Commit Graph

2450 Commits

Author SHA1 Message Date
Alex Elder 00f1f36ffa rbd: do some refactoring
A few blocks of code are rearranged a bit here:
    - In rbd_header_from_disk():
	- Don't bother computing snap_count until we're sure the
	  on-disk header starts with a good signature.
	- Move a few independent lines of code so they are *after* a
	  check for a failed memory allocation.
	- Get rid of unnecessary local variable "ret".
    - Make a few other changes in rbd_read_header(), similar to the
      above--just moving things around a bit while preserving the
      functionality.
    - In rbd_rq_fn(), just assign rq in the while loop's controlling
      expression rather than duplicating it before and at the end of
      the loop body.  This allows the use of "continue" rather than
      "goto next" in a number of spots.
    - Rearrange the logic in snap_by_name().  End result is the same.

Signed-off-by: Alex Elder <elder@dreamhost.com>
2012-03-22 10:47:50 -05:00
Alex Elder fed4c143ba rbd: fix module sysfs setup/teardown code
Once rbd_bus_type is registered, it allows an "add" operation via
the /sys/bus/rbd/add bus attribute, and adding a new rbd device that
way establishes a connection between the device and rbd_root_dev.
But rbd_root_dev is not registered until after the rbd_bus_type
registration is complete.  This could (in principle anyway) result
in an invalid state.

Since rbd_root_dev has no tie to rbd_bus_type we can reorder these
two initializations and never be faced with this scenario.

In addition, unregister the device in the event the bus registration
fails at module init time.

Signed-off-by: Alex Elder <elder@dreamhost.com>
Signed-off-by: Sage Weil <sage@newdream.net>
2012-03-22 10:47:50 -05:00
Alex Elder 7ef3214af2 rbd: don't allocate mon_addrs buffer in rbd_add()
The mon_addrs buffer in rbd_add is used to hold a copy of the
monitor IP addresses supplied via /sys/bus/rbd/add.  That is
passed to rbd_get_client(), which never modifies it (nor do
any of the functions it gets passed to thereafter)--the mon_addr
parameter to rbd_get_client() is a pointer to constant data, so it
can't be modifed.  Furthermore, rbd_get_client() has the length of
the mon_addrs buffer and that is used to ensure nothing goes beyond
its end.

Based on all this, there is no reason that a buffer needs to
be used to hold a copy of the mon_addrs provided via
/sys/bus/rbd/add.   Instead, the location within that passed-in
buffer can be provided, along with the length of the "token"
therein which represents the monitor IP's.

A small change to rbd_add_parse_args() allows the address within the
buffer to be passed back, and the length is already returned.  This
now means that, at least from the perspective of this interface,
there is no such thing as a list of monitor addresses that is too
long.

Signed-off-by: Alex Elder <elder@dreamhost.com>
2012-03-22 10:47:50 -05:00
Alex Elder 5214ecc45c rbd: have rbd_parse_args() report found mon_addrs size
The argument parsing routine already computes the size of the
mon_addrs buffer it extracts from the "command."  Pass it to the
caller so it can use it to provide the length to rbd_get_client().

Signed-off-by: Alex Elder <elder@dreamhost.com>
2012-03-22 10:47:49 -05:00
Alex Elder 81a8979378 rbd: do a few checks at build time
This is a bit gratuitous, but there are a few things that can be
verified at build time rather than run time, so do that.

Signed-off-by: Alex Elder <elder@dreamhost.com>
2012-03-22 10:47:49 -05:00
Alex Elder e28fff268e rbd: don't use sscanf() in rbd_add_parse_args()
Make use of a few simple helper routines to parse the arguments
rather than sscanf().  This will treat both missing and too-long
arguments as invalid input (rather than silently truncating the
input in the too-long case).  In time this can also be used by
rbd_add() to use the passed-in buffer in place, rather than copying
its contents into new buffers.

It appears to me that the sscanf() previously used would not
correctly handle a supplied snapshot--the two final "%s" conversion
specifications were not separated by a space, and I'm not sure
how sscanf() handles that situation.  It may not be well-defined.
So that may be a bug this change fixes (but I didn't verify that).

The sizes of the mon_addrs and options buffers are now passed to
rbd_add_parse_args(), so they can be supplied to copy_token().

Signed-off-by: Alex Elder <elder@dreamhost.com>
2012-03-22 10:47:49 -05:00
Alex Elder a725f65e52 rbd: encapsulate argument parsing for rbd_add()
Move the code that parses the arguments provided to rbd_add() (which
are supplied via /sys/bus/rbd/add) into a separate function.

Also rename the "mon_dev_name" variable in rbd_add() to be
"mon_addrs".   The variable represents a list of one or more
comma-separated monitor IP addresses, each with an optional port
number.  I think "mon_addrs" captures that notion a little better.

Signed-off-by: Alex Elder <elder@dreamhost.com>
2012-03-22 10:47:48 -05:00
Alex Elder 27cc25943f rbd: simplify error handling in rbd_add()
If a couple pointers are initialized to NULL then a single
"out_nomem" label can be used for all of the memory allocation
failure cases in rbd_add().

Also, get rid of the "irc" local variable there.  There is no
real need for "rc" to be type ssize_t, and it can be used in
the spot "irc" was.

Signed-off-by: Alex Elder <elder@dreamhost.com>
Signed-off-by: Sage Weil <sage@newdream.net>
2012-03-22 10:47:48 -05:00
Alex Elder 60571c7d55 rbd: reduce memory used for rbd_dev fields
The length of the string containing the monitor address
specification(s) will never exceed the length of the string passed
in to rbd_add().  The same holds true for the ceph + rbd options
string.  So reduce the amount of memory allocated for these to
that length rather than the maximum (1024 bytes).

Signed-off-by: Alex Elder <elder@dreamhost.com>
Signed-off-by: Sage Weil <sage@newdream.net>
2012-03-22 10:47:48 -05:00
Alex Elder d720bcb0a8 rbd: have rbd_get_client() return a rbd_client
Since rbd_get_client() currently returns an error code.  It assigns
the rbd_client field of the rbd_device structure it is passed if
successful.  Instead, have it return the created rbd_client
structure and return a pointer-coded error if there is an error.
This makes the assignment of the client pointer more obvious at the
call site.

Signed-off-by: Alex Elder <elder@dreamhost.com>
Signed-off-by: Sage Weil <sage@newdream.net>
2012-03-22 10:47:48 -05:00
Alex Elder f0f8cef5a3 rbd: a few simple changes
Here are a few very simple cleanups:
    - Add a "RBD_" prefix to the two driver name string definitions.
    - Move the definition of struct rbd_request below struct rbd_req_coll
      to avoid the need for an empty declaration of the latter.
    - Move and group the definitions of rbd_root_dev_release() and
      rbd_root_dev, as well as rbd_bus_type and rbd_bus_attrs[],
      close to the top of the file.  Arrange the latter so
      rbd_bus_type.bus_attrs can be initialized statically.
    - Get rid of an unnecessary local variable in rbd_open().
    - Rework some hokey logic in rbd_bus_add_dev(), so the value of
      "ret" at the end is either 0 or -ENOENT to avoid the need for
      the code duplication that was there.
    - Rename a goto target in rbd_add().

Signed-off-by: Alex Elder <elder@dreamhost.com>
Signed-off-by: Sage Weil <sage@newdream.net>
2012-03-22 10:47:48 -05:00
Alex Elder 432b858749 rbd: rename "node_lock"
The spinlock used to protect rbd_client_list is named "node_lock".
Rename it to "rbd_client_list_lock" to make it more obvious what
it's for.

Signed-off-by: Alex Elder <elder@dreamhost.com>
Signed-off-by: Sage Weil <sage@newdream.net>
2012-03-22 10:47:48 -05:00
Alex Elder bc534d86be rbd: move ctl_mutex lock inside rbd_client_create()
Since rbd_client_create() is only called in one place, move the
acquisition of the mutex around that call inside that function.

Signed-off-by: Alex Elder <elder@dreamhost.com>
Signed-off-by: Sage Weil <sage@newdream.net>
2012-03-22 10:47:47 -05:00
Alex Elder d97081b0c7 rbd: move ctl_mutex lock inside rbd_get_client()
Since rbd_get_client() is only called in one place, move the
acquisition of the mutex around that call inside that function.

Furthermore, within rbd_get_client(), it appears the mutex only
needs to be held while calling rbd_client_create().  (Moving
the lock inside that function will wait for the next patch.)

Signed-off-by: Alex Elder <elder@dreamhost.com>
Signed-off-by: Sage Weil <sage@newdream.net>
2012-03-22 10:47:47 -05:00
Alex Elder e6994d3dde rbd: release client list lock sooner
In rbd_get_client(), if a client is reused, a number of things
get done while still holding the list lock unnecessarily.

This just moves a few things that need no lock protection outside
the lock.

Signed-off-by: Alex Elder <elder@dreamhost.com>
Signed-off-by: Sage Weil <sage@newdream.net>
2012-03-22 10:47:47 -05:00
Alex Elder d184f6bfde rbd: restore previous rbd id sequence behavior
It used to be that selecting a new unique identifier for an added
rbd device required searching all existing ones to find the highest
id is used.  A recent change made that unnecessary, but made it
so that id's used were monotonically non-decreasing.  It's a bit
more pleasant to have smaller rbd id's though, and this change
makes ids get allocated as they were before--each new id is one more
than the maximum currently in use.

Signed-off-by: Alex Elder <elder@dreamhost.com>
Signed-off-by: Sage Weil <sage@newdream.net>
2012-03-22 10:47:47 -05:00
Alex Elder 499afd5b8e rbd: tie rbd_dev_list changes to rbd_id operations
The only time entries are added to or removed from the global
rbd_dev_list is exactly when a "put" or "get" operation is being
performed on a rbd_dev's id.  So just move the list management code
into get/put routines.

Signed-off-by: Alex Elder <elder@dreamhost.com>
Signed-off-by: Sage Weil <sage@newdream.net>
2012-03-22 10:47:47 -05:00
Alex Elder e124a82f3c rbd: protect the rbd_dev_list with a spinlock
The rbd_dev_list is just a simple list of all the current
rbd_devices.  Using the ctl_mutex as a concurrency guard is
overkill.  Instead, use a spinlock for that specific purpose.

This also reduces the window that the ctl_mutex needs to be held in
rbd_add().

Signed-off-by: Alex Elder <elder@dreamhost.com>
Signed-off-by: Sage Weil <sage@newdream.net>
2012-03-22 10:47:47 -05:00
Alex Elder 1ddbe94eda rbd: rework calculation of new rbd id's
In order to select a new unique identifier for an added rbd device,
the list of all existing ones is searched and a value one greater
than the highest id is used.

The list search can be avoided by using an atomic variable that
keeps track of the current highest id.  Using a get/put model for
id's we can limit the boundless growth of id numbers a bit by
arranging to reuse the current highest id once it gets released.
Add these calls to "put" the id when an rbd is getting removed.

Note that this changes the pattern of device id's used--new values
will never be below the highest one seen so far (even if there
exists an unused lower one).  I assert this is OK because the key
property of an rbd id is its uniqueness, not its magnitude.

Regardless, a follow-on patch will restore the old way of doing
things, I just think this commit just makes the incremental change
to atomics a little easier to understand.

Signed-off-by: Alex Elder <elder@dreamhost.com>
Signed-off-by: Sage Weil <sage@newdream.net>
2012-03-22 10:47:47 -05:00
Alex Elder b7f23c361b rbd: encapsulate new rbd id selection
Move the loop that finds a new unique rbd id to use into
its own helper function.

Signed-off-by: Alex Elder <elder@dreamhost.com>
Signed-off-by: Sage Weil <sage@newdream.net>
2012-03-22 10:47:47 -05:00
Josh Durgin cc9d734c3d rbd: use a single value of snap_name to mean no snap
There's already a constant for this anyway.

Since rbd_header_set_snap() is only used to set the rbd device
snap_name field, just do that within that function rather than
having it take the snap_name as an argument.

Signed-off-by: Alex Elder <elder@dreamhost.com>
Signed-off-by: Sage Weil <sage@newdream.net>

v2: Changed interface rbd_header_set_snap() so it explicitly updates
    the snap_name in the rbd_device.  Also added a BUILD_BUG_ON()
    to verify the size of the snap_name field is sufficient for
    SNAP_HEAD_NAME.
2012-03-22 10:47:47 -05:00
Alex Elder 1dbb439913 rbd: do not duplicate ceph_client pointer in rbd_device
The rbd_device structure maintains a duplicate copy of the
ceph_client pointer maintained in its rbd_client structure.  There
appears to be no good reason for this, and its presence presents a
risk of them getting out of synch or otherwise misused.  So kill it
off, and use the rbd_client copy only.

