Update lpfc version to 14.2.0.7
Link: https://lore.kernel.org/r/20220911221505.117655-14-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This patch fixes below Smatch reported issues:
1. lpfc_hbadisc.c:3020 lpfc_mbx_cmpl_fcf_rr_read_fcf_rec()
error: uninitialized symbol 'vlan_id'.
2. lpfc_hbadisc.c:3121 lpfc_mbx_cmpl_read_fcf_rec()
error: uninitialized symbol 'vlan_id'.
3. lpfc_init.c:335 lpfc_dump_wakeup_param_cmpl()
warn: always true condition '(prg->dist < 4) => (0-3 < 4)'
4. lpfc_init.c:2419 lpfc_parse_vpd()
warn: inconsistent indenting.
5. lpfc_init.c:13248 lpfc_sli4_enable_msi()
warn: 'phba->pcidev->irq' 2147483648 can't fit into 65535
'eqhdl->irq'
6. lpfc_debugfs.c:5300 lpfc_idiag_extacc_avail_get()
error: uninitialized symbol 'ext_cnt'
7. lpfc_debugfs.c:5300 lpfc_idiag_extacc_avail_get()
error: uninitialized symbol 'ext_size'
8. lpfc_vmid.c:248 lpfc_vmid_get_appid()
warn: sleeping in atomic context.
9. lpfc_init.c:8342 lpfc_sli4_driver_resource_setup()
warn: missing error code 'rc'.
10. lpfc_init.c:13573 lpfc_sli4_hba_unset()
warn: variable dereferenced before check 'phba->pport' (see
line 13546)
11. lpfc_auth.c:1923 lpfc_auth_handle_dhchap_reply()
error: double free of 'hash_value'
Fixes:
1. Initialize vlan_id to LPFC_FCOE_NULL_VID.
2. Initialize vlan_id to LPFC_FCOE_NULL_VID.
3. prg->dist is a 2 bit field. Its value can only be between 0-3.
Remove redundent check 'if (prg->dist < 4)'.
4. Fix inconsistent indenting. Moved logic into helper function
lpfc_fill_vpd().
5. Define 'eqhdl->irq' as int value as pci_irq_vector() returns int.
Also, check for return value of pci_irq_vector() and log message in
case of failure.
6. Initialize 'ext_cnt' to 0.
7. Initialize 'ext_size' to 0.
8. Use alloc_percpu_gfp() with GFP_ATOMIC flag.
9. 'rc' was not updated when dma_pool_create() fails. Update 'rc =
-ENOMEM' when dma_pool_create() fails before calling goto statement.
10. Add check for 'phba->pport' in lpfc_cpuhp_remove().
11. Initialize 'hash_value' to NULL, same like 'aug_chal' variable.
Link: https://lore.kernel.org/r/20220911221505.117655-13-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Firmware reports link degrade signaling via ACQES.
Handlers and new additions to the SET_FEATURES mbox command are implemented
so that link degrade parameters for 64GB capable links are reported through
EDC ELS frames.
Link: https://lore.kernel.org/r/20220911221505.117655-12-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Removed the lpfc_fdmi_attr_entry and lpfc_fdmi_attr_def structures that had
a union causing unintentional zero padding, which required the usage of
__packed. They are replaced with explicit lpfc_fdmi_attr_u32,
lpfc_fdmi_attr_wwn, lpfc_fdmi_attr_fc4types, and lpfc_fdmi_attr_string
structure defines instead of living in a union. This rids of ambiguous
compiler zero padding, and entailed cleaning up bitwise endian
declarations.
As such, all FDMI attribute registration routines are replaced with generic
void *arg and handlers for each of the newly defined attribute structure
types.
Link: https://lore.kernel.org/r/20220911221505.117655-11-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Switch case logics are reworked so they appear more similar and
consistent. This eliminates compiler errors indicating unaligned pointer
values and packed members.
Added comments to explain previous size offset accumulations.
