Recently, we had some servers upgraded to the latest kernel and noticed
the indicator from the user side showed worse results than before. It is
caused by the limitation of tp->rcv_wnd.
In 2018 commit a337531b94 ("tcp: up initial rmem to 128KB and SYN rwin
to around 64KB") limited the initial value of tp->rcv_wnd to 65535, most
CDN teams would not benefit from this change because they cannot have a
large window to receive a big packet, which will be slowed down especially
in long RTT. Small rcv_wnd means slow transfer speed, to some extent. It's
the side effect for the latency/time-sensitive users.
To avoid future confusion, current change doesn't affect the initial
receive window on the wire in a SYN or SYN+ACK packet which are set within
65535 bytes according to RFC 7323 also due to the limit in
__tcp_transmit_skb():
th->window = htons(min(tp->rcv_wnd, 65535U));
In one word, __tcp_transmit_skb() already ensures that constraint is
respected, no matter how large tp->rcv_wnd is. The change doesn't violate
RFC.
Let me provide one example if with or without the patch:
Before:
client --- SYN: rwindow=65535 ---> server
client <--- SYN+ACK: rwindow=65535 ---- server
client --- ACK: rwindow=65536 ---> server
Note: for the last ACK, the calculation is 512 << 7.
After:
client --- SYN: rwindow=65535 ---> server
client <--- SYN+ACK: rwindow=65535 ---- server
client --- ACK: rwindow=175232 ---> server
Note: I use the following command to make it work:
ip route change default via [ip] dev eth0 metric 100 initrwnd 120
For the last ACK, the calculation is 1369 << 7.
When we apply such a patch, having a large rcv_wnd if the user tweak this
knob can help transfer data more rapidly and save some rtts.
Fixes: a337531b94 ("tcp: up initial rmem to 128KB and SYN rwin to around 64KB")
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Link: https://lore.kernel.org/r/20240521134220.12510-1-kerneljasonxing@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In the prueth_probe() function, if one of the calls to emac_phy_connect()
fails due to of_phy_connect() returning NULL, then the subsequent call to
phy_attached_info() will dereference a NULL pointer.
Check the return code of emac_phy_connect and fail cleanly if there is an
error.
Fixes: 128d5874c0 ("net: ti: icssg-prueth: Add ICSSG ethernet driver")
Cc: stable@vger.kernel.org
Signed-off-by: Romain Gantois <romain.gantois@bootlin.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: MD Danish Anwar <danishanwar@ti.com>
Link: https://lore.kernel.org/r/20240521-icssg-prueth-fix-v1-1-b4b17b1433e9@bootlin.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In tls_init(), a write memory barrier is missing, and store-store
reordering may cause NULL dereference in tls_{setsockopt,getsockopt}.
CPU0 CPU1
----- -----
// In tls_init()
// In tls_ctx_create()
ctx = kzalloc()
ctx->sk_proto = READ_ONCE(sk->sk_prot) -(1)
// In update_sk_prot()
WRITE_ONCE(sk->sk_prot, tls_prots) -(2)
// In sock_common_setsockopt()
READ_ONCE(sk->sk_prot)->setsockopt()
// In tls_{setsockopt,getsockopt}()
ctx->sk_proto->setsockopt() -(3)
In the above scenario, when (1) and (2) are reordered, (3) can observe
the NULL value of ctx->sk_proto, causing NULL dereference.
To fix it, we rely on rcu_assign_pointer() which implies the release
barrier semantic. By moving rcu_assign_pointer() after ctx->sk_proto is
initialized, we can ensure that ctx->sk_proto are visible when
changing sk->sk_prot.
Fixes: d5bee7374b ("net/tls: Annotate access to sk_prot with READ_ONCE/WRITE_ONCE")
Signed-off-by: Yewon Choi <woni9911@gmail.com>
Signed-off-by: Dae R. Jeong <threeearcat@gmail.com>
Link: https://lore.kernel.org/netdev/ZU4OJG56g2V9z_H7@dragonet/T/
Link: https://lore.kernel.org/r/Zkx4vjSFp0mfpjQ2@libra05
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The assignment of pps_enable is protected by tmreg_lock, but the read
operation of pps_enable is not. So the Coverity tool reports a lock
evasion warning which may cause data race to occur when running in a
multithread environment. Although this issue is almost impossible to
occur, we'd better fix it, at least it seems more logically reasonable,
and it also prevents Coverity from continuing to issue warnings.
