDAC: Check for GHES preference in the
chipset-specific EDAC drivers"), vendor specific EDAC driver will not
probe correctly when CONFIG_ACPI_APEI_GHES is enabled but no GHES device
is present. Make ghes_get_devices() return NULL when the GHES device
list is empty to fix the problem.
Fixes: 9057a3f7ac ("EDAC/ghes: Prepare to make ghes_edac a proper module")
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The inclusion of linux/arm-smccc.h in acpi_ffh is unnecessary and can
be even termed wrong. It is needed in the arm64 architecture callback
implementation and probably is the leftover from the missed cleanup of
the initial implementation.
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Zhaoxin CPUs support NONSTOP TSC feature, so do not mark these CPUs
TSC unstable when use the acpi_pad driver.
Signed-off-by: Tony W Wang-oc <TonyWWang-oc@zhaoxin.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
It's only used inside the __init section. Mark it __initdata.
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
On multiple devices I work on, we noticed that
/sys/firmware/acpi/interrupts/sci_not is non-zero and keeps increasing
over time.
It turns out that there is a race condition between servicing a GPE
interrupt and handling task driven transactions.
If a GPE interrupt is received at the same time ec_poll() is running,
the advance_transaction() clears the GPE flag and the interrupt is not
serviced as acpi_ev_detect_gpe() relies on the GPE flag to call the
handler. As a result, `sci_not' is increased.
To address this, move the GPE status check and clearing from
advance_transaction() directly into acpi_ec_handle_interrupt(), so the
EC GPE only gets cleared in the interrupt handling path.
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
There have been 2 separate reports now about a non working
"dell_backlight" device getting registered under /sys/class/backlight
1 report for a Raptor Lake based Dell and 1 report for a Meteor Lake
(development) platform.
On hw from the last 10 years dell-laptop will not register "dell_backlight"
because acpi_video_get_backlight_type() will return acpi_backlight_video
there if called before the GPU/kms driver loads. So it does not matter if
the GPU driver's native backlight is registered after dell-laptop loads.
But it seems that on the latest generation laptops the ACPI tables
no longer contain acpi_video backlight control support which causes
acpi_video_get_backlight_type() to return acpi_backlight_vendor causing
"dell_backlight" to get registered if the dell-laptop module is loaded
before the GPU/kms driver.
Vendor specific backlight control like the "dell_backlight" device is
only necessary on quite old hw (from before acpi_video backlight control
was introduced). Work around "dell_backlight" registering on very new
hw (where acpi_video backlight control seems to be no more) by making
acpi_video_get_backlight_type() return acpi_backlight_none instead
of acpi_backlight_vendor as final fallback when the ACPI tables have
support for Windows 8 or later (laptops from after ~2012).
Suggested-by: Matthew Garrett <mjg59@srcf.ucam.org>
Reported-by: AceLan Kao <acelan.kao@canonical.com>
Closes: https://lore.kernel.org/platform-driver-x86/20230607034331.576623-1-acelan.kao@canonical.com/
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Don't register a resource for the second page unless the dual-page
extension flag is actually present to say it's valid.
CC: Lorenzo Pieralisi <lpieralisi@kernel.org>
CC: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
Reviewed-and-tested-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Link: https://lore.kernel.org/r/63b34656e1f7b41bcb458fb6d7496e04db757e0d.1685983270.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Move all of the ARM-specific initialization into one function namely
acpi_arm_init(), so it is not necessary to modify/update bus.c every
time a new piece of it is added.
Cc: Lorenzo Pieralisi <lpieralisi@kernel.org>
Cc: Rafael J. Wysocki <rafael@kernel.org>
Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
Link: https://lore.kernel.org/r/CAJZ5v0iBZRZmV_oU+VurqxnVMbFN_ttqrL=cLh0sUH+=u0PYsw@mail.gmail.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Reviewed-by: Shaoqin Huang <shahuang@redhat.com>
Link: https://lore.kernel.org/r/20230606093531.2746732-1-sudeep.holla@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
In Windows the Microsoft _DSM doesn't call functions 3->5->7 for suspend
and 8->6->4 for resume like Linux currently does.
Rather it calls 3->7->5 for suspend and 6->8->4 for resume.
Align this calling order for Linux as well.
Link: https://learn.microsoft.com/en-us/windows-hardware/design/device-experiences/modern-standby-states
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
commit 9946e39fe8 ("ACPI: resource: skip IRQ override on
AMD Zen platforms") attempted to overhaul the override logic so it
didn't apply on X86 AMD Zen systems. This was intentional so that
systems would prefer DSDT values instead of default MADT value for
IRQ 1 on Ryzen 6000 systems which typically uses ActiveLow for IRQ1.
This turned out to be a bad assumption because several vendors
add Interrupt Source Override but don't fix the DSDT. A pile of
quirks was collecting that proved this wasn't sustaintable.
Furthermore some vendors have used ActiveHigh for IRQ1.
To solve this problem revert the following commits:
* commit 17bb7046e7 ("ACPI: resource: Do IRQ override on all TongFang
GMxRGxx")
* commit f3cb9b7408 ("ACPI: resource: do IRQ override on Lenovo 14ALC7")
* commit bfcdf58380 ("ACPI: resource: do IRQ override on LENOVO IdeaPad")
* commit 7592b79ba4 ("ACPI: resource: do IRQ override on XMG Core 15")
* commit 9946e39fe8 ("ACPI: resource: skip IRQ override on AMD Zen
platforms")
Reported-by: evilsnoo@proton.me
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217394
Reported-by: ruinairas1992@gmail.com
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217406
Reported-by: nmschulte@gmail.com
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217336
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Tested-by: Werner Sembach <wse@tuxedocomputers.com>
Tested-by: Chuanhong Guo <gch981213@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The acpi_sleep_suspend_setup() function is missing an __init annotation,
which causes a warning in rare configurations that end up not inlining
it into its caller:
WARNING: modpost: vmlinux.o: section mismatch in reference: acpi_sleep_suspend_setup (section: .text) -> acpi_s2idle_setup (section: .init.text)
It's only called from an __init function, so adding the annotation is
correct here.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ghes_estatus_pool_size_request() is unused now, so remove it.
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The nfit_intel_shutdown_status() function has a __weak defintion
in nfit.c and an override in acpi_nfit_test.c for testing
purposes. This works without an extern declaration, but causes
a W=1 build warning:
drivers/acpi/nfit/core.c:1717:13: error: no previous prototype for 'nfit_intel_shutdown_status' [-Werror=missing-prototypes]
Add a declaration in a header that gets included from both
sides to shut up the warning and ensure that the prototypes
actually match.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Notice that all of the objects for which the acpi_scan_check_dep()
return value is greater than 0 are present in acpi_dep_list as consumers
(there may be multiple entries for one object, but that is not a
problem), so after carrying out the initial ACPI namespace walk in which
devices with dependencies are skipped, acpi_bus_scan() can simply walk
acpi_dep_list and enumerate all of the unique consumer objects from
there and their descendants instead of walking the entire target branch
of the ACPI namespace and looking for device objects that have not been
enumerated yet in it.
Because walking acpi_dep_list is generally less overhead than walking
the entire ACPI namespace, use the observation above to reduce the
system initialization overhead related to ACPI, which is particularly
important on large systems.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
- fix harmless warning in zboot code on 'make clean'
- add some missing prototypes
- fix boot regressions triggered by PE/COFF header image minor version
bump
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQQm/3uucuRGn1Dmh0wbglWLn0tXAUCZHjJNQAKCRAwbglWLn0t
XKrjAP9ZFwTZWvYKGWFYi119egU+HjpZmY8ccIG35sVt4TKRbgEAnTiMVWEggkuR
ETAd8mpk4pFjfa8yIY06Tdy3kjqIzgM=
=egis
-----END PGP SIGNATURE-----
Merge tag 'efi-fixes-for-v6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI fixes from Ard Biesheuvel:
"A few minor fixes for EFI, one of which fixes the reported boot
regression when booting x86 kernels using the BIOS based loader built
into the hypervisor framework on macOS.
- fix harmless warning in zboot code on 'make clean'
- add some missing prototypes
- fix boot regressions triggered by PE/COFF header image minor
version bump"
* tag 'efi-fixes-for-v6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi: Bump stub image version for macOS HVF compatibility
efi: fix missing prototype warnings
efi/libstub: zboot: Avoid eager evaluation of objcopy flags
RHCT is a new table defined for RISC-V to communicate the
features of the CPU to the OS. Create a new architecture folder
in drivers/acpi and add RHCT parsing code.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/20230515054928.2079268-11-sunilvl@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
processor_core needs arch-specific functions to map the ACPI ID
to the physical ID. In RISC-V platforms, hartid is the physical id
and RINTC structure in MADT provides this mapping. Add arch-specific
function to get this mapping from RINTC.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20230515054928.2079268-8-sunilvl@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Without this, if the tables are larger than 4K,
acpi_map() will fail.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20230515054928.2079268-6-sunilvl@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
When MADT is parsed, print RINTC information as below:
ACPI: RISC-V INTC (acpi_uid[0x0000] hart_id[0x0] enabled)
ACPI: RISC-V INTC (acpi_uid[0x0001] hart_id[0x1] enabled)
...
ACPI: RISC-V INTC (acpi_uid[0x000f] hart_id[0xf] enabled)
This debug information will be very helpful during bring up.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20230515054928.2079268-5-sunilvl@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The cper.c file needs to include an extra header, and efi_zboot_entry
needs an extern declaration to avoid these 'make W=1' warnings:
drivers/firmware/efi/libstub/zboot.c:65:1: error: no previous prototype for 'efi_zboot_entry' [-Werror=missing-prototypes]
drivers/firmware/efi/efi.c:176:16: error: no previous prototype for 'efi_attr_is_visible' [-Werror=missing-prototypes]
drivers/firmware/efi/cper.c:626:6: error: no previous prototype for 'cper_estatus_print' [-Werror=missing-prototypes]
drivers/firmware/efi/cper.c:649:5: error: no previous prototype for 'cper_estatus_check_header' [-Werror=missing-prototypes]
drivers/firmware/efi/cper.c:662:5: error: no previous prototype for 'cper_estatus_check' [-Werror=missing-prototypes]
To make this easier, move the cper specific declarations to
include/linux/cper.h.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
BSW PWM2 is used for backlight control for fixed (etched into the glass)
touch controls on some models.
Add an entry for the second PWM controller to bsw_pwm_lookup,
so that drivers can use pwm_get() to get a reference to it.
These touch-controls have specialized drivers which bind to different
devices on different models, so the consumer-device-name in the lookup
table entry is set to NULL, so that only con-id matching is used.
The con-id is set to "pwm_soc_lpss_2" which describes the PWM controller
rather than the usual approach of describing its function.
The specialized (model specific) drivers which need access to the PWM
controller know they need the "pwm_soc_lpss_2" con-id.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Linux defaults to picking the non-working ACPI video backlight interface
on the Lenovo ThinkPad X131e (3371 AMD version).
Add a DMI quirk to pick the working native radeon_bl0 interface instead.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Linux defaults to picking the non-working ACPI video backlight interface
on the Apple iMac11,3 .
Add a DMI quirk to pick the working native radeon_bl0 interface instead.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The Lenovo Yoga Book yb1-x90f/l 2-in-1 which ships with Android as
Factory OS has (another) bug in its DSDT where the UART resource for
the BTH0 ACPI device contains "\\_SB.PCIO.URT1" as path to the UART.
Note that is with a letter 'O' instead of the number '0' which is wrong.
This causes Linux to instantiate a standard /dev/ttyS? device for
the UART instead of a /sys/bus/serial device, which in turn causes
bluetooth to not work.
Similar DSDT bugs have been encountered before and to work around those
the acpi_quirk_skip_serdev_enumeration() helper exists.
Previous devices had the broken resource pointing to the first UART, while
the BT HCI was on the second UART, which ACPI_QUIRK_UART1_TTY_UART2_SKIP
deals with. Add a new ACPI_QUIRK_UART1_SKIP quirk for skipping enumeration
of UART1 instead for the Yoga Book case and add this quirk to the
existing DMI quirk table entry for the yb1-x90f/l .
This leaves the UART1 controller unbound allowing the x86-android-tablets
module to manually instantiate a serdev for it fixing bluetooth.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The LID0 device on the Nextbook Ares 8A tablet always reports lid
closed causing userspace to suspend the device as soon as booting
is complete.
Add a DMI quirk to disable the broken lid functionality.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The Nextbook Ares 8A is a x86 ACPI tablet which ships with Android x86
as factory OS. Its DSDT contains a bunch of I2C devices which are not
actually there (the Android x86 kernel fork ignores I2C devices described
in the DSDT).
On this specific model this just not cause resource conflicts, one of
the probe() calls for the non existing i2c_clients actually ends up
toggling a GPIO or executing a _PS3 after a failed probe which turns
the tablet off.
Add a ACPI_QUIRK_SKIP_I2C_CLIENTS for the Nextbook Ares 8 to the
acpi_quirk_skip_dmi_ids table to avoid the bogus i2c_clients and
to fix the tablet turning off during boot because of this.
Also add the "10EC5651" HID for the RealTek ALC5651 codec used
in this tablet to the list of HIDs for which not to skipi2c_client
instantiation, since the Intel SST sound driver relies on
the codec being instantiated through ACPI.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This was introduced with commit e1c467e690 ("x86, hotplug: Wake up CPU0
via NMI instead of INIT, SIPI, SIPI") to eventually support physical
hotplug of CPU0:
"We'll change this code in the future to wake up hard offlined CPU0 if
real platform and request are available."
