Commit graph

56 commits

Author SHA1 Message Date
Andy Shevchenko
ea32cea140 power: ab8500: convert to use match_string() helper
The new helper returns index of the mathing string in an array.  We
would use it here.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-17 15:09:34 -07:00
Krzysztof Kozlowski
297d716f62 power_supply: Change ownership from driver to core
Change the ownership of power_supply structure from each driver
implementing the class to the power supply core.

The patch changes power_supply_register() function thus all drivers
implementing power supply class are adjusted.

Each driver provides the implementation of power supply. However it
should not be the owner of power supply class instance because it is
exposed by core to other subsystems with power_supply_get_by_name().
These other subsystems have no knowledge when the driver will unregister
the power supply. This leads to several issues when driver is unbound -
mostly because user of power supply accesses freed memory.

Instead let the core own the instance of struct 'power_supply'.  Other
users of this power supply will still access valid memory because it
will be freed when device reference count reaches 0. Currently this
means "it will leak" but power_supply_put() call in next patches will
solve it.

This solves invalid memory references in following race condition
scenario:

Thread 1: charger manager
Thread 2: power supply driver, used by charger manager

THREAD 1 (charger manager)         THREAD 2 (power supply driver)
==========================         ==============================
psy = power_supply_get_by_name()
                                   Driver unbind, .remove
                                     power_supply_unregister()
                                     Device fully removed
psy->get_property()

The 'get_property' call is executed in invalid context because the driver was
unbound and struct 'power_supply' memory was freed.

This could be observed easily with charger manager driver (here compiled
with max17040 fuel gauge):

$ cat /sys/devices/virtual/power_supply/cm-battery/capacity &
$ echo "1-0036" > /sys/bus/i2c/drivers/max17040/unbind
[   55.725123] Unable to handle kernel NULL pointer dereference at virtual address 00000000
[   55.732584] pgd = d98d4000
[   55.734060] [00000000] *pgd=5afa2831, *pte=00000000, *ppte=00000000
[   55.740318] Internal error: Oops: 80000007 [#1] PREEMPT SMP ARM
[   55.746210] Modules linked in:
[   55.749259] CPU: 1 PID: 2936 Comm: cat Tainted: G        W       3.19.0-rc1-next-20141226-00048-gf79f475f3c44-dirty #1496
[   55.760190] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree)
[   55.766270] task: d9b76f00 ti: daf54000 task.ti: daf54000
[   55.771647] PC is at 0x0
[   55.774182] LR is at charger_get_property+0x2f4/0x36c
[   55.779201] pc : [<00000000>]    lr : [<c034b0b4>]    psr: 60000013
[   55.779201] sp : daf55e90  ip : 00000003  fp : 00000000
[   55.790657] r10: 00000000  r9 : c06e2878  r8 : d9b26c68
[   55.795865] r7 : dad81610  r6 : daec7410  r5 : daf55ebc  r4 : 00000000
[   55.802367] r3 : 00000000  r2 : daf55ebc  r1 : 0000002a  r0 : d9b26c68
[   55.808879] Flags: nZCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment user
[   55.815994] Control: 10c5387d  Table: 598d406a  DAC: 00000015
[   55.821723] Process cat (pid: 2936, stack limit = 0xdaf54210)
[   55.827451] Stack: (0xdaf55e90 to 0xdaf56000)
[   55.831795] 5e80:                                     60000013 c01459c4 0000002a c06f8ef8
[   55.839956] 5ea0: db651000 c06f8ef8 daebac00 c04cb668 daebac08 c0346864 00000000 c01459c4
[   55.848115] 5ec0: d99eaa80 c06f8ef8 00000fff 00001000 db651000 c027f25c c027f240 d99eaa80
[   55.856274] 5ee0: d9a06c00 c0146218 daf55f18 00001000 d99eaa80 db4c18c0 00000001 00000001
[   55.864468] 5f00: daf55f80 c0144c78 c0144c54 c0107f90 00015000 d99eaab0 00000000 00000000
[   55.872603] 5f20: 000051c7 00000000 db4c18c0 c04a9370 00015000 00001000 daf55f80 00001000
[   55.880763] 5f40: daf54000 00015000 00000000 c00e53dc db4c18c0 c00e548c 0000000d 00008124
[   55.888937] 5f60: 00000001 00000000 00000000 db4c18c0 db4c18c0 00001000 00015000 c00e5550
[   55.897099] 5f80: 00000000 00000000 00001000 00001000 00015000 00000003 00000003 c000f364
[   55.905239] 5fa0: 00000000 c000f1a0 00001000 00015000 00000003 00015000 00001000 0001333c
[   55.913399] 5fc0: 00001000 00015000 00000003 00000003 00000002 00000000 00000000 00000000
[   55.921560] 5fe0: 7fffe000 be999850 0000a225 b6f3c19c 60000010 00000003 00000000 00000000
[   55.929744] [<c034b0b4>] (charger_get_property) from [<c0346864>] (power_supply_show_property+0x48/0x20c)
[   55.939286] [<c0346864>] (power_supply_show_property) from [<c027f25c>] (dev_attr_show+0x1c/0x48)
[   55.948130] [<c027f25c>] (dev_attr_show) from [<c0146218>] (sysfs_kf_seq_show+0x84/0x104)
[   55.956298] [<c0146218>] (sysfs_kf_seq_show) from [<c0144c78>] (kernfs_seq_show+0x24/0x28)
[   55.964536] [<c0144c78>] (kernfs_seq_show) from [<c0107f90>] (seq_read+0x1b0/0x484)
[   55.972172] [<c0107f90>] (seq_read) from [<c00e53dc>] (__vfs_read+0x18/0x4c)
[   55.979188] [<c00e53dc>] (__vfs_read) from [<c00e548c>] (vfs_read+0x7c/0x100)
[   55.986304] [<c00e548c>] (vfs_read) from [<c00e5550>] (SyS_read+0x40/0x8c)
[   55.993164] [<c00e5550>] (SyS_read) from [<c000f1a0>] (ret_fast_syscall+0x0/0x48)
[   56.000626] Code: bad PC value
[   56.011652] ---[ end trace 7b64343fbdae8ef1 ]---

