Calculate the halt-polling "stop" time using "start" instead of redoing
ktime_get(). In practice, the numbers involved are in the noise (e.g.,
in the happy case where hardware correctly predicts do_halt_poll and
there are no interrupts, "start" is probably only a few cycles old)
and either approach is perfectly ok. But it's more precise to count
any extra latency toward the halt-polling time.
Reviewed-by: David Matlack <dmatlack@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211009021236.4122790-17-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a "blocking" stat that userspace can use to detect the case where a
vCPU is not being run because of an vCPU/guest action, e.g. HLT or WFS on
x86, WFI on arm64, etc... Current guest/host/halt stats don't show this
well, e.g. if a guest halts for a long period of time then the vCPU could
could appear pathologically blocked due to a host condition, when in
reality the vCPU has been put into a not-runnable state by the guest.
Originally-by: Cannon Matthews <cannonmatthews@google.com>
Suggested-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: David Matlack <dmatlack@google.com>
Signed-off-by: Jing Zhang <jingzhangos@google.com>
[sean: renamed stat to "blocking", massaged changelog]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211009021236.4122790-16-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Factor out the "block" part of kvm_vcpu_halt() so that x86 can emulate
non-halt wait/sleep/block conditions that should not be subjected to
halt-polling.
No functional change intended.
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: David Matlack <dmatlack@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211009021236.4122790-15-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rename kvm_vcpu_block() to kvm_vcpu_halt() in preparation for splitting
the actual "block" sequences into a separate helper (to be named
kvm_vcpu_block()). x86 will use the standalone block-only path to handle
non-halt cases where the vCPU is not runnable.
Rename block_ns to halt_ns to match the new function name.
No functional change intended.
Reviewed-by: David Matlack <dmatlack@google.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211009021236.4122790-14-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop kvm_arch_vcpu_block_finish() now that all arch implementations are
nops.
No functional change intended.
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: David Matlack <dmatlack@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211009021236.4122790-10-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Invoke the arch hooks for block+unblock if and only if KVM actually
attempts to block the vCPU. The only non-nop implementation is on x86,
specifically SVM's AVIC, and there is no need to put the AVIC prior to
halt-polling; KVM x86's kvm_vcpu_has_events() will scour the full vIRR
to find pending IRQs regardless of whether the AVIC is loaded/"running".
The primary motivation is to allow future cleanup to split out "block"
from "halt", but this is also likely a small performance boost on x86 SVM
when halt-polling is successful.
Adjust the post-block path to update "cur" after unblocking, i.e. include
AVIC load time in halt_wait_ns and halt_wait_hist, so that the behavior
is consistent. Moving just the pre-block arch hook would result in only
the AVIC put latency being included in the halt_wait stats. There is no
obvious evidence that one way or the other is correct, so just ensure KVM
is consistent.
Note, x86 has two separate paths for handling APICv with respect to vCPU
blocking. VMX uses hooks in x86's vcpu_block(), while SVM uses the arch
hooks in kvm_vcpu_block(). Prior to this path, the two paths were more
or less functionally identical. That is very much not the case after
this patch, as the hooks used by VMX _must_ fire before halt-polling.
x86's entire mess will be cleaned up in future patches.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211009021236.4122790-12-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the halt-polling "success" and histogram stats update into the
dedicated helper to fix a discrepancy where the success/fail "time" stats
consider polling successful so long as the wait is avoided, but the main
"success" and histogram stats consider polling successful if and only if
a wake event was detected by the halt-polling loop.
Move halt_attempted_poll to the helper as well so that all the stats are
updated in a single location. While it's a bit odd to update the stat
well after the fact, practically speaking there's no meaningful advantage
to updating before polling.
Note, there is a functional change in addition to the success vs. fail
change. The histogram updates previously called ktime_get() instead of
using "cur". But that change is desirable as it means all the stats are
now updated with the same polling time, and avoids the extra ktime_get(),
which isn't expensive but isn't free either.
Reviewed-by: David Matlack <dmatlack@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211009021236.4122790-8-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a comment to document that halt-polling is considered successful even
if the polling loop itself didn't detect a wake event, i.e. if a wake
event was detect in the final kvm_vcpu_check_block(). Invert the param
to update helper so that the helper is a dumb function that is "told"
whether or not polling was successful, as opposed to determining success
based on blocking behavior.
Opportunistically tweak the params to the update helper to reduce the
line length for the call site so that it fits on a single line, and so
that the prototype conforms to the more traditional kernel style.
No functional change intended.
Reviewed-by: David Matlack <dmatlack@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211009021236.4122790-7-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Don't update halt-polling stats if halt-polling wasn't attempted. This is
a nop as @poll_ns is guaranteed to be '0' (poll_end == start); in a future
patch (to move the histogram stats into the helper), it will avoid to
avoid a discrepancy in what is considered a "successful" halt-poll.
No functional change intended.
Reviewed-by: David Matlack <dmatlack@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211009021236.4122790-6-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Do not define/reference kvm_vcpu.wait if __KVM_HAVE_ARCH_WQP is true, and
instead force the architecture (PPC) to define its own rcuwait object.
Allowing common KVM to directly access vcpu->wait without a guard makes
it all too easy to introduce potential bugs, e.g. kvm_vcpu_block(),
kvm_vcpu_on_spin(), and async_pf_execute() all operate on vcpu->wait, not
the result of kvm_arch_vcpu_get_wait(), and so may do the wrong thing for
PPC.
Due to PPC's shenanigans with respect to callbacks and waits (it switches
to the virtual core's wait object at KVM_RUN!?!?), it's not clear whether
or not this fixes any bugs.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211009021236.4122790-5-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Wrap s390's halt_poll_max_steal with READ_ONCE and snapshot the result of
kvm_arch_no_poll() in kvm_vcpu_block() to avoid a mostly-theoretical,
largely benign bug on s390 where the result of kvm_arch_no_poll() could
change due to userspace modifying halt_poll_max_steal while the vCPU is
blocking. The bug is largely benign as it will either cause KVM to skip
updating halt-polling times (no_poll toggles false=>true) or to update
halt-polling times with a slightly flawed block_ns.
Note, READ_ONCE is unnecessary in the current code, add it in case the
arch hook is ever inlined, and to provide a hint that userspace can
change the param at will.
Fixes: 8b905d28ee ("KVM: s390: provide kvm_arch_no_poll function")
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211009021236.4122790-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If we do have the vcpu mutex, as is the case if kvm_running_vcpu is set
to the target vcpu of the kick, changes to vcpu->mode do not need atomic
operations; cmpxchg is only needed _outside_ the mutex to ensure that
the IN_GUEST_MODE->EXITING_GUEST_MODE change does not race with the vcpu
thread going OUTSIDE_GUEST_MODE.
Use this to optimize the case of a vCPU sending an interrupt to itself.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In preparation for implementing in-place hugepage promotion, various
functions will need to be called from zap_collapsible_spte_range, which
has the const qualifier on its memslot argument. Propagate the const
qualifier to the various functions which will be needed. This just serves
to simplify the following patch.
No functional change intended.
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20211115234603.2908381-11-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Allocate the "new" memslot for !DELETE memslot updates straight away
instead of filling an intermediate on-stack object and forcing
kvm_set_memslot() to juggle the allocation and do weird things like reuse
the old memslot object in MOVE.
In the MOVE case, this results in an "extra" memslot allocation due to
allocating both the "new" slot and the "invalid" slot, but that's a
temporary and not-huge allocation, and MOVE is a relatively rare memslot
operation.
Regarding MOVE, drop the open-coded management of the gfn tree with a
call to kvm_replace_memslot(), which already handles the case where
new->base_gfn != old->base_gfn. This is made possible by virtue of not
having to copy the "new" memslot data after erasing the old memslot from
the gfn tree. Using kvm_replace_memslot(), and more specifically not
reusing the old memslot, means the MOVE case now does hva tree and hash
list updates, but that's a small price to pay for simplifying the code
and making MOVE align with all the other flavors of updates. The "extra"
updates are firmly in the noise from a performance perspective, e.g. the
"move (in)active area" selfttests show a (very, very) slight improvement.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Message-Id: <f0d8c72727aa825cf682bd4e3da4b3fa68215dd4.1638817641.git.maciej.szmigiero@oracle.com>
Initialize the "new" memslot in the !DELETE path only after the various
sanity checks have passed. This will allow a future commit to allocate
@new dynamically without having to copy a memslot, and without having to
deal with freeing @new in error paths and in the "nothing to change" path
that's hiding in the sanity checks.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Message-Id: <a084d0531ca3a826a7f861eb2b08b5d1c06ef265.1638817641.git.maciej.szmigiero@oracle.com>
Do a quick lookup for possibly overlapping gfns when creating or moving
a memslot instead of performing a linear scan of the whole memslot set.
