Commit graph

1740 commits

Author SHA1 Message Date
Tejun Heo
2aa4a1523b blkcg: BLKIO_STAT_CPU_SECTORS doesn't have subcounters
BLKIO_STAT_CPU_SECTORS doesn't need read/write/sync/async subcounters
and is counted by blkio_group_stats_cpu->sectors; however, it still
holds a member in blkio_group_stats_cpu->stat_arr_cpu.

Rearrange stat_type_cpu and define BLKIO_STAT_CPU_ARR_NR and use it
for stat_arr_cpu[] size so that only SERVICE_BYTES and SERVICED have
subcounters.

Signed-off-by: Tejun Heo <tj@kernel.org>
2012-04-01 14:38:42 -07:00
Tejun Heo
aaec55a002 blkcg: remove unused @pol and @plid parameters
@pol to blkg_to_pdata() and @plid to blkg_lookup_create() are no
longer necessary.  Drop them.

Signed-off-by: Tejun Heo <tj@kernel.org>
2012-04-01 14:38:42 -07:00
Tao Ma
5bf14c0727 block: Make cfq_target_latency tunable through sysfs.
In cfq, when we calculate a time slice for a process(or a cfqq to
be precise), we have to consider the cfq_target_latency so that all the
sync request have an estimated latency(300ms) and it is controlled by
cfq_target_latency. But in some hadoop test, we have found that if
there are many processes doing sequential read(24 for example), the
throughput is bad because every process can only work for about 25ms
and the cfqq is switched. That leads to a higher disk seek. We can
achive the good throughput by setting low_latency=0, but then some
read's latency is too much for the application.

So this patch makes cfq_target_latency tunable through sysfs so that
we can tune it and find some magic number which is not bad for both
the throughput and the read latency.

Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-04-01 14:33:39 -07:00
Tejun Heo
959d851caa Merge branch 'for-3.5' of ../cgroup into block/for-3.5/core-merged
cgroup/for-3.5 contains the following changes which blk-cgroup needs
to proceed with the on-going cleanup.

* Dynamic addition and removal of cftypes to make config/stat file
  handling modular for policies.

* cgroup removal update to not wait for css references to drain to fix
  blkcg removal hang caused by cfq caching cfqgs.

Pull in cgroup/for-3.5 into block/for-3.5/core.  This causes the
following conflicts in block/blk-cgroup.c.

* 761b3ef50e "cgroup: remove cgroup_subsys argument from callbacks"
  conflicts with blkiocg_pre_destroy() addition and blkiocg_attach()
  removal.  Resolved by removing @subsys from all subsys methods.

* 676f7c8f84 "cgroup: relocate cftype and cgroup_subsys definitions in
  controllers" conflicts with ->pre_destroy() and ->attach() updates
  and removal of modular config.  Resolved by dropping forward
  declarations of the methods and applying updates to the relocated
  blkio_subsys.

* 4baf6e3325 "cgroup: convert all non-memcg controllers to the new
  cftype interface" builds upon the previous item.  Resolved by adding
  ->base_cftypes to the relocated blkio_subsys.

Signed-off-by: Tejun Heo <tj@kernel.org>
2012-04-01 12:55:00 -07:00
Tejun Heo
4baf6e3325 cgroup: convert all non-memcg controllers to the new cftype interface
Convert debug, freezer, cpuset, cpu_cgroup, cpuacct, net_prio, blkio,
net_cls and device controllers to use the new cftype based interface.
Termination entry is added to cftype arrays and populate callbacks are
replaced with cgroup_subsys->base_cftypes initializations.

This is functionally identical transformation.  There shouldn't be any
visible behavior change.

memcg is rather special and will be converted separately.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Paul Menage <paul@paulmenage.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Vivek Goyal <vgoyal@redhat.com>
2012-04-01 12:09:55 -07:00
Tejun Heo
676f7c8f84 cgroup: relocate cftype and cgroup_subsys definitions in controllers
blk-cgroup, netprio_cgroup, cls_cgroup and tcp_memcontrol
unnecessarily define cftype array and cgroup_subsys structures at the
top of the file, which is unconventional and necessiates forward
declaration of methods.

This patch relocates those below the definitions of the methods and
removes the forward declarations.  Note that forward declaration of
tcp_files[] is added in tcp_memcontrol.c for tcp_init_cgroup().  This
will be removed soon by another patch.

This patch doesn't introduce any functional change.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizf@cn.fujitsu.com>
2012-04-01 12:09:55 -07:00
Andi Kleen
8bcb6c7d48 block: use lockdep_assert_held for queue locking
Instead of an ugly open coded variant.

Cc: axboe@kernel.dk
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-03-30 12:33:28 +02:00
Dan Carpenter
a5567932fc blkcg: change a spin_lock() to spin_lock_irq()
Smatch complains that we re-enable IRQs twice.  It looks like we forgot
to disable them here on the spin_trylock() failure path.  This was added
in 9f13ef678e "blkcg: use double locking instead of RCU for blkg
synchronization".

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>`
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-03-29 20:57:08 +02:00
Tejun Heo
eb7d8c07f9 cfq: fix cfqg ref handling when BLK_CGROUP && !CFQ_GROUP_IOSCHED
When BLK_CGROUP is enabled but CFQ_GROUP_IOSCHED is, cfq ends up
calling blkg_get/put() on dummy cfqg leading to the following crash.

  BUG: unable to handle kernel NULL pointer dereference at 00000000000000b0
  IP: [<ffffffff813d44d8>] cfq_init_queue+0x258/0x430
  PGD 0
  Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
  CPU 0
  Modules linked in:

  Pid: 1, comm: swapper/0 Not tainted 3.3.0-rc6-work+ #125 Bochs Bochs
  RIP: 0010:[<ffffffff813d44d8>]  [<ffffffff813d44d8>] cfq_init_queue+0x258/0x430
  RSP: 0018:ffff88001f9dfd80  EFLAGS: 00010046
  RAX: ffff88001aefbbf0 RBX: ffff88001aeedbf0 RCX: 0000000000000100
  RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffff820ffd40
  RBP: ffff88001f9dfdd0 R08: 0000000000000000 R09: 0000000000000001
  R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000
  R13: 0000000000000009 R14: ffff88001aefbc30 R15: 0000000000000003
  FS:  0000000000000000(0000) GS:ffff88001fc00000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
  CR2: 00000000000000b0 CR3: 000000000206f000 CR4: 00000000000006f0
  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
  Process swapper/0 (pid: 1, threadinfo ffff88001f9de000, task ffff88001f9dc040)
  Stack:
   ffff88001aeedbf0 ffff88001aefbdb0 ffff88001aef1548 ffff88001aefbbf0
   ffff88001f9dfdd0 ffff88001aef1548 ffffffff820d6320 ffffffff8165ce30
   ffffffff82c555e0 ffff88001aeebbf0 ffff88001f9dfe00 ffffffff813b0507
  Call Trace:
   [<ffffffff813b0507>] elevator_init+0xd7/0x140
   [<ffffffff813b83d5>] blk_init_allocated_queue+0x125/0x150
   [<ffffffff813b94d3>] blk_init_queue_node+0x43/0x80
   [<ffffffff813b9523>] blk_init_queue+0x13/0x20
   [<ffffffff821aec00>] floppy_init+0x82/0xec7
   [<ffffffff810001d2>] do_one_initcall+0x42/0x170
   [<ffffffff821835fc>] kernel_init+0xcb/0x14f
   [<ffffffff81b40b24>] kernel_thread_helper+0x4/0x10
  Code: 00 e8 1d 9e 76 00 48 8b 43 48 48 85 c0 48 89 83 28 03 00 00 74 07 4c 8b a0 10 ff ff ff 8b 15 b0 2e d0 00 85 d2 0f 85 49 01 00 00 <41> 8b 84 24 b0 00 00 00 85 c0 0f 8e 8c 01 00 00 83 e8 01 85 c0
  RIP  [<ffffffff813d44d8>] cfq_init_queue+0x258/0x430

Because cfq's blkcg support has a on/off switch, CFQ_GROUP_IOSCHED,
separate from BLK_CGROUP, blkg access through cfqg needs to be
conditioned on it.

* Make blkg_to_cfqg() and cfqg_to_blkg() conditioned on
  CFQ_GROUP_IOSCHED.  If disabled, they always return %NULL.

* Introduce cfqg_get() and cfqg_put() conditioned on
  CFQ_GROUP_IOSCHED.  If disabled, they are noops.

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-03-23 14:02:53 +01:00
Dan Carpenter
00380a404f block: blk_alloc_queue_node(): use caller's GFP flags instead of GFP_KERNEL
We should use the GFP flags that the caller specified instead of picking
our own.  All the callers specify GFP_KERNEL so this doesn't make a
difference to how the kernel runs, it's just a cleanup.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-03-23 09:58:54 +01:00
Linus Torvalds
0d9cabdcce Merge branch 'for-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup changes from Tejun Heo:
 "Out of the 8 commits, one fixes a long-standing locking issue around
  tasklist walking and others are cleanups."

* 'for-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  cgroup: Walk task list under tasklist_lock in cgroup_enable_task_cg_list
  cgroup: Remove wrong comment on cgroup_enable_task_cg_list()
  cgroup: remove cgroup_subsys argument from callbacks
  cgroup: remove extra calls to find_existing_css_set
  cgroup: replace tasklist_lock with rcu_read_lock
  cgroup: simplify double-check locking in cgroup_attach_proc
  cgroup: move struct cgroup_pidlist out from the header file
  cgroup: remove cgroup_attach_task_current_cg()
2012-03-20 18:11:21 -07:00
Linus Torvalds
2ba68940c8 Merge branch 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler changes for v3.4 from Ingo Molnar

* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (27 commits)
  printk: Make it compile with !CONFIG_PRINTK
  sched/x86: Fix overflow in cyc2ns_offset
  sched: Fix nohz load accounting -- again!
  sched: Update yield() docs
  printk/sched: Introduce special printk_sched() for those awkward moments
  sched/nohz: Correctly initialize 'next_balance' in 'nohz' idle balancer
  sched: Cleanup cpu_active madness
  sched: Fix load-balance wreckage
  sched: Clean up parameter passing of proc_sched_autogroup_set_nice()
  sched: Ditch per cgroup task lists for load-balancing
  sched: Rename load-balancing fields
  sched: Move load-balancing arguments into helper struct
  sched/rt: Do not submit new work when PI-blocked
  sched/rt: Prevent idle task boosting
  sched/wait: Add __wake_up_all_locked() API
  sched/rt: Document scheduler related skip-resched-check sites
  sched/rt: Use schedule_preempt_disabled()
  sched/rt: Add schedule_preempt_disabled()
  sched/rt: Do not throttle when PI boosting
  sched/rt: Keep period timer ticking when rt throttling is active
  ...
2012-03-20 10:31:44 -07:00
Tejun Heo
2b566fa55b block: remove ioc_*_changed()
After the previous patch to cfq, there's no ioc_get_changed() user
left.  This patch yanks out ioc_{ioprio|cgroup|get}_changed() and all
related stuff.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-03-20 12:47:48 +01:00
Tejun Heo
598971bfbd cfq: don't use icq_get_changed()
cfq caches the associated cfqq's for a given cic.  The cache needs to
be flushed if the cic's ioprio or blkcg has changed.  It is currently
done by requiring the changing action to set the respective
ICQ_*_CHANGED bit in the icq and testing it from cfq_set_request(),
which involves iterating through all the affected icqs.

