The counter_get_ext() function would incorrectly refer to the first
element of the extensions array to handle component array extensions
when they are located at a different index; a fix is provided to index
to the correct element in the array for this case. A fix for the
microchip-tcb-capture is provided as well to correct an inverted
internal GCLK logic for clock selection.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSNN83d4NIlKPjon7a1SFbKvhIjKwUCZPpOEgAKCRC1SFbKvhIj
KxAlAQCyTD0T0wA4iMegviHRb/Rw66Ae42XzmEUiwCjAPY+F4wD/ZJ5ULT+Tq0fE
uJJIhrj3vNglngt7rbCboJ2Ve1jyPgs=
=1Ztq
-----END PGP SIGNATURE-----
Merge tag 'counter-fixes-for-6.6a' of git://git.kernel.org/pub/scm/linux/kernel/git/wbg/counter into char-misc-linus
William writes:
First set of Counter fixes for 6.6
The counter_get_ext() function would incorrectly refer to the first
element of the extensions array to handle component array extensions
when they are located at a different index; a fix is provided to index
to the correct element in the array for this case. A fix for the
microchip-tcb-capture is provided as well to correct an inverted
internal GCLK logic for clock selection.
* tag 'counter-fixes-for-6.6a' of git://git.kernel.org/pub/scm/linux/kernel/git/wbg/counter:
counter: microchip-tcb-capture: Fix the use of internal GCLK logic
counter: chrdev: fix getting array extensions
As per the datasheet, the clock selection Bits 2:0 – TCCLKS[2:0] should
be set to 0 while using the internal GCLK (TIMER_CLOCK1).
Fixes: 106b104137 ("counter: Add microchip TCB capture counter")
Signed-off-by: Dharma Balasubiramani <dharma.b@microchip.com>
Link: https://lore.kernel.org/r/20230905100835.315024-1-dharma.b@microchip.com
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
- Add support for the Cirrus Logic CS42L43 Audio CODEC
- Fix-ups
- Make use of specific printk() format tags for various optimisations
- Kconfig / module modifications / tweaking
- Simplify obtaining resources (memory, device data) using unified API helpers
- Bunch of Device Tree additions, conversions and adaptions
- Convert a bunch of Regmap configurations to use the Maple Tree cache
- Ensure correct includes are present and remove some that are not required
- Remove superfluous code
- Reduce amount of cycles spent in critical sections
- Omit the use of redundant casts and if relevant replace with better ones
- Swap out raw_spin_{un}lock_irq{save,restore}() for spin_{un}lock_irq{save,restore}()
- Bug Fixes
- Repair theoretical deadlock situation
- Fix some link-time dependencies
- Use more appropriate datatype when casting
-----BEGIN PGP SIGNATURE-----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=MNYe
-----END PGP SIGNATURE-----
Merge tag 'mfd-next-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull NFD updates from Lee Jones:
"New Drivers:
- Add support for the Cirrus Logic CS42L43 Audio CODEC
Fix-ups:
- Make use of specific printk() format tags for various optimisations
- Kconfig / module modifications / tweaking
- Simplify obtaining resources (memory, device data) using unified
API helpers
- Bunch of Device Tree additions, conversions and adaptions
- Convert a bunch of Regmap configurations to use the Maple Tree
cache
- Ensure correct includes are present and remove some that are not
required
- Remove superfluous code
- Reduce amount of cycles spent in critical sections
- Omit the use of redundant casts and if relevant replace with better
ones
- Swap out raw_spin_{un}lock_irq{save,restore}() for
spin_{un}lock_irq{save,restore}()
Bug Fixes:
- Repair theoretical deadlock situation
- Fix some link-time dependencies
- Use more appropriate datatype when casting"
* tag 'mfd-next-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (70 commits)
mfd: mc13xxx: Simplify device data fetching in probe()
mfd: rz-mtu3: Replace raw_spin_lock->spin_lock()
mfd: rz-mtu3: Reduce critical sections
mfd: mxs-lradc: Fix Wvoid-pointer-to-enum-cast warning
mfd: wm31x: Fix Wvoid-pointer-to-enum-cast warning
mfd: wm8994: Fix Wvoid-pointer-to-enum-cast warning
mfd: tc3589: Fix Wvoid-pointer-to-enum-cast warning
mfd: lp87565: Fix Wvoid-pointer-to-enum-cast warning
mfd: hi6421-pmic: Fix Wvoid-pointer-to-enum-cast warning
mfd: max77541: Fix Wvoid-pointer-to-enum-cast warning
mfd: max14577: Fix Wvoid-pointer-to-enum-cast warning
mfd: stmpe: Fix Wvoid-pointer-to-enum-cast warning
mfd: rn5t618: Remove redundant of_match_ptr()
mfd: lochnagar-i2c: Remove redundant of_match_ptr()
mfd: stpmic1: Remove redundant of_match_ptr()
mfd: act8945a: Remove redundant of_match_ptr()
mfd: rsmu_spi: Remove redundant of_match_ptr()
mfd: altera-a10sr: Remove redundant of_match_ptr()
mfd: rsmu_i2c: Remove redundant of_match_ptr()
mfd: tc3589x: Remove redundant of_match_ptr()
...
When trying to watch a component array extension, and the array isn't the
first extended element, it fails as the type comparison is always done on
the 1st element. Fix it by indexing the 'ext' array.