Signed-off-by: Alex Elder <elder@dreamhost.com>
Signed-off-by: Sage Weil <sage@newdream.net>
2012-03-22 10:47:47 -05:00
Alex Elder ee57741c52 rbd: make ceph_parse_options() return a pointer
ceph_parse_options() takes the address of a pointer as an argument
and uses it to return the address of an allocated structure if
successful.  With this interface is not evident at call sites that
the pointer is always initialized.  Change the interface to return
the address instead (or a pointer-coded error code) to make the
validity of the returned pointer obvious.

Signed-off-by: Alex Elder <elder@dreamhost.com>
Signed-off-by: Sage Weil <sage@newdream.net>
2012-03-22 10:47:47 -05:00
Alex Elder 2107978668 rbd: a few small cleanups
Some minor cleanups in "drivers/block/rbd.c:
    - Use the more meaningful "RBD_MAX_OBJ_NAME_LEN" in place if "96"
      in the definition of RBD_MAX_MD_NAME_LEN.
    - Use DEFINE_SPINLOCK() to define and initialize node_lock.
    - Drop a needless (char *) cast in parse_rbd_opts_token().
    - Make a few minor formatting changes.

Signed-off-by: Alex Elder <elder@dreamhost.com>
Signed-off-by: Sage Weil <sage@newdream.net>
2012-03-22 10:47:46 -05:00
Igor Mammedov b9136d207f xen: initialize platform-pci even if xen_emul_unplug=never
When xen_emul_unplug=never is specified on kernel command line
reading files from /sys/hypervisor is broken (returns -EBUSY).
It is caused by xen_bus dependency on platform-pci and
platform-pci isn't initialized when xen_emul_unplug=never is
specified.

Fix it by allowing platform-pci to ignore xen_emul_unplug=never,
and do not intialize xen_[blk|net]front instead.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-03-22 11:37:11 -04:00
Linus Torvalds 5375871d43 Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
Pull powerpc merge from Benjamin Herrenschmidt:
 "Here's the powerpc batch for this merge window.  It is going to be a
  bit more nasty than usual as in touching things outside of
  arch/powerpc mostly due to the big iSeriesectomy :-) We finally got
  rid of the bugger (legacy iSeries support) which was a PITA to
  maintain and that nobody really used anymore.

  Here are some of the highlights:

   - Legacy iSeries is gone.  Thanks Stephen ! There's still some bits
     and pieces remaining if you do a grep -ir series arch/powerpc but
     they are harmless and will be removed in the next few weeks
     hopefully.

   - The 'fadump' functionality (Firmware Assisted Dump) replaces the
     previous (equivalent) "pHyp assisted dump"...  it's a rewrite of a
     mechanism to get the hypervisor to do crash dumps on pSeries, the
     new implementation hopefully being much more reliable.  Thanks
     Mahesh Salgaonkar.

   - The "EEH" code (pSeries PCI error handling & recovery) got a big
     spring cleaning, motivated by the need to be able to implement a
     new backend for it on top of some new different type of firwmare.

     The work isn't complete yet, but a good chunk of the cleanups is
     there.  Note that this adds a field to struct device_node which is
     not very nice and which Grant objects to.  I will have a patch soon
     that moves that to a powerpc private data structure (hopefully
     before rc1) and we'll improve things further later on (hopefully
     getting rid of the need for that pointer completely).  Thanks Gavin
     Shan.

   - I dug into our exception & interrupt handling code to improve the
     way we do lazy interrupt handling (and make it work properly with
     "edge" triggered interrupt sources), and while at it found & fixed
     a wagon of issues in those areas, including adding support for page
     fault retry & fatal signals on page faults.

   - Your usual random batch of small fixes & updates, including a bunch
     of new embedded boards, both Freescale and APM based ones, etc..."

I fixed up some conflicts with the generalized irq-domain changes from
Grant Likely, hopefully correctly.

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (141 commits)
  powerpc/ps3: Do not adjust the wrapper load address
  powerpc: Remove the rest of the legacy iSeries include files
  powerpc: Remove the remaining CONFIG_PPC_ISERIES pieces
  init: Remove CONFIG_PPC_ISERIES
  powerpc: Remove FW_FEATURE ISERIES from arch code
  tty/hvc_vio: FW_FEATURE_ISERIES is no longer selectable
  powerpc/spufs: Fix double unlocks
  powerpc/5200: convert mpc5200 to use of_platform_populate()
  powerpc/mpc5200: add options to mpc5200_defconfig
  powerpc/mpc52xx: add a4m072 board support
  powerpc/mpc5200: update mpc5200_defconfig to fit for charon board
  Documentation/powerpc/mpc52xx.txt: Checkpatch cleanup
  powerpc/44x: Add additional device support for APM821xx SoC and Bluestone board
  powerpc/44x: Add support PCI-E for APM821xx SoC and Bluestone board
  MAINTAINERS: Update PowerPC 4xx tree
  powerpc/44x: The bug fixed support for APM821xx SoC and Bluestone board
  powerpc: document the FSL MPIC message register binding
  powerpc: add support for MPIC message register API
  powerpc/fsl: Added aliased MSIIR register address to MSI node in dts
  powerpc/85xx: mpc8548cds - add 36-bit dts
  ...
2012-03-21 18:55:10 -07:00
Linus Torvalds 9f3938346a Merge branch 'kmap_atomic' of git://github.com/congwang/linux
Pull kmap_atomic cleanup from Cong Wang.

It's been in -next for a long time, and it gets rid of the (no longer
used) second argument to k[un]map_atomic().

Fix up a few trivial conflicts in various drivers, and do an "evil
merge" to catch some new uses that have come in since Cong's tree.

* 'kmap_atomic' of git://github.com/congwang/linux: (59 commits)
  feature-removal-schedule.txt: schedule the deprecated form of kmap_atomic() for removal
  highmem: kill all __kmap_atomic() [swarren@nvidia.com: highmem: Fix ARM build break due to __kmap_atomic rename]
  drbd: remove the second argument of k[un]map_atomic()
  zcache: remove the second argument of k[un]map_atomic()
  gma500: remove the second argument of k[un]map_atomic()
  dm: remove the second argument of k[un]map_atomic()
  tomoyo: remove the second argument of k[un]map_atomic()
  sunrpc: remove the second argument of k[un]map_atomic()
  rds: remove the second argument of k[un]map_atomic()
  net: remove the second argument of k[un]map_atomic()
  mm: remove the second argument of k[un]map_atomic()
  lib: remove the second argument of k[un]map_atomic()
  power: remove the second argument of k[un]map_atomic()
  kdb: remove the second argument of k[un]map_atomic()
  udf: remove the second argument of k[un]map_atomic()
  ubifs: remove the second argument of k[un]map_atomic()
  squashfs: remove the second argument of k[un]map_atomic()
  reiserfs: remove the second argument of k[un]map_atomic()
  ocfs2: remove the second argument of k[un]map_atomic()
  ntfs: remove the second argument of k[un]map_atomic()
  ...
2012-03-21 09:40:26 -07:00
Linus Torvalds 69a7aebcf0 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
Pull trivial tree from Jiri Kosina:
 "It's indeed trivial -- mostly documentation updates and a bunch of
  typo fixes from Masanari.

  There are also several linux/version.h include removals from Jesper."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (101 commits)
  kcore: fix spelling in read_kcore() comment
  constify struct pci_dev * in obvious cases
  Revert "char: Fix typo in viotape.c"
  init: fix wording error in mm_init comment
  usb: gadget: Kconfig: fix typo for 'different'
  Revert "power, max8998: Include linux/module.h just once in drivers/power/max8998_charger.c"
  writeback: fix fn name in writeback_inodes_sb_nr_if_idle() comment header
  writeback: fix typo in the writeback_control comment
  Documentation: Fix multiple typo in Documentation
  tpm_tis: fix tis_lock with respect to RCU
  Revert "media: Fix typo in mixer_drv.c and hdmi_drv.c"
  Doc: Update numastat.txt
  qla4xxx: Add missing spaces to error messages
  compiler.h: Fix typo
  security: struct security_operations kerneldoc fix
  Documentation: broken URL in libata.tmpl
  Documentation: broken URL in filesystems.tmpl
  mtd: simplify return logic in do_map_probe()
  mm: fix comment typo of truncate_inode_pages_range
  power: bq27x00: Fix typos in comment
  ...
2012-03-20 21:12:50 -07:00
Linus Torvalds ed378a52da USB merge for 3.4-rc1
Here's the big USB merge for the 3.4-rc1 merge window.
 
 Lots of gadget driver reworks here, driver updates, xhci changes, some
 new drivers added, usb-serial core reworking to fix some bugs, and other
 various minor things.
 
 There are some patches touching arch code, but they have all been acked
 by the various arch maintainers.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.18 (GNU/Linux)
 
 iEYEABECAAYFAk9njL8ACgkQMUfUDdst+ylQ9wCfbBOnIT01lGOorkaE9pom0hhk
 HfMAoKq1xzCR2B+OS3UMyUQffk+Ri9Ri
 =KIQ2
 -----END PGP SIGNATURE-----

Merge tag 'usb-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB merge for 3.4-rc1 from Greg KH:
 "Here's the big USB merge for the 3.4-rc1 merge window.

  Lots of gadget driver reworks here, driver updates, xhci changes, some
  new drivers added, usb-serial core reworking to fix some bugs, and
  other various minor things.

  There are some patches touching arch code, but they have all been
  acked by the various arch maintainers."

* tag 'usb-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (302 commits)
  net: qmi_wwan: add support for ZTE MF820D
  USB: option: add ZTE MF820D
  usb: gadget: f_fs: Remove lock is held before freeing checks
  USB: option: make interface blacklist work again
  usb/ub: deprecate & schedule for removal the "Low Performance USB Block" driver
  USB: ohci-pxa27x: add clk_prepare/clk_unprepare calls
  USB: use generic platform driver on ath79
  USB: EHCI: Add a generic platform device driver
  USB: OHCI: Add a generic platform device driver
  USB: ftdi_sio: new PID: LUMEL PD12
  USB: ftdi_sio: add support for FT-X series devices
  USB: serial: mos7840: Fixed MCS7820 device attach problem
  usb: Don't make USB_ARCH_HAS_{XHCI,OHCI,EHCI} depend on USB_SUPPORT.
  usb gadget: fix a section mismatch when compiling g_ffs with CONFIG_USB_FUNCTIONFS_ETH
  USB: ohci-nxp: Remove i2c_write(), use smbus
  USB: ohci-nxp: Support for LPC32xx
  USB: ohci-nxp: Rename symbols from pnx4008 to nxp
  USB: OHCI-HCD: Rename ohci-pnx4008 to ohci-nxp
  usb: gadget: Kconfig: fix typo for 'different'
  usb: dwc3: pci: fix another failure path in dwc3_pci_probe()
  ...
2012-03-20 11:26:30 -07:00
Cong Wang 589973a704 drbd: remove the second argument of k[un]map_atomic()
Signed-off-by: Cong Wang <amwang@redhat.com>
2012-03-20 21:48:29 +08:00
Cong Wang cfd8005c99 block: remove the second argument of k[un]map_atomic()
Signed-off-by: Cong Wang <amwang@redhat.com>
2012-03-20 21:48:16 +08:00
Steven Noonan 3467811e26 xen-blkfront: make blkif_io_lock spinlock per-device
This patch moves the global blkif_io_lock to the per-device structure. The
spinlock seems to exists for two reasons: to disable IRQs when in the interrupt
handlers for blkfront, and to protect the blkfront VBDs when a detachment is
requested.

Having a global blkif_io_lock doesn't make sense given the use case, and it
drastically hinders performance due to contention. All VBDs with pending IOs
have to take the lock in order to get work done, which serializes everything
pretty badly.

Signed-off-by: Steven Noonan <snoonan@amazon.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-03-20 12:52:41 +01:00
Andrew Jones dad5cf659b xen/blkfront: don't put bdev right after getting it
We should hang onto bdev until we're done with it.

Signed-off-by: Andrew Jones <drjones@redhat.com>
[v1: Fixed up git commit description]
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-03-20 12:52:41 +01:00
Akinobu Mita 34ae2e47d9 xen-blkfront: use bitmap_set() and bitmap_clear()
Use bitmap_set and bitmap_clear rather than modifying individual bits
in a memory region.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: xen-devel@lists.xensource.com
Cc: virtualization@lists.linux-foundation.org
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-03-20 12:52:41 +01:00
Daniel De Graaf b2167ba6dd xen/blkback: Enable blkback on HVM guests
Signed-off-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-03-20 12:52:41 +01:00
Daniel De Graaf 4f14faaab4 xen/blkback: use grant-table.c hypercall wrappers
Signed-off-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-03-20 12:52:41 +01:00
Sebastian Andrzej Siewior 7396bd9fa1 usb/ub: deprecate & schedule for removal the "Low Performance USB Block" driver
Deprecate this driver. All devices which can be handled by this driver
can also be handled by the usb-storage driver.