All cfq wants to know is whether ioprio and/or blkcg have changed
since the last flush and can be easily achieved by just remembering
the current ioprio and blkcg ID in cic.

This patch adds cic->{ioprio|blkcg_id}, updates all ioprio users to
use the remembered value instead, and updates cfq_set_request() path
such that, instead of using icq_get_changed(), the current values are
compared against the remembered ones and trigger appropriate flush
action if not.  Condition tests are moved inside both _changed
functions which are now named check_ioprio_changed() and
check_blkcg_changed().

ioprio.h::task_ioprio*() can't be used anymore and replaced with
open-coded IOPRIO_CLASS_NONE case in cfq_async_queue_prio().

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-03-20 12:47:47 +01:00
Tejun Heo
abede6da27 cfq: pass around cfq_io_cq instead of io_context
Now that io_cq is managed by block core and guaranteed to exist for
any in-flight request, it is easier and carries more information to
pass around cfq_io_cq than io_context.

This patch updates cfq_init_prio_data(), cfq_find_alloc_queue() and
cfq_get_queue() to take @cic instead of @ioc.  This change removes a
duplicate cfq_cic_lookup() from cfq_find_alloc_queue().

This change enables the use of cic-cached ioprio in the next patch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-03-20 12:47:47 +01:00
Tejun Heo
9a9e8a26da blkcg: add blkcg->id
Add 64bit unique id to blkcg.  This will be used by policies which
want blkcg identity test to tell whether the associated blkcg has
changed.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-03-20 12:47:47 +01:00
Tejun Heo
edf1b879e3 blkcg: remove blkio_group->stats_lock
With recent plug merge updates, all non-percpu stat updates happen
under queue_lock making stats_lock unnecessary to synchronize stat
updates.  The only synchronization necessary is stat reading, which
can be done using u64_stats_sync instead.

This patch removes blkio_group->stats_lock and adds
blkio_group_stats->syncp for reader synchronization.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-03-20 12:45:37 +01:00
Tejun Heo
c4c76a0538 blkcg: restructure blkio_get_stat()
Restructure blkio_get_stat() to prepare for removal of stats_lock.

* Define BLKIO_STAT_ARR_NR explicitly to denote which stats have
  subtypes instead of using BLKIO_STAT_QUEUED.

* Separate out stat acquisition and printing.  After this, there are
  only two users of blkio_fill_stat().  Just open code it.

* The code was mixing MAX_KEY_LEN and MAX_KEY_LEN - 1.  There's no
  need to subtract one.  Use MAX_KEY_LEN consistently.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-03-20 12:45:37 +01:00
Tejun Heo
997a026c80 blkcg: simplify stat reset
blkiocg_reset_stats() implements stat reset for blkio.reset_stats
cgroupfs file.  This feature is very unconventional and something
which shouldn't have been merged.  It's only useful when there's only
one user or tool looking at the stats.  As soon as multiple users
and/or tools are involved, it becomes useless as resetting disrupts
other usages.  There are very good reasons why all other stats expect
readers to read values at the start and end of a period and subtract
to determine delta over the period.

The implementation is rather complex - some fields shouldn't be
cleared and it saves some fields, resets whole and restores for some
reason.  Reset of percpu stats is also racy.  The comment points to
64bit store atomicity for the reason but even without that stores for
zero can simply race with other CPUs doing RMW and get clobbered.

Simplify reset by

* Clear selectively instead of resetting and restoring.

* Grouping debug stat fields to be reset and using memset() over them.

* Not caring about stats_lock.

* Using memset() to reset percpu stats.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-03-20 12:45:37 +01:00
Tejun Heo
5fe224d2d5 blkcg: don't use percpu for merged stats
With recent plug merge updates, merged stats are no longer called for
plug merges and now only updated while holding queue_lock.  As
stats_lock is scheduled to be removed, there's no reason to use percpu
for merged stats.  Don't use percpu for merged stats.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-03-20 12:45:37 +01:00
Vivek Goyal
1cd9e039fc blkcg: alloc per cpu stats from worker thread in a delayed manner
Current per cpu stat allocation assumes GFP_KERNEL allocation flag. But in
IO path there are times when we want GFP_NOIO semantics. As there is no
way to pass the allocation flags to alloc_percpu(), this patch delays the
allocation of stats using a worker thread.

v2-> tejun suggested following changes. Changed the patch accordingly.
	- move alloc_node location in structure
	- reduce the size of names of some of the fields
	- Reduce the scope of locking of alloc_list_lock
	- Simplified stat_alloc_fn() by allocating stats for all
	  policies in one go and then assigning these to a group.

v3 -> Andrew suggested to put some comments in the code. Also raised
      concerns about trying to allocate infinitely in case of allocation
      failure. I have changed the logic to sleep for 10ms before retrying.
      That should take care of non-preemptible UP kernels.

v4 -> Tejun had more suggestions.
	- drop list_for_each_entry_all()
	- instead of msleep() use queue_delayed_work()
	- Some cleanups realted to more compact coding.

v5-> tejun suggested more cleanups leading to more compact code.

tj: - Relocated pcpu_stats into blkio_stat_alloc_fn().
    - Minor comment update.
    - This also fixes suspicious RCU usage warning caused by invoking
      cgroup_path() from blkg_alloc() without holding RCU read lock.
      Now that blkg_alloc() doesn't require sleepable context, RCU
      read lock from blkg_lookup_create() is maintained throughout
      blkg_alloc().

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-03-20 12:45:37 +01:00
Linus Torvalds
f1cbd03f5e Merge branch 'for-linus' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
 "Been sitting on this for a while, but lets get this out the door.
  This fixes various important bugs for 3.3 final, along with a few more
  trivial ones.  Please pull!"

* 'for-linus' of git://git.kernel.dk/linux-block:
  block: fix ioc leak in put_io_context
  block, sx8: fix pointer math issue getting fw version
  Block: use a freezable workqueue for disk-event polling
  drivers/block/DAC960: fix -Wuninitialized warning
  drivers/block/DAC960: fix DAC960_V2_IOCTL_Opcode_T -Wenum-compare warning
  block: fix __blkdev_get and add_disk race condition
  block: Fix setting bio flags in drivers (sd_dif/floppy)
  block: Fix NULL pointer dereference in sd_revalidate_disk
  block: exit_io_context() should call elevator_exit_icq_fn()
  block: simplify ioc_release_fn()
  block: replace icq->changed with icq->flags
2012-03-14 17:16:45 -07:00
Xiaotian Feng
ff8c1474cc block: fix ioc leak in put_io_context
When put_io_context is called, if ioc->icq_list is empty and refcount
is 1, kernel will not free the ioc.

This is caught by following kmemleak:

unreferenced object 0xffff880036349fe0 (size 216):
  comm "sh", pid 2137, jiffies 4294931140 (age 290579.412s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    01 00 01 00 ad 4e ad de ff ff ff ff 00 00 00 00  .....N..........
  backtrace:
    [<ffffffff8169f926>] kmemleak_alloc+0x26/0x50
    [<ffffffff81195a9c>] kmem_cache_alloc_node+0x1cc/0x2a0
    [<ffffffff81356b67>] create_io_context_slowpath+0x27/0x130
    [<ffffffff81356d2b>] get_task_io_context+0xbb/0xf0
    [<ffffffff81055f0e>] copy_process+0x188e/0x18b0
    [<ffffffff8105609b>] do_fork+0x11b/0x420
    [<ffffffff810247f8>] sys_clone+0x28/0x30
    [<ffffffff816d3373>] stub_clone+0x13/0x20
    [<ffffffffffffffff>] 0xffffffffffffffff

ioc should be freed if ioc->icq_list is empty.
Signed-off-by: Xiaotian Feng <dannyfeng@tencent.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-03-14 15:34:48 +01:00
Tejun Heo
671058fb2a block: make blk-throttle preserve the issuing task on delayed bios
Make blk-throttle call bio_associate_current() on bios being delayed
such that they get issued to block layer with the original io_context.
This allows stacking blk-throttle and cfq-iosched propio policies.
bios will always be issued with the correct ioc and blkcg whether it
gets delayed by blk-throttle or not.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-03-06 21:27:24 +01:00
Tejun Heo
4f85cb96d9 block: make block cgroup policies follow bio task association
Implement bio_blkio_cgroup() which returns the blkcg associated with
the bio if exists or %current's blkcg, and use it in blk-throttle and
cfq-iosched propio.  This makes both cgroup policies honor task
association for the bio instead of always assuming %current.

As nobody is using bio_set_task() yet, this doesn't introduce any
behavior change.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-03-06 21:27:24 +01:00
Tejun Heo
852c788f83 block: implement bio_associate_current()
IO scheduling and cgroup are tied to the issuing task via io_context
and cgroup of %current.  Unfortunately, there are cases where IOs need
to be routed via a different task which makes scheduling and cgroup
limit enforcement applied completely incorrectly.

For example, all bios delayed by blk-throttle end up being issued by a
delayed work item and get assigned the io_context of the worker task
which happens to serve the work item and dumped to the default block
cgroup.  This is double confusing as bios which aren't delayed end up
in the correct cgroup and makes using blk-throttle and cfq propio
together impossible.

Any code which punts IO issuing to another task is affected which is
getting more and more common (e.g. btrfs).  As both io_context and
cgroup are firmly tied to task including userland visible APIs to
manipulate them, it makes a lot of sense to match up tasks to bios.

This patch implements bio_associate_current() which associates the
specified bio with %current.  The bio will record the associated ioc
and blkcg at that point and block layer will use the recorded ones
regardless of which task actually ends up issuing the bio.  bio
release puts the associated ioc and blkcg.

It grabs and remembers ioc and blkcg instead of the task itself
because task may already be dead by the time the bio is issued making
ioc and blkcg inaccessible and those are all block layer cares about.

elevator_set_req_fn() is updated such that the bio elvdata is being
allocated for is available to the elevator.

This doesn't update block cgroup policies yet.  Further patches will
implement the support.

-v2: #ifdef CONFIG_BLK_CGROUP added around bio->bi_ioc dereference in
     rq_ioc() to fix build breakage.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Kent Overstreet <koverstreet@google.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-03-06 21:27:24 +01:00
Tejun Heo
f6e8d01bee block: add io_context->active_ref
Currently ioc->nr_tasks is used to decide two things - whether an ioc
is done issuing IOs and whether it's shared by multiple tasks.  This
patch separate out the first into ioc->active_ref, which is acquired
and released using {get|put}_io_context_active() respectively.

This will be used to associate bio's with a given task.  This patch
doesn't introduce any visible behavior change.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-03-06 21:27:24 +01:00
Tejun Heo
24acfc34fb block: interface update for ioc/icq creation functions
Make the following interface updates to prepare for future ioc related
changes.

* create_io_context() returning ioc only works for %current because it
  doesn't increment ref on the ioc.  Drop @task parameter from it and
  always assume %current.

