This patch implements following changes to support RoCE-v2
in the RC path:
* Get the GID-type for a given sgid.
* Based on the GID-type get IPv4/IPv6 L3-address
and give those to underlying device.
* Resolve and provide network header type to device.
Signed-off-by: Somnath Kotur <somnath.kotur@avagotech.com>
Signed-off-by: Devesh Sharma <devesh.sharma@avagotech.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch adds following changes to support RoCE-v2
in the UD path.
* During AH creation GID-type is resolved for a given gid-index.
* Based on GID-type protocol header is built.
* Work completion reports network header type and set
IB_WC_WITH_NETWORK_HDR_TYPE flag in wc->wc_flags to indicate
that the network header type is valid.
Signed-off-by: Somnath Kotur <somnath.kotur@avagotech.com>
Signed-off-by: Devesh Sharma <devesh.sharma@avagotech.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Add support to read device configuration and initialize port-immutables
to report UDP-Encap flag during port query.
Signed-off-by: Devesh Sharma <devesh.sharma@avagotech.com>
Signed-off-by: Somnath Kotur <somnath.kotur@avagotech.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Recently Dough Ledford reported a deadlock happening
between ocrdma-load sequence and NetworkManager service
issuing "open" on be2net interface.
The deadlock happens when any be2net hook (e.g. open/close) is called
in parallel to insmod ocrdma.ko.
A. be2net is sending administrative open/close event to ocrdma holding
device_list_mutex. It does this from ndo_open/ndo_stop hooks of be2net.
So sequence of locks is rtnl_lock---> device_list lock
B. When new ocrdma roce device gets registered, infiniband stack now
takes rtnl_lock in ib_register_device() in GID initialization routines.
So sequence of locks in this path is device_list lock ---> rtnl_lock.
This improper locking sequence causes deadlock.
With this patch we stop using administrative open and close events
injected by be2net driver. These events were used to dispatch PORT_ACTIVE
and PORT_ERROR events to the IB-stack. This patch implements a logic
to receive async-link-events generated from CNA whenever link-state-change
is detected. Now on, these async-events will be used to dispatch
PORT_ACTIVE and PORT_ERROR events to IB-stack.
Depending on async-events from CNA removes the need to hold device-list-mutex
and thus breaks the busy-wait scenario.
Reported-by: Doug Ledford <dledford@redhat.com>
CC: Sathya Perla <sathya.perla@avagotech.com>
Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@avagotech.com>
Signed-off-by: Selvin Xavier <selvin.xavier@avagotech.com>
Signed-off-by: Devesh Sharma <devesh.sharma@avagotech.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
1.Change query_gid hook to return value from IB/Core GID
management APIs.
2.Get rid of all the netdev notifier chain subscription code as well
as maintenance of SGID Table in memory.
3.Implement get_netdev hook in driver.
Signed-off-by: Somnath Kotur <somnath.kotur@avagotech.com>
Signed-off-by: Devesh Sharma <devesh.sharma@avagotech.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Change of license from GPLv2 to dual-license (GPLv2 and BSD 2-Clause)
All contributors were contacted off-list and permission to make this
change was received. The complete list of contributors are Cc:ed here.
Cc: Tejun Heo <tj@kernel.org>
Cc: Duan Jiong <duanj.fnst@cn.fujitsu.com>
Cc: Roland Dreier <roland@purestorage.com>
Cc: Jes Sorensen <Jes.Sorensen@redhat.com>
Cc: Sasha Levin <levinsasha928@gmail.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Cc: Moni Shoua <monis@mellanox.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Li RongQing <roy.qing.li@gmail.com>
Cc: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Devesh Sharma <devesh.sharma@avagotech.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
For the AH that describs a VLAN interface details, vlan present bit
needs to be set during posting a WQE. This patch adds the code to
allow it happening.
Signed-off-by: Mitesh Ahuja <mitesh.ahuja@emulex.com>
Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Add support for interrupt moderation for ocrdma device. Thresholds
for high interrupt rates are static values derived based on experimental
results.
Signed-off-by: Mitesh Ahuja <mitesh.ahuja@emulex.com>
Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: Selvin Xavier <selvin.xavier@emulex.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Move PD allocation and deallocation from firmware to driver. At
driver load time all the PDs will be requested from firmware and their
management will be handled by driver to reduce mailbox commands
overhead at runtime.
Signed-off-by: Mitesh Ahuja <mitesh.ahuja@emulex.com>
Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: Selvin Xavier <selvin.xavier@emulex.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Parenthesis around constants serves no purpose, save the bits!
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Update the sli specific mailbox command request/response data
sturcures to fix endianness issues.
Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
HW can support 16K STAG entries. Change this max limit. Also, move
this array out of ocrdma_dev to reduce the size of this structure.
Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: Selvin Xavier <selvin.xavier@emulex.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Fix the Statistics command opcode. Also specify the opcode of each
command for better readablilty.
Signed-off-by: Selvin Xavier <selvin.xavier@emulex.com>
Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Removing hardcoded value of max dpp qps and calculate the same from
doorbell page size and WQE size.
Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: Selvin Xavier <selvin.xavier@emulex.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
This patch implements routine to query the PFC priority from the
adapter port.
Following are the changes implemented:
* A new FW command is implemented to query the operational/admin DCBX
configuration from the FW and obtain active priority(service
level).
* Adds support for the async event reported by FW when the PFC
priority changes. Service level is re-initialized during modify_qp
or create_ah, based on this event.
* Maintain SL value in ocrdma_dev structure and refer that as and
when needed.
Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: Selvin Xavier <selvin.xavier@emulex.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Clean up code. Also modifying GSI QP to error during ocrdma_close is fixed.
Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: Selvin Xavier <selvin.xavier@emulex.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Issue mailbox commands to query ocrdma controller information and phy
information and print them while adding ocrdma device.
Signed-off-by: Selvin Xavier <selvin.xavier@emulex.com>
Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
ocrdma driver selects execution path based on sli_family and asic
generation number. This introduces code to read the asic gen number
from pci register instead of obtaining it from the Emulex NIC driver.
Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: Selvin Xavier <selvin.xavier@emulex.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
OCRDMA_GEN2_FAMILY is wrongly defined as 0x02 -- it should be 0x0F.
Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Fix ah->av->valid bit position and big endian portability.
Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
In UMC case, driver needs to fill PVID in the address vector
template for UD traffic.
Signed-off-by: Naresh Gottumukkala <bgottumukkala@emulex.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
1) Increase STAG Array size.
2) Max inline data size should be set to the same value
used during QP creation
3) Set max_sge_rd to zero since we dont support RD transport in our adapters.
4) Max cqes reported in ibv_devinfo should be from QUERY_CONFIG.
Signed-off-by: Naresh Gottumukkala <bgottumukkala@emulex.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Create_CQ verb doesn't provide a PD pointer. So, until now we are
creating all (both userspace and kernel) CQ DB regions from PD0. This
will result in mmapping PD0 to applications. A rogue userspace
application can mess things up.
Also more serious issues is even the be2net NIC uses PD0.
This patch addresses this problem by:
1) Create a PD page for every userspace application when the
alloc_ucontext is called. This will be destroyed in
dealloc_ucontext.
2) All CQs for that context will use the PD allocated in ucontext.
3) The first create_PD call from application will result in returning
the PD address from its ucontext (no new PD will be created).
4) For subsecquent create_pd calls from application, we create new PDs for
the application.
Signed-off-by: Naresh Gottumukkala <bgottumukkala@emulex.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
1) Fixed setting FR_MR bit for FRWR stag allocation
2) Access rights are passsed during FRWR stage and not during STAT allocation stage
3) FRWR WQE structure cleanup
4) Add QP level signaled bit.
Signed-off-by: Naresh Gottumukkala <bgottumukkala@emulex.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
1) All RQ doorbells are handled by ERX2 and doorbell->num_posted
offset is constant to bit offset 24 for ERX2 irrspective of Q id.
2) Fixed RESET to INIT state change (from ERR->RST->INIT->RTR case).
Signed-off-by: Naresh Gottumukkala <bgottumukkala@emulex.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Also get the max_srq value from query_config mailbox response.
Signed-off-by: Naresh Gottumukkala <bgottumukkala@emulex.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
1) In post recv, don't ring the DB doorbell if the QP is in RTR state.
Cache the DB calls, until the QP is moved to RTS state.
2) Add max_rd_sge support to dev->attr.
3) Code cleanup in alloc_pd path.
Signed-off-by: Naresh Gottumukkala <bgottumukkala@emulex.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
1) Remove __packed for structures.
2) Align and pad all ABI structure to 64 bit boundaries
instead of using __packed.
Signed-off-by: Naresh Gottumukkala <bgottumukkala@emulex.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Use MCC_CREATE_EXT_V1 to create MCC_queue to receive RoCE events.
Signed-off-by: Naresh Gottumukkala <bgottumukkala@emulex.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Fix max sge calculation for sq, rq, srq for all hardware types.
Signed-off-by: Mahesh Vardhamanaiah <mahesh.vardhamanaiah@emulex.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Fix code to read the max wqe and max rqe values from mailbox response.
Signed-off-by: Mahesh Vardhamanaiah <mahesh.vardhamanaiah@emulex.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
