Since commit 00e7e698bf ("backlight: pwm_bl: Configure pwm only once
per backlight toggle") calling pwm_backlight_power_off() doesn't disable
the PWM any more. However this is necessary to suspend because PWM
drivers usually refuse to suspend if they are still enabled.
Also adapt shutdown and remove callbacks to disable the PWM for similar
reasons.
Fixes: 00e7e698bf ("backlight: pwm_bl: Configure pwm only once per backlight toggle")
Reported-by: Aisheng Dong <aisheng.dong@nxp.com>
Tested-by: Aisheng Dong <aisheng.dong@nxp.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20231009093223.227286-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Lee Jones <lee@kernel.org>
- Ensure correct includes are present and remove some that are not required
- Drop redundant of_match_ptr() call to cast pointer to NULL
- Bug Fixes
- Revert to old (expected) behaviour of initialising PWM state on first brightness change
- Correctly handle / propagate errors
- Fix 'sometimes-uninitialised' issues
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEdrbJNaO+IJqU8IdIUa+KL4f8d2EFAmT15P0ACgkQUa+KL4f8
d2FKXA/+LL5nsswN5Vv7MALU87C9Lk068S4LCA8XVSRmB3jBAGwtz1kHj320nv16
PH3FFgCxIg4A0CVNXlPujatmwZpEGJNneGortYYNV+OaWOv3rnZigXtcOshU8pIW
by8flfHyzdBiXn/RRQuxsWWws8Fg12x8ZtYUeuXuNC7W9mvDxArxHkawhinCfp7i
duITp8qTDkcCLRyxZ1oIQEoBuGrlYDZDodofEW1LyE98iy/RMtX8UoOREcF8XgZF
LfA5m/inJSF06uzYR4Z60MIJ2b7L5O7tD+auqssNW3/XHTyCHOKGR/wrcwk7BzEn
cpN6i0jjWR4wEGQVCtpghWKnd11X3IW8uF7M7vXO2a+M5iz5u98s7PAjNL8MHSEB
N8Ekqd1nzkeIdjXqopLEGm0RI8ixaVY7jJiSGSp83kEEjdcybRWxgmHslTgBP++O
6YLRHyh2gGDxJcBEoBtMhYFeMDki58i426iqTE9NeWye7T43/jCojZ0FR1XgdMHB
Mqu/4NsZTTA41evzAI1GR9P5nxogjq3w9ZzWRcq996YodklzNJOhff3Tlb7aT7bo
/MgnnqwvwRB4VWn6t2QQYq6UN+5wfh0VeNCCO+jFT13IfNrjc51Qnev3i7jKr0Fg
H6DgKGxUyzfx4VOVJdtQ9DtQ3el1dXBJ69TdGyTk3YME6R3ZtxQ=
=5vB4
-----END PGP SIGNATURE-----
Merge tag 'backlight-next-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight
Pull backlight updates from Lee Jones:
"New Functionality:
- Ensure correct includes are present and remove some that are not
required
- Drop redundant of_match_ptr() call to cast pointer to NULL
Bug Fixes:
- Revert to old (expected) behaviour of initialising PWM state on
first brightness change
- Correctly handle / propagate errors
- Fix 'sometimes-uninitialised' issues"
* tag 'backlight-next-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight:
backlight: led_bl: Remove redundant of_match_ptr()
backlight: lp855x: Drop ret variable in brightness change function
backlight: gpio_backlight: Drop output GPIO direction check for initial power state
backlight: lp855x: Catch errors when changing brightness
backlight: lp855x: Initialize PWM state on first brightness change
backlight: qcom-wled: Explicitly include correct DT includes
The driver depends on CONFIG_OF, it is not necessary to use
of_match_ptr() here.
Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20230818012308.2058373-1-ruanjinjie@huawei.com
Signed-off-by: Lee Jones <lee@kernel.org>
Fixes the following warning:
drivers/video/backlight/lp855x_bl.c:252:7: warning: variable 'ret' is used
uninitialized whenever 'if' condition is false [-Wsometimes-uninitialized]
Signed-off-by: Artur Weber <aweber.kernel@gmail.com>
Fixes: 5145531be5 ("backlight: lp855x: Catch errors when changing brightness")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202308091728.NEJhgUPP-lkp@intel.com/
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20230809114216.4078-1-aweber.kernel@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
So, let's drop output GPIO direction check and only check GPIO value to set
the initial power state.