Fixes: 278d240478 ("net: fec: ptp: Enable PPS output based on ptp clock")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://lore.kernel.org/r/20240521023800.17102-1-wei.fang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This reverts commit 565736048b.
According to the commit, it implements a manual AN-37 for some
"troublesome" Juniper MX5 switches. This appears to be a workaround for a
particular switch.
It has been reported that this causes a severe breakage for other switches,
including a Cisco 3560CX-12PD-S.
The code appears to be a workaround for a specific switch which fails to
link in SFI mode. It expects to see AN-37 auto negotiation in order to
link. The Cisco switch is not expecting AN-37 auto negotiation. When the
device starts the manual AN-37, the Cisco switch decides that the port is
confused and stops attempting to link with it. This persists until a power
cycle. A simple driver unload and reload does not resolve the issue, even
if loading with a version of the driver which lacks this workaround.
The authors of the workaround commit have not responded with
clarifications, and the result of the workaround is complete failure to
connect with other switches.
This appears to be a case where the driver can either "correctly" link with
the Juniper MX5 switch, at the cost of bricking the link with the Cisco
switch, or it can behave properly for the Cisco switch, but fail to link
with the Junipir MX5 switch. I do not know enough about the standards
involved to clearly determine whether either switch is at fault or behaving
incorrectly. Nor do I know whether there exists some alternative fix which
corrects behavior with both switches.
Revert the workaround for the Juniper switch.
Fixes: 565736048b ("ixgbe: Manual AN-37 for troublesome link partners for X550 SFI")
Link: https://lore.kernel.org/netdev/cbe874db-9ac9-42b8-afa0-88ea910e1e99@intel.com/T/
Link: https://forum.proxmox.com/threads/intel-x553-sfp-ixgbe-no-go-on-pve8.135129/#post-612291
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Cc: Jeff Daly <jeffd@silicom-usa.com>
Cc: kernel.org-fo5k2w@ycharbi.fr
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240520-net-2024-05-20-revert-silicom-switch-workaround-v1-1-50f80f261c94@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
According to ceph documentation [1], "getfattr -d /some/dir" no longer
displays the list of all extended attributes. Both CephFS kernel and
FUSE clients hide this information.
To retrieve the information you have to specify the particular attribute
name e.g. "getfattr -n ceph.dir.rbytes /some/dir".
[1] https://docs.ceph.com/en/latest/cephfs/quota/
Signed-off-by: Artem Ikonnikov <artem@datacrunch.io>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Since we have support checking the mds auth cap in kclient, just
set the feature bit.
Link: https://tracker.ceph.com/issues/61333
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Before doing the op locally we need to check the cephx access.
Link: https://tracker.ceph.com/issues/61333
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Before opening the file locally we need to check the cephx access.
Link: https://tracker.ceph.com/issues/61333
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
If we hit any failre just try to force it to do the sync setattr.
Link: https://tracker.ceph.com/issues/61333
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
This will help check the mds auth access in client side. Always
insert the server path in front of the target path when matching
the paths.
[ idryomov: use u32 instead of uint32_t ]
Link: https://tracker.ceph.com/issues/61333
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Save the cap_auths, which have been parsed by the MDS, in the opened
session.
[ idryomov: use s64 and u32 instead of int64_t and uint32_t, switch to
bool for root_squash, readable and writeable ]
Link: https://tracker.ceph.com/issues/61333
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Testing a network device that has large numbers of bytes/packets may
overflow. Using stats64 when comparing fixes this problem.
I tripped on this while iterating on a qstats patch for mlx5. See below
for confirmation without my added code that this is a bug.
Before this patch (with added debugging output):
$ NETIF=eth0 tools/testing/selftests/drivers/net/stats.py
KTAP version 1
1..4
ok 1 stats.check_pause
ok 2 stats.check_fec
rstat: 481708634 qstat: 666201639514 key: tx-bytes
not ok 3 stats.pkt_byte_sum
ok 4 stats.qstat_by_ifindex
Note the huge delta above ^^^ in the rtnl vs qstats.
