The MPTCP socket's write_seq member should be read with READ_ONCE() when
the msk lock is not held.
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Bare TCP ack skbs are freed right after MPTCP sees them, so the work to
allocate, zero, and populate the MPTCP skb extension is wasted. Detect
these skbs and do not add skb extensions to them.
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The MPTCP state machine handles disconnections on non-fallback connections,
but the mptcp_sock still needs to get notified when fallback subflows
disconnect.
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
RFC 8684 appendix D describes the connection state machine for
MPTCP. This patch implements the DATA_FIN / DATA_ACK exchanges and
MPTCP-level socket state changes described in that appendix, rather than
simply sending DATA_FIN along with TCP FIN when disconnecting subflows.
DATA_FIN is now sent and acknowledged before shutting down the
subflows. Received DATA_FIN information (if not part of a data packet)
is written to the MPTCP socket when the incoming DSS option is parsed by
the subflow, and the MPTCP worker is scheduled to process the
flag. DATA_FIN received as part of a full DSS mapping will be handled
when the mapping is processed.
The DATA_FIN is acknowledged by the worker if the reader is caught
up. If there is still data to be moved to the MPTCP-level queue, ack_seq
will be incremented to account for the DATA_FIN when it reaches the end
of the stream and a DATA_ACK will be sent to the peer.
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
After DATA_FIN has been sent, the peer will acknowledge it. An ack of
the relevant MPTCP-level sequence number will update the MPTCP
connection state appropriately.
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This will be used to transition to the appropriate state on close and
determine if a DATA_FIN needs to be sent for that state transition.
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Incoming DATA_FIN headers need to propagate the presence of the DATA_FIN
bit and the associated sequence number to the MPTCP layer, even when
arriving on a bare ACK that does not get added to the receive queue. Add
structure members to store the DATA_FIN information and helpers to set
and check those values.
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since DATA_FIN information is the same for every subflow, store it only
in the mptcp_sock.
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
mptcp_close() acquires the msk lock, so it clearly should not be held
before the function is called.
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A MPTCP socket where sending has been shut down should not attempt to
send additional data, since DATA_FIN has already been sent.
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
RFC 8684-compliant DATA_FIN needs to be sent and ack'd before subflows
are closed with TCP FIN, so write DATA_FIN DSS headers whenever their
transmission has been enabled by the MPTCP connection-level socket.
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Christoph Hellwig says:
====================
sockptr_t fixes v2
a bunch of fixes for the sockptr_t conversion
Changes since v1:
- fix a user pointer dereference braino in bpfilter
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Make sure not just the pointer itself but the whole range lies in
the user address space. For that pass the length and then use
the access_ok helper to do the check.
Fixes: 6d04fe15f7 ("net: optimize the sockptr_t for unified kernel/user address spaces")
Reported-by: David Laight <David.Laight@ACULAB.COM>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
sockptr_advance never properly worked. Replace it with _offset variants
of copy_from_sockptr and copy_to_sockptr.
Fixes: ba423fdaa5 ("net: add a new sockptr_t type")
Reported-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reported-by: Ido Schimmel <idosch@idosch.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jason A. Donenfeld <Jason@zx2c4.com>
Tested-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
While the kernel in general is not strict aliasing safe we can trivially
do that in sockptr_is_null without affecting code generation, so always
check the actually assigned union member.
Reported-by: Jan Engelhardt <jengelh@inai.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
This was accidentally removed in an unrelated commit.
Fixes: c2f12630c6 ("netfilter: switch nf_setsockopt to sockptr_t")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel says:
====================
mlxsw: Add support for QSFP-DD transceiver type
This patch set from Vadim adds support for Quad Small Form Factor
Pluggable Double Density (QSFP-DD) modules in mlxsw.
Patch #1 enables dumping of QSFP-DD module information through ethtool.
Patch #2 enables reading of temperature thresholds from QSFP-DD modules
for hwmon and thermal zone purposes.
Changes since v1 [1]:
Only rebase on top of net-next. After discussing with Andrew and Adrian
we agreed that current approach is OK and that in the future we can
follow Andrew's suggestion to "make a new API where user space can
request any pages it want, and specify the size of the page". This
should allow us "to work around known issues when manufactures get their
EEPROM wrong".
[1] https://lore.kernel.org/netdev/20200626144724.224372-1-idosch@idosch.org/#t
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Allow QSFP-DD transceivers temperature thresholds reading for hardware
monitoring and thermal control.