Fixes: 706dc68102 ("backlight: gpio: Explicitly set the direction of the GPIO")
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20230721093342.1532531-1-victor.liu@nxp.com
Signed-off-by: Lee Jones <lee@kernel.org>
The lp855x_bl_update_status function's return type is int, but
it always returns 0, without checking for the results of the
write_byte/pwm_ctrl functions called within.
Make this function return the return values of the functions it
calls, and modify the lp855x_pwm_ctrl function to return errors.
Signed-off-by: Artur Weber <aweber.kernel@gmail.com>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20230714121440.7717-3-aweber.kernel@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
As pointed out by Uwe Kleine-König[1], the changes introduced in
commit c1ff7da03e ("video: backlight: lp855x: Get PWM for PWM mode
during probe") caused the PWM state set up by the bootloader to be
re-set when the driver is probed. This differs from the behavior from
before that patch, where the PWM state would be initialized on the
first brightness change.
Fix this by moving the PWM state initialization into the PWM control
function. Add a new variable, needs_pwm_init, to the device info struct
to allow us to check whether we need the initialization, or whether it
has already been done.
[1] https://lore.kernel.org/lkml/20230614083953.e4kkweddjz7wztby@pengutronix.de/
Fixes: c1ff7da03e ("video: backlight: lp855x: Get PWM for PWM mode during probe")
Signed-off-by: Artur Weber <aweber.kernel@gmail.com>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20230714121440.7717-2-aweber.kernel@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230714175029.4065326-1-robh@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
Currently the CONFIG_FB option has to be enabled even if no legacy fbdev
drivers are needed (e.g: only to have support for framebuffer consoles).
The DRM subsystem has a fbdev emulation layer, but depends on CONFIG_FB
and so it can only be enabled if that dependency is enabled as well.
That means fbdev drivers have to be explicitly disabled if users want to
enable CONFIG_FB, only to use fbcon and/or the DRM fbdev emulation layer.
This patch introduces a non-visible CONFIG_FB_CORE symbol that could be
enabled just to have core support needed for CONFIG_DRM_FBDEV_EMULATION,
allowing CONFIG_FB to be disabled (and automatically disabling all the
fbdev drivers).
Nothing from fb_backlight.o and fbmon.o is used by the DRM fbdev emulation
layer so these two objects can be compiled out when CONFIG_FB is disabled.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230719081544.741051-4-javierm@redhat.com
UAPI Changes:
* fbdev:
* Make fbdev userspace interfaces optional; only leaves the
framebuffer console active
* prime:
* Support dma-buf self-import for all drivers automatically: improves
support for many userspace compositors
Cross-subsystem Changes:
* backlight:
* Fix interaction with fbdev in several drivers
* base: Convert struct platform.remove to return void; part of a larger,
tree-wide effort
* dma-buf: Acquire reservation lock for mmap() in exporters; part
of an on-going effort to simplify locking around dma-bufs
* fbdev:
* Use Linux device instead of fbdev device in many places
* Use deferred-I/O helper macros in various drivers
* i2c: Convert struct i2c from .probe_new to .probe; part of a larger,
tree-wide effort
* video:
* Avoid including <linux/screen_info.h>
Core Changes:
* atomic:
* Improve logging
* prime:
* Remove struct drm_driver.gem_prime_mmap plus driver updates: all
drivers now implement this callback with drm_gem_prime_mmap()
* gem:
* Support execution contexts: provides locking over multiple GEM
objects
* ttm:
* Support init_on_free
* Swapout fixes
Driver Changes:
* accel:
* ivpu: MMU updates; Support debugfs
* ast:
* Improve device-model detection
* Cleanups
* bridge:
* dw-hdmi: Improve support for YUV420 bus format
* dw-mipi-dsi: Fix enable/disable of DSI controller
* lt9611uxc: Use MODULE_FIRMWARE()
* ps8640: Remove broken EDID code
* samsung-dsim: Fix command transfer
