Commit Graph

68 Commits

Author SHA1 Message Date
Rusty Russell f87e0434a3 lguest, x86/entry/32: Fix handling of guest syscalls using interrupt gates
In a798f09111 ("x86/entry/32: Change INT80 to be an interrupt gate")
Andy broke lguest.  This is because lguest had special code to allow
the 0x80 trap gate go straight into the guest itself; interrupts gates
(without more work, as mentioned in the file's comments) bounce via
the hypervisor.

His change made them go via the hypervisor, but as it's in the range of
normal hardware interrupts, they were not directed through to the guest
at all.  Turns out the guest userspace isn't very effective if syscalls
are all noops.

I haven't ripped out all the now-useless trap-direct-to-guest-kernel
code yet, since it will still be needed if someone decides to update
this optimization.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Weisbecker <fweisbec@gmail.com>
Cc: x86\@kernel.org
Link: http://lkml.kernel.org/r/87fuv685kl.fsf@rustcorp.com.au
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-04-01 08:58:13 +02:00
Rusty Russell 2f921b5bb0 lguest: suppress interrupts for single insn, not range.
The last patch reduced our interrupt-suppression region to one address,
so simplify the code somewhat.

Also, remove the obsolete undefined instruction ranges and the comment
which refers to lguest_guest.S instead of head_32.S.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-03-24 11:52:08 +10:30
Rusty Russell d9bab50aa4 lguest: remove NOTIFY call and eventfd facility.
Disappointing, as this was kind of neat (especially getting to use RCU
to manage the address -> eventfd mapping).  But now the devices are PCI
handled in userspace, we get rid of both the NOTIFY hypercall and
the interface to connect an eventfd.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-02-11 16:47:46 +10:30
Rusty Russell 7313d5217e lguest: add iomem region, where guest page faults get sent to userspace.
This lets us implement PCI.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-02-11 16:47:33 +10:30
Rusty Russell c9e433e4b8 lguest: add infrastructure to check mappings.
We normally abort the guest unconditionally when it gives us a bad address,
but in the next patch we want to copy some bytes which may not be mapped.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-02-11 16:47:31 +10:30
Rusty Russell 69a09dc174 lguest: write more information to userspace about pending traps.
This is preparation for userspace handling MMIO and ioport accesses.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-02-11 16:47:30 +10:30
Rusty Russell 18c137371b lguest: add operations to get/set a register from the Launcher.
We use the ptrace API struct, and we currently don't let them set
anything but the normal registers (we'd have to filter the others).

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-02-11 16:47:29 +10:30
Rusty Russell 6d0cda93c0 lguest: cache last cpu we ran on.
This optimizes the frobbing of our Switcher map.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2013-04-22 15:45:03 +09:30
Rusty Russell 86935fc4ee lguest: map Switcher text whenever we allocate a new pagetable.
It's always to same, so no need to put in the PTE every time we're
about to run.  Keep a flag to track whether the pagetable has the
Switcher entries allocated, and when allocating always initialize the
Switcher text PTE.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2013-04-22 15:45:02 +09:30
Rusty Russell 3412b6ae29 lguest: don't share Switcher PTE pages between guests.
We currently use the whole top PGD entry for the switcher, so we
simply share a fixed page of PTEs between all guests (actually, it's
one per Host CPU, to ensure isolation between guests).

Changes to a scheme where every guest has its own mappings.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2013-04-22 15:45:01 +09:30
Rusty Russell f1f394b1c3 lguest: expost switcher_pages array (as lg_switcher_pages).
We will need this in page_table.c soon.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2013-04-22 15:45:00 +09:30
Rusty Russell 93a2cdff98 lguest: assume Switcher text is a single page.
ie. SHARED_SWITCHER_PAGES == 1.  It is well under a page, and it's a
minor simplification: it's nice to have *one* simplification in a
patch series!

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2013-04-22 15:31:36 +09:30
Rusty Russell 856c608827 lguest: rename switcher_page to switcher_pages.
There is a single page with the Switcher in it, but it's followed by 2
pages per Host CPU.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2013-04-22 15:31:35 +09:30
Rusty Russell 5dea1c88ed lguest: use a special 1:1 linear pagetable mode until first switch.
The Host used to create some page tables for the Guest to use at the
top of Guest memory; it would then tell the Guest where this was.  In
particular, it created linear mappings for 0 and 0xC0000000 addresses
because lguest used to switch to its real page tables quite late in
boot.

