We negotiate rsize mounts (and it can be overridden by user) to
typically 4MB, so using larger default I/O sizes from userspace
(changing to 1MB default i/o size returned by stat) the
performance is much better (and not just for long latency
network connections) in most use cases for SMB3 than the default I/O
size (which ends up being 128K for cp and can be even smaller for cp).
This can be 4x slower or worse depending on network latency.
By changing inode->blocksize from 32K (which was perhaps ok
for very old SMB1/CIFS) to a larger value, 1MB (but still less than
max size negotiated with the server which is 4MB, in order to minimize
risk) it significantly increases performance for the
noncached case, and slightly increases it for the cached case.
This can be changed by the user on mount (specifying bsize=
values from 16K to 16MB) to tune better for performance
for applications that depend on blocksize.
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
CC: Stable <stable@vger.kernel.org>
This patch aims to address writeback code problems related to error
paths. In particular it respects EINTR and related error codes and
stores and returns the first error occurred during writeback.
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Acked-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
If a request is cancelled, we can't assume that the server returns
1 credit back. Instead we need to wait for a response and process
the number of credits granted by the server.
Create a separate mid callback for cancelled request, parse the number
of credits in a response buffer and add them to the client's credits.
If the didn't get a response (no response buffer available) assume
0 credits granted. The latter most probably happens together with
session reconnect, so the client's credits are adjusted anyway.
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
After failing to reconnect to original target, it will retry any
target available from DFS cache.
Signed-off-by: Paulo Alcantara <palcantara@suse.de>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
This patch will make use of DFS cache routines where appropriate and
do not always request a new referral from server.
Signed-off-by: Paulo Alcantara <palcantara@suse.de>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
* Add new dfs_cache.[ch] files
* Add new /proc/fs/cifs/dfscache file
- dump current cache when read
- clear current cache when writing "0" to it
* Add delayed_work to periodically refresh cache entries
The new interface will be used for caching DFS referrals, as well as
supporting client target failover.
The DFS cache is a hashtable that maps UNC paths to cache entries.
A cache entry contains:
- the UNC path it is mapped on
- how much the the UNC path the entry consumes
- flags
- a Time-To-Live after which the entry expires
- a list of possible targets (linked lists of UNC paths)
- a "hint target" pointing the last known working target or the first
target if none were tried. This hint lets cifs.ko remember and try
working targets first.
* Looking for an entry in the cache is done with dfs_cache_find()
- if no valid entries are found, a DFS query is made, stored in the
cache and returned
- the full target list can be copied and returned to avoid race
conditions and looped on with the help with the
dfs_cache_tgt_iterator
* Updating the target hint to the next target is done with
dfs_cache_update_tgthint()
These functions have a dfs_cache_noreq_XXX() version that doesn't
fetches referrals if no entries are found. These versions don't
require the tcp/ses/tcon/cifs_sb parameters as a result.
Expired entries cannot be used and since they have a pretty short TTL
[1] in order for them to be useful for failover the DFS cache adds a
delayed work called periodically to keep them fresh.
Since we might not have available connections to issue the referral
request when refreshing we need to store volume_info structs with
credentials and other needed info to be able to connect to the right
server.
1: Windows defaults: 5mn for domain-based referrals, 30mn for regular
links
Signed-off-by: Paulo Alcantara <palcantara@suse.de>
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
This will be needed by DFS cache.
Signed-off-by: Paulo Alcantara <palcantara@suse.de>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Technically 3.02 is not the dialect name although that is more familiar to
many, so we should also accept the official dialect name (3.0.2 vs. 3.02)
in vers=
Signed-off-by: Kenneth D'souza <kdsouza@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
With direct I/O read, we transfer the data directly from transport layer to
the user data buffer.
Change in v3: add support for kernel AIO
Change in v4:
Refactor common read code to __cifs_readv for direct and non-direct I/O.
Retry on direct I/O failure.
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
In order to debug complex problems it is often helpful to
have detailed information on the client and server view
of the open file information. Add the ability for root to
view the list of smb3 open files and dump the persistent
handle and other info so that it can be more easily
correlated with server logs.