* tc358764: Handle HS/VS polarity; Use BIT() macro; Various cleanups
* Cleanups
* ingenic:
* Kconfig REGMAP fixes
* loongson:
* Support display controller
* mgag200:
* Minor fixes
* mxsfb:
* Support disabling overlay planes
* nouveau:
* Improve VRAM detection
* Various fixes and cleanups
* panel:
* panel-edp: Support AUO B116XAB01.4
* Support Visionox R66451 plus DT bindings
* Cleanups
* ssd130x:
* Support per-controller default resolution plus DT bindings
* Reduce memory-allocation overhead
* Cleanups
* tidss:
* Support TI AM625 plus DT bindings
* Implement new connector model plus driver updates
* vkms
* Improve write-back support
* Documentation fixes
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEchf7rIzpz2NEoWjlaA3BHVMLeiMFAmSvvRAACgkQaA3BHVML
eiNpGQgAs8jq1XjN9t8jZsdgXnoCbkZyVUI2NO0HwoVwpRCLgbXp5AX5qq2oRciE
TBhe4Fceh/ZsYqHTZQahnguxgRKM5JgXwbI4Z0iiOVcqasNbycaKAqipxJJ7kdo1
qPhGCbgQFVX7oIq2xjfXehh6O0SYX+R9r88X8dMJxMYv/pcLwOHG74kS040WOcQq
uATgcnobOf/D8ZmlqvfKGAeTUoFo/RSR2Uhlauka58qgeUbicrTELZT2barY9d+k
as6U5vv4wx2zMklTkjrlkMpAT1ZpbB9d3jGHwL27VEnjlfd3wV2bdH7Dzn9qZRf/
gn0ALg/b3u5yBWk/k7YBvijXyNcH6Q==
=bBuG
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2023-07-13' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v6.6:
UAPI Changes:
* fbdev:
* Make fbdev userspace interfaces optional; only leaves the
framebuffer console active
* prime:
* Support dma-buf self-import for all drivers automatically: improves
support for many userspace compositors
Cross-subsystem Changes:
* backlight:
* Fix interaction with fbdev in several drivers
* base: Convert struct platform.remove to return void; part of a larger,
tree-wide effort
* dma-buf: Acquire reservation lock for mmap() in exporters; part
of an on-going effort to simplify locking around dma-bufs
* fbdev:
* Use Linux device instead of fbdev device in many places
* Use deferred-I/O helper macros in various drivers
* i2c: Convert struct i2c from .probe_new to .probe; part of a larger,
tree-wide effort
* video:
* Avoid including <linux/screen_info.h>
Core Changes:
* atomic:
* Improve logging
* prime:
* Remove struct drm_driver.gem_prime_mmap plus driver updates: all
drivers now implement this callback with drm_gem_prime_mmap()
* gem:
* Support execution contexts: provides locking over multiple GEM
objects
* ttm:
* Support init_on_free
* Swapout fixes
Driver Changes:
* accel:
* ivpu: MMU updates; Support debugfs
* ast:
* Improve device-model detection
* Cleanups
* bridge:
* dw-hdmi: Improve support for YUV420 bus format
* dw-mipi-dsi: Fix enable/disable of DSI controller
* lt9611uxc: Use MODULE_FIRMWARE()
* ps8640: Remove broken EDID code
* samsung-dsim: Fix command transfer
* tc358764: Handle HS/VS polarity; Use BIT() macro; Various cleanups
* Cleanups
* ingenic:
* Kconfig REGMAP fixes
* loongson:
* Support display controller
* mgag200:
* Minor fixes
* mxsfb:
* Support disabling overlay planes
* nouveau:
* Improve VRAM detection
* Various fixes and cleanups
* panel:
* panel-edp: Support AUO B116XAB01.4
* Support Visionox R66451 plus DT bindings
* Cleanups
* ssd130x:
* Support per-controller default resolution plus DT bindings
* Reduce memory-allocation overhead
* Cleanups
* tidss:
* Support TI AM625 plus DT bindings
* Implement new connector model plus driver updates
* vkms
* Improve write-back support
* Documentation fixes
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230713090830.GA23281@linux-uq9g
Rename struct lv5207lp_platform_data.fbdev to 'dev', as it stores a
pointer to the Linux platform device; not the fbdev device. Makes
the code easier to understand.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Lee Jones <lee@kernel.org>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Jingoo Han <jingoohan1@gmail.com>
Cc: linux-sh@vger.kernel.org
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230613110953.24176-7-tzimmermann@suse.de
Struct lv5207lp_platform_data refers to a platform device within
the Linux device hierarchy. The test in lv5207lp_backlight_check_fb()
compares it against the fbdev device in struct fb_info.dev, which
is different. Fix the test by comparing to struct fb_info.device.