For this type, the thresholds are located in page 02h according to the
"Module and Lane Thresholds" description from Common Management
Interface Specification.
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The Quad Small Form Factor Pluggable Double Density (QSFP-DD) hardware
specification defines a form factor that supports up to 400 Gbps in
aggregate over an 8x50-Gbps electrical interface. The QSFP-DD supports
both optical and copper interfaces.
Implementation is based on Common Management Interface Specification;
Rev 4.0 May 8, 2019. Table 8-2 "Identifier and Status Summary (Lower
Page)" from this spec defines "Id and Status" fields located at offsets
00h - 02h. Bit 2 at offset 02h ("Flat_mem") specifies QSFP EEPROM memory
mode, which could be "upper memory flat" or "paged". Flat memory mode is
coded "1", and indicates that only page 00h is implemented in EEPROM.
Paged memory is coded "0" and indicates that pages 00h, 01h, 02h, 10h
and 11h are implemented. Pages 10h and 11h are currently not supported
by the driver.
"Flat" memory mode is used for the passive copper transceivers. For this
type only page 00h (256 bytes) is available. "Paged" memory is used for
the optical transceivers. For this type pages 00h (256 bytes), 01h (128
bytes) and 02h (128 bytes) are available. Upper page 01h contains static
advertising field, while upper page 02h contains the module-defined
thresholds and lane-specific monitors.
Extend enumerator 'mlxsw_reg_mcia_eeprom_module_info_id' with additional
field 'MLXSW_REG_MCIA_EEPROM_MODULE_INFO_TYPE_ID'. This field is used to
indicate for QSFP-DD transceiver type which memory mode is to be used.
Expose 256 bytes buffer for QSFP-DD passive copper transceiver and
512 bytes buffer for optical.
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Misc and small update to mlx5 driver:
1) Aya adds PCIe relaxed ordering support for mlx5 netdev queues.
2) Eran Refactors pages data base to be per vf/function to speedup
unload time.
3) Parav changes eswitch steering initialization to account for
tota_vports rather than for only active vports and
Link non uplink representors to PCI device, for uniform naming scheme.
4) Tariq, trivial RX code improvements and missing inidirect calls
wrappers.
5) Small cleanup patches
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGhZs6bAKwk/OTgTpSD+KveBX+j4FAl8f8fgACgkQSD+KveBX
+j5pgggAtjGZ3dWt43WNIMEYum/OZYrIhAVIaB4IgPY2Q90i26A7VMpBUOpQxTzk
Z+PYiSuiwplWeQ0k9GW2yMCAEACsuiSQXQG/eUA4jKRKf9hQEXi5guuVEIYJRm68
uL4aI4m4Aygx/n2UTdajARB69RVZ02ZhoNucMGETw4gzvqLdSgVCyR2tiDnPiKKW
3+y9nViglik7XqvDrYT9H+7vo8geCg5zBWEABy/Ls0VUCWN2xCjPNbGL9VCMG8Q+
A6n5SdhaOMIc9u5vkcE4CVgOnUPwNPQeu+GVgEodZ7GhFwX897A8dvFwljfML/UU
rBRPgC2kUTtGDZxVcSBMlBjrXl6zMQ==
=iwh/
-----END PGP SIGNATURE-----
Merge tag 'mlx5-updates-2020-07-28' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5-updates-2020-07-28
Misc and small update to mlx5 driver:
1) Aya adds PCIe relaxed ordering support for mlx5 netdev queues.
2) Eran Refactors pages data base to be per vf/function to speedup
unload time.
3) Parav changes eswitch steering initialization to account for
tota_vports rather than for only active vports and
Link non uplink representors to PCI device, for uniform naming scheme.
4) Tariq, trivial RX code improvements and missing inidirect calls
wrappers.
5) Small cleanup patches
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The .suspend() and .resume() callbacks are not defined for this driver.
Still, their power management structure follows the legacy framework. To
bring it under the generic framework, simply remove the binding of
callbacks from "struct pci_driver".
Change code indentation from space to tab in "struct pci_driver".
Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
list_for_each_entry is able to handle an empty list.
The only effect of avoiding the loop is not initializing the
index variable.
Drop list_empty tests in cases where these variables are not
used.
Note that list_for_each_entry is defined in terms of list_first_entry,
which indicates that it should not be used on an empty list. But in
list_for_each_entry, the element obtained by list_first_entry is not
really accessed, only the address of its list_head field is compared
to the address of the list head, so the list_first_entry is safe.
