[ Upstream commit f85196bdd5 ]
BCM4752 and LNV4752 ACPI nodes describe a Broadcom 4752 GPS module
attached to an UART of the system.
The GPS modules talk a custom protocol which only works with a closed-
source Android gpsd daemon which knows this protocol.
The ACPI nodes also describe GPIOs to turn the GPS on/off these are
handled by the net/rfkill/rfkill-gpio.c code. This handling predates the
addition of enumeration of ACPI instantiated serdevs to the kernel and
was broken by that addition, because the ACPI scan code now no longer
instantiates platform_device-s for these nodes.
Rename the i2c_multi_instantiate_ids HID list to ignore_serial_bus_ids
and add the BCM4752 and LNV4752 HIDs, so that rfkill-gpio gets
a platform_device to bind to again; and so that a tty cdev for gpsd
gets created for these.
Fixes: e361d1f858 ("ACPI / scan: Fix enumeration for special UART devices")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4a9af6cac0 ]
The flushing of pending work in the EC driver uses drain_workqueue()
to flush the event handling work that can requeue itself via
advance_transaction(), but this is problematic, because that
work may also be requeued from the query workqueue.
Namely, if an EC transaction is carried out during the execution of
a query handler, it involves calling advance_transaction() which
may queue up the event handling work again. This causes the kernel
to complain about attempts to add a work item to the EC event
workqueue while it is being drained and worst-case it may cause a
valid event to be skipped.
To avoid this problem, introduce two new counters, events_in_progress
and queries_in_progress, incremented when a work item is queued on
the event workqueue or the query workqueue, respectively, and
decremented at the end of the corresponding work function, and make
acpi_ec_dispatch_gpe() the workqueues in a loop until the both of
these counters are zero (or system wakeup is pending) instead of
calling acpi_ec_flush_work().
At the same time, change __acpi_ec_flush_work() to call
flush_workqueue() instead of drain_workqueue() to flush the event
workqueue.
While at it, use the observation that the work item queued in
acpi_ec_query() cannot be pending at that time, because it is used
only once, to simplify the code in there.
Additionally, clean up a comment in acpi_ec_query() and adjust white
space in acpi_ec_event_processor().
Fixes: f0ac20c3f6 ("ACPI: EC: Fix flushing of pending work")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 009a789443 ]
The handling of PMIC register reads through writing 0 to address 4
of the OpRegion is wrong. Instead of returning the read value
through the value64, which is a no-op for function == ACPI_WRITE calls,
store the value and then on a subsequent function == ACPI_READ with
address == 3 (the address for the value field of the OpRegion)
return the stored value.
This has been tested on a Xiaomi Mi Pad 2 and makes the ACPI battery dev
there mostly functional (unfortunately there are still other issues).
Here are the SET() / GET() functions of the PMIC ACPI device,
which use this OpRegion, which clearly show the new behavior to
be correct:
OperationRegion (REGS, 0x8F, Zero, 0x50)
Field (REGS, ByteAcc, NoLock, Preserve)
{
CLNT, 8,
SA, 8,
OFF, 8,
VAL, 8,
RWM, 8
}
Method (GET, 3, Serialized)
{
If ((AVBE == One))
{
CLNT = Arg0
SA = Arg1
OFF = Arg2
RWM = Zero
If ((AVBG == One))
{
GPRW = Zero
}
}
Return (VAL) /* \_SB_.PCI0.I2C7.PMI5.VAL_ */
}
Method (SET, 4, Serialized)
{
If ((AVBE == One))
{
CLNT = Arg0
SA = Arg1
OFF = Arg2
VAL = Arg3
RWM = One
If ((AVBG == One))
{
GPRW = One
}
}
}
Fixes: 0afa877a56 ("ACPI / PMIC: intel: add REGS operation region support")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2835f327bd ]
Some buggy firmware and/or brand new batteries can support a charge that's
slightly over the reported design capacity. In such cases, the kernel will
report to userspace that the charging state of the battery is "Unknown",
when in reality the battery charge is "Full", at least from the design
capacity point of view. Make the fallback condition accepts capacities
over the designed capacity so userspace knows that is full.
Signed-off-by: André Almeida <andrealmeid@collabora.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d3c4b6f64a ]
ACPICA commit 0762982923f95eb652cf7ded27356b247c9774de
During wakeup from system-wide sleep states, acpi_get_sleep_type_data()
is called and it tries to get memory from the slab allocator in order
to evaluate a control method, but if KFENCE is enabled in the kernel,
the memory allocation attempt causes an IRQ work to be queued and a
self-IPI to be sent to the CPU running the code which requires the
memory controller to be ready, so if that happens too early in the
wakeup path, it doesn't work.
Prevent that from taking place by calling acpi_get_sleep_type_data()
for S0 upfront, when preparing to enter a given sleep state, and
saving the data obtained by it for later use during system wakeup.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=214271
Reported-by: Reik Keutterling <spielkind@gmail.com>
Tested-by: Reik Keutterling <spielkind@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 596143e3ae upstream.
Fix modpost Section mismatch error in next_platform_timer().
[...]
WARNING: modpost: vmlinux.o(.text.unlikely+0x26e60): Section mismatch in reference from the function next_platform_timer() to the variable .init.data:acpi_gtdt_desc
The function next_platform_timer() references
the variable __initdata acpi_gtdt_desc.
This is often because next_platform_timer lacks a __initdata
annotation or the annotation of acpi_gtdt_desc is wrong.