Fixes a bug in the backlight driver and prepares fbdev for making
struct fb_info.dev optional.
v2:
* move renames into separate patch (Javier, Sam, Michael)
Fixes: 82e5c40d88 ("backlight: Add Sanyo LV5207LP backlight driver")
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Lee Jones <lee@kernel.org>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Jingoo Han <jingoohan1@gmail.com>
Cc: linux-sh@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v3.12+
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230613110953.24176-6-tzimmermann@suse.de
Rename the field 'fbdev' in struct gpio_backlight_platform_data and
struct gpio_backlight to 'dev', as they store pointers to the Linux
platform device; not the fbdev device. Makes the code easier to
understand.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Rich Felker <dalias@libc.org>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Lee Jones <lee@kernel.org>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Jingoo Han <jingoohan1@gmail.com>
Cc: linux-sh@vger.kernel.org
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230613110953.24176-5-tzimmermann@suse.de
Struct gpio_backlight_platform_data refers to a platform device within
the Linux device hierarchy. The test in gpio_backlight_check_fb()
compares it against the fbdev device in struct fb_info.dev, which
is different. Fix the test by comparing to struct fb_info.device.
Fixes a bug in the backlight driver and prepares fbdev for making
struct fb_info.dev optional.
v2:
* move renames into separate patch (Javier, Sam, Michael)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 8b770e3c98 ("backlight: Add GPIO-based backlight driver")
Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Cc: Rich Felker <dalias@libc.org>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Lee Jones <lee@kernel.org>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Jingoo Han <jingoohan1@gmail.com>
Cc: linux-sh@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v3.12+
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230613110953.24176-4-tzimmermann@suse.de
Rename struct bd6107_platform_data.fbdev to 'dev', as it stores a
pointer to the Linux platform device; not the fbdev device. Makes
the code easier to understand.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Lee Jones <lee@kernel.org>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Jingoo Han <jingoohan1@gmail.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230613110953.24176-3-tzimmermann@suse.de
Struct bd6107_platform_data refers to a platform device within
the Linux device hierarchy. The test in bd6107_backlight_check_fb()
compares it against the fbdev device in struct fb_info.dev, which
is different. Fix the test by comparing to struct fb_info.device.
Fixes a bug in the backlight driver and prepares fbdev for making
struct fb_info.dev optional.
v2:
* move renames into separate patch (Javier, Sam, Michael)
Fixes: 67b43e5904 ("backlight: Add ROHM BD6107 backlight driver")
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Cc: Lee Jones <lee@kernel.org>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Jingoo Han <jingoohan1@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v3.12+
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230613110953.24176-2-tzimmermann@suse.de
Also deprecate the pwm-period DT property, as it is now redundant
(pwms property already contains period value).
Signed-off-by: Artur Weber <aweber.kernel@gmail.com>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230519180728.2281-3-aweber.kernel@gmail.com
After commit b8a1a4cd5a ("i2c: Provide a temporary .probe_new()
call-back type"), all drivers being converted to .probe_new() and then
03c835f498 ("i2c: Switch .probe() to not take an id parameter") convert
back to (the new) .probe() to be able to eventually drop .probe_new() from
struct i2c_driver.
Also fix two indention inconsistencies in the neighbourhood.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230521143844.375244-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Lee Jones <lee@kernel.org>
Use backlight_is_blank() to determine if the led strings should be turned
off in the update_status() functions of both strings.
Signed-off-by: Maximilian Weigand <mweigand@mweigand.net>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://lore.kernel.org/r/20230510085239.1253896-1-mweigand2017@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
Here is the large set of driver core changes for 6.4-rc1.
Once again, a busy development cycle, with lots of changes happening in
the driver core in the quest to be able to move "struct bus" and "struct
class" into read-only memory, a task now complete with these changes.
This will make the future rust interactions with the driver core more
"provably correct" as well as providing more obvious lifetime rules for
all busses and classes in the kernel.
The changes required for this did touch many individual classes and
busses as many callbacks were changed to take const * parameters
instead. All of these changes have been submitted to the various
subsystem maintainers, giving them plenty of time to review, and most of
them actually did so.
Other than those changes, included in here are a small set of other
things:
- kobject logging improvements
- cacheinfo improvements and updates
- obligatory fw_devlink updates and fixes
- documentation updates
- device property cleanups and const * changes
- firwmare loader dependency fixes.
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZEp7Sw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykitQCfamUHpxGcKOAGuLXMotXNakTEsxgAoIquENm5
LEGadNS38k5fs+73UaxV
=7K4B
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the large set of driver core changes for 6.4-rc1.
Once again, a busy development cycle, with lots of changes happening
in the driver core in the quest to be able to move "struct bus" and
"struct class" into read-only memory, a task now complete with these
changes.
This will make the future rust interactions with the driver core more
"provably correct" as well as providing more obvious lifetime rules
for all busses and classes in the kernel.