* Make create_io_context_slowpath() return 0 or -errno and rename it
  to create_task_io_context().

* Make ioc_create_icq() take @ioc as parameter instead of assuming
  that of %current.  The caller, get_request(), is updated to create
  ioc explicitly and then pass it into ioc_create_icq().

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-03-06 21:27:24 +01:00
Tejun Heo
b679281a64 block: restructure get_request()
get_request() is structured a bit unusually in that failure path is
inlined in the usual flow with goto labels atop and inside it.
Relocate the error path to the end of the function.

This is to prepare for icq handling changes in get_request() and
doesn't introduce any behavior change.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-03-06 21:27:24 +01:00
Tejun Heo
c875f4d025 blkcg: drop unnecessary RCU locking
Now that blkg additions / removals are always done under both q and
blkcg locks, the only places RCU locking is necessary are
blkg_lookup[_create]() for lookup w/o blkcg lock.  This patch drops
unncessary RCU locking replacing it with plain blkcg locking as
necessary.

* blkiocg_pre_destroy() already perform proper locking and don't need
  RCU.  Dropped.

* blkio_read_blkg_stats() now uses blkcg->lock instead of RCU read
  lock.  This isn't a hot path.

* Now unnecessary synchronize_rcu() from queue exit paths removed.
  This makes q->nr_blkgs unnecessary.  Dropped.

* RCU annotation on blkg->q removed.

-v2: Vivek pointed out that blkg_lookup_create() still needs to be
     called under rcu_read_lock().  Updated.

-v3: After the update, stats_lock locking in blkio_read_blkg_stats()
     shouldn't be using _irq variant as it otherwise ends up enabling
     irq while blkcg->lock is locked.  Fixed.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-03-06 21:27:24 +01:00
Tejun Heo
9f13ef678e blkcg: use double locking instead of RCU for blkg synchronization
blkgs are chained from both blkcgs and request_queues and thus
subjected to two locks - blkcg->lock and q->queue_lock.  As both blkcg
and q can go away anytime, locking during removal is tricky.  It's
currently solved by wrapping removal inside RCU, which makes the
synchronization complex.  There are three locks to worry about - the
outer RCU, q lock and blkcg lock, and it leads to nasty subtle
complications like conditional synchronize_rcu() on queue exit paths.

For all other paths, blkcg lock is naturally nested inside q lock and
the only exception is blkcg removal path, which is a very cold path
and can be implemented as clumsy but conceptually-simple reverse
double lock dancing.

This patch updates blkg removal path such that blkgs are removed while
holding both q and blkcg locks, which is trivial for request queue
exit path - blkg_destroy_all().  The blkcg removal path,
blkiocg_pre_destroy(), implements reverse double lock dancing
essentially identical to ioc_release_fn().

This simplifies blkg locking - no half-dead blkgs to worry about.  Now
unnecessary RCU annotations will be removed by the next patch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-03-06 21:27:24 +01:00
Tejun Heo
e8989fae38 blkcg: unify blkg's for blkcg policies
Currently, blkg is per cgroup-queue-policy combination.  This is
unnatural and leads to various convolutions in partially used
duplicate fields in blkg, config / stat access, and general management
of blkgs.

This patch make blkg's per cgroup-queue and let them serve all
policies.  blkgs are now created and destroyed by blkcg core proper.
This will allow further consolidation of common management logic into
blkcg core and API with better defined semantics and layering.

As a transitional step to untangle blkg management, elvswitch and
policy [de]registration, all blkgs except the root blkg are being shot
down during elvswitch and bypass.  This patch adds blkg_root_update()
to update root blkg in place on policy change.  This is hacky and racy
but should be good enough as interim step until we get locking
simplified and switch over to proper in-place update for all blkgs.

-v2: Root blkgs need to be updated on elvswitch too and blkg_alloc()
     comment wasn't updated according to the function change.  Fixed.
     Both pointed out by Vivek.

-v3: v2 updated blkg_destroy_all() to invoke update_root_blkg_pd() for
     all policies.  This freed root pd during elvswitch before the
     last queue finished exiting and led to oops.  Directly invoke
     update_root_blkg_pd() only on BLKIO_POLICY_PROP from
     cfq_exit_queue().  This also is closer to what will be done with
     proper in-place blkg update.  Reported by Vivek.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-03-06 21:27:23 +01:00
Tejun Heo
03aa264ac1 blkcg: let blkcg core manage per-queue blkg list and counter
With the previous patch to move blkg list heads and counters to
request_queue and blkg, logic to manage them in both policies are
almost identical and can be moved to blkcg core.

This patch moves blkg link logic into blkg_lookup_create(), implements
common blkg unlink code in blkg_destroy(), and updates
blkg_destory_all() so that it's policy specific and can skip root
group.  The updated blkg_destroy_all() is now used to both clear queue
for bypassing and elv switching, and release all blkgs on q exit.

This patch introduces a race window where policy [de]registration may
race against queue blkg clearing.  This can only be a problem on cfq
unload and shouldn't be a real problem in practice (and we have many
other places where this race already exists).  Future patches will
remove these unlikely races.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-03-06 21:27:23 +01:00
Tejun Heo
4eef304998 blkcg: move per-queue blkg list heads and counters to queue and blkg
Currently, specific policy implementations are responsible for
maintaining list and number of blkgs.  This duplicates code
unnecessarily, and hinders factoring common code and providing blkcg
API with better defined semantics.

After this patch, request_queue hosts list heads and counters and blkg
has list nodes for both policies.  This patch only relocates the
necessary fields and the next patch will actually move management code
into blkcg core.

Note that request_queue->blkg_list[] and ->nr_blkgs[] are hardcoded to
have 2 elements.  This is to avoid include dependency and will be
removed by the next patch.

This patch doesn't introduce any behavior change.

-v2: Now unnecessary conditional on CONFIG_BLK_CGROUP_MODULE removed
     as pointed out by Vivek.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-03-06 21:27:23 +01:00
Tejun Heo
c1768268f9 blkcg: don't use blkg->plid in stat related functions
blkg is scheduled to be unified for all policies and thus there won't
be one-to-one mapping from blkg to policy.  Update stat related
functions to take explicit @pol or @plid arguments and not use
blkg->plid.

This is painful for now but most of specific stat interface functions
will be replaced with a handful of generic helpers.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-03-06 21:27:23 +01:00
Tejun Heo
549d3aa872 blkcg: make blkg->pd an array and move configuration and stats into it
To prepare for unifying blkgs for different policies, make blkg->pd an
array with BLKIO_NR_POLICIES elements and move blkg->conf, ->stats,
and ->stats_cpu into blkg_policy_data.

This patch doesn't introduce any functional difference.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-03-06 21:27:23 +01:00
Tejun Heo
1adaf3dde3 blkcg: move refcnt to blkcg core
Currently, blkcg policy implementations manage blkg refcnt duplicating
mostly identical code in both policies.  This patch moves refcnt to
blkg and let blkcg core handle refcnt and freeing of blkgs.

* cfq blkgs now also get freed via RCU.

* cfq blkgs lose RB_EMPTY_ROOT() sanity check on blkg free.  If
  necessary, we can add blkio_exit_group_fn() to resurrect this.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-03-06 21:27:23 +01:00
Tejun Heo
0381411e4b blkcg: let blkcg core handle policy private data allocation
Currently, blkg's are embedded in private data blkcg policy private
data structure and thus allocated and freed by policies.  This leads
to duplicate codes in policies, hinders implementing common part in
blkcg core with strong semantics, and forces duplicate blkg's for the
same cgroup-q association.

This patch introduces struct blkg_policy_data which is a separate data
structure chained from blkg.  Policies specifies the amount of private
data it needs in its blkio_policy_type->pdata_size and blkcg core
takes care of allocating them along with blkg which can be accessed
using blkg_to_pdata().  blkg can be determined from pdata using
pdata_to_blkg().  blkio_alloc_group_fn() method is accordingly updated
to blkio_init_group_fn().

For consistency, tg_of_blkg() and cfqg_of_blkg() are replaced with
blkg_to_tg() and blkg_to_cfqg() respectively, and functions to map in
the reverse direction are added.

Except that policy specific data now lives in a separate data
structure from blkg, this patch doesn't introduce any functional
difference.

This will be used to unify blkg's for different policies.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-03-06 21:27:23 +01:00
Tejun Heo
923adde1be blkcg: clear all request_queues on blkcg policy [un]registrations
Keep track of all request_queues which have blkcg initialized and turn
on bypass and invoke blkcg_clear_queue() on all before making changes
to blkcg policies.

This is to prepare for moving blkg management into blkcg core.  Note
that this uses more brute force than necessary.  Finer grained shoot
down will be implemented later and given that policy [un]registration
almost never happens on running systems (blk-throtl can't be built as
a module and cfq usually is the builtin default iosched), this
shouldn't be a problem for the time being.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-03-06 21:27:23 +01:00
Tejun Heo
5efd611351 blkcg: add blkcg_{init|drain|exit}_queue()
Currently block core calls directly into blk-throttle for init, drain
and exit.  This patch adds blkcg_{init|drain|exit}_queue() which wraps
the blk-throttle functions.  This is to give more control and
visiblity to blkcg core layer for proper layering.  Further patches
will add logic common to blkcg policies to the functions.

While at it, collapse blk_throtl_release() into blk_throtl_exit().
There's no reason to keep them separate.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-03-06 21:27:23 +01:00
Tejun Heo
7ee9c56205 blkcg: let blkio_group point to blkio_cgroup directly
Currently, blkg points to the associated blkcg via its css_id.  This
unnecessarily complicates dereferencing blkcg.  Let blkg hold a
reference to the associated blkcg and point directly to it and disable
css_id on blkio_subsys.

This change requires splitting blkiocg_destroy() into
blkiocg_pre_destroy() and blkiocg_destroy() so that all blkg's can be
destroyed and all the blkcg references held by them dropped during
cgroup removal.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-03-06 21:27:23 +01:00
Vivek Goyal
92616b5b3a blkcg: skip blkg printing if q isn't associated with disk
blk-cgroup printing code currently assumes that there is a device/disk
associated with every queue in the system, but modules like floppy,
can instantiate request queues without registering disk which can lead
to oops.

Skip the queue/blkg which don't have dev/disk associated with them.

-tj: Factored out backing_dev_info check into blkg_dev_name().

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-03-06 21:27:22 +01:00
Tejun Heo
7a4dd281ec blkcg: kill the mind-bending blkg->dev
blkg->dev is dev_t recording the device number of the block device for
the associated request_queue.  It is used to identify the associated
block device when printing out configuration or stats.

This is redundant to begin with.  A blkg is an association between a
cgroup and a request_queue and it of course is possible to reach
request_queue from blkg and synchronization conventions are in place
for safe q dereferencing, so this shouldn't be necessary from the
beginning.  Furthermore, it's initialized by sscanf()ing the device
name of backing_dev_info.  The mind boggles.

Anyways, if blkg is visible under rcu lock, we *know* that the
associated request_queue hasn't gone away yet and its bdi is
registered and alive - blkg can't be created for request_queue which
hasn't been fully initialized and it can't go away before blkg is
removed.