11 years later this has not happened and physical hotplug is not officially
supported. Remove the cruft.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Michael Kelley <mikelley@microsoft.com>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Tested-by: Helge Deller <deller@gmx.de> # parisc
Tested-by: Guilherme G. Piccoli <gpiccoli@igalia.com> # Steam Deck
Link: https://lore.kernel.org/r/20230512205255.768845190@linutronix.de
Remove the acpi_backlight=video quirk for Lenovo ThinkPad W530.
This was intended to help users of the (unsupported) Nvidia binary driver,
but this has been reported to cause backlight control issues for users
who have the gfx configured in hybrid (dual-GPU) mode, so drop this.
The Nvidia binary driver should call acpi_video_register_backlight()
when necessary and this has been reported to Nvidia.
Until this is fixed Nvidia binary driver users can work around this by
passing "acpi_backlight=video" on the kernel commandline (with the latest
6.1.y or newer stable series, kernels < 6.1.y don't need this).
Fixes: a5b2781dca ("ACPI: video: Add acpi_backlight=video quirk for Lenovo ThinkPad W530")
Reported-by: Русев Путин <rockeraliexpress@gmail.com>
Link: https://lore.kernel.org/linux-acpi/CAK4BXn0ngZRmzx1bodAF8nmYj0PWdUXzPGHofRrsyZj8MBpcVA@mail.gmail.com/
Cc: 6.1+ <stable@vger.kernel.org> # 6.1+
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
- Do not turn off unused power resources during initialization on the
Toshiba Click Mini (Hans de Goede).
- Support strings in device properties supplied by ACPI _DSM on Apple
platforms (Hector Martin).
- Add an ACPI device ID quirk for Lenovo Yoga Tablet 2 (Marius Hoch).
-----BEGIN PGP SIGNATURE-----
iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAmRSbFMSHHJqd0Byand5
c29ja2kubmV0AAoJEILEb/54YlRxPJ0QALaL7YQJQTw0MMzx0l4V/tFUjaMBxwK8
WB4syZuZZfiDqEfUDq9PYW2MW1llpmko+T13xenYPU3DqsLEeHbeuuZBTJvzPlDl
8/RXu7osHTmY+CCaq970P3lEAt5O6EvMOblBkVJQMtmV8sINwuhzAq0DNu5EOBEI
u/nccgpnZciXcYEmaAQqgc7qekH7VTa/eWAddc1jr/h2JudztHmWuJl4ptlhO0es
imZVmGjtuWLVvQaHV2rNAGFy9HVDz5ZbmlujhWPqeAQs2gOs3zXBYrjQFsEbhgUx
5ONSSzVRKylwRnSC6TGXszXgX/lal04i/NutuAY1Or46rCjNTsPonjFhWWzyFzkS
Afk/VMobZFbtTlGejx1GJtw5EN1HfbUylOdrdDA8Lzmihkp51YspcgtDqWNQDrF/
VOAPwaaV24J/ZFTjftmBnke0vWQTGJ+RUvFlQUH0rQfvgnqyYW3Mxwy04JwpnUOm
hfWoXO0gnl+IHvnEzRaszcd65SJ43nvaHYBOWjG9SvlpQyXAlfnFKtteqbTmo4Qi
MuYEXPu5AQRi930Uga/G0TfNV0iHnLBnuCO/bh4A/96b9ODY25/RrhcHndBk4kFd
6C+pYNNGsMvicgoi/Iuh25z6WbinC2TtmvrlrJFqeGuGiPGw/5KEmtGNVRySxagd
zZXJlfZRotxi
=XhG2
-----END PGP SIGNATURE-----
Merge tag 'acpi-6.4-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more ACPI updates from Rafael Wysocki:
"These add two ACPI-related quirks and extend support for Apple device
properties supplied via ACPI _DSM.
Specifics:
- Do not turn off unused power resources during initialization on the
Toshiba Click Mini (Hans de Goede)
- Support strings in device properties supplied by ACPI _DSM on Apple
platforms (Hector Martin)
- Add an ACPI device ID quirk for Lenovo Yoga Tablet 2 (Marius Hoch)"
* tag 'acpi-6.4-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: property: Support strings in Apple _DSM props
ACPI: x86: utils: Remove Lenovo Yoga Tablet 2's MAGN0001
ACPI: PM: Do not turn of unused power resources on the Toshiba Click Mini
- Add compatible DT bindings for imx6sll and imx6ul to fix a dtbs check
warning (Stefan Wahren).
- Update the example in the DT bindings to reflect changes with the
ADC node name for QCom TM and TM5 (Marijn Suijten).
- Fix comments for the cpuidle_cooling_register() function to match the
function prototype (Chenggang Wang).
- Fix inconsistent temperature read and some Mediatek variant board
reboot by reverting a change and handling the temperature
differently (AngeloGioacchino Del Regno).
- Fix a memory leak in the initialization error path for the Mediatek
driver (Kang Chen).
- Use of_address_to_resource() in the Mediatek driver (Rob Herring).
- Fix unit address in the QCom tsens driver DT bindings (Krzysztof
Kozlowski).
- Clean up the step-wise thermal governor (Zhang Rui).
- Introduce thermal_zone_device() for accessing the device field of
struct thermal_zone_device and two drivers use it (Daniel Lezcano).
- Clean up the ACPI thermal driver a bit (Daniel Lezcano).
- Delete the thermal driver for Intel Menlow platforms that is not
expected to have any users (Rafael Wysocki).
-----BEGIN PGP SIGNATURE-----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=/bW2
-----END PGP SIGNATURE-----
Merge tag 'thermal-6.4-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more thermal control updates from Rafael Wysocki:
"These are mostly cleanups on top of the previously merged thermal
control changes plus some driver fixes and the removal of the Intel
Menlow thermal driver.
Specifics:
- Add compatible DT bindings for imx6sll and imx6ul to fix a dtbs
check warning (Stefan Wahren)
- Update the example in the DT bindings to reflect changes with the
ADC node name for QCom TM and TM5 (Marijn Suijten)
- Fix comments for the cpuidle_cooling_register() function to match
the function prototype (Chenggang Wang)
- Fix inconsistent temperature read and some Mediatek variant board
reboot by reverting a change and handling the temperature
differently (AngeloGioacchino Del Regno)
- Fix a memory leak in the initialization error path for the Mediatek
driver (Kang Chen)
- Use of_address_to_resource() in the Mediatek driver (Rob Herring)
- Fix unit address in the QCom tsens driver DT bindings (Krzysztof
Kozlowski)
- Clean up the step-wise thermal governor (Zhang Rui)
- Introduce thermal_zone_device() for accessing the device field of
struct thermal_zone_device and two drivers use it (Daniel Lezcano)
- Clean up the ACPI thermal driver a bit (Daniel Lezcano)
- Delete the thermal driver for Intel Menlow platforms that is not
expected to have any users (Rafael Wysocki)"
* tag 'thermal-6.4-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: intel: menlow: Get rid of this driver
ACPI: thermal: Move to dedicated function sysfs extra attr creation
ACPI: thermal: Use thermal_zone_device()
thermal: intel: pch_thermal: Use thermal driver device to write a trace
thermal: core: Encapsulate tz->device field
thermal: gov_step_wise: Adjust code logic to match comment
thermal: gov_step_wise: Delete obsolete comment
dt-bindings: thermal: qcom-tsens: Correct unit address
thermal/drivers/mediatek: Use of_address_to_resource()
thermal/drivers/mediatek: Change clk_prepare_enable to devm_clk_get_enabled in mtk_thermal_probe
thermal/drivers/mediatek: Use devm_of_iomap to avoid resource leak in mtk_thermal_probe
thermal/drivers/mediatek: Add temperature constraints to validate read
Revert "thermal/drivers/mediatek: Add delay after thermal banks initialization"
thermal/drivers/cpuidle_cooling: Delete unmatched comments
dt-bindings: thermal: Use generic ADC node name in examples
dt-bindings: imx-thermal: Add imx6sll and imx6ul compatible
Merge an ACPI power management quirk and a change related to the
handling of ACPI device properties for 6.4-rc1:
- Do not turn off unused power resources during initialization on the
Toshiba Click Mini (Hans de Goede).
- Support strings in device properties supplied by ACPI _DSM on Apple
platforms (Hector Martin).
* acpi-pm:
ACPI: PM: Do not turn of unused power resources on the Toshiba Click Mini
* acpi-properties:
ACPI: property: Support strings in Apple _DSM props
Here is the "big" set of char/misc and other driver subsystems for
6.4-rc1.
It's pretty big, but due to the removal of pcmcia drivers, almost breaks
even for number of lines added vs. removed, a nice change.
Included in here are:
- removal of unused PCMCIA drivers (finally!)
- Interconnect driver updates and additions
- Lots of IIO driver updates and additions
- MHI driver updates
- Coresight driver updates
- NVMEM driver updates, which required some OF updates
- W1 driver updates and a new maintainer to manage the subsystem
- FPGA driver updates
- New driver subsystem, CDX, for AMD systems
- lots of other small driver updates and additions
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZEp5Eg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynSXgCg0kSw3vUYwpsnhAsQkoPw1QVA23sAn2edRCMa
GEkPWjrROueCom7xbLMu
=eR+P
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc drivers updates from Greg KH:
"Here is the "big" set of char/misc and other driver subsystems for
6.4-rc1.
It's pretty big, but due to the removal of pcmcia drivers, almost
breaks even for number of lines added vs. removed, a nice change.
Included in here are:
- removal of unused PCMCIA drivers (finally!)
- Interconnect driver updates and additions
- Lots of IIO driver updates and additions
- MHI driver updates
- Coresight driver updates
- NVMEM driver updates, which required some OF updates
- W1 driver updates and a new maintainer to manage the subsystem
- FPGA driver updates
- New driver subsystem, CDX, for AMD systems
- lots of other small driver updates and additions
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (196 commits)
mcb-lpc: Reallocate memory region to avoid memory overlapping
mcb-pci: Reallocate memory region to avoid memory overlapping
mcb: Return actual parsed size when reading chameleon table
kernel/configs: Drop Android config fragments
virt: acrn: Replace obsolete memalign() with posix_memalign()
spmi: Add a check for remove callback when removing a SPMI driver
spmi: fix W=1 kernel-doc warnings
spmi: mtk-pmif: Drop of_match_ptr for ID table
spmi: pmic-arb: Convert to platform remove callback returning void
spmi: mtk-pmif: Convert to platform remove callback returning void
spmi: hisi-spmi-controller: Convert to platform remove callback returning void
w1: gpio: remove unnecessary ENOMEM messages
w1: omap-hdq: remove unnecessary ENOMEM messages
w1: omap-hdq: add SPDX tag
w1: omap-hdq: allow compile testing
w1: matrox: remove unnecessary ENOMEM messages
w1: matrox: use inline over __inline__
w1: matrox: switch from asm to linux header
w1: ds2482: do not use assignment in if condition
w1: ds2482: drop unnecessary header
...
Here is the large set of driver core changes for 6.4-rc1.
Once again, a busy development cycle, with lots of changes happening in
the driver core in the quest to be able to move "struct bus" and "struct
class" into read-only memory, a task now complete with these changes.
This will make the future rust interactions with the driver core more
"provably correct" as well as providing more obvious lifetime rules for
all busses and classes in the kernel.
The changes required for this did touch many individual classes and
busses as many callbacks were changed to take const * parameters
instead. All of these changes have been submitted to the various
subsystem maintainers, giving them plenty of time to review, and most of
them actually did so.
Other than those changes, included in here are a small set of other
things:
- kobject logging improvements
- cacheinfo improvements and updates
- obligatory fw_devlink updates and fixes
- documentation updates
- device property cleanups and const * changes
- firwmare loader dependency fixes.
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZEp7Sw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykitQCfamUHpxGcKOAGuLXMotXNakTEsxgAoIquENm5
LEGadNS38k5fs+73UaxV
=7K4B
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the large set of driver core changes for 6.4-rc1.
Once again, a busy development cycle, with lots of changes happening
in the driver core in the quest to be able to move "struct bus" and
"struct class" into read-only memory, a task now complete with these
changes.
This will make the future rust interactions with the driver core more
"provably correct" as well as providing more obvious lifetime rules
for all busses and classes in the kernel.
The changes required for this did touch many individual classes and
busses as many callbacks were changed to take const * parameters
instead. All of these changes have been submitted to the various
subsystem maintainers, giving them plenty of time to review, and most
of them actually did so.
Other than those changes, included in here are a small set of other
things:
- kobject logging improvements
- cacheinfo improvements and updates
- obligatory fw_devlink updates and fixes
- documentation updates
- device property cleanups and const * changes
- firwmare loader dependency fixes.
All of these have been in linux-next for a while with no reported
problems"
* tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (120 commits)
device property: make device_property functions take const device *
driver core: update comments in device_rename()
driver core: Don't require dynamic_debug for initcall_debug probe timing
firmware_loader: rework crypto dependencies
firmware_loader: Strip off \n from customized path
zram: fix up permission for the hot_add sysfs file
cacheinfo: Add use_arch[|_cache]_info field/function
arch_topology: Remove early cacheinfo error message if -ENOENT
cacheinfo: Check cache properties are present in DT
cacheinfo: Check sib_leaf in cache_leaves_are_shared()
cacheinfo: Allow early level detection when DT/ACPI info is missing/broken
cacheinfo: Add arm64 early level initializer implementation
cacheinfo: Add arch specific early level initializer
tty: make tty_class a static const structure
driver core: class: remove struct class_interface * from callbacks
driver core: class: mark the struct class in struct class_interface constant
driver core: class: make class_register() take a const *
driver core: class: mark class_release() as taking a const *
driver core: remove incorrect comment for device_create*
MIPS: vpe-cmp: remove module owner pointer from struct class usage.
...
The ACPI thermal driver creates extra sysfs attributes in its own
directory pointing to the thermal zone it is related to and add a
pointer to the sysfs ACPI thermal device from the thermal zone sysfs
entry.