WARNING: modpost: vmlinux.o(.text.unlikely+0x26e64): Section mismatch in reference from the function next_platform_timer() to the variable .init.data:acpi_gtdt_desc
The function next_platform_timer() references
the variable __initdata acpi_gtdt_desc.
This is often because next_platform_timer lacks a __initdata
annotation or the annotation of acpi_gtdt_desc is wrong.
ERROR: modpost: Section mismatches detected.
Set CONFIG_SECTION_MISMATCH_WARN_ONLY=y to allow them.
make[1]: *** [scripts/Makefile.modpost:59: vmlinux.symvers] Error 1
make[1]: *** Deleting file 'vmlinux.symvers'
make: *** [Makefile:1176: vmlinux] Error 2
[...]
Fixes: a712c3ed9b ("acpi/arm64: Add memory-mapped timer support in GTDT driver")
Signed-off-by: Jackie Liu <liuyun01@kylinos.cn>
Acked-by: Hanjun Guo <guohanjun@huawei.com>
Link: https://lore.kernel.org/r/20210823092526.2407526-1-liu.yun@linux.dev
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 877c1a5f79 upstream.
Ampere Altra SOC supports only 32-bit ECAM reads. Add an MCFG quirk for
the platform.
Link: https://lore.kernel.org/r/1596751055-12316-1-git-send-email-tuanphan@os.amperecomputing.com
Signed-off-by: Tuan Phan <tuanphan@os.amperecomputing.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
[ dannf: backport drops const qualifier from pci_32b_read_ops for
consistency with the other quirks that weren't yet constified in v5.4 ]
Signed-off-by: dann frazier <dann.frazier@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b93dfa6bda upstream.
Fix the NFIT parsing code to treat a 0 index in a SPA Range Structure as
a special case and not match Region Mapping Structures that use 0 to
indicate that they are not mapped. Without this fix some platform BIOS
descriptions of "virtual disk" ranges do not result in the pmem driver
attaching to the range.
Details:
In addition to typical persistent memory ranges, the ACPI NFIT may also
convey "virtual" ranges. These ranges are indicated by a UUID in the SPA
Range Structure of UUID_VOLATILE_VIRTUAL_DISK, UUID_VOLATILE_VIRTUAL_CD,
UUID_PERSISTENT_VIRTUAL_DISK, or UUID_PERSISTENT_VIRTUAL_CD. The
critical difference between virtual ranges and UUID_PERSISTENT_MEMORY,
is that virtual do not support associations with Region Mapping
Structures. For this reason the "index" value of virtual SPA Range
Structures is allowed to be 0. If a platform BIOS decides to represent
NVDIMMs with disconnected "Region Mapping Structures" (range-index ==
0), the kernel may falsely associate them with standalone ranges where
the "SPA Range Structure Index" is also zero. When this happens the
driver may falsely require labels where "virtual disks" are expected to
be label-less. I.e. "label-less" is where the namespace-range ==
region-range and the pmem driver attaches with no user action to create
a namespace.
Cc: Jacek Zloch <jacek.zloch@intel.com>
Cc: Lukasz Sobieraj <lukasz.sobieraj@intel.com>
Cc: "Lee, Chun-Yi" <jlee@suse.com>
Cc: <stable@vger.kernel.org>
Fixes: c2f32acdf8 ("acpi, nfit: treat virtual ramdisk SPA as pmem region")
Reported-by: Krzysztof Rusocki <krzysztof.rusocki@intel.com>
Reported-by: Damian Bassa <damian.bassa@intel.com>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Link: https://lore.kernel.org/r/162870796589.2521182.1240403310175570220.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6511a8b5b7 upstream.
Revert commit c27bac0314 ("ACPICA: Fix memory leak caused by _CID
repair function") which is reported to cause a boot issue on Acer
Swift 3 (SF314-51).
Reported-by: Adrien Precigout <dev@asdrip.fr>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e0eef3690d upstream.
The commit 0ec4e55e9f ("ACPI: resources: Add checks for ACPI IRQ
override") introduces regression on some platforms, at least it makes
the UART can't get correct irq setting on two different platforms,
and it makes the kernel can't bootup on these two platforms.
This reverts commit 0ec4e55e9f.
Regression-discuss: https://bugzilla.kernel.org/show_bug.cgi?id=213031
Reported-by: PGNd <pgnet.dev@gmail.com>
Cc: 5.4+ <stable@vger.kernel.org> # 5.4+
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 9249c32ec9 ]
The Dell Vostro 3350 ACPI video-bus device reports spurious
ACPI_VIDEO_NOTIFY_CYCLE events resulting in spurious KEY_SWITCHVIDEOMODE
events being reported to userspace (and causing trouble there).
Add a quirk setting the report_key_events mask to
REPORT_BRIGHTNESS_KEY_EVENTS so that the ACPI_VIDEO_NOTIFY_CYCLE
events will be ignored, while still reporting brightness up/down
hotkey-presses to userspace normally.
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1911763
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7718629432 ]
In function amba_handler_attach(), dev->res.name is initialized by
amba_device_alloc. But when address_found is false, dev->res.name is
assigned to null value, which leads to wrong resource name display in
/proc/iomem, "<BAD>" is seen for those resources.
Signed-off-by: Liguang Zhang <zhangliguang@linux.alibaba.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f37ccf8fce ]
clang's Control Flow Integrity requires that every indirect call has a
valid target, which is based on the type of the function pointer. The
*_show() functions in this file are written as if they will be called
from dev_attr_show(); however, they will be called from
sysfs_kf_seq_show() because the files were created by
sysfs_create_group() and the sysfs ops are based on kobj_sysfs_ops
because of kobject_add_and_create(). Because the *_show() functions do
not match the type of the show() member in struct kobj_attribute, there
is a CFI violation.
