Commit graph

399 commits

Author SHA1 Message Date
Daniel Lezcano
04c8984ae3 devfreq: use HZ macros
HZ unit conversion macros are available in units.h, use them and remove
the duplicate definition.

The new macro has an unsigned long type.

All the code is dealing with unsigned long and the code using the macro is
doing a coercitive cast to unsigned long.

Link: https://lkml.kernel.org/r/20210816114732.1834145-5-daniel.lezcano@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Christian Eggers <ceggers@arri.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Lukasz Luba <lukasz.luba@arm.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: MyungJoo Ham <myungjoo.ham@samsung.com>
Cc: Peter Meerwald <pmeerw@pmeerw.net>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 11:50:26 -07:00
Chanwoo Choi
8c37d01e1a PM / devfreq: passive: Fix get_target_freq when not using required-opp
The 86ad9a24f2 ("PM / devfreq: Add required OPPs support to passive governor")
supported the required-opp property for using devfreq passive governor.
But, 86ad9a24f2 has caused the problem on use-case when required-opp
is not used such as exynos-bus.c devfreq driver. So that fix the
get_target_freq of passive governor for supporting the case of when
required-opp is not used.

Fixes: 86ad9a24f2 ("PM / devfreq: Add required OPPs support to passive governor")
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2021-06-24 10:37:35 +09:00
YueHaibing
1ad4f329fc PM / devfreq: userspace: Use DEVICE_ATTR_RW macro
Use DEVICE_ATTR_RW helper instead of plain DEVICE_ATTR,
which makes the code a bit shorter and easier to read.

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2021-06-17 17:08:46 +09:00
Dong Aisheng
a15fc9aa5b PM / devfreq: imx8m-ddrc: Remove DEVFREQ_GOV_SIMPLE_ONDEMAND dependency
The driver can't support simple ondemand governor due to missing
.get_dev_status() capability.

Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2021-05-21 13:16:21 +09:00
Dmitry Osipenko
5e480ab94d PM / devfreq: tegra30: Support thermal cooling
Expose ACTMON devfreq device as a cooling device in order to throttle
memory freq on overheat. Throttling of memory freq has a significant
cooling effect on NVIDIA Tegra SoCs since higher memory freqs require
higher SoC core voltage which is one of the main causes of the heating.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2021-05-21 13:16:10 +09:00
Dong Aisheng
7dbc0d2468 PM / devfreq: imx-bus: Remove imx_bus_get_dev_status
Current driver actually does not support simple ondemand governor
as it's unable to provide device load information. So removing
the unnecessary callback to avoid confusing.
Right now the driver is using userspace governor by default.

polling_ms was also dropped as it's not needed for non-ondemand
governor.

Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2021-05-21 13:16:10 +09:00
YueHaibing
18b380ed61 PM / devfreq: Add missing error code in devfreq_add_device()
Set err code in the error path before jumping to the end of the function.

Fixes: 4dc3bab868 ("PM / devfreq: Add support delayed timer for polling mode")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2021-05-20 12:16:41 +09:00
Fabio Estevam
0a7dc8318c PM / devfreq: imx8m-ddrc: Remove unneeded of_match_ptr()
i.MX is a DT-only platform, so of_match_ptr() can be safely
removed.

Remove the unneeded of_match_ptr().

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2021-04-08 13:14:51 +09:00
Fabio Estevam
ca948312e0 PM / devfreq: imx-bus: Remove unneeded of_match_ptr()
i.MX is a DT-only platform, so of_match_ptr() can be safely
removed.

Remove the unneeded of_match_ptr().

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2021-04-08 13:14:51 +09:00
Dong Aisheng
6c4b264c70 PM / devfreq: imx8m-ddrc: Remove imx8m_ddrc_get_dev_status
Current driver actually does not support simple ondemand governor
as it's unable to provide device load information. So removing
the unnecessary callback to avoid confusing.
Right now the driver is using userspace governor by default.

polling_ms was also dropped as it's not needed for non-ondemand
governor.

Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2021-04-08 13:14:51 +09:00
Dong Aisheng
05f15314f0 PM / devfreq: Remove the invalid description for get_target_freq
First of all, no_central_polling was removed since
commit 7e6fdd4bad ("PM / devfreq: Core updates to support devices
which can idle")
Secondly, get_target_freq() is not only called only with update_devfreq()
notified by OPP now, but also min/max freq qos notifier.

So remove this invalid description now to avoid confusing.

Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2021-04-08 13:14:51 +09:00
Dong Aisheng
b19e13463a PM / devfreq: Check get_dev_status in devfreq_update_stats
Check .get_dev_status() in devfreq_update_stats in case it's abused
when a device does not provide it.

Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2021-04-08 13:14:51 +09:00
Dong Aisheng
5f104f9fc1 PM / devfreq: Fix the wrong set_freq path for userspace governor in Kconfig
Fix the wrong set_freq path for userspace governor in Kconfig.

Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2021-04-08 13:14:50 +09:00
Krzysztof Kozlowski
fbf821ec63 PM / devfreq: rk3399_dmc: Simplify with dev_err_probe()
Common pattern of handling deferred probe can be simplified with
dev_err_probe().  Less code and the error value gets printed.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2021-04-08 13:14:50 +09:00
Dong Aisheng
62453f1ba5 PM / devfreq: Use more accurate returned new_freq as resume_freq
Use the more accurate returned new_freq as resume_freq.
It's the same as how devfreq->previous_freq was updated.

Fixes: 83f8ca45af ("PM / devfreq: add support for suspend/resume of a devfreq device")
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2021-04-08 13:14:45 +09:00
Lukasz Luba
8b50a79957 PM / devfreq: Unlock mutex and free devfreq struct in error path
The devfreq->lock is held for time of setup. Release the lock in the
error path, before jumping to the end of the function.

Change the goto destination which frees the allocated memory.

Cc: v5.9+ <stable@vger.kernel.org> # v5.9+
Fixes: 4dc3bab868 ("PM / devfreq: Add support delayed timer for polling mode")
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2021-04-08 13:14:45 +09:00
Daniel Lezcano
1224451bb6 PM / devfreq: Register devfreq as a cooling device on demand
Currently the default behavior is to manually having the devfreq
backend to register themselves as a devfreq cooling device.

Instead of adding the code in the drivers for the thermal cooling
device registering, let's provide a flag in the devfreq's profile to
tell the common devfreq code to register the newly created devfreq as
a cooling device.

Suggested-by: Chanwoo Choi <cwchoi00@gmail.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2021-03-09 15:40:16 +09:00
Rafael J. Wysocki
332fd9005b Merge branches 'pm-devfreq' and 'pm-tools'
* pm-devfreq:
  PM / devfreq: rk3399_dmc: Remove unneeded semicolon
  PM / devfreq: Replace devfreq->dev.parent as dev in devfreq_add_device
  PM / devfreq: Correct spelling in a comment

* pm-tools:
  cpupower: Add cpuid cap flag for MSR_AMD_HWCR support
  cpupower: Remove family arg to decode_pstates()
  cpupower: Condense pstate enabled bit checks in decode_pstates()
  cpupower: Update family checks when decoding HW pstates
  cpupower: Remove unused pscur variable.
  cpupower: Add CPUPOWER_CAP_AMD_HW_PSTATE cpuid caps flag
  cpupower: Correct macro name for CPB caps flag
  cpupower: Update msr_pstate union struct naming
  cpupower: add Makefile dependencies for install targets
2021-02-15 17:02:04 +01:00
Saravana Kannan
86ad9a24f2 PM / devfreq: Add required OPPs support to passive governor
Look at the required OPPs of the "parent" device to determine the OPP that
is required from the slave device managed by the passive governor. This
allows having mappings between a parent device and a slave device even when
they don't have the same number of OPPs.

While at it do a minor spell-fix and remove out label.

Signed-off-by: Saravana Kannan <saravanak@google.com>
Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
[ Viresh: Rearranged code and clean error paths ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2021-02-04 16:48:16 +05:30
Saravana Kannan
26f9c7cc42 PM / devfreq: Cache OPP table reference in devfreq
The OPP table can be used often in devfreq. Trying to get it each time can
be expensive, so cache it in the devfreq struct.

Signed-off-by: Saravana Kannan <saravanak@google.com>
Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
[ Viresh: Added a blank line ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2021-02-04 16:36:28 +05:30
Yang Li
fc1745c0e4 PM / devfreq: rk3399_dmc: Remove unneeded semicolon
Eliminate the following coccicheck warning:
./drivers/devfreq/rk3399_dmc.c:403:2-3: Unneeded semicolon

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2021-02-02 16:17:27 +09:00
Viresh Kumar
c7f142190d devfreq: tegra30: Migrate to dev_pm_opp_set_opp()
dev_pm_opp_set_bw() is getting removed and dev_pm_opp_set_opp() should
be used instead. Migrate to the new API.

We don't want the OPP core to manage the clk for this driver, migrate to
dev_pm_opp_of_add_table_noclk() to make sure dev_pm_opp_set_opp()
doesn't have any side effects.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
2021-02-02 10:30:53 +05:30
pierre Kuo
ec894883de PM / devfreq: Replace devfreq->dev.parent as dev in devfreq_add_device
In devfreq_add_device, replace devfreq->dev.parent
as dev to keep code simple.

Signed-off-by: pierre Kuo <vichy.kuo@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2021-01-05 10:05:41 +09:00
Lukasz Luba
f40d81231b PM / devfreq: Correct spelling in a comment
The device attribute exposed in sysfs is called 'polling_interval'. Align
the comment.

Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2021-01-05 10:04:25 +09:00
Rafael J. Wysocki
b3fac81783 Merge branches 'pm-devfreq' and 'pm-tools'
* pm-devfreq:
  PM / devfreq: tegra30: Separate configurations per-SoC generation
  PM / devfreq: tegra30: Support interconnect and OPPs from device-tree
  PM / devfreq: tegra20: Deprecate in a favor of emc-stat based driver
  PM / devfreq: exynos-bus: Add registration of interconnect child device
  dt-bindings: devfreq: Add documentation for the interconnect properties
  soc/tegra: fuse: Add stub for tegra_sku_info
  soc/tegra: fuse: Export tegra_read_ram_code()
  clk: tegra: Export Tegra20 EMC kernel symbols
  PM / devfreq: tegra30: Silence deferred probe error
  PM / devfreq: tegra20: Relax Kconfig dependency
  PM / devfreq: tegra20: Silence deferred probe error
  PM / devfreq: Remove redundant governor_name from struct devfreq
  PM / devfreq: Add governor attribute flag for specifc sysfs nodes
  PM / devfreq: Add governor feature flag
  PM / devfreq: Add tracepoint for frequency changes
  PM / devfreq: Unify frequency change to devfreq_update_target func
  trace: events: devfreq: Use fixed indentation size to improve readability

* pm-tools:
  pm-graph v5.8
  cpupower: Provide online and offline CPU information
2020-12-15 15:27:16 +01:00
Viresh Kumar
8145687283 PM / devfreq: exynos: dev_pm_opp_put_*() accepts NULL argument
The dev_pm_opp_put_*() APIs now accepts a NULL opp_table pointer and so
there is no need for us to carry the extra check. Drop them.

Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2020-12-09 11:21:12 +05:30
Dmitry Osipenko
6a575e84f1 PM / devfreq: tegra30: Separate configurations per-SoC generation
Previously we were using count-weight of the T124 for T30 in order to
get EMC clock rate that was reasonable for T30. In fact the count-weight
should be x2 times smaller on T30, but then devfreq was producing a bit
too low EMC clock rate for ISO memory clients, like display controller
for example.

Now both Tegra ACTMON and Tegra DRM display drivers support interconnect
framework and display driver tells to ICC what a minimum memory bandwidth
is needed, preventing FIFO underflows. Thus, now we can use a proper
count-weight value for Tegra30 and MC_ALL device config needs a bit more
aggressive boosting.

Add a separate ACTMON driver configuration that is specific to Tegra30.

Tested-by: Peter Geis <pgwipeout@gmail.com>
Tested-by: Nicolas Chauvet <kwizart@gmail.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-12-07 10:25:51 +09:00
Dmitry Osipenko
16e8b2a7cb PM / devfreq: tegra30: Support interconnect and OPPs from device-tree
This patch moves ACTMON driver away from generating OPP table by itself,
transitioning it to use the table which comes from device-tree. This
change breaks compatibility with older device-trees and brings support
for the interconnect framework to the driver. This is a mandatory change
which needs to be done in order to implement interconnect-based memory
DVFS, i.e. device-trees need to be updated. Now ACTMON issues a memory
bandwidth requests using dev_pm_opp_set_bw() instead of driving EMC clock
rate directly.

Tested-by: Peter Geis <pgwipeout@gmail.com>
Tested-by: Nicolas Chauvet <kwizart@gmail.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-12-07 10:25:51 +09:00
Dmitry Osipenko
98fd9972ed PM / devfreq: tegra20: Deprecate in a favor of emc-stat based driver
Remove tegra20-devfreq in order to replace it with a EMC_STAT based
devfreq driver. Previously we were going to use MC_STAT based
tegra20-devfreq driver because EMC_STAT wasn't working properly, but
now that problem is resolved. This resolves complications imposed by
the removed driver since it was depending on both EMC and MC drivers
simultaneously.

Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-11-23 16:01:13 +09:00
Sylwester Nawrocki
404d59c57b PM / devfreq: exynos-bus: Add registration of interconnect child device
This patch adds registration of a child platform device for the exynos
interconnect driver. It is assumed that the interconnect provider will
only be needed when #interconnect-cells property is present in the bus
DT node, hence the child device will be created only when such a property
is present.

Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-11-13 18:10:42 +09:00
Dmitry Osipenko
09d56d92ad PM / devfreq: tegra30: Silence deferred probe error
Tegra EMC driver was turned into a regular kernel driver, meaning that it
could be compiled as a loadable kernel module now. Hence EMC clock isn't
guaranteed to be available and clk_get("emc") may return -EPROBE_DEFER.
Let's silence the deferred probe error.

Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-10-26 12:16:05 +09:00
Dmitry Osipenko
cc2a4e8361 PM / devfreq: tegra20: Relax Kconfig dependency
The Tegra EMC driver now could be compiled as a loadable kernel module.
Currently devfreq driver depends on the EMC/MC drivers in Kconfig, and
thus, devfreq is forced to be a kernel module if EMC is compiled as a
module. This build dependency could be relaxed since devfreq driver
checks MC/EMC presence on probe, allowing kernel configuration where
devfreq is a built-in driver and EMC driver is a loadable module.
This change puts Tegra20 devfreq Kconfig entry on a par with the Tegra30
devfreq entry.

Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-10-26 12:15:43 +09:00
Dmitry Osipenko
9a93386bf6 PM / devfreq: tegra20: Silence deferred probe error
Tegra EMC driver was turned into a regular kernel driver, meaning that it
could be compiled as a loadable kernel module now. Hence EMC clock isn't
guaranteed to be available and clk_get("emc") may return -EPROBE_DEFER.
Let's silence the deferred probe error.

Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-10-26 12:15:43 +09:00
Chanwoo Choi
96ffcdf239 PM / devfreq: Remove redundant governor_name from struct devfreq
The devfreq structure instance contains the governor_name and a governor
instance. When need to show the governor name, better to use the name
of devfreq_governor structure. So, governor_name variable in struct devfreq
is a redundant and unneeded variable. Remove the redundant governor_name
of struct devfreq and then use the name of devfreq_governor instance.

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-10-26 11:50:51 +09:00
Chanwoo Choi
5f1a9066fc PM / devfreq: Add governor attribute flag for specifc sysfs nodes
DEVFREQ supports the default governors like performance, simple_ondemand and
also allows the devfreq driver to add their own governor like tegra30-devfreq.c
according to their requirement. In result, some sysfs attributes are useful
or not useful. Prior to that the user can access all sysfs attributes
regardless of the available attributes.

So, clarify the access permission of sysfs attributes according to governor.
When adding the devfreq governor, can specify the available attribute
information by using DEVFREQ_GOV_ATTR_* constant variable. The user can
read or write the sysfs attributes in accordance to the specified attributes.

When adding the governor, can add the following attributes
according to the governor feature.

[Definition for speific sysfs attributes]
- DEVFREQ_GOV_ATTR_POLLING_INTERVAL to update polling interval for timer.
  : /sys/class/devfreq/[devfreq dev name]/polling_interval
- DEVFREQ_GOV_ATTR_TIMER to change the type of timer on either deferrable
  or dealyed timer.
  : /sys/class/devfreq/[devfreq dev name]/timer

And all devfreq governors have to support the following common attributes.
The common attributes are added to devfreq class by default.
- governor
- available_governors
- available_frequencies
- cur_freq
- target_freq
- min_freq
- max_freq
- trans_stat

[Table of governor attribute flags for devfreq governors]
------------------------------------------------------------------------------
                      | simple    | perfor | power | user | passive | tegra30
		      | ondemand  | mance  | save  | space|         |
------------------------------------------------------------------------------
governor              | O         | O      | O     | O    | O       | O
available_governors   | O         | O      | O     | O    | O       | O
available_frequencies | O         | O      | O     | O    | O       | O
cur_freq              | O         | O      | O     | O    | O       | O
target_freq           | O         | O      | O     | O    | O       | O
min_freq              | O         | O      | O     | O    | O       | O
max_freq              | O         | O      | O     | O    | O       | O
trans_stat            | O         | O      | O     | O    | O       | O
                      --------------------------------------------------------
polling_interval      | O         | X      | X     | X    | X       | O
timer                 | O         | X      | X     | X    | X       | X
------------------------------------------------------------------------------

Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-10-26 11:46:54 +09:00
Chanwoo Choi
0dd25a0d12 PM / devfreq: Add governor feature flag
The devfreq governor is able to have the specific flag as follows
in order to implement the specific feature. For example, devfreq allows
user to change the governors on runtime via sysfs interface.
But, if devfreq device uses 'passive' governor, don't allow user to change
the governor. For this case, define the DEVFREQ_GOV_FLAG_IMMUTABLE
and set it to flag of passive governor.

[Definition for governor flag]
- DEVFREQ_GOV_FLAG_IMMUTABLE
  : If immutable flag is set, governor is never changeable to other governors.
- DEVFREQ_GOV_FLAG_IRQ_DRIVEN
  : Devfreq core won't schedule polling work for this governor if value is set.

[Table of governor flag for devfreq governors]
------------------------------------------------------------------------------
                      | simple    | perfor | power | user | passive | tegra30
		      | ondemand  | mance  | save  | space|         |
------------------------------------------------------------------------------
immutable             | X         | X      | X     | X    | O       | O
interrupt_driven      | X(polling)| X      | X     | X    | X       | O (irq)
------------------------------------------------------------------------------

Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-10-26 10:54:41 +09:00
Matthias Kaehlcke
cab477d0d4 PM / devfreq: Add tracepoint for frequency changes
Add a tracepoint for frequency changes of devfreq devices and
use it.

Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
[cw00.choi: Move print position of tracepoint and add more information]
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-10-26 10:52:37 +09:00
Chanwoo Choi
b4365423bb PM / devfreq: Unify frequency change to devfreq_update_target func
The update_devfreq() and update_passive_devfreq() have the duplicate
code when changing the target frequency on final stage. So, unify
frequency change code to devfreq_update_target() to remove the
duplicate code and to centralize the frequency change code.

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-10-26 10:52:37 +09:00
Dmitry Osipenko
d353d1202b PM / devfreq: tegra30: Improve initial hardware resetting
It's safe to enable the ACTMON clock at any time during driver probing,
even if we don't know the state of hardware, because it's used only for
collecting and processing stats, and interrupt is kept disabled. This
allows us to slightly improve code which performs initial hardware
resetting by making use of a single reset_control_reset() instead of
assert/deassert pair. Secondly, a potential error of the reset-control
API is handled nicely now.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-09-29 17:50:10 +09:00
Chanwoo Choi
02bdbf7d09 PM / devfreq: event: Change prototype of devfreq_event_get_edev_by_phandle function
Previously, devfreq core support 'devfreq-events' property in order to get
the devfreq-event device by phandle. But, 'devfreq-events' property name is
not proper on devicetree binding because this name doesn't mean
the any h/w attribute.

The devfreq-event core hand over the rights to decide the property name
for getting the devfreq-event device on devicetree. Each devfreq-event driver
will decide the property name on devicetree binding and then pass
the their own property name to devfreq_event_get_edev_by_phandle function.

And change the prototype of devfreq_event_get_edev_count function
because of used deprecated 'devfreq-events' property.

Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-09-29 17:50:10 +09:00
Chanwoo Choi
86d90fd95b PM / devfreq: Change prototype of devfreq_get_devfreq_by_phandle function
Previously, devfreq core support 'devfreq' property in order to get
the devfreq device by phandle. But, 'devfreq' property name is not proper
on devicetree binding because this name doesn't mean the any h/w attribute.

The devfreq core hand over the right to decide the property name
for getting the devfreq device on devicetree. Each devfreq driver
will decide the property name on devicetree binding and pass
the their own property name to devfreq_get_devfreq_by_phandle function.

Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-09-29 17:50:10 +09:00
Leonard Crestez
7b38b7b042 PM / devfreq: Add devfreq_get_devfreq_by_node function
Split off part of devfreq_get_devfreq_by_phandle into a separate
function. This allows callers to fetch devfreq instances by enumerating
devicetree instead of explicit phandles.

Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
[cw00.choi: Export devfreq_get_devfreq_by_node function and
 add function to devfreq.h when CONFIG_PM_DEVFREQ is enabled.]
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-09-29 17:50:09 +09:00
Dan Carpenter
6bf560766a PM / devfreq: tegra30: Disable clock on error in probe
This error path needs to call clk_disable_unprepare().

Fixes: 7296443b90 ("PM / devfreq: tegra30: Handle possible round-rate error")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-09-23 13:35:58 +09:00
Chanwoo Choi
0c309ed17c PM / devfreq: Add timer type to devfreq_summary debugfs
The commit 4dc3bab868 ("PM / devfreq: Add support delayed timer for
polling mode") supports the delayed timer but this commit missed
the adding the timer type to devfreq_summary debugfs node.
Add the timer type to devfreq_summary debugfs.

Fixes: 4dc3bab868 ("PM / devfreq: Add support delayed timer for polling mode")
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-09-23 13:35:58 +09:00
Chanwoo Choi
27a6971445 PM / devfreq: Fix the wrong end with semicolon
Fix the wrong grammar at the end of code line by using semicolon.

Cc: stable vger.kernel.org
Fixes: 490a421bc5 ("PM / devfreq: Add debugfs support with devfreq_summary file")
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-07-30 17:22:58 +09:00
Chanwoo Choi
0aae11bcde PM / devfreq: Fix indentaion of devfreq_summary debugfs node
The commit 66d0e797bf ("Revert "PM / devfreq: Modify the device name
as devfreq(X) for sysfs"") roll back the device name from 'devfreqX'
to device name explained in DT. After applied commit 66d0e797bf,
the indentation of devfreq_summary debugfs node was broken.

So, fix indentaion of devfreq_summary debugfs node as following:

For example on Exynos5422-based Odroid-XU3 board,
$ cat /sys/kernel/debug/devfreq/devfreq_summary
dev                            parent_dev                     governor        polling_ms  cur_freq_Hz  min_freq_Hz  max_freq_Hz
------------------------------ ------------------------------ --------------- ---------- ------------ ------------ ------------
10c20000.memory-controller     null                           simple_ondemand          0    413000000    165000000    825000000
soc:bus_wcore                  null                           simple_ondemand         50     88700000     88700000    532000000
soc:bus_noc                    soc:bus_wcore                  passive                  0     66600000     66600000    111000000
soc:bus_fsys_apb               soc:bus_wcore                  passive                  0    111000000    111000000    222000000
soc:bus_fsys                   soc:bus_wcore                  passive                  0     75000000     75000000    200000000
soc:bus_fsys2                  soc:bus_wcore                  passive                  0     75000000     75000000    200000000
soc:bus_mfc                    soc:bus_wcore                  passive                  0     83250000     83250000    333000000
soc:bus_gen                    soc:bus_wcore                  passive                  0     88700000     88700000    266000000
soc:bus_peri                   soc:bus_wcore                  passive                  0     66600000     66600000     66600000
soc:bus_g2d                    soc:bus_wcore                  passive                  0     83250000     83250000    333000000
soc:bus_g2d_acp                soc:bus_wcore                  passive                  0            0     66500000    266000000
soc:bus_jpeg                   soc:bus_wcore                  passive                  0            0     75000000    300000000
soc:bus_jpeg_apb               soc:bus_wcore                  passive                  0            0     83250000    166500000
soc:bus_disp1_fimd             soc:bus_wcore                  passive                  0            0    120000000    200000000
soc:bus_disp1                  soc:bus_wcore                  passive                  0            0    120000000    300000000
soc:bus_gscl_scaler            soc:bus_wcore                  passive                  0            0    150000000    300000000
soc:bus_mscl                   soc:bus_wcore                  passive                  0            0     84000000    666000000

Cc: stable@vger.kernel.org
Fixes: 66d0e797bf ("Revert "PM / devfreq: Modify the device name as devfreq(X) for sysfs"")
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-07-30 17:22:58 +09:00
Chanwoo Choi
483d557ee9 PM / devfreq: Clean up the devfreq instance name in sysfs attr
The sysfs attr interface used eithere 'df' or 'devfreq' for devfreq instance
name. In order to keep the consistency and to improve the readabilty,
unify the instance name as 'df'. Add add the missing conditional statement
to prevent the fault.

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-07-30 17:22:57 +09:00
Chanwoo Choi
4dc3bab868 PM / devfreq: Add support delayed timer for polling mode
Until now, the devfreq driver using polling mode like simple_ondemand
governor have used only deferrable timer for reducing the redundant
power consumption. It reduces the CPU wake-up from idle due to polling mode
which check the status of Non-CPU device.

But, it has a problem for Non-CPU device like DMC device with DMA operation.
Some Non-CPU device need to do monitor continuously regardless of CPU state
in order to decide the proper next status of Non-CPU device.

So, add support the delayed timer for polling mode to support
the repetitive monitoring. The devfreq driver and user can select
the kind of timer on either deferrable and delayed timer.

For example, change the timer type of DMC device
based on Exynos5422-based Odroid-XU3 as following:

- If want to use deferrable timer as following:
echo deferrable > /sys/class/devfreq/10c20000.memory-controller/timer

- If want to use delayed timer as following:
echo delayed > /sys/class/devfreq/10c20000.memory-controller/timer

Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-07-30 17:22:57 +09:00
Kieran Bingham
ada795966a PM / devfreq: event: Fix trivial spelling
The word 'descriptor' is misspelled throughout the tree.

Fix it up accordingly:
    decriptors -> descriptors

Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-07-30 17:22:57 +09:00
Marc Zyngier
63ef91f24f PM / devfreq: rk3399_dmc: Fix kernel oops when rockchip,pmu is absent
Booting a recent kernel on a rk3399-based system (nanopc-t4),
equipped with a recent u-boot and ATF results in an Oops due
to a NULL pointer dereference.

This turns out to be due to the rk3399-dmc driver looking for
an *undocumented* property (rockchip,pmu), and happily using
a NULL pointer when the property isn't there.

Instead, make most of what was brought in with 9173c5ceb0
("PM / devfreq: rk3399_dmc: Pass ODT and auto power down parameters
to TF-A.") conditioned on finding this property in the device-tree,
preventing the driver from exploding.

Cc: stable@vger.kernel.org
Fixes: 9173c5ceb0 ("PM / devfreq: rk3399_dmc: Pass ODT and auto power down parameters to TF-A.")
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-07-30 17:22:57 +09:00