This is very specific to this ACPI thermal driver, let's encapsulate
the related creation/deletion code to group it inside a function we
can identify later for removal if needed.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
[ rjw: Subject adjustment, removal of trailing white space ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
In order to get the device associated with the thermal zone, let's use
the wrapper thermal_zone_device() instead of accessing directly the
content of the thermal zone device structure.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
[ rjw: Subject adjustment, removal of trailing white space ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The Wi-Fi module in x86 Apple machines has a "module-instance" device
property that specifies the platform type and is used for firmware
selection. Its value is a string, so add support for string values in
acpi_extract_apple_properties().
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The LSM303D on the Lenovo Yoga Tablet 2 series is present
as both ACCL0001 and MAGN0001. As we can only ever register an
i2c client for one of them, ignore MAGN0001.
Currently this errors:
i2c i2c-4: Failed to register i2c client MAGN0001:00 at 0x1d (-16)
Tested on a Lenovo Yoga Tablet 2 1051-F.
Signed-off-by: Marius Hoch <mail@mariushoch.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The CPR3 power resource on the Toshiba Click Mini toggles a GPIO
which is called SISP (for SIS touchscreen power?) on/off.
This CPR3 power resource is not listed in any _PR? lists, let alone
in a _PR0 list for the SIS0817 touchscreen ACPI device which needs it.
Before commit a1224f34d7 ("ACPI: PM: Check states of power resources
during initialization") this was not an issue because since nothing
referenced the CPR3 power resource its state was always
ACPI_POWER_RESOURCE_STATE_UNKNOWN and power resources with this state
get ignored by acpi_turn_off_unused_power_resources().
This clearly is a bug in the DSDT of this device. Add a DMI quirk
to make acpi_turn_off_unused_power_resources() a no-op on this
model to fix the touchscreen no longer working since kernel 5.16 .
This quirk also causes 2 other power resources to not get turned
off, but the _OFF method on these already was a no-op, so this makes
no difference for the other 2 power resources.
Fixes: a1224f34d7 ("ACPI: PM: Check states of power resources during initialization")
Reported-by: Gé Koerkamp <ge.koerkamp@gmail.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216946
Link: https://lore.kernel.org/regressions/32a14a8a-9795-4c8c-7e00-da9012f548f8@leemhuis.info/
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
- Fix the frequency unit in cpufreq_verify_current_freq checks()
(Sanjay Chandrashekara).
- Make mode_state_machine in amd-pstate static (Tom Rix).
- Make the cpufreq core require drivers with target_index() to set
freq_table (Viresh Kumar).
- Fix typo in the ARM_BRCMSTB_AVS_CPUFREQ Kconfig entry (Jingyu Wang).
- Use of_property_read_bool() for boolean properties in the pmac32
cpufreq driver (Rob Herring).
- Make the cpufreq sysfs interface return proper error codes on
obviously invalid input (qinyu).
- Add guided autonomous mode support to the AMD P-state driver (Wyes
Karny).
- Make the Intel P-state driver enable HWP IO boost on all server
platforms (Srinivas Pandruvada).
- Add opp and bandwidth support to tegra194 cpufreq driver (Sumit
Gupta).
- Use of_property_present() for testing DT property presence (Rob
Herring).
- Remove MODULE_LICENSE in non-modules (Nick Alcock).
- Add SM7225 to cpufreq-dt-platdev blocklist (Luca Weiss).
- Optimizations and fixes for qcom-cpufreq-hw driver (Krzysztof
Kozlowski, Konrad Dybcio, and Bjorn Andersson).
- DT binding updates for qcom-cpufreq-hw driver (Konrad Dybcio and
Bartosz Golaszewski).
- Updates and fixes for mediatek driver (Jia-Wei Chang and
AngeloGioacchino Del Regno).
- Use of_property_present() for testing DT property presence in the
cpuidle code (Rob Herring).
- Drop unnecessary (void *) conversions from the PM core (Li zeming).
- Add sysfs files to represent time spent in a platform sleep state
during suspend-to-idle and make AMD and Intel PMC drivers use them
(Mario Limonciello).
- Use of_property_present() for testing DT property presence (Rob
Herring).
- Add set_required_opps() callback to the 'struct opp_table', to make
the code paths cleaner (Viresh Kumar).
- Update the pm-graph siute of utilities to v5.11 with the following
changes:
* New script which allows users to install the latest pm-graph
from the upstream github repo.
* Update all the dmesg suspend/resume PM print formats to be able to
process recent timelines using dmesg only.
* Add ethtool output to the log for the system's ethernet device if
ethtool exists.
* Make the tool more robustly handle events where mangled dmesg or
ftrace outputs do not include all the requisite data.
- Make the sleepgraph utility recognize "CPU killed" messages (Xueqin
Luo).
- Remove unneeded SRCU selection in Kconfig because it's always set
from devfreq core (Paul E. McKenney).
- Drop of_match_ptr() macro from exynos-bus.c because this driver is
always using the DT table for driver probe (Krzysztof Kozlowski).
- Use the preferred of_property_present() instead of the low-level
of_get_property() on exynos-bus.c (Rob Herring).
- Use devm_platform_get_and_ioream_resource() in exyno-ppmu.c (Yang Li).
-----BEGIN PGP SIGNATURE-----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=p/5G
-----END PGP SIGNATURE-----
Merge tag 'pm-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These update several cpufreq drivers and the cpufreq core, add sysfs
interface for exposing the time really spent in the platform low-power
state during suspend-to-idle, update devfreq (core and drivers) and
the pm-graph suite of tools and clean up code.
Specifics:
- Fix the frequency unit in cpufreq_verify_current_freq checks()
Sanjay Chandrashekara)
- Make mode_state_machine in amd-pstate static (Tom Rix)
- Make the cpufreq core require drivers with target_index() to set
freq_table (Viresh Kumar)
- Fix typo in the ARM_BRCMSTB_AVS_CPUFREQ Kconfig entry (Jingyu Wang)
- Use of_property_read_bool() for boolean properties in the pmac32
cpufreq driver (Rob Herring)
- Make the cpufreq sysfs interface return proper error codes on
obviously invalid input (qinyu)
- Add guided autonomous mode support to the AMD P-state driver (Wyes
Karny)
- Make the Intel P-state driver enable HWP IO boost on all server
platforms (Srinivas Pandruvada)
- Add opp and bandwidth support to tegra194 cpufreq driver (Sumit
Gupta)
- Use of_property_present() for testing DT property presence (Rob
Herring)
- Remove MODULE_LICENSE in non-modules (Nick Alcock)
- Add SM7225 to cpufreq-dt-platdev blocklist (Luca Weiss)
- Optimizations and fixes for qcom-cpufreq-hw driver (Krzysztof
Kozlowski, Konrad Dybcio, and Bjorn Andersson)
- DT binding updates for qcom-cpufreq-hw driver (Konrad Dybcio and
Bartosz Golaszewski)
- Updates and fixes for mediatek driver (Jia-Wei Chang and
AngeloGioacchino Del Regno)
- Use of_property_present() for testing DT property presence in the
cpuidle code (Rob Herring)
- Drop unnecessary (void *) conversions from the PM core (Li zeming)
- Add sysfs files to represent time spent in a platform sleep state
during suspend-to-idle and make AMD and Intel PMC drivers use them
Mario Limonciello)
- Use of_property_present() for testing DT property presence (Rob
Herring)
- Add set_required_opps() callback to the 'struct opp_table', to make
the code paths cleaner (Viresh Kumar)
- Update the pm-graph siute of utilities to v5.11 with the following
changes:
* New script which allows users to install the latest pm-graph
from the upstream github repo.
* Update all the dmesg suspend/resume PM print formats to be able
to process recent timelines using dmesg only.
* Add ethtool output to the log for the system's ethernet device
if ethtool exists.
* Make the tool more robustly handle events where mangled dmesg
or ftrace outputs do not include all the requisite data.
- Make the sleepgraph utility recognize "CPU killed" messages (Xueqin
Luo)
- Remove unneeded SRCU selection in Kconfig because it's always set
from devfreq core (Paul E. McKenney)
- Drop of_match_ptr() macro from exynos-bus.c because this driver is
always using the DT table for driver probe (Krzysztof Kozlowski)
- Use the preferred of_property_present() instead of the low-level
of_get_property() on exynos-bus.c (Rob Herring)
- Use devm_platform_get_and_ioream_resource() in exyno-ppmu.c (Yang
Li)"
* tag 'pm-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (44 commits)
platform/x86/intel/pmc: core: Report duration of time in HW sleep state
platform/x86/intel/pmc: core: Always capture counters on suspend
platform/x86/amd: pmc: Report duration of time in hw sleep state
PM: Add sysfs files to represent time spent in hardware sleep state
cpufreq: use correct unit when verify cur freq
cpufreq: tegra194: add OPP support and set bandwidth
cpufreq: amd-pstate: Make varaiable mode_state_machine static
PM: core: Remove unnecessary (void *) conversions
cpufreq: drivers with target_index() must set freq_table
PM / devfreq: exynos-ppmu: Use devm_platform_get_and_ioremap_resource()
OPP: Move required opps configuration to specialized callback
OPP: Handle all genpd cases together in _set_required_opps()
cpufreq: qcom-cpufreq-hw: Revert adding cpufreq qos
dt-bindings: cpufreq: cpufreq-qcom-hw: Add QCM2290
dt-bindings: cpufreq: cpufreq-qcom-hw: Sanitize data per compatible
dt-bindings: cpufreq: cpufreq-qcom-hw: Allow just 1 frequency domain
cpufreq: Add SM7225 to cpufreq-dt-platdev blocklist
cpufreq: qcom-cpufreq-hw: fix double IO unmap and resource release on exit
cpufreq: mediatek: Raise proc and sram max voltage for MT7622/7623
cpufreq: mediatek: raise proc/sram max voltage for MT8516
...
- Update the ACPICA code in the kernel to upstream revision 20230331
including the following changes:
* Delete bogus node_array array of pointers from AEST table (Jessica
Clarke).
* Add support for trace buffer extension in GICC to the ACPI MADT
parser (Xiongfeng Wang).
* Add missing macro ACPI_FUNCTION_TRACE() for acpi_ns_repair_HID()
(Xiongfeng Wang).
* Add missing tables to astable (Pedro Falcato).
* Add support for 64 bit loong_arch compilation to ACPICA (Huacai
Chen).
* Add support for ASPT table in disassembler to ACPICA (Jeremi
Piotrowski).
* Add support for Arm's MPAM ACPI table version 2 (Hesham Almatary).
* Update all copyrights/signons in ACPICA to 2023 (Bob Moore).
* Add support for ClockInput resource (v6.5) (Niyas Sait).
* Add RISC-V INTC interrupt controller definition to the list of
supported interrupt controllers for MADT (Sunil V L).
* Add structure definitions for the RISC-V RHCT ACPI table (Sunil V L).
* Address several cases in which the ACPICA code might lead to
undefined behavior (Tamir Duberstein).
* Make ACPICA code support flexible arrays properly (Kees Cook).
* Check null return of ACPI_ALLOCATE_ZEROED in
acpi_db_display_objects() (void0red).
* Add os specific support for Zephyr RTOS to ACPICA (Najumon).
* Update version to 20230331 (Bob Moore).
- Fix evaluating the _PDC ACPI control method when running as Xen
dom0 (Roger Pau Monne).
- Use platform devices to load ACPI PPC and PCC drivers (Petr Pavlu).
- Check for null return of devm_kzalloc() in fch_misc_setup() (Kang
Chen).
- Log a message if enable_irq_wake() fails for the ACPI SCI (Simon
Gaiser).
- Initialize the correct IOMMU fwspec while parsing ACPI VIOT
(Jean-Philippe Brucker).
- Amend indentation and prefix error messages with FW_BUG in the ACPI
SPCR parsing code (Andy Shevchenko).
- Enable ACPI sysfs support for CCEL records (Kuppuswamy
Sathyanarayanan).
- Make the APEI error injection code warn on invalid arguments when
explicitly indicated by platform (Shuai Xue).
- Add CXL error types to the error injection code in APEI (Tony Luck).
- Refactor acpi_data_prop_read_single() (Andy Shevchenko).
- Fix two issues in the ACPI SBS driver (Armin Wolf).
- Replace ternary operator with min_t() in the generic ACPI thermal
zone driver (Jiangshan Yi).
- Ensure that ACPI notify handlers are not running after removal and
clean up code in acpi_sb_notify() (Rafael Wysocki).
- Remove register_backlight_delay module option and code and remove
quirks for false-positive backlight control support advertised on
desktop boards (Hans de Goede).
- Replace irqdomain.h include with struct declarations in ACPI headers
and update several pieces of code previously including of.h
implicitly through those headers (Rob Herring).
- Fix acpi_evaluate_dsm_typed() redefinition error (Kiran K).
- Update the pm_profile sysfs attribute documentation (Rafael Wysocki).
- Add 80862289 ACPI _HID for second PWM controller on Cherry Trail to
the ACPI driver for Intel SoCs (Hans de Goede).
-----BEGIN PGP SIGNATURE-----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=O61K
-----END PGP SIGNATURE-----
Merge tag 'acpi-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"These update the ACPICA code in the kernel to upstream revision
20230331, fix the ACPI SBS driver and the evaluation of the _PDC
method on Xen dom0 in the ACPI processor driver, update the ACPI
driver for Intel SoCs and clean up code in multiple places.