$ cat /sys/firmware/acpi/bgrt/{status,type,version,{x,y}offset}}
1
0
1
522
307
$ dmesg | grep "CFI failure"
[ 267.761825] CFI failure (target: type_show.d5e1ad21498a5fd14edbc5c320906598.cfi_jt+0x0/0x8):
[ 267.762246] CFI failure (target: xoffset_show.d5e1ad21498a5fd14edbc5c320906598.cfi_jt+0x0/0x8):
[ 267.762584] CFI failure (target: status_show.d5e1ad21498a5fd14edbc5c320906598.cfi_jt+0x0/0x8):
[ 267.762973] CFI failure (target: yoffset_show.d5e1ad21498a5fd14edbc5c320906598.cfi_jt+0x0/0x8):
[ 267.763330] CFI failure (target: version_show.d5e1ad21498a5fd14edbc5c320906598.cfi_jt+0x0/0x8):
Convert these functions to the type of the show() member in struct
kobj_attribute so that there is no more CFI violation. Because these
functions are all so similar, combine them into a macro.
Fixes: d1ff4b1cdb ("ACPI: Add support for exposing BGRT data")
Link: https://github.com/ClangBuiltLinux/linux/issues/1406
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0f39ee8324 ]
Instead of open coding DEVICE_ATTR(), use the
DEVICE_ATTR_RW(), DEVICE_ATTR_RO() and DEVICE_ATTR_WO()
macros wherever possible.
This required a few functions to be renamed but the
functionality itself is unchanged.
Signed-off-by: Dwaipayan Ray <dwaipayanray1@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 888be6067b ]
Currently, a device description can be obtained using ACPI, if the _STR
method exists for a particular device, and then exposed to the userspace
via a sysfs object as a string value.
If the _STR method is available for a given device then the data
(usually a Unicode string) is read and stored in a buffer (of the
ACPI_TYPE_BUFFER type) with a pointer to said buffer cached in the
struct acpi_device_pnp for later access.
The description_show() function is responsible for exposing the device
description to the userspace via a corresponding sysfs object and
internally calls the utf16s_to_utf8s() function with a pointer to the
buffer that contains the Unicode string so that it can be converted from
UTF16 encoding to UTF8 and thus allowing for the value to be safely
stored and later displayed.
When invoking the utf16s_to_utf8s() function, the description_show()
function also sets a limit of the data that can be saved into a provided
buffer as a result of the character conversion to be a total of
PAGE_SIZE, and upon completion, the utf16s_to_utf8s() function returns
an integer value denoting the number of bytes that have been written
into the provided buffer.
Following the execution of the utf16s_to_utf8s() a newline character
will be added at the end of the resulting buffer so that when the value
is read in the userspace through the sysfs object then it would include
newline making it more accessible when working with the sysfs file
system in the shell, etc. Normally, this wouldn't be a problem, but if
the function utf16s_to_utf8s() happens to return the number of bytes
written to be precisely PAGE_SIZE, then we would overrun the buffer and
write the newline character outside the allotted space which can have
undefined consequences or result in a failure.
To fix this buffer overrun, ensure that there always is enough space
left for the newline character to be safely appended.
Fixes: d1efe3c324 ("ACPI: Add new sysfs interface to export device description")
Signed-off-by: Krzysztof Wilczyński <kw@linux.com>
Reviewed-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d1059c1b11 ]
A custom DSDT file is mostly used during development or debugging,
and in that case it is quite likely to want to rebuild the kernel
after changing ONLY the content of the DSDT.
This patch adds the custom DSDT as a prerequisite to tables.o
to ensure a rebuild if the DSDT file is updated. Make will merge
the prerequisites from multiple rules for the same target.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0ec4e55e9f ]
The laptop keyboard doesn't work on many MEDION notebooks, but the
keyboard works well under Windows and Unix.
Through debugging, we found this log in the dmesg:
ACPI: IRQ 1 override to edge, high
pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
And we checked the IRQ definition in the DSDT, it is:
IRQ (Level, ActiveLow, Exclusive, )
{1}
So the BIOS defines the keyboard IRQ to Level_Low, but the Linux
kernel override it to Edge_High. If the Linux kernel is modified
to skip the IRQ override, the keyboard will work normally.
From the existing comment in acpi_dev_get_irqresource(), the override
function only needs to be called when IRQ() or IRQNoFlags() is used
to populate the resource descriptor, and according to Section 6.4.2.1
of ACPI 6.4 [1], if IRQ() is empty or IRQNoFlags() is used, the IRQ
is High true, edge sensitive and non-shareable. ACPICA also assumes
that to be the case (see acpi_rs_set_irq[] in rsirq.c).
In accordance with the above, check 3 additional conditions
(EdgeSensitive, ActiveHigh and Exclusive) when deciding whether or
not to treat an ACPI_RESOURCE_TYPE_IRQ resource as "legacy", in which
case the IRQ override is applicable to it.
Link: https://uefi.org/specs/ACPI/6.4/06_Device_Configuration/Device_Configuration.html#irq-descriptor # [1]
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=213031
BugLink: http://bugs.launchpad.net/bugs/1909814
Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reported-by: Manuel Krause <manuelkrause@netscape.net>
Tested-by: Manuel Krause <manuelkrause@netscape.net>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
[ rjw: Subject rewrite, changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4ac7a817f1 ]
Although the system will not be in a good condition or it will not
boot if acpi_bus_init() fails, it is still necessary to put the
kobject in the error path before returning to avoid leaking memory.
