IMA measures contents of a given file/buffer/critical-data record,
and properly re-measures it on change. However, IMA does not measure
the duplicate value for a given record, since TPM extend is a very
expensive operation. For example, if the record changes from value
'v#1' to 'v#2', and then back to 'v#1', IMA will not measure and log
the last change to 'v#1', since the hash of 'v#1' for that record is
already present in the IMA htable. This limits the ability of an
external attestation service to accurately determine the current state
of the system. The service would incorrectly conclude that the latest
value of the given record on the system is 'v#2', and act accordingly.
Define and use a new Kconfig option IMA_DISABLE_HTABLE to permit
duplicate records in the IMA measurement list.
In addition to the duplicate measurement records described above,
other duplicate file measurement records may be included in the log,
when CONFIG_IMA_DISABLE_HTABLE is enabled. For example,
- i_version is not enabled,
- i_generation changed,
- same file present on different filesystems,
- an inode is evicted from dcache
Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
Reviewed-by: Petr Vorel <pvorel@suse.cz>
[zohar@linux.ibm.com: updated list of duplicate measurement records]
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
The function prototype for ima_add_kexec_buffer() is present
in 'linux/ima.h'. But this header file is not included in
ima_kexec.c where the function is implemented. This results
in the following compiler warning when "-Wmissing-prototypes" flag
is turned on:
security/integrity/ima/ima_kexec.c:81:6: warning: no previous prototype
for function 'ima_add_kexec_buffer' [-Wmissing-prototypes]
Include the header file 'linux/ima.h' in ima_kexec.c to fix
the compiler warning.
Fixes: dce92f6b11 (arm64: Enable passing IMA log to next kernel on kexec)
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Mark safesetid_initialized as __initdata since it is only used
in initialization routine.
Signed-off-by: Austin Kim <austindh.kim@gmail.com>
Signed-off-by: Micah Morton <mortonm@chromium.org>
In preparation to enable -Wimplicit-fallthrough for Clang, fix a
fall-through warning by explicitly adding a break statement instead
of just letting the code fall through to the next case.
Link: https://github.com/KSPP/linux/issues/115
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
This patch fixes the sparse warning for ima_post_key_create_or_update() by
adding the header file that defines the prototype (linux/ima.h).
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
The endianness of a variable written to the measurement list cannot be
determined at compile time, as it depends on the value of the
ima_canonical_fmt global variable (set through a kernel option with the
same name if the machine is big endian).
If ima_canonical_fmt is false, the endianness of a variable is the same as
the machine; if ima_canonical_fmt is true, the endianness is little endian.
The warning arises due to this type of instruction:
var = cpu_to_leXX(var)
which tries to assign a value in little endian to a variable with native
endianness (little or big endian).
Given that the variables set with this instruction are not used in any
operation but just written to a buffer, it is safe to force the type of the
value being set to be the same of the type of the variable with:
var = (__force <var type>)cpu_to_leXX(var)
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
The code expects that the values being parsed from a buffer when the
ima_canonical_fmt global variable is true are in little endian. Thus, this
patch sets the casting types accordingly.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Fix gcc W=1 warning:
security/smack/smack_access.c:342: warning: Function parameter or member 'ad' not described in 'smack_log'
security/smack/smack_access.c:403: warning: Function parameter or member 'skp' not described in 'smk_insert_entry'
security/smack/smack_access.c:487: warning: Function parameter or member 'level' not described in 'smk_netlbl_mls'
security/smack/smack_access.c:487: warning: Function parameter or member 'len' not described in 'smk_netlbl_mls'
Signed-off-by: ChenXiaoSong <chenxiaosong2@huawei.com>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
This patch avoids that evm_write_xattrs() returns an error when audit is
not enabled. The ab variable can be NULL and still be passed to the other
audit_log_() functions, as those functions do not include any instruction.
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
With the recent introduction of the evmsig template field, remote verifiers
can obtain the EVM portable signature instead of the IMA signature, to
verify file metadata.
After introducing the new fields to include file metadata in the
measurement list, this patch finally defines the evm-sig template, whose
format is:
d-ng|n-ng|evmsig|xattrnames|xattrlengths|xattrvalues|iuid|igid|imode
xattrnames, xattrlengths and xattrvalues are populated only from defined
EVM protected xattrs, i.e. the ones that EVM considers to verify the
portable signature. xattrnames and xattrlengths are populated only if the
xattr is present.
xattrnames and xattrlengths are not necessary for verifying the EVM
portable signature, but they are included for completeness of information,
if a remote verifier wants to infer more from file metadata.
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
This patch defines the new template fields xattrnames, xattrlengths and
xattrvalues, which contain respectively a list of xattr names (strings,
separated by |), lengths (u32, hex) and values (hex). If an xattr is not
present, the name and length are not displayed in the measurement list.
Reported-by: kernel test robot <lkp@intel.com> (Missing prototype def)
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Currently, the evm_config_default_xattrnames array contains xattr names
only related to LSMs which are enabled in the kernel configuration.
However, EVM portable signatures do not depend on local information and a
vendor might include in the signature calculation xattrs that are not
enabled in the target platform.
Just including all xattrs names in evm_config_default_xattrnames is not a
safe approach, because a target system might have already calculated
signatures or HMACs based only on the enabled xattrs. After applying this
patch, EVM would verify those signatures and HMACs with all xattrs instead.
The non-enabled ones, which could possibly exist, would cause a
verification error.
Thus, this patch adds a new field named enabled to the xattr_list
structure, which is set to true if the LSM associated to a given xattr name
is enabled in the kernel configuration. The non-enabled xattrs are taken
into account only in evm_calc_hmac_or_hash(), if the passed security.evm
type is EVM_XATTR_PORTABLE_DIGSIG.
The new function evm_protected_xattr_if_enabled() has been defined so that
IMA can include all protected xattrs and not only the enabled ones in the
measurement list, if the new template fields xattrnames, xattrlengths or
xattrvalues have been included in the template format.
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
This patch defines the new template field imode, which includes the
inode mode. It can be used by a remote verifier to verify the EVM portable
signature, if it was included with the template fields sig or evmsig.
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
This patch defines the new template fields iuid and igid, which include
respectively the inode UID and GID. For idmapped mounts, still the original
UID and GID are provided.
These fields can be used to verify the EVM portable signature, if it was
included with the template fields sig or evmsig.
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
This patch introduces the new function ima_show_template_uint(). This can
be used for showing integers of different sizes in ASCII format. The
function ima_show_template_data_ascii() automatically determines how to
print a stored integer by checking the integer size.
If integers have been written in canonical format,
ima_show_template_data_ascii() calls the appropriate leXX_to_cpu() function
to correctly display the value.
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Files might come from a remote source and might have xattrs, including
security.ima. It should not be IMA task to decide whether security.ima
should be kept or not. This patch removes the removexattr() system
call in ima_inode_post_setattr().
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
With the patch to accept EVM portable signatures when the
appraise_type=imasig requirement is specified in the policy, appraisal can
be successfully done even if the file does not have an IMA signature.
However, remote attestation would not see that a different signature type
was used, as only IMA signatures can be included in the measurement list.
This patch solves the issue by introducing the new template field 'evmsig'
to show EVM portable signatures and by including its value in the existing
field 'sig' if the IMA signature is not found.
Suggested-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
System administrators can require that all accessed files have a signature
by specifying appraise_type=imasig in a policy rule.
Currently, IMA signatures satisfy this requirement. Appended signatures may
also satisfy this requirement, but are not applicable as IMA signatures.
IMA/appended signatures ensure data source authentication for file content
and prevent any change. EVM signatures instead ensure data source
authentication for file metadata. Given that the digest or signature of the
file content must be included in the metadata, EVM signatures provide the
same file data guarantees of IMA signatures, as well as providing file
metadata guarantees.
This patch lets systems protected with EVM signatures pass appraisal
verification if the appraise_type=imasig requirement is specified in the
policy. This facilitates deployment in the scenarios where only EVM
signatures are available.
The patch makes the following changes:
file xattr types:
security.ima: IMA_XATTR_DIGEST/IMA_XATTR_DIGEST_NG
security.evm: EVM_XATTR_PORTABLE_DIGSIG
execve(), mmap(), open() behavior (with appraise_type=imasig):
before: denied (file without IMA signature, imasig requirement not met)
after: allowed (file with EVM portable signature, imasig requirement met)
open(O_WRONLY) behavior (without appraise_type=imasig):
before: allowed (file without IMA signature, not immutable)
after: denied (file with EVM portable signature, immutable)
In addition, similarly to IMA signatures, this patch temporarily allows
new files without or with incomplete metadata to be opened so that content
can be written.
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
With the patch to allow xattr/attr operations if a portable signature
verification fails, cp and tar can copy all xattrs/attrs so that at the
end of the process verification succeeds.
However, it might happen that the xattrs/attrs are already set to the
correct value (taken at signing time) and signature verification succeeds
before the copy has completed. For example, an archive might contains files
owned by root and the archive is extracted by root.
Then, since portable signatures are immutable, all subsequent operations
fail (e.g. fchown()), even if the operation is legitimate (does not alter
the current value).
This patch avoids this problem by reporting successful operation to user
space when that operation does not alter the current value of xattrs/attrs.
With this patch, the one that introduces evm_hmac_disabled() and the one
that allows a metadata operation on the INTEGRITY_FAIL_IMMUTABLE error, EVM
portable signatures can be used without disabling metadata verification
(by setting EVM_ALLOW_METADATA_WRITES). Due to keeping metadata
verification enabled, altering immutable metadata protected with a portable
signature that was successfully verified will be denied (existing
behavior).
Reported-by: kernel test robot <lkp@intel.com> [implicit declaration of function]
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Reviewed-by: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
In preparation for 'evm: Allow setxattr() and setattr() for unmodified
metadata', this patch passes mnt_userns to the inode set/remove xattr hooks
so that the GID of the inode on an idmapped mount is correctly determined
by posix_acl_update_mode().
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Reviewed-by: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
If files with portable signatures are copied from one location to another
or are extracted from an archive, verification can temporarily fail until
all xattrs/attrs are set in the destination. Only portable signatures may
be moved or copied from one file to another, as they don't depend on
system-specific information such as the inode generation. Instead portable
signatures must include security.ima.
Unlike other security.evm types, EVM portable signatures are also
immutable. Thus, it wouldn't be a problem to allow xattr/attr operations
when verification fails, as portable signatures will never be replaced with
the HMAC on possibly corrupted xattrs/attrs.
This patch first introduces a new integrity status called
INTEGRITY_FAIL_IMMUTABLE, that allows callers of
evm_verify_current_integrity() to detect that a portable signature didn't
pass verification and then adds an exception in evm_protect_xattr() and
evm_inode_setattr() for this status and returns 0 instead of -EPERM.
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
When a file is being created, LSMs can set the initial label with the
inode_init_security hook. If no HMAC key is loaded, the new file will have
LSM xattrs but not the HMAC. It is also possible that the file remains
without protected xattrs after creation if no active LSM provided it, or
because the filesystem does not support them.
Unfortunately, EVM will deny any further metadata operation on new files,
as evm_protect_xattr() will return the INTEGRITY_NOLABEL error if protected
xattrs exist without security.evm, INTEGRITY_NOXATTRS if no protected
xattrs exist or INTEGRITY_UNKNOWN if xattrs are not supported. This would
limit the usability of EVM when only a public key is loaded, as commands
such as cp or tar with the option to preserve xattrs won't work.
This patch introduces the evm_hmac_disabled() function to determine whether
or not it is safe to ignore verification errors, based on the ability of
EVM to calculate HMACs. If the HMAC key is not loaded, and it cannot be
loaded in the future due to the EVM_SETUP_COMPLETE initialization flag,
allowing an operation despite the attrs/xattrs being found invalid will not
make them valid.
Since the post hooks can be executed even when the HMAC key is not loaded,
this patch also ensures that the EVM_INIT_HMAC initialization flag is set
before the post hooks call evm_update_evmxattr().
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Suggested-by: Mimi Zohar <zohar@linux.ibm.com> (for ensuring EVM_INIT_HMAC is set)
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
When EVM_ALLOW_METADATA_WRITES is set, EVM allows any operation on
metadata. Its main purpose is to allow users to freely set metadata when it
is protected by a portable signature, until an HMAC key is loaded.
However, callers of evm_verifyxattr() are not notified about metadata
changes and continue to rely on the last status returned by the function.
For example IMA, since it caches the appraisal result, will not call again
evm_verifyxattr() until the appraisal flags are cleared, and will grant
access to the file even if there was a metadata operation that made the
portable signature invalid.
This patch introduces evm_revalidate_status(), which callers of
evm_verifyxattr() can use in their xattr hooks to determine whether
re-validation is necessary and to do the proper actions. IMA calls it in
its xattr hooks to reset the appraisal flags, so that the EVM status is
re-evaluated after a metadata operation.
Lastly, this patch also adds a call to evm_reset_status() in
evm_inode_post_setattr() to invalidate the cached EVM status after a
setattr operation.
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
EVM_ALLOW_METADATA_WRITES is an EVM initialization flag that can be set to
temporarily disable metadata verification until all xattrs/attrs necessary
to verify an EVM portable signature are copied to the file. This flag is
cleared when EVM is initialized with an HMAC key, to avoid that the HMAC is
calculated on unverified xattrs/attrs.
Currently EVM unnecessarily denies setting this flag if EVM is initialized
with a public key, which is not a concern as it cannot be used to trust
xattrs/attrs updates. This patch removes this limitation.
Fixes: ae1ba1676b ("EVM: Allow userland to permit modification of EVM-protected metadata")
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Cc: stable@vger.kernel.org # 4.16.x
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
The public builtin keys do not need to be appraised by IMA as the
restriction on the IMA/EVM trusted keyrings ensures that a key can be
loaded only if it is signed with a key on the builtin or secondary
keyrings.
However, when evm_load_x509() is called, appraisal is already enabled and
a valid IMA signature must be added to the EVM key to pass verification.
Since the restriction is applied on both IMA and EVM trusted keyrings, it
is safe to disable appraisal also when the EVM key is loaded. This patch
calls evm_load_x509() inside ima_load_x509() if CONFIG_IMA_LOAD_X509 is
enabled, which crosses the normal IMA and EVM boundary.
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
evm_inode_init_security() requires an HMAC key to calculate the HMAC on
initial xattrs provided by LSMs. However, it checks generically whether a
key has been loaded, including also public keys, which is not correct as
public keys are not suitable to calculate the HMAC.
Originally, support for signature verification was introduced to verify a
possibly immutable initial ram disk, when no new files are created, and to
switch to HMAC for the root filesystem. By that time, an HMAC key should
have been loaded and usable to calculate HMACs for new files.
More recently support for requiring an HMAC key was removed from the
kernel, so that signature verification can be used alone. Since this is a
legitimate use case, evm_inode_init_security() should not return an error
when no HMAC key has been loaded.
This patch fixes this problem by replacing the evm_key_loaded() check with
a check of the EVM_INIT_HMAC flag in evm_initialized.
Fixes: 26ddabfe96 ("evm: enable EVM when X509 certificate is loaded")
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Cc: stable@vger.kernel.org # 4.5.x
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
EVM_SETUP_COMPLETE is defined as 0x80000000, which is larger than INT_MAX.
The "-fno-strict-overflow" compiler option properly prevents signaling
EVM that the EVM policy setup is complete. Define and read an unsigned
int.
Fixes: f00d797507 ("EVM: Allow userspace to signal an RSA key has been loaded")
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
This reverts commit 942cb357ae.
The io_uring PF_IO_WORKER threads no longer have PF_KTHREAD set, so no
need to special case them for credential checks.
Cc: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Using get_unaligned() on a u8 pointer is pointless, and will
result in a compiler warning after a planned cleanup:
In file included from arch/x86/include/generated/asm/unaligned.h:1,
from security/apparmor/policy_unpack.c:16:
security/apparmor/policy_unpack.c: In function 'unpack_u8':
include/asm-generic/unaligned.h:13:15: error: 'packed' attribute ignored for field of type 'u8' {aka 'unsigned char'} [-Werror=attributes]
13 | const struct { type x __packed; } *__pptr = (typeof(__pptr))(ptr); \
| ^
Simply dereference this pointer directly.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: John Johansen <john.johansen@canonical.com>
While trying to address a Coverity warning that the dev_name string
might end up unterminated when strcpy'ing it in
selinux_ib_endport_manage_subnet(), I realized that it is possible (and
simpler) to just pass the dev_name pointer directly, rather than copying
the string to a buffer.
The ibendport variable goes out of scope at the end of the function
anyway, so the lifetime of the dev_name pointer will never be shorter
than that of ibendport, thus we can safely just pass the dev_name
pointer and be done with it.
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Acked-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
The `tpm_get_ops` call at the beginning of the function is not paired
with a `tpm_put_ops` on this return path.
Cc: stable@vger.kernel.org
Fixes: f221974525 ("security: keys: trusted: use ASN.1 TPM2 key format for the blobs")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Ben Boeckel <mathstuf@gmail.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Two error return paths are neglecting to free allocated object td,
causing a memory leak. Fix this by returning via the error return
path that securely kfree's td.
Fixes clang scan-build warning:
security/keys/trusted-keys/trusted_tpm1.c:496:10: warning: Potential
memory leak [unix.Malloc]
Cc: stable@vger.kernel.org
Fixes: 5df16caada ("KEYS: trusted: Fix incorrect handling of tpm_get_random()")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Variable rc is set to '-EINVAL' but this value is never read as
it is overwritten or not used later on, hence it is a redundant
assignment and can be removed.
Cleans up the following clang-analyzer warning:
security/selinux/ss/services.c:2103:3: warning: Value stored to 'rc' is
never read [clang-analyzer-deadcode.DeadStores].
security/selinux/ss/services.c:2079:2: warning: Value stored to 'rc' is
never read [clang-analyzer-deadcode.DeadStores].
security/selinux/ss/services.c:2071:2: warning: Value stored to 'rc' is
never read [clang-analyzer-deadcode.DeadStores].
security/selinux/ss/services.c:2062:2: warning: Value stored to 'rc' is
never read [clang-analyzer-deadcode.DeadStores].
security/selinux/ss/policydb.c:2592:3: warning: Value stored to 'rc' is
never read [clang-analyzer-deadcode.DeadStores].
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Minor documentation update.
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Paul Moore <paul@paul-moore.com>
seliunx_xfrm_policy_lookup() is hooks of security_xfrm_policy_lookup().
The dir argument is uselss in security_xfrm_policy_lookup(). So
remove the dir argument from selinux_xfrm_policy_lookup() and
security_xfrm_policy_lookup().
Signed-off-by: Zhongjun Tan <tanzhongjun@yulong.com>
[PM: reformat the subject line]
Signed-off-by: Paul Moore <paul@paul-moore.com>
We can do the allocation + copying of expr.nodes in one go using
kmemdup().
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
A typo is found out by codespell tool in 383th line of smackfs.c:
$ codespell ./security/smack/
./smackfs.c:383: numer ==> number
Fix a typo found by codespell.
Signed-off-by: Xiong Zhenwu <xiong.zhenwu@zte.com.cn>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
This pull request just has a single 3-line code cleanup CL to eliminate
some unnecessary 'break' statements. No other work was done on SafeSetID
for the v5.13 merge window.
-----BEGIN PGP SIGNATURE-----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=w90S
-----END PGP SIGNATURE-----
Merge tag 'safesetid-5.13' of git://github.com/micah-morton/linux
Pull SafeSetID update from Micah Morton:
"Simple code cleanup
This just has a single three-line code cleanup to eliminate some
unnecessary 'break' statements"
* tag 'safesetid-5.13' of git://github.com/micah-morton/linux:
LSM: SafeSetID: Fix code specification by scripts/checkpatch.pl
Pull misc vfs updates from Al Viro:
"Assorted stuff all over the place"
* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
useful constants: struct qstr for ".."
hostfs_open(): don't open-code file_dentry()
whack-a-mole: kill strlen_user() (again)
autofs: should_expire() argument is guaranteed to be positive
apparmor:match_mn() - constify devpath argument
buffer: a small optimization in grow_buffers
get rid of autofs_getpath()
constify dentry argument of dentry_path()/dentry_path_raw()
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEgycj0O+d1G2aycA8rZhLv9lQBTwFAmCInP4ACgkQrZhLv9lQ
BTza0g//dTeb9woC9H7qlEhK4l9yk62lTss60Q8X7m7ZSNfdL4tiEbi64SgK+iOW
OOegbrOEb8Kzh4KJJYmVlVZ5YUWyH4szgmee1wnylBdsWiWaPLPF3Cflz77apy6T
TiiBsJd7rRE29FKheaMt34B41BMh8QHESN+DzjzJWsFoi/uNxjgSs2W16XuSupKu
bpRmB1pYNXMlrkzz7taL05jndZYE5arVriqlxgAsuLOFOp/ER7zecrjImdCM/4kL
W6ej0R1fz2Geh6CsLBJVE+bKWSQ82q5a4xZEkSYuQHXgZV5eywE5UKu8ssQcRgQA
VmGUY5k73rfY9Ofupf2gCaf/JSJNXKO/8Xjg0zAdklKtmgFjtna5Tyg9I90j7zn+
5swSpKuRpilN8MQH+6GWAnfqQlNoviTOpFeq3LwBtNVVOh08cOg6lko/bmebBC+R
TeQPACKS0Q0gCDPm9RYoU1pMUuYgfOwVfVRZK1prgi2Co7ZBUMOvYbNoKYoPIydr
ENBYljlU1OYwbzgR2nE+24fvhU8xdNOVG1xXYPAEHShu+p7dLIWRLhl8UCtRQpSR
1ofeVaJjgjrp29O+1OIQjB2kwCaRdfv/Gq1mztE/VlMU/r++E62OEzcH0aS+mnrg
yzfyUdI8IFv1q6FGT9yNSifWUWxQPmOKuC8kXsKYfqfJsFwKmHM=
=uCN4
-----END PGP SIGNATURE-----
Merge tag 'landlock_v34' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
Pull Landlock LSM from James Morris:
"Add Landlock, a new LSM from Mickaël Salaün.
Briefly, Landlock provides for unprivileged application sandboxing.
From Mickaël's cover letter:
"The goal of Landlock is to enable to restrict ambient rights (e.g.
global filesystem access) for a set of processes. Because Landlock
is a stackable LSM [1], it makes possible to create safe security
sandboxes as new security layers in addition to the existing
system-wide access-controls. This kind of sandbox is expected to
help mitigate the security impact of bugs or unexpected/malicious
behaviors in user-space applications. Landlock empowers any
process, including unprivileged ones, to securely restrict
themselves.
Landlock is inspired by seccomp-bpf but instead of filtering
syscalls and their raw arguments, a Landlock rule can restrict the
use of kernel objects like file hierarchies, according to the
kernel semantic. Landlock also takes inspiration from other OS
sandbox mechanisms: XNU Sandbox, FreeBSD Capsicum or OpenBSD
Pledge/Unveil.
In this current form, Landlock misses some access-control features.
This enables to minimize this patch series and ease review. This
series still addresses multiple use cases, especially with the
combined use of seccomp-bpf: applications with built-in sandboxing,
init systems, security sandbox tools and security-oriented APIs [2]"
The cover letter and v34 posting is here:
https://lore.kernel.org/linux-security-module/20210422154123.13086-1-mic@digikod.net/
See also:
https://landlock.io/
This code has had extensive design discussion and review over several
years"
Link: https://lore.kernel.org/lkml/50db058a-7dde-441b-a7f9-f6837fe8b69f@schaufler-ca.com/ [1]
Link: https://lore.kernel.org/lkml/f646e1c7-33cf-333f-070c-0a40ad0468cd@digikod.net/ [2]
* tag 'landlock_v34' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
landlock: Enable user space to infer supported features
landlock: Add user and kernel documentation
samples/landlock: Add a sandbox manager example
selftests/landlock: Add user space tests
landlock: Add syscall implementations
arch: Wire up Landlock syscalls
fs,security: Add sb_delete hook
landlock: Support filesystem access-control
LSM: Infrastructure management of the superblock
landlock: Add ptrace restrictions
landlock: Set up the security framework and manage credentials
landlock: Add ruleset and domain management
landlock: Add object management
-----BEGIN PGP SIGNATURE-----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=gkFF
-----END PGP SIGNATURE-----
Merge tag 'integrity-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity
Pull IMA updates from Mimi Zohar:
"In addition to loading the kernel module signing key onto the builtin
keyring, load it onto the IMA keyring as well.
Also six trivial changes and bug fixes"
* tag 'integrity-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
ima: ensure IMA_APPRAISE_MODSIG has necessary dependencies
ima: Fix fall-through warnings for Clang
integrity: Add declarations to init_once void arguments.
ima: Fix function name error in comment.
ima: enable loading of build time generated key on .ima keyring
ima: enable signing of modules with build time generated key
keys: cleanup build time module signing keys
ima: Fix the error code for restoring the PCR value
ima: without an IMA policy loaded, return quickly
Core:
- bpf:
- allow bpf programs calling kernel functions (initially to
reuse TCP congestion control implementations)
- enable task local storage for tracing programs - remove the
need to store per-task state in hash maps, and allow tracing
programs access to task local storage previously added for
BPF_LSM
- add bpf_for_each_map_elem() helper, allowing programs to
walk all map elements in a more robust and easier to verify
fashion
- sockmap: support UDP and cross-protocol BPF_SK_SKB_VERDICT
redirection
- lpm: add support for batched ops in LPM trie
- add BTF_KIND_FLOAT support - mostly to allow use of BTF
on s390 which has floats in its headers files
- improve BPF syscall documentation and extend the use of kdoc
parsing scripts we already employ for bpf-helpers
- libbpf, bpftool: support static linking of BPF ELF files
- improve support for encapsulation of L2 packets
- xdp: restructure redirect actions to avoid a runtime lookup,
improving performance by 4-8% in microbenchmarks
- xsk: build skb by page (aka generic zerocopy xmit) - improve
performance of software AF_XDP path by 33% for devices
which don't need headers in the linear skb part (e.g. virtio)
- nexthop: resilient next-hop groups - improve path stability
on next-hops group changes (incl. offload for mlxsw)
- ipv6: segment routing: add support for IPv4 decapsulation
- icmp: add support for RFC 8335 extended PROBE messages
- inet: use bigger hash table for IP ID generation
- tcp: deal better with delayed TX completions - make sure we don't
give up on fast TCP retransmissions only because driver is
slow in reporting that it completed transmitting the original
- tcp: reorder tcp_congestion_ops for better cache locality
- mptcp:
- add sockopt support for common TCP options
- add support for common TCP msg flags
- include multiple address ids in RM_ADDR
- add reset option support for resetting one subflow
- udp: GRO L4 improvements - improve 'forward' / 'frag_list'
co-existence with UDP tunnel GRO, allowing the first to take
place correctly even for encapsulated UDP traffic
- micro-optimize dev_gro_receive() and flow dissection, avoid
retpoline overhead on VLAN and TEB GRO
- use less memory for sysctls, add a new sysctl type, to allow using
u8 instead of "int" and "long" and shrink networking sysctls
- veth: allow GRO without XDP - this allows aggregating UDP
packets before handing them off to routing, bridge, OvS, etc.
- allow specifing ifindex when device is moved to another namespace
- netfilter:
- nft_socket: add support for cgroupsv2
- nftables: add catch-all set element - special element used
to define a default action in case normal lookup missed
- use net_generic infra in many modules to avoid allocating
per-ns memory unnecessarily
- xps: improve the xps handling to avoid potential out-of-bound
accesses and use-after-free when XPS change race with other
re-configuration under traffic
- add a config knob to turn off per-cpu netdev refcnt to catch
underflows in testing
Device APIs:
- add WWAN subsystem to organize the WWAN interfaces better and
hopefully start driving towards more unified and vendor-
-independent APIs
- ethtool:
- add interface for reading IEEE MIB stats (incl. mlx5 and
bnxt support)
- allow network drivers to dump arbitrary SFP EEPROM data,
current offset+length API was a poor fit for modern SFP
which define EEPROM in terms of pages (incl. mlx5 support)
- act_police, flow_offload: add support for packet-per-second
policing (incl. offload for nfp)
- psample: add additional metadata attributes like transit delay
for packets sampled from switch HW (and corresponding egress
and policy-based sampling in the mlxsw driver)
- dsa: improve support for sandwiched LAGs with bridge and DSA
- netfilter:
- flowtable: use direct xmit in topologies with IP
forwarding, bridging, vlans etc.
- nftables: counter hardware offload support
- Bluetooth:
- improvements for firmware download w/ Intel devices
- add support for reading AOSP vendor capabilities
- add support for virtio transport driver
- mac80211:
- allow concurrent monitor iface and ethernet rx decap
- set priority and queue mapping for injected frames
- phy: add support for Clause-45 PHY Loopback
- pci/iov: add sysfs MSI-X vector assignment interface
to distribute MSI-X resources to VFs (incl. mlx5 support)
New hardware/drivers:
- dsa: mv88e6xxx: add support for Marvell mv88e6393x -
11-port Ethernet switch with 8x 1-Gigabit Ethernet
and 3x 10-Gigabit interfaces.
- dsa: support for legacy Broadcom tags used on BCM5325, BCM5365
and BCM63xx switches
- Microchip KSZ8863 and KSZ8873; 3x 10/100Mbps Ethernet switches
- ath11k: support for QCN9074 a 802.11ax device
- Bluetooth: Broadcom BCM4330 and BMC4334
- phy: Marvell 88X2222 transceiver support
- mdio: add BCM6368 MDIO mux bus controller
- r8152: support RTL8153 and RTL8156 (USB Ethernet) chips
- mana: driver for Microsoft Azure Network Adapter (MANA)
- Actions Semi Owl Ethernet MAC
- can: driver for ETAS ES58X CAN/USB interfaces
Pure driver changes:
- add XDP support to: enetc, igc, stmmac
- add AF_XDP support to: stmmac
- virtio:
- page_to_skb() use build_skb when there's sufficient tailroom
(21% improvement for 1000B UDP frames)
- support XDP even without dedicated Tx queues - share the Tx
queues with the stack when necessary
- mlx5:
- flow rules: add support for mirroring with conntrack,
matching on ICMP, GTP, flex filters and more
- support packet sampling with flow offloads
- persist uplink representor netdev across eswitch mode
changes
- allow coexistence of CQE compression and HW time-stamping
- add ethtool extended link error state reporting
- ice, iavf: support flow filters, UDP Segmentation Offload
- dpaa2-switch:
- move the driver out of staging
- add spanning tree (STP) support
- add rx copybreak support
- add tc flower hardware offload on ingress traffic
- ionic:
- implement Rx page reuse
- support HW PTP time-stamping
- octeon: support TC hardware offloads - flower matching on ingress
and egress ratelimitting.
- stmmac:
- add RX frame steering based on VLAN priority in tc flower
- support frame preemption (FPE)
- intel: add cross time-stamping freq difference adjustment
- ocelot:
- support forwarding of MRP frames in HW
- support multiple bridges
- support PTP Sync one-step timestamping
- dsa: mv88e6xxx, dpaa2-switch: offload bridge port flags like
learning, flooding etc.
- ipa: add IPA v4.5, v4.9 and v4.11 support (Qualcomm SDX55, SM8350,
SC7280 SoCs)
- mt7601u: enable TDLS support
- mt76:
- add support for 802.3 rx frames (mt7915/mt7615)
- mt7915 flash pre-calibration support
- mt7921/mt7663 runtime power management fixes
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=vcbA
-----END PGP SIGNATURE-----
Merge tag 'net-next-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core:
- bpf:
- allow bpf programs calling kernel functions (initially to
reuse TCP congestion control implementations)
- enable task local storage for tracing programs - remove the
need to store per-task state in hash maps, and allow tracing
programs access to task local storage previously added for
BPF_LSM
- add bpf_for_each_map_elem() helper, allowing programs to walk
all map elements in a more robust and easier to verify fashion
- sockmap: support UDP and cross-protocol BPF_SK_SKB_VERDICT
redirection
- lpm: add support for batched ops in LPM trie
- add BTF_KIND_FLOAT support - mostly to allow use of BTF on
s390 which has floats in its headers files
- improve BPF syscall documentation and extend the use of kdoc
parsing scripts we already employ for bpf-helpers
- libbpf, bpftool: support static linking of BPF ELF files
- improve support for encapsulation of L2 packets
- xdp: restructure redirect actions to avoid a runtime lookup,
improving performance by 4-8% in microbenchmarks
- xsk: build skb by page (aka generic zerocopy xmit) - improve
performance of software AF_XDP path by 33% for devices which don't
need headers in the linear skb part (e.g. virtio)
- nexthop: resilient next-hop groups - improve path stability on
next-hops group changes (incl. offload for mlxsw)
- ipv6: segment routing: add support for IPv4 decapsulation
- icmp: add support for RFC 8335 extended PROBE messages
- inet: use bigger hash table for IP ID generation
- tcp: deal better with delayed TX completions - make sure we don't
give up on fast TCP retransmissions only because driver is slow in
reporting that it completed transmitting the original
- tcp: reorder tcp_congestion_ops for better cache locality
- mptcp:
- add sockopt support for common TCP options
- add support for common TCP msg flags
- include multiple address ids in RM_ADDR
- add reset option support for resetting one subflow
- udp: GRO L4 improvements - improve 'forward' / 'frag_list'
co-existence with UDP tunnel GRO, allowing the first to take place
correctly even for encapsulated UDP traffic
- micro-optimize dev_gro_receive() and flow dissection, avoid
retpoline overhead on VLAN and TEB GRO
- use less memory for sysctls, add a new sysctl type, to allow using
u8 instead of "int" and "long" and shrink networking sysctls
- veth: allow GRO without XDP - this allows aggregating UDP packets
before handing them off to routing, bridge, OvS, etc.
- allow specifing ifindex when device is moved to another namespace
- netfilter:
- nft_socket: add support for cgroupsv2
- nftables: add catch-all set element - special element used to
define a default action in case normal lookup missed
- use net_generic infra in many modules to avoid allocating
per-ns memory unnecessarily
- xps: improve the xps handling to avoid potential out-of-bound
accesses and use-after-free when XPS change race with other
re-configuration under traffic
- add a config knob to turn off per-cpu netdev refcnt to catch
underflows in testing
Device APIs:
- add WWAN subsystem to organize the WWAN interfaces better and
hopefully start driving towards more unified and vendor-
independent APIs
- ethtool:
- add interface for reading IEEE MIB stats (incl. mlx5 and bnxt
support)
- allow network drivers to dump arbitrary SFP EEPROM data,
current offset+length API was a poor fit for modern SFP which
define EEPROM in terms of pages (incl. mlx5 support)
- act_police, flow_offload: add support for packet-per-second
policing (incl. offload for nfp)
- psample: add additional metadata attributes like transit delay for
packets sampled from switch HW (and corresponding egress and
policy-based sampling in the mlxsw driver)
- dsa: improve support for sandwiched LAGs with bridge and DSA
- netfilter:
- flowtable: use direct xmit in topologies with IP forwarding,
bridging, vlans etc.
- nftables: counter hardware offload support
- Bluetooth:
- improvements for firmware download w/ Intel devices
- add support for reading AOSP vendor capabilities
- add support for virtio transport driver
- mac80211:
- allow concurrent monitor iface and ethernet rx decap
- set priority and queue mapping for injected frames
- phy: add support for Clause-45 PHY Loopback
- pci/iov: add sysfs MSI-X vector assignment interface to distribute
MSI-X resources to VFs (incl. mlx5 support)
New hardware/drivers:
- dsa: mv88e6xxx: add support for Marvell mv88e6393x - 11-port
Ethernet switch with 8x 1-Gigabit Ethernet and 3x 10-Gigabit
interfaces.
- dsa: support for legacy Broadcom tags used on BCM5325, BCM5365 and
BCM63xx switches
- Microchip KSZ8863 and KSZ8873; 3x 10/100Mbps Ethernet switches
- ath11k: support for QCN9074 a 802.11ax device
- Bluetooth: Broadcom BCM4330 and BMC4334
- phy: Marvell 88X2222 transceiver support
- mdio: add BCM6368 MDIO mux bus controller
- r8152: support RTL8153 and RTL8156 (USB Ethernet) chips
- mana: driver for Microsoft Azure Network Adapter (MANA)
- Actions Semi Owl Ethernet MAC
- can: driver for ETAS ES58X CAN/USB interfaces
Pure driver changes:
- add XDP support to: enetc, igc, stmmac
- add AF_XDP support to: stmmac
- virtio:
- page_to_skb() use build_skb when there's sufficient tailroom
(21% improvement for 1000B UDP frames)
- support XDP even without dedicated Tx queues - share the Tx
queues with the stack when necessary
- mlx5:
- flow rules: add support for mirroring with conntrack, matching
on ICMP, GTP, flex filters and more
- support packet sampling with flow offloads
- persist uplink representor netdev across eswitch mode changes
- allow coexistence of CQE compression and HW time-stamping
- add ethtool extended link error state reporting
- ice, iavf: support flow filters, UDP Segmentation Offload
- dpaa2-switch:
- move the driver out of staging
- add spanning tree (STP) support
- add rx copybreak support
- add tc flower hardware offload on ingress traffic
- ionic:
- implement Rx page reuse
- support HW PTP time-stamping
- octeon: support TC hardware offloads - flower matching on ingress
and egress ratelimitting.
- stmmac:
- add RX frame steering based on VLAN priority in tc flower
- support frame preemption (FPE)
- intel: add cross time-stamping freq difference adjustment
- ocelot:
- support forwarding of MRP frames in HW
- support multiple bridges
- support PTP Sync one-step timestamping
- dsa: mv88e6xxx, dpaa2-switch: offload bridge port flags like
learning, flooding etc.
- ipa: add IPA v4.5, v4.9 and v4.11 support (Qualcomm SDX55, SM8350,
SC7280 SoCs)
- mt7601u: enable TDLS support
- mt76:
- add support for 802.3 rx frames (mt7915/mt7615)
- mt7915 flash pre-calibration support
- mt7921/mt7663 runtime power management fixes"
* tag 'net-next-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2451 commits)
net: selftest: fix build issue if INET is disabled
net: netrom: nr_in: Remove redundant assignment to ns
net: tun: Remove redundant assignment to ret
net: phy: marvell: add downshift support for M88E1240
net: dsa: ksz: Make reg_mib_cnt a u8 as it never exceeds 255
net/sched: act_ct: Remove redundant ct get and check
icmp: standardize naming of RFC 8335 PROBE constants
bpf, selftests: Update array map tests for per-cpu batched ops
bpf: Add batched ops support for percpu array
bpf: Implement formatted output helpers with bstr_printf
seq_file: Add a seq_bprintf function
sfc: adjust efx->xdp_tx_queue_count with the real number of initialized queues
net:nfc:digital: Fix a double free in digital_tg_recv_dep_req
net: fix a concurrency bug in l2tp_tunnel_register()
net/smc: Remove redundant assignment to rc
mpls: Remove redundant assignment to err
llc2: Remove redundant assignment to rc
net/tls: Remove redundant initialization of record
rds: Remove redundant assignment to nr_sig
dt-bindings: net: mdio-gpio: add compatible for microchip,mdio-smi0
...
- Refactoring powerpc and arm64 kexec DT handling to common code. This
enables IMA on arm64.
- Add kbuild support for applying DT overlays at build time. The first
user are the DT unittests.
- Fix kerneldoc formatting and W=1 warnings in drivers/of/
- Fix handling 64-bit flag on PCI resources
- Bump dtschema version required to v2021.2.1
- Enable undocumented compatible checks for dtbs_check. This allows
tracking of missing binding schemas.
- DT docs improvements. Regroup the DT docs and add the example schema
and DT kernel ABI docs to the doc build.
- Convert Broadcom Bluetooth and video-mux bindings to schema
- Add QCom sm8250 Venus video codec binding schema
- Add vendor prefixes for AESOP, YIC System Co., Ltd, and Siliconfile
Technologies Inc.
- Cleanup of DT schema type references on common properties and
standard unit properties
-----BEGIN PGP SIGNATURE-----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=rF27
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
- Refactor powerpc and arm64 kexec DT handling to common code. This
enables IMA on arm64.
- Add kbuild support for applying DT overlays at build time. The first
user are the DT unittests.
- Fix kerneldoc formatting and W=1 warnings in drivers/of/
- Fix handling 64-bit flag on PCI resources
- Bump dtschema version required to v2021.2.1
- Enable undocumented compatible checks for dtbs_check. This allows
tracking of missing binding schemas.
- DT docs improvements. Regroup the DT docs and add the example schema
and DT kernel ABI docs to the doc build.
- Convert Broadcom Bluetooth and video-mux bindings to schema
- Add QCom sm8250 Venus video codec binding schema
- Add vendor prefixes for AESOP, YIC System Co., Ltd, and Siliconfile
Technologies Inc.
- Cleanup of DT schema type references on common properties and
standard unit properties
* tag 'devicetree-for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (64 commits)
powerpc: If kexec_build_elf_info() fails return immediately from elf64_load()
powerpc: Free fdt on error in elf64_load()
of: overlay: Fix kerneldoc warning in of_overlay_remove()
of: linux/of.h: fix kernel-doc warnings
of/pci: Add IORESOURCE_MEM_64 to resource flags for 64-bit memory addresses
dt-bindings: bcm4329-fmac: add optional brcm,ccode-map
docs: dt: update writing-schema.rst references
dt-bindings: media: venus: Add sm8250 dt schema
of: base: Fix spelling issue with function param 'prop'
docs: dt: Add DT API documentation
of: Add missing 'Return' section in kerneldoc comments
of: Fix kerneldoc output formatting
docs: dt: Group DT docs into relevant sub-sections
docs: dt: Make 'Devicetree' wording more consistent
docs: dt: writing-schema: Include the example schema in the doc build
docs: dt: writing-schema: Remove spurious indentation
dt-bindings: Fix reference in submitting-patches.rst to the DT ABI doc
dt-bindings: ddr: Add optional manufacturer and revision ID to LPDDR3
dt-bindings: media: video-interfaces: Drop the example
devicetree: bindings: clock: Minor typo fix in the file armada3700-tbg-clock.txt
...
-----BEGIN PGP SIGNATURE-----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=HTEy
-----END PGP SIGNATURE-----
Merge tag 'selinux-pr-20210426' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull selinux updates from Paul Moore:
- Add support for measuring the SELinux state and policy capabilities
using IMA.
- A handful of SELinux/NFS patches to compare the SELinux state of one
mount with a set of mount options. Olga goes into more detail in the
patch descriptions, but this is important as it allows more
flexibility when using NFS and SELinux context mounts.
- Properly differentiate between the subjective and objective LSM
credentials; including support for the SELinux and Smack. My clumsy
attempt at a proper fix for AppArmor didn't quite pass muster so John
is working on a proper AppArmor patch, in the meantime this set of
patches shouldn't change the behavior of AppArmor in any way. This
change explains the bulk of the diffstat beyond security/.
- Fix a problem where we were not properly terminating the permission
list for two SELinux object classes.
* tag 'selinux-pr-20210426' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: add proper NULL termination to the secclass_map permissions
smack: differentiate between subjective and objective task credentials
selinux: clarify task subjective and objective credentials
lsm: separate security_task_getsecid() into subjective and objective variants
nfs: account for selinux security context when deciding to share superblock
nfs: remove unneeded null check in nfs_fill_super()
lsm,selinux: add new hook to compare new mount to an existing mount
selinux: fix misspellings using codespell tool
selinux: fix misspellings using codespell tool
selinux: measure state and policy capabilities
selinux: Allow context mounts for unpriviliged overlayfs
First, the code is found to be irregular through checkpatch.pl.
Then I found break is really useless here.
Signed-off-by: Yanwei Gao <gaoyanwei.tx@gmail.com>
Signed-off-by: Micah Morton <mortonm@chromium.org>
Pull crypto updates from Herbert Xu:
"API:
- crypto_destroy_tfm now ignores errors as well as NULL pointers
Algorithms:
- Add explicit curve IDs in ECDH algorithm names
- Add NIST P384 curve parameters
- Add ECDSA
Drivers:
- Add support for Green Sardine in ccp
- Add ecdh/curve25519 to hisilicon/hpre
- Add support for AM64 in sa2ul"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (184 commits)
fsverity: relax build time dependency on CRYPTO_SHA256
fscrypt: relax Kconfig dependencies for crypto API algorithms
crypto: camellia - drop duplicate "depends on CRYPTO"
crypto: s5p-sss - consistently use local 'dev' variable in probe()
crypto: s5p-sss - remove unneeded local variable initialization
crypto: s5p-sss - simplify getting of_device_id match data
ccp: ccp - add support for Green Sardine
crypto: ccp - Make ccp_dev_suspend and ccp_dev_resume void functions
crypto: octeontx2 - add support for OcteonTX2 98xx CPT block.
crypto: chelsio/chcr - Remove useless MODULE_VERSION
crypto: ux500/cryp - Remove duplicate argument
crypto: chelsio - remove unused function
crypto: sa2ul - Add support for AM64
crypto: sa2ul - Support for per channel coherency
dt-bindings: crypto: ti,sa2ul: Add new compatible for AM64
crypto: hisilicon - enable new error types for QM
crypto: hisilicon - add new error type for SEC
crypto: hisilicon - support new error types for ZIP
crypto: hisilicon - dynamic configuration 'err_info'
crypto: doc - fix kernel-doc notation in chacha.c and af_alg.c
...
-----BEGIN PGP SIGNATURE-----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=fLQY
-----END PGP SIGNATURE-----
Merge tag 'keys-cve-2020-26541-v3' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull x509 dbx/mokx UEFI support from David Howells:
"Here's a set of patches from Eric Snowberg[1] that add support for
EFI_CERT_X509_GUID entries in the dbx and mokx UEFI tables (such
entries cause matching certificates to be rejected).
These are currently ignored and only the hash entries are made use of.
Additionally Eric included his patches to allow such certificates to
be preloaded.
These patches deal with CVE-2020-26541.
To quote Eric:
'This is the fifth patch series for adding support for
EFI_CERT_X509_GUID entries [2]. It has been expanded to not only
include dbx entries but also entries in the mokx. Additionally
my series to preload these certificate [3] has also been
included'"
Link: https://lore.kernel.org/r/20210122181054.32635-1-eric.snowberg@oracle.com [1]
Link: https://patchwork.kernel.org/project/linux-security-module/patch/20200916004927.64276-1-eric.snowberg@oracle.com/ [2]
Link: https://lore.kernel.org/patchwork/cover/1315485/ [3]
* tag 'keys-cve-2020-26541-v3' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
integrity: Load mokx variables into the blacklist keyring
certs: Add ability to preload revocation certs
certs: Move load_system_certificate_list to a common function
certs: Add EFI_CERT_X509_GUID support for dbx entries
Fix a regression in the TPM trusted keys caused by the generic rework
to add ARM TEE based trusted keys. Without this fix, the TPM trusted
key subsystem fails to add or load any keys.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCYINO/CYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishYvuAP418ooC
6CeoWs/GLXchG/Do412JBLuPJBg3BOrXqUqMTQD/TmfcbQ8r+WRmuaVsweptQhKx
7IYnETpAGgP7fGh4Dss=
=gvsH
-----END PGP SIGNATURE-----
Merge tag 'queue' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/tpmdd
Pull tpm fixes from James Bottomley:
"Fix a regression in the TPM trusted keys caused by the generic rework
to add ARM TEE based trusted keys.
Without this fix, the TPM trusted key subsystem fails to add or load
any keys"
* tag 'queue' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/tpmdd:
KEYS: trusted: fix TPM trusted keys for generic framework
-----BEGIN PGP SIGNATURE-----
iIgEABYIADAWIQRE6pSOnaBC00OEHEIaerohdGur0gUCYHbwjxIcamFya2tvQGtl
cm5lbC5vcmcACgkQGnq6IXRrq9KQvAD/chBQK3FrcaWYLmPEY8y/6mo2ZByPUv5D
paLXgBkeFU0A/Rti+rATM7n95hgCIlTILK1boXvv0FBJTts0ZHUyZykG
=03e0
-----END PGP SIGNATURE-----
Merge tag 'tpmdd-next-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull tpm updates from Jarkko Sakkinen:
"New features:
- ARM TEE backend for kernel trusted keys to complete the existing
TPM backend
- ASN.1 format for TPM2 trusted keys to make them interact with the
user space stack, such as OpenConnect VPN
Other than that, a bunch of bug fixes"
* tag 'tpmdd-next-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
KEYS: trusted: Fix missing null return from kzalloc call
char: tpm: fix error return code in tpm_cr50_i2c_tis_recv()
MAINTAINERS: Add entry for TEE based Trusted Keys
doc: trusted-encrypted: updates with TEE as a new trust source
KEYS: trusted: Introduce TEE based Trusted Keys
KEYS: trusted: Add generic trusted keys framework
security: keys: trusted: Make sealed key properly interoperable
security: keys: trusted: use ASN.1 TPM2 key format for the blobs
security: keys: trusted: fix TPM2 authorizations
oid_registry: Add TCG defined OIDS for TPM keys
lib: Add ASN.1 encoder
tpm: vtpm_proxy: Avoid reading host log when using a virtual device
tpm: acpi: Check eventlog signature before using it
tpm: efi: Use local variable for calculating final log size
Add a new flag LANDLOCK_CREATE_RULESET_VERSION to
landlock_create_ruleset(2). This enables to retreive a Landlock ABI
version that is useful to efficiently follow a best-effort security
approach. Indeed, it would be a missed opportunity to abort the whole
sandbox building, because some features are unavailable, instead of
protecting users as much as possible with the subset of features
provided by the running kernel.
This new flag enables user space to identify the minimum set of Landlock
features supported by the running kernel without relying on a filesystem
interface (e.g. /proc/version, which might be inaccessible) nor testing
multiple syscall argument combinations (i.e. syscall bisection). New
Landlock features will be documented and tied to a minimum version
number (greater than 1). The current version will be incremented for
each new kernel release supporting new Landlock features. User space
libraries can leverage this information to seamlessly restrict processes
as much as possible while being compatible with newer APIs.
This is a much more lighter approach than the previous
landlock_get_features(2): the complexity is pushed to user space
libraries. This flag meets similar needs as securityfs versions:
selinux/policyvers, apparmor/features/*/version* and tomoyo/version.
Supporting this flag now will be convenient for backward compatibility.
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: James Morris <jmorris@namei.org>
Cc: Jann Horn <jannh@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Serge E. Hallyn <serge@hallyn.com>
Signed-off-by: Mickaël Salaün <mic@linux.microsoft.com>
Link: https://lore.kernel.org/r/20210422154123.13086-14-mic@digikod.net
Signed-off-by: James Morris <jamorris@linux.microsoft.com>
These 3 system calls are designed to be used by unprivileged processes
to sandbox themselves:
* landlock_create_ruleset(2): Creates a ruleset and returns its file
descriptor.
* landlock_add_rule(2): Adds a rule (e.g. file hierarchy access) to a
ruleset, identified by the dedicated file descriptor.
* landlock_restrict_self(2): Enforces a ruleset on the calling thread
and its future children (similar to seccomp). This syscall has the
same usage restrictions as seccomp(2): the caller must have the
no_new_privs attribute set or have CAP_SYS_ADMIN in the current user
namespace.
All these syscalls have a "flags" argument (not currently used) to
enable extensibility.
Here are the motivations for these new syscalls:
* A sandboxed process may not have access to file systems, including
/dev, /sys or /proc, but it should still be able to add more
restrictions to itself.
* Neither prctl(2) nor seccomp(2) (which was used in a previous version)
fit well with the current definition of a Landlock security policy.
All passed structs (attributes) are checked at build time to ensure that
they don't contain holes and that they are aligned the same way for each
architecture.
See the user and kernel documentation for more details (provided by a
following commit):
* Documentation/userspace-api/landlock.rst
* Documentation/security/landlock.rst
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: James Morris <jmorris@namei.org>
Cc: Jann Horn <jannh@google.com>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Mickaël Salaün <mic@linux.microsoft.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
Link: https://lore.kernel.org/r/20210422154123.13086-9-mic@digikod.net
Signed-off-by: James Morris <jamorris@linux.microsoft.com>
The sb_delete security hook is called when shutting down a superblock,
which may be useful to release kernel objects tied to the superblock's
lifetime (e.g. inodes).
This new hook is needed by Landlock to release (ephemerally) tagged
struct inodes. This comes from the unprivileged nature of Landlock
described in the next commit.
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: James Morris <jmorris@namei.org>
Signed-off-by: Mickaël Salaün <mic@linux.microsoft.com>
Reviewed-by: Jann Horn <jannh@google.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210422154123.13086-7-mic@digikod.net
Signed-off-by: James Morris <jamorris@linux.microsoft.com>
Using Landlock objects and ruleset, it is possible to tag inodes
according to a process's domain. To enable an unprivileged process to
express a file hierarchy, it first needs to open a directory (or a file)
and pass this file descriptor to the kernel through
landlock_add_rule(2). When checking if a file access request is
allowed, we walk from the requested dentry to the real root, following
the different mount layers. The access to each "tagged" inodes are
collected according to their rule layer level, and ANDed to create
access to the requested file hierarchy. This makes possible to identify
a lot of files without tagging every inodes nor modifying the
filesystem, while still following the view and understanding the user
has from the filesystem.
Add a new ARCH_EPHEMERAL_INODES for UML because it currently does not
keep the same struct inodes for the same inodes whereas these inodes are
in use.
This commit adds a minimal set of supported filesystem access-control
which doesn't enable to restrict all file-related actions. This is the
result of multiple discussions to minimize the code of Landlock to ease
review. Thanks to the Landlock design, extending this access-control
without breaking user space will not be a problem. Moreover, seccomp
filters can be used to restrict the use of syscall families which may
not be currently handled by Landlock.
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: James Morris <jmorris@namei.org>
Cc: Jann Horn <jannh@google.com>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Serge E. Hallyn <serge@hallyn.com>
Signed-off-by: Mickaël Salaün <mic@linux.microsoft.com>
Link: https://lore.kernel.org/r/20210422154123.13086-8-mic@digikod.net
Signed-off-by: James Morris <jamorris@linux.microsoft.com>
Move management of the superblock->sb_security blob out of the
individual security modules and into the security infrastructure.
Instead of allocating the blobs from within the modules, the modules
tell the infrastructure how much space is required, and the space is
allocated there.
Cc: John Johansen <john.johansen@canonical.com>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Mickaël Salaün <mic@linux.microsoft.com>
Reviewed-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210422154123.13086-6-mic@digikod.net
Signed-off-by: James Morris <jamorris@linux.microsoft.com>
Using ptrace(2) and related debug features on a target process can lead
to a privilege escalation. Indeed, ptrace(2) can be used by an attacker
to impersonate another task and to remain undetected while performing
malicious activities. Thanks to ptrace_may_access(), various part of
the kernel can check if a tracer is more privileged than a tracee.
A landlocked process has fewer privileges than a non-landlocked process
and must then be subject to additional restrictions when manipulating
processes. To be allowed to use ptrace(2) and related syscalls on a
target process, a landlocked process must have a subset of the target
process's rules (i.e. the tracee must be in a sub-domain of the tracer).
Cc: James Morris <jmorris@namei.org>
Signed-off-by: Mickaël Salaün <mic@linux.microsoft.com>
Reviewed-by: Jann Horn <jannh@google.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210422154123.13086-5-mic@digikod.net
Signed-off-by: James Morris <jamorris@linux.microsoft.com>
Process's credentials point to a Landlock domain, which is underneath
implemented with a ruleset. In the following commits, this domain is
used to check and enforce the ptrace and filesystem security policies.
A domain is inherited from a parent to its child the same way a thread
inherits a seccomp policy.
Cc: James Morris <jmorris@namei.org>
Signed-off-by: Mickaël Salaün <mic@linux.microsoft.com>
Reviewed-by: Jann Horn <jannh@google.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210422154123.13086-4-mic@digikod.net
Signed-off-by: James Morris <jamorris@linux.microsoft.com>
A Landlock ruleset is mainly a red-black tree with Landlock rules as
nodes. This enables quick update and lookup to match a requested
access, e.g. to a file. A ruleset is usable through a dedicated file
descriptor (cf. following commit implementing syscalls) which enables a
process to create and populate a ruleset with new rules.
A domain is a ruleset tied to a set of processes. This group of rules
defines the security policy enforced on these processes and their future
children. A domain can transition to a new domain which is the
intersection of all its constraints and those of a ruleset provided by
the current process. This modification only impact the current process.
This means that a process can only gain more constraints (i.e. lose
accesses) over time.
Cc: James Morris <jmorris@namei.org>
Signed-off-by: Mickaël Salaün <mic@linux.microsoft.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Jann Horn <jannh@google.com>
Link: https://lore.kernel.org/r/20210422154123.13086-3-mic@digikod.net
Signed-off-by: James Morris <jamorris@linux.microsoft.com>
A Landlock object enables to identify a kernel object (e.g. an inode).
A Landlock rule is a set of access rights allowed on an object. Rules
are grouped in rulesets that may be tied to a set of processes (i.e.
subjects) to enforce a scoped access-control (i.e. a domain).
Because Landlock's goal is to empower any process (especially
unprivileged ones) to sandbox themselves, we cannot rely on a
system-wide object identification such as file extended attributes.
Indeed, we need innocuous, composable and modular access-controls.
The main challenge with these constraints is to identify kernel objects
while this identification is useful (i.e. when a security policy makes
use of this object). But this identification data should be freed once
no policy is using it. This ephemeral tagging should not and may not be
written in the filesystem. We then need to manage the lifetime of a
rule according to the lifetime of its objects. To avoid a global lock,
this implementation make use of RCU and counters to safely reference
objects.
A following commit uses this generic object management for inodes.
Cc: James Morris <jmorris@namei.org>
Signed-off-by: Mickaël Salaün <mic@linux.microsoft.com>
Reviewed-by: Jann Horn <jannh@google.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210422154123.13086-2-mic@digikod.net
Signed-off-by: James Morris <jamorris@linux.microsoft.com>
This patch adds the missing NULL termination to the "bpf" and
"perf_event" object class permission lists.
This missing NULL termination should really only affect the tools
under scripts/selinux, with the most important being genheaders.c,
although in practice this has not been an issue on any of my dev/test
systems. If the problem were to manifest itself it would likely
result in bogus permissions added to the end of the object class;
thankfully with no access control checks using these bogus
permissions and no policies defining these permissions the impact
would likely be limited to some noise about undefined permissions
during policy load.
Cc: stable@vger.kernel.org
Fixes: ec27c3568a ("selinux: bpf: Add selinux check for eBPF syscall operations")
Fixes: da97e18458 ("perf_event: Add support for LSM and SELinux checks")
Signed-off-by: Paul Moore <paul@paul-moore.com>
The generic framework patch broke the current TPM trusted keys because
it doesn't correctly remove the values consumed by the generic parser
before passing them on to the implementation specific parser. Fix
this by having the generic parser return the string minus the consumed
tokens.
Additionally, there may be no tokens left for the implementation
specific parser, so make it handle the NULL case correctly and finally
fix a TPM 1.2 specific check for no keyhandle.
Fixes: 5d0682be31 ("KEYS: trusted: Add generic trusted keys framework")
Tested-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
The original patch 8c657a0590 ("KEYS: trusted: Reserve TPM for seal
and unseal operations") was correct on the mailing list:
https://lore.kernel.org/linux-integrity/20210128235621.127925-4-jarkko@kernel.org/
But somehow got rebased so that the tpm_try_get_ops() in
tpm2_seal_trusted() got lost. This causes an imbalanced put of the
TPM ops and causes oopses on TIS based hardware.
This fix puts back the lost tpm_try_get_ops()
Fixes: 8c657a0590 ("KEYS: trusted: Reserve TPM for seal and unseal operations")
Reported-by: Mimi Zohar <zohar@linux.ibm.com>
Acked-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
In preparation to enable -Wimplicit-fallthrough for Clang, fix multiple
warnings by explicitly adding multiple break statements instead of just
letting the code fall through to the next case.
Link: https://github.com/KSPP/linux/issues/115
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
- keep the ZC code, drop the code related to reinit
net/bridge/netfilter/ebtables.c
- fix build after move to net_generic
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
CONFIG_KASAN_STACK and CONFIG_KASAN_STACK_ENABLE both enable KASAN stack
instrumentation, but we should only need one config, so that we remove
CONFIG_KASAN_STACK_ENABLE and make CONFIG_KASAN_STACK workable. see [1].
When enable KASAN stack instrumentation, then for gcc we could do no
prompt and default value y, and for clang prompt and default value n.
This patch fixes the following compilation warning:
include/linux/kasan.h:333:30: warning: 'CONFIG_KASAN_STACK' is not defined, evaluates to 0 [-Wundef]
[akpm@linux-foundation.org: fix merge snafu]
Link: https://bugzilla.kernel.org/show_bug.cgi?id=210221 [1]
Link: https://lkml.kernel.org/r/20210226012531.29231-1-walter-zh.wu@mediatek.com
Fixes: d9b571c885 ("kasan: fix KASAN_STACK dependency for HW_TAGS")
Signed-off-by: Walter Wu <walter-zh.wu@mediatek.com>
Suggested-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix kernel-doc notation in commoncap.c.
Use correct (matching) function name in comments as in code.
Use correct function argument names in kernel-doc comments.
Use kernel-doc's "Return:" format for function return values.
Fixes these kernel-doc warnings:
../security/commoncap.c:1206: warning: expecting prototype for cap_task_ioprio(). Prototype was for cap_task_setioprio() instead
../security/commoncap.c:1219: warning: expecting prototype for cap_task_ioprio(). Prototype was for cap_task_setnice() instead
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Serge Hallyn <serge@hallyn.com>
Signed-off-by: James Morris <jamorris@linux.microsoft.com>
The kzalloc call can return null with the GFP_KERNEL flag so
add a null check and exit via a new error exit label. Use the
same exit error label for another error path too.
Addresses-Coverity: ("Dereference null return value")
Fixes: 830027e2cb55 ("KEYS: trusted: Add generic trusted keys framework")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Add support for TEE based trusted keys where TEE provides the functionality
to seal and unseal trusted keys using hardware unique key.
Refer to Documentation/staging/tee.rst for detailed information about TEE.
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Current trusted keys framework is tightly coupled to use TPM device as
an underlying implementation which makes it difficult for implementations
like Trusted Execution Environment (TEE) etc. to provide trusted keys
support in case platform doesn't posses a TPM device.
Add a generic trusted keys framework where underlying implementations
can be easily plugged in. Create struct trusted_key_ops to achieve this,
which contains necessary functions of a backend.
Also, define a module parameter in order to select a particular trust
source in case a platform support multiple trust sources. In case its
not specified then implementation itetrates through trust sources list
starting with TPM and assign the first trust source as a backend which
has initiazed successfully during iteration.
Note that current implementation only supports a single trust source at
runtime which is either selectable at compile time or during boot via
aforementioned module parameter.
Suggested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
The current implementation appends a migratable flag to the end of a
key, meaning the format isn't exactly interoperable because the using
party needs to know to strip this extra byte. However, all other
consumers of TPM sealed blobs expect the unseal to return exactly the
key. Since TPM2 keys have a key property flag that corresponds to
migratable, use that flag instead and make the actual key the only
sealed quantity. This is secure because the key properties are bound
to a hash in the private part, so if they're altered the key won't
load.
Backwards compatibility is implemented by detecting whether we're
loading a new format key or not and correctly setting migratable from
the last byte of old format keys.
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Modify the TPM2 key format blob output to export and import in the
ASN.1 form for TPM2 sealed object keys. For compatibility with prior
trusted keys, the importer will also accept two TPM2B quantities
representing the public and private parts of the key. However, the
export via keyctl pipe will only output the ASN.1 format.
The benefit of the ASN.1 format is that it's a standard and thus the
exported key can be used by userspace tools (openssl_tpm2_engine,
openconnect and tpm2-tss-engine). The format includes policy
specifications, thus it gets us out of having to construct policy
handles in userspace and the format includes the parent meaning you
don't have to keep passing it in each time.
This patch only implements basic handling for the ASN.1 format, so
keys with passwords but no policy.
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
In TPM 1.2 an authorization was a 20 byte number. The spec actually
recommended you to hash variable length passwords and use the sha1
hash as the authorization. Because the spec doesn't require this
hashing, the current authorization for trusted keys is a 40 digit hex
number. For TPM 2.0 the spec allows the passing in of variable length
passwords and passphrases directly, so we should allow that in trusted
keys for ease of use. Update the 'blobauth' parameter to take this
into account, so we can now use plain text passwords for the keys.
so before
keyctl add trusted kmk "new 32 blobauth=f572d396fae9206628714fb2ce00f72e94f2258fkeyhandle=81000001" @u
after we will accept both the old hex sha1 form as well as a new
directly supplied password:
keyctl add trusted kmk "new 32 blobauth=hello keyhandle=81000001" @u
Since a sha1 hex code must be exactly 40 bytes long and a direct
password must be 20 or less, we use the length as the discriminator
for which form is input.
Note this is both and enhancement and a potential bug fix. The TPM
2.0 spec requires us to strip leading zeros, meaning empyty
authorization is a zero length HMAC whereas we're currently passing in
20 bytes of zeros. A lot of TPMs simply accept this as OK, but the
Microsoft TPM emulator rejects it with TPM_RC_BAD_AUTH, so this patch
makes the Microsoft TPM emulator work with trusted keys.
Fixes: 0fe5480303 ("keys, trusted: seal/unseal with TPM 2.0 chips")
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Conflicts:
MAINTAINERS
- keep Chandrasekar
drivers/net/ethernet/mellanox/mlx5/core/en_main.c
- simple fix + trust the code re-added to param.c in -next is fine
include/linux/bpf.h
- trivial
include/linux/ethtool.h
- trivial, fix kdoc while at it
include/linux/skmsg.h
- move to relevant place in tcp.c, comment re-wrapped
net/core/skmsg.c
- add the sk = sk // sk = NULL around calls
net/tipc/crypto.c
- trivial
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=mGDl
-----END PGP SIGNATURE-----
Merge tag 'selinux-pr-20210409' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull selinux fixes from Paul Moore:
"Three SELinux fixes.
These fix known problems relating to (re)loading SELinux policy or
changing the policy booleans, and pass our test suite without problem"
* tag 'selinux-pr-20210409' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: fix race between old and new sidtab
selinux: fix cond_list corruption when changing booleans
selinux: make nslot handling in avtab more robust
init_once is a callback to kmem_cache_create. The parameter
type of this function is void *, so it's better to give a
explicit cast here.
Signed-off-by: Jiele Zhao <unclexiaole@gmail.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
The original function name was ima_path_check(). The policy parsing
still supports PATH_CHECK. Commit 9bbb6cad01 ("ima: rename
ima_path_check to ima_file_check") renamed the function to
ima_file_check(), but missed modifying the function name in the
comment.
Fixes: 9bbb6cad01 ("ima: rename ima_path_check to ima_file_check").
Signed-off-by: Jiele Zhao <unclexiaole@gmail.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
The kernel currently only loads the kernel module signing key onto the
builtin trusted keyring. Load the module signing key onto the IMA keyring
as well.
Signed-off-by: Nayna Jain <nayna@linux.ibm.com>
Acked-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Since commit 1b8b31a2e6 ("selinux: convert policy read-write lock to
RCU"), there is a small window during policy load where the new policy
pointer has already been installed, but some threads may still be
holding the old policy pointer in their read-side RCU critical sections.
This means that there may be conflicting attempts to add a new SID entry
to both tables via sidtab_context_to_sid().