Let stat and conf read functions get device name from
blkg->q->backing_dev_info.dev and pass it down to printing functions
and remove blkg->dev.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-03-06 21:27:22 +01:00
Tejun Heo
4bfd482e73 blkcg: kill blkio_policy_node
Now that blkcg configuration lives in blkg's, blkio_policy_node is no
longer necessary.  Kill it.

blkio_policy_parse_and_set() now fails if invoked for missing device
and functions to print out configurations are updated to print from
blkg's.

cftype_blkg_same_policy() is dropped along with other policy functions
for consistency.  Its one line is open coded in the only user -
blkio_read_blkg_stats().

-v2: Update to reflect the retry-on-bypass logic change of the
     previous patch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-03-06 21:27:22 +01:00
Tejun Heo
e56da7e287 blkcg: don't allow or retain configuration of missing devices
blkcg is very peculiar in that it allows setting and remembering
configurations for non-existent devices by maintaining separate data
structures for configuration.

This behavior is completely out of the usual norms and outright
confusing; furthermore, it uses dev_t number to match the
configuration to devices, which is unpredictable to begin with and
becomes completely unuseable if EXT_DEVT is fully used.

It is wholely unnecessary - we already have fully functional userland
mechanism to program devices being hotplugged which has full access to
device identification, connection topology and filesystem information.

Add a new struct blkio_group_conf which contains all blkcg
configurations to blkio_group and let blkio_group, which can be
created iff the associated device exists and is removed when the
associated device goes away, carry all configurations.

Note that, after this patch, all newly created blkg's will always have
the default configuration (unlimited for throttling and blkcg's weight
for propio).

This patch makes blkio_policy_node meaningless but doesn't remove it.
The next patch will.

-v2: Updated to retry after short sleep if blkg lookup/creation failed
     due to the queue being temporarily bypassed as indicated by
     -EBUSY return.  Pointed out by Vivek.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-03-06 21:27:22 +01:00
Tejun Heo
cd1604fab4 blkcg: factor out blkio_group creation
Currently both blk-throttle and cfq-iosched implement their own
blkio_group creation code in throtl_get_tg() and cfq_get_cfqg().  This
patch factors out the common code into blkg_lookup_create(), which
returns ERR_PTR value so that transitional failures due to queue
bypass can be distinguished from other failures.

* New plkio_policy_ops methods blkio_alloc_group_fn() and
  blkio_link_group_fn added.  Both are transitional and will be
  removed once the blkg management code is fully moved into
  blk-cgroup.c.

* blkio_alloc_group_fn() allocates policy-specific blkg which is
  usually a larger data structure with blkg as the first entry and
  intiailizes it.  Note that initialization of blkg proper, including
  percpu stats, is responsibility of blk-cgroup proper.

  Note that default config (weight, bps...) initialization is done
  from this method; otherwise, we end up violating locking order
  between blkcg and q locks via blkcg_get_CONF() functions.

* blkio_link_group_fn() is called under queue_lock and responsible for
  linking the blkg to the queue.  blkcg side is handled by blk-cgroup
  proper.

* The common blkg creation function is named blkg_lookup_create() and
  blkiocg_lookup_group() is renamed to blkg_lookup() for consistency.
  Also, throtl / cfq related functions are similarly [re]named for
  consistency.

This simplifies blkcg policy implementations and enables further
cleanup.

-v2: Vivek noticed that blkg_lookup_create() incorrectly tested
     blk_queue_dead() instead of blk_queue_bypass() leading a user of
     the function ending up creating a new blkg on bypassing queue.
     This is a bug introduced while relocating bypass patches before
     this one.  Fixed.

-v3: ERR_PTR patch folded into this one.  @for_root added to
     blkg_lookup_create() to allow creating root group on a bypassed
     queue during elevator switch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-03-06 21:27:22 +01:00
Tejun Heo
f51b802c17 blkcg: use the usual get blkg path for root blkio_group
For root blkg, blk_throtl_init() was using throtl_alloc_tg()
explicitly and cfq_init_queue() was manually initializing embedded
cfqd->root_group, adding unnecessarily different code paths to blkg
handling.

Make both use the usual blkio_group get functions - throtl_get_tg()
and cfq_get_cfqg() - for the root blkio_group too.  Note that
blk_throtl_init() callsite is pushed downwards in
blk_alloc_queue_node() so that @q is sufficiently initialized for
throtl_get_tg().

This simplifies root blkg handling noticeably for cfq and will allow
further modularization of blkcg API.

-v2: Vivek pointed out that using cfq_get_cfqg() won't work if
     CONFIG_CFQ_GROUP_IOSCHED is disabled.  Fix it by factoring out
     initialization of base part of cfqg into cfq_init_cfqg_base() and
     alloc/init/free explicitly if !CONFIG_CFQ_GROUP_IOSCHED.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-03-06 21:27:22 +01:00
Tejun Heo
035d10b2fa blkcg: add blkio_policy[] array and allow one policy per policy ID
Block cgroup policies are maintained in a linked list and,
theoretically, multiple policies sharing the same policy ID are
allowed.

This patch temporarily restricts one policy per plid and adds
blkio_policy[] array which indexes registered policy types by plid.
Both the restriction and blkio_policy[] array are transitional and
will be removed once API cleanup is complete.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-03-06 21:27:22 +01:00
Tejun Heo
ca32aefc7f blkcg: use q and plid instead of opaque void * for blkio_group association
blkgio_group is association between a block cgroup and a queue for a
given policy.  Using opaque void * for association makes things
confusing and hinders factoring of common code.  Use request_queue *
and, if necessary, policy id instead.

This will help block cgroup API cleanup.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-03-06 21:27:22 +01:00
Tejun Heo
0a5a7d0e32 blkcg: update blkg get functions take blkio_cgroup as parameter
In both blkg get functions - throtl_get_tg() and cfq_get_cfqg(),
instead of obtaining blkcg of %current explicitly, let the caller
specify the blkcg to use as parameter and make both functions hold on
to the blkcg.

This is part of block cgroup interface cleanup and will help making
blkcg API more modular.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-03-06 21:27:22 +01:00
Tejun Heo
2a7f124414 blkcg: move rcu_read_lock() outside of blkio_group get functions
rcu_read_lock() in throtl_get_tb() and cfq_get_cfqg() holds onto
@blkcg while looking up blkg.  For API cleanup, the next patch will
make the caller responsible for determining @blkcg to look blkg from
and let them specify it as a parameter.  Move rcu read locking out to
the callers to prepare for the change.

-v2: Originally this patch was described as a fix for RCU read locking
     bug around @blkg, which Vivek pointed out to be incorrect.  It
     was from misunderstanding the role of rcu locking as protecting
     @blkg not @blkcg.  Patch description updated.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-03-06 21:27:22 +01:00
Tejun Heo
72e06c2551 blkcg: shoot down blkio_groups on elevator switch
Elevator switch may involve changes to blkcg policies.  Implement
shoot down of blkio_groups.

Combined with the previous bypass updates, the end goal is updating
blkcg core such that it can ensure that blkcg's being affected become
quiescent and don't have any per-blkg data hanging around before
commencing any policy updates.  Until queues are made aware of the
policies that applies to them, as an interim step, all per-policy blkg
data will be shot down.

* blk-throtl doesn't need this change as it can't be disabled for a
  live queue; however, update it anyway as the scheduled blkg
  unification requires this behavior change.  This means that
  blk-throtl configuration will be unnecessarily lost over elevator
  switch.  This oddity will be removed after blkcg learns to associate
  individual policies with request_queues.

* blk-throtl dosen't shoot down root_tg.  This is to ease transition.
  Unified blkg will always have persistent root group and not shooting
  down root_tg for now eases transition to that point by avoiding
  having to update td->root_tg and is safe as blk-throtl can never be
  disabled

-v2: Vivek pointed out that group list is not guaranteed to be empty
     on return from clear function if it raced cgroup removal and
     lost.  Fix it by waiting a bit and retrying.  This kludge will
     soon be removed once locking is updated such that blkg is never
     in limbo state between blkcg and request_queue locks.

     blk-throtl no longer shoots down root_tg to avoid breaking
     td->root_tg.

     Also, Nest queue_lock inside blkio_list_lock not the other way
     around to avoid introduce possible deadlock via blkcg lock.

-v3: blkcg_clear_queue() repositioned and renamed to
     blkg_destroy_all() to increase consistency with later changes.
     cfq_clear_queue() updated to check q->elevator before
     dereferencing it to avoid NULL dereference on not fully
     initialized queues (used by later change).

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-03-06 21:27:22 +01:00
Tejun Heo
6ecf23afab block: extend queue bypassing to cover blkcg policies
Extend queue bypassing such that dying queue is always bypassing and
blk-throttle is drained on bypass.  With blkcg policies updated to
test blk_queue_bypass() instead of blk_queue_dead(), this ensures that
no bio or request is held by or going through blkcg policies on a
bypassing queue.

This will be used to implement blkg cleanup on elevator switches and
policy changes.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-03-06 21:27:22 +01:00
Tejun Heo
d732580b4e block: implement blk_queue_bypass_start/end()
Rename and extend elv_queisce_start/end() to
blk_queue_bypass_start/end() which are exported and supports nesting
via @q->bypass_depth.  Also add blk_queue_bypass() to test bypass
state.

This will be further extended and used for blkio_group management.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-03-06 21:27:21 +01:00
Tejun Heo
b2fab5acd2 elevator: make elevator_init_fn() return 0/-errno
elevator_ops->elevator_init_fn() has a weird return value.  It returns
a void * which the caller should assign to q->elevator->elevator_data
and %NULL return denotes init failure.

Update such that it returns integer 0/-errno and sets elevator_data
directly as necessary.

This makes the interface more conventional and eases further cleanup.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-03-06 21:27:21 +01:00
Tejun Heo
5a5bafdc39 elevator: clear auxiliary data earlier during elevator switch
Elevator switch tries hard to keep as much as context until new
elevator is ready so that it can revert to the original state if
initializing the new elevator fails for some reason.  Unfortunately,
with more auxiliary contexts to manage, this makes elevator init and
exit paths too complex and fragile.

This patch makes elevator_switch() unregister the current elevator and
flush icq's before start initializing the new one.  As we still keep
the old elevator itself, the only difference is that we lose icq's on
rare occassions of switching failure, which isn't critical at all.

Note that this makes explicit elevator parameter to
elevator_init_queue() and __elv_register_queue() unnecessary as they
always can use the current elevator.

This patch enables block cgroup cleanups.

-v2: blk_add_trace_msg() prints elevator name from @new_e instead of
     @e->type as the local variable no longer exists.  This caused
     build failure on CONFIG_BLK_DEV_IO_TRACE.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-03-06 21:27:21 +01:00
Tejun Heo
b95ada558c cfq: don't register propio policy if !CONFIG_CFQ_GROUP_IOSCHED
cfq has been registering zeroed blkio_poilcy_cfq if CFQ_GROUP_IOSCHED
is disabled.  This fortunately doesn't collide with blk-throtl as
BLKIO_POLICY_PROP is zero but is unnecessary and risky.  Just don't
register it if not enabled.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-03-06 21:27:21 +01:00
Tejun Heo
32e380aedc blkcg: make CONFIG_BLK_CGROUP bool
Block cgroup core can be built as module; however, it isn't too useful
as blk-throttle can only be built-in and cfq-iosched is usually the
default built-in scheduler.  Scheduled blkcg cleanup requires calling
into blkcg from block core.  To simplify that, disallow building blkcg
as module by making CONFIG_BLK_CGROUP bool.