Sample output from "cat /proc/fs/cifs/open_files"
# Version:1
# Format:
# <tree id> <persistent fid> <flags> <count> <pid> <uid> <filename> <mid>
0x5 0x800000378 0x8000 1 7704 0 some-file 0x14
0xcb903c0c 0x84412e67 0x8000 1 7754 1001 rofile 0x1a6d
0xcb903c0c 0x9526b767 0x8000 1 7720 1000 file 0x1a5b
0xcb903c0c 0x9ce41a21 0x8000 1 7715 0 smallfile 0xd67
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
To allow better debugging (for example applications with
handle leaks, or complex reconnect scenarios) display the
number of open files (on the client) and number of open
server file handles for each tcon in /proc/fs/cifs/Stats.
Note that open files on server is one larger than local
due to handle caching (in this case of the root of
the share). In this example there are two local
open files, and three (two file and one directory handle)
open on the server.
Sample output:
$ cat /proc/fs/cifs/Stats
Resources in use
CIFS Session: 1
Share (unique mount targets): 2
SMB Request/Response Buffer: 1 Pool size: 5
SMB Small Req/Resp Buffer: 1 Pool size: 30
Operations (MIDs): 0
0 session 0 share reconnects
Total vfs operations: 36 maximum at one time: 2
1) \\localhost\test
SMBs: 69
Bytes read: 27 Bytes written: 0
Open files: 2 total (local), 3 open on server
TreeConnects: 1 total 0 failed
TreeDisconnects: 0 total 0 failed
Creates: 19 total 0 failed
Closes: 16 total 0 failed
...
Signed-off-by: Steve French <stfrench@microsoft.com>
We do not call cifs_open_file() for directories and thus we do not have a
pSMBFile we can extract the FIDs from.
Solve this by instead always using a compounded open/query/close for
the passthrough ioctl.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
This allows userspace tools to query the raw info levels for cifs files
and process the response in userspace.
In particular this is useful for many of those data where there is no
corresponding native data structure in linux.
For example querying the security descriptor for a file and extract the
SIDs.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
RHBZ 1484130
Update cifs_find_fid_lock_conflict() to recognize that
ODF locks do not conflict with eachother.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Modern servers often support 8MB as maximum i/o size, and we see some
performance benefits (my testing showed 1 to 13% on write paths,
and 1 to 3% on read paths for increasing the default to 4MB). If server
doesn't support larger i/o size, during negotiate protocol it is already
set correctly to the server's maximum if lower than 4MB.
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Each time we reconnect to the same server, bump an instance
counter (and display in /proc/fs/cifs/DebugData) to make it
easier to debug.
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
/proc/fs/cifs/Stats when CONFIG_CIFS_STATS2 is enabled logs 'slow'
responses, but depending on the server you are debugging a
one second timeout may be too fast, so allow setting it to
a larger number of seconds via new module parameter
/sys/module/cifs/parameters/slow_rsp_threshold
or via modprobe:
slow_rsp_threshold:Amount of time (in seconds) to wait before
logging that a response is delayed.
Default: 1 (if set to 0 disables msg). (uint)
Recommended values are 0 (disabled) to 32767 (9 hours) with
the default remaining as 1 second.
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
cifs_delete_mid() is called once we are finished handling a mid and we
expect no more work done on this mid.
Needed to fix recent commit:
commit 730928c8f4
("cifs: update smb2_queryfs() to use compounding")
Add a warning if someone tries to dequeue a mid that has already been
flagged to be deleted.
Also change list_del() to list_del_init() so that if we have similar bugs
resurface in the future we will not oops.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Paulo Alcantara <palcantara@suse.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
When CONFIG_CIFS_STATS2 is enabled keep counters for slow
commands (ie server took longer than 1 second to respond)
by SMB2/SMB3 command code. This can help in diagnosing
whether performance problems are on server (instead of
client) and which commands are causing the problem.