After this patch:
$ NETIF=eth0 tools/testing/selftests/drivers/net/stats.py
KTAP version 1
1..4
ok 1 stats.check_pause
ok 2 stats.check_fec
ok 3 stats.pkt_byte_sum
ok 4 stats.qstat_by_ifindex
It looks like rtnl_fill_stats in net/core/rtnetlink.c will attempt to
copy the 64bit stats into a 32bit structure which is probably why this
behavior is occurring.
To show this is happening, you can get the underlying stats that the
stats.py test uses like this:
$ ./cli.py --spec ../../../Documentation/netlink/specs/rt_link.yaml \
--do getlink --json '{"ifi-index": 7}'
And examine the output (heavily snipped to show relevant fields):
'stats': {
'multicast': 3739197,
'rx-bytes': 1201525399,
'rx-packets': 56807158,
'tx-bytes': 492404458,
'tx-packets': 1200285371,
'stats64': {
'multicast': 3739197,
'rx-bytes': 35561263767,
'rx-packets': 56807158,
'tx-bytes': 666212335338,
'tx-packets': 1200285371,
The stats.py test prior to this patch was using the 'stats' structure
above, which matches the failure output on my system.
Comparing side by side, rx-bytes and tx-bytes, and getting ethtool -S
output:
rx-bytes stats: 1201525399
rx-bytes stats64: 35561263767
rx-bytes ethtool: 36203402638
tx-bytes stats: 492404458
tx-bytes stats64: 666212335338
tx-bytes ethtool: 666215360113
Note that the above was taken from a system with an mlx5 NIC, which only
exposes ndo_get_stats64.
Based on the ethtool output and qstat output, it appears that stats.py
should be updated to use the 'stats64' structure for accurate
comparisons when packet/byte counters get very large.
To confirm that this was not related to the qstats code I was iterating
on, I booted a kernel without my driver changes and re-ran the test
which shows the qstats are skipped (as they don't exist for mlx5):
NETIF=eth0 tools/testing/selftests/drivers/net/stats.py
KTAP version 1
1..4
ok 1 stats.check_pause
ok 2 stats.check_fec
ok 3 stats.pkt_byte_sum # SKIP qstats not supported by the device
ok 4 stats.qstat_by_ifindex # SKIP No ifindex supports qstats
But, fetching the stats using the CLI
$ ./cli.py --spec ../../../Documentation/netlink/specs/rt_link.yaml \
--do getlink --json '{"ifi-index": 7}'
Shows the same issue (heavily snipped for relevant fields only):
'stats': {
'multicast': 105489,
'rx-bytes': 530879526,
'rx-packets': 751415,
'tx-bytes': 2510191396,
'tx-packets': 27700323,
'stats64': {
'multicast': 105489,
'rx-bytes': 530879526,
'rx-packets': 751415,
'tx-bytes': 15395093284,
'tx-packets': 27700323,
Comparing side by side with ethtool -S on the unmodified mlx5 driver:
tx-bytes stats: 2510191396
tx-bytes stats64: 15395093284
tx-bytes ethtool: 17718435810
Fixes: f0e6c86e4b ("testing: net-drv: add a driver test for stats reporting")
Signed-off-by: Joe Damato <jdamato@fastly.com>
Link: https://lore.kernel.org/r/20240520235850.190041-1-jdamato@fastly.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
HP ProBook 440/460 G11 needs ALC236_FIXUP_HP_GPIO_LED quirk to
make mic-mute/audio-mute working.
Signed-off-by: Andy Chi <andy.chi@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20240523061832.607500-1-andy.chi@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Bergmann which enables a number of additional build-time warnings. We
fixed all the fallout which we could find, there may still be a few
stragglers.
- Samuel Holland has developed the series "Unified cross-architecture
kernel-mode FPU API". This does a lot of consolidation of
per-architecture kernel-mode FPU usage and enables the use of newer AMD
GPUs on RISC-V.
- Tao Su has fixed some selftests build warnings in the series
"Selftests: Fix compilation warnings due to missing _GNU_SOURCE
definition".
- This pull also includes a nilfs2 fixup from Ryusuke Konishi.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZk6OSAAKCRDdBJ7gKXxA
jpTGAP9hQaZ+g7CO38hKQAtEI8rwcZJtvUAP84pZEGMjYMGLxQD/S8z1o7UHx61j
DUbnunbOkU/UcPx3Fs/gp4KcJARMEgs=
=EPi9
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2024-05-22-17-30' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull more non-mm updates from Andrew Morton:
- A series ("kbuild: enable more warnings by default") from Arnd
Bergmann which enables a number of additional build-time warnings. We
fixed all the fallout which we could find, there may still be a few
stragglers.