Link: https://lore.kernel.org/r/20220911221505.117655-10-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Clarify naming of the mp/bmp dma buffers:
- Rename mp to rq as it is the request buffer
- Rename bmp to rsp as it is the response buffer
This reduces confusion about what the buffer content is based on their
name.
Link: https://lore.kernel.org/r/20220911221505.117655-9-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
If there is a congestion or automated congestion response mode change, then
log the reported change to kmsg.
Link: https://lore.kernel.org/r/20220911221505.117655-8-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
On a PCI hotplug capable system, it is possible for scsi_device_put() to
happen after lpfc_pci_remove_one() is called. As a result, the
sdev->host->hostt->module dereference is for a previously freed memory
location because the phba structure containing the hostt template was
already freed when lpfc_pci_remove_one() returned.
Since the lpfc module is still loaded during power slot disable, all
scsi_host_templates should be declared as part of the global data segment
instead of inside the heap allocated phba structure. This way the
sdev->host->hostt memory area is always valid as long as the module is
loaded regardless if PCI hotplug dynamically allocates or frees phba
structures.
Move all scsi_host_templates in the phba structure to global variables.
Create a small helper routine to determine appropriate sg_tablesize during
shost allocation.
Link: https://lore.kernel.org/r/20220911221505.117655-7-jsmart2021@gmail.com
Co-developed-by: Dwip N. Banerjee <dnbanerg@us.ibm.com>
Signed-off-by: Dwip N. Banerjee <dnbanerg@us.ibm.com>
Co-developed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When a target makes the mistake of registering a FC4 type with the fabric,
but then rejects a PRLI of that type, the lpfc driver incorrectly retries
the PRLI causing multiple registrations with the transport. The driver
needs to detect the reject reason data and stop any retry.
Rework the PRLI reject scenarios.
Link: https://lore.kernel.org/r/20220911221505.117655-6-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Sometimes VMID targets are not getting rediscovered after a port reset.
The iocb is not freed in lpfc_cmpl_ct_cmd_vmid(), which is the completion
function for the appid CT commands. So after a port reset, the count of
sges is less than the expected count of 250. This causes post reset
operation logic to fail and keep the port offline.
Fix by freeing the iocb and kref put for the lpfc_cmpl_ct_cmd_vmid() early
return cases.
Link: https://lore.kernel.org/r/20220911221505.117655-5-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In a situation where the node state changes while a REG_LOGIN is in
progress, the LPFC_MBOXQ_t structure is cleared and reused for an
UNREG_LOGIN command to release RPI resources without first freeing the mbuf
pool resource allocated for REG_LOGIN.
Release mbuf pool resource prior to repurposing of the mailbox command
structure from REG_LOGIN to UNREG_LOGIN.
Link: https://lore.kernel.org/r/20220911221505.117655-4-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When a FLOGI is received before we have issued our FLOGI, the ACC response
to the received FLOGI is issued with SID 2 instead of the expected fabric
controller SID. Certain target vendors ignore the malformed ACC with SID 2
and wait for a properly filled ACC with a fabric controller SID.
The lpfc_sli_prep_wqe() routine depends on the FC_PT2PT flag to fill in the
fabric controller SID when in PT2PT mode, but due to a previous commit the
flag was getting cleared. Fix by adding a check for the defer_flogi_acc
flag to know whether or not to clear the FC_PT2PT flag on link up.
Link: https://lore.kernel.org/r/20220911221505.117655-3-jsmart2021@gmail.com
Fixes: 439b93293f ("scsi: lpfc: Fix unsolicited FLOGI receive handling during PT2PT discovery")
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The if statment check (prli_fc4_req & PRLI_NVME_TYPE) evaluates to true
when receiving a PRLI request for bogus FC4 type codes that happen to have
the 3rd or 5th bit set because PRLI_NVME_TYPE is 0x28. This leads to
sending a PRLI_NVME_ACC even for bogus FC4 type codes.
Change the bitwise & check to an exact == type code check to ensure we send
PRLI_NVME_ACC only for NVME type coded PRLI requests.