Example on a dummy struct counter_comp:
static struct counter_comp dummy[] = {
COUNTER_COMP_DIRECTION(..),
...,
COUNTER_COMP_ARRAY_CAPTURE(...),
};
static struct counter_count dummy_cnt = {
...
.ext = dummy,
.num_ext = ARRAY_SIZE(dummy),
}
Currently, counter_get_ext() returns -EINVAL when trying to add a watch
event on one of the capture array element in such example.
Fixes: d2011be1e2 ("counter: Introduce the COUNTER_COMP_ARRAY component type")
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Link: https://lore.kernel.org/r/20230829134029.2402868-2-fabrice.gasnier@foss.st.com
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
The new set of drivers for RZ/G2L MTU3a tries to enable compile-testing the
individual client drivers even when the MFD portion is disabled but gets it
wrong, causing a link failure when the core is in a loadable module but the
other drivers are built-in:
x86_64-linux-ld: drivers/pwm/pwm-rz-mtu3.o: in function `rz_mtu3_pwm_apply':
pwm-rz-mtu3.c:(.text+0x4bf): undefined reference to `rz_mtu3_8bit_ch_write'
x86_64-linux-ld: pwm-rz-mtu3.c:(.text+0x509): undefined reference to `rz_mtu3_disable'
arm-linux-gnueabi-ld: drivers/counter/rz-mtu3-cnt.o: in function `rz_mtu3_cascade_counts_enable_get':
rz-mtu3-cnt.c:(.text+0xbec): undefined reference to `rz_mtu3_shared_reg_read'
It seems better not to add the extra complexity here but instead just use
a normal hard dependency, so remove the #else portion in the header along
with the "|| COMPILE_TEST". This could also be fixed by having slightly more
elaborate Kconfig dependencies or using the cursed 'IS_REACHABLE()' helper,
but in practice it's already possible to compile-test all these drivers
by enabling the mtd portion.
Fixes: 254d3a7274 ("pwm: Add Renesas RZ/G2L MTU3a PWM driver")
Fixes: 0be8907359 ("counter: Add Renesas RZ/G2L MTU3a counter driver")
Fixes: 654c293e16 ("mfd: Add Renesas RZ/G2L MTU3a core driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thierry Reding <thierry.reding@gmail.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20230719090430.1925182-1-arnd@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230714174357.4053541-1-robh@kernel.org/
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
In commit d428487471 ("counter: i8254: Introduce the Intel 8254
interface library module"), the misplacement of the I8254 Kconfig entry
results in the "Counter support" submenu items disappearing in
menuconfig. A fix is provided to reposition the I8254 Kconfig entry to
restore the intended submenu behavior.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSNN83d4NIlKPjon7a1SFbKvhIjKwUCZJoKsAAKCRC1SFbKvhIj
K3JGAQDIzr7hWxQhcTm5/H7A/Vg5InFetpKOUXSMh1yIhc7veQD/XQ7tt7qocpLz
h69UcZGkbtEj7sGK/LY8jCL5mV77cQQ=
=0QaM
-----END PGP SIGNATURE-----
Merge tag 'counter-fixes-for-6.5a' of git://git.kernel.org/pub/scm/linux/kernel/git/wbg/counter into char-misc-linus
William writes:
First set of Counter fixes for 6.5
In commit d428487471 ("counter: i8254: Introduce the Intel 8254
interface library module"), the misplacement of the I8254 Kconfig entry
results in the "Counter support" submenu items disappearing in
menuconfig. A fix is provided to reposition the I8254 Kconfig entry to
restore the intended submenu behavior.
* tag 'counter-fixes-for-6.5a' of git://git.kernel.org/pub/scm/linux/kernel/git/wbg/counter:
counter: Fix menuconfig "Counter support" submenu entries disappearance
The current placement of the I8254 Kconfig entry results in the
disappearance of the "Counter support" submenu items in menuconfig. Move
the I8254 above the menuconfig COUNTER entry to restore the intended
submenu behavior.
Fixes: d428487471 ("counter: i8254: Introduce the Intel 8254 interface library module")
Reported-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Closes: https://lore.kernel.org/all/32ddaa7b-53a8-d61f-d526-b545bd561337@linux.intel.com/
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Link: https://lore.kernel.org/r/20230620170159.556788-1-william.gray@linaro.org/
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Biggest changes in this set include the introduction of a new Intel 8254
interface library module and the refactoring of the existing 104-quad-8
modules to migrate it to the regmap API. Some other minor cleanups
touching tools/counter and stm32-timer-cnt are also present.
Changes
* 104-quad-8
- Remove reference in Kconfig to 25-bit counter value
- Utilize bitfield access macros
- Refactor to buffer states for CMR, IOR, and IDR
- Utilize helper functions to handle PR, FLAG and PSC
- Migrate to the regmap API
* i8254
- Introduce the Intel 8254 interface library module
* stm32-timer-cnt
- Reset TIM_TISEL to its default value in probe
* tools/counter
- Add .gitignore
- Remove lingering 'include' directories on make clean
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSNN83d4NIlKPjon7a1SFbKvhIjKwUCZIihZQAKCRC1SFbKvhIj
K1wZAQCnujwsCYExil8fCHgdXufA+KsC5J4Clay7CLq5KmUdgwD+P9EJ5Hd37OeO
tAV6Pt4yEmQQBfXQgMdD2lk1yf0iGg8=
=r3E4
-----END PGP SIGNATURE-----
Merge tag 'counter-updates-for-6.5a' of git://git.kernel.org/pub/scm/linux/kernel/git/wbg/counter into char-misc-next
William writes:
First set of Counter updates for the 6.5 cycle
Biggest changes in this set include the introduction of a new Intel 8254
interface library module and the refactoring of the existing 104-quad-8
modules to migrate it to the regmap API. Some other minor cleanups
touching tools/counter and stm32-timer-cnt are also present.