Acked-By: Pete Zaitcev <zaitcev@redhat.com>
Cc: Jens Axboe <jaxboe@fusionio.com>
Signed-off-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-16 13:30:10 -07:00
Stephen Rothwell ba7a4822b4 powerpc: Remove some of the legacy iSeries specific device drivers
These drivers are specific to the PowerPC legacy iSeries platform and
their Kconfig is specified in arch/powerpc.  Legacy iSeries is being
removed, so these drivers can no longer be selected.

Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-03-16 09:28:05 +11:00
Linus Torvalds f1cbd03f5e Merge branch 'for-linus' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
 "Been sitting on this for a while, but lets get this out the door.
  This fixes various important bugs for 3.3 final, along with a few more
  trivial ones.  Please pull!"

* 'for-linus' of git://git.kernel.dk/linux-block:
  block: fix ioc leak in put_io_context
  block, sx8: fix pointer math issue getting fw version
  Block: use a freezable workqueue for disk-event polling
  drivers/block/DAC960: fix -Wuninitialized warning
  drivers/block/DAC960: fix DAC960_V2_IOCTL_Opcode_T -Wenum-compare warning
  block: fix __blkdev_get and add_disk race condition
  block: Fix setting bio flags in drivers (sd_dif/floppy)
  block: Fix NULL pointer dereference in sd_revalidate_disk
  block: exit_io_context() should call elevator_exit_icq_fn()
  block: simplify ioc_release_fn()
  block: replace icq->changed with icq->flags
2012-03-14 17:16:45 -07:00
Greg Kroah-Hartman f7a0d426f3 Merge 3.3-rc7 into usb-next
This resolves the conflict with drivers/usb/host/ehci-fsl.h that
happened with changes in Linus's and this branch at the same time.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-12 09:13:31 -07:00
Muthu Kumar 9354f1b8e6 floppy/scsi: fix setting of BIO flags
Fix setting bio flags in drivers (sd_dif/floppy).

Signed-off-by: Muthukumar R <muthur@gmail.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-05 15:49:43 -08:00
Dan Carpenter ea5f4db8ec block, sx8: fix pointer math issue getting fw version
"mem" is type u8.  We need parenthesis here or it screws up the pointer
math probably leading to an oops.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: stable@kernel.org
Acked-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-03-03 19:44:39 +01:00
Danny Kukawka cecd353a02 drivers/block/DAC960: fix -Wuninitialized warning
Set CommandMailbox with memset before use it. Fix for:

drivers/block/DAC960.c: In function ‘DAC960_V1_EnableMemoryMailboxInterface’:
arch/x86/include/asm/io.h:61:1: warning: ‘CommandMailbox.Bytes[12]’
 may be used uninitialized in this function [-Wuninitialized]
drivers/block/DAC960.c:1175:30: note: ‘CommandMailbox.Bytes[12]’
 was declared here

Signed-off-by: Danny Kukawka <danny.kukawka@bisect.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-03-02 10:48:35 +01:00
Danny Kukawka bca505f109 drivers/block/DAC960: fix DAC960_V2_IOCTL_Opcode_T -Wenum-compare warning
Fixed compiler warning:

comparison between ‘DAC960_V2_IOCTL_Opcode_T’ and ‘enum <anonymous>’

Renamed enum, added a new enum for SCSI_10.CommandOpcode in
DAC960_V2_ProcessCompletedCommand().

Signed-off-by: Danny Kukawka <danny.kukawka@bisect.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-03-02 10:48:32 +01:00
Muthukumar R 12ebffd146 block: Fix setting bio flags in drivers (sd_dif/floppy)
Fix setting bio flags in drivers (sd_dif/floppy).

Signed-off-by: Muthukumar R <muthur@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-03-02 10:40:58 +01:00
Sebastian Andrzej Siewior 7ac4704c09 usb/storage: a couple defines from drivers/usb/storage/transport.h to include/linux/usb/storage.h
This moves the BOT data structures for CBW and CSW from drivers internal
header file to global include able file in include/.
The storage gadget is using the same name for CSW but a different for
CBW so I fix it up properly. The same goes for the ub driver and keucr
driver in staging.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-28 11:05:18 -08:00
Hitoshi Mitake 797a796a13 asm-generic: architecture independent readq/writeq for 32bit environment
This provides unified readq()/writeq() helper functions for 32-bit
drivers.

For some cases, readq/writeq without atomicity is harmful, and order of
io access has to be specified explicitly.  So in this patch, new two
header files which contain non-atomic readq/writeq are added.

 - <asm-generic/io-64-nonatomic-lo-hi.h> provides non-atomic readq/
   writeq with the order of lower address -> higher address

 - <asm-generic/io-64-nonatomic-hi-lo.h> provides non-atomic readq/
   writeq with reversed order

This allows us to remove some readq()s that were added drivers when the
default non-atomic ones were removed in commit dbee8a0aff ("x86:
remove 32-bit versions of readq()/writeq()")

The drivers which need readq/writeq but can do with the non-atomic ones
must add the line:

  #include <asm-generic/io-64-nonatomic-lo-hi.h> /* or hi-lo.h */

But this will be nop in 64-bit environments, and no other #ifdefs are
required.  So I believe that this patch can solve the problem of
 1. driver-specific readq/writeq
 2. atomicity and order of io access

This patch is tested with building allyesconfig and allmodconfig as
ARCH=x86 and ARCH=i386 on top of tip/master.

Cc: Kashyap Desai <Kashyap.Desai@lsi.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Ravi Anand <ravi.anand@qlogic.com>
Cc: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Jason Uhlenkott <juhlenko@akamai.com>
Cc: James Bottomley <James.Bottomley@parallels.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Roland Dreier <roland@purestorage.com>
Cc: James Bottomley <jbottomley@parallels.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Matthew Wilcox <matthew.r.wilcox@intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Hitoshi Mitake <h.mitake@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-02-21 16:47:28 -08:00
Jesper Juhl d0156f4d62 NVM Express: Remove unneeded include of linux/version.h from nvme.c
There's no need for drivers/block/nvme.c to include linux/version.h,
so remove the include.

Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-02-21 11:48:54 +01:00
Linus Torvalds 3ec1e88b33 Merge branch 'for-linus' of git://git.kernel.dk/linux-block
Says Jens:

 "Time to push off some of the pending items.  I really wanted to wait
  until we had the regression nailed, but alas it's not quite there yet.
  But I'm very confident that it's "just" a missing expire on exit, so
  fix from Tejun should be fairly trivial.  I'm headed out for a week on
  the slopes.

  - Killing the barrier part of mtip32xx.  It doesn't really support
    barriers, and it doesn't need them (writes are fully ordered).

  - A few fixes from Dan Carpenter, preventing overflows of integer
    multiplication.

  - A fixup for loop, fixing a previous commit that didn't quite solve
    the partial read problem from Dave Young.

  - A bio integer overflow fix from Kent Overstreet.

  - Improvement/fix of the door "keep locked" part of the cdrom shared
    code from Paolo Benzini.

  - A few cfq fixes from Shaohua Li.

  - A fix for bsg sysfs warning when removing a file it did not create
    from Stanislaw Gruszka.

  - Two fixes for floppy from Vivek, preventing a crash.

  - A few block core fixes from Tejun.  One killing the over-optimized
    ioc exit path, cleaning that up nicely.  Two others fixing an oops
    on elevator switch, due to calling into the scheduler merge check
    code without holding the queue lock."

* 'for-linus' of git://git.kernel.dk/linux-block:
  block: fix lockdep warning on io_context release put_io_context()
  relay: prevent integer overflow in relay_open()
  loop: zero fill bio instead of return -EIO for partial read
  bio: don't overflow in bio_get_nr_vecs()
  floppy: Fix a crash during rmmod
  floppy: Cleanup disk->queue before caling put_disk() if add_disk() was never called
  cdrom: move shared static to cdrom_device_info
  bsg: fix sysfs link remove warning
  block: don't call elevator callbacks for plug merges
  block: separate out blk_rq_merge_ok() and blk_try_merge() from elevator functions
  mtip32xx: removed the irrelevant argument of mtip_hw_submit_io() and the unused member of struct driver_data
  block: strip out locking optimization in put_io_context()
  cdrom: use copy_to_user() without the underscores
  block: fix ioc locking warning
  block: fix NULL icq_cache reference
  block,cfq: change code order
2012-02-11 10:07:11 -08:00
Dave Young 306df0716a loop: zero fill bio instead of return -EIO for partial read
commit 8268f5a741 ("deny partial write for loop dev fd") tried to fix the
loop device partial read information leak problem.  But it changed the
semantics of read behavior.  When we read beyond the end of the device we
should get 0 bytes, which is normal behavior, we should not just return
-EIO

Instead of returning -EIO, zero out the bio to avoid information leak in
case of partail read.

Signed-off-by: Dave Young <dyoung@redhat.com>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Tested-by: Jeff Moyer <jmoyer@redhat.com>
Cc: Dmitry Monakhov <dmonakhov@sw.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-02-08 22:07:19 +01:00
Vivek Goyal 4609dff6b5 floppy: Fix a crash during rmmod
floppy driver does not call add_disk() on all the drives hence we don't take
gendisk reference on request queue for these drives. Don't call put_disk()
with disk->queue set, otherwise we try to put the reference we never took.

Reported-and-tested-by: Dirk Gouders <gouders@et.bocholt.fh-gelsenkirchen.de>
Signed-off-by: Vivek Goyal<vgoyal@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-02-08 20:03:39 +01:00
Vivek Goyal 3f9a5aabd0 floppy: Cleanup disk->queue before caling put_disk() if add_disk() was never called
add_disk() takes gendisk reference on request queue. If driver failed during
initialization and never called add_disk() then that extra reference is not
taken. That reference is put in put_disk(). floppy driver allocates the
disk, allocates queue, sets disk->queue and then relizes that floppy
controller is not present. It tries to tear down everything and tries to
put a reference down in put_disk() which was never taken.

In such error cases cleanup disk->queue before calling put_disk() so that
we never try to put down a reference which was never taken in first place.

Reported-and-tested-by: Suresh Jayaraman <sjayaraman@suse.com>
Tested-by: Dirk Gouders <gouders@et.bocholt.fh-gelsenkirchen.de>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-02-08 20:03:38 +01:00
Asai Thambi S P 4e8670e261 mtip32xx: removed the irrelevant argument of mtip_hw_submit_io() and the unused member of struct driver_data
Removed the following:
	* irrelevant argument 'barrier' of mtip_hw_submit_io()
	* unused member 'eh_active' of struct driver_data

Signed-off-by: Asai Thambi S P <asamymuthupa@micron.com>
Signed-off-by: Sam Bradshaw <sbradshaw@micron.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-02-07 07:54:31 +01:00
Linus Torvalds 6c073a7ee2 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
  rbd: fix safety of rbd_put_client()
  rbd: fix a memory leak in rbd_get_client()
  ceph: create a new session lock to avoid lock inversion
  ceph: fix length validation in parse_reply_info()
  ceph: initialize client debugfs outside of monc->mutex
  ceph: change "ceph.layout" xattr to be "ceph.file.layout"
2012-02-02 15:47:33 -08:00
Alex Elder d23a4b3fd6 rbd: fix safety of rbd_put_client()
The rbd_client structure uses a kref to arrange for cleaning up and
freeing an instance when its last reference is dropped.  The cleanup
routine is rbd_client_release(), and one of the things it does is
delete the rbd_client from rbd_client_list.  It acquires node_lock
to do so, but the way it is done is still not safe.

The problem is that when attempting to reuse an existing rbd_client,
the structure found might already be in the process of getting
destroyed and cleaned up.

Here's the scenario, with "CLIENT" representing an existing
rbd_client that's involved in the race:

 Thread on CPU A                | Thread on CPU B
 ---------------                | ---------------
 rbd_put_client(CLIENT)         | rbd_get_client()
   kref_put()                   |   (acquires node_lock)
     kref->refcount becomes 0   |   __rbd_client_find() returns CLIENT
     calls rbd_client_release() |   kref_get(&CLIENT->kref);
                                |   (releases node_lock)
       (acquires node_lock)     |
       deletes CLIENT from list | ...and starts using CLIENT...
       (releases node_lock)     |
       and frees CLIENT         | <-- but CLIENT gets freed here

Fix this by having rbd_put_client() acquire node_lock.  The result
could still be improved, but at least it avoids this problem.