Specifics:
- Update the ACPICA code in the kernel to upstream revision 20230331
including the following changes:
* Delete bogus node_array array of pointers from AEST table
(Jessica Clarke)
* Add support for trace buffer extension in GICC to the ACPI MADT
parser (Xiongfeng Wang)
* Add missing macro ACPI_FUNCTION_TRACE() for
acpi_ns_repair_HID() (Xiongfeng Wang)
* Add missing tables to astable (Pedro Falcato)
* Add support for 64 bit loong_arch compilation to ACPICA (Huacai
Chen)
* Add support for ASPT table in disassembler to ACPICA (Jeremi
Piotrowski)
* Add support for Arm's MPAM ACPI table version 2 (Hesham
Almatary)
* Update all copyrights/signons in ACPICA to 2023 (Bob Moore)
* Add support for ClockInput resource (v6.5) (Niyas Sait)
* Add RISC-V INTC interrupt controller definition to the list of
supported interrupt controllers for MADT (Sunil V L)
* Add structure definitions for the RISC-V RHCT ACPI table (Sunil
V L)
* Address several cases in which the ACPICA code might lead to
undefined behavior (Tamir Duberstein)
* Make ACPICA code support flexible arrays properly (Kees Cook)
* Check null return of ACPI_ALLOCATE_ZEROED in
acpi_db_display_objects() (void0red)
* Add os specific support for Zephyr RTOS to ACPICA (Najumon)
* Update version to 20230331 (Bob Moore)
- Fix evaluating the _PDC ACPI control method when running as Xen
dom0 (Roger Pau Monne)
- Use platform devices to load ACPI PPC and PCC drivers (Petr Pavlu)
- Check for null return of devm_kzalloc() in fch_misc_setup() (Kang
Chen)
- Log a message if enable_irq_wake() fails for the ACPI SCI (Simon
Gaiser)
- Initialize the correct IOMMU fwspec while parsing ACPI VIOT
(Jean-Philippe Brucker)
- Amend indentation and prefix error messages with FW_BUG in the ACPI
SPCR parsing code (Andy Shevchenko)
- Enable ACPI sysfs support for CCEL records (Kuppuswamy
Sathyanarayanan)
- Make the APEI error injection code warn on invalid arguments when
explicitly indicated by platform (Shuai Xue)
- Add CXL error types to the error injection code in APEI (Tony Luck)
- Refactor acpi_data_prop_read_single() (Andy Shevchenko)
- Fix two issues in the ACPI SBS driver (Armin Wolf)
- Replace ternary operator with min_t() in the generic ACPI thermal
zone driver (Jiangshan Yi)
- Ensure that ACPI notify handlers are not running after removal and
clean up code in acpi_sb_notify() (Rafael Wysocki)
- Remove register_backlight_delay module option and code and remove
quirks for false-positive backlight control support advertised on
desktop boards (Hans de Goede)
- Replace irqdomain.h include with struct declarations in ACPI
headers and update several pieces of code previously including of.h
implicitly through those headers (Rob Herring)
- Fix acpi_evaluate_dsm_typed() redefinition error (Kiran K)
- Update the pm_profile sysfs attribute documentation (Rafael
Wysocki)
- Add 80862289 ACPI _HID for second PWM controller on Cherry Trail to
the ACPI driver for Intel SoCs (Hans de Goede)"
* tag 'acpi-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (64 commits)
ACPI: LPSS: Add 80862289 ACPI _HID for second PWM controller on Cherry Trail
ACPI: bus: Ensure that notify handlers are not running after removal
ACPI: bus: Add missing braces to acpi_sb_notify()
ACPI: video: Remove desktops without backlight DMI quirks
ACPI: video: Remove register_backlight_delay module option and code
ACPI: Replace irqdomain.h include with struct declarations
fpga: lattice-sysconfig-spi: Add explicit include for of.h
tpm: atmel: Add explicit include for of.h
virtio-mmio: Add explicit include for of.h
pata: ixp4xx: Add explicit include for of.h
ata: pata_macio: Add explicit include of irqdomain.h
serial: 8250_tegra: Add explicit include for of.h
net: rfkill-gpio: Add explicit include for of.h
staging: iio: resolver: ad2s1210: Add explicit include for of.h
iio: adc: ad7292: Add explicit include for of.h
ACPICA: Update version to 20230331
ACPICA: add os specific support for Zephyr RTOS
ACPICA: ACPICA: check null return of ACPI_ALLOCATE_ZEROED in acpi_db_display_objects
ACPICA: acpi_resource_irq: Replace 1-element arrays with flexible array
ACPICA: acpi_madt_oem_data: Fix flexible array member definition
...
- Add a thermal zone 'devdata' accessor and modify several drivers to
use it (Daniel Lezcano).
- Prevent drivers from using the 'device' internal thermal zone
structure field directly (Daniel Lezcano).
- Clean up the hwmon thermal driver (Daniel Lezcano).
- Add thermal zone id accessor and thermal zone type accessor
and prevent drivers from using thermal zone fields directly (Daniel
Lezcano).
- Clean up the acerhdf and tegra thermal drivers (Daniel Lezcano).
- Add lower bound check for sysfs input to the x86_pkg_temp_thermal
Intel thermal driver (Zhang Rui).
- Add more thermal zone device encapsulation: prevent setting structure
field directly, access the sensor device instead the thermal zone's
device for trace, relocate the traces in drivers/thermal (Daniel
Lezcano).
- Use the generic trip point for the i.MX and remove the get_trip_temp
ops (Daniel Lezcano).
- Use the devm_platform_ioremap_resource() in the Hisilicon driver
(Yang Li).
- Remove R-Car H3 ES1.* handling as public has only access to the ES2
version and the upstream support for the ES1 has been shutdown (Wolfram
Sang).
- Add a delay after initializing the bank in order to let the time to
the hardware to initialze itself before reading the temperature
(Amjad Ouled-Ameur).
- Add MT8365 support (Amjad Ouled-Ameur).
- Preparational cleanup and DT bindings for RK3588 support (Sebastian
Reichel).
- Add driver support for RK3588 (Finley Xiao).
- Use devm_reset_control_array_get_exclusive() for the Rockchip driver
(Ye Xingchen).
- Detect power gated thermal zones and return -EAGAIN when reading the
temperature (Mikko Perttunen).
- Remove thermal_bind_params structure as it is unused (Zhang Rui)
- Drop unneeded quotes in DT bindings allowing to run yamllint (Rob
Herring).
- Update the power allocator documentation according to the thermal
trace relocation (Lukas Bulwahn).
- Fix sensor 1 interrupt status bitmask for the Mediatek LVTS sensor
(Chen-Yu Tsai).
- Use the dev_err_probe() helper in the Amlogic driver (Ye Xingchen).
- Add AP domain support to LVTS thermal controllers for mt8195
(Balsam CHIHI).
- Remove buggy call to thermal_of_zone_unregister() (Daniel Lezcano).
- Make thermal_of_zone_[un]register() private to the thermal OF code
(Daniel Lezcano).
- Create a private copy of the thermal zone device parameters
structure when registering a thermal zone (Daniel Lezcano).
- Fix a kernel NULL pointer dereference in thermal_hwmon (Zhang Rui).
- Revert recent message adjustment in thermal_hwmon (Rafael Wysocki).
- Use of_property_present() for testing DT property presence in
thermal control code (Rob Herring).
- Clean up thermal_list_lock locking in the thermal core (Rafael
Wysocki).
- Add DLVR support for RFIM control in the int340x Intel thermal
driver (Srinivas Pandruvada).
-----BEGIN PGP SIGNATURE-----
iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAmRGvsYSHHJqd0Byand5
c29ja2kubmV0AAoJEILEb/54YlRxekAQAJ/hhUZyY2hcFveNfrutkO8OGY+/rtz8
ozMxyfwAdHoD6/zg9zZQTHSQy3W9rx2FC3tYtwHlJopDYFQuNPsfrhYE97EfO9uT
Baou3OhoXV+ZJ0EZqIuTNuLaDPD/Hg8KSNmZvb6p/30bLR3Y/gKZutX9+S0x8qpG
y7JcA8qPDYTvNfxkDjYv3M7HlfpwIwpi/xPFuw9nI2Fdw0SYRWpHAQlNj6oaF0xT
EaNIg5zh4rR81T34/DpaOm1mfrg3Lg9xOJMU0laS5sKkn5Ea8s0E5s3vb5Quup61
eXL3DhxmsIv51+1URZMZIQo2FmogvLmgnIPQyaeSvtlic0t39YS70tL2i8JY6kfL
Tkhm8bS8jKQ6Y8GUvUbE/qadWFgkV4/lFTREVkKuq0XUU/YEpl5iQJAc0iEa0soy
SISucs/ugoFjqdlN1pNDv7mLIzqyYIF6tZekLZTVa1U++MHKRakY9folD3brc6xO
ewp1yO6e/fYZJx0K8LNlBRzXqNuV1Tl+kBDvUNHDNAEN8jONiZ2v+pDQ+VqYYxIc
1A2KVw0l3m0MQ97w3E8LqYJTH6f8bxSLxjXnHLSN0eAXJkn10olfz/RYNsqi+dUb
YBnFU8t3plGMVGrDcoDtO6hkujUw3oF7pibWeXXFEvIyRUcOA2e94kd57i9a1zLS
5yyH9UchFcQq
=XNJE
-----END PGP SIGNATURE-----
Merge tag 'thermal-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control updates from Rafael Wysocki:
"These mostly continue to prepare the thermal control subsystem for
using unified representation of trip points, which includes cleanups,
code refactoring and similar and update several drivers (for other
reasons), which includes new hardware support.
Specifics:
- Add a thermal zone 'devdata' accessor and modify several drivers to
use it (Daniel Lezcano)
- Prevent drivers from using the 'device' internal thermal zone
structure field directly (Daniel Lezcano)
- Clean up the hwmon thermal driver (Daniel Lezcano)
- Add thermal zone id accessor and thermal zone type accessor and
prevent drivers from using thermal zone fields directly (Daniel
Lezcano)
- Clean up the acerhdf and tegra thermal drivers (Daniel Lezcano)
- Add lower bound check for sysfs input to the x86_pkg_temp_thermal
Intel thermal driver (Zhang Rui)
- Add more thermal zone device encapsulation: prevent setting
structure field directly, access the sensor device instead the
thermal zone's device for trace, relocate the traces in
drivers/thermal (Daniel Lezcano)
- Use the generic trip point for the i.MX and remove the
get_trip_temp ops (Daniel Lezcano)
- Use the devm_platform_ioremap_resource() in the Hisilicon driver
(Yang Li)
- Remove R-Car H3 ES1.* handling as public has only access to the ES2
version and the upstream support for the ES1 has been shutdown
(Wolfram Sang)
- Add a delay after initializing the bank in order to let the time to
the hardware to initialze itself before reading the temperature
(Amjad Ouled-Ameur)
- Add MT8365 support (Amjad Ouled-Ameur)
- Preparational cleanup and DT bindings for RK3588 support (Sebastian
Reichel)
- Add driver support for RK3588 (Finley Xiao)
- Use devm_reset_control_array_get_exclusive() for the Rockchip
driver (Ye Xingchen)
- Detect power gated thermal zones and return -EAGAIN when reading
the temperature (Mikko Perttunen)
- Remove thermal_bind_params structure as it is unused (Zhang Rui)
- Drop unneeded quotes in DT bindings allowing to run yamllint (Rob
Herring)
- Update the power allocator documentation according to the thermal
trace relocation (Lukas Bulwahn)
- Fix sensor 1 interrupt status bitmask for the Mediatek LVTS sensor
(Chen-Yu Tsai)
- Use the dev_err_probe() helper in the Amlogic driver (Ye Xingchen)
- Add AP domain support to LVTS thermal controllers for mt8195
(Balsam CHIHI)
- Remove buggy call to thermal_of_zone_unregister() (Daniel Lezcano)
- Make thermal_of_zone_[un]register() private to the thermal OF code
(Daniel Lezcano)
- Create a private copy of the thermal zone device parameters
structure when registering a thermal zone (Daniel Lezcano)
- Fix a kernel NULL pointer dereference in thermal_hwmon (Zhang Rui)
- Revert recent message adjustment in thermal_hwmon (Rafael Wysocki)
- Use of_property_present() for testing DT property presence in
thermal control code (Rob Herring)
- Clean up thermal_list_lock locking in the thermal core (Rafael
Wysocki)
- Add DLVR support for RFIM control in the int340x Intel thermal
driver (Srinivas Pandruvada)"
* tag 'thermal-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (55 commits)
thermal: intel: int340x: Add DLVR support for RFIM control
thermal/core: Alloc-copy-free the thermal zone parameters structure
thermal/of: Unexport unused OF functions
thermal/drivers/bcm2835: Remove buggy call to thermal_of_zone_unregister
thermal/drivers/mediatek/lvts_thermal: Add AP domain for mt8195
dt-bindings: thermal: mediatek: Add AP domain to LVTS thermal controllers for mt8195
thermal: amlogic: Use dev_err_probe()
thermal/drivers/mediatek/lvts_thermal: Fix sensor 1 interrupt status bitmask
MAINTAINERS: adjust entry in THERMAL/POWER_ALLOCATOR after header movement
dt-bindings: thermal: Drop unneeded quotes
thermal/core: Remove thermal_bind_params structure
thermal/drivers/tegra-bpmp: Handle offline zones
thermal/drivers/rockchip: use devm_reset_control_array_get_exclusive()
dt-bindings: rockchip-thermal: Support the RK3588 SoC compatible
thermal/drivers/rockchip: Support RK3588 SoC in the thermal driver
thermal/drivers/rockchip: Support dynamic sized sensor array
thermal/drivers/rockchip: Simplify channel id logic
thermal/drivers/rockchip: Use dev_err_probe
thermal/drivers/rockchip: Simplify clock logic
thermal/drivers/rockchip: Simplify getting match data
...