Changes
* 104-quad-8
- Remove reference in Kconfig to 25-bit counter value
- Utilize bitfield access macros
- Refactor to buffer states for CMR, IOR, and IDR
- Utilize helper functions to handle PR, FLAG and PSC
- Migrate to the regmap API
* i8254
- Introduce the Intel 8254 interface library module
* stm32-timer-cnt
- Reset TIM_TISEL to its default value in probe
* tools/counter
- Add .gitignore
- Remove lingering 'include' directories on make clean
* tag 'counter-updates-for-6.5a' of git://git.kernel.org/pub/scm/linux/kernel/git/wbg/counter:
counter: i8254: Introduce the Intel 8254 interface library module
counter: 104-quad-8: Migrate to the regmap API
counter: 104-quad-8: Utilize helper functions to handle PR, FLAG and PSC
counter: 104-quad-8: Refactor to buffer states for CMR, IOR, and IDR
counter: 104-quad-8: Utilize bitfield access macros
tools/counter: Makefile: Remove lingering 'include' directories on make clean
tools/counter: Add .gitignore
counter: stm32-timer-cnt: Reset TIM_TISEL to its default value in probe
counter: 104-quad-8: Remove reference in Kconfig to 25-bit counter value
Exposes consumer library functions providing support for interfaces
compatible with the venerable Intel 8254 Programmable Interval Timer
(PIT).
The Intel 8254 PIT first appeared in the early 1980s and was used
initially in IBM PC compatibles. The popularity of the original Intel
825x family of chips led to many subsequent variants and clones of the
interface in various chips and integrated circuits. Although still
popular, interfaces compatible with the Intel 8254 PIT are nowdays
typically found embedded in larger VLSI processing chips and FPGA
components rather than as discrete ICs.
A CONFIG_I8254 Kconfig option is introduced by this patch. Modules
wanting access to these i8254 library functions should select this
Kconfig option, and import the I8254 symbol namespace.
Link: https://lore.kernel.org/r/f6fe32c2db9525d816ab1a01f45abad56c081652.1681665189.git.william.gray@linaro.org/
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
The 104_QUAD_8 counter driver uses devm_ioport_map() without depending
on HAS_IOPORT_MAP. This means the driver is not usable on platforms such
as s390 which do not support I/O port mapping. Add the missing
HAS_IOPORT_MAP dependency to make this explicit.
Co-developed-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Link: https://lore.kernel.org/r/20230522105049.1467313-8-schnelle@linux.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The regmap API supports IO port accessors so we can take advantage of
regmap abstractions rather than handling access to the device registers
directly in the driver. With regmap we get boundary checks, read-write
permissions, operation synchronization locks, and more for free. Most
important of all, rather than rolling our own we utilize implementations
that are known to work and gain from any future improvements and fixes
that come.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/1f1f7920d2be94aedb6fdf49f429fe6137c8cb24.1681753140.git.william.gray@linaro.org/
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
The 104-quad-8 driver buffers the device configuration states
separately, however each device has only three control registers: CMR,
IOR, and IDR. Refactoring to buffer the states of these control
registers rather than each configuration separately results in succinct
code that more closely matches what is happening on the device.
Link: https://lore.kernel.org/r/48071415aed43ecdd8595174191b0d906205a9e3.1681753140.git.william.gray@linaro.org/
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
The driver assumes that the input selection register (TIM_TISEL) is at
its reset default value. Usually this is the case, but the bootloader
might have modified it.
This bases on a similar patch submitted by Olivier Moysan for pwm-stm32.
Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230413212339.3611722-1-u.kleine-koenig@pengutronix.de/
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Support for 25-bit counter values was removed in commit 4aa3b75c74
("counter: 104-quad-8: Fix race condition between FLAG and CNTR reads").
Adjust the Kconfig description of CONFIG_104_QUAD_8 to remove reference
of 25-bit counter values.
