Commit graph

146 commits

Author SHA1 Message Date
Alex Williamson
5a0ff17741 vfio-pci: Fix use after free
Reported by 0-day test infrastructure.

Fixes: ecaa1f6a01 ("vfio-pci: Add VGA arbiter client")
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-04-08 08:11:51 -06:00
Alex Williamson
6eb7018705 vfio-pci: Move idle devices to D3hot power state
We can save some power by putting devices that are bound to vfio-pci
but not in use by the user in the D3hot power state.  Devices get
woken into D0 when opened by the user.  Resets return the device to
D0, so we need to re-apply the low power state after a bus reset.
It's tempting to try to use D3cold, but we have no reason to inhibit
hotplug of idle devices and we might get into a loop of having the
device disappear before we have a chance to try to use it.

A new module parameter allows this feature to be disabled if there are
devices that misbehave as a result of this change.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-04-07 11:14:46 -06:00
Alex Williamson
561d72ddbb vfio-pci: Remove warning if try-reset fails
As indicated in the comment, this is not entirely uncommon and
causes user concern for no reason.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-04-07 11:14:44 -06:00
Alex Williamson
80c7e8cc2a vfio-pci: Allow PCI IDs to be specified as module options
This copies the same support from pci-stub for exactly the same
purpose, enabling a set of PCI IDs to be automatically added to the
driver's dynamic ID table at module load time.  The code here is
pretty simple and both vfio-pci and pci-stub are fairly unique in
being meta drivers, capable of attaching to any device, so there's no
attempt made to generalize the code into pci-core.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-04-07 11:14:43 -06:00
Alex Williamson
ecaa1f6a01 vfio-pci: Add VGA arbiter client
If VFIO VGA access is disabled for the user, either by CONFIG option
or module parameter, we can often opt-out of VGA arbitration.  We can
do this when PCI bridge control of VGA routing is possible.  This
means that we must have a parent bridge and there must only be a
single VGA device below that bridge.  Fortunately this is the typical
case for discrete GPUs.

Doing this allows us to minimize the impact of additional GPUs, in
terms of VGA arbitration, when they are only used via vfio-pci for
non-VGA applications.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-04-07 11:14:41 -06:00
Alex Williamson
88c0dead9f vfio-pci: Add module option to disable VGA region access
Add a module option so that we don't require a CONFIG change and
kernel rebuild to disable VGA support.  Not only can VGA support be
troublesome in itself, but by disabling it we can reduce the impact
to host devices by doing a VGA arbitration opt-out.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-04-07 11:14:40 -06:00
Alex Williamson
71be3423a6 vfio: Split virqfd into a separate module for vfio bus drivers
An unintended consequence of commit 42ac9bd18d ("vfio: initialize
the virqfd workqueue in VFIO generic code") is that the vfio module
is renamed to vfio_core so that it can include both vfio and virqfd.
That's a user visible change that may break module loading scritps
and it imposes eventfd support as a dependency on the core vfio code,
which it's really not.  virqfd is intended to be provided as a service
to vfio bus drivers, so instead of wrapping it into vfio.ko, we can
make it a stand-alone module toggled by vfio bus drivers.  This has
the additional benefit of removing initialization and exit from the
core vfio code.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-03-17 08:33:38 -06:00
kbuild test robot
66fdc052d7 vfio: virqfd_lock can be static
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Reviewed-by: Eric Auger <eric.auger@linaro.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-03-17 08:20:31 -06:00
Zhen Lei
2f51bf4be9 vfio: put off the allocation of "minor" in vfio_create_group
The next code fragment "list_for_each_entry" is not depend on "minor". With this
patch, the free of "minor" in "list_for_each_entry" can be reduced, and there is
no functional change.

Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-03-16 14:08:56 -06:00
Antonios Motakis
a7fa7c77cf vfio/platform: implement IRQ masking/unmasking via an eventfd
With this patch the VFIO user will be able to set an eventfd that can be
used in order to mask and unmask IRQs of platform devices.

Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com>
Signed-off-by: Baptiste Reynal <b.reynal@virtualopensystems.com>
Reviewed-by: Eric Auger <eric.auger@linaro.org>
Tested-by: Eric Auger <eric.auger@linaro.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-03-16 14:08:55 -06:00
Antonios Motakis
42ac9bd18d vfio: initialize the virqfd workqueue in VFIO generic code
Now we have finally completely decoupled virqfd from VFIO_PCI. We can
initialize it from the VFIO generic code, in order to safely use it from
multiple independent VFIO bus drivers.

Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com>
Signed-off-by: Baptiste Reynal <b.reynal@virtualopensystems.com>
Reviewed-by: Eric Auger <eric.auger@linaro.org>
Tested-by: Eric Auger <eric.auger@linaro.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-03-16 14:08:54 -06:00
Antonios Motakis
7e992d6927 vfio: move eventfd support code for VFIO_PCI to a separate file
The virqfd functionality that is used by VFIO_PCI to implement interrupt
masking and unmasking via an eventfd, is generic enough and can be reused
by another driver. Move it to a separate file in order to allow the code
to be shared.

Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com>
Signed-off-by: Baptiste Reynal <b.reynal@virtualopensystems.com>
Reviewed-by: Eric Auger <eric.auger@linaro.org>
Tested-by: Eric Auger <eric.auger@linaro.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-03-16 14:08:54 -06:00
Antonios Motakis
09bbcb8810 vfio: pass an opaque pointer on virqfd initialization
VFIO_PCI passes the VFIO device structure *vdev via eventfd to the handler
that implements masking/unmasking of IRQs via an eventfd. We can replace
it in the virqfd infrastructure with an opaque type so we can make use
of the mechanism from other VFIO bus drivers.

Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com>
Signed-off-by: Baptiste Reynal <b.reynal@virtualopensystems.com>
Reviewed-by: Eric Auger <eric.auger@linaro.org>
Tested-by: Eric Auger <eric.auger@linaro.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-03-16 14:08:53 -06:00
Antonios Motakis
9269c393e7 vfio: add local lock for virqfd instead of depending on VFIO PCI
The Virqfd code needs to keep accesses to any struct *virqfd safe, but
this comes into play only when creating or destroying eventfds, so sharing
the same spinlock with the VFIO bus driver is not necessary.

Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com>
Signed-off-by: Baptiste Reynal <b.reynal@virtualopensystems.com>
Reviewed-by: Eric Auger <eric.auger@linaro.org>
Tested-by: Eric Auger <eric.auger@linaro.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-03-16 14:08:52 -06:00
Antonios Motakis
bb78e9eaab vfio: virqfd: rename vfio_pci_virqfd_init and vfio_pci_virqfd_exit
The functions vfio_pci_virqfd_init and vfio_pci_virqfd_exit are not really
PCI specific, since we plan to reuse the virqfd code with more VFIO drivers
in addition to VFIO_PCI.

Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com>
[Baptiste Reynal: Move rename vfio_pci_virqfd_init and vfio_pci_virqfd_exit
from "vfio: add a vfio_ prefix to virqfd_enable and virqfd_disable and export"]
Signed-off-by: Baptiste Reynal <b.reynal@virtualopensystems.com>
Reviewed-by: Eric Auger <eric.auger@linaro.org>
Tested-by: Eric Auger <eric.auger@linaro.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-03-16 14:08:52 -06:00
Antonios Motakis
bdc5e1021b vfio: add a vfio_ prefix to virqfd_enable and virqfd_disable and export
We want to reuse virqfd functionality in multiple VFIO drivers; before
moving these functions to core VFIO, add the vfio_ prefix to the
virqfd_enable and virqfd_disable functions, and export them so they can
be used from other modules.

Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com>
Signed-off-by: Baptiste Reynal <b.reynal@virtualopensystems.com>
Reviewed-by: Eric Auger <eric.auger@linaro.org>
Tested-by: Eric Auger <eric.auger@linaro.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-03-16 14:08:51 -06:00
Antonios Motakis
06211b40ce vfio/platform: support for level sensitive interrupts
Level sensitive interrupts are exposed as maskable and automasked
interrupts and are masked and disabled automatically when they fire.

Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com>
[Baptiste Reynal: Move masked interrupt initialization from "vfio/platform:
trigger an interrupt via eventfd"]
Signed-off-by: Baptiste Reynal <b.reynal@virtualopensystems.com>
Reviewed-by: Eric Auger <eric.auger@linaro.org>
Tested-by: Eric Auger <eric.auger@linaro.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-03-16 14:08:50 -06:00
Antonios Motakis
57f972e2b3 vfio/platform: trigger an interrupt via eventfd
This patch allows to set an eventfd for a platform device's interrupt,
and also to trigger the interrupt eventfd from userspace for testing.
Level sensitive interrupts are marked as maskable and are handled in
a later patch. Edge triggered interrupts are not advertised as maskable
and are implemented here using a simple and efficient IRQ handler.

Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com>
[Baptiste Reynal: fix masked interrupt initialization]
Signed-off-by: Baptiste Reynal <b.reynal@virtualopensystems.com>
Reviewed-by: Eric Auger <eric.auger@linaro.org>
Tested-by: Eric Auger <eric.auger@linaro.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-03-16 14:08:50 -06:00
Antonios Motakis
9a36321c8d vfio/platform: initial interrupts support code
This patch is a skeleton for the VFIO_DEVICE_SET_IRQS IOCTL, around which
most IRQ functionality is implemented in VFIO.

Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com>
Signed-off-by: Baptiste Reynal <b.reynal@virtualopensystems.com>
Reviewed-by: Eric Auger <eric.auger@linaro.org>
Tested-by: Eric Auger <eric.auger@linaro.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-03-16 14:08:49 -06:00
Antonios Motakis
682704c41e vfio/platform: return IRQ info
Return information for the interrupts exposed by the device.
This patch extends VFIO_DEVICE_GET_INFO with the number of IRQs
and enables VFIO_DEVICE_GET_IRQ_INFO.

Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com>
Signed-off-by: Baptiste Reynal <b.reynal@virtualopensystems.com>
Reviewed-by: Eric Auger <eric.auger@linaro.org>
Tested-by: Eric Auger <eric.auger@linaro.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-03-16 14:08:48 -06:00
Antonios Motakis
fad4d5b1f0 vfio/platform: support MMAP of MMIO regions
Allow to memory map the MMIO regions of the device so userspace can
directly access them. PIO regions are not being handled at this point.

Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com>
Signed-off-by: Baptiste Reynal <b.reynal@virtualopensystems.com>
Reviewed-by: Eric Auger <eric.auger@linaro.org>
Tested-by: Eric Auger <eric.auger@linaro.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-03-16 14:08:48 -06:00
Antonios Motakis
6e3f264560 vfio/platform: read and write support for the device fd
VFIO returns a file descriptor which we can use to manipulate the memory
regions of the device. Usually, the user will mmap memory regions that are
addressable on page boundaries, however for memory regions where this is
not the case we cannot provide mmap functionality due to security concerns.
For this reason we also allow to use read and write functions to the file
descriptor pointing to the memory regions.

We implement this functionality only for MMIO regions of platform devices;
PIO regions are not being handled at this point.

Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com>
Signed-off-by: Baptiste Reynal <b.reynal@virtualopensystems.com>
Reviewed-by: Eric Auger <eric.auger@linaro.org>
Tested-by: Eric Auger <eric.auger@linaro.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-03-16 14:08:47 -06:00
Antonios Motakis
e8909e67ca vfio/platform: return info for device memory mapped IO regions
This patch enables the IOCTLs VFIO_DEVICE_GET_REGION_INFO ioctl call,
which allows the user to learn about the available MMIO resources of
a device.

Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com>
Signed-off-by: Baptiste Reynal <b.reynal@virtualopensystems.com>
Reviewed-by: Eric Auger <eric.auger@linaro.org>
Tested-by: Eric Auger <eric.auger@linaro.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-03-16 14:08:46 -06:00
Antonios Motakis
2e8567bbb5 vfio/platform: return info for bound device
A VFIO userspace driver will start by opening the VFIO device
that corresponds to an IOMMU group, and will use the ioctl interface
to get the basic device info, such as number of memory regions and
interrupts, and their properties. This patch enables the
VFIO_DEVICE_GET_INFO ioctl call.

Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com>
[Baptiste Reynal: added include in vfio_platform_common.c]
Signed-off-by: Baptiste Reynal <b.reynal@virtualopensystems.com>
Reviewed-by: Eric Auger <eric.auger@linaro.org>
Tested-by: Eric Auger <eric.auger@linaro.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-03-16 14:08:46 -06:00
Antonios Motakis
b13329adc2 vfio: amba: add the VFIO for AMBA devices module to Kconfig
Enable building the VFIO AMBA driver. VFIO_AMBA depends on VFIO_PLATFORM,
since it is sharing a portion of the code, and it is essentially implemented
as a platform device whose resources are discovered via AMBA specific APIs
in the kernel.

Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com>
Signed-off-by: Baptiste Reynal <b.reynal@virtualopensystems.com>
Reviewed-by: Eric Auger <eric.auger@linaro.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-03-16 14:08:45 -06:00
Antonios Motakis
36fe431f28 vfio: amba: VFIO support for AMBA devices
Add support for discovering AMBA devices with VFIO and handle them
similarly to Linux platform devices.

Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com>
Signed-off-by: Baptiste Reynal <b.reynal@virtualopensystems.com>
Reviewed-by: Eric Auger <eric.auger@linaro.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-03-16 14:08:44 -06:00
Antonios Motakis
5316153239 vfio: platform: add the VFIO PLATFORM module to Kconfig
Enable building the VFIO PLATFORM driver that allows to use Linux platform
devices with VFIO.

Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com>
Signed-off-by: Baptiste Reynal <b.reynal@virtualopensystems.com>
Reviewed-by: Eric Auger <eric.auger@linaro.org>
Tested-by: Eric Auger <eric.auger@linaro.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-03-16 14:08:44 -06:00
Antonios Motakis
9df85aaa43 vfio: platform: probe to devices on the platform bus
Driver to bind to Linux platform devices, and callbacks to discover their
resources to be used by the main VFIO PLATFORM code.

Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com>
Signed-off-by: Baptiste Reynal <b.reynal@virtualopensystems.com>
Reviewed-by: Eric Auger <eric.auger@linaro.org>
Tested-by: Eric Auger <eric.auger@linaro.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-03-16 14:08:43 -06:00
Antonios Motakis
de49fc0d99 vfio/platform: initial skeleton of VFIO support for platform devices
This patch forms the common skeleton code for platform devices support
with VFIO. This will include the core functionality of VFIO_PLATFORM,
however binding to the device and discovering the device resources will
be done with the help of a separate file where any Linux platform bus
specific code will reside.

This will allow us to implement support for also discovering AMBA devices
and their resources, but still reuse a large part of the VFIO_PLATFORM
implementation.

Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com>
[Baptiste Reynal: added includes in vfio_platform_private.h]
Signed-off-by: Baptiste Reynal <b.reynal@virtualopensystems.com>
Reviewed-by: Eric Auger <eric.auger@linaro.org>
Tested-by: Eric Auger <eric.auger@linaro.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-03-16 14:08:42 -06:00
Alexey Kardashevskiy
ec76f40070 vfio-pci: Add missing break to enable VFIO_PCI_ERR_IRQ_INDEX
This adds a missing break statement to VFIO_DEVICE_SET_IRQS handler
without which vfio_pci_set_err_trigger() would never be called.

While we are here, add another "break" to VFIO_PCI_REQ_IRQ_INDEX case
so if we add more indexes later, we won't miss it.

Fixes: 6140a8f562 ("vfio-pci: Add device request interface")
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-03-12 09:51:38 -06:00
Alex Williamson
6140a8f562 vfio-pci: Add device request interface
Userspace can opt to receive a device request notification,
indicating that the device should be released.  This is setup
the same way as the error IRQ and also supports eventfd signaling.
Future support may forcefully remove the device from the user if
the request is ignored.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-02-10 12:38:14 -07:00
Alex Williamson
cac80d6e38 vfio-pci: Generalize setup of simple eventfds
We want another single vector IRQ index to support signaling of
the device request to userspace.  Generalize the error reporting
IRQ index to avoid code duplication.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-02-10 12:37:57 -07:00
Alex Williamson
13060b64b8 vfio: Add and use device request op for vfio bus drivers
When a request is made to unbind a device from a vfio bus driver,
we need to wait for the device to become unused, ie. for userspace
to release the device.  However, we have a long standing TODO in
the code to do something proactive to make that happen.  To enable
this, we add a request callback on the vfio bus driver struct,
which is intended to signal the user through the vfio device
interface to release the device.  Instead of passively waiting for
the device to become unused, we can now pester the user to give
it up.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-02-10 12:37:47 -07:00
Alex Williamson
4a68810dbb vfio: Tie IOMMU group reference to vfio group
Move the iommu_group reference from the device to the vfio_group.
This ensures that the iommu_group persists as long as the vfio_group
remains.  This can be important if all of the device from an
iommu_group are removed, but we still have an outstanding vfio_group
reference; we can still walk the empty list of devices.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-02-06 15:05:06 -07:00
Alex Williamson
60720a0fc6 vfio: Add device tracking during unbind
There's a small window between the vfio bus driver calling
vfio_del_group_dev() and the device being completely unbound where
the vfio group appears to be non-viable.  This creates a race for
users like QEMU/KVM where the kvm-vfio module tries to get an
external reference to the group in order to match and release an
existing reference, while the device is potentially being removed
from the vfio bus driver.  If the group is momentarily non-viable,
kvm-vfio may not be able to release the group reference until VM
shutdown, making the group unusable until that point.