Signed-off-by: Hanjun Guo <guohanjun@huawei.com>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c27bac0314 ]
ACPICA commit 180cb53963aa876c782a6f52cc155d951b26051a
According to the ACPI spec, _CID returns a package containing
hardware ID's. Each element of an ASL package contains a reference
count from the parent package as well as the element itself.
Name (TEST, Package() {
"String object" // this package element has a reference count of 2
})
A memory leak was caused in the _CID repair function because it did
not decrement the reference count created by the package. Fix the
memory leak by calling acpi_ut_remove_reference on _CID package elements
that represent a hardware ID (_HID).
Link: https://github.com/acpica/acpica/commit/180cb539
Tested-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6306f04319 ]
More ASUS laptops have the _GPE define in the DSDT table with a
different value than the _GPE number in the ECDT.
This is causing media keys not working on ASUS X505BA/BP, X542BA/BP
Add model info to the quirks list.
Signed-off-by: Chris Chiu <chris.chiu@canonical.com>
Signed-off-by: Jian-Hong Pan <jhp@endlessos.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 65ea8f2c6e ]
Generally, the C-state latency is provided by the _CST method or
FADT, but some OEM platforms using AMD Picasso, Renoir, Van Gogh,
and Cezanne set the C2 latency greater than C3's which causes the
C2 state to be skipped.
That will block the core entering PC6, which prevents S0ix working
properly on Linux systems.
In other operating systems, the latency values are not validated and
this does not cause problems by skipping states.
To avoid this issue on Linux, detect when latencies are not an
arithmetic progression and sort them.
Link: 026d186e45
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1230#note_712174
Suggested-by: Prike Liang <Prike.Liang@amd.com>
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0c8bd174f0 ]
If 'acpi_device_set_name()' fails, we must free
'acpi_device_bus_id->bus_id' or there is a (potential) memory leak.
Fixes: eb50aaf960 ("ACPI: scan: Use unique number for instance_no")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2bc6262c61 ]
All of the CPPC sysfs show functions are called via indirect call in
kobj_attr_show(), where they should be of type
ssize_t (*show)(struct kobject *kobj, struct kobj_attribute *attr, char *buf);
because that is the type of the ->show() member in
'struct kobj_attribute' but they are actually of type
ssize_t (*show)(struct kobject *kobj, struct attribute *attr, char *buf);
because of the ->show() member in 'struct cppc_attr', resulting in a
Control Flow Integrity violation [1].
$ cat /sys/devices/system/cpu/cpu0/acpi_cppc/highest_perf
3400
$ dmesg | grep "CFI failure"
[ 175.970559] CFI failure (target: show_highest_perf+0x0/0x8):
As far as I can tell, the only difference between 'struct cppc_attr'
and 'struct kobj_attribute' aside from the type of the attr parameter
is the type of the count parameter in the ->store() member (ssize_t vs.
size_t), which does not actually matter because all of these nodes are
read-only.
Eliminate 'struct cppc_attr' in favor of 'struct kobj_attribute' to fix
the violation.
[1]: https://lore.kernel.org/r/20210401233216.2540591-1-samitolvanen@google.com/
Fixes: 158c998ea4 ("ACPI / CPPC: add sysfs support to compute delivered performance")
Link: https://github.com/ClangBuiltLinux/linux/issues/1343
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 1ecd5b1292 upstream.
When failing the driver probe because of invalid firmware properties,
the GTDT driver unmaps the interrupt that it mapped earlier.
However, it never checks whether the mapping of the interrupt actially
succeeded. Even more, should the firmware report an illegal interrupt
number that overlaps with the GIC SGI range, this can result in an
IPI being unmapped, and subsequent fireworks (as reported by Dann
Frazier).
Rework the driver to have a slightly saner behaviour and actually
check whether the interrupt has been mapped before unmapping things.
Reported-by: dann frazier <dann.frazier@canonical.com>
Fixes: ca9ae5ec4e ("acpi/arm64: Add SBSA Generic Watchdog support in GTDT driver")
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/YH87dtTfwYgavusz@xps13.dannf
Cc: <stable@vger.kernel.org>
Cc: Fu Wei <wefu@redhat.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Tested-by: dann frazier <dann.frazier@canonical.com>
Tested-by: Hanjun Guo <guohanjun@huawei.com>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Link: https://lore.kernel.org/r/20210421164317.1718831-2-maz@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1cfd895643 upstream.
In cm_write(), if the 'buf' is allocated memory but not fully consumed,
it is possible to reallocate the buffer without freeing it by passing
'*ppos' as 0 on a subsequent call.
Add an explicit kfree() before kzalloc() to prevent the possible memory
leak.
Fixes: 526b4af47f ("ACPI: Split out custom_method functionality into an own driver")
Signed-off-by: Mark Langsdorf <mlangsdo@redhat.com>
Cc: 5.4+ <stable@vger.kernel.org> # 5.4+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e483bb9a99 upstream.
In cm_write(), buf is always freed when reaching the end of the
function. If the requested count is less than table.length, the
allocated buffer will be freed but subsequent calls to cm_write() will
still try to access it.
Remove the unconditional kfree(buf) at the end of the function and
set the buf to NULL in the -EINVAL error path to match the rest of
function.
Fixes: 03d1571d95 ("ACPI: custom_method: fix memory leaks")
Signed-off-by: Mark Langsdorf <mlangsdo@redhat.com>
Cc: 5.4+ <stable@vger.kernel.org> # 5.4+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1a1c130ab7 upstream.