The changes required for this did touch many individual classes and
busses as many callbacks were changed to take const * parameters
instead. All of these changes have been submitted to the various
subsystem maintainers, giving them plenty of time to review, and most
of them actually did so.
Other than those changes, included in here are a small set of other
things:
- kobject logging improvements
- cacheinfo improvements and updates
- obligatory fw_devlink updates and fixes
- documentation updates
- device property cleanups and const * changes
- firwmare loader dependency fixes.
All of these have been in linux-next for a while with no reported
problems"
* tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (120 commits)
device property: make device_property functions take const device *
driver core: update comments in device_rename()
driver core: Don't require dynamic_debug for initcall_debug probe timing
firmware_loader: rework crypto dependencies
firmware_loader: Strip off \n from customized path
zram: fix up permission for the hot_add sysfs file
cacheinfo: Add use_arch[|_cache]_info field/function
arch_topology: Remove early cacheinfo error message if -ENOENT
cacheinfo: Check cache properties are present in DT
cacheinfo: Check sib_leaf in cache_leaves_are_shared()
cacheinfo: Allow early level detection when DT/ACPI info is missing/broken
cacheinfo: Add arm64 early level initializer implementation
cacheinfo: Add arch specific early level initializer
tty: make tty_class a static const structure
driver core: class: remove struct class_interface * from callbacks
driver core: class: mark the struct class in struct class_interface constant
driver core: class: make class_register() take a const *
driver core: class: mark class_release() as taking a const *
driver core: remove incorrect comment for device_create*
MIPS: vpe-cmp: remove module owner pointer from struct class usage.
...
The module pointer in class_create() never actually did anything, and it
shouldn't have been requred to be set as a parameter even if it did
something. So just remove it and fix up all callers of the function in
the kernel tree at the same time.
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20230313181843.1207845-4-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It is preferred to use typed property access functions (i.e.
of_property_read_<type> functions) rather than low-level
of_get_property/of_find_property functions for reading properties.
Convert reading boolean properties to to of_property_read_bool().
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230310144731.1546190-1-robh@kernel.org
It is preferred to use typed property access functions (i.e.
of_property_read_<type> functions) rather than low-level
of_get_property/of_find_property functions for reading properties. As
part of this, convert of_get_property/of_find_property calls to the
recently added of_property_present() helper when we just want to test
for presence of a property and nothing more.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230310144730.1546101-1-robh@kernel.org
The driver will match mostly by DT table (even thought there is regular
ID table) so there is little benefit in of_match_ptr (this also allows
ACPI matching via PRP0001, even though it might not be relevant here).
drivers/video/backlight/arcxcnn_bl.c:378:34: error: ‘arcxcnn_dt_ids’ defined but not used [-Werror=unused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230311173556.263086-2-krzysztof.kozlowski@linaro.org
The driver can be compile tested with !CONFIG_OF making certain data
unused:
drivers/video/backlight/lp855x_bl.c:551:34: error: ‘lp855x_dt_ids’ defined but not used [-Werror=unused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230311173556.263086-1-krzysztof.kozlowski@linaro.org
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230308073945.2336302-14-u.kleine-koenig@pengutronix.de
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230308073945.2336302-13-u.kleine-koenig@pengutronix.de
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230308073945.2336302-12-u.kleine-koenig@pengutronix.de
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230308073945.2336302-11-u.kleine-koenig@pengutronix.de
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230308073945.2336302-10-u.kleine-koenig@pengutronix.de
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230308073945.2336302-9-u.kleine-koenig@pengutronix.de
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230308073945.2336302-8-u.kleine-koenig@pengutronix.de
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230308073945.2336302-7-u.kleine-koenig@pengutronix.de
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230308073945.2336302-6-u.kleine-koenig@pengutronix.de
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Adam Ward <DLG-Adam.Ward.opensource@dm.renesas.com>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230308073945.2336302-5-u.kleine-koenig@pengutronix.de
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230308073945.2336302-4-u.kleine-koenig@pengutronix.de
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230308073945.2336302-3-u.kleine-koenig@pengutronix.de
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230308073945.2336302-2-u.kleine-koenig@pengutronix.de
On some MacBooks both the apple_bl and the apple-gmux backlight drivers
may be able to export a /sys/class/backlight device.
To avoid having 2 backlight devices for one LCD panel until now
the apple-gmux driver has been calling apple_bl_unregister() to move
the apple_bl backlight device out of the way when it loads.