Link: https://lore.kernel.org/r/20220911221505.117655-2-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The error code from mpi3mr_post_transport_req() is supposed to be passed to
bsg_job_done(job, rc, reslen), but it isn't.
Link: https://lore.kernel.org/r/YyMISJzVDARpVwrr@kili
Fixes: 176d4aa69c ("scsi: mpi3mr: Support SAS transport class callbacks")
Acked-by: Sathya Prakash Veerichetty <sathya.prakash@broadcom.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
There are three error paths which return success:
1) Propagate the error code from mpi3mr_post_transport_req() if it fails.
2) Return -EINVAL if "ioc_status != MPI3_IOCSTATUS_SUCCESS".
3) Return -EINVAL if "le16_to_cpu(mpi_reply.response_data_length) !=
sizeof(struct rep_manu_reply)"
Link: https://lore.kernel.org/r/YyMIJh1HU2Qz9+Rs@kili
Fixes: 2bd37e2849 ("scsi: mpi3mr: Add framework to issue MPT transport cmds")
Acked-by: Sathya Prakash Veerichetty <sathya.prakash@broadcom.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
ahd_linux_setup_iocell_info() intentionally writes to the const-marked
aic79xx_iocell_info array, but is called during __init, so the location is
actually writable at this point on most architectures. Annotate this
explicitly with __ro_after_init to avoid static analysis confusion.
Link: https://lpc.events/event/16/contributions/1175/attachments/1109/2128/2022-LPC-analyzer-talk.pdf
Link: https://lore.kernel.org/r/20220914115953.3854029-1-keescook@chromium.org
Cc: Hannes Reinecke <hare@suse.com>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org
Reported-by: David Malcolm <dmalcolm@redhat.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
se_tmr_req_cache has been removed since commit c8e31f26fe ("target: Add
SCF_SCSI_TMR_CDB usage and drop se_tmr_req_cache").
Remove extern.
Link: https://lore.kernel.org/r/20220913023722.547249-3-cuigaosheng1@huawei.com
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
qla2x00_get_fw_version_str() has been removed since commit abbd8870b9
("[SCSI] qla2xxx: Factor-out ISP specific functions to method-based call
tables.").
qla2x00_release_nvram_protection() has been removed since commit
459c537807 ("[SCSI] qla2xxx: Add ISP24xx flash-manipulation routines.").
qla82xx_rdmem() and qla82xx_wrmem() have been removed since commit
3711333dfb ("[SCSI] qla2xxx: Updates for ISP82xx.").
qla25xx_rd_req_reg(), qla24xx_rd_req_reg(), qla25xx_wrt_rsp_reg(),
qla24xx_wrt_rsp_reg(), qla25xx_wrt_req_reg() and qla24xx_wrt_req_reg() have
been removed since commit 08029990b2 ("[SCSI] qla2xxx: Refactor
request/response-queue register handling.").
qla2x00_async_login_done() has been removed since commit 726b854870
("qla2xxx: Add framework for async fabric discovery").
qlt_24xx_process_response_error() has been removed since commit
c5419e2618 ("scsi: qla2xxx: Combine Active command arrays.").
Remove the declarations for them from header file.
Link: https://lore.kernel.org/r/20220913023722.547249-2-cuigaosheng1@huawei.com
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The default target port group is always returned in the list of port
groups, even if the behaviour is unwanted, i.e. it has no members and
non-default port groups are primary port groups.
That violates SPC-4 "6.37 REPORT TARGET PORT GROUPS command":
Every target port group shall contain at least one target port. The
target port group descriptor shall include one target port descriptor for
each target port in the target port group.
This patch hides port groups with no ports in REPORT TARGET PORT GROUPS
response.
Link: https://lore.kernel.org/r/20220912214549.27882-1-d.bogdanov@yadro.com
Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
SAM-5 4.8.3 (SCSI target device with multiple SCSI ports structure)
obligates to set MULTIP bit when there's multiple SCSI target ports:
Each device server shall indicate the presence of multiple SCSI
target ports by setting the MULTIP bit to one in its standard
INQUIRY data (see SPC-4).