The following problem has been reported by George Kennedy:
Since commit 7fef431be9 ("mm/page_alloc: place pages to tail
in __free_pages_core()") the following use after free occurs
intermittently when ACPI tables are accessed.
BUG: KASAN: use-after-free in ibft_init+0x134/0xc49
Read of size 4 at addr ffff8880be453004 by task swapper/0/1
CPU: 3 PID: 1 Comm: swapper/0 Not tainted 5.12.0-rc1-7a7fd0d #1
Call Trace:
dump_stack+0xf6/0x158
print_address_description.constprop.9+0x41/0x60
kasan_report.cold.14+0x7b/0xd4
__asan_report_load_n_noabort+0xf/0x20
ibft_init+0x134/0xc49
do_one_initcall+0xc4/0x3e0
kernel_init_freeable+0x5af/0x66b
kernel_init+0x16/0x1d0
ret_from_fork+0x22/0x30
ACPI tables mapped via kmap() do not have their mapped pages
reserved and the pages can be "stolen" by the buddy allocator.
Apparently, on the affected system, the ACPI table in question is
not located in "reserved" memory, like ACPI NVS or ACPI Data, that
will not be used by the buddy allocator, so the memory occupied by
that table has to be explicitly reserved to prevent the buddy
allocator from using it.
In order to address this problem, rearrange the initialization of the
ACPI tables on x86 to locate the initial tables earlier and reserve
the memory occupied by them.
The other architectures using ACPI should not be affected by this
change.
Link: https://lore.kernel.org/linux-acpi/1614802160-29362-1-git-send-email-george.kennedy@oracle.com/
Reported-by: George Kennedy <george.kennedy@oracle.com>
Tested-by: George Kennedy <george.kennedy@oracle.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: 5.10+ <stable@vger.kernel.org> # 5.10+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit eb50aaf960 ]
The decrementation of acpi_device_bus_id->instance_no
in acpi_device_del() is incorrect, because it may cause
a duplicate instance number to be allocated next time
a device with the same acpi_device_bus_id is added.
Replace above mentioned approach by using IDA framework.
While at it, define the instance range to be [0, 4096).
Fixes: e49bd2dd5a ("ACPI: use PNPID:instance_no as bus_id of ACPI device")
Fixes: ca9dc8d42b ("ACPI / scan: Fix acpi_bus_id_list bookkeeping")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: 4.10+ <stable@vger.kernel.org> # 4.10+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c1013ff7a5 ]
The upfront allocation of new_bus_id is done to avoid allocating
memory under acpi_device_lock, but it doesn't really help,
because (1) it leads to many unnecessary memory allocations for
_ADR devices, (2) kstrdup_const() is run under that lock anyway and
(3) it complicates the code.
Rearrange acpi_device_add() to allocate memory for a new struct
acpi_device_bus_id instance only when necessary, eliminate a redundant
local variable from it and reduce the number of labels in there.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit c1d1e25a8c upstream.
The .callback of the quirk for Sony VPCEH3U1E was unintetionally
removed by the commit 25417185e9 ("ACPI: video: Add DMI quirk
for GIGABYTE GB-BXBT-2807"). Add it back to make sure the quirk
for Sony VPCEH3U1E works as expected.
Fixes: 25417185e9 ("ACPI: video: Add DMI quirk for GIGABYTE GB-BXBT-2807")
Signed-off-by: Chris Chiu <chris.chiu@canonical.com>
Reported-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Pavel Machek (CIP) <pavel@denx.de>
Cc: 5.11+ <stable@vger.kernel.org> # 5.11+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 25417185e9 ]
The GIGABYTE GB-BXBT-2807 is a mini-PC which uses off the shelf
components, like an Intel GPU which is meant for mobile systems.
As such, it, by default, has a backlight controller exposed.
Unfortunately, the backlight controller only confuses userspace, which
sees the existence of a backlight device node and has the unrealistic
belief that there is actually a backlight there!
Add a DMI quirk to force the backlight off on this system.
Signed-off-by: Jasper St. Pierre <jstpierre@mecheye.net>
Reviewed-by: Chris Chiu <chiu@endlessos.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit c27f3d011b upstream.
ACPICA commit c9e0116952363b0fa815143dca7e9a2eb4fefa61
The handling of the generic_serial_bus (I2C) and GPIO op_regions in
acpi_ev_address_space_dispatch() passes a number of extra parameters
to the address-space handler through the address-space Context pointer
(instead of using more function parameters).
The Context is shared between threads, so if multiple threads try to
call the handler for the same address-space at the same time, then
a second thread could change the parameters of a first thread while
the handler is running for the first thread.
An example of this race hitting is the Lenovo Yoga Tablet2 1015L,
where there are both attrib_bytes accesses and attrib_byte accesses
to the same address-space. The attrib_bytes access stores the number
of bytes to transfer in Context->access_length. Where as for the
attrib_byte access the number of bytes to transfer is always 1 and
field_obj->Field.access_length is unused (so 0). Both types of
accesses racing from different threads leads to the following problem:
1. Thread a. starts an attrib_bytes access, stores a non 0 value
from field_obj->Field.access_length in Context->access_length
2. Thread b. starts an attrib_byte access, stores 0 in
Context->access_length
3. Thread a. calls i2c_acpi_space_handler() (under Linux). Which
sees that the access-type is ACPI_GSB_ACCESS_ATTRIB_MULTIBYTE
and calls acpi_gsb_i2c_read_bytes(..., Context->access_length)
4. At this point Context->access_length is 0 (set by thread b.)
rather then the field_obj->Field.access_length value from thread a.
