commit 23baf831a3 ("mm, treewide: redefine MAX_ORDER sanely") has
changed the definition of MAX_ORDER to be inclusive. This has caused
issues with code that was not yet upstream and depended on the previous
definition.
To draw attention to the altered meaning of the define, rename MAX_ORDER
to MAX_PAGE_ORDER.
Link: https://lkml.kernel.org/r/20231228144704.14033-2-kirill.shutemov@linux.intel.com
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
If we repeatedly fail to fake offline memory to unplug it, we won't be
sending any unplug requests to the device. However, we only check if the
config changed when sending such (un)plug requests.
We could end up trying for a long time to unplug memory, even though
the config changed already and we're not supposed to unplug memory
anymore. For example, the hypervisor might detect a low-memory situation
while unplugging memory and decide to replug some memory. Continuing
trying to unplug memory in that case can be problematic.
So let's check on a more regular basis.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20230713145551.2824980-5-david@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In case offline_and_remove_memory() fails in SBM, we leave a completely
unplugged Linux memory block stick around until we try plugging memory
again. We won't try removing that memory block again.
offline_and_remove_memory() may, for example, fail if we're racing with
another alloc_contig_range() user, if allocating temporary memory fails,
or if some memory notifier rejected the offlining request.
Let's handle that case better, by simple retrying to offline and remove
such memory.
Tested using CONFIG_MEMORY_NOTIFIER_ERROR_INJECT.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20230713145551.2824980-4-david@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Just like we do with alloc_contig_range(), let's convert all unknown
errors to -EBUSY, but WARN so we can look into the issue. For example,
offline_pages() could fail with -EINTR, which would be unexpected in our
case.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20230713145551.2824980-3-david@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When "unsafe unplug" is enabled, we don't fake-offline all memory ahead of
actual memory offlining using alloc_contig_range(). Instead, we rely on
offline_pages() to also perform actual page migration, which might fail
or take a very long time.
In that case, it's possible to easily run into endless loops that cannot be
aborted anymore (as offlining is triggered by a workqueue then): For
example, a single (accidentally) permanently unmovable page in
ZONE_MOVABLE results in an endless loop. For ZONE_NORMAL, races between
isolating the pageblock (and checking for unmovable pages) and
concurrent page allocation are possible and similarly result in endless
loops.
The idea of the unsafe unplug mode was to make it possible to more
reliably unplug large memory blocks. However, (a) we really should be
tackling that differently, by extending the alloc_contig_range()-based
mechanism; and (b) this mode is not the default and as far as I know,
it's unused either way.
So let's simply get rid of it.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20230713145551.2824980-2-david@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Use is_zone_movable_page() helper to simplify code.
Link: https://lkml.kernel.org/r/20220726131135.146912-1-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@amd.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
alloc_contig_range() now only needs to be aligned to pageblock_nr_pages,
drop virtio_mem size requirement that it needs to be MAX_ORDER_NR_PAGES.
Link: https://lkml.kernel.org/r/20220425143118.2850746-7-zi.yan@sent.com
Signed-off-by: Zi Yan <ziy@nvidia.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: David Hildenbrand <david@redhat.com>
Cc: Eric Ren <renzhengeek@gmail.com>
Cc: kernel test robot <lkp@intel.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Some places in the kernel don't really expect pageblock_order >=
MAX_ORDER, and it looks like this is only possible in corner cases:
1) CONFIG_DEFERRED_STRUCT_PAGE_INIT we'll end up freeing pageblock_order
pages via __free_pages_core(), which cannot possibly work.
2) find_zone_movable_pfns_for_nodes() will roundup the ZONE_MOVABLE
start PFN to MAX_ORDER_NR_PAGES. Consequently with a bigger
pageblock_order, we could have a single pageblock partially managed by
two zones.
3) compaction code runs into __fragmentation_index() with order
>= MAX_ORDER, when checking WARN_ON_ONCE(order >= MAX_ORDER). [1]
4) mm/page_reporting.c won't be reporting any pages with default
page_reporting_order == pageblock_order, as we'll be skipping the
reporting loop inside page_reporting_process_zone().
5) __rmqueue_fallback() will never be able to steal with
ALLOC_NOFRAGMENT.
pageblock_order >= MAX_ORDER is weird either way: it's a pure
optimization for making alloc_contig_range(), as used for allcoation of
gigantic pages, a little more reliable to succeed. However, if there is
demand for somewhat reliable allocation of gigantic pages, affected
setups should be using CMA or boottime allocations instead.