However, since d50d8fe19 Linux initialized boot page tables in
head_32.S even before the "are we lguest?" boot jump.  So, now we can
simplify things: the Host pagetable code assumes 1:1 linear mapping
until it first calls the LHCALL_NEW_PGTABLE hypercall, which we now do
before we reach C code.

This also means that the Host doesn't need to know anything about the
Guest's PAGE_OFFSET.  (Non-Linux guests might not even have such a
thing).

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2011-07-22 14:39:48 +09:30
Tejun Heo 5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00
Rusty Russell 1842f23c05 lguest and virtio: cleanup struct definitions to Linux style.
I've been doing this for years, and akpm picked me up on it about 12
months ago.  lguest partly serves as example code, so let's do it Right.

Also, remove two unused fields in struct vblk_info in the example launcher.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Ingo Molnar <mingo@redhat.com>
2009-07-30 16:03:46 +09:30
Rusty Russell 2e04ef7691 lguest: fix comment style
I don't really notice it (except to begrudge the extra vertical
space), but Ingo does.  And he pointed out that one excuse of lguest
is as a teaching tool, it should set a good example.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Ingo Molnar <mingo@redhat.com>
2009-07-30 16:03:45 +09:30
Davide Libenzi 27de22d03d lguest: remove unnecessary forward struct declaration
While fixing lg.h to drop the fwd declaration, I noticed
there's another one ;)

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-07-17 21:47:44 +09:30
Davide Libenzi 133890103b eventfd: revised interface and cleanups
Change the eventfd interface to de-couple the eventfd memory context, from
the file pointer instance.

Without such change, there is no clean way to racely free handle the
POLLHUP event sent when the last instance of the file* goes away.  Also,
now the internal eventfd APIs are using the eventfd context instead of the
file*.

This patch is required by KVM's IRQfd code, which is still under
development.

Signed-off-by: Davide Libenzi <davidel@xmailserver.org>
Cc: Gregory Haskins <ghaskins@novell.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Benjamin LaHaise <bcrl@kvack.org>
Cc: Avi Kivity <avi@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-30 18:55:58 -07:00
Rusty Russell 5dac051bc6 lguest: remove obsolete LHREQ_BREAK call
We no longer need an efficient mechanism to force the Guest back into
host userspace, as each device is serviced without bothering the main
Guest process (aka. the Launcher).

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-06-12 22:27:11 +09:30
Rusty Russell df60aeef4f lguest: use eventfds for device notification
Currently, when a Guest wants to perform I/O it calls LHCALL_NOTIFY with
an address: the main Launcher process returns with this address, and figures
out what device to run.

A far nicer model is to let processes bind an eventfd to an address: if we
find one, we simply signal the eventfd.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Davide Libenzi <davidel@xmailserver.org>
2009-06-12 22:27:10 +09:30
Rusty Russell 9f155a9b3d lguest: allow any process to send interrupts
We currently only allow the Launcher process to send interrupts, but it
as we already send interrupts from the hrtimer, it's a simple matter of
extracting that code into a common set_interrupt routine.

As we switch to a thread per virtqueue, this avoids a bottleneck through the
main Launcher process.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-06-12 22:27:09 +09:30
Matias Zabaljauregui acdd0b6292 lguest: PAE support
This version requires that host and guest have the same PAE status.
NX cap is not offered to the guest, yet.

Signed-off-by: Matias Zabaljauregui <zabaljauregui@gmail.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-06-12 22:27:08 +09:30
Matias Zabaljauregui ebe0ba84f5 lguest: replace hypercall name LHCALL_SET_PMD with LHCALL_SET_PGD
replace LHCALL_SET_PMD with LHCALL_SET_PGD hypercall name
(That's really what it is, and the confusion gets worse with PAE support)

Signed-off-by: Matias Zabaljauregui <zabaljauregui@gmail.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Reported-by: Jeremy Fitzhardinge <jeremy@goop.org>
2009-06-12 22:27:07 +09:30
Matias Zabaljauregui f086122bb6 lguest: Segment selectors are 16-bit long. Fix lg_cpu.ss1 definition.
If GDT_ENTRIES were every > 256, this could become a problem.