Signed-off-by: Alex Elder <elder@dreamhost.com>
Signed-off-by: Sage Weil <sage@newdream.net>
2012-02-02 12:56:59 -08:00
Alex Elder 97bb59a03d rbd: fix a memory leak in rbd_get_client()
If an existing rbd client is found to be suitable for use in
rbd_get_client(), the rbd_options structure is not being
freed as it should.  Fix that.

Signed-off-by: Alex Elder <elder@dreamhost.com>
Signed-off-by: Sage Weil <sage@newdream.net>
2012-02-02 12:49:27 -08:00
Linus Torvalds 93c3d65b28 nvme: fix merge error due to change of 'make_request_fn' fn type
The type of 'make_request_fn' changed in 5a7bbad27a ("block: remove
support for bio remapping from ->make_request"), but the merge of the
nvme driver didn't take that into account, and as a result the driver
would compile with a warning:

  drivers/block/nvme.c: In function 'nvme_alloc_ns':
  drivers/block/nvme.c:1336:2: warning: passing argument 2 of 'blk_queue_make_request' from incompatible pointer type [enabled by default]
  include/linux/blkdev.h:830:13: note: expected 'void (*)(struct request_queue *, struct bio *)' but argument is of type 'int (*)(struct request_queue *, struct bio *)'

It's benign, but the warning is annoying.

Reported-by: Stephen Rothwell <sfr@canb.auug.org>
Cc: Matthew Wilcox <matthew.r.wilcox@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-18 15:41:27 -08:00
Linus Torvalds 92b5abbb44 Merge git://git.infradead.org/users/willy/linux-nvme
* git://git.infradead.org/users/willy/linux-nvme: (105 commits)
  NVMe: Set number of queues correctly
  NVMe: Version 0.8
  NVMe: Set queue flags correctly
  NVMe: Simplify nvme_unmap_user_pages
  NVMe: Mark the end of the sg list
  NVMe: Fix DMA mapping for admin commands
  NVMe: Rename IO_TIMEOUT to NVME_IO_TIMEOUT
  NVMe: Merge the nvme_bio and nvme_prp data structures
  NVMe: Change nvme_completion_fn to take a dev
  NVMe: Change get_nvmeq to take a dev instead of a namespace
  NVMe: Simplify completion handling
  NVMe: Update Identify Controller data structure
  NVMe: Implement doorbell stride capability
  NVMe: Version 0.7
  NVMe: Don't probe namespace 0
  Fix calculation of number of pages in a PRP List
  NVMe: Create nvme_identify and nvme_get_features functions
  NVMe: Fix memory leak in nvme_dev_add()
  NVMe: Fix calls to dma_unmap_sg
  NVMe: Correct sg list setup in nvme_map_user_pages
  ...
2012-01-18 12:34:09 -08:00
Linus Torvalds 16008d6416 Merge branch 'for-3.3/drivers' of git://git.kernel.dk/linux-block
* 'for-3.3/drivers' of git://git.kernel.dk/linux-block:
  mtip32xx: do rebuild monitoring asynchronously
  xen-blkfront: Use kcalloc instead of kzalloc to allocate array
  mtip32xx: uninitialized variable in mtip_quiesce_io()
  mtip32xx: updates based on feedback
  xen-blkback: convert hole punching to discard request on loop devices
  xen/blkback: Move processing of BLKIF_OP_DISCARD from dispatch_rw_block_io
  xen/blk[front|back]: Enhance discard support with secure erasing support.
  xen/blk[front|back]: Squash blkif_request_rw and blkif_request_discard together
  mtip32xx: update to new ->make_request() API
  mtip32xx: add module.h include to avoid conflict with moduleh tree
  mtip32xx: mark a few more items static
  mtip32xx: ensure that all local functions are static
  mtip32xx: cleanup compat ioctl handling
  mtip32xx: fix warnings/errors on 32-bit compiles
  block: Add driver for Micron RealSSD pcie flash cards
2012-01-15 12:48:41 -08:00
Linus Torvalds b3c9dd182e Merge branch 'for-3.3/core' of git://git.kernel.dk/linux-block
* 'for-3.3/core' of git://git.kernel.dk/linux-block: (37 commits)
  Revert "block: recursive merge requests"
  block: Stop using macro stubs for the bio data integrity calls
  blockdev: convert some macros to static inlines
  fs: remove unneeded plug in mpage_readpages()
  block: Add BLKROTATIONAL ioctl
  block: Introduce blk_set_stacking_limits function
  block: remove WARN_ON_ONCE() in exit_io_context()
  block: an exiting task should be allowed to create io_context
  block: ioc_cgroup_changed() needs to be exported
  block: recursive merge requests
  block, cfq: fix empty queue crash caused by request merge
  block, cfq: move icq creation and rq->elv.icq association to block core
  block, cfq: restructure io_cq creation path for io_context interface cleanup
  block, cfq: move io_cq exit/release to blk-ioc.c
  block, cfq: move icq cache management to block core
  block, cfq: move io_cq lookup to blk-ioc.c
  block, cfq: move cfqd->icq_list to request_queue and add request->elv.icq
  block, cfq: reorganize cfq_io_context into generic and cfq specific parts
  block: remove elevator_queue->ops
  block: reorder elevator switch sequence
  ...

Fix up conflicts in:
 - block/blk-cgroup.c
	Switch from can_attach_task to can_attach
 - block/cfq-iosched.c
	conflict with now removed cic index changes (we now use q->id instead)
2012-01-15 12:24:45 -08:00
Jens Axboe 85a0f7b220 Merge branch 'for-3.3/mtip32xx' into for-3.3/drivers 2012-01-15 10:39:35 +01:00
Paolo Bonzini 577ebb374c block: add and use scsi_blk_cmd_ioctl
Introduce a wrapper around scsi_cmd_ioctl that takes a block device.

The function will then be enhanced to detect partition block devices
and, in that case, subject the ioctls to whitelisting.

Cc: linux-scsi@vger.kernel.org
Cc: Jens Axboe <axboe@kernel.dk>
Cc: James Bottomley <JBottomley@parallels.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-14 15:07:24 -08:00
Linus Torvalds 0a80939b3e Autogenerated GPG tag for Rusty D1ADB8F1: 15EE 8D6C AB0E 7F0C F999 BFCB D920 0E6C D1AD B8F1
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJPD2aFAAoJENkgDmzRrbjxNzsQAIeYbbrXYLjr6kQzUSngj/eC
 FzjaTEfYTQIeuQCFJHcHthyc5lXV4sQbo3jOezW+Bp5yuDJL2aWIHesSfWZe7imu
 zQdM4VshOYdAmUR9Q0AW5zhB8Smbs7/AyABiF2jm4p0ZPOuyMDSlei9sjvE9Vjvt
 B7g5ht7L6kz0JbDnwwy0u5gs+tEitwpXYId9Y4ysZIBzIbL0qkPX8veOddGTMy0N
 8xhWXaKtufpjvxFD2ORLDsw3AkoF1xXSNuFd/5nzCNpbeE7TW931jfkPoqJumuAO
 7GLxcU9kKYl+IICobC6wBtsj/RrB7w+cBXMvPGwdBliam1qaRhUcJZi5FLM/Ha5d
 2A9QDYNUpoXiO8JbPXrV9Z+Y0+Co8RilsQj7R/rjZh6AbbYCWt9nxzx2Svl/RfTr
 xfiimHuB2P3rHjOvpCXULwOOuE5c8MzPuWncpdjiD3uGXOY/aY+X1m+if/quJw9D
 grPlKL0+YiRakEYUeGG4M77KCqyKFZaF7L7UQPbqfZcj8V/9AW3/7U5I/B9RlAjs
 idsr4fcf5s0N+oKUyTCW1ncpUDQNiwbU2NyJQqeu1ZxaRGj72AgyvsaNeyIPDyK+
 f6x95Bi7i8KLjXc9Z1KvJwh2Nxt25gNUiTYVha/9H2NpJGd1cfI15kTOGXrgddVv
 1pvuGcJDZwYiwfiXr3FL
 =HHrh
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://github.com/rustyrussell/linux

Autogenerated GPG tag for Rusty D1ADB8F1: 15EE 8D6C AB0E 7F0C F999  BFCB D920 0E6C D1AD B8F1

* tag 'for-linus' of git://github.com/rustyrussell/linux:
  module_param: check that bool parameters really are bool.
  intelfbdrv.c: bailearly is an int module_param
  paride/pcd: fix bool verbose module parameter.
  module_param: make bool parameters really bool (drivers & misc)
  module_param: make bool parameters really bool (arch)
  module_param: make bool parameters really bool (core code)
  kernel/async: remove redundant declaration.
  printk: fix unnecessary module_param_name.
  lirc_parallel: fix module parameter description.
  module_param: avoid bool abuse, add bint for special cases.
  module_param: check type correctness for module_param_array
  modpost: use linker section to generate table.
  modpost: use a table rather than a giant if/else statement.
  modules: sysfs - export: taint, coresize, initsize
  kernel/params: replace DEBUGP with pr_debug
  module: replace DEBUGP with pr_debug
  module: struct module_ref should contains long fields
  module: Fix performance regression on modules with large symbol tables
  module: Add comments describing how the "strmap" logic works

Fix up conflicts in scripts/mod/file2alias.c due to the new linker-
generated table approach to adding __mod_*_device_table entries.  The
ARM sa11x0 mcp bus needed to be converted to that too.
2012-01-14 12:32:16 -08:00
Linus Torvalds 1a52bb0b68 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
  ceph: ensure prealloc_blob is in place when removing xattr
  rbd: initialize snap_rwsem in rbd_add()
  ceph: enable/disable dentry complete flags via mount option
  vfs: export symbol d_find_any_alias()
  ceph: always initialize the dentry in open_root_dentry()
  libceph: remove useless return value for osd_client __send_request()
  ceph: avoid iput() while holding spinlock in ceph_dir_fsync
  ceph: avoid useless dget/dput in encode_fh
  ceph: dereference pointer after checking for NULL
  crush: fix force for non-root TAKE
  ceph: remove unnecessary d_fsdata conditional checks
  ceph: Use kmemdup rather than duplicating its implementation

Fix up conflicts in fs/ceph/super.c (d_alloc_root() failure handling vs
always initialize the dentry in open_root_dentry)
2012-01-13 10:29:21 -08:00
Rusty Russell 1b9fbafb3a paride/pcd: fix bool verbose module parameter.
Dan Carpenter points out that it's an int, not a bool:

pcd.c:427:				if (verbose > 1)
pcd.c:433:				if (verbose > 1)
pcd.c:437:				if (verbose < 2)
pcd.c:506:#define DBMSG(msg)	((verbose>1)?(msg):NULL)

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
2012-01-13 09:32:26 +10:30
Rusty Russell 90ab5ee941 module_param: make bool parameters really bool (drivers & misc)
module_param(bool) used to counter-intuitively take an int.  In
fddd5201 (mid-2009) we allowed bool or int/unsigned int using a messy
trick.

It's time to remove the int/unsigned int option.  For this version
it'll simply give a warning, but it'll break next kernel version.

Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-01-13 09:32:20 +10:30
Alex Elder 0e805a1d85 rbd: initialize snap_rwsem in rbd_add()
New rbd device structures get initialized in rbd_add().  Many of
the fields rely on being initially zero-filled.  However we lockdep
was noticing that the rw_semaphore embedded in the header field
was not getting properly initialized.  Fix that.

Signed-off-by: Alex Elder <elder@dreamhost.com>
Signed-off-by: Sage Weil <sage@newdream.net>
2012-01-12 11:00:50 -08:00
Amit Shah f8fb5bc23a virtio: blk: Add freeze, restore handlers to support S4
Delete the vq and flush any pending requests from the block queue on the
freeze callback to prepare for hibernation.

Re-create the vq in the restore callback to resume normal function.

Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-01-12 15:44:45 +10:30
Amit Shah 6abd6e5a44 virtio: blk: Move vq initialization to separate function
The probe and PM restore functions will share this code.

Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-01-12 15:44:45 +10:30
Michael S. Tsirkin 4678d6f970 virtio_blk: fix config handler race
Fix a theoretical race related to config work
handler: a config interrupt might happen
after we flush config work but before we
reset the device. It will then cause the
config work to run during or after reset.

Two problems with this:
- if this runs after device is gone we will get use after free
- access of config while reset is in progress is racy
(as layout is changing).

As a solution
1. flush after reset when we know there will be no more interrupts
2. add a flag to disable config access before reset

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-01-12 15:44:44 +10:30
Rusty Russell f96fde41f7 virtio: rename virtqueue_add_buf_gfp to virtqueue_add_buf
Remove wrapper functions. This makes the allocation type explicit in
all callers; I used GPF_KERNEL where it seemed obvious, left it at
GFP_ATOMIC otherwise.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Reviewed-by: Christoph Hellwig <hch@lst.de>
2012-01-12 15:44:42 +10:30
Matthew Wilcox df34813990 NVMe: Set number of queues correctly
The number of submission & completion queues should be set by calling
Set Features, not Get Features.