Set MULTIP bit automatically to indicate the presence of multiple SCSI
target ports within standard inquiry response data if there are
multiple target ports in all target port groups of the se_device.
Link: https://lore.kernel.org/r/20220912125457.22573-2-d.bogdanov@yadro.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Co-developed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Remote devices may go missing from the per-device nexus reset part of the
HA nexus, i.e after the controller reset. This is because libsas may find
the devices to be gone as the phy may be temporarily down when processing
the bcast event generated from the nexus reset. Filter out bcast events
during this time to stop the devices being lost.
Link: https://lore.kernel.org/r/1662378529-101489-6-git-send-email-john.garry@huawei.com
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In resetting the controller, SATA devices may be lost.
The issue is that when we insert the bcast events to rescan the topology in
hisi_sas_rescan_topology(), when we subsequently nexus reset the SATA
devices in hisi_sas_async_I_T_nexus_reset(), there is a small timing window
in which the remote phy is down and we process the bcast event (meaning
that libsas judges that the disk is lost).
Ensure that all bcast events are processed prior to the nexus reset to
close this window.
Link: https://lore.kernel.org/r/1662378529-101489-4-git-send-email-john.garry@huawei.com
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Once the controller HW has been reset then we can unset flag
HISI_SAS_HW_FAULT_BIT. In clearing this flag earlier we can now
successfully execute commands in hisi_sas_controller_reset_done(), like
bcast processing.
Link: https://lore.kernel.org/r/1662378529-101489-3-git-send-email-john.garry@huawei.com
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Now that libsas and the SCSI core code limits the default sectors from
commit 4cbfca5f77 ("scsi: scsi_transport_sas: cap shost opt_sectors
according to DMA optimal limit") and commit 608128d391 ("scsi: sd: allow
max_sectors be capped at DMA optimal size limit"), there is no need for
the hack to limit the max HW sectors.
Link: https://lore.kernel.org/r/1662378529-101489-2-git-send-email-john.garry@huawei.com
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In preparation for FORTIFY_SOURCE performing run-time destination buffer
bounds checking for memcpy(), specify the destination output buffer
explicitly, instead of asking memcpy() to write past the end of what looked
like a fixed-size object. Silences future run-time warning:
memcpy: detected field-spanning write (size 80) of single field "trc + 1" (size 64)
There is no binary code output differences from this change.
Link: https://lore.kernel.org/r/20220901205729.2260982-1-keescook@chromium.org
Cc: Bradley Grove <linuxdrivers@attotech.com>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The original code will "goto out_disable_device" and call
pci_disable_device() if pci_enable_device() fails. The kernel will generate
a warning message like "3w-9xxx 0000:00:05.0: disabling already-disabled
device".
We shouldn't disable a device that failed to be enabled. A simple return is
fine.
Link: https://lore.kernel.org/r/20220829110115.38789-1-fantasquex@gmail.com
Reported-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Letu Ren <fantasquex@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Userspace may want to manually control when the data should go into
WriteBooster buffer. The control happens via "wb_on" node, but presently,
there is no simple way to check if WriteBooster is supported and
enabled.
Expose the Write Booster and Clock Scaling capabilities to be able to
determine if the Write Booster is available and if its manual control is
blocked by Clock Scaling mechanism.
Link: https://lore.kernel.org/r/20220829081845.v8.1.Ibf9efc9be50783eeee55befa2270b7d38552354c@changeid
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Daniil Lunev <dlunev@chromium.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The host codes that were supposed to only be used for internal use are now
not used, so remove them.
Link: https://lore.kernel.org/r/20220812010027.8251-11-michael.christie@oracle.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
If a driver returns:
- DID_TARGET_FAILURE
- DID_NEXUS_FAILURE
- DID_ALLOC_FAILURE
- DID_MEDIUM_ERROR
we hit a couple bugs:
1. The SCSI error handler runs because scsi_decide_disposition() has no
case statements for them and we return FAILED.