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>

[for the nvec part]
Reviewed-by: Marc Dietrich <marvin24@gmx.de>

[for compal-laptop.c]
Acked-by: Darren Hart <dvhart@linux.intel.com>

[for the mfd part]
Acked-by: Lee Jones <lee.jones@linaro.org>

[for the hid part]
Acked-by: Jiri Kosina <jkosina@suse.cz>

[for the acpi part]
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-03-13 23:15:51 +01:00
Krzysztof Kozlowski
15077fc1f7 power_supply: ab8500: Use power_supply_*() API for accessing function attrs
Replace direct calls to power supply function attributes with wrappers.
Wrappers provide safe access in case of unregistering the power
supply (e.g. by removing the driver). Replace:
 - get_property -> power_supply_get_property

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: Jonghwa Lee <jonghwa3.lee@samsung.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Reviewed-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-03-13 23:15:49 +01:00
Krzysztof Kozlowski
2dc9215d7c power_supply: Move run-time configuration to separate structure
Add new structure 'power_supply_config' for holding run-time
initialization data like of_node, supplies and private driver data.

The power_supply_register() function is changed so all power supply
drivers need updating.

When registering the power supply this new 'power_supply_config' should be
used instead of directly initializing 'struct power_supply'. This allows
changing the ownership of power_supply structure from driver to the
power supply core in next patches.

When a driver does not use of_node or supplies then it should use NULL
as config. If driver uses of_node or supplies then it should allocate
config on stack and initialize it with proper values.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Acked-by: Pavel Machek <pavel@ucw.cz>

[for the nvec part]
Reviewed-by: Marc Dietrich <marvin24@gmx.de>

[for drivers/platform/x86/compal-laptop.c]
Reviewed-by: Darren Hart <dvhart@linux.intel.com>

[for drivers/hid/*]
Reviewed-by: Jiri Kosina <jkosina@suse.cz>

Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-03-13 23:15:12 +01:00
Valentin Rothberg
02232be7a2 ab8500_fg.c: only request threaded IRQs when necessary
All 5 IRQ handlers of the driver are requested as threaded interrupt
handlers.  However, only 1 handler can block.  The remaining 4 handlers
defer the actual handling to a workqueue.  Hence, 4 of 5 IRQ handlers
have a considerable overhead, since they are executed in a kernel thread
to schedule another kernel thread (workqueue).