If building blkcg core as module really matters, which I doubt, we can
revisit it after blkcg API cleanup.

-v2: Vivek pointed out that IOSCHED_CFQ was incorrectly updated to
     depend on BLK_CGROUP.  Fixed.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-03-06 21:27:21 +01:00
Tejun Heo
b855b04a0b block: blk-throttle should be drained regardless of q->elevator
Currently, blk_cleanup_queue() doesn't call elv_drain_elevator() if
q->elevator doesn't exist; however, bio based drivers don't have
elevator initialized but can still use blk-throttle.  This patch moves
q->elevator test inside blk_drain_queue() such that only
elv_drain_elevator() is skipped if !q->elevator.

-v2: loop can have registered queue which has NULL request_fn.  Make
     sure we don't call into __blk_run_queue() in such cases.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Vivek Goyal <vgoyal@redhat.com>

Fold in bug fix from Vivek.

Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-03-06 21:24:55 +01:00
Alan Stern
62d3c5439c Block: use a freezable workqueue for disk-event polling
This patch (as1519) fixes a bug in the block layer's disk-events
polling.  The polling is done by a work routine queued on the
system_nrt_wq workqueue.  Since that workqueue isn't freezable, the
polling continues even in the middle of a system sleep transition.

Obviously, polling a suspended drive for media changes and such isn't
a good thing to do; in the case of USB mass-storage devices it can
lead to real problems requiring device resets and even re-enumeration.

The patch fixes things by creating a new system-wide, non-reentrant,
freezable workqueue and using it for disk-events polling.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: <stable@kernel.org>
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-03-02 10:51:00 +01:00
Stanislaw Gruszka
9f53d2fe81 block: fix __blkdev_get and add_disk race condition
The following situation might occur:

__blkdev_get:			add_disk:

				register_disk()
get_gendisk()

disk_block_events()
	disk->ev == NULL

				disk_add_events()

__disk_unblock_events()
	disk->ev != NULL
	--ev->block

Then we unblock events, when they are suppose to be blocked. This can
trigger events related block/genhd.c warnings, but also can crash in
sd_check_events() or other places.

I'm able to reproduce crashes with the following scripts (with
connected usb dongle as sdb disk).

<snip>
DEV=/dev/sdb
ENABLE=/sys/bus/usb/devices/1-2/bConfigurationValue

function stop_me()
{
	for i in `jobs -p` ; do kill $i 2> /dev/null ; done
	exit
}

trap stop_me SIGHUP SIGINT SIGTERM

for ((i = 0; i < 10; i++)) ; do
	while true; do fdisk -l $DEV  2>&1 > /dev/null ; done &
done

while true ; do
echo 1 > $ENABLE
sleep 1
echo 0 > $ENABLE
done
</snip>

I use the script to verify patch fixing oops in sd_revalidate_disk
http://marc.info/?l=linux-scsi&m=132935572512352&w=2
Without Jun'ichi Nomura patch titled "Fix NULL pointer dereference in
sd_revalidate_disk" or this one, script easily crash kernel within
a few seconds. With both patches applied I do not observe crash.
Unfortunately after some time (dozen of minutes), script will hung in:

[ 1563.906432]  [<c08354f5>] schedule_timeout_uninterruptible+0x15/0x20
[ 1563.906437]  [<c04532d5>] msleep+0x15/0x20
[ 1563.906443]  [<c05d60b2>] blk_drain_queue+0x32/0xd0
[ 1563.906447]  [<c05d6e00>] blk_cleanup_queue+0xd0/0x170
[ 1563.906454]  [<c06d278f>] scsi_free_queue+0x3f/0x60
[ 1563.906459]  [<c06d7e6e>] __scsi_remove_device+0x6e/0xb0
[ 1563.906463]  [<c06d4aff>] scsi_forget_host+0x4f/0x60
[ 1563.906468]  [<c06cd84a>] scsi_remove_host+0x5a/0xf0
[ 1563.906482]  [<f7f030fb>] quiesce_and_remove_host+0x5b/0xa0 [usb_storage]
[ 1563.906490]  [<f7f03203>] usb_stor_disconnect+0x13/0x20 [usb_storage]

Anyway I think this patch is some step forward.

As drawback, I do not teardown on sysfs file create error, because I do
not know how to nullify disk->ev (since it can be used). However add_disk
error handling practically does not exist too, and things will work
without this sysfs file, except events will not be exported to user
space.

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: stable@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-03-02 10:44:17 +01:00
Jun'ichi Nomura
fe316bf2d5 block: Fix NULL pointer dereference in sd_revalidate_disk
Since 2.6.39 (1196f8b), when a driver returns -ENOMEDIUM for open(),
__blkdev_get() calls rescan_partitions() to remove
in-kernel partition structures and raise KOBJ_CHANGE uevent.

However it ends up calling driver's revalidate_disk without open
and could cause oops.

In the case of SCSI:

  process A                  process B
  ----------------------------------------------
  sys_open
    __blkdev_get
      sd_open
        returns -ENOMEDIUM
                             scsi_remove_device
                               <scsi_device torn down>
      rescan_partitions
        sd_revalidate_disk
          <oops>
Oopses are reported here:
http://marc.info/?l=linux-scsi&m=132388619710052

This patch separates the partition invalidation from rescan_partitions()
and use it for -ENOMEDIUM case.

Reported-by: Huajun Li <huajun.li.lee@gmail.com>
Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: stable@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-03-02 10:38:33 +01:00
Ingo Molnar
7e4d960993 Merge branch 'linus' into sched/core
Merge reason: we'll queue up dependent patches.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-01 10:26:43 +01:00
Anton Altaparmakov
97387e3baa LDM: Fix reassembly of extended VBLKs.
From: Ben Hutchings <ben@decadent.org.uk>

Extended VBLKs (those larger than the preset VBLK size) are divided
into fragments, each with its own VBLK header.  Our LDM implementation
generally assumes that each VBLK is contiguous in memory, so these
fragments must be assembled before further processing.

Currently the reassembly seems to be done quite wrongly - no VBLK
header is copied into the contiguous buffer, and the length of the
header is subtracted twice from each fragment.  Also the total
length of the reassembled VBLK is calculated incorrectly.

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Anton Altaparmakov <anton@tuxera.com>
2012-02-24 09:37:42 +00:00
Tejun Heo
621032ad6e block: exit_io_context() should call elevator_exit_icq_fn()
While updating locking, b2efa05265 "block, cfq: unlink
cfq_io_context's immediately" moved elevator_exit_icq_fn() invocation
from exit_io_context() to the final ioc put.  While this doesn't cause
catastrophic failure, it effectively removes task exit notification to
elevator and cause noticeable IO performance degradation with CFQ.

On task exit, CFQ used to immediately expire the slice if it was being
used by the exiting task as no more IO would be issued by the task;
however, after b2efa05265, the notification is lost and disk could sit
idle needlessly, leading to noticeable IO performance degradation for
certain workloads.

This patch renames ioc_exit_icq() to ioc_destroy_icq(), separates
elevator_exit_icq_fn() invocation into ioc_exit_icq() and invokes it
from exit_io_context().  ICQ_EXITED flag is added to avoid invoking
the callback more than once for the same icq.

Walking icq_list from ioc side and invoking elevator callback requires
reverse double locking.  This may be better implemented using RCU;
unfortunately, using RCU isn't trivial.  e.g. RCU protection would
need to cover request_queue and queue_lock switch on cleanup makes
grabbing queue_lock from RCU unsafe.  Reverse double locking should
do, at least for now.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-and-bisected-by: Shaohua Li <shli@kernel.org>
LKML-Reference: <CANejiEVzs=pUhQSTvUppkDcc2TNZyfohBRLygW5zFmXyk5A-xQ@mail.gmail.com>
Tested-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-02-15 09:45:53 +01:00
Tejun Heo
2274b029f6 block: simplify ioc_release_fn()
Reverse double lock dancing in ioc_release_fn() can be simplified by
just using trylock on the queue_lock and back out from ioc lock on
trylock failure.  Simplify it.

Signed-off-by: Tejun Heo <tj@kernel.org>
Tested-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-02-15 09:45:52 +01:00
Tejun Heo
d705ae6b13 block: replace icq->changed with icq->flags
icq->changed was used for ICQ_*_CHANGED bits.  Rename it to flags and
access it under ioc->lock instead of using atomic bitops.
ioc_get_changed() is added so that the changed part can be fetched and
cleared as before.

icq->flags will be used to carry other flags.

Signed-off-by: Tejun Heo <tj@kernel.org>
Tested-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-02-15 09:45:49 +01:00
Tejun Heo
d8c66c5d59 block: fix lockdep warning on io_context release put_io_context()
11a3122f6c "block: strip out locking optimization in put_io_context()"
removed ioc_lock depth lockdep annoation along with locking
optimization; however, while recursing from put_io_context() is no
longer possible, ioc_release_fn() may still end up putting the last
reference of another ioc through elevator, which wlil grab ioc->lock
triggering spurious (as the ioc is always different one) A-A deadlock
warning.

As this can only happen one time from ioc_release_fn(), using non-zero
subclass from ioc_release_fn() is enough.  Use subclass 1.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-02-11 12:37:25 +01:00
Stanislaw Gruszka
37b40adf2d bsg: fix sysfs link remove warning
We create "bsg" link if q->kobj.sd is not NULL, so remove it only
when the same condition is true.

Fixes:

WARNING: at fs/sysfs/inode.c:323 sysfs_hash_and_remove+0x2b/0x77()
sysfs: can not remove 'bsg', no directory
Call Trace:
  [<c0429683>] warn_slowpath_common+0x6a/0x7f
  [<c0537a68>] ? sysfs_hash_and_remove+0x2b/0x77
  [<c042970b>] warn_slowpath_fmt+0x2b/0x2f
  [<c0537a68>] sysfs_hash_and_remove+0x2b/0x77
  [<c053969a>] sysfs_remove_link+0x20/0x23
  [<c05d88f1>] bsg_unregister_queue+0x40/0x6d
  [<c0692263>] __scsi_remove_device+0x31/0x9d
  [<c069149f>] scsi_forget_host+0x41/0x52
  [<c0689fa9>] scsi_remove_host+0x71/0xe0
  [<f7de5945>] quiesce_and_remove_host+0x51/0x83 [usb_storage]
  [<f7de5a1e>] usb_stor_disconnect+0x18/0x22 [usb_storage]
  [<c06c29de>] usb_unbind_interface+0x4e/0x109
  [<c067a80f>] __device_release_driver+0x6b/0xa6
  [<c067a861>] device_release_driver+0x17/0x22
  [<c067a46a>] bus_remove_device+0xd6/0xe6
  [<c06785e2>] device_del+0xf2/0x137
  [<c06c101f>] usb_disable_device+0x94/0x1a0

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-02-08 20:02:03 +01:00
Tejun Heo
07c2bd3735 block: don't call elevator callbacks for plug merges
Plug merge calls two elevator callbacks outside queue lock -
elevator_allow_merge_fn() and elevator_bio_merged_fn().  Although
attempt_plug_merge() suggests that elevator is guaranteed to be there
through the existing request on the plug list, nothing prevents plug
merge from calling into dying or initializing elevator.