ACPI:
* Improve error reporting when failing to manage SDEI on AGDI device
removal
Assembly routines:
* Improve register constraints so that the compiler can make use of
the zero register instead of moving an immediate #0 into a GPR
* Allow the compiler to allocate the registers used for CAS
instructions
CPU features and system registers:
* Cleanups to the way in which CPU features are identified from the
ID register fields
* Extend system register definition generation to handle Enum types
when defining shared register fields
* Generate definitions for new _EL2 registers and add new fields
for ID_AA64PFR1_EL1
* Allow SVE to be disabled separately from SME on the kernel
command-line
Tracing:
* Support for "direct calls" in ftrace, which enables BPF tracing
for arm64
Kdump:
* Don't bother unmapping the crashkernel from the linear mapping,
which then allows us to use huge (block) mappings and reduce
TLB pressure when a crashkernel is loaded.
Memory management:
* Try again to remove data cache invalidation from the coherent DMA
allocation path
* Simplify the fixmap code by mapping at page granularity
* Allow the kfence pool to be allocated early, preventing the rest
of the linear mapping from being forced to page granularity
Perf and PMU:
* Move CPU PMU code out to drivers/perf/ where it can be reused
by the 32-bit ARM architecture when running on ARMv8 CPUs
* Fix race between CPU PMU probing and pKVM host de-privilege
* Add support for Apple M2 CPU PMU
* Adjust the generic PERF_COUNT_HW_BRANCH_INSTRUCTIONS event
dynamically, depending on what the CPU actually supports
* Minor fixes and cleanups to system PMU drivers
Stack tracing:
* Use the XPACLRI instruction to strip PAC from pointers, rather
than rolling our own function in C
* Remove redundant PAC removal for toolchains that handle this in
their builtins
* Make backtracing more resilient in the face of instrumentation
Miscellaneous:
* Fix single-step with KGDB
* Remove harmless warning when 'nokaslr' is passed on the kernel
command-line
* Minor fixes and cleanups across the board
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmRChcwQHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNCgBCADFvkYY9ESztSnd3EpiMbbAzgRCQBiA5H7U
F2Wc+hIWgeAeUEttSH22+F16r6Jb0gbaDvsuhtN2W/rwQhKNbCU0MaUME05MPmg2
AOp+RZb2vdT5i5S5dC6ZM6G3T6u9O78LBWv2JWBdd6RIybamEn+RL00ep2WAduH7
n1FgTbsKgnbScD2qd4K1ejZ1W/BQMwYulkNpyTsmCIijXM12lkzFlxWnMtky3uhR
POpawcIZzXvWI02QAX+SIdynGChQV3VP+dh9GuFbt7ASigDEhgunvfUYhZNSaqf4
+/q0O8toCtmQJBUhF0DEDSB5T8SOz5v9CKxKuwfaX6Trq0ixFQpZ
=78L9
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
"ACPI:
- Improve error reporting when failing to manage SDEI on AGDI device
removal
Assembly routines:
- Improve register constraints so that the compiler can make use of
the zero register instead of moving an immediate #0 into a GPR
- Allow the compiler to allocate the registers used for CAS
instructions
CPU features and system registers:
- Cleanups to the way in which CPU features are identified from the
ID register fields
- Extend system register definition generation to handle Enum types
when defining shared register fields
- Generate definitions for new _EL2 registers and add new fields for
ID_AA64PFR1_EL1
- Allow SVE to be disabled separately from SME on the kernel
command-line
Tracing:
- Support for "direct calls" in ftrace, which enables BPF tracing for
arm64
Kdump:
- Don't bother unmapping the crashkernel from the linear mapping,
which then allows us to use huge (block) mappings and reduce TLB
pressure when a crashkernel is loaded.
Memory management:
- Try again to remove data cache invalidation from the coherent DMA
allocation path
- Simplify the fixmap code by mapping at page granularity
- Allow the kfence pool to be allocated early, preventing the rest of
the linear mapping from being forced to page granularity
Perf and PMU:
- Move CPU PMU code out to drivers/perf/ where it can be reused by
the 32-bit ARM architecture when running on ARMv8 CPUs
- Fix race between CPU PMU probing and pKVM host de-privilege
- Add support for Apple M2 CPU PMU
- Adjust the generic PERF_COUNT_HW_BRANCH_INSTRUCTIONS event
dynamically, depending on what the CPU actually supports
- Minor fixes and cleanups to system PMU drivers
Stack tracing:
- Use the XPACLRI instruction to strip PAC from pointers, rather than
rolling our own function in C
- Remove redundant PAC removal for toolchains that handle this in
their builtins
- Make backtracing more resilient in the face of instrumentation
Miscellaneous:
- Fix single-step with KGDB
- Remove harmless warning when 'nokaslr' is passed on the kernel
command-line
- Minor fixes and cleanups across the board"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (72 commits)
KVM: arm64: Ensure CPU PMU probes before pKVM host de-privilege
arm64: kexec: include reboot.h
arm64: delete dead code in this_cpu_set_vectors()
arm64/cpufeature: Use helper macro to specify ID register for capabilites
drivers/perf: hisi: add NULL check for name
drivers/perf: hisi: Remove redundant initialized of pmu->name
arm64/cpufeature: Consistently use symbolic constants for min_field_value
arm64/cpufeature: Pull out helper for CPUID register definitions
arm64/sysreg: Convert HFGITR_EL2 to automatic generation
ACPI: AGDI: Improve error reporting for problems during .remove()
arm64: kernel: Fix kernel warning when nokaslr is passed to commandline
perf/arm-cmn: Fix port detection for CMN-700
arm64: kgdb: Set PSTATE.SS to 1 to re-enable single-step
arm64: move PAC masks to <asm/pointer_auth.h>
arm64: use XPACLRI to strip PAC
arm64: avoid redundant PAC stripping in __builtin_return_address()
arm64/sme: Fix some comments of ARM SME
arm64/signal: Alloc tpidr2 sigframe after checking system_supports_tpidr2()
arm64/signal: Use system_supports_tpidr2() to check TPIDR2
arm64/idreg: Don't disable SME when disabling SVE
...
Merge cpufreq updates for 6.4-rc1:
- Fix the frequency unit in cpufreq_verify_current_freq checks()
(Sanjay Chandrashekara).
- Make mode_state_machine in amd-pstate static (Tom Rix).
- Make the cpufreq core require drivers with target_index() to set
freq_table (Viresh Kumar).
- Fix typo in the ARM_BRCMSTB_AVS_CPUFREQ Kconfig entry (Jingyu Wang).
- Use of_property_read_bool() for boolean properties in the pmac32
cpufreq driver (Rob Herring).
- Make the cpufreq sysfs interface return proper error codes on
obviously invalid input (qinyu).
- Add guided autonomous mode support to the AMD P-state driver (Wyes
Karny).
- Make the Intel P-state driver enable HWP IO boost on all server
platforms (Srinivas Pandruvada).
- Add opp and bandwidth support to tegra194 cpufreq driver (Sumit
Gupta).
- Use of_property_present() for testing DT property presence (Rob
Herring).
- Remove MODULE_LICENSE in non-modules (Nick Alcock).
- Add SM7225 to cpufreq-dt-platdev blocklist (Luca Weiss).
- Optimizations and fixes for qcom-cpufreq-hw driver (Krzysztof
Kozlowski, Konrad Dybcio, and Bjorn Andersson).
- DT binding updates for qcom-cpufreq-hw driver (Konrad Dybcio and
Bartosz Golaszewski).
- Updates and fixes for mediatek driver (Jia-Wei Chang and
AngeloGioacchino Del Regno).
* pm-cpufreq: (29 commits)
cpufreq: use correct unit when verify cur freq
cpufreq: tegra194: add OPP support and set bandwidth
cpufreq: amd-pstate: Make varaiable mode_state_machine static
cpufreq: drivers with target_index() must set freq_table
cpufreq: qcom-cpufreq-hw: Revert adding cpufreq qos
dt-bindings: cpufreq: cpufreq-qcom-hw: Add QCM2290
dt-bindings: cpufreq: cpufreq-qcom-hw: Sanitize data per compatible
dt-bindings: cpufreq: cpufreq-qcom-hw: Allow just 1 frequency domain
cpufreq: Add SM7225 to cpufreq-dt-platdev blocklist
cpufreq: qcom-cpufreq-hw: fix double IO unmap and resource release on exit
cpufreq: mediatek: Raise proc and sram max voltage for MT7622/7623
cpufreq: mediatek: raise proc/sram max voltage for MT8516
cpufreq: mediatek: fix KP caused by handler usage after regulator_put/clk_put
cpufreq: mediatek: fix passing zero to 'PTR_ERR'
cpufreq: pmac32: Use of_property_read_bool() for boolean properties
cpufreq: Fix typo in the ARM_BRCMSTB_AVS_CPUFREQ Kconfig entry
cpufreq: warn about invalid vals to scaling_max/min_freq interfaces
Documentation: cpufreq: amd-pstate: Update amd_pstate status sysfs for guided
cpufreq: amd-pstate: Add guided mode control support via sysfs
cpufreq: amd-pstate: Add guided autonomous mode
...
Merge ACPI bus type driver changes, ACPI backlight driver updates and a
series of cleanups related to of.h for 6.4-rc1:
- Ensure that ACPI notify handlers are not running after removal and
clean up code in acpi_sb_notify() (Rafael Wysocki).
- Remove register_backlight_delay module option and code and remove
quirks for false-positive backlight control support advertised on
desktop boards (Hans de Goede).
- Replace irqdomain.h include with struct declarations in ACPI headers
and update several pieces of code previously including of.h
implicitly through those headers (Rob Herring).
* acpi-bus:
ACPI: bus: Ensure that notify handlers are not running after removal
ACPI: bus: Add missing braces to acpi_sb_notify()
* acpi-video:
ACPI: video: Remove desktops without backlight DMI quirks
ACPI: video: Remove register_backlight_delay module option and code
* acpi-misc:
ACPI: Replace irqdomain.h include with struct declarations
fpga: lattice-sysconfig-spi: Add explicit include for of.h
tpm: atmel: Add explicit include for of.h
virtio-mmio: Add explicit include for of.h
pata: ixp4xx: Add explicit include for of.h
ata: pata_macio: Add explicit include of irqdomain.h
serial: 8250_tegra: Add explicit include for of.h
net: rfkill-gpio: Add explicit include for of.h
staging: iio: resolver: ad2s1210: Add explicit include for of.h
iio: adc: ad7292: Add explicit include for of.h
Merge ACPI processor driver changes, ACPI power management updates,
changes related to parsing ACPI tables and an ACPI sysfs interface
update for 6.4-rc1:
- Fix evaluating the _PDC ACPI control method when running as Xen
dom0 (Roger Pau Monne).
- Use platform devices to load ACPI PPC and PCC drivers (Petr Pavlu).
- Check for null return of devm_kzalloc() in fch_misc_setup() (Kang
Chen).
- Log a message if enable_irq_wake() fails for the ACPI SCI (Simon
Gaiser).
- Initialize the correct IOMMU fwspec while parsing ACPI VIOT
(Jean-Philippe Brucker).
- Amend indentation and prefix error messages with FW_BUG in the ACPI
SPCR parsing code (Andy Shevchenko).
- Enable ACPI sysfs support for CCEL records (Kuppuswamy
Sathyanarayanan).
* acpi-processor:
ACPI: processor: Fix evaluating _PDC method when running as Xen dom0
ACPI: cpufreq: Use platform devices to load ACPI PPC and PCC drivers
ACPI: processor: Check for null return of devm_kzalloc() in fch_misc_setup()
* acpi-pm:
ACPI: s2idle: Log when enabling wakeup IRQ fails
* acpi-tables:
ACPI: VIOT: Initialize the correct IOMMU fwspec
ACPI: SPCR: Amend indentation
ACPI: SPCR: Prefix error messages with FW_BUG
* acpi-sysfs:
ACPI: sysfs: Enable ACPI sysfs support for CCEL records
Merge ACPICA material for 6.4-rc1:
- Delete bogus node_array array of pointers from AEST table (Jessica
Clarke).
- Add support for trace buffer extension in GICC to the ACPI MADT
parser (Xiongfeng Wang).
- Add missing macro ACPI_FUNCTION_TRACE() for acpi_ns_repair_HID()
(Xiongfeng Wang).
- Add missing tables to astable (Pedro Falcato).
- Add support for 64 bit loong_arch compilation to ACPICA (Huacai
Chen).
- Add support for ASPT table in disassembler to ACPICA (Jeremi
Piotrowski).
- Add support for Arm's MPAM ACPI table version 2 (Hesham Almatary).
- Update all copyrights/signons in ACPICA to 2023 (Bob Moore).
- Add support for ClockInput resource (v6.5) (Niyas Sait).
- Add RISC-V INTC interrupt controller definition to the list of
supported interrupt controllers for MADT (Sunil V L).
- Add structure definitions for the RISC-V RHCT ACPI table (Sunil V L).
- Address several cases in which the ACPICA code might lead to
undefined behavior (Tamir Duberstein).
- Make ACPICA code support flexible arrays properly (Kees Cook).
- Check null return of ACPI_ALLOCATE_ZEROED in
acpi_db_display_objects() (void0red).
- Add os specific support for Zephyr RTOS to ACPICA (Najumon).
- Update version to 20230331 (Bob Moore).