2. For SG IO the userspace app gets a success status instead of failed,
because scsi_result_to_blk_status() clears those errors.
This patch adds a new internal error code byte for use by the SCSI
midlayer. This will be used instead of the above error codes, so we don't
have to play that clearing the host code game in
scsi_result_to_blk_status() and drivers cannot accidentally use them.
A subsequent commit will then remove the internal users of the above codes
and convert us to use the new ones.
Link: https://lore.kernel.org/r/20220812010027.8251-9-michael.christie@oracle.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
DID_ALLOC_FAILURE is internal to the SCSI layer. Drivers must not use it
because:
1. It's not propagated upwards, so SG IO/passthrough users will not see an
error and think a command was successful.
2. There is no handling for it in scsi_decide_disposition() so it results
in entering SCSI error handling.
By the code comment, it looks like the driver wanted a retryable error
code, so this has it use DID_ERROR.
Link: https://lore.kernel.org/r/20220812010027.8251-8-michael.christie@oracle.com
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
DID_TARGET_FAILURE is internal to the SCSI layer. Drivers must not use it
because:
1. It's not propagated upwards, so SG IO/passthrough users will not see an
error and think a command was successful.
2. There is no handling for it in scsi_decide_disposition() so it
results in entering SCSI error handling.
This has qla2xxx use DID_NO_CONNECT because it looks like we hit this error
when we can't find a port. It will give us the same hard error behavior and
it seems to match the error where we can't find the endpoint.
Link: https://lore.kernel.org/r/20220812010027.8251-7-michael.christie@oracle.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
DID_NEXUS_FAILURE is internal to the SCSI layer. Drivers must not use it
because:
1. It's not propagated upwards, so SG IO/passthrough users will not see an
error and think a command was successful.
2. There is no handling for it in scsi_decide_disposition() so it results
in entering SCSI error handling.
virtio_scsi gets this when something like qemu returns
VIRTIO_SCSI_S_NEXUS_FAILURE. It looks like qemu returns that error code if
host OS returns DID_NEXUS_FAILURE (qemu's internal
SCSI_HOST_RESERVATION_ERROR maps to DID_NEXUS_FAILURE). This shouldn't
happen for Linux since we don't propagate that error code to userspace.
This has us convert VIRTIO_SCSI_S_NEXUS_FAILURE to a
SAM_STAT_RESERVATION_CONFLICT in case some other virt layer is returning
it. In that case we will still get the reservation confict failure we
expect.
Link: https://lore.kernel.org/r/20220812010027.8251-6-michael.christie@oracle.com
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
DID_TARGET_FAILURE is internal to the SCSI layer. Drivers must not use it
because:
1. It's not propagated upwards, so SG IO/passthrough users will not see an
error and think a command was successful.
2. There is no handling for it in scsi_decide_disposition() so it results
in entering SCSI error handling.
virtio_scsi gets this when something like qemu returns
VIRTIO_SCSI_S_TARGET_FAILURE. It looks like qemu returns that error code
if a host OS returns it, but this shouldn't happen for Linux since we never
propagate that error to userspace.
This has us use DID_BAD_TARGET in case some other virt layer is returning
it. In that case we will still get a hard error like before and it conveys
something unexpected happened.
Link: https://lore.kernel.org/r/20220812010027.8251-5-michael.christie@oracle.com
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
DID_TARGET_FAILURE is internal to the SCSI layer. Drivers must not use it
because:
1. It's not propagated upwards, so SG IO/passthrough users will not see an
error and think a command was successful.
2. There is no handling for it in scsi_decide_disposition() so it results
in entering SCSI error handling.
It looks like the driver wanted a hard failure so this swaps it with
DID_BAD_TARGET which gives us that behavior. The error looks like it's for
a case where the target did not support a TMF we wanted to use (maybe not a
bad target but disappointing so close enough).
Link: https://lore.kernel.org/r/20220812010027.8251-4-michael.christie@oracle.com
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
DID_TARGET_FAILURE is internal to the SCSI layer. Drivers must not use it
because:
1. It's not propagated upwards, so SG IO/passthrough users will not see an
error and think a command was successful.
