Commit graph

8 commits

Author SHA1 Message Date
Thomas Gleixner
d2912cb15b treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500
Based on 2 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation #

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 4122 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-19 17:09:55 +02:00
Doron Roberts-Kedes
7170e6045a strparser: Add __strp_unpause and use it in ktls.
strp_unpause queues strp_work in order to parse any messages that
arrived while the strparser was paused. However, the process invoking
strp_unpause could eagerly parse a buffered message itself if it held
the sock lock.

__strp_unpause is an alternative to strp_pause that avoids the scheduling
overhead that results when a receiving thread unpauses the strparser
and waits for the next message to be delivered by the workqueue thread.

This patch more than doubled the IOPS achieved in a benchmark of NBD
traffic encrypted using ktls.

Signed-off-by: Doron Roberts-Kedes <doronrk@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-06 14:07:53 -04:00
Tom Herbert
829385f08a strparser: Use delayed work instead of timer for msg timeout
Sock lock may be taken in the message timer function which is a
problem since timers run in BH. Instead of timers use delayed_work.

Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Fixes: bbb03029a8 ("strparser: Generalize strparser")
Signed-off-by: Tom Herbert <tom@quantonium.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-25 10:37:11 +09:00
Eric Biggers
3fd8712707 strparser: initialize all callbacks
commit bbb03029a8 ("strparser: Generalize strparser") added more
function pointers to 'struct strp_callbacks'; however, kcm_attach() was
not updated to initialize them.  This could cause the ->lock() and/or
->unlock() function pointers to be set to garbage values, causing a
crash in strp_work().

Fix the bug by moving the callback structs into static memory, so
unspecified members are zeroed.  Also constify them while we're at it.

This bug was found by syzkaller, which encountered the following splat:

    IP: 0x55
    PGD 3b1ca067
    P4D 3b1ca067
    PUD 3b12f067
    PMD 0

    Oops: 0010 [#1] SMP KASAN
    Dumping ftrace buffer:
       (ftrace buffer empty)
    Modules linked in:
    CPU: 2 PID: 1194 Comm: kworker/u8:1 Not tainted 4.13.0-rc4-next-20170811 #2
    Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
    Workqueue: kstrp strp_work
    task: ffff88006bb0e480 task.stack: ffff88006bb10000
    RIP: 0010:0x55
    RSP: 0018:ffff88006bb17540 EFLAGS: 00010246
    RAX: dffffc0000000000 RBX: ffff88006ce4bd60 RCX: 0000000000000000
    RDX: 1ffff1000d9c97bd RSI: 0000000000000000 RDI: ffff88006ce4bc48
    RBP: ffff88006bb17558 R08: ffffffff81467ab2 R09: 0000000000000000
    R10: ffff88006bb17438 R11: ffff88006bb17940 R12: ffff88006ce4bc48
    R13: ffff88003c683018 R14: ffff88006bb17980 R15: ffff88003c683000
    FS:  0000000000000000(0000) GS:ffff88006de00000(0000) knlGS:0000000000000000
    CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
    CR2: 0000000000000055 CR3: 000000003c145000 CR4: 00000000000006e0
    DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
    DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
    Call Trace:
     process_one_work+0xbf3/0x1bc0 kernel/workqueue.c:2098
     worker_thread+0x223/0x1860 kernel/workqueue.c:2233
     kthread+0x35e/0x430 kernel/kthread.c:231
     ret_from_fork+0x2a/0x40 arch/x86/entry/entry_64.S:431
    Code:  Bad RIP value.
    RIP: 0x55 RSP: ffff88006bb17540
    CR2: 0000000000000055
    ---[ end trace f0e4920047069cee ]---

Here is a C reproducer (requires CONFIG_BPF_SYSCALL=y and
CONFIG_AF_KCM=y):

    #include <linux/bpf.h>
    #include <linux/kcm.h>
    #include <linux/types.h>
    #include <stdint.h>
    #include <sys/ioctl.h>
    #include <sys/socket.h>
    #include <sys/syscall.h>
    #include <unistd.h>

    static const struct bpf_insn bpf_insns[3] = {
        { .code = 0xb7 }, /* BPF_MOV64_IMM(0, 0) */
        { .code = 0x95 }, /* BPF_EXIT_INSN() */
    };

    static const union bpf_attr bpf_attr = {
        .prog_type = 1,
        .insn_cnt = 2,
        .insns = (uintptr_t)&bpf_insns,
        .license = (uintptr_t)"",
    };

    int main(void)
    {
        int bpf_fd = syscall(__NR_bpf, BPF_PROG_LOAD,
                             &bpf_attr, sizeof(bpf_attr));
        int inet_fd = socket(AF_INET, SOCK_STREAM, 0);
        int kcm_fd = socket(AF_KCM, SOCK_DGRAM, 0);

        ioctl(kcm_fd, SIOCKCMATTACH,
              &(struct kcm_attach) { .fd = inet_fd, .bpf_fd = bpf_fd });
    }

Fixes: bbb03029a8 ("strparser: Generalize strparser")
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Tom Herbert <tom@quantonium.net>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-24 21:57:50 -07:00
Tom Herbert
bbb03029a8 strparser: Generalize strparser
Generalize strparser from more than just being used in conjunction
with read_sock. strparser will also be used in the send path with
zero proxy. The primary change is to create strp_process function
that performs the critical processing on skbs. The documentation
is also updated to reflect the new uses.

Signed-off-by: Tom Herbert <tom@quantonium.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-01 15:26:19 -07:00
Tom Herbert
96a5908347 kcm: Remove TCP specific references from kcm and strparser
kcm and strparser need to work with any type of stream socket not just
TCP. Eliminate references to TCP and call generic proto_ops functions of
read_sock and peek_len. Also in strp_init check if the socket support
the proto_ops read_sock and peek_len.

Signed-off-by: Tom Herbert <tom@herbertland.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-28 23:32:41 -04:00
Tom Herbert
cff6a334e6 strparser: Queue work when being unpaused
When the upper layer unpauses a stream parser connection we need to
queue rx_work to make sure no events are missed.

Signed-off-by: Tom Herbert <tom@herbertland.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-23 16:23:12 -07:00
Tom Herbert
43a0c6751a strparser: Stream parser for messages
This patch introduces a utility for parsing application layer protocol
messages in a TCP stream. This is a generalization of the mechanism
implemented of Kernel Connection Multiplexor.

The API includes a context structure, a set of callbacks, utility
functions, and a data ready function.

A stream parser instance is defined by a strparse structure that
is bound to a TCP socket. The function to initialize the structure
is:

int strp_init(struct strparser *strp, struct sock *csk,
              struct strp_callbacks *cb);

csk is the TCP socket being bound to and cb are the parser callbacks.

The upper layer calls strp_tcp_data_ready when data is ready on the lower
socket for strparser to process. This should be called from a data_ready
callback that is set on the socket:

void strp_tcp_data_ready(struct strparser *strp);

A parser is bound to a TCP socket by setting data_ready function to
strp_tcp_data_ready so that all receive indications on the socket
go through the parser. This is assumes that sk_user_data is set to
the strparser structure.

There are four callbacks.
 - parse_msg is called to parse the message (returns length or error).
 - rcv_msg is called when a complete message has been received
 - read_sock_done is called when data_ready function exits
 - abort_parser is called to abort the parser

The input to parse_msg is an skbuff which contains next message under
construction. The backend processing of parse_msg will parse the
application layer protocol headers to determine the length of
the message in the stream. The possible return values are:

   >0 : indicates length of successfully parsed message
   0  : indicates more data must be received to parse the message
   -ESTRPIPE : current message should not be processed by the
      kernel, return control of the socket to userspace which
      can proceed to read the messages itself
   other < 0 : Error is parsing, give control back to userspace
      assuming that synchronzation is lost and the stream
      is unrecoverable (application expected to close TCP socket)

In the case of error return (< 0) strparse will stop the parser
and report and error to userspace. The application must deal
with the error. To handle the error the strparser is unbound
from the TCP socket. If the error indicates that the stream
TCP socket is at recoverable point (ESTRPIPE) then the application
can read the TCP socket to process the stream. Once the application
has dealt with the exceptions in the stream, it may again bind the
socket to a strparser to continue data operations.

Note that ENODATA may be returned to the application. In this case
parse_msg returned -ESTRPIPE, however strparser was unable to maintain
synchronization of the stream (i.e. some of the message in question
was already read by the parser).

strp_pause and strp_unpause are used to provide flow control. For
instance, if rcv_msg is called but the upper layer can't immediately
consume the message it can hold the message and pause strparser.

Signed-off-by: Tom Herbert <tom@herbertland.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-17 19:36:23 -04:00