- Samuel Holland has developed the series "Unified cross-architecture
kernel-mode FPU API". This does a lot of consolidation of
per-architecture kernel-mode FPU usage and enables the use of newer
AMD GPUs on RISC-V.
- Tao Su has fixed some selftests build warnings in the series
"Selftests: Fix compilation warnings due to missing _GNU_SOURCE
definition".
- This pull also includes a nilfs2 fixup from Ryusuke Konishi.
* tag 'mm-nonmm-stable-2024-05-22-17-30' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (23 commits)
nilfs2: make block erasure safe in nilfs_finish_roll_forward()
selftests/harness: use 1024 in place of LINE_MAX
Revert "selftests/harness: remove use of LINE_MAX"
selftests/fpu: allow building on other architectures
selftests/fpu: move FP code to a separate translation unit
drm/amd/display: use ARCH_HAS_KERNEL_FPU_SUPPORT
drm/amd/display: only use hard-float, not altivec on powerpc
riscv: add support for kernel-mode FPU
x86: implement ARCH_HAS_KERNEL_FPU_SUPPORT
powerpc: implement ARCH_HAS_KERNEL_FPU_SUPPORT
LoongArch: implement ARCH_HAS_KERNEL_FPU_SUPPORT
lib/raid6: use CC_FLAGS_FPU for NEON CFLAGS
arm64: crypto: use CC_FLAGS_FPU for NEON CFLAGS
arm64: implement ARCH_HAS_KERNEL_FPU_SUPPORT
ARM: crypto: use CC_FLAGS_FPU for NEON CFLAGS
ARM: implement ARCH_HAS_KERNEL_FPU_SUPPORT
arch: add ARCH_HAS_KERNEL_FPU_SUPPORT
x86/fpu: fix asm/fpu/types.h include guard
kbuild: enable -Wcast-function-type-strict unconditionally
kbuild: enable -Wformat-truncation on clang
...
__destroy_new_inode() is appropriate when we have _just_allocated the
inode, but not when it's been fully initialized and on i_sb_list.
Reported-by: syzbot+a0ddc9873c280a4cb18f@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
nested allocations within stackdepot and page-owner.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZk6MRwAKCRDdBJ7gKXxA
jnzeAP9WHW425N7pWmE7rK7n8oXZK9f356dKJMtz2A35Bx6XJgEAuK86kDRA4Kv3
kg8mtwzOIQYKZWzn5VlcvBbtlhjKGwM=
=9/Ou
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2024-05-22-17-22' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull more mm updates from Andrew Morton:
"A series from Dave Chinner which cleans up and fixes the handling of
nested allocations within stackdepot and page-owner"
* tag 'mm-stable-2024-05-22-17-22' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm/page-owner: use gfp_nested_mask() instead of open coded masking
stackdepot: use gfp_nested_mask() instead of open coded masking
mm: lift gfp_kmemleak_mask() to gfp.h
With the rework of how the __string() handles dynamic strings where it
saves off the source string in field in the helper structure[1], the
assignment of that value to the trace event field is stored in the helper
value and does not need to be passed in again.
This means that with:
__string(field, mystring)
Which use to be assigned with __assign_str(field, mystring), no longer
needs the second parameter and it is unused. With this, __assign_str()
will now only get a single parameter.
There's over 700 users of __assign_str() and because coccinelle does not
handle the TRACE_EVENT() macro I ended up using the following sed script:
git grep -l __assign_str | while read a ; do
sed -e 's/\(__assign_str([^,]*[^ ,]\) *,[^;]*/\1)/' $a > /tmp/test-file;
mv /tmp/test-file $a;
done
I then searched for __assign_str() that did not end with ';' as those
were multi line assignments that the sed script above would fail to catch.
Note, the same updates will need to be done for:
__assign_str_len()
__assign_rel_str()
__assign_rel_str_len()
I tested this with both an allmodconfig and an allyesconfig (build only for both).
[1] https://lore.kernel.org/linux-trace-kernel/20240222211442.634192653@goodmis.org/
Link: https://lore.kernel.org/linux-trace-kernel/20240516133454.681ba6a0@rorschach.local.home
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Christian König <christian.koenig@amd.com> for the amdgpu parts.