This change splits up the 5 interrupt handlers into top halves (_th) and
bottom halves (_bh) and resolves the aforementioned overhead by only
requesting threaded interrupts (i.e., bottom halves) when necessary.

Signed-off-by: Valentin Rothberg <Valentin.Rothberg@lip6.fr>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-03-07 20:32:22 +01:00
Nicholas Mc Guire
298631e1ec ab8500_fg: use jiffies_to_msecs for jiffies conversion
Converting jiffies to milliseconds by "val * 1000 / HZ" is technically
OK but jiffies_to_msecs(val) is the cleaner solution and handles all
corner cases correctly. This is a minor API consolidation only and
should make things more readable.

Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-02-25 22:47:12 +01:00
Nicholas Mc Guire
5ae6e2a8f8 ab8500_fg: match return type of wait_for_completion_timeout
return type of wait_for_completion_timeout is unsigned long not int. as
timeout is used for wait_for_completion_timeout exclusively here its
type is simply changed to unsigned long.

Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-02-25 22:47:12 +01:00
Krzysztof Kozlowski
c75cfa9e27 power_supply: ab8500_fg: Simplify creation and removal of sysfs entries
Simplify a little ab8500_fg_sysfs_psy_create_attrs () and
ab8500_fg_sysfs_psy_remove_attrs() functions because they received
pointer to power supply device which was then converted into power
supply instance. Then it was converted into struct ab8500_fg. The path
looked like:
	ab8500_fg->psy.dev -> psy -> ab8500_fg

Instead just pass pointer to struct ab8500_fg directly so all
conversions won't be necessary.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-02-25 22:26:32 +01:00
Rickard Strandqvist
85cdf36e11 power: ab8500_fg.c: Remove unused function
Remove the function ab8500_fg_reinit() that is not used anywhere.

This was partially found by using a static code analysis program called cppcheck.

Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-01-21 14:06:48 +01:00
Linus Torvalds
e6b5be2be4 Driver core patches for 3.19-rc1
Here's the set of driver core patches for 3.19-rc1.
 
 They are dominated by the removal of the .owner field in platform
 drivers.  They touch a lot of files, but they are "simple" changes, just
 removing a line in a structure.
 
 Other than that, a few minor driver core and debugfs changes.  There are
 some ath9k patches coming in through this tree that have been acked by
 the wireless maintainers as they relied on the debugfs changes.
 
 Everything has been in linux-next for a while.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iEYEABECAAYFAlSOD20ACgkQMUfUDdst+ylLPACg2QrW1oHhdTMT9WI8jihlHVRM
 53kAoLeteByQ3iVwWurwwseRPiWa8+MI
 =OVRS
 -----END PGP SIGNATURE-----

Merge tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core update from Greg KH:
 "Here's the set of driver core patches for 3.19-rc1.

  They are dominated by the removal of the .owner field in platform
  drivers.  They touch a lot of files, but they are "simple" changes,
  just removing a line in a structure.

  Other than that, a few minor driver core and debugfs changes.  There
  are some ath9k patches coming in through this tree that have been
  acked by the wireless maintainers as they relied on the debugfs
  changes.

  Everything has been in linux-next for a while"

* tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (324 commits)
  Revert "ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries"
  fs: debugfs: add forward declaration for struct device type
  firmware class: Deletion of an unnecessary check before the function call "vunmap"
  firmware loader: fix hung task warning dump
  devcoredump: provide a one-way disable function
  device: Add dev_<level>_once variants
  ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries
  ath: use seq_file api for ath9k debugfs files
  debugfs: add helper function to create device related seq_file
  drivers/base: cacheinfo: remove noisy error boot message
  Revert "core: platform: add warning if driver has no owner"
  drivers: base: support cpu cache information interface to userspace via sysfs
  drivers: base: add cpu_device_create to support per-cpu devices
  topology: replace custom attribute macros with standard DEVICE_ATTR*
  cpumask: factor out show_cpumap into separate helper function
  driver core: Fix unbalanced device reference in drivers_probe
  driver core: fix race with userland in device_add()
  sysfs/kernfs: make read requests on pre-alloc files use the buffer.
  sysfs/kernfs: allow attributes to request write buffer be pre-allocated.
  fs: sysfs: return EGBIG on write if offset is larger than file size
  ...
2014-12-14 16:10:09 -08:00
Wolfram Sang
816c44c369 power: drop owner assignment from platform_drivers
A platform_driver does not need to set an owner, it will be populated by the
driver core.

Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-10-20 16:21:27 +02:00
Ebru Akagunduz
8000ebf762 power: ab8500_fg.c: use 64-bit time types
This patch changes 32-bit time types to 64-bit in
drivers/power/ab8500_fg.c

timespec and time_t can only represent signed 32-bit
dates but the driver should represent dates that are
after January 2038. So used time64.h header file and
its proper types and functions.

Use time64_t type instead of __kernel_time_t for
time_stamps variable of ab8500_fg_avg_cap struct

Signed-off-by: Ebru Akagunduz <ebru.akagunduz@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
2014-10-15 10:37:05 +02:00
Guenter Roeck
7881c64716 power: ab8500_fg: Fix build warning
Fix

drivers/power/ab8500_fg.c: In function 'ab8500_fg_probe':
drivers/power/ab8500_fg.c:2989:27:
		warning: 'i' may be used uninitialized in this function
drivers/power/ab8500_fg.c:2972:15: note: 'i' was declared here

which actually points to a real bug.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
2014-10-05 02:10:20 +02:00
Wolfram Sang
16735d022f tree-wide: use reinit_completion instead of INIT_COMPLETION
Use this new function to make code more comprehensible, since we are
reinitialzing the completion, not initializing.

[akpm@linux-foundation.org: linux-next resyncs]
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org> (personally at LCE13)
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-15 09:32:21 +09:00
Jingoo Han
4b43eb67ae power_supply: Replace strict_strtoul() with kstrtoul()
The usage of strict_strtoul() is not preferred, because strict_strtoul()
is obsolete. Thus, kstrtoul() should be used.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-06-06 17:35:38 -07:00
Jingoo Han
ddeeb8f973 ab8500_bm: Remove unnecessary platform_set_drvdata()
The driver core clears the driver data to NULL after device_release or on
probe failure, since commit 0998d06310
(device-core: Ensure drvdata = NULL when no driver is bound). Thus, it is
not needed to manually clear the device driver data to NULL.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-06-06 17:13:09 -07:00
Hongbo Zhang
2c89940786 ab8500_{bmdata,fg}: Add const attributes to some data arrays
This patch adds const attributes to AB8500 power and temperature related
read-only data arrays.

Signed-off-by: Hongbo Zhang <hongbo.zhang@linaro.org>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-04-16 17:34:36 -07:00
lme00437
0577610e0e ab8500-fg: Change current calculation
This patch updates the gas gauge constant for electric current
calculation according to hardware specification.

Signed-off-by: Benoit GAUTHIER <benoit.gauthier-xsig@stericsson.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Marcus COOPER <marcus.xm.cooper@stericsson.com>
Reviewed-by: Philippe LANGLAIS <philippe.langlais@stericsson.com>
Tested-by: Benoit GAUTHIER <benoit.gauthier-xsig@stericsson.com>
2013-03-07 12:35:59 +08:00
Marcus Cooper
7a2cf9bacf ab8500-bm: Trivially fix up some incorrect and out-of-date comments
Some of the comments in the ab8500 drivers reflect the behaviour
of the original device. As this driver now supports newer devices
then these comments are now redundant. Also some IRQ comments are
incorrect.

Signed-off-by: Marcus Cooper <marcus.xm.cooper@stericsson.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Rabin VINCENT <rabin.vincent@stericsson.com>
Tested-by: Rabin VINCENT <rabin.vincent@stericsson.com>
2013-03-07 12:35:56 +08:00
Lee Jones
3c01b3676f ab8500-charger: Remove duplicate code
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-03-07 12:35:54 +08:00
Hakan Berg
642776182c ab8500-fg: Allow capacity to raise from 1% when charging
When battery capacity was going below 1% fg is not supposed
to report 0% unless we've got the LOW_BAT IRQ, no matter
what the FG-algorithm says. This made fg get stuck at 1% if
charger is connected when capacity is 1%.