This 0 length reads leads to the following errors being logged:
i2c i2c-0: adapter quirk: no zero length (addr 0x0078, size 0, read)
i2c i2c-0: i2c read 0 bytes from client@0x78 starting at reg 0x0 failed, error: -95
Note this is just an example of the problems which this race can cause.
There are likely many more (sporadic) problems caused by this race.
This commit adds a new context_mutex to struct acpi_object_addr_handler
and makes acpi_ev_address_space_dispatch() take that mutex when
using the shared Context to pass extra parameters to an address-space
handler, fixing this race.
Note the new mutex must be taken *after* exiting the interpreter,
therefor the existing acpi_ex_exit_interpreter() call is moved to above
the code which stores the extra parameters in the Context.
Link: https://github.com/acpica/acpica/commit/c9e01169
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 67e40054de upstream.
A list_add corruption is reported by Hulk Robot like this:
==============
list_add corruption.
Call Trace:
link_obj+0xc0/0x1c0
link_group+0x21/0x140
configfs_register_subsystem+0xdb/0x380
acpi_configfs_init+0x25/0x1000 [acpi_configfs]
do_one_initcall+0x149/0x820
do_init_module+0x1ef/0x720
load_module+0x35c8/0x4380
__do_sys_finit_module+0x10d/0x1a0
do_syscall_64+0x34/0x80
It's because of the missing check after configfs_register_default_group,
where configfs_unregister_subsystem should be called once failure.
Fixes: 612bd01fc6 ("ACPI: add support for loading SSDTs via configfs")
Reported-by: Hulk Robot <hulkci@huawei.com>
Suggested-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Cc: 4.10+ <stable@vger.kernel.org> # 4.10+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e1e6bd2995 upstream.
Property matching does not work for ACPI fwnodes if the value of the
given property is not represented as a package in the _DSD package
containing it. For example, the "compatible" property in the _DSD
below
Name (_DSD, Package () {
ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
Package () {
Package () {"compatible", "ethernet-phy-ieee802.3-c45"}
}
})
will not be found by fwnode_property_match_string(), because the ACPI
code handling device properties does not regard the single value as a
"list" in that case.
Namely, fwnode_property_match_string() invoked to match a given
string property value first calls fwnode_property_read_string_array()
with the last two arguments equal to NULL and 0, respectively, in
order to count the items in the value of the given property, with the
assumption that this value may be an array. For ACPI fwnodes, that
operation is carried out by acpi_node_prop_read() which calls
acpi_data_prop_read() for this purpose. However, when the return
(val) pointer is NULL, that function only looks for a property whose
value is a package without checking the single-value case at all.
To fix that, make acpi_data_prop_read() check the single-value
case if its return pointer argument is NULL and modify
acpi_data_prop_read_single() handling that case to attempt to
read the value of the property if the return pointer is NULL
and return 1 if that succeeds.
Fixes: 3708184afc ("device property: Move FW type specific functionality to FW specific files")
Reported-by: Calvin Johnson <calvin.johnson@oss.nxp.com>
Cc: 4.13+ <stable@vger.kernel.org> # 4.13+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 81b704d3e4 upstream.
Calling acpi_thermal_check() from acpi_thermal_notify() directly
is problematic if _TMP triggers Notify () on the thermal zone for
which it has been evaluated (which happens on some systems), because
it causes a new acpi_thermal_notify() invocation to be queued up
every time and if that takes place too often, an indefinite number of
pending work items may accumulate in kacpi_notify_wq over time.
Besides, it is not really useful to queue up a new invocation of
acpi_thermal_check() if one of them is pending already.
For these reasons, rework acpi_thermal_notify() to queue up a thermal
check instead of calling acpi_thermal_check() directly and only allow
one thermal check to be pending at a time. Moreover, only allow one
acpi_thermal_check_fn() instance at a time to run
thermal_zone_device_update() for one thermal zone and make it return
early if it sees other instances running for the same thermal zone.
While at it, fold acpi_thermal_check() into acpi_thermal_check_fn(),
as it is only called from there after the other changes made here.
[This issue appears to have been exposed by commit 6d25be5782
("sched/core, workqueues: Distangle worker accounting from rq
lock"), but it is unclear why it was not visible earlier.]
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=208877
Reported-by: Stephen Berman <stephen.berman@gmx.net>
Diagnosed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Tested-by: Stephen Berman <stephen.berman@gmx.net>
Cc: All applicable <stable@vger.kernel.org>
[bigeasy: Backported to v5.4.y]
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 36af2d5c44 upstream.
Commit 8765c5ba19 ("ACPI / scan: Rework modalias creation when
"compatible" is present") may create two "MODALIAS=" in one uevent
file if specific conditions are met.
This breaks systemd-udevd, which assumes each "key" in one uevent file
to be unique. The internal implementation of systemd-udevd overwrites
the first MODALIAS with the second one, so its kmod rule doesn't load
the driver for the first MODALIAS.
So if both the ACPI modalias and the OF modalias are present, use the
latter to ensure that there will be only one MODALIAS.
Link: https://github.com/systemd/systemd/pull/18163
Suggested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Fixes: 8765c5ba19 ("ACPI / scan: Rework modalias creation when "compatible" is present")
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: 4.1+ <stable@vger.kernel.org> # 4.1+
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 78a18fec52 upstream.
Set the acpi_device pointer which acpi_bus_get_device() returns-by-
reference to NULL on errors.