Bridge the gap between device removal from the group and completion
of the driver unbind by tracking it in a list.  The device is added
to the list before the bus driver reference is released and removed
using the existing unbind notifier.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-02-06 15:05:06 -07:00
Alex Williamson
c5e6688752 vfio/type1: Add conditional rescheduling
IOMMU operations can be expensive and it's not very difficult for a
user to give us a lot of work to do for a map or unmap operation.
Killing a large VM will vfio assigned devices can result in soft
lockups and IOMMU tracing shows that we can easily spend 80% of our
time with need-resched set.  A sprinkling of conf_resched() calls
after map and unmap calls has a very tiny affect on performance
while resulting in traces with <1% of calls overflowing into needs-
resched.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-02-06 14:19:12 -07:00
Alex Williamson
babbf17609 vfio/type1: Chunk contiguous reserved/invalid page mappings
We currently map invalid and reserved pages, such as often occur from
mapping MMIO regions of a VM through the IOMMU, using single pages.
There's really no reason we can't instead follow the methodology we
use for normal pages and find the largest possible physically
contiguous chunk for mapping.  The only difference is that we don't
do locked memory accounting for these since they're not back by RAM.

In most applications this will be a very minor improvement, but when
graphics and GPGPU devices are in play, MMIO BARs become non-trivial.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-02-06 10:59:16 -07:00
Alex Williamson
6fe1010d6d vfio/type1: DMA unmap chunking
When unmapping DMA entries we try to rely on the IOMMU API behavior
that allows the IOMMU to unmap a larger area than requested, up to
the size of the original mapping.  This works great when the IOMMU
supports superpages *and* they're in use.  Otherwise, each PAGE_SIZE
increment is unmapped separately, resulting in poor performance.

Instead we can use the IOVA-to-physical-address translation provided
by the IOMMU API and unmap using the largest contiguous physical
memory chunk available, which is also how vfio/type1 would have
mapped the region.  For a synthetic 1TB guest VM mapping and shutdown
test on Intel VT-d (2M IOMMU pagesize support), this achieves about
a 30% overall improvement mapping standard 4K pages, regardless of
IOMMU superpage enabling, and about a 40% improvement mapping 2M
hugetlbfs pages when IOMMU superpages are not available.  Hugetlbfs
with IOMMU superpages enabled is effectively unchanged.

Unfortunately the same algorithm does not work well on IOMMUs with
fine-grained superpages, like AMD-Vi, costing about 25% extra since
the IOMMU will automatically unmap any power-of-two contiguous
mapping we've provided it.  We add a routine and a domain flag to
detect this feature, leaving AMD-Vi unaffected by this unmap
optimization.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-02-06 10:58:56 -07:00
Wei Yang
7c2e211f3c vfio-pci: Fix the check on pci device type in vfio_pci_probe()
Current vfio-pci just supports normal pci device, so vfio_pci_probe() will
return if the pci device is not a normal device. While current code makes a
mistake. PCI_HEADER_TYPE is the offset in configuration space of the device
type, but we use this value to mask the type value.

This patch fixs this by do the check directly on the pci_dev->hdr_type.