Signed-off-by: Hakan BERG <hakan.berg@stericsson.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Marcus COOPER <marcus.xm.cooper@stericsson.com>
Reviewed-by: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
2013-03-07 12:35:44 +08:00
Martin Bergstrom
e82c5bdbf3 ab8500-fg: Report unscaled capacity
Unscaled capacity should be reported for POWER_SUPPLY_PROP_CAPACITY.

Signed-off-by: Martin Bergstrom <martin.bergstrom@stericsson.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Marcus COOPER <marcus.xm.cooper@stericsson.com>
Tested-by: Jonas ABERG <jonas.aberg@stericsson.com>
2013-03-07 12:35:36 +08:00
Lee Jones
93ff722e88 ab8500-fg: Add power cut feature for ab8505 and ab8540
Add support for a power cut feature which allows user to
configure when ab8505 and ab8540 based platforms should shut
down system due to low battery.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-03-07 12:35:36 +08:00
Rajkumar Kasirajan
1a793a1089 ab8500-fg: Use correct battery charge full design
If battery is not identified while fg probe, mah_max_design gets
initialized with unknown battery's charge full design. Reinitialize
mah_max_design if battery is identified after fg probe.

Signed-off-by: Rajkumar Kasirajan <rajkumar.kasirajan@stericsson.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Vijaya Kumar K-1 <vijay.kilari@stericsson.com>
Reviewed-by: Marcus COOPER <marcus.xm.cooper@stericsson.com>
Reviewed-by: Olivier CLERGEAUD <olivier.clergeaud@stericsson.com>
Reviewed-by: Arun MURTHY <arun.murthy@stericsson.com>
Reviewed-by: Rabin VINCENT <rabin.vincent@stericsson.com>
Tested-by: Rupesh KUMAR <rupesh.kumar@stericsson.com>
Tested-by: Jonas ABERG <jonas.aberg@stericsson.com>
2013-01-23 14:39:20 +00:00
Jonas Aaberg
53ef1f590d ab8500-bm: Flush all work queues before suspending
Flush all workqueues at suspend time to avoid suspending during work.

Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Marcus COOPER <marcus.xm.cooper@stericsson.com>
2013-01-23 14:39:18 +00:00
Martin Bergström
ffaa39d9ed ab8500-fg: Go to INIT_RECOVERY when charger removed
When the charger is removed we need to go to INIT_RECOVERY
state instead of directly to RECOVERY state.

Signed-off-by: Martin Bergstrom <martin.bergstrom@stericsson.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Marcus COOPER <marcus.xm.cooper@stericsson.com>
Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
Tested-by: Jonas ABERG <jonas.aberg@stericsson.com>
2013-01-23 14:39:17 +00:00
Hakan Berg
75f2a219ff ab8500-fg: Adjust for RF bursts voltage drops
Changed conditions for restarting low battery measurements counter
and adjusted the interval between measurements to avoid RF burst
induced voltage drops, and to shorten time to decide to shut down.

Signed-off-by: Hakan Berg <hakan.berg@stericsson.com>
Signed-off-by: Martin Bergstrom <martin.bergstrom@stericsson.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
Reviewed-by: Marcus COOPER <marcus.xm.cooper@stericsson.com>
2013-01-23 11:33:03 +00:00
Lee Jones
41ce25657b ab8500_fg: Remove pointless round_jiffies() call
As HZ is a full-second, there is little point in rounding it.
Let's save a few cycles by using HZ directly.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-01-15 17:44:46 -08:00
Paer-Olof Haakansson
f902dadc12 ab8500_fg: Overflow in current calculation
When calculating the average current the nominator will
overflow when the charging current is high.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Henrik Sölver <henrik.solver@stericsson.com>
Reviewed-by: Par-Olof HAKANSSON <par-olof.hakansson@stericsson.com>
Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
Tested-by: Par-Olof HAKANSSON <par-olof.hakansson@stericsson.com>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-01-15 17:44:44 -08:00
Hakan Berg
8bcf3b39a8 ab8500_fg: Added support for BATT_OVV
Add support for the battery over-voltage situation

Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Hakan Berg <hakan.berg@stericsson.com>
Reviewed-by: Karl KOMIEROWSKI <karl.komierowski@stericsson.com>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-01-15 17:44:38 -08:00
pender01
6eaf8740da ab8500_fg: Round capacity output
Round the capacity values for better enduser experience.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: pender01 <peter.enderborg@stericsson.com>
Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
Tested-by: Marcus COOPER <marcus.xm.cooper@stericsson.com>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-01-15 17:44:34 -08:00
Rickard Andersson
129d583b44 ab8500_fg: Balance IRQ enable
In case of time out error IRQ needs to be disabled
otherwise we will get unbalanced enable/disable pairs.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Rickard Andersson <rickard.andersson@stericsson.com>
Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-01-15 17:44:26 -08:00
Marcus Cooper
ea40240178 ab8500_bm: Recharge condition not optimal for battery
Today the battery recharge is determined with a voltage threshold. This
voltage threshold is only valid when the battery is relaxed. In charging
algorithm the voltage read is the loaded battery voltage and no
compensation is done to get the relaxed voltage. When maintenance
charging is not selected, this makes the recharging condition to almost
immediately activate when there is a discharge present on the battery.

Depending on which vendor the battery comes from this behavior can wear
out the battery much faster than normal.

The fuelgauge driver is responsible to monitor the actual battery
capacity and is able to estimate the remaining capacity. It is better to
use the remaining capacity as a limit to determine when battery should
be recharged.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Marcus Cooper <marcus.xm.cooper@stericsson.com>
Reviewed-by: Hakan BERG <hakan.berg@stericsson.com>
Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-01-15 17:43:46 -08:00
Jonas Aaberg
9a0bd070fd ab8500_fg: Replace msleep() with usleep_range() for greater accuracy
Doing so provides a greater degree of accuracy when dealing with
time-frames between 1us and 20ms. msleep() is only accurate for
wake-ups greater than 20ms.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jonas ABERG <jonas.aberg@stericsson.com>
Reviewed-by: Johan BJORNSTEDT <johan.bjornstedt@stericsson.com>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-01-15 17:35:19 -08:00
Johan Bjornstedt
3988a4df34 ab8500_bm: Skip first CCEOC irq for instant current
When enabling the CCEOC irq we might get false interrupt
from ab8500-driver due to the latched value will be saved
and interpreted as an IRQ when enabled

Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Johan Bjornstedt <johan.bjornstedt@stericsson.com>
Signed-off-by: Henrik Solver <henrik.solver@stericsson.com>
Reviewed-by: Karl KOMIEROWSKI <karl.komierowski@stericsson.com>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-01-15 17:10:17 -08:00
Anton Vorontsov
240fbe2347 Merge branch 'for-anton' of git://git.linaro.org/people/ljones/linux-3.0-ux500 2013-01-05 17:14:22 -08:00
Anton Vorontsov
76d8a23b12 Merge git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux
The merge is merely to fix conflicts before sending a pull request.

Conflicts:
	drivers/power/ab8500_btemp.c
	drivers/power/ab8500_charger.c
	drivers/power/ab8500_fg.c
	drivers/power/abx500_chargalg.c
	drivers/power/max8925_power.c

Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-12-11 22:15:57 -08:00
Lee Jones
195c1c660c ab8500_fg: Reorder obtainment of platform specific battery management data
Now that we always pass platform specific battery management data
through platform_data instead of obtaining it via different means
depending the way be boot the system (DT or ATAGs); we need to
re-jiggle the way we acquire it in the driver start-up functions.
Now it is wrong for it to be missing, but we still allow Device
Tree code to fiddle with it once we've confirmed it's there.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-12-11 08:43:55 +00:00
Lee Jones
23a04f9f40 ab8500_bm: Always send platform specific battery information via pdata
Currently the AB8500 battery management subsystem receives platform
specific information via two different means depending on how the
platform is booted. If DT is not enabled, a reference to a *_bm_data
data structure containing each platform specific attribute is passed
though platform_data. However, if DT is enabled, then platform_data
is empty and the reference is gained though a DT specific probe
function. There are two issues here 1) the same reference is
being collected each time and 2) the DT way doesn't allow any
provisions to select different platform specific attributes, which
kind of defeats the object.