Sample output (the new lines contain words "slow responses ...")
$ cat /proc/fs/cifs/Stats
Resources in use
CIFS Session: 1
Share (unique mount targets): 2
SMB Request/Response Buffer: 1 Pool size: 5
SMB Small Req/Resp Buffer: 1 Pool size: 30
Total Large 10 Small 490 Allocations
Operations (MIDs): 0
0 session 0 share reconnects
Total vfs operations: 67 maximum at one time: 2
4 slow responses from localhost for command 5
1 slow responses from localhost for command 6
1 slow responses from localhost for command 14
1 slow responses from localhost for command 16
1) \\localhost\test
SMBs: 243
Bytes read: 1024000 Bytes written: 104857600
TreeConnects: 1 total 0 failed
TreeDisconnects: 0 total 0 failed
Creates: 40 total 0 failed
Closes: 39 total 0 failed
...
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
These are used for SMB3 encryption and compounded requests.
Update these functions and the other functions related to SMB3 encryption to
take an array of requests.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
CONFIG_CIFS_STATS should always be enabled as Pavel recently
noted. Simple statistics are not a significant performance hit,
and removing the ifdef simplifies the code slightly.
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Cc: <stable@vger.kernel.org>
These timers were a good idea but weren't used in current code,
and the idea was cifs specific. Future patch will add similar timers
for SMB2/SMB3, but no sense using memory for cifs timers that
aren't used in current code.
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
We really, really want to be encouraging use of secure dialects,
and SMB3.1.1 offers useful security features, and will soon
be the recommended dialect for many use cases. Simplify the code
by removing the CONFIG_CIFS_SMB311 ifdef so users don't disable
it in the build, and create compatibility and/or security issues
with modern servers - many of which have been supporting this
dialect for multiple years.
Also clarify some of the Kconfig text for cifs.ko about
SMB3.1.1 and current supported features in the module.
Signed-off-by: Steve French <stfrench@microsoft.com>
Acked-by: Aurelien Aptel <aaptel@suse.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
In cifs, the timestamps are stored in memory in the cifs_fattr structure,
which uses the deprecated 'timespec' structure. Now that the VFS code
has moved on to 'timespec64', the next step is to change over the fattr
as well.
This also makes 32-bit and 64-bit systems behave the same way, and
no longer overflow the 32-bit time_t in year 2038.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Paulo Alcantara <palcantara@suse.de>
Signed-off-by: Steve French <stfrench@microsoft.com>
With protocol version 2.0 mounts we have seen crashes with corrupt mid
entries. Either the server->pending_mid_q list becomes corrupt with a
cyclic reference in one element or a mid object fetched by the
demultiplexer thread becomes overwritten during use.
Code review identified a race between the demultiplexer thread and the
request issuing thread. The demultiplexer thread seems to be written
with the assumption that it is the sole user of the mid object until
it calls the mid callback which either wakes the issuer task or
deletes the mid.
This assumption is not true because the issuer task can be woken up
earlier by a signal. If the demultiplexer thread has proceeded as far
as setting the mid_state to MID_RESPONSE_RECEIVED then the issuer
thread will happily end up calling cifs_delete_mid while the
demultiplexer thread still is using the mid object.
Inserting a delay in the cifs demultiplexer thread widens the race
window and makes reproduction of the race very easy:
if (server->large_buf)
buf = server->bigbuf;
+ usleep_range(500, 4000);
server->lstrp = jiffies;
To resolve this I think the proper solution involves putting a
reference count on the mid object. This patch makes sure that the
demultiplexer thread holds a reference until it has finished
processing the transaction.
Cc: stable@vger.kernel.org
Signed-off-by: Lars Persson <larper@axis.com>
Acked-by: Paulo Alcantara <palcantara@suse.de>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Use a read lease for the cached root fid so that we can detect
when the content of the directory changes (via a break) at which time
we close the handle. On next access to the root the handle will be reopened
and cached again.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
cifs->master_tlink is NULL against Win Server 2016 (which is
strange.. not sure why) and is dereferenced in cifs_sb_master_tcon().
move master_tlink getter to cifsglob.h so it can be used from
smb2misc.c
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Acked-by: Pavel Shilovsky <pshilov@microsoft.com>
Add a function to allocate wdata without allocating pages for data
transfer. This gives the caller an option to pass a number of pages that
point to the data buffer to write to.
wdata is reponsible for free those pages after it's done.