Link: https://lore.kernel.org/r/20230410134516.102886-1-william.gray@linaro.org/
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
- Add support for Renesas RZ/G2L MTU3
- New Device Support
- Add support for Lenovo Yoga Book X90F to Intel CHT WC
- Add support for MAX5970 and MAX5978 to Simple MFD (I2C)
- Add support for Meteor Lake PCH-S LPSS PCI to Intel LPSS PCI
- Add support for AXP15060 PMIC to X-Powers PMIC collection
- Remove Device Support
- Remove support for Samsung 5M8751 and S5M8763 PMIC devices
- New Functionality
- Convert deprecated QCOM IRQ Chip to config registers
- Add support for 32-bit address spaces to Renesas SMUs
- Fix-ups
- Make use of APIs / MACROs designed to simplify and demystify
- Add / improve Device Tree bindings
- Memory saving struct layout optimisations
- Remove old / deprecated functionality
- Factor out unassigned register addresses from ranges
- Trivial: Spelling fixes, renames and coding style fixes
- Rid 'defined but not used' warnings
- Remove ineffective casts and pointer stubs
- Bug Fixes
- Fix incorrectly non-inverted mask/unmask IRQs on QCOM platforms
- Remove MODULE_*() helpers from non-tristate drivers
- Do not attempt to use out-of-range memory addresses associated with io_base
- Provide missing export helpers
- Fix remap bulk read optimisation fallout
- Fix memory leak issues in error paths
-----BEGIN PGP SIGNATURE-----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=EBtX
-----END PGP SIGNATURE-----
Merge tag 'mfd-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"New Drivers:
- Add support for Renesas RZ/G2L MTU3
New Device Support:
- Add support for Lenovo Yoga Book X90F to Intel CHT WC
- Add support for MAX5970 and MAX5978 to Simple MFD (I2C)
- Add support for Meteor Lake PCH-S LPSS PCI to Intel LPSS PCI
- Add support for AXP15060 PMIC to X-Powers PMIC collection
Remove Device Support:
- Remove support for Samsung 5M8751 and S5M8763 PMIC devices
New Functionality:
- Convert deprecated QCOM IRQ Chip to config registers
- Add support for 32-bit address spaces to Renesas SMUs
Fix-ups:
- Make use of APIs / MACROs designed to simplify and demystify
- Add / improve Device Tree bindings
- Memory saving struct layout optimisations
- Remove old / deprecated functionality
- Factor out unassigned register addresses from ranges
- Trivial: Spelling fixes, renames and coding style fixes
- Rid 'defined but not used' warnings
- Remove ineffective casts and pointer stubs
Bug Fixes:
- Fix incorrectly non-inverted mask/unmask IRQs on QCOM platforms
- Remove MODULE_*() helpers from non-tristate drivers
- Do not attempt to use out-of-range memory addresses associated with io_base
- Provide missing export helpers
- Fix remap bulk read optimisation fallout
- Fix memory leak issues in error paths"
* tag 'mfd-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (88 commits)
dt-bindings: mfd: ti,j721e-system-controller: Add SoC chip ID
leds: bd2606mvv: Driver for the Rohm 6 Channel i2c LED driver
dt-bindings: mfd: qcom,spmi-pmic: Document flash LED controller
dt-bindings: mfd: x-powers,axp152: Document the AXP15060 variant
mfd: axp20x: Add support for AXP15060 PMIC
dt-bindings: mfd: x-powers,axp152: Document the AXP313a variant
counter: rz-mtu3-cnt: Unlock on error in rz_mtu3_count_ceiling_write()
dt-bindings: mfd: dlg,da9063: Document voltage monitoring
dt-bindings: mfd: stm32: Remove unnecessary blank lines
dt-bindings: mfd: qcom,spmi-pmic: Use generic ADC node name in examples
dt-bindings: mfd: syscon: Add nuvoton,ma35d1-sys compatible
MAINTAINERS: Add entries for Renesas RZ/G2L MTU3a counter driver
counter: Add Renesas RZ/G2L MTU3a counter driver
Documentation: ABI: sysfs-bus-counter: add cascade_counts_enable and external_input_phase_clock_select
mfd: Add Renesas RZ/G2L MTU3a core driver
dt-bindings: timer: Document RZ/G2L MTU3a bindings
mfd: rsmu_i2c: Convert to i2c's .probe_new() again
mfd: intel-lpss: Add Intel Meteor Lake PCH-S LPSS PCI IDs
mfd: dln2: Fix memory leak in dln2_probe()
mfd: axp20x: Fix axp288 writable-ranges
...
These error paths need to call mutex_unlock(&priv->lock) before
returning. The lock is taken in rz_mtu3_lock_if_counter_is_valid().
Fixes: 25d21447d896 ("counter: Add Renesas RZ/G2L MTU3a counter driver")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: William Breathitt Gray <william.gray@linaro.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/7b535d6b-6031-493a-84f6-82842089e637@kili.mountain
Add RZ/G2L MTU3a counter driver. This IP supports the following
phase counting modes on MTU1 and MTU2 channels
1) 16-bit phase counting modes on MTU1 and MTU2 channels.
2) 32-bit phase counting mode by cascading MTU1 and MTU2 channels.
This patch adds 3 counter value channels.
count0: 16-bit phase counter value channel on MTU1
count1: 16-bit phase counter value channel on MTU2
count2: 32-bit phase counter value channel by cascading
MTU1 and MTU2 channels.
The external input phase clock pin for the counter value channels
are as follows:
count0: "MTCLKA-MTCLKB"
count1: "MTCLKA-MTCLKB" or "MTCLKC-MTCLKD"
count2: "MTCLKA-MTCLKB" or "MTCLKC-MTCLKD"
Use the sysfs variable "external_input_phase_clock_select" to select the
external input phase clock pin and "cascade_counts_enable" to enable/
disable cascading of channels.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: William Breathitt Gray <william.gray@linaro.org>
Acked-by: William Breathitt Gray <william.gray@linaro.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230330111632.169434-5-biju.das.jz@bp.renesas.com
Signal 16 and higher represent the device's Index lines. The
priv->preset_enable array holds the device configuration for these Index
lines. The preset_enable configuration is active low on the device, so
invert the conditional check in quad8_action_read() to properly handle
the logical state of preset_enable.
Fixes: f1d8a071d4 ("counter: 104-quad-8: Add Generic Counter interface support")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230316203426.224745-1-william.gray@linaro.org/
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
The Counter (CNTR) register is 24 bits wide, but we can have an
effective 25-bit count value by setting bit 24 to the XOR of the Borrow
flag and Carry flag. The flags can be read from the FLAG register, but a
race condition exists: the Borrow flag and Carry flag are instantaneous
and could change by the time the count value is read from the CNTR
register.