The semantic patch that makes this change is as follows (with another
variant for the no brace case): (http://coccinelle.lip6.fr/)
<smpl>
@@
expression x,e;
iterator name list_for_each_entry;
statement S;
identifier i;
@@
-if (!(list_empty(x))) {
list_for_each_entry(i,x,...) S
- }
... when != i
? i = e
</smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
There is no need to print on each unsuccessful matcher
ip_version combination since it probably will happen when
trying to create all the possible combinations.
On a real failure we have a print in the calling function.
Signed-off-by: Alex Vesker <valex@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
The concept of Relaxed Ordering in the PCI Express environment allows
switches in the path between the Requester and Completer to reorder some
transactions just received before others that were previously enqueued.
In ETH driver, there is no question of write integrity since each memory
segment is written only once per cycle. In addition, the driver doesn't
access the memory shared with the hardware until the corresponding CQE
arrives indicating all PCI transactions are done.
Running TCP single stream over ConnectX-4 LX, ARM CPU on remote-numa has
300% improvement in the bandwidth.
With relaxed ordering turned off: BW:10 [GB/s]
With relaxed ordering turned on: BW:40 [GB/s]
The driver turns relaxed ordering with respect to the firmware
capabilities and the return value from pcie_relaxed_ordering_enabled().
Signed-off-by: Aya Levin <ayal@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Use the indirect call wrapper API macros for declaration and scope
of the RX post WQEs functions.
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Instead of exposing the RQ datapath handlers (from en_rx.c) so that
they are set in the control path (in en_main.c), wrap this logic
in a single function in en_rx.c and expose it alone.
Every profile will now have a pointer to the new mlx5e_rx_handlers
structure, instead of directly pointing to the previously-exposed
RQ handlers.
This significantly improves locality and modularity of the driver,
and allows many functions in en_rx.c to become static.
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Currently PF and VF representors are exposed as virtual device.
They are not linked to its parent PCI device like how uplink
representor is linked.
Due to this, PF and VF representors cannot benefit of the
systemd defined naming scheme. This requires special handling
by the users.
Hence, link the PF and VF representors to their parent PCI device
similar to existing uplink representor netdevice.
Example:
udevadm output before linking to PCI device:
$ udevadm test-builtin net_id /sys/class/net/eth6
Load module index
Network interface NamePolicy= disabled on kernel command line, ignoring.
Parsed configuration file /usr/lib/systemd/network/99-default.link
Created link configuration context.
Using default interface naming scheme 'v243'.
ID_NET_NAMING_SCHEME=v243
Unload module index
Unloaded link configuration context.
udevadm output after linking to PCI device:
$ udevadm test-builtin net_id /sys/class/net/eth6
Load module index
Network interface NamePolicy= disabled on kernel command line, ignoring.
Parsed configuration file /usr/lib/systemd/network/99-default.link
Created link configuration context.
Using default interface naming scheme 'v243'.
ID_NET_NAMING_SCHEME=v243
ID_NET_NAME_PATH=enp0s8f0npf0vf0
Unload module index
Unloaded link configuration context.
In past there was little concern over seeing 10,000 lines output
showing up at thread [1] is not applicable as ndo ops for VF
handling is not exposed for all the 100 repesentors for mlx5 devices.
Additionally alternative device naming [2] to overcome shorter device
naming is also part of the latest systemd release v245.
[1] https://marc.info/?l=linux-netdev&m=152657949117904&w=2
[2] https://lwn.net/Articles/814068/
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Currently steering table and rx group initialization helper
routines works on the total_vports passed as input parameter.
Both eswitch helpers work on the mlx5_eswitch and thereby have access
to esw->total_vports. Hence use it directly instead of passing it
via function input arguments.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Bodong Wang <bodong@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Total e-switch vports are already stored in mlx5_eswitch total_vports.
Avoid copy of it in nvports and reuse existing total_vports calculation.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Bodong Wang <bodong@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
When eswitch is enabled, VFs might not be enabled. Hence, consider
maximum number of VFs.
This further closes the gap between handling VF vports between ECPF and
PF.
Fixes: ea2128fd63 ("net/mlx5: E-switch, Reduce dependency on num_vfs during mode set")
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Bodong Wang <bodong@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Add function ID to reclaim pages debug log for better user visibility.