Signed-off-by: Wei Yang <weiyang@linux.vnet.ibm.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Cc: stable@vger.kernel.org # v3.6+
2015-01-07 10:29:11 -07:00
Linus Torvalds
cc669743a3 VFIO updates for v3.19-rc1
- s390 support (Frank Blaschka)
  - Enable iommu-type1 for ARM SMMU (Will Deacon)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJUka+sAAoJECObm247sIsiiy0P/iqrQpv94Z7rUKRlV3K8YtJj
 8Oi5fLLnT2by9v5mS+KMElnQ5gLU/C5B/QGLMNrF2uQl8lguWSXJw37r7MkbIkpN
 RDLx1NhetLqbJ4CYLjyv/Jx3vl+Wr/2nNWRVIS5ajBmMjEgKVLvjYs4SaXELc3a8
 a3YzcGW10BrVFlCJgUYqYIFGS1BmKjf7fbD5YBocj8tPv6NAlCiNNYYr+0pzW8Lf
 GTi39JlZ2t06hDq33eiUkrySWNjrIBn4g4PfAl7HBAscsZKS1w18MD1qVw4UXXa2
 15+CBbsHU7ZLVo6G7vuZeJNCX9tdQ0WIZWQzHstQa914l86WYImTJ2tyH7Rn0ZcQ
 3Mu9fzef9JgjkI56ol2zDwuOs+qttOYaLWjhhHiW4jkIxdnljnesIFlvmM3XeDGz
 3Zowg09HzE3K+dt8265jVKkcNJbPLzspLvF27nPMudZNHBozcoPE0jKxU7QC3eMT
 Ij36+puQq+jccUic3Np6rxk5tzTHEat1a7w3IUwXCCUP5P5QW+kuuIjbd4hqQkHn
 VDRjnT6MWC3GguUCXR5VyO0zezpI20pTbWwE8u2qwnE349m0Eq/vxytj2lCLYLPR
 Jjtdduf1/Ppam7tATd3PwTu6KljY3dJiUUikyOc1J0KmkgkSMw+BtR6G7qytyW4q
 /fhClcsaNtxSheVh0N+b
 =1L2V
 -----END PGP SIGNATURE-----

Merge tag 'vfio-v3.19-rc1' of git://github.com/awilliam/linux-vfio

Pull VFIO updates from Alex Williamson:
 - s390 support (Frank Blaschka)
 - Enable iommu-type1 for ARM SMMU (Will Deacon)

* tag 'vfio-v3.19-rc1' of git://github.com/awilliam/linux-vfio:
  drivers/vfio: allow type-1 IOMMU instantiation on top of an ARM SMMU
  vfio: make vfio run on s390
2014-12-17 10:44:22 -08:00
Jiang Liu
83a18912b0 PCI/MSI: Rename write_msi_msg() to pci_write_msi_msg()
Rename write_msi_msg() to pci_write_msi_msg() to mark it as PCI
specific.

Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Yingjoe Chen <yingjoe.chen@mediatek.com>
Cc: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-11-23 13:01:45 +01:00
Will Deacon
5e9f36c59a drivers/vfio: allow type-1 IOMMU instantiation on top of an ARM SMMU
The ARM SMMU driver is compatible with the notion of a type-1 IOMMU in
VFIO.

This patch allows VFIO_IOMMU_TYPE1 to be selected if ARM_SMMU=y.

Signed-off-by: Will Deacon <will.deacon@arm.com>
[aw: update for existing S390 patch]
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2014-11-14 09:10:59 -07:00
Frank Blaschka
1d53a3a7d3 vfio: make vfio run on s390
add Kconfig switch to hide INTx
add Kconfig switch to let vfio announce PCI BARs are not mapable

Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2014-11-07 09:52:22 -07:00
Linus Torvalds
23971bdfff IOMMU Updates for Linux v3.18
This pull-request includes:
 
 	* Change in the IOMMU-API to convert the former iommu_domain_capable
 	  function to just iommu_capable
 
 	* Various fixes in handling RMRR ranges for the VT-d driver (one fix
 	  requires a device driver core change which was acked
 	  by Greg KH)
 
 	* The AMD IOMMU driver now assigns and deassigns complete alias groups
 	  to fix issues with devices using the wrong PCI request-id
 
 	* MMU-401 support for the ARM SMMU driver
 
 	* Multi-master IOMMU group support for the ARM SMMU driver
 
 	* Various other small fixes all over the place
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJUPNxYAAoJECvwRC2XARrjMwMP/RLSr+oA31rGVjLXcmcCHl7Q
 Uj7xpcnG19qB0aqNR1JeJuZNkK/tw44pE353MQPbz4N9UVUiogklGIVD1iJvFV53
 0qm84bvpDJIof4aP35B3H3Umft2USTn/lmsQg/RklQcNTW8DzNj63b8BTNR7k/GL
 G7bLg7F1BUCl0shZCCsFspOIulQPAJYN2OvHlfYBav/bfDvfouQ3lrV+loGrK44r
 F2Hmp+imXlIhUCjfbiWz6wKFxvPrxZx482vm2pXBCSnXEdW4/fz6nf9VHUK/Cfsq
 JAimY1CfiDo1aqH9/yVHUOw5SD/NYOXq6E5bFPg/WENbipbbae5cK2u6PX5MMBAn
 CG4BM8l9xicfGPqgn5YFSRY/6qC6K7NlxMnt9U8l18QIkDVDqEtUgJQISJuce7wx
 FWx6eSWaxpIe5yhq19/h2ELalUUyR/fPq+UXXjYDL1kLV/vcvC/lC3mbNAQU93zU
 WK0bG2tDg88JHavc25Ewa2aOn4BVM2BpwuLbYlgQReaEmsQRnEPgtmRNyLJHqbFE
 wwpCj8pBWdufsJWRyvpnXQ+CfA7oSz4e7hz1G+0/5uiDmagfvg16Ql5JtPmmuLUm
 Kc3dVIiG0s1ewohZIIJETGCqprQbCSqs8CCQqB6p2zDBWFKpNT7F38lm/KlehkCz
 JpAiI7Y2K9Jejp0VIPrt
 =OMOt
 -----END PGP SIGNATURE-----

Merge tag 'iommu-updates-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu

Pull IOMMU updates from Joerg Roedel:
 "This pull-request includes:

   - change in the IOMMU-API to convert the former iommu_domain_capable
     function to just iommu_capable

   - various fixes in handling RMRR ranges for the VT-d driver (one fix
     requires a device driver core change which was acked by Greg KH)

   - the AMD IOMMU driver now assigns and deassigns complete alias
     groups to fix issues with devices using the wrong PCI request-id

   - MMU-401 support for the ARM SMMU driver

   - multi-master IOMMU group support for the ARM SMMU driver

   - various other small fixes all over the place"

* tag 'iommu-updates-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (41 commits)
  iommu/vt-d: Work around broken RMRR firmware entries
  iommu/vt-d: Store bus information in RMRR PCI device path
  iommu/vt-d: Only remove domain when device is removed
  driver core: Add BUS_NOTIFY_REMOVED_DEVICE event
  iommu/amd: Fix devid mapping for ivrs_ioapic override
  iommu/irq_remapping: Fix the regression of hpet irq remapping
  iommu: Fix bus notifier breakage
  iommu/amd: Split init_iommu_group() from iommu_init_device()
  iommu: Rework iommu_group_get_for_pci_dev()
  iommu: Make of_device_id array const
  amd_iommu: do not dereference a NULL pointer address.
  iommu/omap: Remove omap_iommu unused owner field
  iommu: Remove iommu_domain_has_cap() API function
  IB/usnic: Convert to use new iommu_capable() API function
  vfio: Convert to use new iommu_capable() API function
  kvm: iommu: Convert to use new iommu_capable() API function
  iommu/tegra: Convert to iommu_capable() API function
  iommu/msm: Convert to iommu_capable() API function
  iommu/vt-d: Convert to iommu_capable() API function
  iommu/fsl: Convert to iommu_capable() API function
  ...
2014-10-15 07:23:49 +02:00
Linus Torvalds
27a9716bc8 VFIO updates for v3.18-rc1
- Nested IOMMU extension to type1 (Will Deacon)
  - Restore MSIx message before enabling (Gavin Shan)
  - Fix remove path locking (Alex Williamson)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJUOOETAAoJECObm247sIsihDQP/jADEe9KFu4ymWu7rqi24w1L
 81hGNLXlfx2PPomluN3jENpyueo7vWdP5yZ8q/bi6oF6UbShL8Po01UKHOJzJJwW
 8GW86YcNsmPz/jl8Jcdbkex3dKvT1OzrDjFjCiKTJBHxE9nEdtWlRV8mO1pwd00t
 YFiXF8xFbkpHExMiQNU36rq/fzZCTOu4ZpCK9kDT7Sy+lsKAnGoXuM1IZK+7DGJo
 jcsMF32DVDmji6riy3uHHPc0qprP24QNVy6FfOmLEUvuOEIUOxMAYM9je9mmsHeS
 CeR/NHexr4RgYQE33jL1w8A1saT0rbu7DSKSa7OQebnY2Zte+oncLtqFZR2/Wylh
 jBU5r7P3PdxM6ykqEeC/3ytx7iFX6c7jc0SU4I5m8bFexmUQXqOko28gGIt0OL3n
 R8CmNF/MDs3gqYprhW6MvSJI1diY1+pX7pX0e7k7lDAoZ1QOjPNSGv+YOfF3H1YB
 AggIVxIKXW0T0bQ/hKcQiDKkxQ88vi1hld2LknbiBW9nMNLjNkxl2RZSGunFvWWN
 LzOYkBgR6rrTbhTvsWApsfYguYtGkgAGGJZSR1oev0BJnx4UHOfL1bykJRyUHdUd
 KDSBEni5TY65087IKD93nkyRhassszOa9XHmRDwQLxQeJCKRZi6bQRSzFZVheXIO
 O3XINOo2wNF1bIrfD/vR
 =s2+/
 -----END PGP SIGNATURE-----

Merge tag 'vfio-v3.18-rc1' of git://github.com/awilliam/linux-vfio

Pull VFIO updates from Alex Williamson:
 - Nested IOMMU extension to type1 (Will Deacon)
 - Restore MSIx message before enabling (Gavin Shan)
 - Fix remove path locking (Alex Williamson)

* tag 'vfio-v3.18-rc1' of git://github.com/awilliam/linux-vfio:
  vfio-pci: Fix remove path locking
  drivers/vfio: Export vfio_spapr_iommu_eeh_ioctl() with GPL
  vfio/pci: Restore MSIx message prior to enabling
  PCI: Export MSI message relevant functions
  vfio/iommu_type1: add new VFIO_TYPE1_NESTING_IOMMU IOMMU type
  iommu: introduce domain attribute for nesting IOMMUs
2014-10-11 06:49:24 -04:00
Alex Williamson
93899a679f vfio-pci: Fix remove path locking
Locking both the remove() and release() path results in a deadlock
that should have been obvious.  To fix this we can get and hold the
vfio_device reference as we evaluate whether to do a bus/slot reset.
This will automatically block any remove() calls, allowing us to
remove the explict lock.  Fixes 61d792562b.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Cc: stable@vger.kernel.org	[3.17]
2014-09-29 17:18:39 -06:00
Gavin Shan
0f905ce2b5 drivers/vfio: Export vfio_spapr_iommu_eeh_ioctl() with GPL
The function should have been exported with EXPORT_SYMBOL_GPL()
as part of commit 92d18a6851 ("drivers/vfio: Fix EEH build error").

Suggested-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2014-09-29 10:31:51 -06:00
Gavin Shan
b8f02af096 vfio/pci: Restore MSIx message prior to enabling
The MSIx vector table lives in device memory, which may be cleared as
part of a backdoor device reset. This is the case on the IBM IPR HBA
when the BIST is run on the device. When assigned to a QEMU guest,
the guest driver does a pci_save_state(), issues a BIST, then does a
pci_restore_state(). The BIST clears the MSIx vector table, but due
to the way interrupts are configured the pci_restore_state() does not
restore the vector table as expected. Eventually this results in an
EEH error on Power platforms when the device attempts to signal an
interrupt with the zero'd table entry.

Fix the problem by restoring the host cached MSI message prior to
enabling each vector.

Reported-by: Wen Xiong <wenxiong@linux.vnet.ibm.com>
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2014-09-29 10:16:24 -06:00
Will Deacon
f5c9ecebaf vfio/iommu_type1: add new VFIO_TYPE1_NESTING_IOMMU IOMMU type
VFIO allows devices to be safely handed off to userspace by putting
them behind an IOMMU configured to ensure DMA and interrupt isolation.
This enables userspace KVM clients, such as kvmtool and qemu, to further
map the device into a virtual machine.

With IOMMUs such as the ARM SMMU, it is then possible to provide SMMU
translation services to the guest operating system, which are nested
with the existing translation installed by VFIO. However, enabling this
feature means that the IOMMU driver must be informed that the VFIO domain
is being created for the purposes of nested translation.

This patch adds a new IOMMU type (VFIO_TYPE1_NESTING_IOMMU) to the VFIO
type-1 driver. The new IOMMU type acts identically to the
VFIO_TYPE1v2_IOMMU type, but additionally sets the DOMAIN_ATTR_NESTING
attribute on its IOMMU domains.

Cc: Joerg Roedel <joro@8bytes.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2014-09-29 10:06:19 -06:00
Chen, Gong
846fc70986 PCI/AER: Rename PCI_ERR_UNC_TRAIN to PCI_ERR_UNC_UND
In PCIe r1.0, sec 5.10.2, bit 0 of the Uncorrectable Error Status, Mask,
and Severity Registers was for "Training Error." In PCIe r1.1, sec 7.10.2,
bit 0 was redefined to be "Undefined."

Rename PCI_ERR_UNC_TRAIN to PCI_ERR_UNC_UND to reflect this change.

No functional change.

[bhelgaas: changelog]
Signed-off-by: Chen, Gong <gong.chen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-09-25 09:42:40 -06:00