Since the race condition could result in an incorrect 25-bit count
value, remove support for 25-bit count values from this driver;
hard-coded maximum count values are replaced by a LS7267_CNTR_MAX define
for consistency and clarity.
Fixes: 28e5d3bb03 ("iio: 104-quad-8: Add IIO support for the ACCES 104-QUAD-8")
Cc: <stable@vger.kernel.org> # 6.1.x
Cc: <stable@vger.kernel.org> # 6.2.x
Link: https://lore.kernel.org/r/20230312231554.134858-1-william.gray@linaro.org/
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Commit dfeef15e73 ("counter: microchip-tcp-capture: Add appropriate arch
deps for TCP driver") intends to add appropriate dependencies for the
config MICROCHIP_TCB_CAPTURE. It however prefixes the intended configs with
CONFIG, but in Kconfig files in contrast to source files, the configs are
referenced to without prefixing them with CONFIG.
Fix the dependency references due to this minor misconception.
Fixes: dfeef15e73 ("counter: microchip-tcp-capture: Add appropriate arch deps for TCP driver")
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Link: https://lore.kernel.org/r/20230118074659.5909-1-lukas.bulwahn@gmail.com/
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Add the CONFIG_SOC_AT91SAM9 and CONFIG_SOC_SAM_V7 deps for the
Microchip SoCs that support this IP block/driver plus compile
time testing.
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Link: https://lore.kernel.org/r/20230108074750.443705-4-pbrobinson@gmail.com/
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
At the moment only the Freescale LS1021A is the only HW that
supports this IP block so add an appropriate dependency and
compile test.
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Link: https://lore.kernel.org/r/20230108074750.443705-3-pbrobinson@gmail.com/
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Limit the Intel counter driver to X86, it doesn't
make sense to build it for all arches if the counter
subsystem is enabled.
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Link: https://lore.kernel.org/r/20230108074750.443705-2-pbrobinson@gmail.com/
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
The ARR (auto reload register) and CMP (compare) registers are
successively written. The status bits to check the update of these
registers are polled together with regmap_read_poll_timeout().
The condition to end the loop may become true, even if one of the register
isn't correctly updated.
So ensure both status bits are set before clearing them.
Fixes: d8958824cf ("iio: counter: Add support for STM32 LPTimer")
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Link: https://lore.kernel.org/r/20221123133609.465614-1-fabrice.gasnier@foss.st.com/
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
The quad8_action_read() function checks the Count function mode and
Count direction without first acquiring a lock. This is a race condition
because the function mode could change by the time the direction is
checked.
Because the quad8_function_read() already acquires a lock internally,
the quad8_function_read() is refactored to spin out the no-lock code to
a new quad8_function_get() function.
To resolve the race condition in quad8_action_read(), a lock is acquired
before calling quad8_function_get() and quad8_direction_read() in order
to get both function mode and direction atomically.
Fixes: f1d8a071d4 ("counter: 104-quad-8: Add Generic Counter interface support")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20221020141121.15434-1-william.gray@linaro.org/
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
The signal_read(), action_read(), and action_write() callbacks have been
assuming Signal0 is requested without checking. This results in requests
for Signal1 returning data for Signal0. This patch fixes these
oversights by properly checking for the Signal's id in the respective
callbacks and handling accordingly based on the particular Signal
requested. The trig_inverted member of the mchp_tc_data is removed as
superfluous.
Fixes: 106b104137 ("counter: Add microchip TCB capture counter")
Cc: stable@vger.kernel.org
Reviewed-by: Kamel Bouhara <kamel.bouhara@bootlin.com>
Link: https://lore.kernel.org/r/20221018121014.7368-1-william.gray@linaro.org/
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
The devm_counter_alloc() function returns NULL on error. It doesn't
return error pointers.
Fixes: 4e2f42aa00 ("counter: ti-ecap-capture: capture driver support for ECAP")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Julien Panis <jpanis@baylibre.com>
Acked-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/Y0bUbZvfDJHBG9C6@kili/
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
A spare warning was reported for drivers/counter/ti-ecap-capture.c::
sparse warnings: (new ones prefixed by >>)
>> drivers/counter/ti-ecap-capture.c:380:8: sparse: sparse: symbol 'ecap_cnt_pol_array' was not declared. Should it be static?
vim +/ecap_cnt_pol_array +380 drivers/counter/ti-ecap-capture.c
379
> 380 static DEFINE_COUNTER_ARRAY_POLARITY(ecap_cnt_pol_array, ecap_cnt_pol_avail, ECAP_NB_CEVT);
381
The first argument to the DEFINE_COUNTER_ARRAY_POLARITY() macro is a
token serving as the symbol name in the definition of a new
struct counter_array structure. However, this macro actually expands to
two statements::
#define DEFINE_COUNTER_ARRAY_POLARITY(_name, _enums, _length) \
DEFINE_COUNTER_AVAILABLE(_name##_available, _enums); \
struct counter_array _name = { \
.type = COUNTER_COMP_SIGNAL_POLARITY, \
.avail = &(_name##_available), \
.length = (_length), \
}
Because of this, the "static" on line 380 only applies to the first
statement. This patch splits out the DEFINE_COUNTER_AVAILABLE() line
and leaves DEFINE_COUNTER_ARRAY_POLARITY() as a simple structure
definition to avoid issues like this.