* acpica: (32 commits)
ACPICA: Update version to 20230331
ACPICA: add os specific support for Zephyr RTOS
ACPICA: ACPICA: check null return of ACPI_ALLOCATE_ZEROED in acpi_db_display_objects
ACPICA: acpi_resource_irq: Replace 1-element arrays with flexible array
ACPICA: acpi_madt_oem_data: Fix flexible array member definition
ACPICA: acpi_dmar_andd: Replace 1-element array with flexible array
ACPICA: acpi_pci_routing_table: Replace fixed-size array with flex array member
ACPICA: struct acpi_resource_dma: Replace 1-element array with flexible array
ACPICA: Introduce ACPI_FLEX_ARRAY
ACPICA: struct acpi_nfit_interleave: Replace 1-element array with flexible array
ACPICA: actbl2: Replace 1-element arrays with flexible arrays
ACPICA: actbl1: Replace 1-element arrays with flexible arrays
ACPICA: struct acpi_resource_vendor: Replace 1-element array with flexible array
ACPICA: Avoid undefined behavior: load of misaligned address
ACPICA: Avoid undefined behavior: member access within misaligned address
ACPICA: Avoid undefined behavior: member access within misaligned address
ACPICA: Avoid undefined behavior: member access within misaligned address
ACPICA: Avoid undefined behavior: member access within misaligned address
ACPICA: Avoid undefined behavior: member access within null pointer
ACPICA: Avoid undefined behavior: applying zero offset to null pointer
...
On some Cherry Trail devices the second PWM controller uses
80862289 as ACPI _HID, rather then using 80862288 as is done
for both controllers on most models.
Add the missing 80862289 ACPI _HID, note this uses its own
lpss_device_desc, without ".setup = bsw_pwm_setup" so that
the pwm_lookup is not added for it.
On devices where both controllers use the 80862288 _HID bsw_pwm_setup()
does a UID check to avoid registering the lookup for the second
controller but that will not work here.
Adding the missing id fixes the second PWM controller no longer
working after the entire LPSS1 island has been in D3 at least
once, which causes the contents of the LPSS private registers
to get lost. Adding the _HID makes acpi_lpss restore these
when the controller moves from D3 to D0.
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Currently, acpi_device_remove_notify_handler() may return while the
notify handler being removed is still running which may allow the
module holding that handler to be torn down prematurely.
Address this issue by making acpi_device_remove_notify_handler() wait
for the handling of all the ACPI events in progress to complete before
returning.
Fixes: 5894b0c46e ("ACPI / scan: Move bus operations and notification routines to bus.c")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Returning an error value in a platform driver's remove callback results in
a generic error message being emitted by the driver core, but otherwise it
doesn't make a difference. The device goes away anyhow.
So instead of triggering the generic platform error message, emit a more
helpful message if a problem occurs and return 0 to suppress the generic
message.
This patch is a preparation for making platform remove callbacks return
void.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Link: https://lore.kernel.org/r/20221014160623.467195-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Will Deacon <will@kernel.org>
Merge a quirk to force StorageD3Enable on AMD Picasso systems (Mario
Limonciello).
* acpi-x86:
ACPI: x86: utils: Add Picasso to the list for forcing StorageD3Enable
After the recent backlight changes acpi_video# backlight devices are only
registered when explicitly requested from the cmdline, by DMI quirk or by
the GPU driver.
This means that we no longer get false-positive backlight control support
advertised on desktop boards.
Remove the 3 DMI quirks for desktop boards where the false-positive issue
was fixed through quirks before. Note many more desktop boards were
affected but we never build a full quirk list for this.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Since commit 5aa9d943e9 ("ACPI: video: Don't enable fallback path for
creating ACPI backlight by default"), the delayed registering of
acpi_video# backlight devices has been disabled by default.
The few bugreports where this option was used as a workaround were all
cases where the GPU driver did not call acpi_video_register_backlight()
and the workaround was to pass video.register_backlight_delay=1.
With the recent "ACPI: video: Make acpi_backlight=video work independent
from GPU driver" changes acpi_backlight=video can be used to achieve
the same result. So there is no need for the register_backlight_delay
option + code anymore.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Like the ASUS ExpertBook B2502CBA and various ASUS Vivobook laptops, the
ASUS ExpertBook B1502CBA has an ACPI DSDT table that describes IRQ 1 as
ActiveLow while the kernel overrides it to Edge_High.
$ sudo dmesg | grep DMI
DMI: ASUSTeK COMPUTER INC. ASUS EXPERTBOOK B1502CBA_B1502CBA/B1502CBA, BIOS B1502CBA.300 01/18/2023
$ grep -A 40 PS2K dsdt.dsl | grep IRQ -A 1
IRQ (Level, ActiveLow, Exclusive, )
{1}
This prevents the keyboard from working. To fix this issue, add this laptop
to the skip_override_table so that the kernel does not override IRQ 1.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217323
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Picasso was the first APU that introduced s2idle support from AMD,
and it was predating before vendors started to use `StorageD3Enable`
in their firmware.
Windows doesn't have problems with this hardware and NVME so it was
likely on the list of hardcoded CPUs to use this behavior in Windows.
Add it to the list for Linux to avoid NVME resume issues.
Reported-by: Stuart Axon <stuaxo2@yahoo.com>
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2449
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 0d5f467d6a0ba852ea3aad68663cbcbd43300fd4
ACPI_ALLOCATE_ZEROED may fails, object_info might be null and will cause
null pointer dereference later.
Link: https://github.com/acpica/acpica/commit/0d5f467d
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit bfdd3446e7caf795c85c70326c137023942972c5
Similar to "Replace one-element array with flexible-array", replace the
1-element array with a proper flexible array member as defined by C99.
This allows the code to operate without tripping compile-time and run-
time bounds checkers (e.g. via __builtin_object_size(), -fsanitize=bounds,
and/or -fstrict-flex-arrays=3). Note that the spec requires there be at
least one interrupt, so use a union to keep space allocated for this.
The only binary change in .text and .data sections is some rearrangement
by the compiler of acpi_dm_address_common(), but appears to be harmless.
Link: https://github.com/acpica/acpica/commit/bfdd3446
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit e66decc6fca36b59194b0947d87d6a9bec078bc3
Similar to "Replace one-element array with flexible-array", replace the
1-element array with a proper flexible array member as defined by C99.
This allows the code to operate without tripping compile-time and run-
time bounds checkers (e.g. via __builtin_object_size(), -fsanitize=bounds,
and/or -fstrict-flex-arrays=3).
Unlike struct acpi_nfit_flush_address and struct acpi_nfit_smbios, which
had their sizeof() uses adjusted in code, struct acpi_nfit_interleave did
not. This appears to have been a bug. After this change, there is a binary
difference in acpi_dm_dump_nfit() since the size of the structure now has
the correct size, as the prior result was including the trailing U32:
- mov $0x14,%ebp
+ mov $0x10,%ebp
Link: https://github.com/acpica/acpica/commit/e66decc6
Signed-off-by: Bob Moore <robert.moore@intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Tested-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 44f1af0664599e87bebc3a1260692baa27b2f264
Similar to "Replace one-element array with flexible-array", replace the
1-element array with a proper flexible array member as defined by C99.
This allows the code to operate without tripping compile-time and run-
time bounds checkers (e.g. via __builtin_object_size(), -fsanitize=bounds,
and/or -fstrict-flex-arrays=3).
The sizeof() uses with struct acpi_nfit_flush_address and struct
acpi_nfit_smbios have been adjusted to drop the open-coded subtraction
of the trailing single element. The result is no binary differences in
.text nor .data sections.
Link: https://github.com/acpica/acpica/commit/44f1af06
Signed-off-by: Bob Moore <robert.moore@intel.com>
Co-developed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 770653e3ba67c30a629ca7d12e352d83c2541b1e
Before this change we see the following UBSAN stack trace in Fuchsia:
#0 0x000021e4213b3302 in acpi_ds_init_aml_walk(struct acpi_walk_state*, union acpi_parse_object*, struct acpi_namespace_node*, u8*, u32, struct acpi_evaluate_info*, u8) ../../third_party/acpica/source/components/dispatcher/dswstate.c:682 <platform-bus-x86.so>+0x233302
#1.2 0x000020d0f660777f in ubsan_get_stack_trace() compiler-rt/lib/ubsan/ubsan_diag.cpp:41 <libclang_rt.asan.so>+0x3d77f
#1.1 0x000020d0f660777f in maybe_print_stack_trace() compiler-rt/lib/ubsan/ubsan_diag.cpp:51 <libclang_rt.asan.so>+0x3d77f
#1 0x000020d0f660777f in ~scoped_report() compiler-rt/lib/ubsan/ubsan_diag.cpp:387 <libclang_rt.asan.so>+0x3d77f
#2 0x000020d0f660b96d in handlepointer_overflow_impl() compiler-rt/lib/ubsan/ubsan_handlers.cpp:809 <libclang_rt.asan.so>+0x4196d
#3 0x000020d0f660b50d in compiler-rt/lib/ubsan/ubsan_handlers.cpp:815 <libclang_rt.asan.so>+0x4150d
#4 0x000021e4213b3302 in acpi_ds_init_aml_walk(struct acpi_walk_state*, union acpi_parse_object*, struct acpi_namespace_node*, u8*, u32, struct acpi_evaluate_info*, u8) ../../third_party/acpica/source/components/dispatcher/dswstate.c:682 <platform-bus-x86.so>+0x233302
#5 0x000021e4213e2369 in acpi_ds_call_control_method(struct acpi_thread_state*, struct acpi_walk_state*, union acpi_parse_object*) ../../third_party/acpica/source/components/dispatcher/dsmethod.c:605 <platform-bus-x86.so>+0x262369
#6 0x000021e421437fac in acpi_ps_parse_aml(struct acpi_walk_state*) ../../third_party/acpica/source/components/parser/psparse.c:550 <platform-bus-x86.so>+0x2b7fac
#7 0x000021e4214464d2 in acpi_ps_execute_method(struct acpi_evaluate_info*) ../../third_party/acpica/source/components/parser/psxface.c:244 <platform-bus-x86.so>+0x2c64d2
#8 0x000021e4213aa052 in acpi_ns_evaluate(struct acpi_evaluate_info*) ../../third_party/acpica/source/components/namespace/nseval.c:250 <platform-bus-x86.so>+0x22a052
#9 0x000021e421413dd8 in acpi_ns_init_one_device(acpi_handle, u32, void*, void**) ../../third_party/acpica/source/components/namespace/nsinit.c:735 <platform-bus-x86.so>+0x293dd8
#10 0x000021e421429e98 in acpi_ns_walk_namespace(acpi_object_type, acpi_handle, u32, u32, acpi_walk_callback, acpi_walk_callback, void*, void**) ../../third_party/acpica/source/components/namespace/nswalk.c:298 <platform-bus-x86.so>+0x2a9e98
#11 0x000021e4214131ac in acpi_ns_initialize_devices(u32) ../../third_party/acpica/source/components/namespace/nsinit.c:268 <platform-bus-x86.so>+0x2931ac
#12 0x000021e42147c40d in acpi_initialize_objects(u32) ../../third_party/acpica/source/components/utilities/utxfinit.c:304 <platform-bus-x86.so>+0x2fc40d
#13 0x000021e42126d603 in acpi::acpi_impl::initialize_acpi(acpi::acpi_impl*) ../../src/devices/board/lib/acpi/acpi-impl.cc:224 <platform-bus-x86.so>+0xed603
Add a simple check that avoids incrementing a pointer by zero, but
otherwise behaves as before. Note that our findings are against ACPICA
20221020, but the same code exists on master.
Link: https://github.com/acpica/acpica/commit/770653e3
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 661feab5ee01a34af95a389a18c82e79f1aba05a
Link: https://github.com/acpica/acpica/commit/661feab5
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 25bddd1824b1e450829468a64bbdcb38074ba3d2
Copyright updates to 2023.
Link: https://github.com/acpica/acpica/commit/25bddd18
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit d4a2c93198cdd9c6f4a83798345851fee96d5ca5
Also renames struct acpi_data_table_mapping's struct to
struct acpi_data_table_mapping, just so conversion goes smoothly.
Link: https://github.com/acpica/acpica/commit/d4a2c931
Signed-off-by: Pedro Falcato <pedro.falcato@gmail.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 2d85f3d30cdf9ceeb516e76bdc3c5c5d1d9b9fea
The following commit add function tracing macros for the namespace repiar
mechanism.
commit 87b8dba05b4cf8c111948327023c710e2b6b5a05
Add function trace macros to improve namespace debugging
But it missed the trace macro for the entry of ns_repair_HID(). Let's add
it.
Link: https://github.com/acpica/acpica/commit/2d85f3d3
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The Lenovo ThinkPad W530 uses a nvidia k1000m GPU. When this gets used
together with one of the older nvidia binary driver series (the latest
series does not support it), then backlight control does not work.
This is caused by commit 3dbc80a3e4 ("ACPI: video: Make backlight
class device registration a separate step (v2)") combined with
commit 5aa9d943e9 ("ACPI: video: Don't enable fallback path for
creating ACPI backlight by default").
After these changes the acpi_video# backlight device is only registered
when requested by a GPU driver calling acpi_video_register_backlight()
which the nvidia binary driver does not do.
I realize that using the nvidia binary driver is not a supported use-case
and users can workaround this by adding acpi_backlight=video on the kernel
commandline, but the ThinkPad W530 is a popular model under Linux users,
so it seems worthwhile to add a quirk for this.
I will also email Nvidia asking them to make the driver call
acpi_video_register_backlight() when an internal LCD panel is detected.
So maybe the next maintenance release of the drivers will fix this...
Fixes: 5aa9d943e9 ("ACPI: video: Don't enable fallback path for creating ACPI backlight by default")
Cc: All applicable <stable@vger.kernel.org>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
On the Apple iMac14,1 and iMac14,2 all-in-ones (monitors with builtin "PC")
the connection between the GPU and the panel is seen by the GPU driver as
regular DP instead of eDP, causing the GPU driver to never call
acpi_video_register_backlight().
(GPU drivers only call acpi_video_register_backlight() when an internal
panel is detected, to avoid non working acpi_video# devices getting
registered on desktops which unfortunately is a real issue.)