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Add a function to allocate rdata without allocating pages for data
transfer. This gives the caller an option to pass a number of pages
that point to the data buffer.
rdata is still reponsible for free those pages after it's done.
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <smfrench@gmail.com>
If "posix" (or synonym "unix" for backward compatibility) specified on mount,
and server advertises support for SMB3.11 POSIX negotiate context, then
enable the new posix extensions on the tcon. This can be viewed by
looking for "posix" in the mount options displayed by /proc/mounts
for that mount (ie if posix extensions allowed by server and the
experimental POSIX extensions also requested on the mount by specifying
"posix" at mount time).
Also add check to warn user if conflicting unix/nounix or posix/noposix specified
on mount.
Signed-off-by: Steve French <smfrench@gmail.com>
Unlike CIFS where UNIX/POSIX extensions had been negotiatable,
SMB3 did not have POSIX extensions yet. Add the new SMB3.11
POSIX negotiate context to ask the server whether it can
support POSIX (and thus whether we can send the new POSIX open
context).
Signed-off-by: Steve French <smfrench@gmail.com>
To improve security it may be helpful to have additional ways to restrict the
ability to override the default dialects (SMB2.1, SMB3 and SMB3.02) on mount
with old dialects (CIFS/SMB1 and SMB2) since vers=1.0 (CIFS/SMB1) and vers=2.0
are weaker and less secure.
Add a module parameter "disable_legacy_dialects"
(/sys/module/cifs/parameters/disable_legacy_dialects) which can be set to
1 (or equivalently Y) to forbid use of vers=1.0 or vers=2.0 on mount.
Also cleans up a few build warnings about globals for various module parms.
Signed-off-by: Steve French <smfrench@gmail.com>
Note which ones of the module params are cifs dialect only
(N/A for default dialect now that has moved to SMB2.1 or later)
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
When direct I/O is used, the data buffer may not always align to page
boundaries. Introduce a page offset in transport data structures to
describe the location of the buffer within the page.
Also change the function to pass the page offset when sending data to
transport.
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
In SMB2_open(), if we got a lease we need to store this in the fid structure
or else we will never be able to map a lease break back to which file/fid
it applies to.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <smfrench@gmail.com>
and change the smb2 version to take heder_preamble_size into account
instead of hardcoding it as 4 bytes.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
We need a struct TCP_Server_Info *server to this method as it calls
calc_size. The calc_size method will soon be changed to also
take a server argument.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
In SMB2/SMB3 unlike in cifs we unnecessarily open the root of the share
over and over again in various places during mount and path revalidation
and also in statfs. This patch cuts redundant traffic (opens and closes)
by simply keeping the directory handle for the root around (and reopening
it as needed on reconnect), so query calls don't require three round
trips to copmlete - just one, and eases load on network, client and
server (on mount alone, cuts network traffic by more than a third).
Also add a new cifs mount parm "nohandlecache" to allow users whose
servers might have resource constraints (eg in case they have a server
with so many users connecting to it that this extra handle per mount
could possibly be a resource concern).
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
and get rid of some more calls to get_rfc1002_length()
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
and get rid of some get_rfc1002_length() in smb2
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
SMB3.11 crypto and hash contexts were not being checked strictly enough.
Add parsing and validity checking for the security contexts in the SMB3.11
negotiate response.
Signed-off-by: Steve French <smfrench@gmail.com>
CC: Stable <stable@vger.kernel.org>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Some servers return inode number zero for the root directory, which
causes ls to display incorrect data (missing "." and "..").
If the server returns zero for the inode number of the root directory,
fake an inode number for it.
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
CC: Stable <stable@vger.kernel.org>