Similar problems exist on other x86 laptops and all backlight drivers
which may be used on x86 laptops have moved to using
acpi_video_get_backlight_type() to determine whether they should load
or not.
Switch apple_bl to this model too, so that it is consistent with all
the other x86 backlight drivers.
Besides code-simplification and consistency this has 2 other benefits:
1) It removes a race during boot where userspace will briefly see
an apple_bl backlight and then have it disappear again, leading to e.g.:
https://bbs.archlinux.org/viewtopic.php?id=269920
2) This allows user to switch between the drivers by passing
acpi_backlight=apple_gmux or acpi_backlight=vendor on the kernel
commandline.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Acked-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230307120540.389920-1-hdegoede@redhat.com
- Add support for Kinetic KTZ8866 Backlight
- Remove Drivers
- Toshiba Sharp SL-6000 LCD and Backlight
- Fix-ups
- Provide some profiling optimisations with respect to pwm_get_state() and pwm_apply_state()
- Make use of the dev_err_probe() API
- Provide some Device Tree documentation additions / adaptions
- Drop fall-back legacy PWM probing support
- Convert over to new I2C probing API
- Fix incorrect documentation
- Make use of backlight_get_brightness() API
- Bug Fixes
- Fix disabling backlight on i.MX6 when inverted PWMs are used
-----BEGIN PGP SIGNATURE-----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=R7zl
-----END PGP SIGNATURE-----
Merge tag 'backlight-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight
Pull backlight updates from Lee Jones:
"New Drivers:
- Add support for Kinetic KTZ8866 Backlight
Removed Drivers:
- Toshiba Sharp SL-6000 LCD and Backlight
Fix-ups:
- Provide some profiling optimisations with respect to
pwm_get_state() and pwm_apply_state()
- Make use of the dev_err_probe() API
- Provide some Device Tree documentation additions / adaptions
- Drop fall-back legacy PWM probing support
- Convert over to new I2C probing API
- Fix incorrect documentation
- Make use of backlight_get_brightness() API
Bug Fixes:
- Fix disabling backlight on i.MX6 when inverted PWMs are used"
* tag 'backlight-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight:
backlight: ktz8866: Convert to i2c's .probe_new()
backlight: ktz8866: Add support for Kinetic KTZ8866 backlight
dt-bindings: leds: backlight: Add Kinetic KTZ8866 backlight
backlight: pwm_bl: Don't rely on a disabled PWM emiting inactive state
backlight: pwm_bl: Configure pwm only once per backlight toggle
backlight: Remove pxa tosa support
backlight: aat2870: Use backlight helper
backlight: ipaq_micro: Use backlight helper
backlight: arcxcnn: Use backlight helper
backlight: sky81452: Fix sky81452_bl_platform_data kernel-doc
backlight: pwm_bl: Drop support for legacy PWM probing
dt-bindings: backlight: qcom-wled: Add PMI8950 compatible
backlight: ktd253: Switch to use dev_err_probe() helper
backlight: backlight: Fix doc for backlight_device_get_by_name
Most but not all PWMs drive the PWM pin to its inactive state when
disabled. However if there is no enable_gpio and no regulator the PWM
must drive the inactive state to actually disable the backlight.
So keep the PWM on in this case.
Note that to determine if there is a regulator some effort is required
because it might happen that there isn't actually one but the regulator
core gave us a dummy. (A nice side effect is that this makes the
regulator actually optional even on fully constrained systems.)
This fixes backlight disabling e.g. on i.MX6 when an inverted PWM is
used.
Hint for the future: If this change results in a regression, the bug is
in the lowlevel PWM driver.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230120120018.161103-3-u.kleine-koenig@pengutronix.de
When the function pwm_backlight_update_status() was called with
brightness > 0, pwm_get_state() was called twice (once directly and once
in compute_duty_cycle). Also pwm_apply_state() was called twice (once in
pwm_backlight_power_on() and once directly).
Optimize this to do both calls only once.
Note that with this affects the order of regulator and PWM setup. It's
not expected to have a relevant effect on hardware. The rationale for
this is that the regulator (and the GPIO) are reasonable to switch in
pwm_backlight_power_on()/pwm_backlight_power_off() but the PWM has
nothing to do with power. (The post_pwm_on_delay and pwm_off_delay are
still there though.)
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230120120018.161103-2-u.kleine-koenig@pengutronix.de
The PXA tosa machine was removed, so this backlight driver is no
longer needed.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230105134622.254560-10-arnd@kernel.org
Uwe Kleine-König