Fix the missing acpi_video# backlight device on these all-in-ones by
adding a acpi_backlight=video DMI quirk, so that video.ko will
immediately register the backlight device instead of waiting for
an acpi_video_register_backlight() call.
Fixes: 5aa9d943e9 ("ACPI: video: Don't enable fallback path for creating ACPI backlight by default")
Cc: All applicable <stable@vger.kernel.org>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Commit 3dbc80a3e4 ("ACPI: video: Make backlight class device
registration a separate step (v2)") combined with
commit 5aa9d943e9 ("ACPI: video: Don't enable fallback path for
creating ACPI backlight by default")
Means that the video.ko code now fully depends on the GPU driver calling
acpi_video_register_backlight() for the acpi_video# backlight class
devices to get registered.
This means that if the GPU driver does not do this, acpi_backlight=video
on the cmdline, or DMI quirks for selecting acpi_video# will not work.
This is a problem on for example Apple iMac14,1 all-in-ones where
the monitor's LCD panel shows up as a regular DP connection instead of
eDP so the GPU driver will not call acpi_video_register_backlight() [1].
Fix this by making video.ko directly register the acpi_video# devices
when these have been explicitly requested either on the cmdline or
through DMI quirks (rather then auto-detection being used).
[1] GPU drivers only call acpi_video_register_backlight() when an internal
panel is detected, to avoid non working acpi_video# devices getting
registered on desktops which unfortunately is a real issue.
Fixes: 5aa9d943e9 ("ACPI: video: Don't enable fallback path for creating ACPI backlight by default")
Cc: All applicable <stable@vger.kernel.org>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Allow callers of __acpi_video_get_backlight_type() to pass a pointer
to a bool which will get set to false if the backlight-type comes from
the cmdline or a DMI quirk and set to true if auto-detection was used.
And make __acpi_video_get_backlight_type() non static so that it can
be called directly outside of video_detect.c .
While at it turn the acpi_video_get_backlight_type() and
acpi_video_backlight_use_native() wrappers into static inline functions
in include/acpi/video.h, so that we need to export one less symbol.
Fixes: 5aa9d943e9 ("ACPI: video: Don't enable fallback path for creating ACPI backlight by default")
Cc: All applicable <stable@vger.kernel.org>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This helper does not produce a real modalias, but tries to get the
"product" compatible part of the "vendor,product" compatibles only. It
is far from creating a purely useful modalias string and does not seem
to be used like that directly anyway, so let's try to give this helper a
more meaningful name before moving there a real modalias helper (already
existing under of/device.c).
Also update the various documentations to refer to the strings as
"aliases" rather than "modaliases" which has a real meaning in the Linux
kernel.
There is no functional change.
Cc: Rafael J. Wysocki <rafael@kernel.org>
Cc: Len Brown <lenb@kernel.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Sebastian Reichel <sre@kernel.org>
Cc: Wolfram Sang <wsa@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Acked-by: Sebastian Reichel <sre@kernel.org>
Link: https://lore.kernel.org/r/20230404172148.82422-9-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We need the fixes in here for testing, as well as the driver core
changes for documentation updates to build on.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When setting up DMA for a PCI device, we need to initialize its
iommu_fwspec with all possible alias RIDs (such as PCI bridges). To do
this we use pci_for_each_dma_alias() which calls
viot_pci_dev_iommu_init(). This function incorrectly initializes the
fwspec of the bridge instead of the device being configured. Fix it by
passing the original device as context to pci_for_each_dma_alias().
Fixes: 3cf485540e ("ACPI: Add driver for the VIOT table")
Link: https://lore.kernel.org/all/Y8qzOKm6kvhGWG1T@myrica
Reported-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Modify the code in accordance with the coccicheck warning:
drivers/acpi/thermal.c:422: WARNING opportunity for min().
min_t() macro is defined in include/linux/minmax.h. It avoids multiple
evaluations of the arguments when non-constant and performs strict
type-checking.
Signed-off-by: Jiangshan Yi <yijiangshan@kylinos.cn>
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The "Smart Battery Selector" standard says that when writing
SelectorState (0x1), the nibbles which should not be modified
need to be masked with 0xff. This is necessary since in contrast
to a "Smart Battery Manager", the last three nibbles are writable.
Failing to do so might trigger the following cycle:
1. Host accidentally changes power source of the system (3rd nibble)
when selecting a battery.
2. Power source is invalid, Selector changes to another power source.
3. Selector notifies host that it changed the power source.
4. Host re-reads some batteries.
5. goto 1 for each re-read battery.
This loop might also be entered when a battery which is not present
is selected for SMBus access. In the end some workqueues fill up,
which causes the system to lockup upon suspend/shutdown.
Fix this by correctly masking the value to be written, and avoid
selecting batteries which are absent.
Tested on a Acer Travelmate 4002WLMi.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
When removing custom query handlers, the handler might still
be used inside the EC query workqueue, causing a kernel oops
if the module holding the callback function was already unloaded.
Fix this by flushing the EC query workqueue when removing
custom query handlers.
Tested on a Acer Travelmate 4002WLMi
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
According to the ACPI spec part 5.6.4.1.2, EC query handlers discovered
thru ACPI should not be removed when a driver removes his custom query
handler. On the Acer Travelmate 4002WLMi for example, such a query
handler is used as a fallback to handle the EC SMBus alert when no driver
is present.
Change acpi_ec_remove_query_handlers() so that only custom query
handlers are removed then remove_all is false. Query handlers discovered
thru ACPI will still get removed when remove_all is true, which happens
on device removal. Also add a simple check to ensure that
acpi_ec_add_query_handler() is always called with either handle or func
being set, since custom query handlers are detected based whether
handlers->func is set or not.
Tested on a Acer Travelmate 4002WLMi.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
[ rjw: Comment adjustment ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
1) Remove unnecessary blank lines.
2) Reformat one comment for consistency.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Refactor acpi_data_prop_read_single() for decreased indentation
and better structure. No functional changes intended.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
OSPM executes an EXECUTE_OPERATION action to instruct the platform to begin
the injection operation, then executes a GET_COMMAND_STATUS action to
determine the status of the completed operation. The ACPI Specification
documented error codes[1] are:
0 = Success (Linux #define EINJ_STATUS_SUCCESS)
1 = Unknown failure (Linux #define EINJ_STATUS_FAIL)
2 = Invalid Access (Linux #define EINJ_STATUS_INVAL)
The original code report -EBUSY for both "Unknown Failure" and "Invalid
Access" cases. Actually, firmware could do some platform dependent sanity
checks and returns different error codes, e.g. "Invalid Access" to indicate
to the user that the parameters they supplied cannot be used for injection.
To this end, fix to return -EINVAL in the __einj_error_inject() error
handling case instead of always -EBUSY, when explicitly indicated by the
platform in the status of the completed operation.
[1] ACPI Specification 6.5 18.6.1. Error Injection Table
Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The Confidential Computing Event Log (CCEL) table provides the address
and length of the CCEL records area in UEFI reserved memory.
To allow user space access to these records, expose a sysfs interface
similar to the BERT table.
More details about the CCEL table can be found in the ACPI specification
r6.5 [1], sec 5.2.34.
Link: https://uefi.org/specs/ACPI/6.5/05_ACPI_Software_Programming_Model.html#cc-event-log-acpi-table # [1]
Co-developed-by: Haibo Xu <haibo1.xu@intel.com>
Signed-off-by: Haibo Xu <haibo1.xu@intel.com>
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
For ACPI drivers that provide a ->notify() callback and set
ACPI_DRIVER_ALL_NOTIFY_EVENTS in their flags, that callback can be
invoked while either the ->add() or the ->remove() callback is running
without any synchronization at the bus type level which is counter to
the common-sense expectation that notification handling should only be
enabled when the driver is actually bound to the device. As a result,
if the driver is not careful enough, it's ->notify() callback may crash
when it is invoked too early or too late [1].
This issue has been amplified by commit d6fb6ee182 ("ACPI: bus: Drop
driver member of struct acpi_device") that made acpi_bus_notify() check
for the presence of the driver and its ->notify() callback directly
instead of using an extra driver pointer that was only set and cleared
by the bus type code, but it was present before that commit although
it was harder to reproduce then.
It can be addressed by using the observation that
acpi_device_install_notify_handler() can be modified to install the
handler for all types of events when ACPI_DRIVER_ALL_NOTIFY_EVENTS is
set in the driver flags, in which case acpi_bus_notify() will not need
to invoke the driver's ->notify() callback any more and that callback
will only be invoked after acpi_device_install_notify_handler() has run
and before acpi_device_remove_notify_handler() runs, which implies the
correct ordering with respect to the other ACPI driver callbacks.
Modify the code accordingly and while at it, drop two redundant local
variables from acpi_bus_notify() and turn its description comment into
a proper kerneldoc one.
Fixes: d6fb6ee182 ("ACPI: bus: Drop driver member of struct acpi_device")
Link: https://lore.kernel.org/linux-acpi/9f6cba7a8a57e5a687c934e8e406e28c.squirrel@mail.panix.com # [1]
Reported-by: Pierre Asselin <pa@panix.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Pierre Asselin <pa@panix.com>
- Restore the thermal core behavior regarding zero-temperature trip
points to avoid a driver regression (Ido Schimmel).
- Fix a recent regression in the ACPI processor driver preventing it
from changing the number of CPU cooling device states exposed via
sysfs after the given CPU cooling device has been registered (Rafael
Wysocki).
-----BEGIN PGP SIGNATURE-----
iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAmQd0OcSHHJqd0Byand5
c29ja2kubmV0AAoJEILEb/54YlRxf8IP/jE2m+iEGAHKCNeMqzBqv1Ug3YenB0+A
S4LSvlV3ATlQxJj1wBS4mEATQ2udpzGxUVzeG9evDTseqyv4bAjmfHgnfCVNF1Bc
itnNQKV2bGUCxTIpNsm4R9vbMMUBETkEtIe7xA+QFqfzcGFDjhJf2uBt1bXAsRWe
DaYK0AOdZHU8gEWrPA80G0nILQDb6Bk8IsA6kCfwKJO2mEqgyqTIhZQvKNkXGam9
bqhou2GwH4gxXVirUZQwYfvyRGVAGvv4ncHfVkRcXKqIsRsemdhnsPwJgkhkwG3y
KrJtXYPR1DbCo6YmgPfQej130Fhl6/gQ/ZTfYkbWQ3+VW5N+u//yJcnmohS0iZaa
oVDGj69qTctz7pWS8ZCLnHsAuUxCnZWhz7lYf3a7YolwpnYzGm+AbEjDCiBehjYy
cimqzjCW/r7ooq27RQ70fCBmlAMgaLdhvCy7B6oWZ4jzxJN+Oqn/V0FvxUClkccd
ef1WZo2Acg9hxL6OGxihpiUDiiF05sOH/TgDFwG7FaqW3qPVTX9Wz55K+d0Oanyx
7Ghtt091bun/qVRiAtZny5xVMbxXhnsVaayIhhCcEVlFQ7Yn4QM9RGIue7biyXgi
upf/pM5sfu3k3i3rR0ronvh83W7PZ2ofFQi8luUnO5adlbcVL8sfEce8kPanO7/V
RrvXUO8I3hLB
=aBq5
-----END PGP SIGNATURE-----
Merge tag 'thermal-6.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control fixes from Rafael Wysocki:
"These address two recent regressions related to thermal control.
Specifics:
- Restore the thermal core behavior regarding zero-temperature trip
points to avoid a driver regression (Ido Schimmel)
- Fix a recent regression in the ACPI processor driver preventing it
from changing the number of CPU cooling device states exposed via
sysfs after the given CPU cooling device has been registered
(Rafael Wysocki)"
* tag 'thermal-6.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: core: Restore behavior regarding invalid trip points
ACPI: processor: thermal: Update CPU cooling devices on cpufreq policy changes
thermal: core: Introduce thermal_cooling_device_update()
thermal: core: Introduce thermal_cooling_device_present()
ACPI: processor: Reorder acpi_processor_driver_init()
Add DMI info of the Medion S17413 (board M1xA) to the IRQ override
quirk table. This fixes the keyboard not working on these laptops.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=213031
Signed-off-by: Aymeric Wibo <obiwac@gmail.com>
[ rjw: Fixed up white space ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Direct access to the struct bus_type dev_root pointer is going away soon
so replace that with a call to bus_get_dev_root() instead, which is what
it is there for.
Cc: Len Brown <lenb@kernel.org>
Cc: linux-acpi@vger.kernel.org
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20230322083646.2937580-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The table values that are not defined in the specification are
considered non-fatal errors in the code.
However, they are firmware bugs, so point this out in the messages by
prefixing them with FW_BUG.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
In ACPI systems, the OS can direct power management, as opposed to the
firmware. This OS-directed Power Management is called OSPM. Part of
telling the firmware that the OS going to direct power management is
making ACPI "_PDC" (Processor Driver Capabilities) calls. These _PDC
methods must be evaluated for every processor object. If these _PDC
calls are not completed for every processor it can lead to
inconsistency and later failures in things like the CPU frequency
driver.
In a Xen system, the dom0 kernel is responsible for system-wide power
management. The dom0 kernel is in charge of OSPM. However, the
number of CPUs available to dom0 can be different than the number of
CPUs physically present on the system.
This leads to a problem: the dom0 kernel needs to evaluate _PDC for
all the processors, but it can't always see them.
In dom0 kernels, ignore the existing ACPI method for determining if a
processor is physically present because it might not be accurate.
Instead, ask the hypervisor for this information.
Fix this by introducing a custom function to use when running as Xen
dom0 in order to check whether a processor object matches a CPU that's
online. Such checking is done using the existing information fetched
by the Xen pCPU subsystem, extending it to also store the ACPI ID.