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/all/202210020619.NQbyomII-lkp@intel.com/
Cc: Julien Panis <jpanis@baylibre.com>
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
New drivers:
- add a new driver for the IMX System Controller Unit GPIOs
GPIO core:
- add fdinfo output for the GPIO character device file descriptors (allows
user-space to determine which processes own which GPIO lines)
- improvements to OF GPIO code
- new quirk for Asus UM325UAZ in gpiolib-acpi
- new quirk for Freescale SPI in gpiolib-of
Driver improvements:
- add a new macro that reduces the amount of boilerplate code in ISA drivers
and use it in relevant drivers
- support two new models in gpio-pca953x
- support new model in gpio-f7188x
- convert more drivers to use immutable irq chips
- other minor tweaks
Device-tree bindings:
- add DT bindings for gpio-imx-scu
- convert Xilinx GPIO bindings to YAML
- reference the properties from the SPI peripheral device-tree bindings
instead of providing custom ones in the GPIO controller document
- add parsing of GPIO hog nodes to the DT bindings for gpio-mpfs-gpio
- relax the node name requirements in gpio-stmpe
- add new models for gpio-rcar and gpio-pxa95xx
- add a new vendor prefix: Diodes (for Diodes, Inc.)
Misc:
- pulled in the immutable branch from the x86 platform drivers tree including
support for a new simatic board that depends on GPIO changes
-----BEGIN PGP SIGNATURE-----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=Ax6X
-----END PGP SIGNATURE-----
Merge tag 'gpio-updates-for-v6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"We have a single new driver, support for a bunch of new models,
improvements in drivers and core gpiolib code as well device-tree
bindings changes.
Summary:
New driver:
- IMX System Controller Unit GPIOs
GPIO core:
- add fdinfo output for the GPIO character device file descriptors
(allows user-space to determine which processes own which GPIO
lines)
- improvements to OF GPIO code
- new quirk for Asus UM325UAZ in gpiolib-acpi
- new quirk for Freescale SPI in gpiolib-of
Driver improvements:
- add a new macro that reduces the amount of boilerplate code in ISA
drivers and use it in relevant drivers
- support two new models in gpio-pca953x
- support new model in gpio-f7188x
- convert more drivers to use immutable irq chips
- other minor tweaks
Device-tree bindings:
- add DT bindings for gpio-imx-scu
- convert Xilinx GPIO bindings to YAML
- reference the properties from the SPI peripheral device-tree
bindings instead of providing custom ones in the GPIO controller
document
- add parsing of GPIO hog nodes to the DT bindings for gpio-mpfs-gpio
- relax the node name requirements in gpio-stmpe
- add new models for gpio-rcar and gpio-pxa95xx
- add a new vendor prefix: Diodes (for Diodes, Inc.)
Misc:
- pulled in the immutable branch from the x86 platform drivers tree
including support for a new simatic board that depends on GPIO
changes"
* tag 'gpio-updates-for-v6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (36 commits)
gpio: tc3589x: Make irqchip immutable
gpiolib: cdev: add fdinfo output for line request file descriptors
gpio: twl4030: Reorder functions which allows to drop a forward declaraion
gpiolib: fix OOB access in quirk callbacks
gpiolib: of: factor out conversion from OF flags
gpiolib: rework quirk handling in of_find_gpio()
gpiolib: of: make Freescale SPI quirk similar to all others
gpiolib: of: do not ignore requested index when applying quirks
gpio: ws16c48: Ensure number of irq matches number of base
gpio: 104-idio-16: Ensure number of irq matches number of base
gpio: 104-idi-48: Ensure number of irq matches number of base
gpio: 104-dio-48e: Ensure number of irq matches number of base
counter: 104-quad-8: Ensure number of irq matches number of base
isa: Introduce the module_isa_driver_with_irq helper macro
gpio: pca953x: Add support for PCAL6534
gpio: pca953x: Swap if statements to save later complexity
gpio: pca953x: Fix pca953x_gpio_set_pull_up_down()
dt-bindings: gpio: pca95xx: add entry for pcal6534 and PI4IOE5V6534Q
dt-bindings: vendor-prefixes: add Diodes
gpio: mt7621: Switch to use platform_get_irq() function
...
Here is the large set of char/misc and other small driver subsystem
changes for 6.1-rc1. Loads of different things in here:
- IIO driver updates, additions, and changes. Probably the largest
part of the diffstat
- habanalabs driver update with support for new hardware and features,
the second largest part of the diff.
- fpga subsystem driver updates and additions
- mhi subsystem updates
- Coresight driver updates
- gnss subsystem updates
- extcon driver updates
- icc subsystem updates
- fsi subsystem updates
- nvmem subsystem and driver updates
- misc driver updates
- speakup driver additions for new features
- lots of tiny driver updates and cleanups
All of these have been in the linux-next tree for a while with no
reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCY0GQmA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylyVQCeNJjZ3hy+Wz8WkPSY+NkehuIhyCIAnjXMOJP8
5G/JQ+rpcclr7VOXlS66
=zVkU
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc and other driver updates from Greg KH:
"Here is the large set of char/misc and other small driver subsystem
changes for 6.1-rc1. Loads of different things in here:
- IIO driver updates, additions, and changes. Probably the largest
part of the diffstat
- habanalabs driver update with support for new hardware and
features, the second largest part of the diff.