Cc: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-12-11 08:43:54 +00:00
Lee Jones
b0284de05e ab8500_bm: Rename battery management platform data to something more logical
The platform specific battery management configuration data structure
is currently called 'bat' short for 'battery'; however, it contains
information for all components of the battery management group, rather
than information pertaining to the battery itself - there are other
structures for that. So, in keeping with its structure namesake
'abx500_bm_data', we rename it to 'bm' here. Using similar logic,
we're also renaming 'bmdevs_of_probe' to the more device specific
'ab8500_bm_of_probe'.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-12-11 08:43:53 +00:00
Kalle Komierowski
e32ad07cea ab8500_fg: Don't clear the CCMuxOffset bit
The CCMuxOffset bit is not kept set. This will force the
columb counter of the AB8500 to use the measure offset
calibration. This should increase the accuracy of the fuel
gauge.

Signed-off-by: Kalle Komierowski <karl.komierowski@stericsson.com>
Signed-off-by: Marcus Cooper <marcus.xm.cooper@stericsson.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
2012-12-11 08:43:52 +00:00
Bill Pemberton
415ec69fb1 power: remove use of __devexit
CONFIG_HOTPLUG is going away as an option so __devexit is no
longer needed.

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Cc: Anton Vorontsov <cbou@mail.ru>
Cc: David Woodhouse <dwmw2@infradead.org>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-28 11:43:22 -08:00
Bill Pemberton
c8afa6406e power: remove use of __devinit
CONFIG_HOTPLUG is going away as an option so __devinit is no longer
needed.

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Cc: Anton Vorontsov <cbou@mail.ru>
Cc: David Woodhouse <dwmw2@infradead.org>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-28 11:43:22 -08:00
Bill Pemberton
28ea73f4c6 power: remove use of __devexit_p
CONFIG_HOTPLUG is going away as an option so __devexit_p is no longer
needed.

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Cc: Anton Vorontsov <cbou@mail.ru>
Cc: David Woodhouse <dwmw2@infradead.org>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-28 11:43:22 -08:00
Rajanikanth H.V
e0f1abeba5 ab8500: Add devicetree support for fuelgauge
- This patch adds device tree support for fuelgauge driver
- optimize bm devices platform_data usage and of_probe(...)
  Note: of_probe() routine for battery managed devices is made
  common across all bm drivers.
- test status:
  - interrupt numbers assigned differs between legacy and FDT mode.

Signed-off-by: Rajanikanth H.V <rajanikanth.hv@stericsson.com>
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-11-18 19:37:04 -08:00
Linus Torvalds
e665faa424 1. New drivers:
- Marvell 88pm860x charger and battery drivers;
    - Texas Instruments LP8788 charger driver;
 2. Two new power supply properties: whether a battery is authentic, and
    chargers' maximal currents and voltages;
 3. A lot of TI LP8727 Charger cleanups;
 4. New features for Charger Manager, mainly now we can disable specific
    regulators;
 5. Random fixes and cleanups for other drivers.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iQIcBAABAgAGBQJQbjMFAAoJEGgI9fZJve1bR6gP/2Ri0etCU5zQMmbsFv5wxwHT
 BNgqFYoLmtxAJm7afM/9Qo2GxSam/Gi6vW6jfYxVOEDt9hJ5zaaJBxM4XmKEBShR
 PYlV9u45jGUCIHJXoi8DTND9Swz0VfVve9UtK5fVdXr73fYFemP8U86alI1MBL5Q
 8U3F0V8rObjGKWZrzN4BreB8bfbZYQCUafpoGS1ids3Uwm38d4tDb/jx8guSV24D
 LEhXy9unV9NdPExRn1FWFAgqjtgnnBv5SmpCBd6VwKNmpOgVB+H0CjOaOPzMgd+0
 X6dpJQtbjGZOhHhkcAoWsXYgxS8WMtTqlSjHSgswJJ/fdjv8YJoT7ncyu5wItY1x
 cN5NRBKVpnHv+fkQDE4xVWzEOH68lK8RoGksay0gvTJj3MQWwOpOANGHbsnMG6rj
 GBzQ7pyMbDTK7n1oynvmSskF4BdvYHM+Ns7vPUOAzoduKrOnhPVDpk3rLSFZxQNO
 RoqXbnNYqg4qROB9z8Drs95WD59fKjNTlfFr1moR2sr4wncEJiFduMz4dCOs7nq7
 ahZxd95a2Bb6LbcN244+loGBXmx6KD6BurrDc3yTM3hl+oVx+MecVv9uoKvKlz4y
 YPh9XrdCSfj9Ms7TOqW8XPDl/ZREswaCIer7x8XsL+K42fYkPKlrO3OUMHIbh+3e
 rfkFPAR55bLcmtiaahp3
 =LkdH
 -----END PGP SIGNATURE-----