So let's make sure that pageblock_order < MAX_ORDER and simplify.
[1] https://lkml.kernel.org/r/87r189a2ks.fsf@linux.ibm.com
Link: https://lkml.kernel.org/r/20220214174132.219303-3-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: John Garry via iommu <iommu@lists.linux-foundation.org>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Let's prepare our fake page onlining code for subblock size smaller than
MAX_ORDER - 1: we might get called for ranges not covering properly
aligned MAX_ORDER - 1 pages. We have to detect the order to use
dynamically.
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20211126134209.17332-3-david@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Eric Ren <renzhengeek@gmail.com>
Let's prepare our page onlining code for subblock size smaller than
MAX_ORDER - 1: we'll get called for a MAX_ORDER - 1 page but might have
some subblocks in the range plugged and some unplugged. In that case,
fallback to subblock granularity to properly only expose the plugged
parts to the buddy.
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20211126134209.17332-2-david@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Eric Ren <renzhengeek@gmail.com>
This will enable cleanups down the road.
The idea is to disable cbs, then add "flush_queued_cbs" callback
as a parameter, this way drivers can flush any work
queued after callbacks have been disabled.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://lore.kernel.org/r/20211013105226.20225-1-mst@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The initial virtio-mem spec states that while unplugged memory should not
be read, the device still has to allow for reading unplugged memory inside
the usable region. The primary motivation for this default handling was
to simplify bringup of virtio-mem, because there were corner cases where
Linux might have accidentially read unplugged memory inside added Linux
memory blocks.
In the meantime, we:
1. Removed /dev/kmem in commit bbcd53c960 ("drivers/char: remove
/dev/kmem for good")
2. Disallowed access to virtio-mem device memory via /dev/mem in
commit 2128f4e21a ("virtio-mem: disallow mapping virtio-mem memory via
/dev/mem")
3. Sanitized access to virtio-mem device memory via /proc/kcore in
commit 0daa322b8f ("fs/proc/kcore: don't read offline sections,
logically offline pages and hwpoisoned pages")
4. Sanitized access to virtio-mem device memory via /proc/vmcore in
commit ce2814622e ("virtio-mem: kdump mode to sanitize /proc/vmcore
access")
"Accidential" access to unplugged memory is no longer possible; we can
support the new VIRTIO_MEM_F_UNPLUGGED_INACCESSIBLE feature that will be
required by some hypervisors implementing virtio-mem in the near future.
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Marek Kedzierski <mkedzier@redhat.com>
Cc: Hui Zhu <teawater@gmail.com>
Cc: Sebastien Boeuf <sebastien.boeuf@intel.com>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: Wei Yang <richard.weiyang@linux.alibaba.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
We don't want user space to be able to map virtio-mem device memory
directly (e.g., via /dev/mem) in order to have guarantees that in a sane
setup we'll never accidentially access unplugged memory within the
device-managed region of a virtio-mem device, just as required by the
virtio-spec.
As soon as the virtio-mem driver is loaded, the device region is visible
in /proc/iomem via the parent device region. From that point on user
space is aware of the device region and we want to disallow mapping
anything inside that region (where we will dynamically (un)plug memory)
until the driver has been unloaded cleanly and e.g., another driver might
take over.
By creating our parent IORESOURCE_SYSTEM_RAM resource with
IORESOURCE_EXCLUSIVE, we will disallow any /dev/mem access to our device
region until the driver was unloaded cleanly and removed the parent
region. This will work even though only some memory blocks are actually
currently added to Linux and appear as busy in the resource tree.
So access to the region from user space is only possible
a) if we don't load the virtio-mem driver.
b) after unloading the virtio-mem driver cleanly.
Don't build virtio-mem if access to /dev/mem cannot be restricticted -- if
we have CONFIG_DEVMEM=y but CONFIG_STRICT_DEVMEM is not set.
Link: https://lkml.kernel.org/r/20210920142856.17758-4-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hanjun Guo <guohanjun@huawei.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Although virtio-mem currently supports reading unplugged memory in the
hypervisor, this will change in the future, indicated to the device via
a new feature flag.
