This re-applies the workaround for "some DP sinks, [which] are a
little nuts" from commit 1a36147bb9 ("drm/i915: Perform link
quality check unconditionally during long pulse").
It makes the secondary AOC E2460P monitor connected via DP to an
acer Veriton N4640G usable again.
This hunk was dropped in commit c85d200e83 ("drm/i915: Move SST
DP link retraining into the ->post_hotplug() hook")
Fixes: c85d200e83 ("drm/i915: Move SST DP link retraining into the ->post_hotplug() hook")
[Cleaned up commit message, added stable cc]
Signed-off-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Jan-Marek Glogowski <glogow@fbihome.de>
Cc: stable@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20180825191035.3945-1-lyude@redhat.com
(cherry picked from commit 3cf71bc990)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The _IOC_READ flag fits this ioctl request more because this request
actually only writes to, but doesn't read from userspace.
See NOTEs in include/uapi/asm-generic/ioctl.h for more information.
Fixes: 429711aec2 ("vhost: switch to use new message format")
Signed-off-by: Gleb Fotengauer-Malinovskiy <glebfm@altlinux.org>
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This card identifies itself as:
Ethernet controller [0200]: NCube Device [10ff:8168] (rev 06)
Subsystem: TP-LINK Technologies Co., Ltd. Device [7470:3468]
Adding a new entry to rtl8169_pci_tbl makes the card work.
Link: http://launchpad.net/bugs/1788730
Signed-off-by: Anthony Wong <anthony.wong@ubuntu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
man ip-tunnel ttl section says:
0 is a special value meaning that packets inherit the TTL value.
IPv4 tunnel respect this in ip_tunnel_xmit(), but IPv6 tunnel has not
implement it yet. To make IPv6 behave consistently with IP tunnel,
add ipv6 tunnel inherit support.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
E.g. for snd_hdac_ext_link_clear_stream_id(), we should set (1 << stream)
as mask, and 0 as value, here correct it and several similar mismatches.
And, here also remove unreadable register_mask usage for those mask value
updating.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
syzbot reported the uninitialized value exposure in certain situations
using virmidi loop. It's likely a very small race at writing and
reading, and the influence is almost negligible. But it's safer to
paper over this just by replacing the existing kvmalloc() with
kvzalloc().
Reported-by: syzbot+194dffdb8b22fc5d207a@syzkaller.appspotmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Commit 92183a4289 ("fsnotify: fix ignore mask logic in
send_to_group()") acknoledges the use case of ignoring an event on
an inode mark, because of an ignore mask on a mount mark of the same
group (i.e. I want to get all events on this file, except for the events
that came from that mount).
This change depends on correctly merging the inode marks and mount marks
group lists, so that the mount mark ignore mask would be tested in
send_to_group(). Alas, the merging of the lists did not take into
account the case where event in question is not in the mask of any of
the mount marks.
To fix this, completely remove the tests for inode and mount event masks
from the lists merging code.
Fixes: 92183a4289 ("fsnotify: fix ignore mask logic in send_to_group")
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
It is read_persistent_wall_and_boot_offset() and not
read_persistent_clock_and_boot_offset()
Fixes: 3eca993740 ("timekeeping: Replace read_boot_clock64() with read_persistent_wall_and_boot_offset()")
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Pavel Tatashin <pasha.tatashin@oracle.com>
Link: https://lkml.kernel.org/r/20180903081533.34366-1-borntraeger@de.ibm.com
Fix kernel-doc warnings in arch/x86/include/asm/atomic.h that are caused by
having a #define macro between the kernel-doc notation and the function
name. Fixed by moving the #define macro to after the function
implementation.
Make the same change for atomic64_{32,64}.h for consistency even though
there were no kernel-doc warnings found in these header files, but there
would be if they were used in generation of documentation.
Fixes these kernel-doc warnings:
../arch/x86/include/asm/atomic.h:84: warning: Excess function parameter 'i' description in 'arch_atomic_sub_and_test'
../arch/x86/include/asm/atomic.h:84: warning: Excess function parameter 'v' description in 'arch_atomic_sub_and_test'
../arch/x86/include/asm/atomic.h:96: warning: Excess function parameter 'v' description in 'arch_atomic_inc'
../arch/x86/include/asm/atomic.h:109: warning: Excess function parameter 'v' description in 'arch_atomic_dec'
../arch/x86/include/asm/atomic.h:124: warning: Excess function parameter 'v' description in 'arch_atomic_dec_and_test'
../arch/x86/include/asm/atomic.h:138: warning: Excess function parameter 'v' description in 'arch_atomic_inc_and_test'
../arch/x86/include/asm/atomic.h:153: warning: Excess function parameter 'i' description in 'arch_atomic_add_negative'
../arch/x86/include/asm/atomic.h:153: warning: Excess function parameter 'v' description in 'arch_atomic_add_negative'
Fixes: 18cc1814d4 ("atomics/treewide: Make test ops optional")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Mark Rutland <mark.rutland@arm.com>
Link: https://lkml.kernel.org/r/0a1e678d-c8c5-b32c-2640-ed4e94d399d2@infradead.org
When tracing is enabled, all the debug messages are recorded and must
not exceed MAX_MSG_LEN (100) columns. Longer debug messages grant the
user with:
WARNING: CPU: 3 PID: 32642 at /tmp/wifi-core-20180806094828/src/iwlwifi-stack-dev/net/mac80211/./trace_msg.h:32 trace_event_raw_event_mac80211_msg_event+0xab/0xc0 [mac80211]
Workqueue: phy1 ieee80211_iface_work [mac80211]
RIP: 0010:trace_event_raw_event_mac80211_msg_event+0xab/0xc0 [mac80211]
Call Trace:
__sdata_dbg+0xbd/0x120 [mac80211]
ieee80211_ibss_rx_queued_mgmt+0x15f/0x510 [mac80211]
ieee80211_iface_work+0x21d/0x320 [mac80211]
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If the driver fails to properly prepare for the channel
switch, mac80211 will disconnect. If the CSA IE had mode
set to 1, it means that the clients are not allowed to send
any Tx on the current channel, and that includes the
deauthentication frame.
Make sure that we don't send the deauthentication frame in
this case.
In iwlwifi, this caused a failure to flush queues since the
firmware already closed the queues after having parsed the
CSA IE. Then mac80211 would wait until the deauthentication
frame would go out (drv_flush(drop=false)) and that would
never happen.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When performing a channel switch flow for a managed interface, the
flow did not update the bandwidth of the AP station and the rate
scale algorithm. In case of a channel width downgrade, this would
result with the rate scale algorithm using a bandwidth that does not
match the interface channel configuration.
Fix this by updating the AP station bandwidth and rate scaling algorithm
before the actual channel change in case of a bandwidth downgrade, or
after the actual channel change in case of a bandwidth upgrade.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We hit a problem with iwlwifi that was caused by a bug in
mac80211. A bug in iwlwifi caused the firwmare to crash in
certain cases in channel switch. Because of that bug,
drv_pre_channel_switch would fail and trigger the restart
flow.
Now we had the hw restart worker which runs on the system's
workqueue and the csa_connection_drop_work worker that runs
on mac80211's workqueue that can run together. This is
obviously problematic since the restart work wants to
reconfigure the connection, while the csa_connection_drop_work
worker does the exact opposite: it tries to disconnect.
Fix this by cancelling the csa_connection_drop_work worker
in the restart worker.
Note that this can sound racy: we could have:
driver iface_work CSA_work restart_work
+++++++++++++++++++++++++++++++++++++++++++++
|
<--drv_cs ---|
<FW CRASH!>
-CS FAILED-->
| |
| cancel_work(CSA)
schedule |
CSA work |
| |
Race between those 2
But this is not possible because we flush the workqueue
in the restart worker before we cancel the CSA worker.
That would be bullet proof if we could guarantee that
we schedule the CSA worker only from the iface_work
which runs on the workqueue (and not on the system's
workqueue), but unfortunately we do have an instance
in which we schedule the CSA work outside the context
of the workqueue (ieee80211_chswitch_done).
Note also that we should probably cancel other workers
like beacon_connection_loss_work and possibly others
for different types of interfaces, at the very least,
IBSS should suffer from the exact same problem, but for
now, do the minimum to fix the actual bug that was actually
experienced and reproduced.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In commit 9236c4523e5b ("mac80211: limit wmm params to comply
with ETSI requirements"), we have limited the WMM parameters to
comply with 802.11 and ETSI standard. Mistakenly the TXOP value
was caluclated wrong. Fix it by taking the minimum between
802.11 to ETSI to make sure we are not violating both.
Fixes: e552af0581 ("mac80211: limit wmm params to comply with ETSI requirements")
Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The "chandef->center_freq1" variable is a u32 but "freq" is a u16 so we
are truncating away the high bits. I noticed this bug because in commit
9cf0a0b4b6 ("cfg80211: Add support for 60GHz band channels 5 and 6")
we made "freq <= 56160 + 2160 * 6" a valid requency when before it was
only "freq <= 56160 + 2160 * 4" that was valid. It introduces a static
checker warning:
net/wireless/util.c:1571 ieee80211_chandef_to_operating_class()
warn: always true condition '(freq <= 56160 + 2160 * 6) => (0-u16max <= 69120)'
But really we probably shouldn't have been truncating the high bits
away to begin with.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Initialize 'n' to 2 in order to take into account also the first
packet in the estimation of max_subframe limit for a given A-MSDU
since frag_tail pointer is NULL when ieee80211_amsdu_aggregate
routine analyzes the second frame.
Fixes: 6e0456b545 ("mac80211: add A-MSDU tx support")
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This trys to give new born vGPU with higher scheduling chance
not only with adding to sched list head and also have higher
priority for workload sched for 2 seconds after starting to
schedule it. In order for fast GPU execution during VM boot,
and ensure guest driver setup with required state given in time.
This fixes recent failure seen on one VM with multiple linux VMs
running on kernel with commit 2621cefaa42b3("drm/i915: Provide a timeout to i915_gem_wait_for_idle() on setup"),
which had shorter setup timeout that caused context state init failed.
v2: change to 2s for higher scheduling period
Cc: Yuan Hang <hang.yuan@intel.com>
Reviewed-by: Hang Yuan <hang.yuan@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
This patch is required allows access to a Microsoft fileserver failover
cluster behind a 1:1 NAT firewall.
The change also provides stronger context for authentication and share
connection (see MS-SMB2 3.3.5.7 and MS-SRVS 3.1.6.8) as noted by
Tom Talpey, and addresses comments about the buffer size for the UNC
made by Aurélien Aptel.
Signed-off-by: Thomas Werschlein <thomas.werschlein@geo.uzh.ch>
Signed-off-by: Steve French <stfrench@microsoft.com>
CC: Tom Talpey <ttalpey@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
CC: Stable <stable@vger.kernel.org>
Although servers will typically ignore unsupported features,
we should advertise the support for directory leases (as
Windows e.g. does) in the negotiate protocol capabilities we
pass to the server, and should check for the server capability
(CAP_DIRECTORY_LEASING) before sending a lease request for an
open of a directory. This will prevent us from accidentally
sending directory leases to SMB2.1 or SMB2 server for example.
Signed-off-by: Steve French <stfrench@microsoft.com>
CC: Stable <stable@vger.kernel.org>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
I ran into some cases where server was returning the wrong length
on frames but I couldn't easily match them to the command in the
network trace (or server logs) since I need the command and/or
multiplex id to find the offending SMB2/SMB3 command. Add these
two fields to the log message. In the case of padding too much
it may not be a problem in all cases but might have correlated
to a network disconnect case in some problems we have been
looking at. In the case of frame too short is even more important.
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
When "backup intent" is requested on the mount (e.g. backupuid or
backupgid mount options), the corresponding flag needs to be set
on opens of directories (and files) but was missing in some
places causing access denied trying to enumerate and backup
servers.
Fixes kernel bugzilla #200953https://bugzilla.kernel.org/show_bug.cgi?id=200953
Reported-and-tested-by: <whh@rubrik.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
CC: Stable <stable@vger.kernel.org>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
When a Mac client saves an item containing a backslash to a file server
the backslash is represented in the CIFS/SMB protocol as as U+F026.
Before this change, listing a directory containing an item with a
backslash in its name will return that item with the backslash
represented with a true backslash character (U+005C) because
convert_sfm_character mapped U+F026 to U+005C when interpretting the
CIFS/SMB protocol response. However, attempting to open or stat the
path using a true backslash will result in an error because
convert_to_sfm_char does not map U+005C back to U+F026 causing the
CIFS/SMB request to be made with the backslash represented as U+005C.
This change simply prevents the U+F026 to U+005C conversion from
happenning. This is analogous to how the code does not do any
translation of UNI_SLASH (U+F000).
Signed-off-by: Jon Kuhn <jkuhn@barracuda.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
A few fixes for the fallout of being a little more pedantic about
dma masks.
-----BEGIN PGP SIGNATURE-----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=GFai
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-4.19-2' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping fixes from Christoph Hellwig:
"A few fixes for the fallout of being a little more pedantic about dma
masks"
* tag 'dma-mapping-4.19-2' of git://git.infradead.org/users/hch/dma-mapping:
of/platform: initialise AMBA default DMA masks
sparc: set a default 32-bit dma mask for OF devices
kernel/dma/direct: take DMA offset into account in dma_direct_supported
The bootmem to memblock conversion introduced by the commit 1008a11590
("m68k: switch to MEMBLOCK + NO_BOOTMEM") made reservation of kernel code
and data to start from a wrong address.
Fix it.
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Tested-by: Angelo Dureghello <angelo@sysam.it>
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
Include linux/in6.h for struct in6_addr.
/usr/include/linux/rds.h:156:18: error: field ‘laddr’ has incomplete type
struct in6_addr laddr;
^~~~~
/usr/include/linux/rds.h:157:18: error: field ‘faddr’ has incomplete type
struct in6_addr faddr;
^~~~~
/usr/include/linux/rds.h:178:18: error: field ‘laddr’ has incomplete type
struct in6_addr laddr;
^~~~~
/usr/include/linux/rds.h:179:18: error: field ‘faddr’ has incomplete type
struct in6_addr faddr;
^~~~~
/usr/include/linux/rds.h:198:18: error: field ‘bound_addr’ has incomplete type
struct in6_addr bound_addr;
^~~~~~~~~~
/usr/include/linux/rds.h:199:18: error: field ‘connected_addr’ has incomplete type
struct in6_addr connected_addr;
^~~~~~~~~~~~~~
/usr/include/linux/rds.h:219:18: error: field ‘local_addr’ has incomplete type
struct in6_addr local_addr;
^~~~~~~~~~
/usr/include/linux/rds.h:221:18: error: field ‘peer_addr’ has incomplete type
struct in6_addr peer_addr;
^~~~~~~~~
/usr/include/linux/rds.h:245:18: error: field ‘src_addr’ has incomplete type
struct in6_addr src_addr;
^~~~~~~~
/usr/include/linux/rds.h:246:18: error: field ‘dst_addr’ has incomplete type
struct in6_addr dst_addr;
^~~~~~~~
Fixes: b7ff8b1036 ("rds: Extend RDS API for IPv6 support")
Signed-off-by: Vinson Lee <vlee@freedesktop.org>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The kernel module may sleep with holding a spinlock.
The function call paths (from bottom to top) in Linux-4.16 are:
[FUNC] usleep_range
drivers/net/ethernet/cadence/macb_main.c, 648:
usleep_range in macb_halt_tx
drivers/net/ethernet/cadence/macb_main.c, 730:
macb_halt_tx in macb_tx_error_task
drivers/net/ethernet/cadence/macb_main.c, 721:
_raw_spin_lock_irqsave in macb_tx_error_task
To fix this bug, usleep_range() is replaced with udelay().
This bug is found by my static analysis tool DSAC.
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann says:
====================
pull-request: bpf 2018-09-02
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) Fix one remaining buggy offset override in sockmap's bpf_msg_pull_data()
when linearizing multiple scatterlist elements, from Tushar.
2) Fix BPF sockmap's misuse of ULP when a collision with another ULP is
found on map update where it would release existing ULP. syzbot found and
triggered this couple of times now, fix from John.
3) Add missing xskmap type to bpftool so it will properly show the type
on map dump, from Prashant.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
mx8dv never entered into production and there is no other place
in the kernel referring to this SoC, so remove it from the
driver's compatible entry.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
mx8dv never entered into production and there is no other place
in the kernel referring to this SoC, so remove it from the
dt bindings documentation.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
This driver currently emits a STOP if the next message is not
I2C_MD_RD. It should not do it because it disturbs the I2C_RDWR
ioctl, where read/write transactions are combined without STOP
between.
Issue STOP only when the message is the last one _or_ flagged with
I2C_M_STOP.
Fixes: 6a62974b66 ("i2c: uniphier_f: add UniPhier FIFO-builtin I2C driver")
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
This driver currently emits a STOP if the next message is not
I2C_MD_RD. It should not do it because it disturbs the I2C_RDWR
ioctl, where read/write transactions are combined without STOP
between.
Issue STOP only when the message is the last one _or_ flagged with
I2C_M_STOP.
Fixes: dd6fd4a327 ("i2c: uniphier: add UniPhier FIFO-less I2C driver")
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Jan reported a regression after an update to 4.18.5. In this case ipv6
default route is setup by systemd-networkd based on data from an RA. The
RA contains an MTU of 1492 which is used when the route is first inserted
but then systemd-networkd pushes down updates to the default route
without the mtu set.
Prior to the change to fib6_info, metrics such as MTU were held in the
dst_entry and rt6i_pmtu in rt6_info contained an update to the mtu if
any. ip6_mtu would look at rt6i_pmtu first and use it if set. If not,
the value from the metrics is used if it is set and finally falling
back to the idev value.
After the fib6_info change metrics are contained in the fib6_info struct
and there is no equivalent to rt6i_pmtu. To maintain consistency with
the old behavior the new code should only reset the MTU in the metrics
if the route update has it set.
Fixes: d4ead6b34b ("net/ipv6: move metrics from dst to rt6_info")
Reported-by: Jan Janssen <medhefgo@web.de>
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The cpsw-phy-sel device is not a child of the cpsw interconnect target
module. It lives in the system control module.
Let's fix this issue by trying to use cpsw-phy-sel phandle first if it
exists and if not fall back to current usage of trying to find the
cpsw-phy-sel child. That way the phy sel driver can be a child of the
system control module where it belongs in the device tree.
Without this fix, we cannot have a proper interconnect target module
hierarchy in device tree for things like genpd.
Note that deferred probe is mostly not supported by cpsw and this patch
does not attempt to fix that. In case deferred probe support is needed,
this could be added to cpsw_slave_open() and phy_connect() so they start
handling and returning errors.
For documenting it, looks like the cpsw-phy-sel is used for all cpsw device
tree nodes. It's missing the related binding documentation, so let's also
update the binding documentation accordingly.
Cc: devicetree@vger.kernel.org
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Murali Karicheri <m-karicheri2@ti.com>
Cc: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The current cpsw usage for cpsw-phy-sel is undocumented but is used for
all the boards using cpsw. And cpsw-phy-sel is not really a child of
the cpsw device, it lives in the system control module instead.
Let's document the existing usage, and improve it a bit where we prefer
to use a phandle instead of a child device for it. That way we can
properly describe the hardware in dts files for things like genpd.
Cc: devicetree@vger.kernel.org
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Murali Karicheri <m-karicheri2@ti.com>
Cc: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hangbin Liu says:
====================
igmp: fix two incorrect unsolicit report count issues
Just like the subject, fix two minor igmp unsolicit report count issues.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
After link down and up, i.e. when call ip_mc_up(), we doesn't init
im->unsolicit_count. So after igmp_timer_expire(), we will not start
timer again and only send one unsolicit report at last.
Fix it by initializing im->unsolicit_count in igmp_group_added(), so
we can respect igmp robustness value.
Fixes: 24803f38a5 ("igmp: do not remove igmp souce list info when set link down")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We should not start timer if im->unsolicit_count equal to 0 after decrease.
Or we will send one more unsolicit report message. i.e. 3 instead of 2 by
default.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently we check sk_user_data is non NULL to determine if the sk
exists in a map. However, this is not sufficient to ensure the psock
or the ULP ops are not in use by another user, such as kcm or TLS. To
avoid this when adding a sock to a map also verify it is of the
correct ULP type. Additionally, when releasing a psock verify that
it is the TCP_ULP_BPF type before releasing the ULP. The error case
where we abort an update due to ULP collision can cause this error
path.
For example,
__sock_map_ctx_update_elem()
[...]
err = tcp_set_ulp_id(sock, TCP_ULP_BPF) <- collides with TLS
if (err) <- so err out here
goto out_free
[...]
out_free:
smap_release_sock() <- calling tcp_cleanup_ulp releases the
TLS ULP incorrectly.
Fixes: 2f857d0460 ("bpf: sockmap, remove STRPARSER map_flags and add multi-map support")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
When listed all maps, bpftool currently shows (null) for xskmap.
Added xskmap type in map_type_name[] to show correct type.
Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Helper bpf_msg_pull_data() mistakenly reuses variable 'offset' while
linearizing multiple scatterlist elements. Variable 'offset' is used
to find first starting scatterlist element
i.e. msg->data = sg_virt(&sg[first_sg]) + start - offset"
Use different variable name while linearizing multiple scatterlist
elements so that value contained in variable 'offset' won't get
overwritten.
Fixes: 015632bb30 ("bpf: sk_msg program helper bpf_sk_msg_pull_data")
Signed-off-by: Tushar Dave <tushar.n.dave@oracle.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
A couple of new helper functions in preparation for some tree wide
clean-ups.
-----BEGIN PGP SIGNATURE-----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=AaKv
-----END PGP SIGNATURE-----
Merge tag 'devicetree-fixes-for-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"A couple of new helper functions in preparation for some tree wide
clean-ups.
I'm sending these new helpers now for rc2 in order to simplify the
dependencies on subsequent cleanups across the tree in 4.20"
* tag 'devicetree-fixes-for-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
of: Add device_type access helper functions
of: add node name compare helper functions
of: add helper to lookup compatible child node
First batch of fixes post-merge window:
- A handful of devicetree changes for i.MX2{3,8} to change over to new
panel bindings. The platforms were moved from legacy framebuffers
to DRM and some development board panels hadn't yet been converted.
- OMAP fixes related to ti-sysc driver conversion fallout, fixing some
register offsets, no_console_suspend fixes, etc.
- Droid4 changes to fix flaky eMMC probing and vibrator DTS mismerge.
- Fixed 0755->0644 permissions on a newly added file.
- Defconfig changes to make ARM Versatile more useful with QEMU
(helps testing).
- Enable defconfig options for new TI SoC platform that was merged this
window (AM6).
-----BEGIN PGP SIGNATURE-----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=Pdac
-----END PGP SIGNATURE-----
Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
"First batch of fixes post-merge window:
- A handful of devicetree changes for i.MX2{3,8} to change over to
new panel bindings. The platforms were moved from legacy
framebuffers to DRM and some development board panels hadn't yet
been converted.
- OMAP fixes related to ti-sysc driver conversion fallout, fixing
some register offsets, no_console_suspend fixes, etc.
- Droid4 changes to fix flaky eMMC probing and vibrator DTS mismerge.
- Fixed 0755->0644 permissions on a newly added file.
- Defconfig changes to make ARM Versatile more useful with QEMU
(helps testing).
- Enable defconfig options for new TI SoC platform that was merged
this window (AM6)"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
arm64: defconfig: Enable TI's AM6 SoC platform
ARM: defconfig: Update the ARM Versatile defconfig
ARM: dts: omap4-droid4: Fix emmc errors seen on some devices
ARM: dts: Fix file permission for am335x-osd3358-sm-red.dts
ARM: imx_v6_v7_defconfig: Select CONFIG_DRM_PANEL_SEIKO_43WVF1G
ARM: mxs_defconfig: Select CONFIG_DRM_PANEL_SEIKO_43WVF1G
ARM: dts: imx23-evk: Convert to the new display bindings
ARM: dts: imx23-evk: Move regulators outside simple-bus
ARM: dts: imx28-evk: Convert to the new display bindings
ARM: dts: imx28-evk: Move regulators outside simple-bus
Revert "ARM: dts: imx7d: Invert legacy PCI irq mapping"
arm: dts: am4372: setup rtc as system-power-controller
ARM: dts: omap4-droid4: fix vibrations on Droid 4
bus: ti-sysc: Fix no_console_suspend handling
bus: ti-sysc: Fix module register ioremap for larger offsets
ARM: OMAP2+: Fix module address for modules using mpu_rt_idx
ARM: OMAP2+: Fix null hwmod for ti-sysc debug
When $DEPMOD is not found, only print a warning instead of exiting
with an error message and error status:
Warning: 'make modules_install' requires /sbin/depmod. Please install it.
This is probably in the kmod package.
Change the Error to a Warning because "not all build hosts for cross
compiling Linux are Linux systems and are able to provide a working
port of depmod, especially at the file patch /sbin/depmod."
I.e., "make modules_install" may be used to copy/install the
loadable modules files to a target directory on a build system and
then transferred to an embedded device where /sbin/depmod is run
instead of it being run on the build system.
Fixes: 934193a654 ("kbuild: verify that $DEPMOD is installed")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: H. Nikolaus Schaller <hns@goldelico.com>
Cc: stable@vger.kernel.org
Cc: Lucas De Marchi <lucas.demarchi@profusion.mobi>
Cc: Lucas De Marchi <lucas.de.marchi@gmail.com>
Cc: Michal Marek <michal.lkml@markovi.net>
Cc: Jessica Yu <jeyu@kernel.org>
Cc: Chih-Wei Huang <cwhuang@linux.org.tw>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Meelis Roos reported a {menu,n}config regression:
"I have libncurses devel package installed in the default system
location (as do 99%+ on actual developers probably) and in this
case, pkg-config is useless. pkg-config is needed only when
libraries and headers are installed in non-default locations but
it is bad to require installation of pkg-config on all the machines
where make menuconfig would be possibly run."
For {menu,n}config, do not use pkg-config if it is not installed.
For {g,x}config, keep checking pkg-config since we really rely on it
for finding the installation paths of the required packages.
Fixes: 4ab3b80159 ("kconfig: check for pkg-config on make {menu,n,g,x}config")
Reported-by: Meelis Roos <mroos@linux.ee>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Meelis Roos <mroos@linux.ee>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Pull x86 fixes from Thomas Gleixner:
"Speculation:
- Make the microcode check more robust
- Make the L1TF memory limit depend on the internal cache physical
address space and not on the CPUID advertised physical address
space, which might be significantly smaller. This avoids disabling
L1TF on machines which utilize the full physical address space.
- Fix the GDT mapping for EFI calls on 32bit PTI
- Fix the MCE nospec implementation to prevent #GP
Fixes and robustness:
- Use the proper operand order for LSL in the VDSO
- Prevent NMI uaccess race against CR3 switching
- Add a lockdep check to verify that text_mutex is held in
text_poke() functions
- Repair the fallout of giving native_restore_fl() a prototype
- Prevent kernel memory dumps based on usermode RIP
- Wipe KASAN shadow stack before rewinding the stack to prevent false
positives
- Move the AMS GOTO enforcement to the actual build stage to allow
user API header extraction without a compiler
- Fix a section mismatch introduced by the on demand VDSO mapping
change
Miscellaneous:
- Trivial typo, GCC quirk removal and CC_SET/OUT() cleanups"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/pti: Fix section mismatch warning/error
x86/vdso: Fix lsl operand order
x86/mce: Fix set_mce_nospec() to avoid #GP fault
x86/efi: Load fixmap GDT in efi_call_phys_epilog()
x86/nmi: Fix NMI uaccess race against CR3 switching
x86: Allow generating user-space headers without a compiler
x86/dumpstack: Don't dump kernel memory based on usermode RIP
x86/asm: Use CC_SET()/CC_OUT() in __gen_sigismember()
x86/alternatives: Lockdep-enforce text_mutex in text_poke*()
x86/entry/64: Wipe KASAN stack shadow before rewind_stack_do_exit()
x86/irqflags: Mark native_restore_fl extern inline
x86/build: Remove jump label quirk for GCC older than 4.5.2
x86/Kconfig: Fix trivial typo
x86/speculation/l1tf: Increase l1tf memory limit for Nehalem+
x86/spectre: Add missing family 6 check to microcode check
Pull CPU hotplug fix from Thomas Gleixner:
"Remove the stale skip_onerr member from the hotplug states"
* 'smp-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
cpu/hotplug: Remove skip_onerr field from cpuhp_step structure
Manasi Navare