For regular merges, bypass ensures elvpriv count to reach zero, which
in turn prevents merges as all !ELVPRIV requests get REQ_SOFTBARRIER
from forced back insertion.  Plug merge doesn't check ELVPRIV, and, as
the requests haven't gone through elevator insertion yet, it doesn't
have SOFTBARRIER set allowing merges on a bypassed queue.

This, for example, leads to the following crash during elevator
switch.

 BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
 IP: [<ffffffff813b34e9>] cfq_allow_merge+0x49/0xa0
 PGD 112cbc067 PUD 115d5c067 PMD 0
 Oops: 0000 [#1] PREEMPT SMP
 CPU 1
 Modules linked in: deadline_iosched

 Pid: 819, comm: dd Not tainted 3.3.0-rc2-work+ #76 Bochs Bochs
 RIP: 0010:[<ffffffff813b34e9>]  [<ffffffff813b34e9>] cfq_allow_merge+0x49/0xa0
 RSP: 0018:ffff8801143a38f8  EFLAGS: 00010297
 RAX: 0000000000000000 RBX: ffff88011817ce28 RCX: ffff880116eb6cc0
 RDX: 0000000000000000 RSI: ffff880118056e20 RDI: ffff8801199512f8
 RBP: ffff8801143a3908 R08: 0000000000000000 R09: 0000000000000000
 R10: 0000000000000001 R11: 0000000000000000 R12: ffff880118195708
 R13: ffff880118052aa0 R14: ffff8801143a3d50 R15: ffff880118195708
 FS:  00007f19f82cb700(0000) GS:ffff88011fc80000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
 CR2: 0000000000000008 CR3: 0000000112c6a000 CR4: 00000000000006e0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
 Process dd (pid: 819, threadinfo ffff8801143a2000, task ffff880116eb6cc0)
 Stack:
  ffff88011817ce28 ffff880118195708 ffff8801143a3928 ffffffff81391bba
  ffff88011817ce28 ffff880118195708 ffff8801143a3948 ffffffff81391bf1
  ffff88011817ce28 0000000000000000 ffff8801143a39a8 ffffffff81398e3e
 Call Trace:
  [<ffffffff81391bba>] elv_rq_merge_ok+0x4a/0x60
  [<ffffffff81391bf1>] elv_try_merge+0x21/0x40
  [<ffffffff81398e3e>] blk_queue_bio+0x8e/0x390
  [<ffffffff81396a5a>] generic_make_request+0xca/0x100
  [<ffffffff81396b04>] submit_bio+0x74/0x100
  [<ffffffff811d45c2>] __blockdev_direct_IO+0x1ce2/0x3450
  [<ffffffff811d0dc7>] blkdev_direct_IO+0x57/0x60
  [<ffffffff811460b5>] generic_file_aio_read+0x6d5/0x760
  [<ffffffff811986b2>] do_sync_read+0xe2/0x120
  [<ffffffff81199345>] vfs_read+0xc5/0x180
  [<ffffffff81199501>] sys_read+0x51/0x90
  [<ffffffff81aeac12>] system_call_fastpath+0x16/0x1b

There are multiple ways to fix this including making plug merge check
ELVPRIV; however,

* Calling into elevator outside queue lock is confusing and
  error-prone.

* Requests on plug list aren't known to the elevator.  They aren't on
  the elevator yet, so there's no elevator specific state to update.

* Given the nature of plug merges - collecting bio's for the same
  purpose from the same issuer - elevator specific restrictions aren't
  applicable.

So, simply don't call into elevator methods from plug merge by moving
elv_bio_merged() from bio_attempt_*_merge() to blk_queue_bio(), and
using blk_try_merge() in attempt_plug_merge().

This is based on Jens' patch to skip elevator_allow_merge_fn() from
plug merge.

Note that this makes per-cgroup merged stats skip plug merging.

Signed-off-by: Tejun Heo <tj@kernel.org>
LKML-Reference: <4F16F3CA.90904@kernel.dk>
Original-patch-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-02-08 09:19:42 +01:00
Tejun Heo
050c8ea80e block: separate out blk_rq_merge_ok() and blk_try_merge() from elevator functions
blk_rq_merge_ok() is the elevator-neutral part of merge eligibility
test.  blk_try_merge() determines merge direction and expects the
caller to have tested elv_rq_merge_ok() previously.

elv_rq_merge_ok() now wraps blk_rq_merge_ok() and then calls
elv_iosched_allow_merge().  elv_try_merge() is removed and the two
callers are updated to call elv_rq_merge_ok() explicitly followed by
blk_try_merge().  While at it, make rq_merge_ok() functions return
bool.

This is to prepare for plug merge update and doesn't introduce any
behavior change.

This is based on Jens' patch to skip elevator_allow_merge_fn() from
plug merge.

Signed-off-by: Tejun Heo <tj@kernel.org>
LKML-Reference: <4F16F3CA.90904@kernel.dk>
Original-patch-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-02-08 09:19:38 +01:00
Tejun Heo
11a3122f6c block: strip out locking optimization in put_io_context()
put_io_context() performed a complex trylock dancing to avoid
deferring ioc release to workqueue.  It was also broken on UP because
trylock was always assumed to succeed which resulted in unbalanced
preemption count.

While there are ways to fix the UP breakage, even the most
pathological microbench (forced ioc allocation and tight fork/exit
loop) fails to show any appreciable performance benefit of the
optimization.  Strip it out.  If there turns out to be workloads which
are affected by this change, simpler optimization from the discussion
thread can be applied later.

Signed-off-by: Tejun Heo <tj@kernel.org>
LKML-Reference: <1328514611.21268.66.camel@sli10-conroe>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-02-07 07:51:30 +01:00
Shaohua Li
9fa73472dd block: fix ioc locking warning
Meelis reported a warning:

WARNING: at kernel/timer.c:1122 run_timer_softirq+0x199/0x1ec()
Hardware name: 939Dual-SATA2
timer: cfq_idle_slice_timer+0x0/0xaa preempt leak: 00000102 -> 00000103
Modules linked in: sr_mod cdrom videodev media drm_kms_helper ohci_hcd ehci_hcd v4l2_compat_ioctl32 usbcore i2c_ali15x3 snd_seq drm snd_timer snd_seq
Pid: 0, comm: swapper Not tainted 3.3.0-rc2-00110-gd125666 #176
Call Trace:
 <IRQ>  [<ffffffff81022aaa>] warn_slowpath_common+0x7e/0x96
 [<ffffffff8114c485>] ? cfq_slice_expired+0x1d/0x1d
 [<ffffffff81022b56>] warn_slowpath_fmt+0x41/0x43
 [<ffffffff8114c526>] ? cfq_idle_slice_timer+0xa1/0xaa
 [<ffffffff8114c485>] ? cfq_slice_expired+0x1d/0x1d
 [<ffffffff8102c124>] run_timer_softirq+0x199/0x1ec
 [<ffffffff81047a53>] ? timekeeping_get_ns+0x12/0x31
 [<ffffffff810145fd>] ? apic_write+0x11/0x13
 [<ffffffff81027475>] __do_softirq+0x74/0xfa
 [<ffffffff812f337a>] call_softirq+0x1a/0x30
 [<ffffffff81002ff9>] do_softirq+0x31/0x68
 [<ffffffff810276cf>] irq_exit+0x3d/0xa3
 [<ffffffff81014aca>] smp_apic_timer_interrupt+0x6b/0x77
 [<ffffffff812f2de9>] apic_timer_interrupt+0x69/0x70
 <EOI>  [<ffffffff81040136>] ? sched_clock_cpu+0x73/0x7d
 [<ffffffff81040136>] ? sched_clock_cpu+0x73/0x7d
 [<ffffffff8100801f>] ? default_idle+0x1e/0x32
 [<ffffffff81008019>] ? default_idle+0x18/0x32
 [<ffffffff810008b1>] cpu_idle+0x87/0xd1
 [<ffffffff812de861>] rest_init+0x85/0x89
 [<ffffffff81659a4d>] start_kernel+0x2eb/0x2f8
 [<ffffffff8165926e>] x86_64_start_reservations+0x7e/0x82
 [<ffffffff81659362>] x86_64_start_kernel+0xf0/0xf7

this_q == locked_q is possible. There are two problems here:
1. In UP case, there is preemption counter issue as spin_trylock always
successes.
2. In SMP case, the loop breaks too earlier.

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Reported-by: Meelis Roos <mroos@linux.ee>
Reported-by: Knut Petersen <Knut_Petersen@t-online.de>
Tested-by: Knut Petersen <Knut_Petersen@t-online.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-02-06 08:57:29 +01:00
Li Zefan
761b3ef50e cgroup: remove cgroup_subsys argument from callbacks
The argument is not used at all, and it's not necessary, because
a specific callback handler of course knows which subsys it
belongs to.

Now only ->pupulate() takes this argument, because the handlers of
this callback always call cgroup_add_file()/cgroup_add_files().

So we reduce a few lines of code, though the shrinking of object size
is minimal.

 16 files changed, 113 insertions(+), 162 deletions(-)

   text    data     bss     dec     hex filename
5486240  656987 7039960 13183187         c928d3 vmlinux.o.orig
5486170  656987 7039960 13183117         c9288d vmlinux.o

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2012-02-02 09:20:22 -08:00
Peter Zijlstra
39be350127 sched, block: Unify cache detection
The block layer has some code trying to determine if two CPUs share a
cache, the scheduler has a similar function. Expose the function used
by the scheduler and make the block layer use it, thereby removing the
block layers usage of CONFIG_SCHED* and topology bits.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Jens Axboe <axboe@kernel.dk>
Link: http://lkml.kernel.org/r/1327579450.2446.95.camel@twins
2012-01-27 13:28:48 +01:00
Shaohua Li
05c30b9551 block: fix NULL icq_cache reference
Vivek reported a kernel crash:
[   94.217015] BUG: unable to handle kernel NULL pointer dereference at 000000000000001c
[   94.218004] IP: [<ffffffff81142fae>] kmem_cache_free+0x5e/0x200
[   94.218004] PGD 13abda067 PUD 137d52067 PMD 0
[   94.218004] Oops: 0000 [#1] SMP DEBUG_PAGEALLOC
[   94.218004] CPU 0
[   94.218004] Modules linked in: [last unloaded: scsi_wait_scan]
[   94.218004]
[   94.218004] Pid: 0, comm: swapper/0 Not tainted 3.2.0+ #16 Hewlett-Packard HP xw6600 Workstation/0A9Ch
[   94.218004] RIP: 0010:[<ffffffff81142fae>]  [<ffffffff81142fae>] kmem_cache_free+0x5e/0x200
[   94.218004] RSP: 0018:ffff88013fc03de0  EFLAGS: 00010006
[   94.218004] RAX: ffffffff81e0d020 RBX: ffff880138b3c680 RCX: 00000001801c001b
[   94.218004] RDX: 00000000003aac1d RSI: ffff880138b3c680 RDI: ffffffff81142fae
[   94.218004] RBP: ffff88013fc03e10 R08: ffff880137830238 R09: 0000000000000001
[   94.218004] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
[   94.218004] R13: ffffea0004e2cf00 R14: ffffffff812f6eb6 R15: 0000000000000246
[   94.218004] FS:  0000000000000000(0000) GS:ffff88013fc00000(0000) knlGS:0000000000000000
[   94.218004] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[   94.218004] CR2: 000000000000001c CR3: 00000001395ab000 CR4: 00000000000006f0
[   94.218004] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   94.218004] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[   94.218004] Process swapper/0 (pid: 0, threadinfo ffffffff81e00000, task ffffffff81e0d020)
[   94.218004] Stack:
[   94.218004]  0000000000000102 ffff88013fc0db20 ffffffff81e22700 ffff880139500f00
[   94.218004]  0000000000000001 000000000000000a ffff88013fc03e20 ffffffff812f6eb6
[   94.218004]  ffff88013fc03e90 ffffffff810c8da2 ffffffff81e01fd8 ffff880137830240
[   94.218004] Call Trace:
[   94.218004]  <IRQ>
[   94.218004]  [<ffffffff812f6eb6>] icq_free_icq_rcu+0x16/0x20
[   94.218004]  [<ffffffff810c8da2>] __rcu_process_callbacks+0x1c2/0x420
[   94.218004]  [<ffffffff810c9038>] rcu_process_callbacks+0x38/0x250
[   94.218004]  [<ffffffff810405ee>] __do_softirq+0xce/0x3e0
[   94.218004]  [<ffffffff8108ed04>] ? clockevents_program_event+0x74/0x100
[   94.218004]  [<ffffffff81090104>] ? tick_program_event+0x24/0x30
[   94.218004]  [<ffffffff8183ed1c>] call_softirq+0x1c/0x30
[   94.218004]  [<ffffffff8100422d>] do_softirq+0x8d/0xc0
[   94.218004]  [<ffffffff81040c3e>] irq_exit+0xae/0xe0
[   94.218004]  [<ffffffff8183f4be>] smp_apic_timer_interrupt+0x6e/0x99
[   94.218004]  [<ffffffff8183e330>] apic_timer_interrupt+0x70/0x80

Once a queue is quiesced, it's not supposed to have any elvpriv data or
icq's, and elevator switching depends on that.  Request alloc path
followed the rule for elvpriv data but forgot apply it to icq's
leading to the following crash during elevator switch. Fix it by not
allocating icq's if ELVPRIV is not set for the request.

Reported-by: Vivek Goyal <vgoyal@redhat.com>
Tested-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-01-19 09:20:10 +01:00
Shaohua Li
df0793abb9 block,cfq: change code order
cfq_slice_expired will change saved_workload_slice. It should be called
first so saved_workload_slice is correctly set to 0 after workload type
is changed.
This fixes the code order changed by 54b466e44b.

Tested-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-01-19 09:20:09 +01:00
Jens Axboe
54b466e44b cfq-iosched: fix use-after-free of cfqq
With the changes in life time management between the cfq IO contexts
and the cfq queues, we now risk having cfqd->active_queue being
freed when cfq_slice_expired() is being called. cfq_preempt_queue()
caches this queue and uses it after calling said function, causing
a use-after-free condition. This triggers the following oops,
when cfqq_type() attempts to dereference it:

BUG: unable to handle kernel paging request at ffff8800746c4f0c
IP: [<ffffffff81266d59>] cfqq_type+0xb/0x20
PGD 18d4063 PUD 1fe15067 PMD 1ffb9067 PTE 80000000746c4160
Oops: 0000 [#1] SMP DEBUG_PAGEALLOC
CPU 3
Modules linked in:

Pid: 1, comm: init Not tainted 3.2.0-josef+ #367 Bochs Bochs
RIP: 0010:[<ffffffff81266d59>]  [<ffffffff81266d59>] cfqq_type+0xb/0x20
RSP: 0018:ffff880079c11778  EFLAGS: 00010046
RAX: 0000000000000000 RBX: ffff880076f3df08 RCX: 0000000000000000
RDX: 0000000000000006 RSI: ffff880074271888 RDI: ffff8800746c4f08
RBP: ffff880079c11778 R08: 0000000000000078 R09: 0000000000000001
R10: 09f911029d74e35b R11: 09f911029d74e35b R12: ffff880076f337f0
R13: ffff8800746c4f08 R14: ffff8800746c4f08 R15: 0000000000000002
FS:  00007f62fd44f700(0000) GS:ffff88007cd80000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffff8800746c4f0c CR3: 0000000076c21000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process init (pid: 1, threadinfo ffff880079c10000, task ffff880079c0a040)
Stack:
 ffff880079c117c8 ffffffff812683d8 ffff880079c117a8 ffffffff8125de43
 ffff8800744fcf48 ffff880074b43e98 ffff8800770c8828 ffff880074b43e98
 0000000000000003 0000000000000000 ffff880079c117f8 ffffffff81254149
Call Trace:
 [<ffffffff812683d8>] cfq_insert_request+0x3f5/0x47c
 [<ffffffff8125de43>] ? blk_recount_segments+0x20/0x31
 [<ffffffff81254149>] __elv_add_request+0x1ca/0x200
 [<ffffffff8125aa99>] blk_queue_bio+0x2ef/0x312
 [<ffffffff81258f7b>] generic_make_request+0x9f/0xe0
 [<ffffffff8125907b>] submit_bio+0xbf/0xca
 [<ffffffff81136ec7>] submit_bh+0xdf/0xfe
 [<ffffffff81176d04>] ext3_bread+0x50/0x99
 [<ffffffff811785b3>] dx_probe+0x38/0x291
 [<ffffffff81178864>] ext3_dx_find_entry+0x58/0x219
 [<ffffffff81178ad5>] ext3_find_entry+0xb0/0x406
 [<ffffffff8110c4d5>] ? cache_alloc_debugcheck_after.isra.46+0x14d/0x1a0
 [<ffffffff8110cfbd>] ? kmem_cache_alloc+0xef/0x191
 [<ffffffff8117a330>] ext3_lookup+0x39/0xe1
 [<ffffffff81119461>] d_alloc_and_lookup+0x45/0x6c
 [<ffffffff8111ac41>] do_lookup+0x1e4/0x2f5
 [<ffffffff8111aef6>] link_path_walk+0x1a4/0x6ef
 [<ffffffff8111b557>] path_lookupat+0x59/0x5ea
 [<ffffffff8127406c>] ? __strncpy_from_user+0x30/0x5a
 [<ffffffff8111bce0>] do_path_lookup+0x23/0x59
 [<ffffffff8111cfd6>] user_path_at_empty+0x53/0x99
 [<ffffffff8107b37b>] ? remove_wait_queue+0x51/0x56
 [<ffffffff8111d02d>] user_path_at+0x11/0x13
 [<ffffffff811141f5>] vfs_fstatat+0x3a/0x64
 [<ffffffff8111425a>] vfs_stat+0x1b/0x1d
 [<ffffffff81114359>] sys_newstat+0x1a/0x33
 [<ffffffff81060e12>] ? task_stopped_code+0x42/0x42
 [<ffffffff815d6712>] system_call_fastpath+0x16/0x1b
Code: 89 e6 48 89 c7 e8 fa ca fe ff 85 c0 74 06 4c 89 2b 41 b6 01 5b 44 89 f0 41 5c 41 5d 41 5e 5d c3 55 48 89 e5 66 66 66 66 90 31 c0 <8b> 57 04 f6 c6 01 74 0b 83 e2 20 83 fa 01 19 c0 83 c0 02 5d c3
RIP  [<ffffffff81266d59>] cfqq_type+0xb/0x20
 RSP <ffff880079c11778>
CR2: ffff8800746c4f0c

Get rid of the caching of cfqd->active_queue, and reorder the
check so that it happens before we expire the active queue.

Thanks to Tejun for pin pointing the error location.

Reported-by: Chris Mason <chris.mason@oracle.com>
Tested-by: Chris Mason <chris.mason@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-01-17 21:26:11 +01:00
Linus Torvalds
b3c9dd182e Merge branch 'for-3.3/core' of git://git.kernel.dk/linux-block
* 'for-3.3/core' of git://git.kernel.dk/linux-block: (37 commits)
  Revert "block: recursive merge requests"
  block: Stop using macro stubs for the bio data integrity calls
  blockdev: convert some macros to static inlines
  fs: remove unneeded plug in mpage_readpages()
  block: Add BLKROTATIONAL ioctl
  block: Introduce blk_set_stacking_limits function
  block: remove WARN_ON_ONCE() in exit_io_context()
  block: an exiting task should be allowed to create io_context
  block: ioc_cgroup_changed() needs to be exported
  block: recursive merge requests
  block, cfq: fix empty queue crash caused by request merge
  block, cfq: move icq creation and rq->elv.icq association to block core
  block, cfq: restructure io_cq creation path for io_context interface cleanup
  block, cfq: move io_cq exit/release to blk-ioc.c
  block, cfq: move icq cache management to block core
  block, cfq: move io_cq lookup to blk-ioc.c
  block, cfq: move cfqd->icq_list to request_queue and add request->elv.icq
  block, cfq: reorganize cfq_io_context into generic and cfq specific parts
  block: remove elevator_queue->ops
  block: reorder elevator switch sequence
  ...

Fix up conflicts in:
 - block/blk-cgroup.c
	Switch from can_attach_task to can_attach
 - block/cfq-iosched.c
	conflict with now removed cic index changes (we now use q->id instead)
2012-01-15 12:24:45 -08:00
Jens Axboe
5d381efb3d Revert "block: recursive merge requests"
This reverts commit 274193224c.

We have some problems related to selection of empty queues
that need to be resolved, evidence so far points to the
recursive merge logic making either being the cause or at
least the accelerator for this. So revert it for now, until
we figure this out.

Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-01-15 10:29:48 +01:00
Paolo Bonzini
0bfc96cb77 block: fail SCSI passthrough ioctls on partition devices
Linux allows executing the SG_IO ioctl on a partition or LVM volume, and
will pass the command to the underlying block device.  This is
well-known, but it is also a large security problem when (via Unix
permissions, ACLs, SELinux or a combination thereof) a program or user
needs to be granted access only to part of the disk.

This patch lets partitions forward a small set of harmless ioctls;
others are logged with printk so that we can see which ioctls are
actually sent.  In my tests only CDROM_GET_CAPABILITY actually occurred.
Of course it was being sent to a (partition on a) hard disk, so it would
have failed with ENOTTY and the patch isn't changing anything in
practice.  Still, I'm treating it specially to avoid spamming the logs.

In principle, this restriction should include programs running with
CAP_SYS_RAWIO.  If for example I let a program access /dev/sda2 and
/dev/sdb, it still should not be able to read/write outside the
boundaries of /dev/sda2 independent of the capabilities.  However, for
now programs with CAP_SYS_RAWIO will still be allowed to send the
ioctls.  Their actions will still be logged.

This patch does not affect the non-libata IDE driver.  That driver
however already tests for bd != bd->bd_contains before issuing some
ioctl; it could be restricted further to forbid these ioctls even for
programs running with CAP_SYS_ADMIN/CAP_SYS_RAWIO.

Cc: linux-scsi@vger.kernel.org
Cc: Jens Axboe <axboe@kernel.dk>
Cc: James Bottomley <JBottomley@parallels.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[ Make it also print the command name when warning - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-14 15:07:24 -08:00
Paolo Bonzini
577ebb374c block: add and use scsi_blk_cmd_ioctl
Introduce a wrapper around scsi_cmd_ioctl that takes a block device.

The function will then be enhanced to detect partition block devices
and, in that case, subject the ioctls to whitelisting.

Cc: linux-scsi@vger.kernel.org
Cc: Jens Axboe <axboe@kernel.dk>
Cc: James Bottomley <JBottomley@parallels.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-14 15:07:24 -08:00
Martin K. Petersen
ef00f59c95 block: Add BLKROTATIONAL ioctl
Introduce an ioctl which permits applications to query whether a block
device is rotational.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-01-11 16:29:31 +01:00
Martin K. Petersen
b1bd055d39 block: Introduce blk_set_stacking_limits function
Stacking driver queue limits are typically bounded exclusively by the
capabilities of the low level devices, not by the stacking driver
itself.

This patch introduces blk_set_stacking_limits() which has more liberal
metrics than the default queue limits function. This allows us to
inherit topology parameters from bottom devices without manually
tweaking the default limits in each driver prior to calling the stacking
function.

Since there is now a clear distinction between stacking and low-level
devices, blk_set_default_limits() has been modified to carry the more
conservative values that we used to manually set in
blk_queue_make_request().

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-01-11 16:27:11 +01:00
Linus Torvalds
db0c2bf69a Merge branch 'for-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
* 'for-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (21 commits)
  cgroup: fix to allow mounting a hierarchy by name
  cgroup: move assignement out of condition in cgroup_attach_proc()
  cgroup: Remove task_lock() from cgroup_post_fork()
  cgroup: add sparse annotation to cgroup_iter_start() and cgroup_iter_end()
  cgroup: mark cgroup_rmdir_waitq and cgroup_attach_proc() as static
  cgroup: only need to check oldcgrp==newgrp once
  cgroup: remove redundant get/put of task struct
  cgroup: remove redundant get/put of old css_set from migrate
  cgroup: Remove unnecessary task_lock before fetching css_set on migration
  cgroup: Drop task_lock(parent) on cgroup_fork()
  cgroups: remove redundant get/put of css_set from css_set_check_fetched()
  resource cgroups: remove bogus cast
  cgroup: kill subsys->can_attach_task(), pre_attach() and attach_task()
  cgroup, cpuset: don't use ss->pre_attach()
  cgroup: don't use subsys->can_attach_task() or ->attach_task()
  cgroup: introduce cgroup_taskset and use it in subsys->can_attach(), cancel_attach() and attach()
  cgroup: improve old cgroup handling in cgroup_attach_proc()
  cgroup: always lock threadgroup during migration
  threadgroup: extend threadgroup_lock() to cover exit and exec
  threadgroup: rename signal->threadgroup_fork_lock to ->group_rwsem
  ...

Fix up conflict in kernel/cgroup.c due to commit e0197aae59: "cgroups:
fix a css_set not found bug in cgroup_attach_proc" that already
mentioned that the bug is fixed (differently) in Tejun's cgroup
patchset. This one, in other words.
2012-01-09 12:59:24 -08:00
Linus Torvalds
972b2c7199 Merge branch 'for-linus2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
* 'for-linus2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (165 commits)
  reiserfs: Properly display mount options in /proc/mounts
  vfs: prevent remount read-only if pending removes
  vfs: count unlinked inodes
  vfs: protect remounting superblock read-only
  vfs: keep list of mounts for each superblock
  vfs: switch ->show_options() to struct dentry *
  vfs: switch ->show_path() to struct dentry *
  vfs: switch ->show_devname() to struct dentry *
  vfs: switch ->show_stats to struct dentry *
  switch security_path_chmod() to struct path *
  vfs: prefer ->dentry->d_sb to ->mnt->mnt_sb
  vfs: trim includes a bit
  switch mnt_namespace ->root to struct mount
  vfs: take /proc/*/mounts and friends to fs/proc_namespace.c
  vfs: opencode mntget() mnt_set_mountpoint()
  vfs: spread struct mount - remaining argument of next_mnt()
  vfs: move fsnotify junk to struct mount
  vfs: move mnt_devname
  vfs: move mnt_list to struct mount
  vfs: switch pnode.h macros to struct mount *
  ...
2012-01-08 12:19:57 -08:00
Al Viro
ece2ccb668 Merge branches 'vfsmount-guts', 'umode_t' and 'partitions' into Z 2012-01-06 23:15:54 -05:00
Linus Torvalds
07d106d0a3 vfs: fix up ENOIOCTLCMD error handling
We're doing some odd things there, which already messes up various users
(see the net/socket.c code that this removes), and it was going to add
yet more crud to the block layer because of the incorrect error code
translation.

ENOIOCTLCMD is not an error return that should be returned to user mode
from the "ioctl()" system call, but it should *not* be translated as
EINVAL ("Invalid argument").  It should be translated as ENOTTY
("Inappropriate ioctl for device").

That EINVAL confusion has apparently so permeated some code that the
block layer actually checks for it, which is sad.  We continue to do so
for now, but add a big comment about how wrong that is, and we should
remove it entirely eventually.  In the meantime, this tries to keep the
changes localized to just the EINVAL -> ENOTTY fix, and removing code
that makes it harder to do the right thing.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-05 15:40:12 -08:00
Al Viro
2c9ede55ec switch device_get_devnode() and ->devnode() to umode_t *
both callers of device_get_devnode() are only interested in lower 16bits
and nobody tries to return anything wider than 16bit anyway.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03 22:54:55 -05:00
Al Viro
ff01bb4832 fs: move code out of buffer.c
Move invalidate_bdev, block_sync_page into fs/block_dev.c.  Export
kill_bdev as well, so brd doesn't have to open code it.  Reduce
buffer_head.h requirement accordingly.

Removed a rather large comment from invalidate_bdev, as it looked a bit
obsolete to bother moving.  The small comment replacing it says enough.

Signed-off-by: Nick Piggin <npiggin@suse.de>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03 22:54:07 -05:00
Al Viro
94ea4158f1 separate partition format handling from generic code
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03 22:54:06 -05:00
Al Viro
9be96f3fd1 move fs/partitions to block/
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03 22:54:06 -05:00
Al Viro
4752bc309b make register_disk() static
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03 22:54:05 -05:00
Dan Williams
f2b20d4365 block: fix blk_queue_end_tag()
Commit 5e081591 "block: warn if tag is greater than real_max_depth"
cleaned up blk_queue_end_tag() to warn when the tag is truly invalid
(greater than real_max_depth).  However, it changed behavior in the tag <
max_depth case to not end the request.  Leading to triggering of
BUG_ON(blk_queued_rq(rq)) in the request completion path:

  http://marc.info/?l=linux-kernel&m=132204370518629&w=2

In order to allow blk_queue_resize_tags() to shrink the tag space
blk_queue_end_tag() must always complete tags with a value less than
real_max_depth regardless of the current max_depth.  The comment about
"handling the shrink case" seems to be what prompted changes in this
space, so remove it and BUG on all invalid tags (made even simpler by
Matthew's suggestion to use an unsigned compare).

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Cc: Tao Ma <boyu.mt@taobao.com>
Cc: Matthew Wilcox <matthew@wil.cx>
Reported-by: Meelis Roos <mroos@ut.ee>
Reported-by: Ed Nadolski <edmund.nadolski@intel.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-12-29 09:16:28 +01:00
Tejun Heo
c98b2cc29a block: remove WARN_ON_ONCE() in exit_io_context()
6e736be7 "block: make ioc get/put interface more conventional and fix
race on alloction" added WARN_ON_ONCE() in exit_io_context() which
triggers if !PF_EXITING.  All tasks hitting exit_io_context() from
task exit should have PF_EXITING set but task struct tearing down
after fork failure calls into the function without PF_EXITING,
triggering the condition.

  WARNING: at block/blk-ioc.c:234 exit_io_context+0x40/0x92()
  Pid: 17090, comm: trinity Not tainted 3.2.0-rc6-next-20111222-sasha-dirty #77
  Call Trace:
   [<ffffffff810b69a3>] warn_slowpath_common+0x8f/0xb2
   [<ffffffff810b6a77>] warn_slowpath_null+0x18/0x1a
   [<ffffffff8181a7a2>] exit_io_context+0x40/0x92
   [<ffffffff810b58c9>] copy_process+0x126f/0x1453
   [<ffffffff810b5c1b>] do_fork+0x120/0x3e9
   [<ffffffff8106242f>] sys_clone+0x26/0x28
   [<ffffffff82425803>] stub_clone+0x13/0x20
  ---[ end trace a2e4eb670b375238 ]---

Reported-by: Sasha Levin <levinsasha928@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-12-27 18:52:16 +01:00
Tejun Heo
fd63836811 block: an exiting task should be allowed to create io_context
While fixing io_context creation / task exit race condition,
6e736be7f2 "block: make ioc get/put interface more conventional and
fix race on alloction" also prevented an exiting (%PF_EXITING) task
from creating its own io_context.  This is incorrect as exit path may
issue IOs, e.g. from exit_files(), and if those IOs are the first ones
issued by the task, io_context needs to be created to process the IOs.

Combined with the existing problem of io_context / io_cq creation
failure having the possibility of stalling IO, this problem results in
deterministic full IO lockup with certain workloads.

Fix it by allowing io_context creation regardless of %PF_EXITING for
%current.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Andrew Morton <akpm@linux-foundation.org>
Reported-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-12-25 14:29:14 +01:00
majianpeng
609f6ea1c9 block: re-use existing 'reading' variable instead of checking direction again
Signed-off-by: majianpeng <majianpeng@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-12-21 15:27:24 +01:00
Jens Axboe
64c42998f1 block: ioc_cgroup_changed() needs to be exported
With the ioc changed, ioc_cgroup_changed() can be used by modular
code. So ensure that it is exported.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-12-19 10:36:44 +01:00
Shaohua Li
6ae0516b8a block, cfq: fix empty queue crash caused by request merge
All requests of a queue could be merged to other requests of other queue.
Such queue will not have request in it, but it's in service tree. This
will cause kernel oops.
I encounter a BUG_ON() in cfq_dispatch_request() with next patch, but the
issue should exist without the patch.

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-12-16 14:04:23 +01:00
Shaohua Li
274193224c block: recursive merge requests
In my workload, thread 1 accesses a, a+2, ..., thread 2 accesses a+1,
a+3,.... When the requests are flushed to queue, a and a+1 are merged
to (a, a+1), a+2 and a+3 too to (a+2, a+3), but (a, a+1) and (a+2, a+3)
aren't merged.
With recursive merge below, the workload throughput gets improved 20%
and context switch drops 60%.

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-12-16 14:00:31 +01:00