We similarly sanitized /proc/kcore access recently. [1]
Let's register a vmcore callback, to allow vmcore code to check if a PFN
belonging to a virtio-mem device is either currently plugged and should
be dumped or is currently unplugged and should not be accessed, instead
mapping the shared zeropage or returning zeroes when reading.
This is important when not capturing /proc/vmcore via tools like
"makedumpfile" that can identify logically unplugged virtio-mem memory
via PG_offline in the memmap, but simply by e.g., copying the file.
Distributions that support virtio-mem+kdump have to make sure that the
virtio_mem module will be part of the kdump kernel or the kdump initrd;
dracut was recently [2] extended to include virtio-mem in the generated
initrd. As long as no special kdump kernels are used, this will
automatically make sure that virtio-mem will be around in the kdump
initrd and sanitize /proc/vmcore access -- with dracut.
With this series, we'll send one virtio-mem state request for every ~2
MiB chunk of virtio-mem memory indicated in the vmcore that we intend to
read/map.
In the future, we might want to allow building virtio-mem for kdump mode
only, even without CONFIG_MEMORY_HOTPLUG and friends: this way, we could
support special stripped-down kdump kernels that have many other config
options disabled; we'll tackle that once required. Further, we might
want to try sensing bigger blocks (e.g., memory sections) first before
falling back to device blocks on demand.
Tested with Fedora rawhide, which contains a recent kexec-tools version
(considering "System RAM (virtio_mem)" when creating the vmcore header)
and a recent dracut version (including the virtio_mem module in the
kdump initrd).
Link: https://lkml.kernel.org/r/20210526093041.8800-1-david@redhat.com [1]
Link: https://github.com/dracutdevs/dracut/pull/1157 [2]
Link: https://lkml.kernel.org/r/20211005121430.30136-10-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Let's prepare for a new virtio-mem kdump mode in which we don't actually
hot(un)plug any memory but only observe the state of device blocks.
Link: https://lkml.kernel.org/r/20211005121430.30136-9-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Let's prepare for a new virtio-mem kdump mode in which we don't actually
hot(un)plug any memory but only observe the state of device blocks.
Link: https://lkml.kernel.org/r/20211005121430.30136-8-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Let's prepare for a new virtio-mem kdump mode in which we don't actually
hot(un)plug any memory but only observe the state of device blocks.
Link: https://lkml.kernel.org/r/20211005121430.30136-7-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Let's use a single dynamic memory group.
Link: https://lkml.kernel.org/r/20210806124715.17090-8-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hui Zhu <teawater@gmail.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Marek Kedzierski <mkedzier@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wei Yang <richard.weiyang@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There is only a single user remaining. We can simply lookup the nid only
used for node offlining purposes when walking our memory blocks. We don't
expect to remove multi-nid ranges; and if we'd ever do, we most probably
don't care about removing multi-nid ranges that actually result in empty
nodes.
If ever required, we can detect the "multi-nid" scenario and simply try
offlining all online nodes.
Link: https://lkml.kernel.org/r/20210712124052.26491-4-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Len Brown <lenb@kernel.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Nathan Lynch <nathanl@linux.ibm.com>
Cc: Laurent Dufour <ldufour@linux.ibm.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com>
Cc: Scott Cheloha <cheloha@linux.ibm.com>
Cc: Anton Blanchard <anton@ozlabs.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Baoquan He <bhe@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jia He <justin.he@arm.com>
Cc: Joe Perches <joe@perches.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michel Lespinasse <michel@lespinasse.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Pankaj Gupta <pankaj.gupta@ionos.com>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Pierre Morel <pmorel@linux.ibm.com>
Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Cc: Rich Felker <dalias@libc.org>
Cc: Sergei Trofimovich <slyfox@gentoo.org>
Cc: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wei Yang <richard.weiyang@linux.alibaba.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
virtio_mem_set_fake_offline() might sleep now, and we call it under
rcu_read_lock(). To fix it, simply move the rcu_read_unlock() further
up, as we're done with the device.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: 6cc26d77613a: "virtio-mem: use page_offline_(start|end) when setting PageOffline()
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: virtualization@lists.linux-foundation.org
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Doorbell remapping for ifcvf, mlx5.
virtio_vdpa support for mlx5.
Validate device input in several drivers (for SEV and friends).
ZONE_MOVABLE aware handling in virtio-mem.