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
[sean: tweaked params to avoid churn in future cleanup]
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <a4795e5c2f624754e9c0aab023ebda1966feb3e1.1638817641.git.maciej.szmigiero@oracle.com>
kvm_invalidate_memslot() calls kvm_arch_flush_shadow_memslot() on the
active, but KVM_MEMSLOT_INVALID slot.
Do it on the inactive (but valid) old slot instead since arch code really
should not get passed such invalid slot.
Note that this means that the "arch" field of the slot provided to
kvm_arch_flush_shadow_memslot() may have stale data since this function
is called with slots_arch_lock released.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <813595ecc193d6ae39a87709899d4251523b05f8.1638817641.git.maciej.szmigiero@oracle.com>
The current memslot code uses a (reverse gfn-ordered) memslot array for
keeping track of them.
Because the memslot array that is currently in use cannot be modified
every memslot management operation (create, delete, move, change flags)
has to make a copy of the whole array so it has a scratch copy to work on.
Strictly speaking, however, it is only necessary to make copy of the
memslot that is being modified, copying all the memslots currently present
is just a limitation of the array-based memslot implementation.
Two memslot sets, however, are still needed so the VM continues to run
on the currently active set while the requested operation is being
performed on the second, currently inactive one.
In order to have two memslot sets, but only one copy of actual memslots
it is necessary to split out the memslot data from the memslot sets.
The memslots themselves should be also kept independent of each other
so they can be individually added or deleted.
These two memslot sets should normally point to the same set of
memslots. They can, however, be desynchronized when performing a
memslot management operation by replacing the memslot to be modified
by its copy. After the operation is complete, both memslot sets once
again point to the same, common set of memslot data.
This commit implements the aforementioned idea.
For tracking of gfns an ordinary rbtree is used since memslots cannot
overlap in the guest address space and so this data structure is
sufficient for ensuring that lookups are done quickly.
The "last used slot" mini-caches (both per-slot set one and per-vCPU one),
that keep track of the last found-by-gfn memslot, are still present in the
new code.
Co-developed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Message-Id: <17c0cf3663b760a0d3753d4ac08c0753e941b811.1638817641.git.maciej.szmigiero@oracle.com>
The current memslots implementation only allows quick binary search by gfn,
quick lookup by hva is not possible - the implementation has to do a linear
scan of the whole memslots array, even though the operation being performed
might apply just to a single memslot.
This significantly hurts performance of per-hva operations with higher
memslot counts.
Since hva ranges can overlap between memslots an interval tree is needed
for tracking them.
[sean: handle interval tree updates in kvm_replace_memslot()]
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Message-Id: <d66b9974becaa9839be9c4e1a5de97b177b4ac20.1638817640.git.maciej.szmigiero@oracle.com>
Memslot ID to the corresponding memslot mappings are currently kept as
indices in static id_to_index array.
The size of this array depends on the maximum allowed memslot count
(regardless of the number of memslots actually in use).
This has become especially problematic recently, when memslot count cap was
removed, so the maximum count is now full 32k memslots - the maximum
allowed by the current KVM API.
Keeping these IDs in a hash table (instead of an array) avoids this
problem.
Resolving a memslot ID to the actual memslot (instead of its index) will
also enable transitioning away from an array-based implementation of the
whole memslots structure in a later commit.
Co-developed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Message-Id: <117fb2c04320e6cd6cf34f205a72eadb0aa8d5f9.1638817640.git.maciej.szmigiero@oracle.com>
Since kvm_memslot_move_forward() can theoretically return a negative
memslot index even when kvm_memslot_move_backward() returned a positive one
(and so did not WARN) let's just move the warning to the common code.
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <eeed890ccb951e7b0dce15bc170eb2661d5b02da.1638817640.git.maciej.szmigiero@oracle.com>
s390 arch has gfn_to_memslot_approx() which is almost identical to
search_memslots(), differing only in that in case the gfn falls in a hole
one of the memslots bordering the hole is returned.
Add this lookup mode as an option to search_memslots() so we don't have two
almost identical functions for looking up a memslot by its gfn.
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
[sean: tweaked helper names to keep gfn_to_memslot_approx() in s390]
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <171cd89b52c718dbe180ecd909b4437a64a7e2ec.1638817640.git.maciej.szmigiero@oracle.com>
Stop making a full copy of the old memslot in __kvm_set_memory_region()
now that metadata updates are handled by kvm_set_memslot(), i.e. now that
the old memslot's dirty bitmap doesn't need to be referenced after the
memslot and its pointer is modified/invalidated by kvm_set_memslot().
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Message-Id: <5dce0946b41bba8c83f6e3424c6955c56bcc9f86.1638817640.git.maciej.szmigiero@oracle.com>
Handle the generic memslot metadata, a.k.a. dirty bitmap, updates at the
same time that arch handles it's own metadata updates, i.e. at memslot
prepare and commit. This will simplify converting @new to a dynamically
allocated object, and more closely aligns common KVM with architecture
code.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Message-Id: <2ddd5446e3706fe3c1e52e3df279f04c458be830.1638817640.git.maciej.szmigiero@oracle.com>
Drop the @mem param from kvm_arch_{prepare,commit}_memory_region() now
that its use has been removed in all architectures.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Message-Id: <aa5ed3e62c27e881d0d8bc0acbc1572bc336dc19.1638817640.git.maciej.szmigiero@oracle.com>
Pass the "old" slot to kvm_arch_prepare_memory_region() and force arch
code to handle propagating arch specific data from "new" to "old" when
necessary. This is a baby step towards dynamically allocating "new" from
the get go, and is a (very) minor performance boost on x86 due to not
unnecessarily copying arch data.
For PPC HV, copy the rmap in the !CREATE and !DELETE paths, i.e. for MOVE
and FLAGS_ONLY. This is functionally a nop as the previous behavior
would overwrite the pointer for CREATE, and eventually discard/ignore it
for DELETE.
For x86, copy the arch data only for FLAGS_ONLY changes. Unlike PPC HV,
x86 needs to reallocate arch data in the MOVE case as the size of x86's
allocations depend on the alignment of the memslot's gfn.
Opportunistically tweak kvm_arch_prepare_memory_region()'s param order to
match the "commit" prototype.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
[mss: add missing RISCV kvm_arch_prepare_memory_region() change]
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Message-Id: <67dea5f11bbcfd71e3da5986f11e87f5dd4013f9.1638817639.git.maciej.szmigiero@oracle.com>
Now that the address space ID is stored in every slot, including fake
slots used for deletion, use the slot's as_id instead of passing in the
redundant information as a param to kvm_set_memslot(). This will greatly
simplify future memslot work by avoiding passing a large number of
variables around purely to honor @as_id.
Drop a comment in the DELETE path about new->as_id being provided purely
for debug, as that's now a lie.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Message-Id: <03189577be214ab8530a4b3a3ee3ed1c2f9e5815.1638817639.git.maciej.szmigiero@oracle.com>
There is no need to copy the whole memslot data after releasing
slots_arch_lock for a moment to install temporary memslots copy in
kvm_set_memslot() since this lock only protects the arch field of each
memslot.
Just resync this particular field after reacquiring slots_arch_lock.
Note, this also eliminates the need to manually clear the INVALID flag
when restoring memslots; the "setting" of the INVALID flag was an
unwanted side effect of copying the entire memslots.
Since kvm_copy_memslots() has just one caller remaining now
open-code it instead.
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
[sean: tweak shortlog, note INVALID flag in changelog, revert comment]
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <b63035d114707792e9042f074478337f770dff6a.1638817638.git.maciej.szmigiero@oracle.com>
Fold kvm_delete_memslot() into __kvm_set_memory_region() to free up the
"kvm_delete_memslot()" name for use in a future helper. The delete logic
isn't so complex/long that it truly needs a helper, and it will be
simplified a wee bit further in upcoming commits.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Message-Id: <2887631c31a82947faa488ab72f55f8c68b7c194.1638817638.git.maciej.szmigiero@oracle.com>
Explicitly disallow creating more memslot pages than can fit in an
unsigned long, KVM doesn't correctly handle a total number of memslot
pages that doesn't fit in an unsigned long and remedying that would be a
waste of time.
For a 64-bit kernel, this is a nop as memslots are not allowed to overlap
in the gfn address space.
With a 32-bit kernel, userspace can at most address 3gb of virtual memory,
whereas wrapping the total number of pages would require 4tb+ of guest
physical memory. Even with x86's second address space for SMM, userspace
would need to alias all of guest memory more than one _thousand_ times.