Signed-off-by: Matias Zabaljauregui <zabaljauregui at gmail.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-06-12 22:27:04 +09:30
Rusty Russell a32a8813d0 lguest: improve interrupt handling, speed up stream networking
lguest never checked for pending interrupts when enabling interrupts, and
things still worked.  However, it makes a significant difference to TCP
performance, so it's time we fixed it by introducing a pending_irq flag
and checking it on irq_restore and irq_enable.

These two routines are now too big to patch into the 8/10 bytes
patch space, so we drop that code.

Note: The high latency on interrupt delivery had a very curious
effect: once everything else was optimized, networking without GSO was
faster than networking with GSO, since more interrupts were sent and
hence a greater chance of one getting through to the Guest!

Note2: (Almost) Closing the same loophole for iret doesn't have any
measurable effect, so I'm leaving that patch for the moment.

Before:
	1GB tcpblast Guest->Host:		30.7 seconds
	1GB tcpblast Guest->Host (no GSO):	76.0 seconds

After:
	1GB tcpblast Guest->Host:		6.8 seconds
	1GB tcpblast Guest->Host (no GSO):	27.8 seconds

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-06-12 22:27:03 +09:30
Rusty Russell abd41f037e lguest: fix race in halt code
When the Guest does the LHCALL_HALT hypercall, we go to sleep, expecting
that a timer or the Waker will wake_up_process() us.

But we do it in a stupid way, leaving a classic missing wakeup race.

So split maybe_do_interrupt() into interrupt_pending() and
try_deliver_interrupt(), and check maybe_do_interrupt() and the
"break_out" flag before calling schedule.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-06-12 22:27:02 +09:30
Rusty Russell a489f0b555 lguest: fix guest crash on non-linear addresses in gdt pvops
Fixes guest crash 'lguest: bad read address 0x4800000 len 256'

The new per-cpu allocator ends up handing a non-linear address to
write_gdt_entry.  We do __pa() on it, and hand it to the host, which
kills us.

I've long wanted to make the hypercall "LOAD_GDT_ENTRY" to match the IDT
code, but had no pressing reason until now.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: lguest@ozlabs.org
2009-04-19 23:14:01 +09:30
Matias Zabaljauregui df1693abc4 lguest: use bool instead of int
Impact: clean up

Rusty told me, some time ago, that he had become a fan of "bool".
So, here are some replacements.

Signed-off-by: Matias Zabaljauregui <zabaljauregui at gmail.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-03-30 21:55:25 +10:30
Matias Zabaljauregui 58a2456644 lguest: move the initial guest page table creation code to the host
This patch moves the initial guest page table creation code to the host,
so the launcher keeps working with PAE enabled configs.

Signed-off-by: Matias Zabaljauregui <zabaljauregui@gmail.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-12-30 09:26:11 +10:30
Jeremy Fitzhardinge a15af1c9ea x86/paravirt: add pte_flags to just get pte flags
Add pte_flags() to extract the flags from a pte.  This is a special
case of pte_val() which is only guaranteed to return the pte's flags
correctly; the page number may be corrupted or missing.

The intent is to allow paravirt implementations to return pte flags
without having to do any translation of the page number (most notably,
Xen).

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-27 10:11:36 +02:00
Matthew Wilcox d3135846f6 drivers: Remove unnecessary inclusions of asm/semaphore.h
None of these files use any of the functionality promised by
asm/semaphore.h.  It's possible that they rely on it dragging in some
unrelated header file, but I can't build all these files, so we'll have
fix any build failures as they come up.

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
2008-04-18 22:16:32 -04:00
Glauber de Oliveira Costa ca94f2bdd1 lguest: Use explicit includes rateher than indirect
explicitly use ktime.h include
explicitly use hrtimer.h include
explicitly use sched.h include

This patch adds headers explicitly to lguest sources file,
to avoid depending on them being included somewhere else.

Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-01-30 22:50:19 +11:00
Glauber de Oliveira Costa 382ac6b3fb lguest: get rid of lg variable assignments
We can save some lines of code by getting rid of
*lg = cpu... lines of code spread everywhere by now.

Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-01-30 22:50:18 +11:00
Glauber de Oliveira Costa ae3749dcd8 lguest: move changed bitmap to lg_cpu
events represented in the 'changed' bitmap are per-cpu, not per-guest.
move it to the lg_cpu structure

Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-01-30 22:50:17 +11:00
Glauber de Oliveira Costa f34f8c5fea lguest: move last_pages to lg_cpu
in our new model, pages are assigned to a virtual cpu, not to a guest.
We move it to the lg_cpu structure.

Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-01-30 22:50:16 +11:00
Glauber de Oliveira Costa 1713608f28 lguest: per-vcpu lguest pgdir management
this patch makes the pgdir management per-vcpu. The pgdirs pool
is still guest-wide (although it'll probably need to grow when we
are really executing more vcpus), but the pgdidx index is gone,
since it makes no sense anymore. Instead, we use a per-vcpu
index.

Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-01-30 22:50:14 +11:00
Glauber de Oliveira Costa 5e232f4f42 lguest: make pending notifications per-vcpu
this patch makes the pending_notify field, used to control
pending notifications, per-vcpu, instead of per-guest

Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-01-30 22:50:13 +11:00
Glauber de Oliveira Costa 4665ac8e28 lguest: makes special fields be per-vcpu
lguest struct have room for some fields, namely, cr2, ts, esp1
and ss1, that are not really guest-wide, but rather, vcpu-wide.

This patch puts it in the vcpu struct

Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-01-30 22:50:13 +11:00
Glauber de Oliveira Costa 66686c2ab0 lguest: per-vcpu lguest task management
lguest uses tasks to control its running behaviour (like sending
breaks, controlling halted state, etc). In a per-vcpu environment,
each vcpu will have its own underlying task. So this patch
makes the infrastructure for that possible

Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-01-30 22:50:12 +11:00
Glauber de Oliveira Costa fc708b3e40 lguest: replace lguest_arch with lg_cpu_arch.
The fields found in lguest_arch are not really per-guest,
but per-cpu (gdt, idt, etc). So this patch turns lguest_arch
into lg_cpu_arch.

It makes sense to have a per-guest per-arch struct, but this
can be addressed later, when the need arrives.

Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-01-30 22:50:11 +11:00
Glauber de Oliveira Costa a53a35a8b4 lguest: make registers per-vcpu
This is the most obvious per-vcpu field: registers.

So this patch moves it from struct lguest to struct vcpu,
and patch the places in which they are used, accordingly

Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-01-30 22:50:11 +11:00
Glauber de Oliveira Costa 0c78441cf4 lguest: map_switcher_in_guest() per-vcpu
The switcher needs to be mapped per-vcpu, because different vcpus
will potentially have different page tables (they don't have to,
because threads will share the same).

So our first step is the make the function receive a vcpu struct

Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-01-30 22:50:09 +11:00
Glauber de Oliveira Costa 177e449dc5 lguest: per-vcpu interrupt processing.
This patch adapts interrupt processing for using the vcpu struct.

Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-01-30 22:50:09 +11:00
Glauber de Oliveira Costa ad8d8f3bc6 lguest: per-vcpu lguest timers
Here, I introduce per-vcpu timers. With this, we can have
local expiries, needed for accounting time in smp guests

Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-01-30 22:50:08 +11:00
Glauber de Oliveira Costa 73044f05a4 lguest: make hypercalls use the vcpu struct
this patch changes do_hcall() and do_async_hcall() interfaces (and obviously their
callers) to get a vcpu struct. Again, a vcpu services the hypercall, not the whole
guest

Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-01-30 22:50:08 +11:00
Glauber de Oliveira Costa d0953d42c3 lguest: per-cpu run guest
This patch makes the run_guest() routine use the lg_cpu struct.
This is required since in a smp guest environment, there's no
more the notion of "running the guest", but rather, it is "running the vcpu"

Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-01-30 22:50:06 +11:00
Glauber de Oliveira Costa badb1e0402 lguest: introduce vcpu struct
this patch introduces a vcpu struct for lguest. In upcoming patches,
more and more fields will be moved from the lguest struct to the vcpu

Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-01-30 22:50:04 +11:00
Rusty Russell e1e72965ec lguest: documentation update
Went through the documentation doing typo and content fixes.  This
patch contains only comment and whitespace changes.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2007-10-25 15:02:50 +10:00
Rusty Russell 197bff630a lguest: remove unused "wake" element from struct lguest
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2007-10-25 14:10:30 +10:00