Misc fixes, cleanups.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmDm5jQPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRp6mYIAMTk5ggM5xdt6NCAASAigssEAoCTMorfoxkx
i7O562TEejgLvYKx/EZnYF+YpmYGyWEY9AgxMPxP/nPRLszuf0nZSmMp5ivu/vMz
zwpAto+7RpUmIQP+N6QjWabiWrpQI9EnXA47kOnyU703Y+RnITPNCvD1PpnDG3zs
W2GdH7DKqwsCY22hB+zboH2D6HNf3gTuUtgUBYbdBnYVxdOsSd1dx9Te0EKUTV3y
uvENmFEcushDRYpUhAsZm4bKcLOn+6rgNGXuXNa4R/hUlJTwrQjGmzu+ua6vfMwF
dcGxdaeMJUo8o0C1Pz7wJBXF5UZXQlxoyBP+0b0ZTm69AwmIHMY=
=o6A1
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio,vhost,vdpa updates from Michael Tsirkin:
- Doorbell remapping for ifcvf, mlx5
- virtio_vdpa support for mlx5
- Validate device input in several drivers (for SEV and friends)
- ZONE_MOVABLE aware handling in virtio-mem
- Misc fixes, cleanups
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (48 commits)
virtio-mem: prioritize unplug from ZONE_MOVABLE in Big Block Mode
virtio-mem: simplify high-level unplug handling in Big Block Mode
virtio-mem: prioritize unplug from ZONE_MOVABLE in Sub Block Mode
virtio-mem: simplify high-level unplug handling in Sub Block Mode
virtio-mem: simplify high-level plug handling in Sub Block Mode
virtio-mem: use page_zonenum() in virtio_mem_fake_offline()
virtio-mem: don't read big block size in Sub Block Mode
virtio/vdpa: clear the virtqueue state during probe
vp_vdpa: allow set vq state to initial state after reset
virtio-pci library: introduce vp_modern_get_driver_features()
vdpa: support packed virtqueue for set/get_vq_state()
virtio-ring: store DMA metadata in desc_extra for split virtqueue
virtio: use err label in __vring_new_virtqueue()
virtio_ring: introduce virtqueue_desc_add_split()
virtio_ring: secure handling of mapping errors
virtio-ring: factor out desc_extra allocation
virtio_ring: rename vring_desc_extra_packed
virtio-ring: maintain next in extra state for packed virtqueue
vdpa/mlx5: Clear vq ready indication upon device reset
vdpa/mlx5: Add support for doorbell bypassing
...
Let's handle unplug in Big Block Mode similar to Sub Block Mode --
prioritize memory blocks onlined to ZONE_MOVABLE.
We won't care further about big blocks with mixed zones, as it's
rather a corner case that won't matter in practice.
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20210602185720.31821-8-david@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Let's simplify high-level big block selection when unplugging in
Big Block Mode.
Combine handling of offline and online blocks. We can get rid of
virtio_mem_bbm_bb_is_offline() and simply use
virtio_mem_bbm_offline_remove_and_unplug_bb(), as that already tolerates
offline parts.
We can race with concurrent onlining/offlining either way, so we don;t
have to be super correct by failing if an offline big block we'd like to
unplug just got (partially) onlined.
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20210602185720.31821-7-david@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Until now, memory provided by a single virtio-mem device was usually
either onlined completely to ZONE_MOVABLE (online_movable) or to
ZONE_NORMAL (online_kernel); however, that will change in the future.
There are two reasons why we want to track to which zone a memory blocks
belongs to and prioritize ZONE_MOVABLE blocks:
1) Memory managed by ZONE_MOVABLE can more likely get unplugged, therefore,
resulting in a faster memory hotunplug process. Further, we can more
reliably unplug and remove complete memory blocks, removing metadata
allocated for the whole memory block.
2) We want to avoid corner cases where unplugging with the current scheme
(highest to lowest address) could result in accidential zone imbalances,
whereby we remove too much ZONE_NORMAL memory for ZONE_MOVABLE memory
of the same device.
Let's track the zone via memory block states and try unplug from
ZONE_MOVABLE first. Rename VIRTIO_MEM_SBM_MB_ONLINE* to
VIRTIO_MEM_SBM_MB_KERNEL* to avoid even longer state names.
