When transmitting data, call down into TCP using a single sendmsg with
MSG_SPLICE_PAGES to indicate that content should be spliced.
To make this work, the data is assembled in a bio_vec array and attached to
a BVEC-type iterator.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Santosh Shilimkar <santosh.shilimkar@oracle.com>
cc: Jens Axboe <axboe@kernel.dk>
cc: Matthew Wilcox <willy@infradead.org>
cc: rds-devel@oss.oracle.com
Link: https://lore.kernel.org/r/20230623225513.2732256-6-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use sendmsg() and MSG_SPLICE_PAGES rather than sendpage in ceph when
transmitting data. For the moment, this can only transmit one page at a
time because of the architecture of net/ceph/, but if
write_partial_message_data() can be given a bvec[] at a time by the
iteration code, this would allow pages to be sent in a batch.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Ilya Dryomov <idryomov@gmail.com>
cc: Xiubo Li <xiubli@redhat.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: Jens Axboe <axboe@kernel.dk>
cc: Matthew Wilcox <willy@infradead.org>
Link: https://lore.kernel.org/r/20230623225513.2732256-5-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use sendmsg() and MSG_SPLICE_PAGES rather than sendpage in ceph when
transmitting data. For the moment, this can only transmit one page at a
time because of the architecture of net/ceph/, but if
write_partial_message_data() can be given a bvec[] at a time by the
iteration code, this would allow pages to be sent in a batch.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Ilya Dryomov <idryomov@gmail.com>
cc: Xiubo Li <xiubli@redhat.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: Jens Axboe <axboe@kernel.dk>
cc: Matthew Wilcox <willy@infradead.org>
Link: https://lore.kernel.org/r/20230623225513.2732256-4-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use sendmsg() with MSG_SPLICE_PAGES rather than sendpage in
skb_send_sock(). This causes pages to be spliced from the source iterator
if possible.
This allows ->sendpage() to be replaced by something that can handle
multiple multipage folios in a single transaction.
Note that this could perhaps be improved to fill out a bvec array with all
the frags and then make a single sendmsg call, possibly sticking the header
on the front also.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Jens Axboe <axboe@kernel.dk>
cc: Matthew Wilcox <willy@infradead.org>
Link: https://lore.kernel.org/r/20230623225513.2732256-3-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As MSG_SENDPAGE_NOTLAST is being phased out along with sendpage(), don't
use it further in than the sendpage methods, but rather translate it to
MSG_MORE and use that instead.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
cc: Bernard Metzler <bmt@zurich.ibm.com>
cc: Jason Gunthorpe <jgg@ziepe.ca>
cc: Leon Romanovsky <leon@kernel.org>
cc: John Fastabend <john.fastabend@gmail.com>
cc: Jakub Sitnicki <jakub@cloudflare.com>
cc: David Ahern <dsahern@kernel.org>
cc: Karsten Graul <kgraul@linux.ibm.com>
cc: Wenjia Zhang <wenjia@linux.ibm.com>
cc: Jan Karcher <jaka@linux.ibm.com>
cc: "D. Wythe" <alibuda@linux.alibaba.com>
cc: Tony Lu <tonylu@linux.alibaba.com>
cc: Wen Gu <guwen@linux.alibaba.com>
cc: Boris Pismenny <borisp@nvidia.com>
cc: Steffen Klassert <steffen.klassert@secunet.com>
cc: Herbert Xu <herbert@gondor.apana.org.au>
Link: https://lore.kernel.org/r/20230623225513.2732256-2-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* Support for active scans
* Support for answering BEACON_REQ
* Specific MLME handling for limited devices
WPAN driver changes:
* ca8210:
- Flag the devices as limited
- Remove stray gpiod_unexport() call
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEE9HuaYnbmDhq/XIDIJWrqGEe9VoQFAmSV2A0ACgkQJWrqGEe9
VoSFxgf+MH6U+kmOU9rAikG12t+qTVBKzUkxUgCXcNKSb8oo2/5xF4jWpPd0Oa0W
Ztneu7N/1o8FFTLJiI5l0KkidU2Nq9jBgYJPZPBen1TucrDapyMvQ1UzfA3LF8Vj
rnBWXiz9oDWAg33KuSGZwgagvYe+UawQTzsvM+HKfai5VMyCzno0oJ8RXAJ/6jgY
GkB9e3I5nkZUT9wVzeFKQXEnqGRjZRS2WoC/a76fRz0larGoVeHY3IWWCkQYamU6
vro18m2yiv/DkZaT5L0YQlYJ8LWojkaCgUVmJlP/9ngMO9WXqriVytMJBpcmFIhp
1us6PVS5ue65C1aVS3uHQSe47WM0SA==
=sP6V
-----END PGP SIGNATURE-----
Merge tag 'ieee802154-for-net-next-2023-06-23' of gitolite.kernel.org:pub/scm/linux/kernel/git/wpan/wpan-next
Miquel Raynal says:
====================
Core WPAN changes:
- Support for active scans
- Support for answering BEACON_REQ
- Specific MLME handling for limited devices
WPAN driver changes:
- ca8210:
- Flag the devices as limited
- Remove stray gpiod_unexport() call
* tag 'ieee802154-for-net-next-2023-06-23' of gitolite.kernel.org:pub/scm/linux/kernel/git/wpan/wpan-next:
ieee802154: ca8210: Remove stray gpiod_unexport() call
ieee802154: ca8210: Flag the driver as being limited
net: ieee802154: Handle limited devices with only datagram support
mac802154: Handle received BEACON_REQ
ieee802154: Add support for allowing to answer BEACON_REQ
mac802154: Handle active scanning
ieee802154: Add support for user active scan requests
====================
Link: https://lore.kernel.org/r/20230623195506.40b87b5f@xps-13
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Even when tcp_splice_read() reads all it was asked for, for blocking
sockets it'll release and immediately regrab the socket lock, loop
around and break on the while check.
Check tss.len right after we adjust it, and return if we're done.
That saves us one release_sock(); lock_sock(); pair per successful
blocking splice read.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/80736a2cc6d478c383ea565ba825eaf4d1abd876.1687523671.git.asml.silence@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZJX+ygAKCRDbK58LschI
g0/2AQDHg12smf9mPfK9wOFDNRIIX8r2iufB8LUFQMzCwltN6gEAkAdkAyfbof7P
TMaNUiHABijAFtChxoSI35j3OOSRrwE=
=GJgN
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2023-06-23
We've added 49 non-merge commits during the last 24 day(s) which contain
a total of 70 files changed, 1935 insertions(+), 442 deletions(-).
The main changes are:
1) Extend bpf_fib_lookup helper to allow passing the route table ID,
from Louis DeLosSantos.
2) Fix regsafe() in verifier to call check_ids() for scalar registers,
from Eduard Zingerman.
3) Extend the set of cpumask kfuncs with bpf_cpumask_first_and()
and a rework of bpf_cpumask_any*() kfuncs. Additionally,
add selftests, from David Vernet.
4) Fix socket lookup BPF helpers for tc/XDP to respect VRF bindings,
from Gilad Sever.
5) Change bpf_link_put() to use workqueue unconditionally to fix it
under PREEMPT_RT, from Sebastian Andrzej Siewior.
6) Follow-ups to address issues in the bpf_refcount shared ownership
implementation, from Dave Marchevsky.
7) A few general refactorings to BPF map and program creation permissions
checks which were part of the BPF token series, from Andrii Nakryiko.
8) Various fixes for benchmark framework and add a new benchmark
for BPF memory allocator to BPF selftests, from Hou Tao.
9) Documentation improvements around iterators and trusted pointers,
from Anton Protopopov.
10) Small cleanup in verifier to improve allocated object check,
from Daniel T. Lee.
11) Improve performance of bpf_xdp_pointer() by avoiding access
to shared_info when XDP packet does not have frags,
from Jesper Dangaard Brouer.
12) Silence a harmless syzbot-reported warning in btf_type_id_size(),
from Yonghong Song.
13) Remove duplicate bpfilter_umh_cleanup in favor of umd_cleanup_helper,
from Jarkko Sakkinen.
14) Fix BPF selftests build for resolve_btfids under custom HOSTCFLAGS,
from Viktor Malik.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (49 commits)
bpf, docs: Document existing macros instead of deprecated
bpf, docs: BPF Iterator Document
selftests/bpf: Fix compilation failure for prog vrf_socket_lookup
selftests/bpf: Add vrf_socket_lookup tests
bpf: Fix bpf socket lookup from tc/xdp to respect socket VRF bindings
bpf: Call __bpf_sk_lookup()/__bpf_skc_lookup() directly via TC hookpoint
bpf: Factor out socket lookup functions for the TC hookpoint.
selftests/bpf: Set the default value of consumer_cnt as 0
selftests/bpf: Ensure that next_cpu() returns a valid CPU number
selftests/bpf: Output the correct error code for pthread APIs
selftests/bpf: Use producer_cnt to allocate local counter array
xsk: Remove unused inline function xsk_buff_discard()
bpf: Keep BPF_PROG_LOAD permission checks clear of validations
bpf: Centralize permissions checks for all BPF map types
bpf: Inline map creation logic in map_create() function
bpf: Move unprivileged checks into map_create() and bpf_prog_load()
bpf: Remove in_atomic() from bpf_link_put().
selftests/bpf: Verify that check_ids() is used for scalars in regsafe()
bpf: Verify scalar ids mapping in regsafe() using check_ids()
selftests/bpf: Check if mark_chain_precision() follows scalar ids
...
====================
Link: https://lore.kernel.org/r/20230623211256.8409-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
MAINTAINERS
* add missing driver git trees
ath11k
* factory test mode support
iwlwifi
* config rework to drop test devices and
split the different families
* major update for new firmware and MLO
stack
* initial multi-link reconfiguration suppor
* multi-BSSID and MLO improvements
other
* fix the last few W=1 warnings from GCC 13
* merged wireless tree to avoid conflicts
-----BEGIN PGP SIGNATURE-----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=KSBu
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2023-06-22' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
Notable changes this time around:
MAINTAINERS
- add missing driver git trees
ath11k
- factory test mode support
iwlwifi
- config rework to drop test devices and
split the different families
- major update for new firmware and MLO
stack
- initial multi-link reconfiguration suppor
- multi-BSSID and MLO improvements
other
- fix the last few W=1 warnings from GCC 13
- merged wireless tree to avoid conflicts
* tag 'wireless-next-2023-06-22' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (245 commits)
wifi: ieee80211: fix erroneous NSTR bitmap size checks
wifi: rtlwifi: cleanup USB interface
wifi: rtlwifi: simplify LED management
wifi: ath10k: improve structure padding
wifi: ath9k: convert msecs to jiffies where needed
wifi: iwlwifi: mvm: Add support for IGTK in D3 resume flow
wifi: iwlwifi: mvm: update two most recent GTKs on D3 resume flow
wifi: iwlwifi: mvm: Refactor security key update after D3
wifi: mac80211: mark keys as uploaded when added by the driver
wifi: iwlwifi: remove support of A0 version of FM RF
wifi: iwlwifi: cfg: clean up Bz module firmware lines
wifi: iwlwifi: pcie: add device id 51F1 for killer 1675
wifi: iwlwifi: bump FW API to 83 for AX/BZ/SC devices
wifi: iwlwifi: cfg: remove trailing dash from FW_PRE constants
wifi: iwlwifi: also unify Ma device configurations
wifi: iwlwifi: also unify Sc device configurations
wifi: iwlwifi: unify Bz/Gl device configurations
wifi: iwlwifi: pcie: also drop jacket from info macro
wifi: iwlwifi: remove support for *nJ devices
wifi: iwlwifi: don't load old firmware for 22000
...
====================
Link: https://lore.kernel.org/r/20230622185602.147650-2-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit ad72c4a06a introduced optimization to return from function
quickly if the MAC address is not changing at all. It was reported
that such change causes dev->addr_assign_type to not change
to NET_ADDR_SET from _PERM or _RANDOM.
Restore the old behavior and skip only call to ndo_set_mac_address.
Fixes: ad72c4a06a ("net: add check for current MAC address in dev_set_mac_address")
Reported-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Piotr Gardocki <piotrx.gardocki@intel.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20230621132106.991342-1-piotrx.gardocki@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=9NBP
-----END PGP SIGNATURE-----
Merge tag 'nf-23-06-21' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter/IPVS fixes for net
This is v3, including a crash fix for patch 01/14.
The following patchset contains Netfilter/IPVS fixes for net:
1) Fix UDP segmentation with IPVS tunneled traffic, from Terin Stock.
2) Fix chain binding transaction logic, add a bound flag to rule
transactions. Remove incorrect logic in nft_data_hold() and
nft_data_release().
3) Add a NFT_TRANS_PREPARE_ERROR deactivate state to deal with releasing
the set/chain as a follow up to 1240eb93f0 ("netfilter: nf_tables:
incorrect error path handling with NFT_MSG_NEWRULE")
4) Drop map element references from preparation phase instead of
set destroy path, otherwise bogus EBUSY with transactions such as:
flush chain ip x y
delete chain ip x w
where chain ip x y contains jump/goto from set elements.
5) Pipapo set type does not regard generation mask from the walk
iteration.
6) Fix reference count underflow in set element reference to
stateful object.
7) Several patches to tighten the nf_tables API:
- disallow set element updates of bound anonymous set
- disallow unbound anonymous set/chain at the end of transaction.
- disallow updates of anonymous set.
- disallow timeout configuration for anonymous sets.
8) Fix module reference leak in chain updates.
9) Fix nfnetlink_osf module autoload.
10) Fix deletion of basechain when NFTA_CHAIN_HOOK is specified as
in iptables-nft.
This Netfilter batch is larger than usual at this stage, I am aware we
are fairly late in the -rc cycle, if you prefer to route them through
net-next, please let me know.
netfilter pull request 23-06-21
* tag 'nf-23-06-21' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables: Fix for deleting base chains with payload
netfilter: nfnetlink_osf: fix module autoload
netfilter: nf_tables: drop module reference after updating chain
netfilter: nf_tables: disallow timeout for anonymous sets
netfilter: nf_tables: disallow updates of anonymous sets
netfilter: nf_tables: reject unbound chain set before commit phase
netfilter: nf_tables: reject unbound anonymous set before commit phase
netfilter: nf_tables: disallow element updates of bound anonymous sets
netfilter: nf_tables: fix underflow in object reference counter
netfilter: nft_set_pipapo: .walk does not deal with generations
netfilter: nf_tables: drop map element references from preparation phase
netfilter: nf_tables: add NFT_TRANS_PREPARE_ERROR to deal with bound set/chain
netfilter: nf_tables: fix chain binding transaction logic
ipvs: align inner_mac_header for encapsulation
====================
Link: https://lore.kernel.org/r/20230621100731.68068-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This reverts commit 1f86123b97 ("net: align SO_RCVMARK required
privileges with SO_MARK") because the reasoning in the commit message
is not really correct:
SO_RCVMARK is used for 'reading' incoming skb mark (via cmsg), as such
it is more equivalent to 'getsockopt(SO_MARK)' which has no priv check
and retrieves the socket mark, rather than 'setsockopt(SO_MARK) which
sets the socket mark and does require privs.
Additionally incoming skb->mark may already be visible if
sysctl_fwmark_reflect and/or sysctl_tcp_fwmark_accept are enabled.
Furthermore, it is easier to block the getsockopt via bpf
(either cgroup setsockopt hook, or via syscall filters)
then to unblock it if it requires CAP_NET_RAW/ADMIN.
On Android the socket mark is (among other things) used to store
the network identifier a socket is bound to. Setting it is privileged,
but retrieving it is not. We'd like unprivileged userspace to be able
to read the network id of incoming packets (where mark is set via
iptables [to be moved to bpf])...
An alternative would be to add another sysctl to control whether
setting SO_RCVMARK is privilged or not.
(or even a MASK of which bits in the mark can be exposed)
But this seems like over-engineering...
Note: This is a non-trivial revert, due to later merged commit e42c7beee7
("bpf: net: Consider has_current_bpf_ctx() when testing capable() in sk_setsockopt()")
which changed both 'ns_capable' into 'sockopt_ns_capable' calls.
Fixes: 1f86123b97 ("net: align SO_RCVMARK required privileges with SO_MARK")
Cc: Larysa Zaremba <larysa.zaremba@intel.com>
Cc: Simon Horman <simon.horman@corigine.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Eyal Birger <eyal.birger@gmail.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Patrick Rohr <prohr@google.com>
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20230618103130.51628-1-maze@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Properly check for RX_DROP_UNUSABLE now that the new drop reason
infrastructure is used. Without this change, the comparison will always
be false as a more specific reason is given in the lower bits of result.
Fixes: baa951a1c1 ("mac80211: use the new drop reasons infrastructure")
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://lore.kernel.org/r/20230621120543.412920-2-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pass addr parameter to mptcp_pm_alloc_anno_list() instead of entry. We
can reduce the scope, e.g. in mptcp_pm_alloc_anno_list(), we only access
"entry->addr", we can then restrict to the pointer to "addr" then.
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The MPTCP code always set the msk state to TCP_CLOSE before
calling performing the fast-close. Move such state transition in
mptcp_do_fastclose() to avoid some code duplication.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some user-space applications want to monitor the subflows utilization.
Dumping the per subflow tcp_info is not enough, as the PM could close
and re-create the subflows under-the-hood, fooling the accounting.
Even checking the src/dst addresses used by each subflow could not
be enough, because new subflows could re-use the same address/port of
the just closed one.
This patch introduces a new socket option, allow dumping all the relevant
information all-at-once (everything, everywhere...), in a consistent
manner.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/388
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The user-space need to properly account the data received/sent by
individual subflows. When additional subflows are created and/or
closed during the MPTCP socket lifetime, the information currently
exposed via MPTCP_TCPINFO are not enough: subflows are identified only
by the sequential position inside the info dumps, and that will change
with the above mentioned events.
To solve the above problem, this patch introduces a new subflow
identifier that is unique inside the given MPTCP socket scope.
The initial subflow get the id 1 and the other subflows get incremental
values at join time.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/388
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently there are no data transfer counters accounting for all
the subflows used by a given MPTCP socket. The user-space can compute
such figures aggregating the subflow info, but that is inaccurate
if any subflow is closed before the MPTCP socket itself.
Add the new counters in the MPTCP socket itself and expose them
via the existing diag and sockopt. While touching mptcp_diag_fill_info(),
acquire the relevant locks before fetching the msk data, to ensure
better data consistency
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/385
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
That will avoid an unneeded conditional in both the fast-path
and in the fallback case and will simplify a bit the next
patch.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The MPTCP protocol access the listener subflow in a lockless
manner in a couple of places (poll, diag). That works only if
the msk itself leaves the listener status only after that the
subflow itself has been closed/disconnected. Otherwise we risk
deadlock in diag, as reported by Christoph.
Address the issue ensuring that the first subflow (the listener
one) is always disconnected before updating the msk socket status.
Reported-by: Christoph Paasch <cpaasch@apple.com>
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/407
Fixes: b29fcfb54c ("mptcp: full disconnect implementation")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Thanks to the previous patch -- "mptcp: consolidate fallback and non
fallback state machine" -- we can finally drop the "temporary hack"
used to detect rx eof.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
An orphaned msk releases the used resources via the worker,
when the latter first see the msk in CLOSED status.
If the msk status transitions to TCP_CLOSE in the release callback
invoked by the worker's final release_sock(), such instance of the
workqueue will not take any action.
Additionally the MPTCP code prevents scheduling the worker once the
socket reaches the CLOSE status: such msk resources will be leaked.
The only code path that can trigger the above scenario is the
__mptcp_check_send_data_fin() in fallback mode.
Address the issue removing the special handling of fallback socket
in __mptcp_check_send_data_fin(), consolidating the state machine
for fallback and non fallback socket.
Since non-fallback sockets do not send and do not receive data_fin,
the mptcp code can update the msk internal status to match the next
step in the SM every time data fin (ack) should be generated or
received.
As a consequence we can remove a bunch of checks for fallback from
the fastpath.
Fixes: 6e628cd3a8 ("mptcp: use mptcp release_cb for delayed tasks")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
At passive MPJ time, if the msk socket lock is held by the user,
the new subflow is appended to the msk->join_list under the msk
data lock.
In mptcp_release_cb()/__mptcp_flush_join_list(), the subflows in
that list are moved from the join_list into the conn_list under the
msk socket lock.
Append and removal could race, possibly corrupting such list.
Address the issue splicing the join list into a temporary one while
still under the msk data lock.
Found by code inspection, the race itself should be almost impossible
to trigger in practice.
Fixes: 3e5014909b ("mptcp: cleanup MPJ subflow list handling")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently the mptcp code has assumes that disconnect() can fail only
at mptcp_sendmsg_fastopen() time - to avoid a deadlock scenario - and
don't even bother returning an error code.
Soon mptcp_disconnect() will handle more error conditions: let's track
them explicitly.
As a bonus, explicitly annotate TCP-level disconnect as not failing:
the mptcp code never blocks for event on the subflows.
Fixes: 7d803344fd ("mptcp: fix deadlock in fastopen error path")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Tested-by: Christoph Paasch <cpaasch@apple.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When port-to-port forwarding for interfaces in HSR node is enabled,
disable promiscuous mode since L2 frame forward happens at the
offloaded hardware.
Signed-off-by: Ravi Gunasekaran <r-gunasekaran@ti.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230614114710.31400-1-r-gunasekaran@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When calling bpf_sk_lookup_tcp(), bpf_sk_lookup_udp() or
bpf_skc_lookup_tcp() from tc/xdp ingress, VRF socket bindings aren't
respoected, i.e. unbound sockets are returned, and bound sockets aren't
found.
VRF binding is determined by the sdif argument to sk_lookup(), however
when called from tc the IP SKB control block isn't initialized and thus
inet{,6}_sdif() always returns 0.
Fix by calculating sdif for the tc/xdp flows by observing the device's
l3 enslaved state.
The cg/sk_skb hooking points which are expected to support
inet{,6}_sdif() pass sdif=-1 which makes __bpf_skc_lookup() use the
existing logic.
Fixes: 6acc9b432e ("bpf: Add helper to retrieve socket in BPF")
Signed-off-by: Gilad Sever <gilad9366@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Shmulik Ladkani <shmulik.ladkani@gmail.com>
Reviewed-by: Eyal Birger <eyal.birger@gmail.com>
Acked-by: Stanislav Fomichev <sdf@google.com>
Cc: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/bpf/20230621104211.301902-4-gilad9366@gmail.com
skb->dev always exists in the tc flow. There is no need to use
bpf_skc_lookup(), bpf_sk_lookup() from this code path.
This change facilitates fixing the tc flow to be VRF aware.
Signed-off-by: Gilad Sever <gilad9366@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Shmulik Ladkani <shmulik.ladkani@gmail.com>
Reviewed-by: Eyal Birger <eyal.birger@gmail.com>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/20230621104211.301902-3-gilad9366@gmail.com
Change BPF helper socket lookup functions to use TC specific variants:
bpf_tc_sk_lookup_tcp() / bpf_tc_sk_lookup_udp() / bpf_tc_skc_lookup_tcp()
instead of sharing implementation with the cg / sk_skb hooking points.
This allows introducing a separate logic for the TC flow.
The tc functions are identical to the original code.
Signed-off-by: Gilad Sever <gilad9366@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Shmulik Ladkani <shmulik.ladkani@gmail.com>
Reviewed-by: Eyal Birger <eyal.birger@gmail.com>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/20230621104211.301902-2-gilad9366@gmail.com
When the driver has some form of GTK rekeying offload, e.g. during
WoWLAN, mac80211 can assume that keys that the driver adds for
that are already present in the hardware acceleration. Mark them
accordingly.
Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230621144414.bc78c7ff2a3d.I5e313d69e2b6a7a4766ef82d0faa122dd4c1c46d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Retrieve the Power Spectral Density (PSD) value from RNR AP
information entry and store it so it could be used by the drivers.
PSD value is explained in Section 9.4.2.170 of Draft
P802.11Revme_D2.0.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230619161906.067ded2b8fc3.I9f407ab5800cbb07045a0537a513012960ced740@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
For extended elements, we currently only calculate the CRC
for some of them, but really we should do it also for the
rest that we care about, such as EHT operation and multi-
link.
Also, while at it, it seems we should do it even if they
aren't well-formed, so we notice if that changes.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230619161906.93235d5c8651.I6615cb3c1244bc9618066baa2bdad7982e9abd1f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
struct sta_info may be removed without holding sta_mtx if it has not
yet been inserted. To support this, only assert that the lock is held
for links other than the deflink.
This fixes lockdep issues that may be triggered in error cases.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230619161906.cdd81377dea0.If5a6734b4b85608a2275a09b4f99b5564d82997f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Due to all the multi-link handling, we now expose the fact that
the sdata/vif is locked to drivers, e.g. when the driver uses
ieee80211_set_monitor_channel(). This was true when a chanctx
is added to or removed from a link, _except_ in monitor mode
with the virtual sdata/vif. Change that, so that drivers can
make that assumption.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230619161906.a5cf7534beda.I5b51664231abee27e02f222083df7ccf88722929@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When receiving a multi-link association response, make sure to
track the BSS parameter change count for each link, including
the assoc link.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230619161906.1799c164e7e9.I8e2c1f5eec6eec3fab525ae2dead9f6f099a2427@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We should not receive/handle unicast protected dual
or public action frames that aren't protected, so
drop them - in the latter case of course only if MFP
is used.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230619161906.eb4461108129.I3c2223cf29d8a3586dfc74b2dda3f6fa2a4eea7c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When MFP is used, drop unprotected robust management frames also
before the 4-way handshake has been completed, i.e. no key has
been installed yet.
Signed-off-by: Alon Giladi <alon.giladi@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230619183718.cfbefddccd0c.Ife369dbb61c87e311ce15739d5b2b4763bfdfbae@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Blamed commit added these helpers for sake of detecting RAW
sockets specific ioctl.
syzbot complained about it [1].
Issue here is that RAW sockets could pretend there was no need
to call ipmr_sk_ioctl()
Regardless of inet_sk(sk)->inet_num, we must be prepared
for ipmr_ioctl() being called later. This must happen
from ipmr_sk_ioctl() context only.
We could add a safety check in ipmr_ioctl() at the risk of breaking
applications.
Instead, remove sk_is_ipmr() and sk_is_icmpv6() because their
name would be misleading, once we change their implementation.
[1]
BUG: KASAN: stack-out-of-bounds in ipmr_ioctl+0xb12/0xbd0 net/ipv4/ipmr.c:1654
Read of size 4 at addr ffffc90003aefae4 by task syz-executor105/5004
CPU: 0 PID: 5004 Comm: syz-executor105 Not tainted 6.4.0-rc6-syzkaller-01304-gc08afcdcf952 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/27/2023
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xd9/0x150 lib/dump_stack.c:106
print_address_description.constprop.0+0x2c/0x3c0 mm/kasan/report.c:351
print_report mm/kasan/report.c:462 [inline]
kasan_report+0x11c/0x130 mm/kasan/report.c:572
ipmr_ioctl+0xb12/0xbd0 net/ipv4/ipmr.c:1654
raw_ioctl+0x4e/0x1e0 net/ipv4/raw.c:881
sock_ioctl_out net/core/sock.c:4186 [inline]
sk_ioctl+0x151/0x440 net/core/sock.c:4214
inet_ioctl+0x18c/0x380 net/ipv4/af_inet.c:1001
sock_do_ioctl+0xcc/0x230 net/socket.c:1189
sock_ioctl+0x1f8/0x680 net/socket.c:1306
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:870 [inline]
__se_sys_ioctl fs/ioctl.c:856 [inline]
__x64_sys_ioctl+0x197/0x210 fs/ioctl.c:856
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7f2944bf6ad9
Code: 28 c3 e8 2a 14 00 00 66 2e 0f 1f 84 00 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007ffd8897a028 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f2944bf6ad9
RDX: 0000000000000000 RSI: 00000000000089e1 RDI: 0000000000000003
RBP: 00007f2944bbac80 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007f2944bbad10
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
</TASK>
The buggy address belongs to stack of task syz-executor105/5004
and is located at offset 36 in frame:
sk_ioctl+0x0/0x440 net/core/sock.c:4172
This frame has 2 objects:
[32, 36) 'karg'
[48, 88) 'buffer'
Fixes: e1d001fa5b ("net: ioctl: Use kernel memory on protocol ioctl callbacks")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Breno Leitao <leitao@debian.org>
Cc: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20230619124336.651528-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Group some variables based on their sizes to reduce hole and avoid padding.
On x86_64, this shrinks the size of 'struct netlbl_domaddr6_map'
from 72 to 64 bytes.
It saves a few bytes of memory and is more cache-line friendly.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Link: https://lore.kernel.org/r/aa109847260e51e174c823b6d1441f75be370f01.1687083361.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Group some variables based on their sizes to reduce hole and avoid padding.
On x86_64, this shrinks the size of 'struct mptcp_pm_add_entry'
from 136 to 128 bytes.
It saves a few bytes of memory and is more cache-line friendly.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/e47b71de54fd3e580544be56fc1bb2985c77b0f4.1687081558.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When deleting a base chain, iptables-nft simply submits the whole chain
to the kernel, including the NFTA_CHAIN_HOOK attribute. The new code
added by fixed commit then turned this into a chain update, destroying
the hook but not the chain itself. Detect the situation by checking if
the chain type is either netdev or inet/ingress.
Fixes: 7d937b1071 ("netfilter: nf_tables: support for deleting devices in an existing netdev chain")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Move the alias from xt_osf to nfnetlink_osf.
Fixes: f932495208 ("netfilter: nfnetlink_osf: extract nfnetlink_subsystem code from xt_osf.c")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>