And on older x86 hardware with MAXPHYADDR < 43, the guest couldn't
actually access any of those aliases even if userspace lied about
guest.MAXPHYADDR.
On 390 and arm64, this is a nop as they don't support 32-bit hosts.
On x86, practically speaking this is simply acknowledging reality as the
existing kvm_mmu_calculate_default_mmu_pages() assumes the total number
of pages fits in an "unsigned long".
On PPC, this is likely a nop as every flavor of PPC KVM assumes gfns (and
gpas!) fit in unsigned long. arch/powerpc/kvm/book3s_32_mmu_host.c goes
a step further and fails the build if CONFIG_PTE_64BIT=y, which
presumably means that it does't support 64-bit physical addresses.
On MIPS, this is also likely a nop as the core MMU helpers assume gpas
fit in unsigned long, e.g. see kvm_mips_##name##_pte.
And finally, RISC-V is a "don't care" as it doesn't exist in any release,
i.e. there is no established ABI to break.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Message-Id: <1c2c91baf8e78acccd4dad38da591002e61c013c.1638817638.git.maciej.szmigiero@oracle.com>
Everywhere we use kvm_for_each_vpcu(), we use an int as the vcpu
index. Unfortunately, we're about to move rework the iterator,
which requires this to be upgrade to an unsigned long.
Let's bite the bullet and repaint all of it in one go.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Message-Id: <20211116160403.4074052-7-maz@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
At least on arm64 and x86, the vcpus array is pretty huge (up to
1024 entries on x86) and is mostly empty in the majority of the cases
(running 1k vcpu VMs is not that common).
This mean that we end-up with a 4kB block of unused memory in the
middle of the kvm structure.
Instead of wasting away this memory, let's use an xarray instead,
which gives us almost the same flexibility as a normal array, but
with a reduced memory usage with smaller VMs.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Message-Id: <20211116160403.4074052-6-maz@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
All architectures have similar loops iterating over the vcpus,
freeing one vcpu at a time, and eventually wiping the reference
off the vcpus array. They are also inconsistently taking
the kvm->lock mutex when wiping the references from the array.
Make this code common, which will simplify further changes.
The locking is dropped altogether, as this should only be called
when there is no further references on the kvm structure.
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Message-Id: <20211116160403.4074052-2-maz@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is not an unrecoverable situation. Users of kvm_read_guest_offset_cached
and kvm_write_guest_offset_cached must expect the read/write to fail, and
therefore it is possible to just return early with an error value.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reject userspace memslots whose size exceeds the storage capacity of an
"unsigned long". KVM's uAPI takes the size as u64 to support large slots
on 64-bit hosts, but does not account for the size being truncated on
32-bit hosts in various flows. The access_ok() check on the userspace
virtual address in particular casts the size to "unsigned long" and will
check the wrong number of bytes.
KVM doesn't actually support slots whose size doesn't fit in an "unsigned
long", e.g. KVM's internal kvm_memory_slot.npages is an "unsigned long",
not a "u64", and misc arch specific code follows that behavior.
Fixes: fa3d315a4c ("KVM: Validate userspace_addr of memslot when registered")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Message-Id: <20211104002531.1176691-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When modifying memslots, snapshot the "old" memslot and copy it to the
"new" memslot's arch data after (re)acquiring slots_arch_lock. x86 can
change a memslot's arch data while memslot updates are in-progress so
long as it holds slots_arch_lock, thus snapshotting a memslot without
holding the lock can result in the consumption of stale data.
Fixes: b10a038e84 ("KVM: mmu: Add slots_arch_lock for memslot arch fields")
Cc: stable@vger.kernel.org
Cc: Ben Gardon <bgardon@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211104002531.1176691-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* Fixes for Xen emulation
* Kill kvm_map_gfn() / kvm_unmap_gfn() and broken gfn_to_pfn_cache
* Fixes for migration of 32-bit nested guests on 64-bit hypervisor
* Compilation fixes
* More SEV cleanups
In commit 7e2175ebd6 ("KVM: x86: Fix recording of guest steal time /
preempted status") I removed the only user of these functions because
it was basically impossible to use them safely.
There are two stages to the GFN->PFN mapping; first through the KVM
memslots to a userspace HVA and then through the page tables to
translate that HVA to an underlying PFN. Invalidations of the former
were being handled correctly, but no attempt was made to use the MMU
notifiers to invalidate the cache when the HVA->GFN mapping changed.
As a prelude to reinventing the gfn_to_pfn_cache with more usable
semantics, rip it out entirely and untangle the implementation of
the unsafe kvm_vcpu_map()/kvm_vcpu_unmap() functions from it.
All current users of kvm_vcpu_map() also look broken right now, and
will be dealt with separately. They broadly fall into two classes:
* Those which map, access the data and immediately unmap. This is
mostly gratuitous and could just as well use the existing user
HVA, and could probably benefit from a gfn_to_hva_cache as they
do so.
* Those which keep the mapping around for a longer time, perhaps
even using the PFN directly from the guest. These will need to
be converted to the new gfn_to_pfn_cache and then kvm_vcpu_map()
can be removed too.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <20211115165030.7422-8-dwmw2@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move x86's perf guest callbacks into common KVM, as they are semantically
identical to arm64's callbacks (the only other such KVM callbacks).
arm64 will convert to the common versions in a future patch.
Implement the necessary arm64 arch hooks now to avoid having to provide
stubs or a temporary #define (from x86) to avoid arm64 compilation errors
when CONFIG_GUEST_PERF_EVENTS=y.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211111020738.2512932-13-seanjc@google.com
Generalize KVM_REQ_VM_BUGGED so that it can be called even in cases
where it is by design that the VM cannot be operated upon. In this
case any KVM_BUG_ON should still warn, so introduce a new flag
kvm->vm_dead that is separate from kvm->vm_bugged.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
All of the irqfds would to be updated when update the irq
routing, it's too expensive if there're too many irqfds.
However we can reduce the cost by avoid some unnecessary
updates. For irqs of MSI type on X86, the update can be
saved if the msi values are not change.
The vfio migration could receives benefit from this optimi-
zaiton. The test VM has 128 vcpus and 8 VF (with 65 vectors
enabled), so the VM has more than 520 irqfds. We mesure the
cost of the vfio_msix_enable (in QEMU, it would set routing
for each irqfd) for each VF, and we can see the total cost
can be significantly reduced.
Origin Apply this Patch
1st 8 4
2nd 15 5
3rd 22 6
4th 24 6
5th 36 7
6th 44 7
7th 51 8
8th 58 8
Total 258ms 51ms
We're also tring to optimize the QEMU part [1], but it's still
worth to optimize the KVM to gain more benefits.
[1] https://lists.gnu.org/archive/html/qemu-devel/2021-08/msg04215.html
Signed-off-by: Longpeng(Mike) <longpeng2@huawei.com>
Message-Id: <20210827080003.2689-1-longpeng2@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM_MAX_VCPU_ID is not specifying the highest allowed vcpu-id, but the
number of allowed vcpu-ids. This has already led to confusion, so
rename KVM_MAX_VCPU_ID to KVM_MAX_VCPU_IDS to make its semantics more
clear
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210913135745.13944-3-jgross@suse.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
kvm_make_vcpus_request_mask() already disables preemption so just like
kvm_make_all_cpus_request_except() it can be switched to using
pre-allocated per-cpu cpumasks. This allows for improvements for both
users of the function: in Hyper-V emulation code 'tlb_flush' can now be
dropped from 'struct kvm_vcpu_hv' and kvm_make_scan_ioapic_request_mask()
gets rid of dynamic allocation.
cpumask_available() checks in kvm_make_vcpu_request() and
kvm_kick_many_cpus() can now be dropped as they checks for an impossible
condition: kvm_init() makes sure per-cpu masks are allocated.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210903075141.403071-9-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Allocating cpumask dynamically in zalloc_cpumask_var() is not ideal.
Allocation is somewhat slow and can (in theory and when CPUMASK_OFFSTACK)
fail. kvm_make_all_cpus_request_except() already disables preemption so
we can use pre-allocated per-cpu cpumasks instead.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210903075141.403071-8-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Iterating over set bits in 'vcpu_bitmap' should be faster than going
through all vCPUs, especially when just a few bits are set.
Drop kvm_make_vcpus_request_mask() call from kvm_make_all_cpus_request_except()
to avoid handling the special case when 'vcpu_bitmap' is NULL, move the
code to kvm_make_all_cpus_request_except() itself.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210903075141.403071-5-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use vma_pages function on vma object instead of explicit computation.
Fix the following coccicheck warning:
./virt/kvm/kvm_main.c:3526:29-35: WARNING: Consider using vma_pages
helper on vma
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Message-Id: <1632900526-119643-1-git-send-email-yang.lee@linux.alibaba.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There is no user of tlbs_dirty.
Signed-off-by: Lai Jiangshan <laijs@linux.alibaba.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210918005636.3675-4-jiangshanlai@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Check for a NULL cpumask_var_t when kicking multiple vCPUs via
cpumask_available(), which performs a !NULL check if and only if cpumasks
are configured to be allocated off-stack. This is a meaningless
optimization, e.g. avoids a TEST+Jcc and TEST+CMOV on x86, but more
importantly helps document that the NULL check is necessary even though
all callers pass in a local variable.
No functional change intended.
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210827092516.1027264-3-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fix a benign data race reported by syzbot+KCSAN[*] by ensuring vcpu->cpu
is read exactly once, and by ensuring the vCPU is booted from guest mode
if kvm_arch_vcpu_should_kick() returns true. Fix a similar race in
kvm_make_vcpus_request_mask() by ensuring the vCPU is interrupted if
kvm_request_needs_ipi() returns true.
Reading vcpu->cpu before vcpu->mode (via kvm_arch_vcpu_should_kick() or
kvm_request_needs_ipi()) means the target vCPU could get migrated (change
vcpu->cpu) and enter !OUTSIDE_GUEST_MODE between reading vcpu->cpud and
reading vcpu->mode. If that happens, the kick/IPI will be sent to the
old pCPU, not the new pCPU that is now running the vCPU or reading SPTEs.
Although failing to kick the vCPU is not exactly ideal, practically
speaking it cannot cause a functional issue unless there is also a bug in
the caller, and any such bug would exist regardless of kvm_vcpu_kick()'s
behavior.
The purpose of sending an IPI is purely to get a vCPU into the host (or
out of reading SPTEs) so that the vCPU can recognize a change in state,
e.g. a KVM_REQ_* request. If vCPU's handling of the state change is
required for correctness, KVM must ensure either the vCPU sees the change
before entering the guest, or that the sender sees the vCPU as running in
guest mode. All architectures handle this by (a) sending the request
before calling kvm_vcpu_kick() and (b) checking for requests _after_
setting vcpu->mode.
x86's READING_SHADOW_PAGE_TABLES has similar requirements; KVM needs to
ensure it kicks and waits for vCPUs that started reading SPTEs _before_
MMU changes were finalized, but any vCPU that starts reading after MMU
changes were finalized will see the new state and can continue on
uninterrupted.
For uses of kvm_vcpu_kick() that are not paired with a KVM_REQ_*, e.g.
x86's kvm_arch_sync_dirty_log(), the order of the kick must not be relied
upon for functional correctness, e.g. in the dirty log case, userspace
cannot assume it has a 100% complete log if vCPUs are still running.
All that said, eliminate the benign race since the cost of doing so is an
"extra" atomic cmpxchg() in the case where the target vCPU is loaded by
the current pCPU or is not loaded at all. I.e. the kick will be skipped
due to kvm_vcpu_exiting_guest_mode() seeing a compatible vcpu->mode as
opposed to the kick being skipped because of the cpu checks.
Keep the "cpu != me" checks even though they appear useless/impossible at
first glance. x86 processes guest IPI writes in a fast path that runs in
IN_GUEST_MODE, i.e. can call kvm_vcpu_kick() from IN_GUEST_MODE. And
calling kvm_vm_bugged()->kvm_make_vcpus_request_mask() from IN_GUEST or
READING_SHADOW_PAGE_TABLES is perfectly reasonable.
Note, a race with the cpu_online() check in kvm_vcpu_kick() likely
persists, e.g. the vCPU could exit guest mode and get offlined between
the cpu_online() check and the sending of smp_send_reschedule(). But,
the online check appears to exist only to avoid a WARN in x86's
native_smp_send_reschedule() that fires if the target CPU is not online.
The reschedule WARN exists because CPU offlining takes the CPU out of the
scheduling pool, i.e. the WARN is intended to detect the case where the
kernel attempts to schedule a task on an offline CPU. The actual sending
of the IPI is a non-issue as at worst it will simpy be dropped on the
floor. In other words, KVM's usurping of the reschedule IPI could
theoretically trigger a WARN if the stars align, but there will be no
loss of functionality.
[*] https://syzkaller.appspot.com/bug?extid=cd4154e502f43f10808a
Cc: Venkatesh Srinivas <venkateshs@google.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Fixes: 97222cc831 ("KVM: Emulate local APIC in kernel")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210827092516.1027264-2-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
grow_halt_poll_ns() ignores values between 0 and
halt_poll_ns_grow_start (10000 by default). However,
when we shrink halt_poll_ns we may fall way below
halt_poll_ns_grow_start and endup with halt_poll_ns
values that don't make a lot of sense: like 1 or 9,
or 19.
VCPU1 trace (halt_poll_ns_shrink equals 2):
VCPU1 grow 10000
VCPU1 shrink 5000
VCPU1 shrink 2500
VCPU1 shrink 1250
VCPU1 shrink 625
VCPU1 shrink 312
VCPU1 shrink 156
VCPU1 shrink 78
VCPU1 shrink 39
VCPU1 shrink 19
VCPU1 shrink 9
VCPU1 shrink 4
Mirror what grow_halt_poll_ns() does and set halt_poll_ns
to 0 as soon as new shrink-ed halt_poll_ns value falls
below halt_poll_ns_grow_start.
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210902031100.252080-1-senozhatsky@chromium.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop the unused function as reported by test bot.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20210901230904.15164-1-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Page ownership tracking between host EL1 and EL2
- Rely on userspace page tables to create large stage-2 mappings
- Fix incompatibility between pKVM and kmemleak
- Fix the PMU reset state, and improve the performance of the virtual PMU
- Move over to the generic KVM entry code
- Address PSCI reset issues w.r.t. save/restore
- Preliminary rework for the upcoming pKVM fixed feature
- A bunch of MM cleanups
- a vGIC fix for timer spurious interrupts
- Various cleanups
-----BEGIN PGP SIGNATURE-----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=LuHM
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for 5.15
- Page ownership tracking between host EL1 and EL2
- Rely on userspace page tables to create large stage-2 mappings
- Fix incompatibility between pKVM and kmemleak
- Fix the PMU reset state, and improve the performance of the virtual PMU
- Move over to the generic KVM entry code
- Address PSCI reset issues w.r.t. save/restore
- Preliminary rework for the upcoming pKVM fixed feature
- A bunch of MM cleanups
- a vGIC fix for timer spurious interrupts
- Various cleanups
Add a new stat that counts the number of times a remote TLB flush is
requested, regardless of whether it kicks vCPUs out of guest mode. This
allows us to look at how often flushes are initiated.
Unlike remote_tlb_flush, this one applies to ARM's instruction-set-based
TLB flush implementation, so apply it there too.
Original-by: David Matlack <dmatlack@google.com>
Signed-off-by: Jing Zhang <jingzhangos@google.com>
Message-Id: <20210817002639.3856694-1-jingzhangos@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Don't export KVM's MMU notifier count helpers, under no circumstance
should any downstream module, including x86's vendor code, have a
legitimate reason to piggyback KVM's MMU notifier logic. E.g in the x86
case, only KVM's MMU should be elevating the notifier count, and that
code is always built into the core kvm.ko module.
Fixes: edb298c663 ("KVM: x86/mmu: bump mmu notifier count in kvm_zap_gfn_range")
Cc: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210902175951.1387989-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add three log histogram stats to record the distribution of time spent
on successful polling, failed polling and VCPU wait.
halt_poll_success_hist: Distribution of spent time for a successful poll.
halt_poll_fail_hist: Distribution of spent time for a failed poll.
halt_wait_hist: Distribution of time a VCPU has spent on waiting.
Signed-off-by: Jing Zhang <jingzhangos@google.com>
Message-Id: <20210802165633.1866976-6-jingzhangos@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add simple stats halt_wait_ns to record the time a VCPU has spent on
waiting for all architectures (not just powerpc).
Signed-off-by: Jing Zhang <jingzhangos@google.com>
Message-Id: <20210802165633.1866976-5-jingzhangos@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This together with previous patch, ensures that
kvm_zap_gfn_range doesn't race with page fault
running on another vcpu, and will make this page fault code
retry instead.
This is based on a patch suggested by Sean Christopherson:
https://lkml.org/lkml/2021/7/22/1025
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210810205251.424103-5-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Allow archs to create arch-specific nodes under kvm->debugfs_dentry directory
besides the stats fields. The new interface kvm_arch_create_vm_debugfs() is
defined but not yet used. It's called after kvm->debugfs_dentry is created, so
it can be referenced directly in kvm_arch_create_vm_debugfs(). Arch should
define their own versions when they want to create extra debugfs nodes.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20210730220455.26054-2-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
These stores are copied and pasted from the "if" statements above.
They are dead and while they are not really a bug, they can be
confusing to anyone reading the code as well. Remove them.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The memslot for a given gfn is looked up multiple times during page
fault handling. Avoid binary searching for it multiple times by caching
the most recently used slot. There is an existing VM-wide last_used_slot
but that does not work well for cases where vCPUs are accessing memory
in different slots (see performance data below).
Another benefit of caching the most recently use slot (versus looking
up the slot once and passing around a pointer) is speeding up memslot
lookups *across* faults and during spte prefetching.
To measure the performance of this change I ran dirty_log_perf_test with
64 vCPUs and 64 memslots and measured "Populate memory time" and
"Iteration 2 dirty memory time". Tests were ran with eptad=N to force
dirty logging to use fast_page_fault so its performance could be
measured.
Config | Metric | Before | After
---------- | ----------------------------- | ------ | ------
tdp_mmu=Y | Populate memory time | 6.76s | 5.47s
tdp_mmu=Y | Iteration 2 dirty memory time | 2.83s | 0.31s
tdp_mmu=N | Populate memory time | 20.4s | 18.7s
tdp_mmu=N | Iteration 2 dirty memory time | 2.65s | 0.30s
The "Iteration 2 dirty memory time" results are especially compelling
because they are equivalent to running the same test with a single
memslot. In other words, fast_page_fault performance no longer scales
with the number of memslots.
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20210804222844.1419481-4-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
lru_slot is used to keep track of the index of the most-recently used
memslot. The correct acronym would be "mru" but that is not a common
acronym. So call it last_used_slot which is a bit more obvious.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20210804222844.1419481-2-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM creates a debugfs directory for each VM in order to store statistics
about the virtual machine. The directory name is built from the process
pid and a VM fd. While generally unique, it is possible to keep a
file descriptor alive in a way that causes duplicate directories, which
manifests as these messages:
[ 471.846235] debugfs: Directory '20245-4' with parent 'kvm' already present!
Even though this should not happen in practice, it is more or less
expected in the case of KVM for testcases that call KVM_CREATE_VM and
close the resulting file descriptor repeatedly and in parallel.
When this happens, debugfs_create_dir() returns an error but
kvm_create_vm_debugfs() goes on to allocate stat data structs which are
later leaked. The slow memory leak was spotted by syzkaller, where it
caused OOM reports.
Since the issue only affects debugfs, do a lookup before calling
debugfs_create_dir, so that the message is downgraded and rate-limited.
While at it, ensure kvm->debugfs_dentry is NULL rather than an error
if it is not created. This fixes kvm_destroy_vm_debugfs, which was not
checking IS_ERR_OR_NULL correctly.
Cc: stable@vger.kernel.org
Fixes: 536a6f88c4 ("KVM: Create debugfs dir and stat files for each VM")
Reported-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Avoid taking mmu_lock for .invalidate_range_{start,end}() notifications
that are unrelated to KVM. This is possible now that memslot updates are
blocked from range_start() to range_end(); that ensures that lock elision
happens in both or none, and therefore that mmu_notifier_count updates
(which must occur while holding mmu_lock for write) are always paired
across start->end.
Based on patches originally written by Ben Gardon.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We would like to avoid taking mmu_lock for .invalidate_range_{start,end}()
notifications that are unrelated to KVM. Because mmu_notifier_count
must be modified while holding mmu_lock for write, and must always
be paired across start->end to stay balanced, lock elision must
happen in both or none. Therefore, in preparation for this change,
this patch prevents memslot updates across range_start() and range_end().
Note, technically flag-only memslot updates could be allowed in parallel,
but stalling a memslot update for a relatively short amount of time is
not a scalability issue, and this is all more than complex enough.
A long note on the locking: a previous version of the patch used an rwsem
to block the memslot update while the MMU notifier run, but this resulted
in the following deadlock involving the pseudo-lock tagged as
"mmu_notifier_invalidate_range_start".
======================================================
WARNING: possible circular locking dependency detected
5.12.0-rc3+ #6 Tainted: G OE
------------------------------------------------------
qemu-system-x86/3069 is trying to acquire lock:
ffffffff9c775ca0 (mmu_notifier_invalidate_range_start){+.+.}-{0:0}, at: __mmu_notifier_invalidate_range_end+0x5/0x190
but task is already holding lock:
ffffaff7410a9160 (&kvm->mmu_notifier_slots_lock){.+.+}-{3:3}, at: kvm_mmu_notifier_invalidate_range_start+0x36d/0x4f0 [kvm]
which lock already depends on the new lock.
This corresponds to the following MMU notifier logic:
invalidate_range_start
take pseudo lock
down_read() (*)
release pseudo lock
invalidate_range_end
take pseudo lock (**)
up_read()
release pseudo lock
At point (*) we take the mmu_notifiers_slots_lock inside the pseudo lock;
at point (**) we take the pseudo lock inside the mmu_notifiers_slots_lock.
This could cause a deadlock (ignoring for a second that the pseudo lock
is not a lock):
- invalidate_range_start waits on down_read(), because the rwsem is
held by install_new_memslots
- install_new_memslots waits on down_write(), because the rwsem is
held till (another) invalidate_range_end finishes
- invalidate_range_end sits waits on the pseudo lock, held by
invalidate_range_start.
Removing the fairness of the rwsem breaks the cycle (in lockdep terms,
it would change the *shared* rwsem readers into *shared recursive*
readers), so open-code the wait using a readers count and a
spinlock. This also allows handling blockable and non-blockable
critical section in the same way.
Losing the rwsem fairness does theoretically allow MMU notifiers to
block install_new_memslots forever. Note that mm/mmu_notifier.c's own
retry scheme in mmu_interval_read_begin also uses wait/wake_up
and is likewise not fair.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Introduce this safe version of kvm_get_kvm() so that it can be called even
during vm destruction. Use it in kvm_debugfs_open() and remove the verbose
comment. Prepare to be used elsewhere.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20210625153214.43106-3-peterx@redhat.com>
[Preserve the comment in kvm_debugfs_open. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that arm64 has stopped using kvm_is_transparent_hugepage(),
we can remove it, as well as PageTransCompoundMap() which was
only used by the former.
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210726153552.1535838-5-maz@kernel.org
The arguments to the KVM_CLEAR_DIRTY_LOG ioctl include a pointer,
therefore it needs a compat ioctl implementation. Otherwise,
32-bit userspace fails to invoke it on 64-bit kernels; for x86
it might work fine by chance if the padding is zero, but not
on big-endian architectures.
Reported-by: Thomas Sattler
Cc: stable@vger.kernel.org
Fixes: 2a31b9db15 ("kvm: introduce manual dirty log reprotect")
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
SMT siblings share caches and other hardware, and busy halt polling
will degrade its sibling performance if its sibling is working
Sean Christopherson suggested as below:
"Rather than disallowing halt-polling entirely, on x86 it should be
sufficient to simply have the hardware thread yield to its sibling(s)
via PAUSE. It probably won't get back all performance, but I would
expect it to be close.
This compiles on all KVM architectures, and AFAICT the intended usage
of cpu_relax() is identical for all architectures."
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Message-Id: <20210727111247.55510-1-lirongqing@baidu.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* Fixes for host SMIs on AMD
* Fixes for guest SMIs on AMD
* Fixes for selftests on s390 and ARM
* Fix memory leak
* Enforce no-instrumentation area on vmentry when hardware
breakpoints are in use.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmDwRi4UHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroOt4AgAl6xEkMwDC74d/QFIOA7s2GD3ugfa
z5XqGN1qz/nmEMnuIg6/tjTXDPmn/dfLMqy8RGZfyUv6xbgPcv/7JuFMRILvwGTb
SbOVrGnR/QOhMdlfWH34qDkXeEsthTXSgQgVm/iiED0TttvQYVcZ/E9mgzaWQXor
T1yTug2uAUXJ1EBxY0ZBo2kbh+BvvdmhEF0pksZOuwqZdH3zn3QCXwAwkL/OtUYE
M6nNn3j1LU38C4OK1niXOZZVOuMIdk/l7LyFpjUQTFlIqitQAPtBE5MD+K+A9oC2
Yocxyj2tId1e6o8bLic/oN8/LpdORTvA/wDMj5M1DcMzvxQuQIpGYkcVGg==
=gjVA
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
- Allow again loading KVM on 32-bit non-PAE builds
- Fixes for host SMIs on AMD
- Fixes for guest SMIs on AMD
- Fixes for selftests on s390 and ARM
- Fix memory leak
- Enforce no-instrumentation area on vmentry when hardware breakpoints
are in use.
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (25 commits)
KVM: selftests: smm_test: Test SMM enter from L2
KVM: nSVM: Restore nested control upon leaving SMM
KVM: nSVM: Fix L1 state corruption upon return from SMM
KVM: nSVM: Introduce svm_copy_vmrun_state()
KVM: nSVM: Check that VM_HSAVE_PA MSR was set before VMRUN
KVM: nSVM: Check the value written to MSR_VM_HSAVE_PA
KVM: SVM: Fix sev_pin_memory() error checks in SEV migration utilities
KVM: SVM: Return -EFAULT if copy_to_user() for SEV mig packet header fails
KVM: SVM: add module param to control the #SMI interception
KVM: SVM: remove INIT intercept handler
KVM: SVM: #SMI interception must not skip the instruction
KVM: VMX: Remove vmx_msr_index from vmx.h
KVM: X86: Disable hardware breakpoints unconditionally before kvm_x86->run()
KVM: selftests: Address extra memslot parameters in vm_vaddr_alloc
kvm: debugfs: fix memory leak in kvm_create_vm_debugfs
KVM: x86/pmu: Clear anythread deprecated bit when 0xa leaf is unsupported on the SVM
KVM: mmio: Fix use-after-free Read in kvm_vm_ioctl_unregister_coalesced_mmio
KVM: SVM: Revert clearing of C-bit on GPA in #NPF handler
KVM: x86/mmu: Do not apply HPA (memory encryption) mask to GPAs
KVM: x86: Use kernel's x86_phys_bits to handle reduced MAXPHYADDR
...
In commit bc9e9e672d ("KVM: debugfs: Reuse binary stats descriptors")
loop for filling debugfs_stat_data was copy-pasted 2 times, but
in the second loop pointers are saved over pointers allocated
in the first loop. All this causes is a memory leak, fix it.
Fixes: bc9e9e672d ("KVM: debugfs: Reuse binary stats descriptors")
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Reviewed-by: Jing Zhang <jingzhangos@google.com>
Message-Id: <20210701195500.27097-1-paskripkin@gmail.com>
Reviewed-by: Jing Zhang <jingzhangos@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Merge misc updates from Andrew Morton:
"191 patches.
Subsystems affected by this patch series: kthread, ia64, scripts,
ntfs, squashfs, ocfs2, kernel/watchdog, and mm (gup, pagealloc, slab,
slub, kmemleak, dax, debug, pagecache, gup, swap, memcg, pagemap,
mprotect, bootmem, dma, tracing, vmalloc, kasan, initialization,
pagealloc, and memory-failure)"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (191 commits)
mm,hwpoison: make get_hwpoison_page() call get_any_page()
mm,hwpoison: send SIGBUS with error virutal address
mm/page_alloc: split pcp->high across all online CPUs for cpuless nodes
mm/page_alloc: allow high-order pages to be stored on the per-cpu lists
mm: replace CONFIG_FLAT_NODE_MEM_MAP with CONFIG_FLATMEM
mm: replace CONFIG_NEED_MULTIPLE_NODES with CONFIG_NUMA
docs: remove description of DISCONTIGMEM
arch, mm: remove stale mentions of DISCONIGMEM
mm: remove CONFIG_DISCONTIGMEM
m68k: remove support for DISCONTIGMEM
arc: remove support for DISCONTIGMEM
arc: update comment about HIGHMEM implementation
alpha: remove DISCONTIGMEM and NUMA
mm/page_alloc: move free_the_page
mm/page_alloc: fix counting of managed_pages
mm/page_alloc: improve memmap_pages dbg msg
mm: drop SECTION_SHIFT in code comments
mm/page_alloc: introduce vm.percpu_pagelist_high_fraction
mm/page_alloc: limit the number of pages on PCP lists when reclaim is active
mm/page_alloc: scale the number of pages that are batch freed
...
vma_lookup() finds the vma of a specific address with a cleaner interface
and is more readable.
Link: https://lkml.kernel.org/r/20210521174745.2219620-11-Liam.Howlett@Oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Reviewed-by: Laurent Dufour <ldufour@linux.ibm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Davidlohr Bueso <dbueso@suse.de>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Add MTE support in guests, complete with tag save/restore interface
- Reduce the impact of CMOs by moving them in the page-table code
- Allow device block mappings at stage-2
- Reduce the footprint of the vmemmap in protected mode
- Support the vGIC on dumb systems such as the Apple M1
- Add selftest infrastructure to support multiple configuration
and apply that to PMU/non-PMU setups
- Add selftests for the debug architecture
- The usual crop of PMU fixes
PPC:
- Support for the H_RPT_INVALIDATE hypercall
- Conversion of Book3S entry/exit to C
- Bug fixes
S390:
- new HW facilities for guests
- make inline assembly more robust with KASAN and co
x86:
- Allow userspace to handle emulation errors (unknown instructions)
- Lazy allocation of the rmap (host physical -> guest physical address)
- Support for virtualizing TSC scaling on VMX machines
- Optimizations to avoid shattering huge pages at the beginning of live migration
- Support for initializing the PDPTRs without loading them from memory
- Many TLB flushing cleanups
- Refuse to load if two-stage paging is available but NX is not (this has
been a requirement in practice for over a year)
- A large series that separates the MMU mode (WP/SMAP/SMEP etc.) from
CR0/CR4/EFER, using the MMU mode everywhere once it is computed
from the CPU registers
- Use PM notifier to notify the guest about host suspend or hibernate
- Support for passing arguments to Hyper-V hypercalls using XMM registers
- Support for Hyper-V TLB flush hypercalls and enlightened MSR bitmap on
AMD processors
- Hide Hyper-V hypercalls that are not included in the guest CPUID
- Fixes for live migration of virtual machines that use the Hyper-V
"enlightened VMCS" optimization of nested virtualization
- Bugfixes (not many)
Generic:
- Support for retrieving statistics without debugfs
- Cleanups for the KVM selftests API
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmDV9UYUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroOIRgf/XX8fKLh24RnTOs2ldIu2AfRGVrT4
QMrr8MxhmtukBAszk2xKvBt8/6gkUjdaIC3xqEnVjxaDaUvZaEtP7CQlF5JV45rn
iv1zyxUKucXrnIOr+gCioIT7qBlh207zV35ArKioP9Y83cWx9uAs22pfr6g+7RxO
h8bJZlJbSG6IGr3voANCIb9UyjU1V/l8iEHqRwhmr/A5rARPfD7g8lfMEQeGkzX6
+/UydX2fumB3tl8e2iMQj6vLVdSOsCkehvpHK+Z33EpkKhan7GwZ2sZ05WmXV/nY
QLAYfD10KegoNWl5Ay4GTp4hEAIYVrRJCLC+wnLdc0U8udbfCuTC31LK4w==
=NcRh
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"This covers all architectures (except MIPS) so I don't expect any
other feature pull requests this merge window.
ARM:
- Add MTE support in guests, complete with tag save/restore interface
- Reduce the impact of CMOs by moving them in the page-table code
- Allow device block mappings at stage-2
- Reduce the footprint of the vmemmap in protected mode
- Support the vGIC on dumb systems such as the Apple M1
- Add selftest infrastructure to support multiple configuration and
apply that to PMU/non-PMU setups
- Add selftests for the debug architecture
- The usual crop of PMU fixes
PPC:
- Support for the H_RPT_INVALIDATE hypercall
- Conversion of Book3S entry/exit to C
- Bug fixes
S390:
- new HW facilities for guests
- make inline assembly more robust with KASAN and co
x86:
- Allow userspace to handle emulation errors (unknown instructions)
- Lazy allocation of the rmap (host physical -> guest physical
address)
- Support for virtualizing TSC scaling on VMX machines
- Optimizations to avoid shattering huge pages at the beginning of
live migration
- Support for initializing the PDPTRs without loading them from
memory
- Many TLB flushing cleanups
- Refuse to load if two-stage paging is available but NX is not (this
has been a requirement in practice for over a year)
- A large series that separates the MMU mode (WP/SMAP/SMEP etc.) from
CR0/CR4/EFER, using the MMU mode everywhere once it is computed
from the CPU registers
- Use PM notifier to notify the guest about host suspend or hibernate
- Support for passing arguments to Hyper-V hypercalls using XMM
registers
- Support for Hyper-V TLB flush hypercalls and enlightened MSR bitmap
on AMD processors
- Hide Hyper-V hypercalls that are not included in the guest CPUID
- Fixes for live migration of virtual machines that use the Hyper-V
"enlightened VMCS" optimization of nested virtualization
- Bugfixes (not many)
Generic:
- Support for retrieving statistics without debugfs
- Cleanups for the KVM selftests API"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (314 commits)
KVM: x86: rename apic_access_page_done to apic_access_memslot_enabled
kvm: x86: disable the narrow guest module parameter on unload
selftests: kvm: Allows userspace to handle emulation errors.
kvm: x86: Allow userspace to handle emulation errors
KVM: x86/mmu: Let guest use GBPAGES if supported in hardware and TDP is on
KVM: x86/mmu: Get CR4.SMEP from MMU, not vCPU, in shadow page fault
KVM: x86/mmu: Get CR0.WP from MMU, not vCPU, in shadow page fault
KVM: x86/mmu: Drop redundant rsvd bits reset for nested NPT
KVM: x86/mmu: Optimize and clean up so called "last nonleaf level" logic
KVM: x86: Enhance comments for MMU roles and nested transition trickiness
KVM: x86/mmu: WARN on any reserved SPTE value when making a valid SPTE
KVM: x86/mmu: Add helpers to do full reserved SPTE checks w/ generic MMU
KVM: x86/mmu: Use MMU's role to determine PTTYPE
KVM: x86/mmu: Collapse 32-bit PAE and 64-bit statements for helpers
KVM: x86/mmu: Add a helper to calculate root from role_regs
KVM: x86/mmu: Add helper to update paging metadata
KVM: x86/mmu: Don't update nested guest's paging bitmasks if CR0.PG=0
KVM: x86/mmu: Consolidate reset_rsvds_bits_mask() calls
KVM: x86/mmu: Use MMU role_regs to get LA57, and drop vCPU LA57 helper
KVM: x86/mmu: Get nested MMU's root level from the MMU's role
...
- Changes to core scheduling facilities:
- Add "Core Scheduling" via CONFIG_SCHED_CORE=y, which enables
coordinated scheduling across SMT siblings. This is a much
requested feature for cloud computing platforms, to allow
the flexible utilization of SMT siblings, without exposing
untrusted domains to information leaks & side channels, plus
to ensure more deterministic computing performance on SMT
systems used by heterogenous workloads.
There's new prctls to set core scheduling groups, which
allows more flexible management of workloads that can share
siblings.
- Fix task->state access anti-patterns that may result in missed
wakeups and rename it to ->__state in the process to catch new
abuses.
- Load-balancing changes:
- Tweak newidle_balance for fair-sched, to improve
'memcache'-like workloads.
- "Age" (decay) average idle time, to better track & improve workloads
such as 'tbench'.
- Fix & improve energy-aware (EAS) balancing logic & metrics.
- Fix & improve the uclamp metrics.
- Fix task migration (taskset) corner case on !CONFIG_CPUSET.
- Fix RT and deadline utilization tracking across policy changes
- Introduce a "burstable" CFS controller via cgroups, which allows
bursty CPU-bound workloads to borrow a bit against their future
quota to improve overall latencies & batching. Can be tweaked
via /sys/fs/cgroup/cpu/<X>/cpu.cfs_burst_us.
- Rework assymetric topology/capacity detection & handling.
- Scheduler statistics & tooling:
- Disable delayacct by default, but add a sysctl to enable
it at runtime if tooling needs it. Use static keys and
other optimizations to make it more palatable.
- Use sched_clock() in delayacct, instead of ktime_get_ns().
- Misc cleanups and fixes.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=3VDr
-----END PGP SIGNATURE-----
Merge tag 'sched-core-2021-06-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler udpates from Ingo Molnar:
- Changes to core scheduling facilities:
- Add "Core Scheduling" via CONFIG_SCHED_CORE=y, which enables
coordinated scheduling across SMT siblings. This is a much
requested feature for cloud computing platforms, to allow the
flexible utilization of SMT siblings, without exposing untrusted
domains to information leaks & side channels, plus to ensure more
deterministic computing performance on SMT systems used by
heterogenous workloads.
There are new prctls to set core scheduling groups, which allows
more flexible management of workloads that can share siblings.
- Fix task->state access anti-patterns that may result in missed
wakeups and rename it to ->__state in the process to catch new
abuses.
- Load-balancing changes:
- Tweak newidle_balance for fair-sched, to improve 'memcache'-like
workloads.
- "Age" (decay) average idle time, to better track & improve
workloads such as 'tbench'.
- Fix & improve energy-aware (EAS) balancing logic & metrics.
- Fix & improve the uclamp metrics.
- Fix task migration (taskset) corner case on !CONFIG_CPUSET.
- Fix RT and deadline utilization tracking across policy changes
- Introduce a "burstable" CFS controller via cgroups, which allows
bursty CPU-bound workloads to borrow a bit against their future
quota to improve overall latencies & batching. Can be tweaked via
/sys/fs/cgroup/cpu/<X>/cpu.cfs_burst_us.
- Rework assymetric topology/capacity detection & handling.
- Scheduler statistics & tooling:
- Disable delayacct by default, but add a sysctl to enable it at
runtime if tooling needs it. Use static keys and other
optimizations to make it more palatable.
- Use sched_clock() in delayacct, instead of ktime_get_ns().
- Misc cleanups and fixes.
* tag 'sched-core-2021-06-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (72 commits)
sched/doc: Update the CPU capacity asymmetry bits
sched/topology: Rework CPU capacity asymmetry detection
sched/core: Introduce SD_ASYM_CPUCAPACITY_FULL sched_domain flag
psi: Fix race between psi_trigger_create/destroy
sched/fair: Introduce the burstable CFS controller
sched/uclamp: Fix uclamp_tg_restrict()
sched/rt: Fix Deadline utilization tracking during policy change
sched/rt: Fix RT utilization tracking during policy change
sched: Change task_struct::state
sched,arch: Remove unused TASK_STATE offsets
sched,timer: Use __set_current_state()
sched: Add get_current_state()
sched,perf,kvm: Fix preemption condition
sched: Introduce task_is_running()
sched: Unbreak wakeups
sched/fair: Age the average idle time
sched/cpufreq: Consider reduced CPU capacity in energy calculation
sched/fair: Take thermal pressure into account while estimating energy
thermal/cpufreq_cooling: Update offline CPUs per-cpu thermal_pressure
sched/fair: Return early from update_tg_cfs_load() if delta == 0
...
To remove code duplication, use the binary stats descriptors in the
implementation of the debugfs interface for statistics. This unifies
the definition of statistics for the binary and debugfs interfaces.
Signed-off-by: Jing Zhang <jingzhangos@google.com>
Message-Id: <20210618222709.1858088-8-jingzhangos@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a VCPU ioctl to get a statistics file descriptor by which a read
functionality is provided for userspace to read out VCPU stats header,
descriptors and data.
Define VCPU statistics descriptors and header for all architectures.
Reviewed-by: David Matlack <dmatlack@google.com>
Reviewed-by: Ricardo Koller <ricarkol@google.com>
Reviewed-by: Krish Sadhukhan <krish.sadhukhan@oracle.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Tested-by: Fuad Tabba <tabba@google.com> #arm64
Signed-off-by: Jing Zhang <jingzhangos@google.com>
Message-Id: <20210618222709.1858088-5-jingzhangos@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a VM ioctl to get a statistics file descriptor by which a read
functionality is provided for userspace to read out VM stats header,
descriptors and data.
Define VM statistics descriptors and header for all architectures.
Reviewed-by: David Matlack <dmatlack@google.com>
Reviewed-by: Ricardo Koller <ricarkol@google.com>
Reviewed-by: Krish Sadhukhan <krish.sadhukhan@oracle.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Tested-by: Fuad Tabba <tabba@google.com> #arm64
Signed-off-by: Jing Zhang <jingzhangos@google.com>
Message-Id: <20210618222709.1858088-4-jingzhangos@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It's possible to create a region which maps valid but non-refcounted
pages (e.g., tail pages of non-compound higher order allocations). These
host pages can then be returned by gfn_to_page, gfn_to_pfn, etc., family
of APIs, which take a reference to the page, which takes it from 0 to 1.
When the reference is dropped, this will free the page incorrectly.
Fix this by only taking a reference on valid pages if it was non-zero,
which indicates it is participating in normal refcounting (and can be
released with put_page).
This addresses CVE-2021-22543.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Tested-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This commit defines the API for userspace and prepare the common
functionalities to support per VM/VCPU binary stats data readings.
The KVM stats now is only accessible by debugfs, which has some
shortcomings this change series are supposed to fix:
1. The current debugfs stats solution in KVM could be disabled
when kernel Lockdown mode is enabled, which is a potential
rick for production.
2. The current debugfs stats solution in KVM is organized as "one
stats per file", it is good for debugging, but not efficient
for production.
3. The stats read/clear in current debugfs solution in KVM are
protected by the global kvm_lock.
Besides that, there are some other benefits with this change:
1. All KVM VM/VCPU stats can be read out in a bulk by one copy
to userspace.
