Commit Graph

14 Commits

Author SHA1 Message Date
Vasily Gorbik 724dc336b7 s390/startup: add pgm check info printing
Try to print out startup pgm check info including exact linux kernel
version, pgm interruption code and ilc, psw and general registers. Like
the following:

Linux version 5.3.0-rc7-07282-ge7b4d41d61bd-dirty (gor@tuxmaker) #3 SMP PREEMPT Thu Sep 5 16:07:34 CEST 2019
Kernel fault: interruption code 0005 ilc:2
PSW : 0000000180000000 0000000000012e52
      R:0 T:0 IO:0 EX:0 Key:0 M:0 W:0 P:0 AS:0 CC:0 PM:0 RI:0 EA:3
GPRS: 0000000000000000 00ffffffffffffff 0000000000000000 0000000000019a58
      000000000000bf68 0000000000000000 0000000000000000 0000000000000000
      0000000000000000 0000000000000000 000000000001a041 0000000000000000
      0000000004c9c000 0000000000010070 0000000000012e42 000000000000beb0

This info makes it apparent that kernel startup failed and might help
to understand what went wrong without actual standalone dump.

Printing code runs on its own stack of 1 page (at unused 0x5000), which
should be sufficient for sclp_early_printk usage (typical stack usage
observed has been around 512 bytes).

The code has pgm check recursion prevention, despite pgm check info
printing failure (follow on pgm check) or success it restores original
faulty psw and gprs and does disabled wait.

Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2019-09-13 12:17:37 +02:00
Vasily Gorbik da9ed30d29 s390/startup: add initial pgm check handler
The startup code is getting more complicated with features like kaslr and
secure boot in place. In a potential unexpected startup code crash case
the system would end up in a pgm check loop at address 0, overwriting
pgm check old psw value and just making debugging more complicated. To
avoid that introduce startup program check handler which is active
immediately after kernel start and until early_pgm_check_handler is set
in kernel/early.c. So it covers kernel relocation phase and transition
to it. This pgm check handler simply saves general/control registers and
psw in the save area which should guarantee that we still have something
to look at when standalone dumper is called without saving registers. And
it does disabled wait with a faulty address in the end.

Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-08-21 12:41:43 +02:00
Vasily Gorbik 6abe281970 s390: enable detection of kernel version from bzImage
Extend "parmarea" to include an offset of the version string, which is
stored as 8-byte big endian value.

To retrieve version string from bzImage reliably, one should check the
presence of "S390EP" ascii string at 0x10008 (available since v3.2),
then read the version string offset from 0x10428 (which has been 0
since v3.2 up to now). The string is null terminated.

Could be retrieved with the following "file" command magic (requires
file v5.34):
8 string \x02\x00\x00\x18\x60\x00\x00\x50\x02\x00\x00\x68\x60\x00\x00\x50\x40\x40\x40\x40\x40\x40\x40\x40 Linux S390
>0x10008       string          S390EP
>>0x10428      bequad          >0
>>>(0x10428.Q) string          >\0             \b, version %s

Reported-by: Petr Tesarik <ptesarik@suse.com>
Suggested-by: Petr Tesarik <ptesarik@suse.com>
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2019-07-23 10:43:50 +02:00
Gerald Schaefer a80313ff91 s390/kernel: introduce .dma sections
With a relocatable kernel that could reside at any place in memory, code
and data that has to stay below 2 GB needs special handling.

This patch introduces .dma sections for such text, data and ex_table.
The sections will be part of the decompressor kernel, so they will not
be relocated and stay below 2 GB. Their location is passed over to the
decompressed / relocated kernel via the .boot.preserved.data section.

The duald and aste for control register setup also need to stay below
2 GB, so move the setup code from arch/s390/kernel/head64.S to
arch/s390/boot/head.S. The duct and linkage_stack could reside above
2 GB, but their content has to be preserved for the decompresed kernel,
so they are also moved into the .dma section.

The start and end address of the .dma sections is added to vmcoreinfo,
for crash support, to help debugging in case the kernel crashed there.

Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Reviewed-by: Philipp Rudo <prudo@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-04-29 10:47:10 +02:00
Gerald Schaefer 087c4d7423 s390/sclp: do not use static sccbs
The sccbs for init/read/sdias/early have to be located below 2 GB, and
they are currently defined as a static buffer.

