Add check for the return value of kstrdup() and return the error
if it fails in order to avoid NULL pointer dereference.
Fixes: 563ca40ddf ("pstore/platform: Switch pstore_info::name to const")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Link: https://lore.kernel.org/r/20230623022706.32125-1-jiasheng@iscas.ac.cn
Signed-off-by: Kees Cook <keescook@chromium.org>
Commit 1756ddea69 ("pstore: Remove worst-case compression size logic")
removed some clunky per-algorithm worst case size estimation routines on
the basis that we can always store pstore records uncompressed, and
these worst case estimations are about how much the size might
inadvertently *increase* due to encapsulation overhead when the input
cannot be compressed at all. So if compression results in a size
increase, we just store the original data instead.
However, it seems that the original code was misinterpreting these
calculations as an estimation of how much uncompressed data might fit
into a compressed buffer of a given size, and it was using the results
to consume the input data in larger chunks than the pstore record size,
relying on the compression to ensure that what ultimately gets stored
fits into the available space.
One result of this, as observed and reported by Linus, is that upgrading
to a newer kernel that includes the given commit may result in pstore
decompression errors reported in the kernel log. This is due to the fact
that the existing records may unexpectedly decompress to a size that is
larger than the pstore record size.
Another potential problem caused by this change is that we may
underutilize the fixed sized records on pstore backends such as ramoops.
And on pstore backends with variable sized records such as EFI, we will
end up creating many more entries than before to store the same amount
of compressed data.
So let's fix both issues, by bringing back the typical case estimation of
how much ASCII text captured from the dmesg log might fit into a pstore
record of a given size after compression. The original implementation
used the computation given below for zlib:
switch (size) {
/* buffer range for efivars */
case 1000 ... 2000:
cmpr = 56;
break;
case 2001 ... 3000:
cmpr = 54;
break;
case 3001 ... 3999:
cmpr = 52;
break;
/* buffer range for nvram, erst */
case 4000 ... 10000:
cmpr = 45;
break;
default:
cmpr = 60;
break;
}
return (size * 100) / cmpr;
We will use the previous worst-case of 60% for compression. For
decompression go extra large (3x) so we make sure there's enough space
for anything.
While at it, rate limit the error message so we don't flood the log
unnecessarily on systems that have accumulated a lot of pstore history.
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Eric Biggers <ebiggers@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20230830212238.135900-1-ardb@kernel.org
Co-developed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Currently pstore record buffers are allocated using kmalloc() which has
a maximum size based on page size. If a large "pmsg-size" module
parameter is specified, pmsg will fail to copy the contents since
memdup_user() is limited to kmalloc() allocation sizes.
Since we don't need physically contiguous memory for any of the pstore
record buffers, use kvzalloc() to avoid such limitations in the core of
pstore and in the ram backend, and explicitly read from userspace using
vmemdup_user(). This also means that any other backends that want to
(or do already) support larger record sizes will Just Work now.
Signed-off-by: Yuxiao Zhang <yuxiaozhang@google.com>
Link: https://lore.kernel.org/r/20230627202540.881909-2-yuxiaozhang@google.com
Co-developed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Pstore supports compression using a variety of algorithms exposed by the
crypto API. This uses the deprecated comp (as opposed to scomp/acomp)
API, and so we should stop using that, and either move to the new API,
or switch to a different approach entirely.
Given that we only compress ASCII text in pstore, and considering that
this happens when the system is likely to be in an unstable state, the
flexibility that the complex crypto API provides does not outweigh its
impact on the risk that we might encounter additional problems when
trying to commit the kernel log contents to the pstore backend.
So let's switch [back] to the zlib deflate library API, and remove all
the complexity that really has no place in a low-level diagnostic
facility. Note that, while more modern compression algorithms have been
added to the kernel in recent years, the code size of zlib deflate is
substantially smaller than, e.g., zstd, while its performance in terms
of compression ratio is comparable for ASCII text, and speed is deemed
irrelevant in this context.
Note that this means that compressed pstore records may no longer be
accessible after a kernel upgrade, but this has never been part of the
contract. (The choice of compression algorithm is not stored in the
pstore records either)
Tested-by: "Guilherme G. Piccoli" <gpiccoli@igalia.com> # Steam Deck
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20230712162332.2670437-3-ardb@kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
The worst case compression size used by pstore gives an upper bound for
how much the data might inadvertently *grow* due to encapsulation
overhead if the input is not compressible at all.
Given that pstore records have individual 'compressed' flags, we can
simply store the uncompressed data if compressing it would end up using
more space, making the worst case identical to the uncompressed case.
This means we can just drop all the elaborate logic that reasons about
upper bounds for each individual compression algorithm, and just store
the uncompressed data directly if compression fails for any reason.
Co-developed-by: Kees Cook <keescook@chromium.org>
Tested-by: "Guilherme G. Piccoli" <gpiccoli@igalia.com> # Steam Deck
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20230712162332.2670437-2-ardb@kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
The pstore dump function doesn't alert at all on errors - despite
pstore is usually a last resource and if it fails users won't be
able to read the kernel log, this is not the case for server users
with serial access, for example.
So, let's at least attempt to inform such advanced users on the first
backend writing error detected during the kmsg dump - this is also
very useful for pstore debugging purposes.
Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20221013210648.137452-2-gpiccoli@igalia.com
Currently we only show the registered ones in the kernel
log; users that change backend for some reason require
first to unregister the current one, so let's confirm this
operation with a message in the log.
Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20221006224212.569555-4-gpiccoli@igalia.com
Currently this tuning is only exposed as a filesystem option,
but most Linux distros automatically mount pstore, hence changing
this setting requires remounting it. Also, if that mount option
wasn't explicitly set it doesn't show up in mount information,
so users cannot check what is the current value of kmsg_bytes.
Let's then expose it as a module parameter, allowing both user
visibility at all times (even if not manually set) and also the
possibility of setting that as a boot/module parameter.
Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20221006224212.569555-3-gpiccoli@igalia.com
The pstore infrastructure supports one single backend at a time;
trying to load a another backend causes an error and displays a
message, introduced on commit 0d7cd09a3d ("pstore: Improve
register_pstore() error reporting").
Happens that this message is not really clear about the situation,
also the current error returned (-EPERM) isn't accurate, whereas
-EBUSY makes more sense. We have another place in the code that
relies in the -EBUSY return for a similar check.
So, make it consistent here by returning -EBUSY and using a
similar message in both scenarios.
Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20221006224212.569555-2-gpiccoli@igalia.com
This reverts commit e4f0a7ec58.
When using this new interface, both efi_pstore and ramoops
backends are unable to properly decompress dmesg if using
zstd, lz4 and lzo algorithms (and maybe more). It does succeed
with deflate though.
The message observed in the kernel log is:
[2.328828] pstore: crypto_acomp_decompress failed, ret = -22!
The pstore infrastructure is able to collect the dmesg with
both backends tested, but since decompression fails it's
unreadable. With this revert everything is back to normal.
Fixes: e4f0a7ec58 ("pstore: migrate to crypto acomp interface")
Cc: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220929215515.276486-1-gpiccoli@igalia.com
- Enable mirrored memory for arm64
- Fix up several abuses of the efivar API
- Refactor the efivar API in preparation for moving the 'business logic'
part of it into efivarfs
- Enable ACPI PRM on arm64
-----BEGIN PGP SIGNATURE-----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=zI0R
-----END PGP SIGNATURE-----
Merge tag 'efi-next-for-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI updates from Ard Biesheuvel:
- Enable mirrored memory for arm64
- Fix up several abuses of the efivar API
- Refactor the efivar API in preparation for moving the 'business
logic' part of it into efivarfs
- Enable ACPI PRM on arm64
* tag 'efi-next-for-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi: (24 commits)
ACPI: Move PRM config option under the main ACPI config
ACPI: Enable Platform Runtime Mechanism(PRM) support on ARM64
ACPI: PRM: Change handler_addr type to void pointer
efi: Simplify arch_efi_call_virt() macro
drivers: fix typo in firmware/efi/memmap.c
efi: vars: Drop __efivar_entry_iter() helper which is no longer used
efi: vars: Use locking version to iterate over efivars linked lists
efi: pstore: Omit efivars caching EFI varstore access layer
efi: vars: Add thin wrapper around EFI get/set variable interface
efi: vars: Don't drop lock in the middle of efivar_init()
pstore: Add priv field to pstore_record for backend specific use
Input: applespi - avoid efivars API and invoke EFI services directly
selftests/kexec: remove broken EFI_VARS secure boot fallback check
brcmfmac: Switch to appropriate helper to load EFI variable contents
iwlwifi: Switch to proper EFI variable store interface
media: atomisp_gmin_platform: stop abusing efivar API
efi: efibc: avoid efivar API for setting variables
efi: avoid efivars layer when loading SSDTs from variables
efi: Correct comment on efi_memmap_alloc
memblock: Disable mirror feature if kernelcore is not specified
...
The EFI pstore backend will need to store per-record variable name data
when we switch away from the efivars layer. Add a priv field to struct
pstore_record, and document it as holding a backend specific pointer
that is assumed to be a kmalloc()d buffer, and will be kfree()d when the
entire record is freed.
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
The crypto 'compress' interface is deprecated, so before adding new
features, migrate to the acomp interface. Note that we are only using
synchronous implementations of acomp, so we don't have to deal with
asynchronous completion.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
pstore_dump() is *always* invoked in atomic context (nowadays in an RCU
read-side critical section, before that under a spinlock).
It doesn't make sense to try to use semaphores here.
This is mostly a revert of commit ea84b580b9 ("pstore: Convert buf_lock
to semaphore"), except that two parts aren't restored back exactly as they
were:
- keep the lock initialization in pstore_register
- in efi_pstore_write(), always set the "block" flag to false
- omit "is_locked", that was unnecessary since
commit 959217c84c ("pstore: Actually give up during locking failure")
- fix the bailout message
The actual problem that the buggy commit was trying to address may have
been that the use of preemptible() in efi_pstore_write() was wrong - it
only looks at preempt_count() and the state of IRQs, but __rcu_read_lock()
doesn't touch either of those under CONFIG_PREEMPT_RCU.
(Sidenote: CONFIG_PREEMPT_RCU means that the scheduler can preempt tasks in
RCU read-side critical sections, but you're not allowed to actively
block/reschedule.)
Lockdep probably never caught the problem because it's very rare that you
actually hit the contended case, so lockdep always just sees the
down_trylock(), not the down_interruptible(), and so it can't tell that
there's a problem.
Fixes: ea84b580b9 ("pstore: Convert buf_lock to semaphore")
Cc: stable@vger.kernel.org
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220314185953.2068993-1-jannh@google.com
This patch:
- Moves `include/linux/zstd.h` -> `include/linux/zstd_lib.h`
- Updates modified zstd headers to yearless copyright
- Adds a new API in `include/linux/zstd.h` that is functionally
equivalent to the in-use subset of the current API. Functions are
renamed to avoid symbol collisions with zstd, to make it clear it is
not the upstream zstd API, and to follow the kernel style guide.
- Updates all callers to use the new API.
There are no functional changes in this patch. Since there are no
functional change, I felt it was okay to update all the callers in a
single patch. Once the API is approved, the callers are mechanically
changed.
This patch is preparing for the 3rd patch in this series, which updates
zstd to version 1.4.10. Since the upstream zstd API is no longer exposed
to callers, the update can happen transparently.
Signed-off-by: Nick Terrell <terrelln@fb.com>
Tested By: Paul Jones <paul@pauljones.id.au>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # LLVM/Clang v13.0.0 on x86-64
Tested-by: Jean-Denis Girard <jd.girard@sysnux.pf>
Rather than storing the iterator information in the registered
kmsg_dumper structure, create a separate iterator structure. The
kmsg_dump_iter structure can reside on the stack of the caller, thus
allowing lockless use of the kmsg_dump functions.
Update code that accesses the kernel logs using the kmsg_dumper
structure to use the new kmsg_dump_iter structure. For kmsg_dumpers,
this also means adding a call to kmsg_dump_rewind() to initialize
the iterator.
All this is in preparation for removal of @logbuf_lock.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Kees Cook <keescook@chromium.org> # pstore
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20210303101528.29901-13-john.ogness@linutronix.de
Both pstore_compress() and decompress_record() use a mistyped config
option name ("PSTORE_COMPRESSION" instead of "PSTORE_COMPRESS"). As
a result compression and decompression of pstore records was always
disabled.
Use the correct config option name.
Signed-off-by: Jiri Bohac <jbohac@suse.cz>
Fixes: fd49e03280 ("pstore: Fix linking when crypto API disabled")
Acked-by: Matteo Croce <mcroce@microsoft.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210218111547.johvp5klpv3xrpnn@dwarf.suse.cz
While kmsg_bytes can be set for pstore via mount, if a crash occurs
before the mount only partial console log will be stored as kmsg_bytes
defaults to a potentially different hardcoded value in the kernel
(PSTORE_DEFAULT_KMSG_BYTES). This makes it impossible to analyze valuable
post-mortem data especially on the embedded development or in the process
of bringing up new boards. Change this value to be a Kconfig option
with the default of old PSTORE_DEFAULT_KMSG_BYTES
Signed-off-by: Vasile-Laurentiu Stanimir <vasile-laurentiu.stanimir@windriver.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
When building a kernel with CONFIG_PSTORE=y and CONFIG_CRYPTO not set,
a build error happens:
ld: fs/pstore/platform.o: in function `pstore_dump':
platform.c:(.text+0x3f9): undefined reference to `crypto_comp_compress'
ld: fs/pstore/platform.o: in function `pstore_get_backend_records':
platform.c:(.text+0x784): undefined reference to `crypto_comp_decompress'
This because some pstore code uses crypto_comp_(de)compress regardless
of the CONFIG_CRYPTO status. Fix it by wrapping the (de)compress usage
by IS_ENABLED(CONFIG_PSTORE_COMPRESS)
Signed-off-by: Matteo Croce <mcroce@linux.microsoft.com>
Link: https://lore.kernel.org/lkml/20200706234045.9516-1-mcroce@linux.microsoft.com
Fixes: cb3bee0369 ("pstore: Use crypto compress API")
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Add a new member to struct pstore_info for passing information about
kmesg dump maximum reason. This allows a finer control of what kmesg
dumps are sent to pstore storage backends.
Those backends that do not explicitly set this field (keeping it equal to
0), get the default behavior: store only Oopses and Panics, or everything
if the printk.always_kmsg_dump boot param is set.
Signed-off-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Link: https://lore.kernel.org/lkml/20200515184434.8470-5-keescook@chromium.org/
Co-developed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
The pstore subsystem already had a private version of this function.
With the coming addition of the pstore/zone driver, this needs to be
shared. As it really should live with printk, move it there instead.
Link: https://lore.kernel.org/lkml/20200515184434.8470-4-keescook@chromium.org/
Acked-by: Petr Mladek <pmladek@suse.com>
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Reviewed-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
In order to more cleanly pass around backend names, make the "name" member
const. This means the module param needs to be dynamic (technically, it
was before, so this actually cleans up a minor memory leak if a backend
was specified and then gets unloaded.)
Link: https://lore.kernel.org/lkml/20200510202436.63222-3-keescook@chromium.org/
Signed-off-by: Kees Cook <keescook@chromium.org>
The CON_ENABLED flag gets cleared during unregister_console(), so make
sure we already reset the console flags before calling register_console(),
otherwise unloading and reloading a pstore backend will not restart
console logging.
Signed-off-by: Kees Cook <keescook@chromium.org>
If a backend was unloaded without having first removed all its
associated records in pstorefs, subsequent removals would crash while
attempting to call into the now missing backend. Add automatic removal
from the tree in pstore_unregister(), so that no references to the
backend remain.
Reported-by: Luis Henriques <lhenriques@suse.com>
Link: https://lore.kernel.org/lkml/87o8yrmv69.fsf@suse.com
Link: https://lore.kernel.org/lkml/20200506152114.50375-11-keescook@chromium.org/
Signed-off-by: Kees Cook <keescook@chromium.org>
The pstore.update_ms value was being disabled during pstore_unregister(),
which would cause any prior value to go unnoticed on the next
pstore_register(). Instead, just let del_timer() stop the timer, which
was always sufficient. This additionally refactors the timer reset code
and allows the timer to be enabled if the module parameter is changed
away from the default.
Link: https://lore.kernel.org/lkml/20200506152114.50375-10-keescook@chromium.org/
Signed-off-by: Kees Cook <keescook@chromium.org>
Nothing was protecting changes to the pstorefs superblock. Add locking
and refactor away is_pstore_mounted(), instead using a helper to add a
way to safely lock the pstorefs root inode during filesystem changes.
Link: https://lore.kernel.org/lkml/20200506152114.50375-9-keescook@chromium.org/
Signed-off-by: Kees Cook <keescook@chromium.org>
Currently pstore can only have a single backend attached at a time, and it
tracks the active backend via "psinfo", under a lock. The locking for this
does not need to be a spinlock, and in order to avoid may_sleep() issues
during future changes to pstore_unregister(), switch to a mutex instead.
Link: https://lore.kernel.org/lkml/20200506152114.50375-4-keescook@chromium.org/
Signed-off-by: Kees Cook <keescook@chromium.org>
There is no reason to be doing a module get/put in pstore_register(),
since the module calling pstore_register() cannot be unloaded since it
hasn't finished its initialization. Remove it so there is no confusion
about how registration ordering works.
Link: https://lore.kernel.org/lkml/20200506152114.50375-2-keescook@chromium.org/
Signed-off-by: Kees Cook <keescook@chromium.org>
There is a potential mem leak when pstore_init_fs failed,
since the pstore compression maybe unlikey to initialized
successfully. We must clean up the allocation once this
unlikey issue happens.
Signed-off-by: chenqiwu <chenqiwu@xiaomi.com>
Link: https://lore.kernel.org/r/1581068800-13817-1-git-send-email-qiwuchen55@gmail.com
Signed-off-by: Kees Cook <keescook@chromium.org>
The pstore_choose_compression() function is not exported so make it
static to avoid the following sparse warning:
fs/pstore/platform.c:796:13: warning: symbol 'pstore_choose_compression' was not declared. Should it be static?
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Link: https://lore.kernel.org/r/20191016123317.3154-1-ben.dooks@codethink.co.uk
Fixes: cb095afd44 ("pstore: Centralize init/exit routines")
Signed-off-by: Kees Cook <keescook@chromium.org>
Another round of SPDX header file fixes for 5.2-rc4
These are all more "GPL-2.0-or-later" or "GPL-2.0-only" tags being
added, based on the text in the files. We are slowly chipping away at
the 700+ different ways people tried to write the license text. All of
these were reviewed on the spdx mailing list by a number of different
people.
We now have over 60% of the kernel files covered with SPDX tags:
$ ./scripts/spdxcheck.py -v 2>&1 | grep Files
Files checked: 64533
Files with SPDX: 40392
Files with errors: 0
I think the majority of the "easy" fixups are now done, it's now the
start of the longer-tail of crazy variants to wade through.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXPuGTg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykBvQCg2SG+HmDH+tlwKLT/q7jZcLMPQigAoMpt9Uuy
sxVEiFZo8ZU9v1IoRb1I
=qU++
-----END PGP SIGNATURE-----
Merge tag 'spdx-5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull yet more SPDX updates from Greg KH:
"Another round of SPDX header file fixes for 5.2-rc4
These are all more "GPL-2.0-or-later" or "GPL-2.0-only" tags being
added, based on the text in the files. We are slowly chipping away at
the 700+ different ways people tried to write the license text. All of
these were reviewed on the spdx mailing list by a number of different
people.
We now have over 60% of the kernel files covered with SPDX tags:
$ ./scripts/spdxcheck.py -v 2>&1 | grep Files
Files checked: 64533
Files with SPDX: 40392
Files with errors: 0
I think the majority of the "easy" fixups are now done, it's now the
start of the longer-tail of crazy variants to wade through"
* tag 'spdx-5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (159 commits)
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 450
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 449
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 448
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 446
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 445
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 444
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 443
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 442
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 441
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 440
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 438
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 437
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 436
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 435
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 434
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 433
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 432
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 431
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 430
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 429
...
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation this program is
distributed in the hope that it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details you should have received a copy of the gnu general
public license along with this program if not write to the free
software foundation inc 59 temple place suite 330 boston ma 02111
1307 usa
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 136 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190530000436.384967451@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The ram pstore backend has always had the crash dumper frontend enabled
unconditionally. However, it was possible to effectively disable it
by setting a record_size=0. All the machinery would run (storing dumps
to the temporary crash buffer), but 0 bytes would ultimately get stored
due to there being no przs allocated for dumps. Commit 89d328f637
("pstore/ram: Correctly calculate usable PRZ bytes"), however, assumed
that there would always be at least one allocated dprz for calculating
the size of the temporary crash buffer. This was, of course, not the
case when record_size=0, and would lead to a NULL deref trying to find
the dprz buffer size:
BUG: unable to handle kernel NULL pointer dereference at (null)
...
IP: ramoops_probe+0x285/0x37e (fs/pstore/ram.c:808)
cxt->pstore.bufsize = cxt->dprzs[0]->buffer_size;
Instead, we need to only enable the frontends based on the success of the
prz initialization and only take the needed actions when those zones are
available. (This also fixes a possible error in detecting if the ftrace
frontend should be enabled.)
Reported-and-tested-by: Yaro Slav <yaro330@gmail.com>
Fixes: 89d328f637 ("pstore/ram: Correctly calculate usable PRZ bytes")
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Set tfm to NULL on free_buf_for_compression() after crypto_free_comp().