Acked-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> #for
Acked-by: Rafael J. Wysocki <rafael@kernel.org> # for thermal
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Darrick J. Wong <djwong@kernel.org> # xfs
Tested-by: Guenter Roeck <linux@roeck-us.net>
the btree key cache uses the srcu struct created/destroyed by
btree_iter.c; btree_iter needs to be exited last.
Reported-by: syzbot+3af9daea347788b15213@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Trailing slashes in share paths (like: /home/me/Share/) caused permission
issues with shares for clients on iOS and on Android TV for me,
but otherwise they work fine with plain old Samba.
Cc: stable@vger.kernel.org
Signed-off-by: Nandor Kracser <bonifaido@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Charlie Jenkins <charlie@rivosinc.com> says:
This series contains two minor fixes for the extension parsing in
cpufeature.c.
Some T-Head boards without vector 1.0 support report "v" in the isa
string in their DT which will cause the kernel to run vector code. The
code to blacklist "v" from these boards was doing so by using
riscv_cached_mvendorid() which has not been populated at the time of
extension parsing. This fix instead greedily reads the mvendorid CSR of
the boot hart to determine if the cpu is from T-Head.
The other fix is for an incorrect indexing bug. riscv extensions
sometimes imply other extensions. When adding these "subset" extensions
to the hardware capabilities array, they need to be checked if they are
valid. The current code only checks if the extension that is including
other extensions is valid and not the subset extensions.
These patches were previously included in:
https://lore.kernel.org/lkml/20240420-dev-charlie-support_thead_vector_6_9-v3-0-67cff4271d1d@rivosinc.com/
* b4-shazam-merge:
riscv: cpufeature: Fix extension subset checking
riscv: cpufeature: Fix thead vector hwcap removal
Link: https://lore.kernel.org/r/20240502-cpufeature_fixes-v4-0-b3d1a088722d@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Add two tests to check vector save/restore when a signal is received
during a vector routine. One test ensures that a value is not clobbered
during signal handling. The other verifies that vector registers
modified in the signal handler are properly reflected when the signal
handling is complete.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Reviewed-by: Björn Töpel <bjorn@rivosinc.com>
Reviewed-by: Andy Chiu <andy.chiu@sifive.com>
Tested-by: Andy Chiu <andy.chiu@sifive.com>
Link: https://lore.kernel.org/r/20240403-vector_sigreturn_tests-v1-1-2e68b7a3b8d7@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The access_error() of vma already checked under per-VMA lock, if it
is a bad access, directly handle error, no need to retry with mmap_lock
again. Since the page faut is handled under per-VMA lock, count it as
a vma lock event with VMA_LOCK_SUCCESS.
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Tested-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20240403083805.1818160-6-wangkefeng.wang@huawei.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The bytes copy for unaligned head would cover at most SZREG-1 bytes, so
it's better to set the threshold as >= (SZREG-1 + word_copy stride size)
which equals to 9*SZREG-1.
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20240313091929.4029960-1-xiao.w.wang@intel.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
When the dst buffer pointer points to the last accessible aligned addr, we
could still run another iteration of unrolled copy.
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20240313103334.4036554-1-xiao.w.wang@intel.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The declaration of set_cpu_online() takes a bool value. So replace
int here to make it consistent with the declaration.
Signed-off-by: Zhao Ke <ke.zhao@shingroup.cn>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Link: https://lore.kernel.org/r/20240318065404.123668-1-ke.zhao@shingroup.cn
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The cbo and which-cpu hwprobe selftests leave their artifacts in the
kernel tree and end up being tracked by git. Add the binaries to the
hwprobe selftest .gitignore so this no longer happens.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Fixes: a29e2a48af ("RISC-V: selftests: Add CBO tests")
Fixes: ef7d6abb2c ("RISC-V: selftests: Add which-cpus hwprobe test")
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20240425-gitignore_hwprobe_artifacts-v1-1-dfc5a20da469@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Nam Cao <namcao@linutronix.de> says:
The debug_pagealloc feature is not functional on RISCV. With this feature
enabled (CONFIG_DEBUG_PAGEALLOC=y and debug_pagealloc=on), kernel crashes
early during boot.
QEMU command that can reproduce this problem:
qemu-system-riscv64 -machine virt \
-kernel Image \
-append "console=ttyS0 root=/dev/vda debug_pagealloc=on" \
-nographic \
-drive "file=root.img,format=raw,id=hd0" \
-device virtio-blk-device,drive=hd0 \
-m 4G \
This series makes debug_pagealloc functional.
* b4-shazam-merge:
riscv: rewrite __kernel_map_pages() to fix sleeping in invalid context
riscv: force PAGE_SIZE linear mapping if debug_pagealloc is enabled
Link: https://lore.kernel.org/r/cover.1715750938.git.namcao@linutronix.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
If the load access fault occures in a leaf function (with
CONFIG_FRAME_POINTER=y), when wrong stack trace will be displayed:
[<ffffffff804853c2>] regmap_mmio_read32le+0xe/0x1c
---[ end trace 0000000000000000 ]---
Registers dump:
ra 0xffffffff80485758 <regmap_mmio_read+36>
sp 0xffffffc80200b9a0
fp 0xffffffc80200b9b0
pc 0xffffffff804853ba <regmap_mmio_read32le+6>
Stack dump:
0xffffffc80200b9a0: 0xffffffc80200b9e0 0xffffffc80200b9e0
0xffffffc80200b9b0: 0xffffffff8116d7e8 0x0000000000000100
0xffffffc80200b9c0: 0xffffffd8055b9400 0xffffffd8055b9400
0xffffffc80200b9d0: 0xffffffc80200b9f0 0xffffffff8047c526
0xffffffc80200b9e0: 0xffffffc80200ba30 0xffffffff8047fe9a
The assembler dump of the function preambula:
add sp,sp,-16
sd s0,8(sp)
add s0,sp,16
In the fist stack frame, where ra is not stored on the stack we can
observe:
0(sp) 8(sp)
.---------------------------------------------.
sp->| frame->fp | frame->ra (saved fp) |
|---------------------------------------------|
fp->| .... | .... |
|---------------------------------------------|
| | |
and in the code check is performed:
if (regs && (regs->epc == pc) && (frame->fp & 0x7))
I see no reason to check frame->fp value at all, because it is can be
uninitialized value on the stack. A better way is to check frame->ra to
be an address on the stack. After the stacktrace shows as expect:
[<ffffffff804853c2>] regmap_mmio_read32le+0xe/0x1c
[<ffffffff80485758>] regmap_mmio_read+0x24/0x52
[<ffffffff8047c526>] _regmap_bus_reg_read+0x1a/0x22
[<ffffffff8047fe9a>] _regmap_read+0x5c/0xea
[<ffffffff80480376>] _regmap_update_bits+0x76/0xc0
...
---[ end trace 0000000000000000 ]---
As pointed by Samuel Holland it is incorrect to remove check of the stackframe
entirely.
Changes since v2 [2]:
- Add accidentally forgotten curly brace
Changes since v1 [1]:
- Instead of just dropping frame->fp check, replace it with validation of
frame->ra, which should be a stack address.
- Move frame pointer validation into the separate function.
[1] https://lore.kernel.org/linux-riscv/20240426072701.6463-1-dev.mbstr@gmail.com/
[2] https://lore.kernel.org/linux-riscv/20240521131314.48895-1-dev.mbstr@gmail.com/
Fixes: f766f77a74 ("riscv/stacktrace: Fix stack output without ra on the stack top")
Signed-off-by: Matthew Bystrin <dev.mbstr@gmail.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Link: https://lore.kernel.org/r/20240521191727.62012-1-dev.mbstr@gmail.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
This commit replaces riscv's support for FTRACE_WITH_REGS with support
for FTRACE_WITH_ARGS. This is required for the ongoing effort to stop
relying on stop_machine() for RISCV's implementation of ftrace.
The main relevant benefit that this change will bring for the above
use-case is that now we don't have separate ftrace_caller and
ftrace_regs_caller trampolines. This will allow the callsite to call
ftrace_caller by modifying a single instruction. Now the callsite can
do something similar to:
When not tracing: | When tracing:
func: func:
auipc t0, ftrace_caller_top auipc t0, ftrace_caller_top
nop <=========<Enable/Disable>=========> jalr t0, ftrace_caller_bottom
[...] [...]
The above assumes that we are dropping the support of calling a direct
trampoline from the callsite. We need to drop this as the callsite can't
change the target address to call, it can only enable/disable a call to
a preset target (ftrace_caller in the above diagram). We can later optimize
this by calling an intermediate dispatcher trampoline before ftrace_caller.
Currently, ftrace_regs_caller saves all CPU registers in the format of
struct pt_regs and allows the tracer to modify them. We don't need to
save all of the CPU registers because at function entry only a subset of
pt_regs is live:
|----------+----------+---------------------------------------------|
| Register | ABI Name | Description |
|----------+----------+---------------------------------------------|
| x1 | ra | Return address for traced function |
| x2 | sp | Stack pointer |
| x5 | t0 | Return address for ftrace_caller trampoline |
| x8 | s0/fp | Frame pointer |
| x10-11 | a0-1 | Function arguments/return values |
| x12-17 | a2-7 | Function arguments |
|----------+----------+---------------------------------------------|
See RISCV calling convention[1] for the above table.
Saving just the live registers decreases the amount of stack space
required from 288 Bytes to 112 Bytes.
Basic testing was done with this on the VisionFive 2 development board.
Note:
- Moving from REGS to ARGS will mean that RISCV will stop supporting
KPROBES_ON_FTRACE as it requires full pt_regs to be saved.
- KPROBES_ON_FTRACE will be supplanted by FPROBES see [2].
[1] https://riscv.org/wp-content/uploads/2015/01/riscv-calling.pdf
[2] https://lore.kernel.org/all/170887410337.564249.6360118840946697039.stgit@devnote2/
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Tested-by: Björn Töpel <bjorn@rivosinc.com>
Reviewed-by: Björn Töpel <bjorn@rivosinc.com>
Link: https://lore.kernel.org/r/20240405142453.4187-1-puranjay@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Samuel Holland <samuel.holland@sifive.com> says:
This series optimizes access_ok() by defining TASK_SIZE_MAX. At Alex's
suggestion, I also tried making TASK_SIZE constant (specifically by
making PGDIR_SHIFT a variable instead of a ternary expression, then
replacing the load with an immediate using ALTERNATIVE). This appeared
to slightly improve performance on some implementations (C906) but
regressed it on others (FU740). So I am leaving further optimizations to
a later series.
* b4-shazam-merge:
riscv: Define TASK_SIZE_MAX for __access_ok()
riscv: Remove PGDIR_SIZE_L3 and TASK_SIZE_MIN
Link: https://lore.kernel.org/r/20240327143858.711792-1-samuel.holland@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Since commit aad15bc85c ("riscv: Change code model of module to
medany to improve data accessing"), kernel modules have not been built
with -fPIC, so they wouldn't have R_RISCV_GOT_HI20 or R_RISCV_CALL_PLT
relocations, and handling of those relocations is unnecessary.
If RELOCATABLE=y, kernel modules will be built with -fPIE, which would
reintroduce said relocations, so only select MODULE_SECTIONS when
RELOCATABLE.
Signed-off-by: Qingfang Deng <qingfang.deng@siflower.com.cn>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Link: https://lore.kernel.org/r/20240511015725.1162-1-dqfext@gmail.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Define the archhelp variable so that 'make ACRH=riscv help' will show
the targets specific to building a RISC-V kernel like other
architectures.
Tested-by: Björn Töpel <bjorn@rivosinc.com>
Signed-off-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20240504193446.196886-3-emil.renner.berthing@canonical.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Previously the build process would always set KBUILD_IMAGE to the
uncompressed Image file (unless XIP_KERNEL or EFI_ZBOOT was enabled) and
unconditionally compress it into Image.gz. However there are already
build targets for Image.bz2, Image.lz4, Image.lzma, Image.lzo and
Image.zstd, so let's make use of those, make the compression method
configurable and set KBUILD_IMAGE accordingly so that targets like
'make install' and 'make bindeb-pkg' will use the chosen image.
Tested-by: Björn Töpel <bjorn@rivosinc.com>
Signed-off-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Reviewed-by: Nicolas Schier <n.schier@avm.de>
Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20240504193446.196886-2-emil.renner.berthing@canonical.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
verify_replicas_entry() is only for newly created replicas entries -
existing entries on disk may have unknown data types, and we have real
verifiers for them.
Reported-by: syzbot+73414091bd382684ee2b@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Add hot-join support for dw i3c master controller.
By default, the hot-join acknowledgment is disabled, and the hardware will
automatically send the DISEC CCC when it receives the hot-join request.