Reported-by: Kwok Kong <Kwok.Kong@idt.com>
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2012-01-11 09:22:24 -05:00
Linus Torvalds 4690dfa8cd Merge branch 'next' of git://git.monstr.eu/linux-2.6-microblaze
* 'next' of git://git.monstr.eu/linux-2.6-microblaze:
  microblaze: Wire-up new system calls
  microblaze: Remove NO_IRQ from architecture
  input: xilinx_ps2: Don't use NO_IRQ
  block: xsysace: Don't use NO_IRQ
  microblaze: Trivial asm fix
  microblaze: Fix debug message in module
  microblaze: Remove eprintk macro
  microblaze: Send CR before LF for early console
  microblaze: Change NO_IRQ to 0
  microblaze: Use irq_of_parse_and_map for timer
  microblaze: intc: Change variable name
  microblaze: Use of_find_compatible_node for timer and intc
  microblaze: Add __cmpdi2
  microblaze: Synchronize __pa __va macros
2012-01-10 17:37:49 -08:00
Matthew Wilcox 366e8217e5 NVMe: Version 0.8
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2012-01-10 16:30:15 -05:00
Matthew Wilcox 4eeb9215a0 NVMe: Set queue flags correctly
QUEUE_FLAG_* are flags (other than QUEUE_FLAG_DEFAULT), so they cannot
be ORed together.  Set the queue flags using queue_flag_set_unlocked().

Reported-by: Donald Wood <donald.e.wood@intel.com>
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2012-01-10 16:29:23 -05:00
Matthew Wilcox 1c2ad9faaf NVMe: Simplify nvme_unmap_user_pages
By using the iod->nents field (the same way other I/O paths do), we can
avoid recalculating the number of sg entries at unmap time, and make
nvme_unmap_user_pages() easier to call.

Also, use the 'write' parameter instead of assuming DMA_FROM_DEVICE.

Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2012-01-10 14:54:22 -05:00
Matthew Wilcox fe304c43c6 NVMe: Mark the end of the sg list
For user I/O and admin commands, we were forgetting to mark the end of
the SG list.

Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2012-01-10 14:54:14 -05:00
Matthew Wilcox 497421880a NVMe: Fix DMA mapping for admin commands
We were always mapping as DMA_FROM_DEVICE then unmapping with
DMA_TO_DEVICE which was clearly not correct.  Follow the same pattern as
nvme_submit_io() and key off the bottom bit of the opcode to determine
whether this is a read or a write.

Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2012-01-10 14:54:05 -05:00
Matthew Wilcox ff976d724a NVMe: Rename IO_TIMEOUT to NVME_IO_TIMEOUT
IO_TIMEOUT is a little too generic and might be used by other parts of
the kernel in the future.

Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2012-01-10 14:53:54 -05:00
Matthew Wilcox eca18b2394 NVMe: Merge the nvme_bio and nvme_prp data structures
The new merged data structure is called nvme_iod.  This improves performance
for mid-sized I/Os (in the 16k range) since we save a memory allocation.
It is also a slightly simpler interface to use.

Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2012-01-10 14:51:20 -05:00
Matthew Wilcox 5c1281a3bf NVMe: Change nvme_completion_fn to take a dev
The queue is only needed for some rare occasions, and it's more consistent
to pass the device around.

Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2012-01-10 14:51:00 -05:00
Matthew Wilcox 040a93b52a NVMe: Change get_nvmeq to take a dev instead of a namespace
Upcoming patches require calling get_nvmeq when we don't have a namespace.
Some callers already have the device in a local variable anyway.

Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2012-01-10 14:49:18 -05:00
Matthew Wilcox c2f5b65020 NVMe: Simplify completion handling
Instead of encoding the handler type in the bottom two bits of the
per-completion context pointer, store the handler function as well
as the context pointer.  This gives us more flexibility and the code
is clearer.  It comes at the cost of an extra 8k of memory per queue,
but this feels like a reasonable price to pay.

Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2012-01-10 14:47:46 -05:00
Linus Torvalds 90160371b3 Merge branch 'stable/for-linus-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen
* 'stable/for-linus-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: (37 commits)
  xen/pciback: Expand the warning message to include domain id.
  xen/pciback: Fix "device has been assigned to X domain!" warning
  xen/pciback: Move the PCI_DEV_FLAGS_ASSIGNED ops to the "[un|]bind"
  xen/xenbus: don't reimplement kvasprintf via a fixed size buffer
  xenbus: maximum buffer size is XENSTORE_PAYLOAD_MAX
  xen/xenbus: Reject replies with payload > XENSTORE_PAYLOAD_MAX.
  Xen: consolidate and simplify struct xenbus_driver instantiation
  xen-gntalloc: introduce missing kfree
  xen/xenbus: Fix compile error - missing header for xen_initial_domain()
  xen/netback: Enable netback on HVM guests
  xen/grant-table: Support mappings required by blkback
  xenbus: Use grant-table wrapper functions
  xenbus: Support HVM backends
  xen/xenbus-frontend: Fix compile error with randconfig
  xen/xenbus-frontend: Make error message more clear
  xen/privcmd: Remove unused support for arch specific privcmp mmap
  xen: Add xenbus_backend device
  xen: Add xenbus device driver
  xen: Add privcmd device driver
  xen/gntalloc: fix reference counts on multi-page mappings
  ...
2012-01-10 10:09:59 -08:00
Linus Torvalds 98793265b4 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (53 commits)
  Kconfig: acpi: Fix typo in comment.
  misc latin1 to utf8 conversions
  devres: Fix a typo in devm_kfree comment
  btrfs: free-space-cache.c: remove extra semicolon.
  fat: Spelling s/obsolate/obsolete/g
  SCSI, pmcraid: Fix spelling error in a pmcraid_err() call
  tools/power turbostat: update fields in manpage
  mac80211: drop spelling fix
  types.h: fix comment spelling for 'architectures'
  typo fixes: aera -> area, exntension -> extension
  devices.txt: Fix typo of 'VMware'.
  sis900: Fix enum typo 'sis900_rx_bufer_status'
  decompress_bunzip2: remove invalid vi modeline
  treewide: Fix comment and string typo 'bufer'
  hyper-v: Update MAINTAINERS
  treewide: Fix typos in various parts of the kernel, and fix some comments.
  clockevents: drop unknown Kconfig symbol GENERIC_CLOCKEVENTS_MIGR
  gpio: Kconfig: drop unknown symbol 'CS5535_GPIO'
  leds: Kconfig: Fix typo 'D2NET_V2'
  sound: Kconfig: drop unknown symbol ARCH_CLPS7500
  ...

Fix up trivial conflicts in arch/powerpc/platforms/40x/Kconfig (some new
kconfig additions, close to removed commented-out old ones)
2012-01-08 13:21:22 -08:00
Linus Torvalds 972b2c7199 Merge branch 'for-linus2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
* 'for-linus2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (165 commits)
  reiserfs: Properly display mount options in /proc/mounts
  vfs: prevent remount read-only if pending removes
  vfs: count unlinked inodes
  vfs: protect remounting superblock read-only
  vfs: keep list of mounts for each superblock
  vfs: switch ->show_options() to struct dentry *
  vfs: switch ->show_path() to struct dentry *
  vfs: switch ->show_devname() to struct dentry *
  vfs: switch ->show_stats to struct dentry *
  switch security_path_chmod() to struct path *
  vfs: prefer ->dentry->d_sb to ->mnt->mnt_sb
  vfs: trim includes a bit
  switch mnt_namespace ->root to struct mount
  vfs: take /proc/*/mounts and friends to fs/proc_namespace.c
  vfs: opencode mntget() mnt_set_mountpoint()
  vfs: spread struct mount - remaining argument of next_mnt()
  vfs: move fsnotify junk to struct mount
  vfs: move mnt_devname
  vfs: move mnt_list to struct mount
  vfs: switch pnode.h macros to struct mount *
  ...
2012-01-08 12:19:57 -08:00
Al Viro ece2ccb668 Merge branches 'vfsmount-guts', 'umode_t' and 'partitions' into Z 2012-01-06 23:15:54 -05:00
Linus Torvalds 356b95424c Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: (21 commits)
  m68k/mac: Make CONFIG_HEARTBEAT unavailable on Mac
  m68k/serial: Remove references to obsolete serial config options
  m68k/net: Remove obsolete IRQ_FLG_* users
  m68k: Don't comment out syscalls used by glibc
  m68k/atari: Move declaration of atari_SCC_reset_done to header file
  m68k/serial: Remove references to obsolete CONFIG_SERIAL167
  m68k/hp300: Export hp300_ledstate
  m68k: Initconst section fixes
  m68k/mac: cleanup macro case
  mac_scsi: fix mac_scsi on some powerbooks
  m68k/mac: fix powerbook 150 adb_type
  m68k/mac: fix baboon irq disable and shutdown
  m68k/mac: oss irq fixes
  m68k/mac: fix nubus slot irq disable and shutdown
  m68k/mac: enable via_alt_mapping on performa 580
  m68k/mac: cleanup forward declarations
  m68k/mac: cleanup mac_irq_pending
  m68k/mac: cleanup mac_clear_irq
  m68k/mac: early console
  m68k/mvme16x: Add support for EARLY_PRINTK
  ...

Fix up trivial conflict in arch/m68k/Kconfig.debug due to new
EARLY_PRINTK config option addition clashing with movement of the
BOOTPARAM options.
2012-01-06 18:28:12 -08:00
Michal Simek ba2d5affde block: xsysace: Don't use NO_IRQ
Drivers shouldn't use NO_IRQ. Microblaze and PPC
define NO_IRQ as 0 and this reference will be removed
in near future.

Signed-off-by: Michal Simek <monstr@monstr.eu>
Reviewed-by: Ryan Mallon <rmallon@gmail.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
CC: Rob Herring <rob.herring@calxeda.com>
2012-01-05 08:34:29 +01:00
Jan Beulich 73db144b58 Xen: consolidate and simplify struct xenbus_driver instantiation
The 'name', 'owner', and 'mod_name' members are redundant with the
identically named fields in the 'driver' sub-structure. Rather than
switching each instance to specify these fields explicitly, introduce
a macro to simplify this.

Eliminate further redundancy by allowing the drvname argument to
DEFINE_XENBUS_DRIVER() to be blank (in which case the first entry from
the ID table will be used for .driver.name).

Also eliminate the questionable xenbus_register_{back,front}end()
wrappers - their sole remaining purpose was the checking of the
'owner' field, proper setting of which shouldn't be an issue anymore
when the macro gets used.

v2: Restore DRV_NAME for the driver name in xen-pciback.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-01-04 17:01:17 -05:00
Asai Thambi S P 62ee8c13e2 mtip32xx: do rebuild monitoring asynchronously
Earlier, rebuild monitoring was done in the context of probe. Now the service
thread takes the responsibility of rebuild monitoring, and probe returns good
status.

Signed-off-by: Asai Thambi S P <asamymuthupa@micron.com>
Signed-off-by: Sam Bradshaw <sbradshaw@micron.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-01-04 22:01:32 +01:00
Al Viro 2c9ede55ec switch device_get_devnode() and ->devnode() to umode_t *
both callers of device_get_devnode() are only interested in lower 16bits
and nobody tries to return anything wider than 16bit anyway.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03 22:54:55 -05:00
Al Viro ff01bb4832 fs: move code out of buffer.c
Move invalidate_bdev, block_sync_page into fs/block_dev.c.  Export
kill_bdev as well, so brd doesn't have to open code it.  Reduce
buffer_head.h requirement accordingly.

Removed a rather large comment from invalidate_bdev, as it looked a bit
obsolete to bother moving.  The small comment replacing it says enough.

Signed-off-by: Nick Piggin <npiggin@suse.de>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03 22:54:07 -05:00
Jens Axboe f748040bb8 Merge branch 'stable/for-jens-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen into for-3.3/drivers 2011-12-25 16:46:46 +01:00
Linus Torvalds b0d78ee89c Merge branch 'for-linus' of git://git.kernel.dk/linux-block
* 'for-linus' of git://git.kernel.dk/linux-block:
  block: don't kick empty queue in blk_drain_queue()
  block/swim3: Locking fixes
  loop: Fix discard_alignment default setting
  cfq-iosched: fix cfq_cic_link() race confition
  cfq-iosched: free cic_index if blkio_alloc_blkg_stats fails
  cciss: fix flush cache transfer length
  cciss: Add IRQF_SHARED back in for the non-MSI(X) interrupt handler
  loop: fix loop block driver discard and encryption comment
  block: initialize request_queue's numa node during
2011-12-16 10:05:14 -08:00
Thomas Meyer f094148a17 xen-blkfront: Use kcalloc instead of kzalloc to allocate array
The advantage of kcalloc is, that will prevent integer overflows which could
result from the multiplication of number of elements and size and it is also
a bit nicer to read.