This avoid a use-after-free when allocate_buf_for_compression()
and free_buf_for_compression() are called twice. Although
free_buf_for_compression() freed the tfm, allocate_buf_for_compression()
won't reinitialize the tfm since the tfm pointer is not NULL.
Fixes: 95047b0519 ("pstore: Refactor compression initialization")
Signed-off-by: Pi-Hsun Shih <pihsun@chromium.org>
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Sometimes pstore_console_write() will write records with zero size
to persistent ram zone, which is unnecessary. It will only increase
resource consumption. Also adjust ramoops_write_kmsg_hdr() to have
same logic if memory allocation fails.
Signed-off-by: Yue Hu <huyue2@yulong.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Instead of running with interrupts disabled, use a semaphore. This should
make it easier for backends that may need to sleep (e.g. EFI) when
performing a write:
|BUG: sleeping function called from invalid context at kernel/sched/completion.c:99
|in_atomic(): 1, irqs_disabled(): 1, pid: 2236, name: sig-xstate-bum
|Preemption disabled at:
|[<ffffffff99d60512>] pstore_dump+0x72/0x330
|CPU: 26 PID: 2236 Comm: sig-xstate-bum Tainted: G D 4.20.0-rc3 #45
|Call Trace:
| dump_stack+0x4f/0x6a
| ___might_sleep.cold.91+0xd3/0xe4
| __might_sleep+0x50/0x90
| wait_for_completion+0x32/0x130
| virt_efi_query_variable_info+0x14e/0x160
| efi_query_variable_store+0x51/0x1a0
| efivar_entry_set_safe+0xa3/0x1b0
| efi_pstore_write+0x109/0x140
| pstore_dump+0x11c/0x330
| kmsg_dump+0xa4/0xd0
| oops_exit+0x22/0x30
...
Reported-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Fixes: 21b3ddd39f ("efi: Don't use spinlocks for efi vars")
Signed-off-by: Kees Cook <keescook@chromium.org>
In later patches we will need to map types to names, so create a
constant table for that which can also be used in different parts of
old and new code. This saves the type in the PRZ which will be useful
in later patches.
Instead of having an explicit PSTORE_TYPE_UNKNOWN, just use ..._MAX.
This includes removing the now redundant filename templates which can use
a single format string. Also, there's no reason to limit the "is it still
compressed?" test to only PSTORE_TYPE_DMESG when building the pstorefs
filename. Records are zero-initialized, so a backend would need to have
explicitly set compressed=1.
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Co-developed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
This improves and updates some comments:
- dump handler comment out of sync from calling convention
- fix kern-doc typo
and improves status output:
- reminder that only kernel crash dumps are compressed
- do not be silent about ECC infrastructure failures
Signed-off-by: Kees Cook <keescook@chromium.org>
Since the console writer does not use the preallocated crash dump buffer
any more, there is no reason to perform locking around it.
Fixes: 70ad35db33 ("pstore: Convert console write to use ->write_buf")
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
The pre-allocated compression buffer used for crash dumping was also
being used for decompression. This isn't technically safe, since it's
possible the kernel may attempt a crashdump while pstore is populating the
pstore filesystem (and performing decompression). Instead, just allocate
a separate buffer for decompression. Correctness is preferred over
performance here.
Signed-off-by: Kees Cook <keescook@chromium.org>
This refactors compression initialization slightly to better handle
getting potentially called twice (via early pstore_register() calls
and later pstore_init()) and improves the comments and reporting to be
more verbose.
Signed-off-by: Kees Cook <keescook@chromium.org>
Tested-by: Guenter Roeck <groeck@chromium.org>
ramoops's call of pstore_register() was recently moved to run during
late_initcall() because the crypto backend may not have been ready during
postcore_initcall(). This meant early-boot crash dumps were not getting
caught by pstore any more.
Instead, lets allow calls to pstore_register() earlier, and once crypto
is ready we can initialize the compression.
Reported-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Tested-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Fixes: cb3bee0369 ("pstore: Use crypto compress API")
[kees: trivial rebase]
Signed-off-by: Kees Cook <keescook@chromium.org>
Tested-by: Guenter Roeck <groeck@chromium.org>
In preparation for having additional actions during init/exit, this moves
the init/exit into platform.c, centralizing the logic to make call outs
to the fs init/exit.
Signed-off-by: Kees Cook <keescook@chromium.org>
Tested-by: Guenter Roeck <groeck@chromium.org>
This patch added the 6th compression algorithm support for pstore: zstd.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
This prepares pstore for converting the VFS layer to timespec64.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Jiasheng Jiang