We've recently had 2 cases where callers of acpi_bus_get_device()
did not properly error check the return value, so set the returned-
by-reference acpi_device pointer to NULL, because at least some
callers of acpi_bus_get_device() expect that to be done on errors.
[ rjw: This issue was exposed by commit 71da201f38 ("ACPI: scan:
Defer enumeration of devices with _DEP lists") which caused it to
be much more likely to occur on some systems, but the real defect
had been introduced by an earlier commit. ]
Fixes: 40e7fcb192 ("ACPI: Add _DEP support to fix battery issue on Asus T100TA")
Fixes: bcfcd409d4 ("usb: split code locating ACPI companion into port and device")
Reported-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Diagnosed-by: Rafael J. Wysocki <rafael@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Cc: All applicable <stable@vger.kernel.org>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a58015d638 upstream.
Linux VM on Hyper-V crashes with the latest mainline:
[ 4.069624] detected buffer overflow in strcpy
[ 4.077733] kernel BUG at lib/string.c:1149!
..
[ 4.085819] RIP: 0010:fortify_panic+0xf/0x11
...
[ 4.085819] Call Trace:
[ 4.085819] acpi_device_add.cold.15+0xf2/0xfb
[ 4.085819] acpi_add_single_object+0x2a6/0x690
[ 4.085819] acpi_bus_check_add+0xc6/0x280
[ 4.085819] acpi_ns_walk_namespace+0xda/0x1aa
[ 4.085819] acpi_walk_namespace+0x9a/0xc2
[ 4.085819] acpi_bus_scan+0x78/0x90
[ 4.085819] acpi_scan_init+0xfa/0x248
[ 4.085819] acpi_init+0x2c1/0x321
[ 4.085819] do_one_initcall+0x44/0x1d0
[ 4.085819] kernel_init_freeable+0x1ab/0x1f4
This is because of the recent buffer overflow detection in the
commit 6a39e62abb ("lib: string.h: detect intra-object overflow in
fortified string functions")
Here acpi_device_bus_id->bus_id can only hold 14 characters, while the
the acpi_device_hid(device) returns a 22-char string
"HYPER_V_GEN_COUNTER_V1".
Per ACPI Spec v6.2, Section 6.1.5 _HID (Hardware ID), if the ID is a
string, it must be of the form AAA#### or NNNN####, i.e. 7 chars or 8
chars.
The field bus_id in struct acpi_device_bus_id was originally defined as
char bus_id[9], and later was enlarged to char bus_id[15] in 2007 in the
commit bb0958544f ("ACPI: use more understandable bus_id for ACPI
devices")
Fix the issue by changing the field bus_id to const char *, and use
kstrdup_const() to initialize it.
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Tested-By: Jethro Beekman <jethro@fortanix.com>
[ rjw: Subject change, whitespace adjustment ]
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b08221c40f upstream.
Recently we met a touchscreen problem on some Thinkpad machines, the
touchscreen driver (i2c-hid) is not loaded and the touchscreen can't
work.
An i2c ACPI device with the name WACF2200 is defined in the BIOS, with
the current rule in matching_id(), this device will be regarded as
a PNP device since there is WACFXXX in the acpi_pnp_device_ids[] and
this PNP device is attached to the acpi device as the 1st
physical_node, this will make the i2c bus match fail when i2c bus
calls acpi_companion_match() to match the acpi_id_table in the i2c-hid
driver.
WACF2200 is an i2c device instead of a PNP device, after adding the
string length comparing, the matching_id() will return false when
matching WACF2200 and WACFXXX, and it is reasonable to compare the
string length when matching two IDs.
Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 12fc4dad94 upstream.
This reverts commit 8a66790b78.
Switching this function to AE_CTRL_TERMINATE broke the documented
behaviour of acpi_dev_get_resources() - AE_CTRL_TERMINATE does not, in
fact, terminate the resource walk because acpi_walk_resource_buffer()
ignores it (specifically converting it to AE_OK), referring to that
value as "an OK termination by the user function". This means that
acpi_dev_get_resources() does not abort processing when the preproc
function returns a negative value.
Signed-off-by: Daniel Scally <djrscally@gmail.com>
Cc: 3.10+ <stable@vger.kernel.org> # 3.10+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7482c5cb90 upstream.
The idea behind acpi_pm_set_bridge_wakeup() was to allow bridges to
be reference counted for wakeup enabling, because they may be enabled
to signal wakeup on behalf of their subordinate devices and that
may happen for multiple times in a row, whereas for the other devices
it only makes sense to enable wakeup signaling once.
However, this becomes problematic if the bridge itself is suspended,
because it is treated as a "regular" device in that case and the
reference counting doesn't work.
For instance, suppose that there are two devices below a bridge and
they both can signal wakeup. Every time one of them is suspended,
wakeup signaling is enabled for the bridge, so when they both have
been suspended, the bridge's wakeup reference counter value is 2.
Say that the bridge is suspended subsequently and acpi_pci_wakeup()
is called for it. Because the bridge can signal wakeup, that
function will invoke acpi_pm_set_device_wakeup() to configure it
and __acpi_pm_set_device_wakeup() will be called with the last
argument equal to 1. This causes __acpi_device_wakeup_enable()
invoked by it to omit the reference counting, because the reference
counter of the target device (the bridge) is 2 at that time.
Now say that the bridge resumes and one of the device below it
resumes too, so the bridge's reference counter becomes 0 and
wakeup signaling is disabled for it, but there is still the other
suspended device which may need the bridge to signal wakeup on its
behalf and that is not going to work.