The semantic patch that makes this change is available
in https://lkml.org/lkml/2011/11/25/107

Signed-off-by: Thomas Meyer <thomas@m3y3r.de>
[v1: Seperated the drivers/block/cciss_scsi.c out of this patch]
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-12-16 12:36:52 -05:00
Tejun Heo 1ba64edef6 block, sx8: kill blk_insert_request()
The only user left for blk_insert_request() is sx8 and it can be
trivially switched to use blk_execute_rq_nowait() - special requests
aren't included in io stat and sx8 doesn't use block layer tagging.
Switch sx8 and kill blk_insert_requeset().

This patch doesn't introduce any functional difference.

Only compile tested.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-12-14 00:33:37 +01:00
Linus Torvalds 653f42f6b6 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
  ceph: add missing spin_unlock at ceph_mdsc_build_path()
  ceph: fix SEEK_CUR, SEEK_SET regression
  crush: fix mapping calculation when force argument doesn't exist
  ceph: use i_ceph_lock instead of i_lock
  rbd: remove buggy rollback functionality
  rbd: return an error when an invalid header is read
  ceph: fix rasize reporting by ceph_show_options
2011-12-13 14:59:42 -08:00
Benjamin Herrenschmidt b302545744 block/swim3: Locking fixes
The old PowerMac swim3 driver has some "interesting" locking issues,
using a private lock and failing to lock the queue before completing
requests, which triggered WARN_ONs among others.

This rips out the private lock, makes everything operate under the
block queue lock, and generally makes things simpler.

We used to also share a queue between the two possible instances which
was problematic since we might pick the wrong controller in some cases,
so make the queue and the current request per-instance and use
queuedata to point to our private data which is a lot cleaner.

We still share the queue lock but then, it's nearly impossible to actually
use 2 swim3's simultaneously: one would need to have a Wallstreet
PowerBook, the only machine afaik with two of these on the motherboard,
and populate both hotswap bays with a floppy drive (the machine ships
only with one), so nobody cares...

While at it, add a little fix to clear up stale interrupts when loading
the driver or plugging a floppy drive in a bay.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-12-12 12:42:12 +01:00
Finn Thain ed04c97d51 m68k/mac: cleanup forward declarations
Move some forward declarations into header files and adjust includes.

Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-12-10 19:52:46 +01:00
Josh Durgin 51703306b3 rbd: remove buggy rollback functionality
This doesn't interact with resizing well, since it doesn't set the
size of the device to the size at the snapshot. It's also an expensive
operation to be synchronous. Rollback can still be done with the
userspace rbd tool.

Signed-off-by: Josh Durgin <josh.durgin@dreamhost.com>
2011-12-07 10:46:19 -08:00
Josh Durgin 81e759fbf7 rbd: return an error when an invalid header is read
This protects against opening future rbd images that have incompatible format changes.

Signed-off-by: Josh Durgin <josh.durgin@dreamhost.com>
2011-12-07 10:46:10 -08:00
Justin P. Mattock 42b2aa86c6 treewide: Fix typos in various parts of the kernel, and fix some comments.
The below patch fixes some typos in various parts of the kernel, as well as fixes some comments.
Please let me know if I missed anything, and I will try to get it changed and resent.

Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-12-02 14:57:31 +01:00
Lukas Czerner dfaf3c036c loop: Fix discard_alignment default setting
discard_alignment is not relevant to the loop driver since it is
supposed to be set as a workaround for the old sector 63 alignments.
So set it to zero rather than block size.

Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reported-by: Milan Broz <mbroz@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-12-02 14:47:03 +01:00
Stephen M. Cameron 59bd71a81b cciss: fix flush cache transfer length
We weren't filling in the transfer length of the
flush cache command (it transfers 4 bytes of zeroes).
Firmware didn't seem to be bothered by this, but it
should be fixed.

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-11-28 20:12:05 +01:00
Stephen M. Cameron 6225da4815 cciss: Add IRQF_SHARED back in for the non-MSI(X) interrupt handler
IRQF_SHARED is required for older controllers that don't support MSI(X)
and which may end up sharing an interrupt.

Also remove deprecated IRQF_DISABLED.

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-11-28 20:12:05 +01:00
Dave Young ae95757a90 loop: fix loop block driver discard and encryption comment
The loop driver does not support discard if encryption is enabled,
fix the comment.

Signed-off-by: Dave Young <dyoung@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-11-25 09:41:25 +01:00
Dan Carpenter 3e54a3d1b8 mtip32xx: uninitialized variable in mtip_quiesce_io()
We recently introduce new continue in the loop which make gcc complain.
In theory if MTIP_FLAG_SVC_THD_ACTIVE_BIT is set, we could hit continue
over and over until eventually we time out of the loop.  In that case
"active" should be set as true, but right now it's uninitialized.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-11-24 12:59:00 +01:00
Asai Thambi S P 60ec0eecfa mtip32xx: updates based on feedback
* queue ncq commands when a non-ncq is in progress or error handling is active
* merge variables 'internal_cmd_in_progress' and 'eh_active' into new variable 'flags'
* get rid of read/write semaphore 'internal_sem'
* new service thread to issue queued commands
* use macros from ata.h for command codes
* return ENOTTY for BLKFLSBUF ioctl
* style changes

Signed-off-by: Asai Thambi S P <asamymuthupa@micron.com>
Signed-off-by: Sam Bradshaw <sbradshaw@micron.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-11-23 08:29:24 +01:00
Li Dongyang ae18be11b5 xen-blkback: convert hole punching to discard request on loop devices
As of dfaa2ef68e, loop devices support
discard request now. We could just issue a discard request, and
the loop driver will punch the hole for us, so we don't need to touch
the internals of loop device and punch the hole ourselves, Thanks.

V0->V1: rebased on devel/for-jens-3.3

Signed-off-by: Li Dongyang <lidongyang@novell.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-11-18 13:28:05 -05:00
Konrad Rzeszutek Wilk 421463526f xen/blkback: Move processing of BLKIF_OP_DISCARD from dispatch_rw_block_io
.. and move it to its own function that will deal with the
discard operation.

Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-11-18 13:28:03 -05:00
Konrad Rzeszutek Wilk 5ea4298669 xen/blk[front|back]: Enhance discard support with secure erasing support.
Part of the blkdev_issue_discard(xx) operation is that it can also
issue a secure discard operation that will permanantly remove the
sectors in question. We advertise that we can support that via the
'discard-secure' attribute and on the request, if the 'secure' bit
is set, we will attempt to pass in REQ_DISCARD | REQ_SECURE.

CC: Li Dongyang <lidongyang@novell.com>
[v1: Used 'flag' instead of 'secure:1' bit]
[v2: Use 'reserved' uint8_t instead of adding a new value]
[v3: Check for nseg when mapping instead of operation]
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-11-18 13:28:01 -05:00
Konrad Rzeszutek Wilk 97e36834f5 xen/blk[front|back]: Squash blkif_request_rw and blkif_request_discard together
In a union type structure to deal with the overlapping
attributes in a easier manner.

Suggested-by: Ian Campbell <Ian.Campbell@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-11-18 13:27:59 -05:00
Dan Carpenter a2c2a0e668 paride: fix potential information leak in pg_read()
Smatch has a new check for Rosenberg type information leaks where structs
are copied to the user with uninitialized stack data in them.  i In this
case, the pg_write_hdr struct has a hole in it.

struct pg_write_hdr {
        char                       magic;                /*     0     1 */
        char                       func;                 /*     1     1 */
        /* XXX 2 bytes hole, try to pack */
        int                        dlen;                 /*     4     4 */

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Tim Waugh <tim@cyberelk.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-11-16 09:21:50 +01:00
Stephen M. Cameron 0007a4c90a cciss: auto engage SCSI mid layer at driver load time
A long time ago, probably in 2002, one of the distros, or maybe more than
one, loaded block drivers prior to loading the SCSI mid layer.  This meant
that the cciss driver, being a block driver, could not engage the SCSI mid
layer at init time without panicking, and relied on being poked by a
userland program after the system was up (and the SCSI mid layer was
therefore present) to engage the SCSI mid layer.

This is no longer the case, and cciss can safely rely on the SCSI mid
layer being present at init time and engage the SCSI mid layer straight
away.  This means that users will see their tape drives and medium
changers at driver load time without need for a script in /etc/rc.d that
does this:

for x in /proc/driver/cciss/cciss*
do
	echo "engage scsi" > $x
done

However, if no tape drives or medium changers are detected, the SCSI mid
layer will not be engaged.  If a tape drive or medium change is later
hot-added to the system it will then be necessary to use the above script
or similar for the device(s) to be acceesible.

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-11-16 09:21:49 +01:00
Dmitry Monakhov 7035b5df3c loop: cleanup set_status interface
1) Anyone who has read access to loopdev has permission to call set_status
   and may change important parameters such as lo_offset, lo_sizelimit and
   so on, which contradicts to read access pattern and definitely equals
   to write access pattern.
2) Add lo_offset over i_size check to prevent blkdev_size overflow.
   ##Testcase_bagin
   #dd if=/dev/zero of=./file bs=1k count=1
   #losetup /dev/loop0 ./file
   /* userspace_application */
   struct loop_info64 loinf;
   fd = open("/dev/loop0", O_RDONLY);
   ioctl(fd, LOOP_GET_STATUS64, &loinf);
   /* Set offset to any value which is bigger than i_size, and sizelimit
    * to nonzero value*/
   loinf.lo_offset = 4096*1024;
   loinf.lo_sizelimit = 1024;
   ioctl(fd, LOOP_SET_STATUS64, &loinf);
   /* After this loop device will have size similar to 0x7fffffffffxxxx */
   #blockdev --getsz /dev/loop0
   ##OUTPUT: 36028797018955968
   ##Testcase_end

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-11-16 09:21:49 +01:00
Dmitry Monakhov 3bb9068278 loop: prevent information leak after failed read
If read was not fully successful we have to fail whole bio to prevent
information leak of old pages

##Testcase_begin
dd if=/dev/zero of=./file bs=1M count=1
losetup /dev/loop0 ./file -o 4096
truncate -s 0 ./file
# OOps loop offset is now beyond i_size, so read will silently fail.
# So bio's pages would not be cleared, may which result in information leak.
hexdump -C /dev/loop0
##testcase_end

Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-11-16 09:21:48 +01:00
Matthew Garrett 1937335856 The Windows driver .inf disables ASPM on all cciss devices. Do the same.
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Cc: iss_storagedev@hp.com
Acked-by: Mike Miller <mike.miller@hp.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-11-11 22:05:54 +01:00
Linus Torvalds 32aaeffbd4 Merge branch 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux
* 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: (230 commits)
  Revert "tracing: Include module.h in define_trace.h"
  irq: don't put module.h into irq.h for tracking irqgen modules.
  bluetooth: macroize two small inlines to avoid module.h
  ip_vs.h: fix implicit use of module_get/module_put from module.h
  nf_conntrack.h: fix up fallout from implicit moduleparam.h presence
  include: replace linux/module.h with "struct module" wherever possible
  include: convert various register fcns to macros to avoid include chaining
  crypto.h: remove unused crypto_tfm_alg_modname() inline
  uwb.h: fix implicit use of asm/page.h for PAGE_SIZE
  pm_runtime.h: explicitly requires notifier.h
  linux/dmaengine.h: fix implicit use of bitmap.h and asm/page.h
  miscdevice.h: fix up implicit use of lists and types
  stop_machine.h: fix implicit use of smp.h for smp_processor_id
  of: fix implicit use of errno.h in include/linux/of.h
  of_platform.h: delete needless include <linux/module.h>
  acpi: remove module.h include from platform/aclinux.h
  miscdevice.h: delete unnecessary inclusion of module.h
  device_cgroup.h: delete needless include <linux/module.h>
  net: sch_generic remove redundant use of <linux/module.h>
  net: inet_timewait_sock doesnt need <linux/module.h>
  ...

Fix up trivial conflicts (other header files, and  removal of the ab3550 mfd driver) in
 - drivers/media/dvb/frontends/dibx000_common.c
 - drivers/media/video/{mt9m111.c,ov6650.c}
 - drivers/mfd/ab3550-core.c
 - include/linux/dmaengine.h
2011-11-06 19:44:47 -08:00
Linus Torvalds 06d381484f Merge branch 'stable/vmalloc-3.2' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen
* 'stable/vmalloc-3.2' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  net: xen-netback: use API provided by xenbus module to map rings
  block: xen-blkback: use API provided by xenbus module to map rings
  xen: use generic functions instead of xen_{alloc, free}_vm_area()
2011-11-06 18:31:36 -08:00
Jens Axboe a71f483d79 mtip32xx: update to new ->make_request() API
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-11-05 08:36:21 +01:00
Jens Axboe 0e838c624e mtip32xx: add module.h include to avoid conflict with moduleh tree
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-11-05 08:35:10 +01:00
Jens Axboe 3ff147d3a8 mtip32xx: mark a few more items static
Missed two items: mtip_major, and mtip_pci_driver.

Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-11-05 08:35:10 +01:00
Jens Axboe 6316668fbc mtip32xx: ensure that all local functions are static
Kill the declarations in the header file and mark them as static.
Reshuffle a few functions to ensure that everything is properly
declared before being used.

Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-11-05 08:35:10 +01:00
Jens Axboe ef0f158734 mtip32xx: cleanup compat ioctl handling
Do the conversion/copy up front instead of passing in a compat flag
to the ioctl handler and subsequently to the exec_drive_taskfile()
function.

Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-11-05 08:35:10 +01:00
Jens Axboe 16d02c040b mtip32xx: fix warnings/errors on 32-bit compiles
We need to clean up the compat ioctl handling, but this makes it
work for now at least.

Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-11-05 08:35:10 +01:00
Sam Bradshaw 88523a6155 block: Add driver for Micron RealSSD pcie flash cards
This adds mtip32xx, a driver supporting Microns line of
pci-express flash storage cards.

Signed-off-by: Asai Thambi S P <asamymuthupa@micron.com>
Signed-off-by: Sam Bradshaw <sbradshaw@micron.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-11-05 08:35:10 +01:00
Linus Torvalds 3d0a8d10cf Merge branch 'for-3.2/drivers' of git://git.kernel.dk/linux-block
* 'for-3.2/drivers' of git://git.kernel.dk/linux-block: (30 commits)
  virtio-blk: use ida to allocate disk index
  hpsa: add small delay when using PCI Power Management to reset for kump
  cciss: add small delay when using PCI Power Management to reset for kump
  xen/blkback: Fix two races in the handling of barrier requests.
  xen/blkback: Check for proper operation.
  xen/blkback: Fix the inhibition to map pages when discarding sector ranges.
  xen/blkback: Report VBD_WSECT (wr_sect) properly.
  xen/blkback: Support 'feature-barrier' aka old-style BARRIER requests.
  xen-blkfront: plug device number leak in xlblk_init() error path
  xen-blkfront: If no barrier or flush is supported, use invalid operation.
  xen-blkback: use kzalloc() in favor of kmalloc()+memset()
  xen-blkback: fixed indentation and comments
  xen-blkfront: fix a deadlock while handling discard response
  xen-blkfront: Handle discard requests.
  xen-blkback: Implement discard requests ('feature-discard')
  xen-blkfront: add BLKIF_OP_DISCARD and discard request struct
  drivers/block/loop.c: remove unnecessary bdev argument from loop_clr_fd()
  drivers/block/loop.c: emit uevent on auto release
  drivers/block/cpqarray.c: use pci_dev->revision
  loop: always allow userspace partitions and optionally support automatic scanning
  ...

Fic up trivial header file includsion conflict in drivers/block/loop.c
2011-11-04 17:22:14 -07:00
Linus Torvalds b4fdcb02f1 Merge branch 'for-3.2/core' of git://git.kernel.dk/linux-block
* 'for-3.2/core' of git://git.kernel.dk/linux-block: (29 commits)
  block: don't call blk_drain_queue() if elevator is not up
  blk-throttle: use queue_is_locked() instead of lockdep_is_held()
  blk-throttle: Take blkcg->lock while traversing blkcg->policy_list
  blk-throttle: Free up policy node associated with deleted rule
  block: warn if tag is greater than real_max_depth.
  block: make gendisk hold a reference to its queue
  blk-flush: move the queue kick into
  blk-flush: fix invalid BUG_ON in blk_insert_flush
  block: Remove the control of complete cpu from bio.
  block: fix a typo in the blk-cgroup.h file
  block: initialize the bounce pool if high memory may be added later
  block: fix request_queue lifetime handling by making blk_queue_cleanup() properly shutdown
  block: drop @tsk from attempt_plug_merge() and explain sync rules
  block: make get_request[_wait]() fail if queue is dead
  block: reorganize throtl_get_tg() and blk_throtl_bio()
  block: reorganize queue draining
  block: drop unnecessary blk_get/put_queue() in scsi_cmd_ioctl() and blk_get_tg()
  block: pass around REQ_* flags instead of broken down booleans during request alloc/free
  block: move blk_throtl prototypes to block/blk.h
  block: fix genhd refcounting in blkio_policy_parse_and_set()
  ...

Fix up trivial conflicts due to "mddev_t" -> "struct mddev" conversion
and making the request functions be of type "void" instead of "int" in
 - drivers/md/{faulty.c,linear.c,md.c,md.h,multipath.c,raid0.c,raid1.c,raid10.c,raid5.c}
 - drivers/staging/zram/zram_drv.c
2011-11-04 17:06:58 -07:00
Matthew Wilcox f1938f6e1e NVMe: Implement doorbell stride capability
The doorbell stride allows devices to spread out their doorbells instead
of packing them tightly.  This feature was added as part of ECN 003.

This patch also enables support for more than 512 queues :-)

Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2011-11-04 15:53:05 -04:00
Matthew Wilcox ce38c14957 NVMe: Version 0.7
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2011-11-04 15:53:05 -04:00
Matthew Wilcox 2b2c189687 NVMe: Don't probe namespace 0
ECN 001 documented that namespace 0 is not valid.  Sending an Identify
with CNS of 0 and Namespace of 0 is an undefined command.

Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2011-11-04 15:53:04 -04:00
Nisheeth Bhat 0d1bc91258 Fix calculation of number of pages in a PRP List
The existing calculation underestimated the number of pages required
as it did not take into account the pointer at the end of each page.
The replacement calculation may overestimate the number of pages required
if the last page in the PRP List is entirely full.  By using ->npages
as a counter as we fill in the pages, we ensure that we don't try to
free a page that was never allocated.

Signed-off-by: Nisheeth Bhat <nisheeth.bhat@intel.com>
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2011-11-04 15:53:04 -04:00
Matthew Wilcox bc5fc7e4b2 NVMe: Create nvme_identify and nvme_get_features functions
Instead of open-coding calls to nvme_submit_admin_cmd, these
small wrappers are simpler to use (the patch removes 14 lines from
nvme_dev_add() for example).

Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2011-11-04 15:53:04 -04:00
Matthew Wilcox 684f5c2025 NVMe: Fix memory leak in nvme_dev_add()
The driver was allocating 8k of memory, then freeing 4k of it.

Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2011-11-04 15:53:04 -04:00
Nisheeth Bhat d1a490e026 NVMe: Fix calls to dma_unmap_sg
dma_unmap_sg() must be called with the same 'nents' passed to
dma_map_sg(), not the number returned from dma_map_sg().

Signed-off-by: Nisheeth Bhat <nisheeth.bhat@intel.com>
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2011-11-04 15:53:04 -04:00
Matthew Wilcox d0ba1e497b NVMe: Correct sg list setup in nvme_map_user_pages
Our SG list was constructed to always fill the entire first page, even
if that was more than the length of the I/O.  This is probably harmless,
but some IOMMUs might do something bad.

Correcting the first call to sg_set_page() made it look a lot closer to
the sg_set_page() in the loop, so fold the first call to sg_set_page()
into the loop.

Reported-by: Nisheeth Bhat <nisheeth.bhat@intel.com>
Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
2011-11-04 15:53:04 -04:00
Matthew Wilcox 6413214c5d Fix bug in NVME_IOCTL_SUBMIT_IO
Missing 'break' in the switch statement meant that we'd fall through
to the 'return -EINVAL' case.
2011-11-04 15:53:04 -04:00
Matthew Wilcox 6bbf1acdde NVMe: Rework ioctls
Remove the special-purpose IDENTIFY, GET_RANGE_TYPE, DOWNLOAD_FIRMWARE
and ACTIVATE_FIRMWARE commands.  Replace them with a generic ADMIN_CMD
ioctl that can submit any admin command.

Add a new ID ioctl that returns the namespace ID of the queried device.
It corresponds to the SCSI Idlun ioctl.

Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2011-11-04 15:53:03 -04:00
Matthew Wilcox eac623ba7a NVMe: Add the nvme thread to the wait queue before waking it up
If the I/O was not completed by a single NVMe command, we add the
bio to the congestion list and wake up the kthread to resubmit it.
But the kthread calls remove_wait_queue() unconditionally, which
will oops if it's not on the wait queue.  So add the kthread to
the wait queue before waking it up.

Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2011-11-04 15:53:03 -04:00
Matthew Wilcox 6f0f54499f NVMe: Return real error from nvme_create_queue
nvme_setup_io_queues() was assuming that a NULL return from
nvme_create_queue() was an out-of-memory error.  That's not necessarily
true; the adapter might return -EIO, for example.  Change the calling
convention to return an ERR_PTR on failure instead of NULL.

Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2011-11-04 15:53:03 -04:00
Matthew Wilcox be5e094840 NVMe: Version 0.6
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2011-11-04 15:53:03 -04:00
Matthew Wilcox 184d2944cb NVMe: Add a few calling convention notes
For the benefit of reviewers, add comments to a few functions describing
their calling context

Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2011-11-04 15:53:03 -04:00
Matthew Wilcox b77954cbdd NVMe: Handle failures from memory allocations in nvme_setup_prps
If any of the memory allocations in nvme_setup_prps fail, handle it by
modifying the passed-in data length to reflect the number of bytes we are
actually able to send.  Also allow the caller to specify the GFP flags
they need; for user-initiated commands, we can use GFP_KERNEL allocations.

The various callers are updated to handle this possibility; the main
I/O path is already prepared for this possibility (as it may happen
due to nvme_map_bio being unable to map all the segments of the I/O).
The other callers return -ENOMEM instead of doing partial I/Os.

Reported-by: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2011-11-04 15:53:03 -04:00
Matthew Wilcox 5aff9382dd NVMe: Use an IDA to allocate minor numbers
The current approach of using the namespace ID as the minor number
doesn't work when there are multiple adapters in the machine.  Rather
than statically partitioning the number of namespaces between adapters,
dynamically allocate minor numbers to namespaces as they are detected.

Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2011-11-04 15:53:03 -04:00
Matthew Wilcox fd63e9ceee NVMe: Add include of delay.h for msleep
Previously it was being implicitly included through some other header file

Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2011-11-04 15:53:02 -04:00
Matthew Wilcox 8de055350f NVMe: Add support for timing out I/Os
In the kthread, walk the list of outstanding I/Os and check they've not
hit the timeout.

Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2011-11-04 15:53:02 -04:00
Matthew Wilcox 21075bdee0 NVMe: Rename cancel_cmdid_data to cancel_cmdid
The trailing '_data' on the end was annoying and inconsistent.  Also, make
it actually return the data since this is needed for timing out commands.

Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2011-11-04 15:53:02 -04:00
Matthew Wilcox 09a58f5364 NVMe: Fix bug in error handling
When an I/O completed with an error, we would call bio_endio twice
(once with -EIO and once with 0).  Found by inspection.

Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2011-11-04 15:53:02 -04:00
Matthew Wilcox 22605f9681 NVMe: Time out initialisation after a few seconds
THe device reports (in its capability register) how long it will take
to initialise.  If that time elapses before the ready bit becomes set,
conclude the device is broken and refuse to initialise it.  Log a nice
error message so the user knows why we did nothing.

Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2011-11-04 15:53:02 -04:00
Matthew Wilcox aba2080f3f NVMe: Fix warning in free_irq
We need to clear the affinity mask before calling free_irq()

Reported-by: Shane Michael Matthews <shane.matthews@intel.com>
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2011-11-04 15:53:02 -04:00
Matthew Wilcox 7f53f9d242 NVMe: Correct the Controller Configuration settings
The arbitration field was extended by one bit, shifting the shutdown
notification bits by one.  Also, the SQ/CQ entry size was made
configurable for future extensions.

Reported-by: Paul Luse <paul.e.luse@intel.com>
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2011-11-04 15:53:01 -04:00
Matthew Wilcox 8ef700678f NVMe: Version 0.5
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2011-11-04 15:53:01 -04:00
Matthew Wilcox 6c7d49455c NVMe: Change the definition of nvme_user_io
The read and write commands don't define a 'result', so there's no need
to copy it back to userspace.

Remove the ability of the ioctl to submit commands to a different
namespace; it's just asking for trouble, and the use case I have in mind
will be addressed througha  different ioctl in the future.  That removes
the need for both the block_shift and nsid arguments.