In commit 27f852795a ("virtio-mem: don't special-case ZONE_MOVABLE"),
we removed slightly similar tracking for fully plugged memory blocks to
support unplugging from ZONE_MOVABLE at all -- as we didn't allow partially
plugged memory blocks in ZONE_MOVABLE before that. That commit already
mentioned "In the future, we might want to remember the zone again and use
the information when (un)plugging memory."
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20210602185720.31821-6-david@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Let's simplify by introducing a new virtio_mem_sbm_unplug_any_sb(),
similar to virtio_mem_sbm_plug_any_sb(), to simplify high-level memory
block selection when unplugging in Sub Block Mode.
Rename existing virtio_mem_sbm_unplug_any_sb() to
virtio_mem_sbm_unplug_any_sb_raw().
The only change is that we now temporarily unlock the hotplug mutex around
cond_resched() when processing offline memory blocks, which doesn't
make a real difference as we already have to temporarily unlock in
virtio_mem_sbm_unplug_any_sb_offline() when removing a memory block.
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20210602185720.31821-5-david@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Let's simplify high-level memory block selection when plugging in Sub
Block Mode.
No need for two separate loops when selecting memory blocks for plugging
memory. Avoid passing the "online" state by simply obtaining the state
in virtio_mem_sbm_plug_any_sb().
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20210602185720.31821-4-david@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We are reading a Big Block Mode value while in Sub Block Mode
when initializing. Fortunately, vm->bbm.bb_size maps to some counter
in the vm->sbm.mb_count array, which is 0 at that point in time.
No harm done; still, this was unintended and is not future-proof.
Fixes: 4ba50cd335 ("virtio-mem: Big Block Mode (BBM) memory hotplug")
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20210602185720.31821-2-david@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Let's properly use page_offline_(start|end) to synchronize setting
PageOffline(), so we won't have valid page access to unplugged memory
regions from /proc/kcore.
Existing balloon implementations usually allow reading inflated memory;
doing so might result in unnecessary overhead in the hypervisor, which is
currently the case with virtio-mem.
For future virtio-mem use cases, it will be different when using shmem,
huge pages, !anonymous private mappings, ... as backing storage for a VM.
virtio-mem unplugged memory must no longer be accessed and access might
result in undefined behavior. There will be a virtio spec extension to
document this change, including a new feature flag indicating the changed
behavior. We really don't want to race against PFN walkers reading random
page content.
Link: https://lkml.kernel.org/r/20210526093041.8800-6-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Aili Yao <yaoaili@kingsoft.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Alex Shi <alex.shi@linux.alibaba.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jiri Bohac <jbohac@suse.cz>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Steven Price <steven.price@arm.com>
Cc: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge more updates from Andrew Morton:
"118 patches:
- The rest of MM.
Includes kfence - another runtime memory validator. Not as thorough
as KASAN, but it has unmeasurable overhead and is intended to be
usable in production builds.
- Everything else
Subsystems affected by this patch series: alpha, procfs, sysctl,
misc, core-kernel, MAINTAINERS, lib, bitops, checkpatch, init,
coredump, seq_file, gdb, ubsan, initramfs, and mm (thp, cma,
vmstat, memory-hotplug, mlock, rmap, zswap, zsmalloc, cleanups,
kfence, kasan2, and pagemap2)"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (118 commits)
MIPS: make userspace mapping young by default
initramfs: panic with memory information
ubsan: remove overflow checks
kgdb: fix to kill breakpoints on initmem after boot
scripts/gdb: fix list_for_each
x86: fix seq_file iteration for pat/memtype.c
seq_file: document how per-entry resources are managed.
fs/coredump: use kmap_local_page()
init/Kconfig: fix a typo in CC_VERSION_TEXT help text
init: clean up early_param_on_off() macro
init/version.c: remove Version_<LINUX_VERSION_CODE> symbol
checkpatch: do not apply "initialise globals to 0" check to BPF progs
checkpatch: don't warn about colon termination in linker scripts
checkpatch: add kmalloc_array_node to unnecessary OOM message check
checkpatch: add warning for avoiding .L prefix symbols in assembly files
checkpatch: improve TYPECAST_INT_CONSTANT test message
checkpatch: prefer ftrace over function entry/exit printks
checkpatch: trivial style fixes
checkpatch: ignore warning designated initializers using NR_CPUS
checkpatch: improve blank line after declaration test
...