This ensures that _PDC method gets evaluated for all physically online
CPUs, regardless of the number of CPUs made available to dom0.
Fixes: 5d554a7bb0 ("ACPI: processor: add internal processor_physically_present()")
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
When a cpufreq policy appears or goes away, the CPU cooling devices for
the CPUs covered by that policy need to be updated so that the new
processor_get_max_state() value is stored as max_state and the
statistics in sysfs are rearranged for each of them.
Do that accordingly in acpi_thermal_cpufreq_init() and
acpi_thermal_cpufreq_exit().
Fixes: a365105c685c("thermal: sysfs: Reuse cdev->max_state")
Reported-by: Wang, Quanxian <quanxian.wang@intel.com>
Link: https://lore.kernel.org/linux-pm/53ec1f06f61c984100868926f282647e57ecfb2d.camel@intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
The cpufreq policy notifier in the ACPI processor driver may as
well be registered before the driver itself, which causes
acpi_processor_cpufreq_init to be true (unless the notifier
registration fails, which is unlikely at that point) when the
ACPI CPU thermal cooling devices are registered, so the
processor_get_max_state() result does not change while
acpi_processor_driver_init() is running.
Change the ordering in acpi_processor_driver_init() accordingly
to prevent the max_state value from remaining 0 permanently for all
ACPI CPU cooling devices due to setting acpi_processor_cpufreq_init
too late. [Note that processor_get_max_state() may still return
different values at different times after this change, depending on
the cpufreq driver registration time, but that issue needs to be
addressed separately.]
Fixes: a365105c685c("thermal: sysfs: Reuse cdev->max_state")
Reported-by: Wang, Quanxian <quanxian.wang@intel.com>
Link: https://lore.kernel.org/linux-pm/53ec1f06f61c984100868926f282647e57ecfb2d.camel@intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
The Acer Aspire 3830TG predates Windows 8, so it defaults to using
acpi_video# for backlight control, but this is non functional on
this model.
Add a DMI quirk to use the native backlight interface which does
work properly.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The acpi-cpufreq and pcc-cpufreq drivers are loaded through per-CPU
module aliases. This can result in many unnecessary load requests during
boot if another frequency module, such as intel_pstate, is already
active. For instance, on a typical Intel system, one can observe that
udev makes 2x#CPUs attempts to insert acpi_cpufreq and 1x#CPUs attempts
for pcc_cpufreq. All these tries then fail if another frequency module
is already registered.
In the worst case, without the recent fix in commit 0254127ab9
("module: Don't wait for GOING modules"), these module loads occupied
all udev workers and had their initialization attempts ran sequentially.
Resolving all these loads then on some larger machines took too long,
prevented other hardware from getting its drivers initialized and
resulted in a failed boot. Discussion over these duplicate module
requests ended up with a conclusion that only one load attempt should be
ideally made.
Both acpi-cpufreq and pcc-cpufreq drivers use platform firmware controls
which are defined by ACPI. It is possible to treat these interfaces as
platform devices.
The patch extends the ACPI parsing logic to check the ACPI namespace if
the PPC or PCC interface is present and creates a virtual platform
device for each if it is available. The acpi-cpufreq and pcc-cpufreq
drivers are then updated to map to these devices.
This allows to try loading acpi-cpufreq and pcc-cpufreq only once during
boot and only if a given interface is available in the firmware.
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
[ rjw: whitespace and error message log level adjustments, subject edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPI 6.5 added six new error types for CXL. See chapter 18
table 18.30.
Add strings for the new types so that Linux will list them in the
/sys/kernel/debug/apei/einj/available_error_types file.
It seems no other changes are needed. Linux already accepts
the CXL codes (on a BIOS that advertises them).
Signed-off-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
devm_kzalloc() may fail, clk_data->name might be NULL and will
cause a NULL pointer dereference later.
Signed-off-by: Kang Chen <void0red@gmail.com>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
For some AMD shared memory based systems, the autonomous selection bit
needed to be set explicitly. Add autonomous selection register related
APIs to acpi driver, which amd_pstate driver uses later.
Acked-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Wyes Karny <wyes.karny@amd.com>
[ rjw: Fixed up kerneldoc comments, white space adjustment, subject edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Currently writing of min and max perf register is deferred in
cppc_set_perf function. In CPPC guided mode, these registers needed to
be written to guide the platform about min and max perf levels. Add this support
to make guided mode work properly on AMD shared memory systems.
Acked-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Wyes Karny <wyes.karny@amd.com>
[ rjw: Fixed up a multiline comment, subject edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Merge a new ACPI backlight quirk, new ACPI quirks for I2C device
enumeration on some platforms, a pfrut utility fix and an ACPI
documentation fix for 6.3-rc3:
- Add backlight=native DMI quirk for Dell Vostro 15 3535 to the ACPI
video driver (Chia-Lin Kao).
- Add ACPI quirks for I2C devices enumeration on Lenovo Yoga Book X90
and Acer Iconia One 7 B1-750 (Hans de Goede).
- Fix handling of invalid command line option values in the ACPI pfrut
utility (Chen Yu).
- Fix references to I2C device data type in the ACPI documentation for
device enumeration (Andy Shevchenko).
* acpi-video:
ACPI: video: Add backlight=native DMI quirk for Dell Vostro 15 3535
* acpi-x86:
ACPI: x86: Add skip i2c clients quirk for Lenovo Yoga Book X90
ACPI: x86: Add skip i2c clients quirk for Acer Iconia One 7 B1-750
ACPI: x86: Introduce an acpi_quirk_skip_gpio_event_handlers() helper
* acpi-tools:
ACPI: tools: pfrut: Check if the input of level and type is in the right numeric range
* acpi-docs:
ACPI: docs: enumeration: Correct reference to the I²C device data type
Commit 0c80f9e165 ("ACPI: PPTT: Leave the table mapped for the runtime usage")
enabled to map PPTT once on the first invocation of acpi_get_pptt() and
never unmapped the same allowing it to be used at runtime with out the
hassle of mapping and unmapping the table. This was needed to fetch LLC
information from the PPTT in the cpuhotplug path which is executed in
the atomic context as the acpi_get_table() might sleep waiting for a
mutex.
However it missed to handle the case when there is no PPTT on the system
which results in acpi_get_pptt() being called from all the secondary
CPUs attempting to fetch the LLC information in the atomic context
without knowing the absence of PPTT resulting in the splat like below:
| BUG: sleeping function called from invalid context at kernel/locking/semaphore.c:164
| in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 0, name: swapper/1
| preempt_count: 1, expected: 0
| RCU nest depth: 0, expected: 0
| no locks held by swapper/1/0.
| irq event stamp: 0
| hardirqs last enabled at (0): 0x0
| hardirqs last disabled at (0): copy_process+0x61c/0x1b40
| softirqs last enabled at (0): copy_process+0x61c/0x1b40
| softirqs last disabled at (0): 0x0
| CPU: 1 PID: 0 Comm: swapper/1 Not tainted 6.3.0-rc1 #1
| Call trace:
| dump_backtrace+0xac/0x138
| show_stack+0x30/0x48
| dump_stack_lvl+0x60/0xb0
| dump_stack+0x18/0x28
| __might_resched+0x160/0x270
| __might_sleep+0x58/0xb0
| down_timeout+0x34/0x98
| acpi_os_wait_semaphore+0x7c/0xc0
| acpi_ut_acquire_mutex+0x58/0x108
| acpi_get_table+0x40/0xe8
| acpi_get_pptt+0x48/0xa0
| acpi_get_cache_info+0x38/0x140
| init_cache_level+0xf4/0x118
| detect_cache_attributes+0x2e4/0x640
| update_siblings_masks+0x3c/0x330
| store_cpu_topology+0x88/0xf0
| secondary_start_kernel+0xd0/0x168
| __secondary_switched+0xb8/0xc0
Update acpi_get_pptt() to consider the fact that PPTT is once checked and
is not available on the system and return NULL avoiding any attempts to
fetch PPTT and thereby avoiding any possible sleep waiting for a mutex
in the atomic context.
Fixes: 0c80f9e165 ("ACPI: PPTT: Leave the table mapped for the runtime usage")
Reported-by: Aishwarya TCV <aishwarya.tcv@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Tested-by: Pierre Gondois <pierre.gondois@arm.com>
Cc: 6.0+ <stable@vger.kernel.org> # 6.0+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The Lenovo Yoga Book X90 is a x86 tablet which ships with Android x86
as factory OS. The Android x86 kernel fork ignores I2C devices described
in the DSDT, except for the PMIC and Audio codecs.
As usual the Lenovo Yoga Book X90's DSDT contains a bunch of extra I2C
devices which are not actually there, causing various resource conflicts.
Add an ACPI_QUIRK_SKIP_I2C_CLIENTS quirk for the Lenovo Yoga Book X90
to the acpi_quirk_skip_dmi_ids table to woraround this.
The DSDT also contains broken ACPI GPIO event handlers, disable those too.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rjw@rjwysocki.net>
The Acer Iconia One 7 B1-750 is a x86 tablet which ships with Android x86
as factory OS. The Android x86 kernel fork ignores I2C devices described
in the DSDT, except for the PMIC and Audio codecs.
As usual the Acer Iconia One 7 B1-750's DSDT contains a bunch of extra I2C
devices which are not actually there, causing various resource conflicts.
Add an ACPI_QUIRK_SKIP_I2C_CLIENTS quirk for the Acer Iconia One 7 B1-750
to the acpi_quirk_skip_dmi_ids table to woraround this.
The DSDT also contains broken ACPI GPIO event handlers, disable those too.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rjw@rjwysocki.net>
x86 ACPI boards which ship with only Android as their factory image usually
have pretty broken ACPI tables, relying on everything being hardcoded in
the factory kernel image and often disabling parts of the ACPI enumeration
kernel code to avoid the broken tables causing issues.
Part of this broken ACPI code is that sometimes these boards have _AEI
ACPI GPIO event handlers which are broken.
So far this has been dealt with in the platform/x86/x86-android-tablets.c
module, which contains various workarounds for these devices, by it calling
acpi_gpiochip_free_interrupts() on gpiochip-s with troublesome handlers to
disable the handlers.
But in some cases this is too late, if the handlers are of the edge type
then gpiolib-acpi.c's code will already have run them at boot.
This can cause issues such as GPIOs ending up as owned by "ACPI:OpRegion",
making them unavailable for drivers which actually need them.
Boards with these broken ACPI tables are already listed in
drivers/acpi/x86/utils.c for e.g. acpi_quirk_skip_i2c_client_enumeration().
Extend the quirks mechanism for a new acpi_quirk_skip_gpio_event_handlers()
helper, this re-uses the DMI-ids rather then having to duplicate the same
DMI table in gpiolib-acpi.c .
Also add the new ACPI_QUIRK_SKIP_GPIO_EVENT_HANDLERS quirk to existing
boards with troublesome ACPI gpio event handlers, so that the current
acpi_gpiochip_free_interrupts() hack can be removed from
x86-android-tablets.c .
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Rafael J. Wysocki <rjw@rjwysocki.net>
Sometimes the system boots up with a acpi_video0 backlight interface
which doesn't work. So add Dell Vostro 15 3535 into the
video_detect_dmi_table to set it to native explicitly.
Signed-off-by: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Signed-off-by: Rafael J. Wysocki <rjw@rjwysocki.net>
In order to get the thermal zone id but without directly accessing the
thermal zone device structure, add an accessor.
Use the accessor in the hwmon_scmi and acpi_thermal.
No functional change intented.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The thermal zone device structure is exposed to the different drivers
and obviously they access the internals while that should be
restricted to the core thermal code.
In order to self-encapsulate the thermal core code, we need to prevent
the drivers accessing directly the thermal zone structure and provide
accessor functions to deal with.
Use the devdata accessor introduced in the previous patch.
No functional changes intended.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com> #mlxsw
Acked-by: Gregory Greenman <gregory.greenman@intel.com> #iwlwifi
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> #power_supply
Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> #ahci
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
- Add an ACPI IRQ override quirk for Asus Expertbook B2402FBA (Vojtech
Hejsek).
- Drop a suspend-to-idle quirk for HP Elitebook G9 that is not needed
any more after a firmware update (Mario Limonciello).
- Add all Cezanne systems to the list for forcing StorageD3Enable,
because they all need the same quirk (Mario Limonciello).
-----BEGIN PGP SIGNATURE-----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=D8xL
-----END PGP SIGNATURE-----
Merge tag 'acpi-6.3-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more ACPI updates from Rafael Wysocki:
"These update ACPI quirks for some x86 platforms and add an IRQ
override quirk for one more system.
Specifics:
- Add an ACPI IRQ override quirk for Asus Expertbook B2402FBA
(Vojtech Hejsek)
- Drop a suspend-to-idle quirk for HP Elitebook G9 that is not needed
any more after a firmware update (Mario Limonciello)
- Add all Cezanne systems to the list for forcing StorageD3Enable,
because they all need the same quirk (Mario Limonciello)"
* tag 'acpi-6.3-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: x86: utils: Add Cezanne to the list for forcing StorageD3Enable
ACPI: x86: Drop quirk for HP Elitebook
ACPI: resource: Skip IRQ override on Asus Expertbook B2402FBA
Merge additional ACPI quirks for x86 systems:
- Drop a suspend-to-idle quirk for HP Elitebook G9 that is not needed
any more after a firmware update (Mario Limonciello).
- Add all Cezanne systems to the list for forcing StorageD3Enable,
because they all need the same quirk (Mario Limonciello).
* acpi-pm:
ACPI: x86: Drop quirk for HP Elitebook
* acpi-x86:
ACPI: x86: utils: Add Cezanne to the list for forcing StorageD3Enable