Check that the opcode is one of 'read' or 'write'.  Future opcodes may
be added in the future, but we will need a different structure definition
for them.

The nblocks field is redefined to be 0-based.  This allows the user to
request the full 65536 blocks.

Don't byteswap the reftag, apptag and appmask.  Martin Petersen tells
me these are calculated in big-endian and are transmitted to the device
in big-endian.

Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2011-11-04 15:53:01 -04:00
Matthew Wilcox 4948168280 NVMe: Add compat_ioctl
Make ioctls work for 32-bit applications on 64-bit kernels.  The structures
are defined to be the same for both 32- and 64-bit applications, so
we can use the same handler for both.

Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2011-11-04 15:53:01 -04:00
Matthew Wilcox 9ecdc94621 NVMe: Simplify queue lookup
Fill in all the num_possible_cpus() entries with duplicate pointers.
This reduces the complexity of the frequently-called get_nvmeq(), as
well as avoiding a bug in it when there are fewer queues than CPUs.

Reported-by: Shane Michael Matthews <shane.matthews@intel.com>
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2011-11-04 15:53:01 -04:00
Matthew Wilcox 3cb967c039 NVMe: Remove the kthread from the wait queue
Once there are no more bios on the congestion list, we can stop waking
up the nvme kthread every time a completion happens.

Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2011-11-04 15:53:00 -04:00
Matthew Wilcox 7523d834dd NVMe: Fix off-by-one when filling in PRP lists
If the last element in the PRP list fits on the end of the page, there's
no need to allocate an extra page to put that single element in.  It can
fit on the end of the page.

Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2011-11-04 15:53:00 -04:00
Matthew Wilcox ac88c36a38 NVMe: Fix interpretation of 'Number of Namespaces' field
The spec says this is a 0s based value.  We don't need to handle the
maximal value because it's reserved to mean "every namespace".

Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2011-11-04 15:53:00 -04:00
Matthew Wilcox 19e899b2f9 NVMe: Remove outdated comments
The head can never overrun the tail since we won't allocate enough command
IDs to let that happen.  The status codes are in sync with the spec.

Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2011-11-04 15:53:00 -04:00
Matthew Wilcox fa92282149 NVMe: Fix comment formatting
Reported-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2011-11-04 15:53:00 -04:00
Matthew Wilcox 714a7a2288 NVMe: Convert comments to kernel-doc notation
Reported-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2011-11-04 15:53:00 -04:00
Matthew Wilcox b57ab0fada NVMe: Version 0.4
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2011-11-04 15:52:59 -04:00
Matthew Wilcox e6d15f79f9 NVMe: Reduce maximum queue depth by 1
The spec says we're not allowed to completely fill the submission queue.
Solve this by reducing the number of allocatable cmdids by 1.

Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2011-11-04 15:52:59 -04:00
Matthew Wilcox d8ee9d69f2 NVMe: Fix discontiguous accesses
When we submit subsequent portions of the I/O, we need to access the
updated block, not start reading again from the original position.
This was showing up as miscompares in the XFS randholes testcase.

Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2011-11-04 15:52:59 -04:00
Matthew Wilcox 1ad2f8932a NVMe: Handle bios that contain non-virtually contiguous addresses
NVMe scatterlists must be virtually contiguous, like almost all I/Os.
However, when the filesystem lays out files with a hole, it can be that
adjacent LBAs map to non-adjacent virtual addresses.  Handle this by
submitting one NVMe command at a time for each virtually discontiguous
range.

Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2011-11-04 15:52:59 -04:00
Matthew Wilcox 00df5cb4eb NVMe: Implement Flush
Linux implements Flush as a bit in the bio.  That means there may also be
data associated with the flush; if so the flush should be sent before the
data.  To avoid completing the bio twice, I add CMD_CTX_FLUSH to indicate
the completion routine should do nothing.

Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2011-11-04 15:52:59 -04:00
Matthew Wilcox c42705592b NVMe: Mark CMD_CTX_CANCELLED as being unlikely
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2011-11-04 15:52:59 -04:00
Matthew Wilcox 7547881d09 NVMe: Correct SQ doorbell semantics
The value written to the doorbell needs to be the first free index in
the queue, not the most recently used index in the queue.

Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2011-11-04 15:52:58 -04:00
Matthew Wilcox 740216fc59 NVMe: Let the kthread take care of devices earlier
If interrupts are misconfigured, the kthread will be needed to process
admin queue completions.

Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2011-11-04 15:52:58 -04:00
Matthew Wilcox b348b7d543 NVMe: Rename nr_queues to nr_io_queues
I got confused about whether this included the admin queue or not, and
had to resort to reading the spec.  It doesn't include the admin queue,
so make that clear in the name.

Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2011-11-04 15:52:58 -04:00
Matthew Wilcox ca1615424c NVMe: Remove setting of 'flags' in rw command
This was the data transfer bit until spec rev 0.92

Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2011-11-04 15:52:58 -04:00
Matthew Wilcox ad8a5df97c NVMe: Release 0.3
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2011-11-04 15:52:58 -04:00
Matthew Wilcox 1fa6aeadf1 NVMe: Add a kthread to handle the congestion list
Instead of trying to resubmit I/Os in the I/O completion path (in
interrupt context), wake up a kthread which will resubmit I/O from
user context.  This allows mke2fs to run to completion.

Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2011-11-04 15:52:58 -04:00
Matthew Wilcox eeee322647 NVMe: Handle failures differently in nvme_submit_bio_queue()
Return -EBUSY if the queue is full or -ENOMEM if we failed to allocate
memory (or map a scatterlist).  Also use GFP_ATOMIC to allocate the
nvme_bio and move the locking to the callers of nvme_submit_bio_queue().

In nvme_make_request(), don't permit an I/O to jump the queue -- if the
congestion list already has an entry, just add to the tail, rather than
trying to submit.

Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2011-11-04 15:52:58 -04:00
Matthew Wilcox 768308400f NVMe: Handle physical merging of bvec entries
In order to not overrun the sg array, we have to merge physically
contiguous pages into a single sg entry.

Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2011-11-04 15:52:57 -04:00
Matthew Wilcox 1974b1ae88 NVMe: Check for DMA mapping failure
If dma_map_sg returns 0 (failure), we need to fail the I/O.

Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2011-11-04 15:52:57 -04:00
Matthew Wilcox d567760c40 NVMe: Pass the nvme_dev to nvme_free_prps and nvme_setup_prps
We were passing the nvme_queue to access the q_dmadev for the
dma_alloc_coherent calls, but since we moved to the dma pool API,
we really only need the nvme_dev.

Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2011-11-04 15:52:57 -04:00
Matthew Wilcox 99802a7aee NVMe: Optimise memory usage for I/Os between 4k and 128k
Add a second memory pool for smaller I/Os.  We can pack 16 of these on a
single page instead of using an entire page for each one.

Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2011-11-04 15:52:57 -04:00
Matthew Wilcox 091b609258 NVMe: Switch to use DMA Pool API
Calling dma_free_coherent from interrupt context causes warnings.
Using the DMA pools delays freeing until pool destruction, so avoids
the problem.

Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2011-11-04 15:52:57 -04:00
Matthew Wilcox d534df3c73 NVMe: Rename nvme_req_info to nvme_bio
There are too many things called 'info' in this driver.  This data
structure is auxiliary information for a struct bio, so call it nvme_bio,
or nbio when used as a variable.

Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2011-11-04 15:52:56 -04:00
Shane Michael Matthews e025344c56 NVMe: Initial PRP List support
Add a pointer to the nvme_req_info to hold a new data structure
(nvme_prps) which contains a list of the pages allocated to this
particular request for holding PRP list entries.  nvme_setup_prps()
now returns this pointer.

To allocate and free the memory used for PRP lists, we need a struct
device, so we need to pass the nvme_queue pointer to many functions
which didn't use to need it.

Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2011-11-04 15:52:56 -04:00
Matthew Wilcox 51882d00f0 NVMe: Advance the sg pointer when filling in an sg list
For multipage BIOs, we were always using sg[0] instead of advancing
through the list.  Oops :-)

Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2011-11-04 15:52:56 -04:00
Matthew Wilcox d2d8703481 NVMe: Renumber the special context values
If POISON_POINTER_DELTA isn't defined, ensure they're in page 0 which
should never be mapped.

Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2011-11-04 15:52:56 -04:00
Matthew Wilcox 9294bbed78 NVMe: Handle the congestion list a little better
In the bio completion handler, check for bios on the congestion list
for this NVM queue.  Also, lock the congestion list in the make_request
function as the queue may end up being shared between multiple CPUs.

Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2011-11-04 15:52:56 -04:00
Matthew Wilcox e85248e516 NVMe: Record the timeout for each command
In addition to recording the completion data for each command, record
the anticipated completion time.  Choose a timeout of 5 seconds for
normal I/Os and 60 seconds for admin I/Os.

Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2011-11-04 15:52:56 -04:00
Matthew Wilcox ec6ce618d6 NVMe: Need to lock queue during interrupt handling
If we're sharing a queue between multiple CPUs and we cancel a sync I/O,
we must have the queue locked to avoid corrupting the stack of the thread
that submitted the I/O.  It turns out this is the same locking that's needed
for the threaded irq handler, so share that code.

Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2011-11-04 15:52:56 -04:00
Matthew Wilcox 48e3d39816 NVMe: Detect command IDs completing that are out of range
If the adapter completes a command ID that is outside the bounds of
the array, return CMD_CTX_INVALID instead of random data, and print a
message in the sync_completion handler (which is rapidly becoming the
misc completion handler :-)

Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2011-11-04 15:52:55 -04:00
Matthew Wilcox b36235df01 NVMe: Detect commands that are completed twice
Set the context value to CMD_CTX_COMPLETED, and print a message in the
sync_completion handler if we see it.

Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2011-11-04 15:52:55 -04:00
Matthew Wilcox be7b62754e NVMe: Use a symbolic name to represent cancelled commands instead of 0
I have plans for other special values in sync_completion.  Plus, this
is more self-documenting, and lets us detect bogus usages.

Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2011-11-04 15:52:55 -04:00
Matthew Wilcox 58ffacb545 NVMe: Add a module parameter to use a threaded interrupt
We're currently calling bio_endio from hard interrupt context.  This is
not a good idea for preemptible kernels as it will cause longer latencies.
Using a threaded interrupt will run the entire queue processing mechanism
(including bio_endio) in a thread, which can be preempted.  Unfortuantely,
it also adds about 7us of latency to the single-I/O case, so make it a
module parameter for the moment.

Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2011-11-04 15:52:55 -04:00
Matthew Wilcox b1ad37efca NVMe: Call put_nvmeq() before calling nvme_submit_sync_cmd()
We can't have preemption disabled when we call schedule().  Accept the
possibility that we'll get preempted, and it'll cost us some cacheline
bounces.

Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2011-11-04 15:52:55 -04:00
Matthew Wilcox 3c0cf138d7 NVMe: Allow fatal signals to interrupt I/O
If the user sends a fatal signal, sleeping in the TASK_KILLABLE state
permits the task to be aborted.  The only wrinkle is making sure that
if/when the command completes later that it doesn't upset anything.
Handle this by setting the data pointer to 0, and checking the value
isn't NULL in the sync completion path.  Eventually, bios can be cancelled
through this path too.  Note that the cmdid isn't freed to prevent reuse.

We should also abort the command in the future, but this is a good start.

Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2011-11-04 15:52:55 -04:00
Matthew Wilcox db5d0c198d NVMe: Release 0.2
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2011-11-04 15:52:54 -04:00
Matthew Wilcox 6ee44cdced NVMe: Add download / activate firmware ioctls
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2011-11-04 15:52:54 -04:00
Matthew Wilcox 388f037f4e NVMe: Move sysfs entries to the right place
Because I wasn't setting driverfs_dev, the devices were showing up under
/sys/devices/virtual/block.  Now they appear underneath the PCI device
which they belong to.

Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2011-11-04 15:52:54 -04:00
Shane Michael Matthews 5911f20039 NVMe: Disable the device before we write the admin queues
In case the card has been left in a partially-configured state,
write 0 to the Enable bit.

Signed-off-by: Shane Michael Matthews <shane.matthews@intel.com>
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2011-11-04 15:52:54 -04:00
Matthew Wilcox 574e8b95bc NVMe: Request I/O regions
Calling pci_request_selected_regions() reserves these regions for our use.

Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2011-11-04 15:52:54 -04:00
Matthew Wilcox 2930353f9f NVMe: Allow queues to be allocated above 4GB
Need to call dma_set_coherent_mask() to allow queues to be allocated
above 4GB.

Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2011-11-04 15:52:53 -04:00
Matthew Wilcox f64d3365a3 NVMe: Enable device DMA
Need to call pci_set_master() to enable device DMA

Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2011-11-04 15:52:53 -04:00