- fpga subsystem driver updates and additions
- mhi subsystem updates
- Coresight driver updates
- gnss subsystem updates
- extcon driver updates
- icc subsystem updates
- fsi subsystem updates
- nvmem subsystem and driver updates
- misc driver updates
- speakup driver additions for new features
- lots of tiny driver updates and cleanups
All of these have been in the linux-next tree for a while with no
reported issues"
* tag 'char-misc-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (411 commits)
w1: Split memcpy() of struct cn_msg flexible array
spmi: pmic-arb: increase SPMI transaction timeout delay
spmi: pmic-arb: block access for invalid PMIC arbiter v5 SPMI writes
spmi: pmic-arb: correct duplicate APID to PPID mapping logic
spmi: pmic-arb: add support to dispatch interrupt based on IRQ status
spmi: pmic-arb: check apid against limits before calling irq handler
spmi: pmic-arb: do not ack and clear peripheral interrupts in cleanup_irq
spmi: pmic-arb: handle spurious interrupt
spmi: pmic-arb: add a print in cleanup_irq
drivers: spmi: Directly use ida_alloc()/free()
MAINTAINERS: add TI ECAP driver info
counter: ti-ecap-capture: capture driver support for ECAP
Documentation: ABI: sysfs-bus-counter: add frequency & num_overflows items
dt-bindings: counter: add ti,am62-ecap-capture.yaml
counter: Introduce the COUNTER_COMP_ARRAY component type
counter: Consolidate Counter extension sysfs attribute creation
counter: Introduce the Count capture component
counter: 104-quad-8: Add Signal polarity component
counter: Introduce the Signal polarity component
counter: interrupt-cnt: Implement watch_validate callback
...
ECAP hardware on TI AM62x SoC supports capture feature. It can be used
to timestamp events (falling/rising edges) detected on input signal.
This commit adds capture driver support for ECAP hardware on AM62x SoC.
In the ECAP hardware, capture pin can also be configured to be in
PWM mode. Current implementation only supports capture operating mode.
Hardware also supports timebase sync between multiple instances, but
this driver supports simple independent capture functionality.
Signed-off-by: Julien Panis <jpanis@baylibre.com>
Link: https://lore.kernel.org/r/20220923142437.271328-4-jpanis@baylibre.com/
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Link: https://lore.kernel.org/r/25644ce1f2fd15d116977770ede20e024f658513.1664318353.git.william.gray@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The COUNTER_COMP_ARRAY Counter component type is introduced to enable
support for Counter array components. With Counter array components,
exposure for buffers on counter devices can be defined via new Counter
array component macros. This should simplify code for driver authors who
would otherwise need to define individual Counter components for each
array element.
Eight Counter array component macros are introduced::
DEFINE_COUNTER_ARRAY_U64(_name, _length)
DEFINE_COUNTER_ARRAY_CAPTURE(_name, _length)
DEFINE_COUNTER_ARRAY_POLARITY(_name, _enums, _length)
COUNTER_COMP_DEVICE_ARRAY_U64(_name, _read, _write, _array)
COUNTER_COMP_COUNT_ARRAY_U64(_name, _read, _write, _array)
COUNTER_COMP_SIGNAL_ARRAY_U64(_name, _read, _write, _array)
COUNTER_COMP_ARRAY_CAPTURE(_read, _write, _array)
COUNTER_COMP_ARRAY_POLARITY(_read, _write, _array)
Eight Counter array callbacks are introduced as well::
int (*signal_array_u32_read)(struct counter_device *counter,
struct counter_signal *signal,
size_t idx, u32 *val);
int (*signal_array_u32_write)(struct counter_device *counter,
struct counter_signal *signal,
size_t idx, u32 val);
int (*device_array_u64_read)(struct counter_device *counter,
size_t idx, u64 *val);
int (*count_array_u64_read)(struct counter_device *counter,
struct counter_count *count,
size_t idx, u64 *val);
int (*signal_array_u64_read)(struct counter_device *counter,
struct counter_signal *signal,
size_t idx, u64 *val);
int (*device_array_u64_write)(struct counter_device *counter,
size_t idx, u64 val);
int (*count_array_u64_write)(struct counter_device *counter,
struct counter_count *count,
size_t idx, u64 val);
int (*signal_array_u64_write)(struct counter_device *counter,
struct counter_signal *signal,
size_t idx, u64 val);
Driver authors can handle reads/writes for an array component by
receiving an element index via the `idx` parameter and processing the
respective value via the `val` parameter.
For example, suppose a driver wants to expose a Count's read-only
capture buffer of four elements using a callback
`foobar_capture_read()`::
DEFINE_COUNTER_ARRAY_CAPTURE(foobar_capture_array, 4);
COUNTER_COMP_ARRAY_CAPTURE(foobar_capture_read, NULL,
foobar_capture_array)
Respective sysfs attributes for each array element would appear for the
respective Count:
* /sys/bus/counter/devices/counterX/countY/capture0
* /sys/bus/counter/devices/counterX/countY/capture1
* /sys/bus/counter/devices/counterX/countY/capture2
* /sys/bus/counter/devices/counterX/countY/capture3
If a user tries to read _capture2_ for example, `idx` will be `2` when
passed to the `foobar_capture_read()` callback, and thus the driver
knows which array element to handle.