Merge tag 'for-v3.7' of git://git.infradead.org/battery-2.6

Pull battery updates from Anton Vorontsov:
 "1. New drivers:
     - Marvell 88pm860x charger and battery drivers;
     - Texas Instruments LP8788 charger driver;
  2. Two new power supply properties: whether a battery is authentic,
     and chargers' maximal currents and voltages;
  3. A lot of TI LP8727 Charger cleanups;
  4. New features for Charger Manager, mainly now we can disable
     specific regulators;
  5. Random fixes and cleanups for other drivers."

Fix up trivial conflicts in <linux/mfd/88pm860x.h>

* tag 'for-v3.7' of git://git.infradead.org/battery-2.6: (52 commits)
  pda_power: Remove ac_draw_failed goto and label
  charger-manager: Add support sysfs entry for charger
  charger-manager: Support limit of maximum possible
  charger-manager: Check fully charged state of battery periodically
  lp8727_charger: More pure cosmetic improvements
  lp8727_charger: Fix checkpatch warning
  lp8727_charger: Add description in the private data
  lp8727_charger: Fix a typo - chg_parm to chg_param
  lp8727_charger: Make some cosmetic changes in lp8727_delayed_func()
  lp8727_charger: Clean up lp8727_charger_changed()
  lp8727_charger: Return if the battery is discharging
  lp8727_charger: Make lp8727_charger_get_propery() simpler
  lp8727_charger: Make lp8727_ctrl_switch() inline
  lp8727_charger: Make lp8727_init_device() shorter
  lp8727_charger: Clean up lp8727_is_charger_attached()
  lp8727_charger: Use specific definition
  lp8727_charger: Clean up lp8727 definitions
  lp8727_charger: Use the definition rather than enum
  lp8727_charger: Fix code for getting battery temp
  lp8727_charger: Clear interrrupts at inital time
  ...
2012-10-07 17:29:24 +09:00
Julia Lawall
d2941651d7 ab8500_fg: Fix error return code
Initialize return variable before exiting on an error path.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
(
if@p1 (\(ret < 0\|ret != 0\))
 { ... return ret; }
|
ret@p1 = 0
)
... when != ret = e1
    when != &ret
*if(...)
{
  ... when != ret = e2
      when forall
 return ret;
}

// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-08-22 18:48:01 -07:00
Tejun Heo
203b42f731 workqueue: make deferrable delayed_work initializer names consistent
Initalizers for deferrable delayed_work are confused.

* __DEFERRED_WORK_INITIALIZER()
* DECLARE_DEFERRED_WORK()
* INIT_DELAYED_WORK_DEFERRABLE()

Rename them to

* __DEFERRABLE_WORK_INITIALIZER()
* DECLARE_DEFERRABLE_WORK()
* INIT_DEFERRABLE_WORK()

This patch doesn't cause any functional changes.

Signed-off-by: Tejun Heo <tj@kernel.org>
2012-08-21 13:18:23 -07:00
Lee Jones
2aac3de19b ab8500: Clean up probe routines
These patches clean up some ugliness and brings the variable
initialisation formatting more into line with other drivers.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-05-05 04:55:50 -07:00
Linus Walleij
5f98eb393c ab8500_fg: Harden platform data check
If no platform data at all is supplied the driver crashes,
extend the checks to be more careful so we can compile in the
driver and boot also without platform data present.

Acked-by: Arun Murthy <arun.murthy@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-05-05 03:59:56 -07:00