Signed-off-by: Avihu Hagag <avihuh@mellanox.com>
Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Per page request event, FW request to allocated or release pages for a
single function. Driver maintains FW pages object per function, so there
is no need to hold one global page data-base. Instead, have a page
data-base per function, which will improve performance release flow in all
cases, especially for "release all pages".
As the range of function IDs is large and not sequential, use xarray to
store a per function ID page data-base, where the function ID is the key.
Upon first allocation of a page to a function ID, create the page
data-base per function. This data-base will be released only at pagealloc
mechanism cleanup.
NIC: ConnectX-4 Lx
CPU: Intel(R) Xeon(R) CPU E5-2650 v2 @ 2.60GHz
Test case: 32 VFs, measure release pages on one VF as part of FLR
Before: 0.021 Sec
After: 0.014 Sec
The improvement depends on amount of VFs and memory utilization
by them. Time measurements above were taken from idle system.
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Tony Nguyen says:
====================
1GbE Intel Wired LAN Driver Updates 2020-07-27
This series contains updates to igc driver only.
Sasha cleans up double definitions, unneeded and non applicable
registers, and removes unused fields in structs. Ensures the Receive
Descriptor Minimum Threshold Count is cleared and fixes a static checker
error.
v2: Remove fields from hw_stats in patches that removed their uses.
Reworded patch descriptions for patches 1, 2, and 4.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently n_rq_elems is being assigned to params.elem_size instead of the
field params.num_elems. Coverity is detecting this as a double assingment
to params.elem_size and reporting this as an usused value on the first
assignment. Fix this.
Addresses-Coverity: ("Unused value")
Fixes: b6db3f71c9 ("qed: simplify chain allocation with init params struct")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Edward Cree says:
====================
sfc: driver for EF100 family NICs, part 1
EF100 is a new NIC architecture under development at Xilinx, based
partly on existing Solarflare technology. As many of the hardware
interfaces resemble EF10, support is implemented within the 'sfc'
driver, which previous patch series "commonised" for this purpose.
In order to maintain bisectability while splitting into patches of a
reasonable size, I had to do a certain amount of back-and-forth with
stubs for things that the common code may try to call, mainly because
we can't do them until we've set up MCDI, but we can't set up MCDI
without probing the event queues, at which point a lot of the common
machinery becomes reachable from event handlers.
Consequently, this first series doesn't get as far as actually sending
and receiving packets. I have a second series ready to follow it
which implements the datapath (and a few other things like ethtool).
Changes from v4:
* Fix build on CONFIG_RETPOLINE=n by using plain prototypes instead
of INDIRECT_CALLABLE_DECLARE.
Changes from v3:
* combine both drivers (sfc_ef100 and sfc) into a single module, to
make non-modular builds work. Patch #4 now adds a few indirections
to support this; the ones in the RX and TX path use indirect-call-
wrappers to minimise the performance impact.
Changes from v2:
* remove MODULE_VERSION.
* call efx_destroy_reset_workqueue() from ef100_exit_module().
* correct uint32_ts to u32s. While I was at it, I fixed a bunch of
other style issues in the function-control-window code.
All in patch #4.
Changes from v1:
* kernel test robot spotted a link error when sfc_ef100 was built
without mdio. It turns out the thing we were trying to link to
was a bogus thing to do on anything but Falcon, so new patch #1
removes it from this driver.
* fix undeclared symbols in patch #4 by shuffling around prototypes
and #includes and adding 'static' where appropriate.
* fix uninitialised variable 'rc2' in patch #7.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
In ef100_reset(), make the MCDI call to do the reset.
Also, do a reset at start-of-day during probe, to put the function in
a clean state.
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
MC_CMD_GET_CAPABILITIES now has a third word of flags; extend the
efx_has_cap() machinery to cover it.
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently RX and TX-completion events are unhandled, as neither the RX
nor the TX path has been implemented yet.
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Channels are probed, but actual event handling is still stubbed out.
Stub implementation of check_caps is needed because ptp.c will call into
it from efx_ptp_use_mac_tx_timestamps() to decide if it wants TXQs.
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We handle everything ourselves in ef100_reset(), rather than relying on
the generic down/up routines.
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We can't actually do the MCDI to probe it fully until we have working
MCDI, which comes later, but we need efx->phy_data to be allocated so
that when we get MCDI events the link-state change handler doesn't
NULL-dereference.
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We don't actually do the efx_mcdi_reset() because we don't have MCDI yet.
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