Counter arrays for polarity elements can be defined in a similar
manner as u64 elements::
const enum counter_signal_polarity foobar_polarity_states[] = {
COUNTER_SIGNAL_POLARITY_POSITIVE,
COUNTER_SIGNAL_POLARITY_NEGATIVE,
};
DEFINE_COUNTER_ARRAY_POLARITY(foobar_polarity_array,
foobar_polarity_states, 4);
COUNTER_COMP_ARRAY_POLARITY(foobar_polarity_read,
foobar_polarity_write,
foobar_polarity_array)
Tested-by: Julien Panis <jpanis@baylibre.com>
Link: https://lore.kernel.org/r/5310c22520aeae65b1b74952419f49ac4c8e1ec1.1664204990.git.william.gray@linaro.org/
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Link: https://lore.kernel.org/r/a51fd608704bdfc5a0efa503fc5481df34241e0a.1664318353.git.william.gray@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Counter subsystem symbols are only relevant to counter drivers. A
COUNTER namespace is created to control the availability of these
symbols to modules that import this namespace explicitly.
Cc: Patrick Havelange <patrick.havelange@essensium.com>
Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Cc: Oleksij Rempel <linux@rempel-privat.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Kamel Bouhara <kamel.bouhara@bootlin.com>
Cc: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Acked-by: David Lechner <david@lechnology.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20220815220321.74161-1-william.gray@linaro.org/
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Link: https://lore.kernel.org/r/8a756df96c24946547a7ece5caa5f654809c5e7f.1664318353.git.william.gray@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
IRQ trigger configuration is skipped if it has already been set before;
however, the IRQ line still needs to be OR'd to irq_enabled because
irq_enabled is reset for every events_configure call. This patch moves
the irq_enabled OR operation update to before the irq_trigger check so
that IRQ line enablement is not skipped.
Fixes: c95cc0d957 ("counter: 104-quad-8: Fix persistent enabled events bug")
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/20220815122301.2750-1-william.gray@linaro.org/
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Link: https://lore.kernel.org/r/179eed11eaf225dbd908993b510df0c8f67b1230.1663844776.git.william.gray@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The 104-quad-8 module calls devm_request_irq() for each device. If the
number of irq passed to the module does not match the number of base, a
default value of 0 is passed to devm_request_irq(). IRQ 0 is probably
not what the user wants, so utilize the module_isa_driver_with_irq macro
to ensure the number of irq matches the number of base.
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Acked-by: William Breathitt Gray <william.gray@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Here is the big set of char/misc and other small driver subsystem
updates for 5.18-rc1.
Included in here are merges from driver subsystems which contain:
- iio driver updates and new drivers
- fsi driver updates
- fpga driver updates
- habanalabs driver updates and support for new hardware
- soundwire driver updates and new drivers
- phy driver updates and new drivers
- coresight driver updates
- icc driver updates
Individual changes include:
- mei driver updates
- interconnect driver updates
- new PECI driver subsystem added
- vmci driver updates
- lots of tiny misc/char driver updates
There will be two merge conflicts with your tree, one in MAINTAINERS
which is obvious to fix up, and one in drivers/phy/freescale/Kconfig
which also should be easy to resolve.
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYkG3fQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykNEgCfaRG8CRxewDXOO4+GSeA3NGK+AIoAnR89donC
R4bgCjfg8BWIBcVVXg3/
=WWXC
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc and other driver updates from Greg KH:
"Here is the big set of char/misc and other small driver subsystem
updates for 5.18-rc1.
Included in here are merges from driver subsystems which contain:
- iio driver updates and new drivers
- fsi driver updates
- fpga driver updates
- habanalabs driver updates and support for new hardware
- soundwire driver updates and new drivers
- phy driver updates and new drivers
- coresight driver updates
- icc driver updates
Individual changes include:
- mei driver updates
- interconnect driver updates
- new PECI driver subsystem added
- vmci driver updates
- lots of tiny misc/char driver updates
All of these have been in linux-next for a while with no reported
problems"
* tag 'char-misc-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (556 commits)
firmware: google: Properly state IOMEM dependency
kgdbts: fix return value of __setup handler
firmware: sysfb: fix platform-device leak in error path
firmware: stratix10-svc: add missing callback parameter on RSU
arm64: dts: qcom: add non-secure domain property to fastrpc nodes
misc: fastrpc: Add dma handle implementation
misc: fastrpc: Add fdlist implementation
misc: fastrpc: Add helper function to get list and page
misc: fastrpc: Add support to secure memory map
dt-bindings: misc: add fastrpc domain vmid property
misc: fastrpc: check before loading process to the DSP
misc: fastrpc: add secure domain support
dt-bindings: misc: add property to support non-secure DSP
misc: fastrpc: Add support to get DSP capabilities
misc: fastrpc: add support for FASTRPC_IOCTL_MEM_MAP/UNMAP
misc: fastrpc: separate fastrpc device from channel context
dt-bindings: nvmem: brcm,nvram: add basic NVMEM cells
dt-bindings: nvmem: make "reg" property optional
nvmem: brcm_nvram: parse NVRAM content into NVMEM cells
nvmem: dt-bindings: Fix the error of dt-bindings check
...
Clang static analysis reports this representative problem
counter-chrdev.c:482:3: warning: Undefined or garbage value
returned to caller
return ret;
^~~~~~~~~~
counter_get_data() has a multilevel switches, some without
defaults, so ret is sometimes not set.
Add returning -EINVAL similar to other defaults.
Link: https://lore.kernel.org/r/20220227161746.82776-1-trix@redhat.com
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Syed Nayyar Waris <syednwaris@gmail.com>
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Link: https://lore.kernel.org/r/b98d1a3ed4b0b324b261b23defd1bdddddba4d44.1647373009.git.vilhelm.gray@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman