Commit graph

94 commits

Author SHA1 Message Date
Linus Torvalds
7e29629543 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking fixes from David Miller:

 1) Fix namespace init and cleanup in phonet to fix some oopses, from
    Eric W. Biederman.

 2) Missing kfree_skb() in AF_KEY, from Julia Lawall.

 3) Refcount leak and source address handling fix in l2tp from James
    Chapman.

 4) Memory leak fix in CAIF from Tomasz Gregorek.

 5) When routes are cloned from ipv6 addrconf routes, we don't process
    expirations properly.  Fix from Gao Feng.

 6) Fix panic on DMA errors in atl1 driver, from Tony Zelenoff.

 7) Only enable interrupts in 8139cp driver after we've registered the
    IRQ handler.  From Jason Wang.

 8) Fix too many reads of KS_CIDER register in ks8851 during probe,
    fixing crashes on spurious interrupts.  From Matt Renzelmann.

 9) Missing include in ath5k driver and missing iounmap on probe
    failure, from Jonathan Bither.

10) Fix RX packet handling in smsc911x driver, from Will Deacon.

11) Fix ixgbe WoL on fiber by leaving the laser on during shutdown.

12) ks8851 needs MAX_RECV_FRAMES increased otherwise the internal MAC
    buffers are easily overflown.  Fix from Davide Cimingahi.

13) Fix memory leaks in peak_usb CAN driver, from Jesper Juhl.

14) gred packet scheduler can dump in WRED more when doing a netlink
    dump.  Fix from David Ward.

15) Fix MTU in USB smsc75xx driver, from Stephane Fillod.

16) Dummy device needs ->ndo_uninit handler to properly handle
    ->ndo_init failures.  From Hiroaki SHIMODA.

17) Fix TX fragmentation in ath9k driver, from Sujith Manoharan.

18) Missing RTNL lock in ixgbe PM resume, from Benjamin Poirier.

19) Missing iounmap in farsync WAN driver, from Julia Lawall.

20) With LRO/GRO, tcp_grow_window() is easily tricked into not growing
    the receive window properly, and this hurts performance.  Fix from
    Eric Dumazet.

21) Network namespace init failure can leak net_generic data, fix from
    Julian Anastasov.

22) Fix skb_over_panic due to mis-accounting in TCP for partially ACK'd
    SKBs.  From Eric Dumazet.

23) New IDs for qmi_wwan driver, from Bjørn Mork.

24) Fix races in ax25_exit(), from Eric W. Biederman.

25) IPV6 TCP doesn't handle TCP_MAXSEG socket option properly, copy over
    logic from the IPV4 side.  From Neal Cardwell.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (59 commits)
  tcp: fix TCP_MAXSEG for established IPv6 passive sockets
  drivers/net: Do not free an IRQ if its request failed
  drop_monitor: allow more events per second
  ks8851: Fix request_irq/free_irq mismatch
  net/hyperv: Adding cancellation to ensure rndis filter is closed
  ks8851: Fix mutex deadlock in ks8851_net_stop()
  net ax25: Reorder ax25_exit to remove races.
  icplus: fix interrupt for IC+ 101A/G and 1001LF
  net: qmi_wwan: support Sierra Wireless MC77xx devices in QMI mode
  bnx2x: off by one in bnx2x_ets_e3b0_sp_pri_to_cos_set()
  ksz884x: don't copy too much in netdev_set_mac_address()
  tcp: fix retransmit of partially acked frames
  netns: do not leak net_generic data on failed init
  net/sock.h: fix sk_peek_off kernel-doc warning
  tcp: fix tcp_grow_window() for large incoming frames
  drivers/net/wan/farsync.c: add missing iounmap
  davinci_mdio: Fix MDIO timeout check
  ipv6: clean up rt6_clean_expires
  ipv6: fix rt6_update_expires
  arcnet: rimi: Fix device name in debug output
  ...
2012-04-22 21:02:57 -07:00
Michael S. Tsirkin
ca8f4fb21d skbuff: struct ubuf_info callback type safety
The skb struct ubuf_info callback gets passed struct ubuf_info
itself, not the arg value as the field name and the function signature
seem to imply. Rename the arg field to ctx to match usage,
add documentation and change the callback argument type
to make usage clear and to have compiler check correctness.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-13 13:09:19 -04:00
Zhi Yong Wu
5e7045b010 tools/virtio: fix up vhost/test module build
commit ea5d404655
broke build for the vhost test module used
by tools/virtio. Fix it up.

Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2012-04-12 10:35:42 +03:00
David S. Miller
f1e84eb3bb Merge branch 'vhost-net' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost 2012-03-23 14:46:48 -04:00
Cong Wang
c6daa7ffa8 vhost: remove the second argument of k[un]map_atomic()
Signed-off-by: Cong Wang <amwang@redhat.com>
2012-03-20 21:48:21 +08:00
Michael S. Tsirkin
ea5d404655 vhost: fix release path lockdep checks
We shouldn't hold any locks on release path. Pass a flag to
vhost_dev_cleanup to use the lockdep info correctly.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Sasha Levin <levinsasha928@gmail.com>
2012-02-28 09:13:22 +02:00
Nadav Har'El
d550dda192 vhost: don't forget to schedule()
This is a tiny, but important, patch to vhost.

Vhost's worker thread only called schedule() when it had no work to do, and
it wanted to go to sleep. But if there's always work to do, e.g., the guest
is running a network-intensive program like netperf with small message sizes,
schedule() was *never* called. This had several negative implications (on
non-preemptive kernels):

 1. Passing time was not properly accounted to the "vhost" process (ps and
    top would wrongly show it using zero CPU time).

 2. Sometimes error messages about RCU timeouts would be printed, if the
    core running the vhost thread didn't schedule() for a very long time.

 3. Worst of all, a vhost thread would "hog" the core. If several vhost
    threads need to share the same core, typically one would get most of the
    CPU time (and its associated guest most of the performance), while the
    others hardly get any work done.

The trivial solution is to add

	if (need_resched())
		schedule();

After doing every piece of work. This will not do the heavy schedule() all
the time, just when the timer interrupt decided a reschedule is warranted
(so need_resched returns true).

Thanks to Abel Gordon for this patch.

Signed-off-by: Nadav Har'El <nyh@il.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2012-02-28 09:13:19 +02:00
stephen hemminger
7c7c7f01cc vhost-net: add module alias (v2.1)
By adding some module aliases, programs (or users) won't have to explicitly
call modprobe. Vhost-net will always be available if built into the kernel.
It does require assigning a permanent minor number for depmod to work.

Also:
  - use C99 style initialization.
  - add missing entry in documentation for loop-control

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Acked-By: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-13 10:12:23 -08:00
Arun Sharma
60063497a9 atomic: use <linux/atomic.h>
This allows us to move duplicated code in <asm/atomic.h>
(atomic_inc_not_zero() for now) to <linux/atomic.h>

Signed-off-by: Arun Sharma <asharma@fb.com>
Reviewed-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: David Miller <davem@davemloft.net>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-26 16:49:47 -07:00
Shirley Ma
9e380825ab vhost: handle wrap around in # of bufs math
The meth for calculating the # of outstanding buffers gives
incorrect results when vq->upend_idx wraps around zero.
Fix that.

Signed-off-by: Shirley Ma <xma@us.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-07-21 10:48:27 +03:00
Michael S. Tsirkin
c047e5f317 vhost-net: update used ring on backend change
On backend change, we flushed out outstanding skbs
but forgot to update the used ring, so that
done entries were left in the ubuf_info ring.
As a result we lose heads or complete incorrect ones,
crashing the guest or leaking memory.
Fix by updating the used ring.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-07-21 10:23:31 +03:00
Michael S. Tsirkin
b834226b04 vhost: optimize interrupt enable/disable
As we now only update used ring after enabling
the backend, we can write flags with __put_user:
as that's done on data path, it matters.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-07-19 17:17:28 +03:00
Michael S. Tsirkin
75fd9edc10 vhost: fix zcopy reference counting
Fix get/put refcount imbalance with zero copy,
which caused qemu to hang forever on guest driver unload.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-07-19 13:28:34 +03:00
Jason Wang
2723feaa8e vhost: set log when updating used flags or avail event
We need to log writes when updating used flags and avail event
fields.  Otherwise the guest may see a stale value after migration and
miss notifying the host.

Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-07-19 13:28:34 +03:00
Jason Wang
f59281dafb vhost: init used ring after backend was set
Move the used ring initialization after backend was set. This
makes it possible to disable the backend and tweak the used ring,
then restart. This will also make it possible to log the used ring
write correctly.

Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-07-19 13:28:34 +03:00
Michael S. Tsirkin
bab632d69e vhost: vhost TX zero-copy support
>From: Shirley Ma <mashirle@us.ibm.com>

This adds experimental zero copy support in vhost-net,
disabled by default. To enable, set
experimental_zcopytx module option to 1.

This patch maintains the outstanding userspace buffers in the
sequence it is delivered to vhost. The outstanding userspace buffers
will be marked as done once the lower device buffers DMA has finished.
This is monitored through last reference of kfree_skb callback. Two
buffer indices are used for this purpose.

The vhost-net device passes the userspace buffers info to lower device
skb through message control. DMA done status check and guest
notification are handled by handle_tx: in the worst case is all buffers
in the vq are in pending/done status, so we need to notify guest to
release DMA done buffers first before we get any new buffers from the
vq.

One known problem is that if the guest stops submitting
buffers, buffers might never get used until some
further action, e.g. device reset. This does not
seem to affect linux guests.

Signed-off-by: Shirley <xma@us.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-18 10:42:32 -07:00
Michael S. Tsirkin
8ea8cf89e1 vhost: support event index
Support the new event index feature. When acked,
utilize it to reduce the # of interrupts sent to the guest.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2011-05-30 11:14:15 +09:30
Rob Landley
6151658751 Correct occurrences of
- Documentation/kvm/ to Documentation/virtual/kvm
- Documentation/uml/ to Documentation/virtual/uml
- Documentation/lguest/ to Documentation/virtual/lguest
throughout the kernel source tree.

Signed-off-by: Rob Landley <rob@landley.net>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
2011-05-06 09:27:55 -07:00
Michael S. Tsirkin
de4d768a42 vhost-net: remove unlocked use of receive_queue
Use of skb_queue_empty(&sock->sk->sk_receive_queue)
without taking the sk_receive_queue.lock is unsafe
or useless. Take it out.

Reported-by:  Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-03-13 23:08:19 +02:00
Jason Wang
783e398854 vhost: lock receive queue, not the socket
vhost takes a sock lock to try and prevent
the skb from being pulled from the receive queue
after skb_peek.  However this is not the right lock to use for that,
sk_receive_queue.lock is. Fix that up.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-03-13 23:08:04 +02:00
Jason Wang
94249369e9 vhost-net: Unify the code of mergeable and big buffer handling
Codes duplication were found between the handling of mergeable and big
buffers, so this patch tries to unify them. This could be easily done
by adding a quota to the get_rx_bufs() which is used to limit the
number of buffers it returns (for mergeable buffer, the quota is
simply UIO_MAXIOV, for big buffers, the quota is just 1), and then the
previous handle_rx_mergeable() could be resued also for big buffers.

Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-03-13 17:00:10 +02:00
Jason Wang
cfbdab9513 vhost-net: check the support of mergeable buffer outside the receive loop
No need to check the support of mergeable buffer inside the recevie
loop as the whole handle_rx()_xx is in the read critical region.  So
this patch move it ahead of the receiving loop.

Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-03-13 16:57:30 +02:00
Michael S. Tsirkin
fcc042a280 vhost: copy_from_user -> __copy_from_user
copy_from_user is pretty high on perf top profile,
replacing it with __copy_from_user helps.
It's also safe because we do access_ok checks during setup.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-03-08 18:03:05 +02:00
Krishna Kumar
d47effe1be vhost: Cleanup vhost.c and net.c
Minor cleanup of vhost.c and net.c to match coding style.

Signed-off-by: Krishna Kumar <krkumar2@in.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-03-08 18:02:47 +02:00
Michael S. Tsirkin
5e18247b02 vhost: rcu annotation fixup
When built with rcu checks enabled, vhost triggers
bogus warnings as vhost features are read without
dev->mutex sometimes, and private pointer is read
with our kind of rcu where work serves as a
read side critical section.

Fixing it properly is not trivial.
Disable the warnings by stubbing out the checks for now.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-02-01 16:48:46 +02:00
Michael S. Tsirkin
0174b0c30a vhost: fix signed/unsigned comparison
To detect that a sequence number is done, we are doing math on unsigned
integers so the result is unsigned too. Not what was intended for the <=
comparison. The result is user stuck forever in flush call.
Convert to int to fix this.

Further, get rid of ({}) to make code clearer.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-01-10 10:03:39 +02:00
David S. Miller
9fe146aef4 Merge branch 'vhost-net-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost 2010-12-14 11:33:23 -08:00
Michael S. Tsirkin
71ccc212e5 vhost test module
This adds a test module for vhost infrastructure.
Intentionally not tied to kbuild to prevent people
from installing and loading it accidentally.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-12-09 16:00:21 +02:00
Michael S. Tsirkin
28831ee60b vhost: better variable name in logging
We really store a page offset in write_address,
so rename it write_page to avoid confusion.

Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-12-09 16:00:10 +02:00
Michael S. Tsirkin
3bf9be40ff vhost: correctly set bits of dirty pages
Fix two bugs in dirty page logging:
When counting pages we should increase address by 1 instead of
VHOST_PAGE_SIZE. Make log_write() correctly process requests
that cross pages with write_address not starting at page boundary.

Reported-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-12-09 15:39:17 +02:00
Jason Wang
a290aec88a vhost: fix typos in comment
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-12-09 15:39:15 +02:00
Michael S. Tsirkin
bf5e0bd27f vhost: remove unused include
vhost.c does not need to know about sockets,
don't include sock.h

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-12-09 15:39:13 +02:00
Michael S. Tsirkin
11cd1a8b8c vhost/net: fix rcu check usage
Incorrect rcu check was used as rcu isn't done
under mutex here. Force check to 1 for now,
to stop it from complaining.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-11-25 11:29:16 +02:00
Michael S. Tsirkin
8b7347aab6 vhost: get/put_user -> __get/__put_user
We do access_ok checks on all ring values on an ioctl,
so we don't need to redo them on each access.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-11-04 13:22:12 +02:00
Michael S. Tsirkin
dfe5ac5b18 vhost: copy_to_user -> __copy_to_user
We do access_ok checks at setup time, so we don't need to
redo them on each access.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-11-04 13:22:11 +02:00
Michael S. Tsirkin
64e1c80748 vhost-net: batch use/unuse mm
Move use/unuse mm to vhost.c which makes it possible to batch these
operations.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-11-04 13:22:11 +02:00
Michael S. Tsirkin
533a19b4b8 vhost: put mm after thread stop
makes it possible to batch use/unuse mm

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-11-04 13:22:10 +02:00
Julia Lawall
3fcedec752 drivers/vhost/vhost.c: delete double assignment
Delete successive assignments to the same location.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@@
expression i;
@@

*i = ...;
 i = ...;
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-10-26 20:39:30 +02:00
Linus Torvalds
5f05647dd8 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1699 commits)
  bnx2/bnx2x: Unsupported Ethtool operations should return -EINVAL.
  vlan: Calling vlan_hwaccel_do_receive() is always valid.
  tproxy: use the interface primary IP address as a default value for --on-ip
  tproxy: added IPv6 support to the socket match
  cxgb3: function namespace cleanup
  tproxy: added IPv6 support to the TPROXY target
  tproxy: added IPv6 socket lookup function to nf_tproxy_core
  be2net: Changes to use only priority codes allowed by f/w
  tproxy: allow non-local binds of IPv6 sockets if IP_TRANSPARENT is enabled
  tproxy: added tproxy sockopt interface in the IPV6 layer
  tproxy: added udp6_lib_lookup function
  tproxy: added const specifiers to udp lookup functions
  tproxy: split off ipv6 defragmentation to a separate module
  l2tp: small cleanup
  nf_nat: restrict ICMP translation for embedded header
  can: mcp251x: fix generation of error frames
  can: mcp251x: fix endless loop in interrupt handler if CANINTF_MERRF is set
  can-raw: add msg_flags to distinguish local traffic
  9p: client code cleanup
  rds: make local functions/variables static
  ...

Fix up conflicts in net/core/dev.c, drivers/net/pcmcia/smc91c92_cs.c and
drivers/net/wireless/ath/ath9k/debug.c as per David
2010-10-23 11:47:02 -07:00
Linus Torvalds
092e0e7e52 Merge branch 'llseek' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl
* 'llseek' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl:
  vfs: make no_llseek the default
  vfs: don't use BKL in default_llseek
  llseek: automatically add .llseek fop
  libfs: use generic_file_llseek for simple_attr
  mac80211: disallow seeks in minstrel debug code
  lirc: make chardev nonseekable
  viotape: use noop_llseek
  raw: use explicit llseek file operations
  ibmasmfs: use generic_file_llseek
  spufs: use llseek in all file operations
  arm/omap: use generic_file_llseek in iommu_debug
  lkdtm: use generic_file_llseek in debugfs
  net/wireless: use generic_file_llseek in debugfs
  drm: use noop_llseek
2010-10-22 10:52:56 -07:00
David S. Miller
2198a10b50 Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:
	net/core/dev.c
2010-10-21 08:43:05 -07:00
Arnd Bergmann
6038f373a3 llseek: automatically add .llseek fop
All file_operations should get a .llseek operation so we can make
nonseekable_open the default for future file operations without a
.llseek pointer.

The three cases that we can automatically detect are no_llseek, seq_lseek
and default_llseek. For cases where we can we can automatically prove that
the file offset is always ignored, we use noop_llseek, which maintains
the current behavior of not returning an error from a seek.

New drivers should normally not use noop_llseek but instead use no_llseek
and call nonseekable_open at open time.  Existing drivers can be converted
to do the same when the maintainer knows for certain that no user code
relies on calling seek on the device file.

The generated code is often incorrectly indented and right now contains
comments that clarify for each added line why a specific variant was
chosen. In the version that gets submitted upstream, the comments will
be gone and I will manually fix the indentation, because there does not
seem to be a way to do that using coccinelle.

Some amount of new code is currently sitting in linux-next that should get
the same modifications, which I will do at the end of the merge window.

Many thanks to Julia Lawall for helping me learn to write a semantic
patch that does all this.

===== begin semantic patch =====
// This adds an llseek= method to all file operations,
// as a preparation for making no_llseek the default.
//
// The rules are
// - use no_llseek explicitly if we do nonseekable_open
// - use seq_lseek for sequential files
// - use default_llseek if we know we access f_pos
// - use noop_llseek if we know we don't access f_pos,
//   but we still want to allow users to call lseek
//
@ open1 exists @
identifier nested_open;
@@
nested_open(...)
{
<+...
nonseekable_open(...)
...+>
}

@ open exists@
identifier open_f;
identifier i, f;
identifier open1.nested_open;
@@
int open_f(struct inode *i, struct file *f)
{
<+...
(
nonseekable_open(...)
|
nested_open(...)
)
...+>
}

@ read disable optional_qualifier exists @
identifier read_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
expression E;
identifier func;
@@
ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off)
{
<+...
(
   *off = E
|
   *off += E
|
   func(..., off, ...)
|
   E = *off
)
...+>
}

@ read_no_fpos disable optional_qualifier exists @
identifier read_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
@@
ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off)
{
... when != off
}

@ write @
identifier write_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
expression E;
identifier func;
@@
ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off)
{
<+...
(
  *off = E
|
  *off += E
|
  func(..., off, ...)
|
  E = *off
)
...+>
}

@ write_no_fpos @
identifier write_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
@@
ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off)
{
... when != off
}

@ fops0 @
identifier fops;
@@
struct file_operations fops = {
 ...
};

@ has_llseek depends on fops0 @
identifier fops0.fops;
identifier llseek_f;
@@
struct file_operations fops = {
...
 .llseek = llseek_f,
...
};

@ has_read depends on fops0 @
identifier fops0.fops;
identifier read_f;
@@
struct file_operations fops = {
...
 .read = read_f,
...
};

@ has_write depends on fops0 @
identifier fops0.fops;
identifier write_f;
@@
struct file_operations fops = {
...
 .write = write_f,
...
};

@ has_open depends on fops0 @
identifier fops0.fops;
identifier open_f;
@@
struct file_operations fops = {
...
 .open = open_f,
...
};

// use no_llseek if we call nonseekable_open
////////////////////////////////////////////
@ nonseekable1 depends on !has_llseek && has_open @
identifier fops0.fops;
identifier nso ~= "nonseekable_open";
@@
struct file_operations fops = {
...  .open = nso, ...
+.llseek = no_llseek, /* nonseekable */
};

@ nonseekable2 depends on !has_llseek @
identifier fops0.fops;
identifier open.open_f;
@@
struct file_operations fops = {
...  .open = open_f, ...
+.llseek = no_llseek, /* open uses nonseekable */
};

// use seq_lseek for sequential files
/////////////////////////////////////
@ seq depends on !has_llseek @
identifier fops0.fops;
identifier sr ~= "seq_read";
@@
struct file_operations fops = {
...  .read = sr, ...
+.llseek = seq_lseek, /* we have seq_read */
};

// use default_llseek if there is a readdir
///////////////////////////////////////////
@ fops1 depends on !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier readdir_e;
@@
// any other fop is used that changes pos
struct file_operations fops = {
... .readdir = readdir_e, ...
+.llseek = default_llseek, /* readdir is present */
};

// use default_llseek if at least one of read/write touches f_pos
/////////////////////////////////////////////////////////////////
@ fops2 depends on !fops1 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier read.read_f;
@@
// read fops use offset
struct file_operations fops = {
... .read = read_f, ...
+.llseek = default_llseek, /* read accesses f_pos */
};

@ fops3 depends on !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier write.write_f;
@@
// write fops use offset
struct file_operations fops = {
... .write = write_f, ...
+	.llseek = default_llseek, /* write accesses f_pos */
};

// Use noop_llseek if neither read nor write accesses f_pos
///////////////////////////////////////////////////////////

@ fops4 depends on !fops1 && !fops2 && !fops3 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier read_no_fpos.read_f;
identifier write_no_fpos.write_f;
@@
// write fops use offset
struct file_operations fops = {
...
 .write = write_f,
 .read = read_f,
...
+.llseek = noop_llseek, /* read and write both use no f_pos */
};

@ depends on has_write && !has_read && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier write_no_fpos.write_f;
@@
struct file_operations fops = {
... .write = write_f, ...
+.llseek = noop_llseek, /* write uses no f_pos */
};

@ depends on has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier read_no_fpos.read_f;
@@
struct file_operations fops = {
... .read = read_f, ...
+.llseek = noop_llseek, /* read uses no f_pos */
};

@ depends on !has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
@@
struct file_operations fops = {
...
+.llseek = noop_llseek, /* no read or write fn */
};
===== End semantic patch =====

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Julia Lawall <julia@diku.dk>
Cc: Christoph Hellwig <hch@infradead.org>
2010-10-15 15:53:27 +02:00
Dan Carpenter
6d97e55f71 vhost: fix return code for log_access_ok()
access_ok() returns 1 if it's OK otherwise it should return 0.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-10-12 14:32:28 +02:00
Ingo Molnar
556ef63255 Merge commit 'v2.6.36-rc7' into core/rcu
Merge reason: Update from -rc3 to -rc7.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-10-07 09:43:45 +02:00
Ingo Molnar
d4f8f217b8 Merge branch 'rcu/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-2.6-rcu into core/rcu 2010-10-07 09:43:11 +02:00
Jason Wang
e0e9b40647 vhost: max s/g to match qemu
Qemu supports up to UIO_MAXIOV s/g so we have to match that because guest
drivers may rely on this.

Allocate indirect and log arrays dynamically to avoid using too much contigious
memory and make the length of hdr array to match the header length since each
iovec entry has a least one byte.

Test with copying large files w/ and w/o migration in both linux and windows
guests.

Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-10-05 13:33:43 +02:00
Michael S. Tsirkin
5786aee8bf vhost: fix log ctx signalling
The log eventfd signalling got put in dead code.
We didn't notice because qemu currently does polling
instead of eventfd select.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-09-22 16:21:33 +02:00
Michael S. Tsirkin
ee05d6939e vhost-net: fix range checking in mrg bufs case
In mergeable buffer case, we use headcount, log_num
and seg as indexes in same-size arrays, and
we know that headcount <= seg and
log_num equals either 0 or seg.

Therefore, the right thing to do is range-check seg,
not headcount as we do now: these will be different
if guest chains s/g descriptors (this does not
happen now, but we can not trust the guest).

Long term, we should add BUG_ON checks to verify
two other indexes are what we think they should be.

Reported-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-09-14 15:22:41 +02:00
Michael S. Tsirkin
615cc2211c vhost: error handling fix
vhost should set worker to NULL on cgroups attach failure,
so that we won't try to destroy the worker again on close.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-09-06 09:49:39 +03:00
Michael S. Tsirkin
87d6a412bd vhost: fix attach to cgroups regression
Since 2.6.36-rc1, non-root users of vhost-net fail to attach
if they are in any cgroups.

The reason is that when qemu uses vhost, vhost wants to attach
its thread to all cgroups that qemu has.  But we got the API backwards,
so a non-priveledged process (Qemu) tried to control
the priveledged one (vhost), which fails.

Fix this by switching to the new cgroup_attach_task_all,
and running it from the vhost thread.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-09-06 09:49:31 +03:00