To address this scenario, use wakeup enable reference counting for
all devices, not just for bridges, so drop the last argument from
__acpi_device_wakeup_enable() and __acpi_pm_set_device_wakeup(),
which causes acpi_pm_set_device_wakeup() and
acpi_pm_set_bridge_wakeup() to become identical, so drop the latter
and use the former instead of it everywhere.
Fixes: 1ba51a7c14 ("ACPI / PCI / PM: Rework acpi_pci_propagate_wakeup()")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: 4.14+ <stable@vger.kernel.org> # 4.14+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 7daaa06357 ]
The Medion Akoya E2228T's ACPI _LID implementation is quite broken,
it has the same issues as the one from the Medion Akoya E2215T:
1. For notifications it uses an ActiveLow Edge GpioInt, rather then
an ActiveBoth one, meaning that the device is only notified when the
lid is closed, not when it is opened.
2. Matching with this its _LID method simply always returns 0 (closed)
In order for the Linux LID code to work properly with this implementation,
the lid_init_state selection needs to be set to ACPI_BUTTON_LID_INIT_OPEN,
add a DMI quirk for this.
While working on this I also found out that the MD60### part of the model
number differs per country/batch while all of the E2215T and E2228T models
have this issue, so also remove the " MD60198" part from the E2215T quirk.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 9debfb81e7 upstream.
Clang is more aggressive about -Wformat warnings when the format flag
specifies a type smaller than the parameter. It turns out that gsi is an
int. Fixes:
drivers/acpi/evged.c:105:48: warning: format specifies type 'unsigned
char' but the argument has type 'unsigned int' [-Wformat]
trigger == ACPI_EDGE_SENSITIVE ? 'E' : 'L', gsi);
^~~
Link: https://github.com/ClangBuiltLinux/linux/issues/378
Fixes: ea6f3af4c5 ("ACPI: GED: add support for _Exx / _Lxx handler methods")
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 85f971b65a ]
Initial value of rc is '-ENXIO', and we should
use the initial value to check it.
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
[ rjw: Subject edit ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit e0e9ce390d upstream.
It turns out that in some cases there are EC events to flush in
acpi_ec_dispatch_gpe() even though the ec_no_wakeup kernel parameter
is set and the EC GPE is disabled while sleeping, so drop the
ec_no_wakeup check that prevents those events from being processed
from acpi_ec_dispatch_gpe().
Reported-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Cc: 5.4+ <stable@vger.kernel.org> # 5.4+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5e92442bb4 upstream.
Commit 607b9df630 ("ACPI: EC: PM: Avoid flushing EC work when EC
GPE is inactive") has been reported to cause some power button wakeup
events to be missed on some systems, so modify acpi_ec_dispatch_gpe()
to call acpi_ec_flush_work() unconditionally to effectively reverse
the changes made by that commit.
Also note that the problem which prompted commit 607b9df630 is not
reproducible any more on the affected machine.
Fixes: 607b9df630 ("ACPI: EC: PM: Avoid flushing EC work when EC GPE is inactive")
Reported-by: Raymond Tan <raymond.tan@intel.com>
Cc: 5.4+ <stable@vger.kernel.org> # 5.4+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0fada27714 upstream.
If ACPI is disabled then loading the acpi_dbg module will result in the
following splat when lock debugging is enabled.
DEBUG_LOCKS_WARN_ON(lock->magic != lock)
WARNING: CPU: 0 PID: 1 at kernel/locking/mutex.c:938 __mutex_lock+0xa10/0x1290
Kernel panic - not syncing: panic_on_warn set ...
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.9.0-rc8+ #103
Hardware name: linux,dummy-virt (DT)
Call trace:
dump_backtrace+0x0/0x4d8
show_stack+0x34/0x48
dump_stack+0x174/0x1f8
panic+0x360/0x7a0
__warn+0x244/0x2ec
report_bug+0x240/0x398
bug_handler+0x50/0xc0
call_break_hook+0x160/0x1d8
brk_handler+0x30/0xc0
do_debug_exception+0x184/0x340
el1_dbg+0x48/0xb0
el1_sync_handler+0x170/0x1c8
el1_sync+0x80/0x100
__mutex_lock+0xa10/0x1290
mutex_lock_nested+0x6c/0xc0
acpi_register_debugger+0x40/0x88
acpi_aml_init+0xc4/0x114
do_one_initcall+0x24c/0xb10
kernel_init_freeable+0x690/0x728
kernel_init+0x20/0x1e8
ret_from_fork+0x10/0x18
This is because acpi_debugger.lock has not been initialized as
acpi_debugger_init() is not called when ACPI is disabled. Fail module
loading to avoid this and any subsequent problems that might arise by
trying to debug AML when ACPI is disabled.
Fixes: 8cfb0cdf07 ("ACPI / debugger: Add IO interface to access debugger functionalities")
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Jamie Iles <jamie@nuviainc.com>
Cc: 4.10+ <stable@vger.kernel.org> # 4.10+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b226faab4e upstream.
The default backlight interface is AMD's radeon_bl0 which does not
work on this system, so use the ACPI backlight interface on it
instead.
BugLink: https://bugs.launchpad.net/bugs/1894667
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Alex Hung <alex.hung@canonical.com>
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7cecb47f55 upstream.
extlog_init() uses rdmsrl() to read an MSR, which on older CPUs
provokes a error message at boot:
unchecked MSR access error: RDMSR from 0x179 at rIP: 0xcd047307 (native_read_msr+0x7/0x40)
Use rdmsrl_safe() instead, and return -ENODEV if it fails.
Reported-by: jim@photojim.ca
References: https://bugs.debian.org/971058
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