With a relocatable kernel that could reside at any place in memory, this
will no longer guarantee the location below 2 GB, so use a dynamic
GFP_DMA allocation instead.

The sclp_early_sccb buffer needs special handling, as it can be used
very early, and by both the decompressor and also the decompressed
kernel. Therefore, a fixed 4 KB buffer is introduced at 0x11000, the
former PARMAREA_END. The new PARMAREA_END is now 0x12000, and it is
renamed to HEAD_END, as it is rather the end of head.S and not the end
of the parmarea.

Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Reviewed-by: Philipp Rudo <prudo@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-04-29 10:47:10 +02:00
Philipp Rudo d0d249d75d s390/kexec_file: Simplify parmarea access
Access the parmarea in head.S via a struct instead of individual offsets.

While at it make the fields in the parmarea .quads.

Signed-off-by: Philipp Rudo <prudo@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-04-29 10:43:57 +02:00
Vasily Gorbik 19733fe872 s390/head: avoid doubling early boot stack size under KASAN
Early boot stack uses predefined 4 pages of memory 0x8000-0xC000. This
stack is used to run not instumented decompressor/facilities
verification C code. It doesn't make sense to double its size when
the kernel is built with KASAN support. BOOT_STACK_ORDER is introduced
to avoid that.

Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-10-09 11:21:32 +02:00
Vasily Gorbik 8f75582a2f s390: remove decompressor's head.S
Decompressor's head.S provided "data mover" sole purpose of which has
been to safely move uncompressed kernel at 0x100000 and jump to it.

With current bzImage layout entire decompressor's code guaranteed to be
in a safe location under 0x100000, and hence could not be overwritten
during kernel move. For that reason head.S could be replaced with simple
memmove function. To do so introduce early boot code phase which is
executed from arch/s390/boot/head.S after "verify_facilities" and takes
care of optional kernel image decompression and transition to it.

Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-10-09 11:21:02 +02:00
Vasily Gorbik 4e62d45885 s390: clean up stacks setup
Replace hard coded stack frame overhead values with STACK_FRAME_OVERHEAD
definition. Avoid unnecessary arithmetic instructions.

Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-09-20 13:20:29 +02:00
Martin Schwidefsky 8e5a7627b5 s390: add initial 64-bit restart PSW
To be able to start a kernel image loaded into memory with a
PSW restart, place a 64-bit restart PSW at 0x1a0 in absolute
lowcore.

Suggested-by: Dominik Klein <dominik.klein@linux.ibm.com>
Tested-by: Dominik Klein <dominik.klein@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-09-20 13:20:28 +02:00
Vasily Gorbik 627c9b6205 s390/boot: block uncompressed vmlinux booting attempts
Since the plain vmlinux ELF file no longer carries all necessary parts
for starting up (like the entry point and decompressor), add a check
which would block boot process and encourage users to use bzImage or
arch/s390/boot/compressed/vmlinux instead.

The check relies on s390 linux entry point ABI definition, which is only
present in bzImage and arch/s390/boot/compressed/vmlinux.

Reported-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-07-02 11:25:05 +02:00
Vasily Gorbik 89b5202e81 s390/decompressor: support uncompressed kernel
Implement uncompressed kernel support (when "None" is picked in kernel
compression mode list). In that case an actual decompression code is
skipped and control is passed from boot/head.S to startup_continue in
kernel/head64.S. To achieve that uncompressed kernel payload is
conditionally put at 0x100000 in bzImage.

In reality this is very close to classic uncompressed kernel "image",
but the decompressor has its own build and link process,
kernel/head64.S lives at 0x100000 rather than at 0x11000, and .bss
section is reused for both stages.

Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-06-25 10:14:40 +02:00
Vasily Gorbik a5802353b1 s390/decompressor: rename entry point to startup_decompressor
Rename the decompressor entry point to startup_decompressor to
avoid confusion, leaving startup_continue as the entry point of the
uncompressed image.

Also remove obsolete comment, as the decompressor code is
unconditionally called from boot/head.S now.

Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-06-25 10:14:38 +02:00
Vasily Gorbik 8282cd64d0 s390/boot: make head.S and als.c be part of the decompressor only
Since uncompressed kernel image does not have to be bootable anymore,
move head.S, head_kdump.S and als.c to boot/ folder and compile them
in just in the decompressor.

Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-06-25 10:14:38 +02:00