See also (and the rest of the thread):
https://lore.kernel.org/selinux/CAFqZXNvfux46_f8gnvVvRYMKoes24nwm2n3sPbMjrB8vKTW00g@mail.gmail.com/
Fix this by installing the new policy pointer under the old sidtab's
spinlock along with marking the old sidtab as "frozen". Then, if an
attempt to add new entry to a "frozen" sidtab is detected, make
sidtab_context_to_sid() return -ESTALE to indicate that a new policy
has been installed and that the caller will have to abort the policy
transaction and try again after re-taking the policy pointer (which is
guaranteed to be a newer policy). This requires adding a retry-on-ESTALE
logic to all callers of sidtab_context_to_sid(), but fortunately these
are easy to determine and aren't that many.
This seems to be the simplest solution for this problem, even if it
looks somewhat ugly. Note that other places in the kernel (e.g.
do_mknodat() in fs/namei.c) use similar stale-retry patterns, so I think
it's reasonable.
Cc: stable@vger.kernel.org
Fixes: 1b8b31a2e6 ("selinux: convert policy read-write lock to RCU")
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Currently, duplicate_policydb_cond_list() first copies the whole
conditional avtab and then tries to link to the correct entries in
cond_dup_av_list() using avtab_search(). However, since the conditional
avtab may contain multiple entries with the same key, this approach
often fails to find the right entry, potentially leading to wrong rules
being activated/deactivated when booleans are changed.
To fix this, instead start with an empty conditional avtab and add the
individual entries one-by-one while building the new av_lists. This
approach leads to the correct result, since each entry is present in the
av_lists exactly once.
The issue can be reproduced with Fedora policy as follows:
# sesearch -s ftpd_t -t public_content_rw_t -c dir -p create -A
allow ftpd_t non_security_file_type:dir { add_name create getattr ioctl link lock open read remove_name rename reparent rmdir search setattr unlink watch watch_reads write }; [ ftpd_full_access ]:True
allow ftpd_t public_content_rw_t:dir { add_name create link remove_name rename reparent rmdir setattr unlink watch watch_reads write }; [ ftpd_anon_write ]:True
# setsebool ftpd_anon_write=off ftpd_connect_all_unreserved=off ftpd_connect_db=off ftpd_full_access=off
On fixed kernels, the sesearch output is the same after the setsebool
command:
# sesearch -s ftpd_t -t public_content_rw_t -c dir -p create -A
allow ftpd_t non_security_file_type:dir { add_name create getattr ioctl link lock open read remove_name rename reparent rmdir search setattr unlink watch watch_reads write }; [ ftpd_full_access ]:True
allow ftpd_t public_content_rw_t:dir { add_name create link remove_name rename reparent rmdir setattr unlink watch watch_reads write }; [ ftpd_anon_write ]:True
While on the broken kernels, it will be different:
# sesearch -s ftpd_t -t public_content_rw_t -c dir -p create -A
allow ftpd_t non_security_file_type:dir { add_name create getattr ioctl link lock open read remove_name rename reparent rmdir search setattr unlink watch watch_reads write }; [ ftpd_full_access ]:True
allow ftpd_t non_security_file_type:dir { add_name create getattr ioctl link lock open read remove_name rename reparent rmdir search setattr unlink watch watch_reads write }; [ ftpd_full_access ]:True
allow ftpd_t non_security_file_type:dir { add_name create getattr ioctl link lock open read remove_name rename reparent rmdir search setattr unlink watch watch_reads write }; [ ftpd_full_access ]:True
While there, also simplify the computation of nslots. This changes the
nslots values for nrules 2 or 3 to just two slots instead of 4, which
makes the sequence more consistent.
Cc: stable@vger.kernel.org
Fixes: c7c556f1e8 ("selinux: refactor changing booleans")
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
1. Make sure all fileds are initialized in avtab_init().
2. Slightly refactor avtab_alloc() to use the above fact.
3. Use h->nslot == 0 as a sentinel in the access functions to prevent
dereferencing h->htable when it's not allocated.
Cc: stable@vger.kernel.org
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Since commit 3bfe610669 ("io-wq: fork worker threads from original
task") stopped using PF_KTHREAD flag for the io_uring PF_IO_WORKER threads,
tomoyo_kernel_service() no longer needs to check PF_IO_WORKER flag.
(This is a 5.12+ patch. Please don't send to stable kernels.)
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Add support for IMA signature verification for EC keys. Since SHA type
of hashes can be used by RSA and ECDSA signature schemes we need to
look at the key and derive from the key which signature scheme to use.
Since this can be applied to all types of keys, we change the selection
of the encoding type to be driven by the key's signature scheme rather
than by the hash type.
Cc: Dmitry Kasatkin <dmitry.kasatkin@gmail.com>
Cc: linux-integrity@vger.kernel.org
Cc: David Howells <dhowells@redhat.com>
Cc: keyrings@vger.kernel.org
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Vitaly Chikunov <vt@altlinux.org>
Reviewed-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Acked-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-----BEGIN PGP SIGNATURE-----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=qVQp
-----END PGP SIGNATURE-----
Merge tag 'integrity-v5.12-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity
Pull integrity fix from Mimi Zohar:
"Just one patch to address a NULL ptr dereferencing when there is a
mismatch between the user enabled LSMs and IMA/EVM"
* tag 'integrity-v5.12-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
integrity: double check iint_cache was initialized
gcc-11 introdces a harmless warning for cap_inode_getsecurity:
security/commoncap.c: In function ‘cap_inode_getsecurity’:
security/commoncap.c:440:33: error: ‘memcpy’ reading 16 bytes from a region of size 0 [-Werror=stringop-overread]
440 | memcpy(&nscap->data, &cap->data, sizeof(__le32) * 2 * VFS_CAP_U32);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The problem here is that tmpbuf is initialized to NULL, so gcc assumes
it is not accessible unless it gets set by vfs_getxattr_alloc(). This is
a legitimate warning as far as I can tell, but the code is correct since
it correctly handles the error when that function fails.
Add a separate NULL check to tell gcc about it as well.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: James Morris <jamorris@linux.microsoft.com>
In ima_restore_measurement_list(), hdr[HDR_PCR].data is pointing to a
buffer of type u8, which contains the dumped 32-bit pcr value.
Currently, only the least significant byte is used to restore the pcr
value. We should convert hdr[HDR_PCR].data to a pointer of type u32
before fetching the value to restore the correct pcr value.
Fixes: 47fdee60b4 ("ima: use ima_parse_buf() to parse measurements headers")
Signed-off-by: Li Huafei <lihuafei1@huawei.com>
Reviewed-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
With the split of the security_task_getsecid() into subjective and
objective variants it's time to update Smack to ensure it is using
the correct task creds.
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: Richard Guy Briggs <rgb@redhat.com>
Reviewed-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
SELinux has a function, task_sid(), which returns the task's
objective credentials, but unfortunately is used in a few places
where the subjective task credentials should be used. Most notably
in the new security_task_getsecid_subj() LSM hook.
This patch fixes this and attempts to make things more obvious by
introducing a new function, task_sid_subj(), and renaming the
existing task_sid() function to task_sid_obj().
This patch also adds an interesting function in task_sid_binder().
The task_sid_binder() function has a comment which hopefully
describes it's reason for being, but it basically boils down to the
simple fact that we can't safely access another task's subjective
credentials so in the case of binder we need to stick with the
objective credentials regardless.
Reviewed-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Of the three LSMs that implement the security_task_getsecid() LSM
hook, all three LSMs provide the task's objective security
credentials. This turns out to be unfortunate as most of the hook's
callers seem to expect the task's subjective credentials, although
a small handful of callers do correctly expect the objective
credentials.
This patch is the first step towards fixing the problem: it splits
the existing security_task_getsecid() hook into two variants, one
for the subjective creds, one for the objective creds.
void security_task_getsecid_subj(struct task_struct *p,
u32 *secid);
void security_task_getsecid_obj(struct task_struct *p,
u32 *secid);
While this patch does fix all of the callers to use the correct
variant, in order to keep this patch focused on the callers and to
ease review, the LSMs continue to use the same implementation for
both hooks. The net effect is that this patch should not change
the behavior of the kernel in any way, it will be up to the latter
LSM specific patches in this series to change the hook
implementations and return the correct credentials.
Acked-by: Mimi Zohar <zohar@linux.ibm.com> (IMA)
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Add a new hook that takes an existing super block and a new mount
with new options and determines if new options confict with an
existing mount or not.
A filesystem can use this new hook to determine if it can share
the an existing superblock with a new superblock for the new mount.
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Acked-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
[PM: tweak the subject line, fix tab/space problems]
Signed-off-by: Paul Moore <paul@paul-moore.com>
-----BEGIN PGP SIGNATURE-----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=mFaE
-----END PGP SIGNATURE-----
Merge tag 'selinux-pr-20210322' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull selinux fixes from Paul Moore:
"Three SELinux patches:
- Fix a problem where a local variable is used outside its associated
function. Thankfully this can only be triggered by reloading the
SELinux policy, which is a restricted operation for other obvious
reasons.
- Fix some incorrect, and inconsistent, audit and printk messages
when loading the SELinux policy.
All three patches are relatively minor and have been through our
testing with no failures"
* tag 'selinux-pr-20210322' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinuxfs: unify policy load error reporting
selinux: fix variable scope issue in live sidtab conversion
selinux: don't log MAC_POLICY_LOAD record on failed policy load
Let's drop the pr_err()s from sel_make_policy_nodes() and just add one
pr_warn_ratelimited() call to the sel_make_policy_nodes() error path in
sel_write_load().
Changing from error to warning makes sense, since after 02a52c5c8c
("selinux: move policy commit after updating selinuxfs"), this error
path no longer leads to a broken selinuxfs tree (it's just kept in the
original state and policy load is aborted).
I also added _ratelimited to be consistent with the other prtin in the
same function (it's probably not necessary, but can't really hurt...
there are likely more important error messages to be printed when
filesystem entry creation starts erroring out).
Suggested-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