2. There is no handling for it in scsi_decide_disposition() so it results
in the SCSI error handling running.
It looks like the driver wanted a hard failure so swap it with
DID_BAD_TARGET.
Link: https://lore.kernel.org/r/20220812010027.8251-3-michael.christie@oracle.com
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The error codes:
- DID_TARGET_FAILURE
- DID_NEXUS_FAILURE
- DID_ALLOC_FAILURE
- DID_MEDIUM_ERROR
are internal to the SCSI layer. Drivers must not use them because:
1. They are not propagated upwards, so SG IO/passthrough users will not
see an error and think a command was successful.
xen-scsiback will never see this error and should not try to send it.
2. There is no handling for them in scsi_decide_disposition() so if
xen-scsifront were to return the error to the SCSI midlayer then it
kicks off the error handler which is definitely not what we want.
Remove the use from xen-scsifront/back.
Link: https://lore.kernel.org/r/20220812010027.8251-2-michael.christie@oracle.com
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
{clear|set}_bit() can take an almost arbitrarily large bit number, so there
is no need to manually compute addresses. This is just redundant.
Link: https://lore.kernel.org/r/c3429a22023f58e5e5cc65d6cd7e83fb2bd9b870.1658340442.git.christophe.jaillet@wanadoo.fr
Tested-by: Don Brace <don.brace@microchip.com>
Acked-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Use bitmap_zalloc()/bitmap_free() instead of hand-writing them. It is less
verbose and it improves the semantic.
Link: https://lore.kernel.org/r/5f975ef43f8b7306e4ac4e2e8ce4bcd53f6092bb.1658340441.git.christophe.jaillet@wanadoo.fr
Tested-by: Don Brace <don.brace@microchip.com>
Acked-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Return the value from lpfc_issue_reg_vfi() directly instead of storing it
in another redundant variable.
Link: https://lore.kernel.org/r/20220824075123.221316-1-ye.xingchen@zte.com.cn
Reported-by: Zeal Robot <zealci@zte.com.cn>
Reviewed-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Return the value from lpfc_sli4_issue_wqe() directly instead of storing it
in another redundant variable.
Link: https://lore.kernel.org/r/20220824075017.221244-1-ye.xingchen@zte.com.cn
Reported-by: Zeal Robot <zealci@zte.com.cn>
Reviewed-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Correct a typo in SCSI documentation.
Link: https://lore.kernel.org/r/20220827221719.11006-1-rdunlap@infradead.org
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
drivers/scsi/qla2xxx/qla_os.c:40:20: warning: symbol 'qla_trc_array'
was not declared. Should it be static?
drivers/scsi/qla2xxx/qla_os.c:345:5: warning: symbol
'ql2xdelay_before_pci_error_handling' was not declared.
Should it be static?
Define qla_trc_array and ql2xdelay_before_pci_error_handling as static to
fix sparse warnings.
Link: https://lore.kernel.org/r/20220826102559.17474-7-njavali@marvell.com
Cc: stable@vger.kernel.org
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Older tracing of driver messages was to:
- log only debug messages to kernel main trace buffer; and
- log only if extended logging bits corresponding to this message is
off
This has been modified and extended as follows:
- Tracing is now controlled via ql2xextended_error_logging_ktrace
module parameter. Bit usages same as ql2xextended_error_logging.
- Tracing uses "qla2xxx" trace instance, unless instance creation have
issues.
- Tracing is enabled (compile time tunable).
- All driver messages, include debug and log messages are now traced in
kernel trace buffer.
Trace messages can be viewed by looking at the qla2xxx instance at:
/sys/kernel/tracing/instances/qla2xxx/trace
Trace tunable that takes the same bit mask as ql2xextended_error_logging
is:
ql2xextended_error_logging_ktrace (default=1)
Link: https://lore.kernel.org/r/20220826102559.17474-6-njavali@marvell.com
Suggested-by: Daniel Wagner <dwagner@suse.de>
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Tested-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