Right now, we only check against MAX_PHYSMEM_BITS - but turns out there
are more restrictions of which memory we can actually hotplug, especially
om arm64 or s390x once we support them: we might receive something like
-E2BIG or -ERANGE from add_memory_driver_managed(), stopping device
operation.
So, check right when initializing the device which memory we can add,
warning the user. Try only adding actually pluggable ranges: in the worst
case, no memory provided by our device is pluggable.
In the usual case, we expect all device memory to be pluggable, and in
corner cases only some memory at the end of the device-managed memory
region to not be pluggable.
Link: https://lkml.kernel.org/r/1612149902-7867-5-git-send-email-anshuman.khandual@arm.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Wei Yang <richard.weiyang@linux.alibaba.com>
Cc: teawater <teawaterz@linux.alibaba.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Pankaj Gupta <pankaj.gupta@cloud.ionos.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Let's make "MEMHP_MERGE_RESOURCE" consistent with "MHP_NONE", "mhp_t" and
"mhp_flags". As discussed recently [1], "mhp" is our internal acronym for
memory hotplug now.
[1] https://lore.kernel.org/linux-mm/c37de2d0-28a1-4f7d-f944-cfd7d81c334d@redhat.com/
Link: https://lkml.kernel.org/r/20210126115829.10909-1-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Acked-by: Wei Liu <wei.liu@kernel.org>
Reviewed-by: Pankaj Gupta <pankaj.gupta@cloud.ionos.com>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Wei Yang <richard.weiyang@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix the following coccicheck warnings:
./drivers/virtio/virtio_mem.c:2580:2-25: WARNING: Assignment
of 0/1 to bool variable.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Zhong <abaci-bugfix@linux.alibaba.com>
Link: https://lore.kernel.org/r/1611129031-82818-1-git-send-email-abaci-bugfix@linux.alibaba.com
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Acked-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Let's add a safe mechanism to unplug memory, avoiding long/endless loops
when trying to offline memory - similar to in SBM.
Fake-offline all memory (via alloc_contig_range()) before trying to
offline+remove it. Use this mode as default, but allow to enable the other
mode explicitly (which could give better memory hotunplug guarantees in
some environments).
The "unsafe" mode can be enabled e.g., via virtio_mem.bbm_safe_unplug=0
on the cmdline.
Reviewed-by: Wei Yang <richard.weiyang@linux.alibaba.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Wei Yang <richard.weiyang@linux.alibaba.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20201112133815.13332-30-david@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Let's try to unplug completely offline big blocks first. Then, (if
enabled via unplug_offline) try to offline and remove whole big blocks.
No locking necessary - we can deal with concurrent onlining/offlining
just fine.
Note1: This is sub-optimal and might be dangerous in some environments: we
could end up in an infinite loop when offlining (e.g., long-term pinnings),
similar as with DIMMs. We'll introduce safe memory hotunplug via
fake-offlining next, and use this basic mode only when explicitly enabled.
Note2: Without ZONE_MOVABLE, memory unplug will be extremely unreliable
with bigger block sizes.
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Wei Yang <richard.weiyang@linux.alibaba.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20201112133815.13332-29-david@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Let's allow to force BBM, even if subblocks would be possible. Take care
of properly calculating the first big block id, because the start
address might no longer be aligned to the big block size.
Also, allow to manually configure the size of Big Blocks.
Reviewed-by: Wei Yang <richard.weiyang@linux.alibaba.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Wei Yang <richard.weiyang@linux.alibaba.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20201112133815.13332-27-david@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Currently, we do not support device block sizes that exceed the Linux
memory block size. For example, having a device block size of 1 GiB (e.g.,
gigantic pages in the hypervisor) won't work with 128 MiB Linux memory
blocks.
Let's implement Big Block Mode (BBM), whereby we add/remove at least
one Linux memory block at a time. With a 1 GiB device block size, a Big
Block (BB) will cover 8 Linux memory blocks.
We'll keep registering the online_page_callback machinery, it will be used
for safe memory hotunplug in BBM next.
Note: BBM is properly prepared for variable-sized Linux memory
blocks that we might see in the future. So we won't care how many Linux
memory blocks a big block actually spans, and how the memory notifier is
called.
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Wei Yang <richard.weiyang@linux.alibaba.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20201112133815.13332-26-david@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Let's use wrappers for the low-level functions that dev_dbg/dev_warn
and work on addr + size, such that we can reuse them for adding/removing
in other granularity.
We only warn when adding memory failed, because that's something to pay
attention to. We won't warn when removing failed, we'll reuse that in
racy context soon (and we do have proper BUG_ON() statements in the
current cases where it must never happen).
Reviewed-by: Wei Yang <richard.weiyang@linux.alibaba.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20201112133815.13332-25-david@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Let's rename accordingly.
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20201112133815.13332-24-david@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Let's rename them accordingly. virtio_mem_plug_request() and
virtio_mem_unplug_request() will be handled separately.
Reviewed-by: Wei Yang <richard.weiyang@linux.alibaba.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20201112133815.13332-23-david@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Let's move first_mb_id/next_mb_id/last_usable_mb_id accordingly.
Reviewed-by: Wei Yang <richard.weiyang@linux.alibaba.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20201112133815.13332-22-david@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Let's rename to "sbs_per_mb" and "sb_size" and move accordingly.
Reviewed-by: Wei Yang <richard.weiyang@linux.alibaba.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20201112133815.13332-21-david@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Let's rename and move accordingly. While at it, rename sb_bitmap to
"sb_states".
Reviewed-by: Wei Yang <richard.weiyang@linux.alibaba.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20201112133815.13332-20-david@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
let's use a new "sbm" sub-struct to hold SBM-specific state and rename +
move applicable definitions, functions, and variables (related to
memory block states).
While at it:
- Drop the "_STATE" part from memory block states
- Rename "nb_mb_state" to "mb_count"
- "set_mb_state" / "get_mb_state" vs. "mb_set_state" / "mb_get_state"
- Don't use lengthy "enum virtio_mem_smb_mb_state", simply use "uint8_t"
Reviewed-by: Wei Yang <richard.weiyang@linux.alibaba.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20201112133815.13332-19-david@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Let's add some documentation for the current mode - Sub Block Mode (SBM) -
to prepare for a new mode - Big Block Mode (BBM).
Follow-up patches will properly factor out the existing Sub Block Mode
(SBM) and implement Big Block Mode (BBM).
Reviewed-by: Wei Yang <richard.weiyang@linux.alibaba.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20201112133815.13332-18-david@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We don't want to add too much memory when it's not getting onlined
immediately, to avoid running OOM. Generalize the handling, to avoid
making use of memory block states. Use a threshold of 1 GiB for now.
Properly adjust the offline size when adding/removing memory. As we are
not always protected by a lock when touching the offline size, use an
atomic64_t. We don't care about races (e.g., someone offlining memory
while we are adding more), only about consistent values.
(1 GiB needs a memmap of ~16MiB - which sounds reasonable even for
setups with little boot memory and (possibly) one virtio-mem device per
node)
We don't want to retrigger when onlining is caused immediately by our
action (e.g., adding memory which immediately gets onlined), so use a
flag to indicate if the workqueue is active and use that as an
indicator whether to trigger a retry. This will also be especially relevant
for Big Block Mode (BBM), whereby we might re-online memory in case
offlining of another memory block failed.
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20201112133815.13332-17-david@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Let's trigger from offlining code only when we're not allowed to unplug
online memory. Handle the other case (memmap possibly freeing up another
memory block) when actually removing memory. We now also properly handle
the case when removing already offline memory blocks via
virtio_mem_mb_remove(). When removing via virtio_mem_remove(), when
unloading the driver, virtio_mem_retry() is a NOP and safe to use.
While at it, move retry handling when offlining out of
virtio_mem_notify_offline(), to share it with Big Block Mode (BBM)
soon.
This is a preparation for Big Block Mode (BBM), whereby we can see some
temporary offlining of memory blocks without actually making progress.
Imagine you have a Big Block that spans to Linux memory blocks. Assume
the first Linux memory blocks has no unmovable data on it. When we would
call offline_and_remove_memory() on the big block, we would
1. Try to offline the first block. Works, notifiers triggered.
virtio_mem_retry() called.
2. Try to offline the second block. Does not work.
3. Re-online first block.
4. Exit to main loop, exit workqueue.
5. Retry immediately (due to virtio_mem_retry()), go to 1.
The result are endless retries.
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20201112133815.13332-16-david@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
No longer used, let's drop it.
Reviewed-by: Wei Yang <richard.weiyang@linux.alibaba.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20201112133815.13332-15-david@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Kirill A. Shutemov