Users can use the sys entry to enable it.
Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com>
Link: https://lore.kernel.org/r/20240429073624.256830-1-billy_tsai@aspeedtech.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Enable runtime PM for i3c master node during master registration time.
Sometimes i3c client device driver may want to control the PM of the
parent (master) to perform the transactions and save the power in an
efficient way by controlling the session. Hence device can call PM
APIs by passing the parent node.
Here, I3C target device when calls pm_runtime_get_sync(dev->parent)
couldn't invoke master drivers runtime PM callback registered by
the master driver because parent's PM status was disabled in the
Master node.
Also call pm_runtime_no_callbacks() and pm_suspend_ignore_children()
for the master node to not have any callback addition and ignore the
children to have runtime PM work just locally in the driver. This
should be generic and common change for all i3c devices and should
not have any other impact.
With these changes, I3C client device works and able to invoke
master driver registered runtime PM callbacks.
Signed-off-by: Mukesh Kumar Savaliya <quic_msavaliy@quicinc.com>
Link: https://lore.kernel.org/r/20240228093407.4038399-1-quic_msavaliy@quicinc.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
In an In-Band Interrupt (IBI) handle, the code logic is as follows:
1: writel(SVC_I3C_MCTRL_REQUEST_AUTO_IBI | SVC_I3C_MCTRL_IBIRESP_AUTO,
master->regs + SVC_I3C_MCTRL);
2: ret = readl_relaxed_poll_timeout(master->regs + SVC_I3C_MSTATUS, val,
SVC_I3C_MSTATUS_IBIWON(val), 0, 1000);
...
3: ibitype = SVC_I3C_MSTATUS_IBITYPE(status);
ibiaddr = SVC_I3C_MSTATUS_IBIADDR(status);
SVC_I3C_MSTATUS_IBIWON may be set before step 1. Thus, step 2 will return
immediately, and the I3C controller has not sent out the 9th SCL yet.
Consequently, ibitype and ibiaddr are 0, resulting in an unknown IBI type
occurrence and missing call I3C client driver's IBI handler.
A typical case is that SVC_I3C_MSTATUS_IBIWON is set when an IBI occurs
during the controller send start frame in svc_i3c_master_xfer().
Clear SVC_I3C_MSTATUS_IBIWON before issue SVC_I3C_MCTRL_REQUEST_AUTO_IBI
to fix this issue.
Cc: stable@vger.kernel.org
Fixes: 5e5e3c92e7 ("i3c: master: svc: fix wrong data return when IBI happen during start frame")
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20240506164009.21375-3-Frank.Li@nxp.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
svc_i3c_master_xfer() returns error ENXIO if an In-Band Interrupt (IBI)
occurs when the host starts the frame.
Change error code to EAGAIN to inform the client driver that this
situation has occurred and to try again sometime later.
Fixes: 5e5e3c92e7 ("i3c: master: svc: fix wrong data return when IBI happen during start frame")
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20240506164009.21375-2-Frank.Li@nxp.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
In accordance with I3C spec ver 1.1.1 09-Jun-2021, section: 5.1.2.2.3, if
a target requests hot join (HJ), In-Band Interrupt (IBI), or controller
role request (CRR) during the emission of an I3C address in
i3c_device_do_priv_xfers(), the target may win bus arbitration. In such
cases, it is imperative to notify the I3C client driver and retry
i3c_device_do_priv_xfers() after some delay.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20240506164009.21375-1-Frank.Li@nxp.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Use '%pD' to print out the filename, and print out the actual offset
within the file too, rather than just what the virtual address of the
mapping is (which doesn't tell you anything about any mapping offsets).
Also, use the exact vma_lookup() instead of find_vma() - the latter
looks up any vma _after_ the address, which is of questionable value
(yes, maybe you fell off the beginning, but you'd be more likely to fall
off the end).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge trivial x86 code generation annoyances
- Introduce helper macros for clang asm input problems
- use said macros to improve trivially stupid code generation issues in
bitops and array_index_mask_nospec
- also improve codegen with 32-bit array index comparisons
None of these really matter, but I look at code generation and profiles
fairly regularly, and these misfeatures caused the generated code to
look really odd and distract from the real issues.
* branch 'x86-codegen' of local tree:
x86: improve bitop code generation with clang
x86: improve array_index_mask_nospec() code generation
clang: work around asm input constraint problems