2. A schema is used to describe KVM statistics. From userspace's
perspective, the KVM statistics are self-describing.
3. With the fd-based solution, a separate telemetry would be able
to read KVM stats in a less privileged environment.
4. After the initial setup by reading in stats descriptors, a
telemetry only needs to read the stats data itself, no more
parsing or setup is needed.
Reviewed-by: David Matlack <dmatlack@google.com>
Reviewed-by: Ricardo Koller <ricarkol@google.com>
Reviewed-by: Krish Sadhukhan <krish.sadhukhan@oracle.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Tested-by: Fuad Tabba <tabba@google.com> #arm64
Signed-off-by: Jing Zhang <jingzhangos@google.com>
Message-Id: <20210618222709.1858088-3-jingzhangos@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Generic KVM stats are those collected in architecture independent code
or those supported by all architectures; put all generic statistics in
a separate structure. This ensures that they are defined the same way
in the statistics API which is being added, removing duplication among
different architectures in the declaration of the descriptors.
No functional change intended.
Reviewed-by: David Matlack <dmatlack@google.com>
Reviewed-by: Ricardo Koller <ricarkol@google.com>
Reviewed-by: Krish Sadhukhan <krish.sadhukhan@oracle.com>
Signed-off-by: Jing Zhang <jingzhangos@google.com>
Message-Id: <20210618222709.1858088-2-jingzhangos@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When ran from the sched-out path (preempt_notifier or perf_event),
p->state is irrelevant to determine preemption. You can get preempted
with !task_is_running() just fine.
The right indicator for preemption is if the task is still on the
runqueue in the sched-out path.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20210611082838.285099381@infradead.org
Add KVM PM-notifier so that architectures can have arch-specific
VM suspend/resume routines. Such architectures need to select
CONFIG_HAVE_KVM_PM_NOTIFIER and implement kvm_arch_pm_notifier().
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Acked-by: Marc Zyngier <maz@kernel.org>
Message-Id: <20210606021045.14159-1-senozhatsky@chromium.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a new lock to protect the arch-specific fields of memslots if they
need to be modified in a kvm->srcu read critical section. A future
commit will use this lock to lazily allocate memslot rmaps for x86.
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20210518173414.450044-5-bgardon@google.com>
[Add Documentation/ hunk. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Factor out copying kvm_memslots from allocating the memory for new ones
in preparation for adding a new lock to protect the arch-specific fields
of the memslots.
No functional change intended.
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20210518173414.450044-4-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For VMX, when a vcpu enters HLT emulation, pi_post_block will:
1) Add vcpu to per-cpu list of blocked vcpus.
2) Program the posted-interrupt descriptor "notification vector"
to POSTED_INTR_WAKEUP_VECTOR
With interrupt remapping, an interrupt will set the PIR bit for the
vector programmed for the device on the CPU, test-and-set the
ON bit on the posted interrupt descriptor, and if the ON bit is clear
generate an interrupt for the notification vector.
This way, the target CPU wakes upon a device interrupt and wakes up
the target vcpu.
Problem is that pi_post_block only programs the notification vector
if kvm_arch_has_assigned_device() is true. Its possible for the
following to happen:
1) vcpu V HLTs on pcpu P, kvm_arch_has_assigned_device is false,
notification vector is not programmed
2) device is assigned to VM
3) device interrupts vcpu V, sets ON bit
(notification vector not programmed, so pcpu P remains in idle)
4) vcpu 0 IPIs vcpu V (in guest), but since pi descriptor ON bit is set,
kvm_vcpu_kick is skipped
5) vcpu 0 busy spins on vcpu V's response for several seconds, until
RCU watchdog NMIs all vCPUs.
To fix this, use the start_assignment kvm_x86_ops callback to kick
vcpus out of the halt loop, so the notification vector is
properly reprogrammed to the wakeup vector.
Reported-by: Pei Zhang <pezhang@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Message-Id: <20210526172014.GA29007@fuller.cnet>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM_REQ_UNBLOCK will be used to exit a vcpu from
its inner vcpu halt emulation loop.
Rename KVM_REQ_PENDING_TIMER to KVM_REQ_UNBLOCK, switch
PowerPC to arch specific request bit.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Message-Id: <20210525134321.303768132@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is inspired by commit 262de4102c (kvm: exit halt polling on
need_resched() as well). Due to PPC implements an arch specific halt
polling logic, we have to the need_resched() check there as well. This
patch adds a helper function that can be shared between book3s and generic
halt-polling loops.
Reviewed-by: David Matlack <dmatlack@google.com>
Reviewed-by: Venkatesh Srinivas <venkateshs@chromium.org>
Cc: Ben Segall <bsegall@google.com>
Cc: Venkatesh Srinivas <venkateshs@chromium.org>
Cc: Jim Mattson <jmattson@google.com>
Cc: David Matlack <dmatlack@google.com>
Cc: Paul Mackerras <paulus@ozlabs.org>
Cc: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Message-Id: <1621339235-11131-1-git-send-email-wanpengli@tencent.com>
[Make the function inline. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Fix regression with irqbypass not restarting the guest on failed connect
- Fix regression with debug register decoding resulting in overlapping access
- Commit exception state on exit to usrspace
- Fix the MMU notifier return values
- Add missing 'static' qualifiers in the new host stage-2 code
-----BEGIN PGP SIGNATURE-----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=57tg
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-fixes-5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 5.13, take #1
- Fix regression with irqbypass not restarting the guest on failed connect
- Fix regression with debug register decoding resulting in overlapping access
- Commit exception state on exit to usrspace
- Fix the MMU notifier return values
- Add missing 'static' qualifiers in the new host stage-2 code
This reverts commit a979a6aa00.
The reverted commit may cause VM freeze on arm64 with GICv4,
where stopping a consumer is implemented by suspending the VM.
Should the connect fail, the VM will not be resumed, which
is a bit of a problem.
It also erroneously calls the producer destructor unconditionally,
which is unexpected.
Reported-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Suggested-by: Marc Zyngier <maz@kernel.org>
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com>
[maz: tags and cc-stable, commit message update]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Fixes: a979a6aa00 ("irqbypass: do not start cons/prod when failed connect")
Link: https://lore.kernel.org/r/3a2c66d6-6ca0-8478-d24b-61e8e3241b20@hisilicon.com
Link: https://lore.kernel.org/r/20210508071152.722425-1-lingshan.zhu@intel.com
Cc: stable@vger.kernel.org
When growing halt-polling, there is no check that the poll time exceeds
the per-VM limit. It's possible for vcpu->halt_poll_ns to grow past
kvm->max_halt_poll_ns and stay there until a halt which takes longer
than kvm->halt_poll_ns.
Signed-off-by: David Matlack <dmatlack@google.com>
Signed-off-by: Venkatesh Srinivas <venkateshs@chromium.org>
Message-Id: <20210506152442.4010298-1-venkateshs@chromium.org>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
single_task_running() is usually more general than need_resched()
but CFS_BANDWIDTH throttling will use resched_task() when there
is just one task to get the task to block. This was causing
long-need_resched warnings and was likely allowing VMs to
overrun their quota when halt polling.
Signed-off-by: Ben Segall <bsegall@google.com>
Signed-off-by: Venkatesh Srinivas <venkateshs@chromium.org>
Message-Id: <20210429162233.116849-1-venkateshs@chromium.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: stable@vger.kernel.org
Reviewed-by: Jim Mattson <jmattson@google.com>
Both lock holder vCPU and IPI receiver that has halted are condidate for
boost. However, the PLE handler was originally designed to deal with the
lock holder preemption problem. The Intel PLE occurs when the spinlock
waiter is in kernel mode. This assumption doesn't hold for IPI receiver,
they can be in either kernel or user mode. the vCPU candidate in user mode
will not be boosted even if they should respond to IPIs. Some benchmarks
like pbzip2, swaptions etc do the TLB shootdown in kernel mode and most
of the time they are running in user mode. It can lead to a large number
of continuous PLE events because the IPI sender causes PLE events
repeatedly until the receiver is scheduled while the receiver is not
candidate for a boost.
This patch boosts the vCPU candidiate in user mode which is delivery
interrupt. We can observe the speed of pbzip2 improves 10% in 96 vCPUs
VM in over-subscribe scenario (The host machine is 2 socket, 48 cores,
96 HTs Intel CLX box). There is no performance regression for other
benchmarks like Unixbench spawn (most of the time contend read/write
lock in kernel mode), ebizzy (most of the time contend read/write sem
and TLB shoodtdown in kernel mode).
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Message-Id: <1618542490-14756-1-git-send-email-wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a capability for userspace to mirror SEV encryption context from
one vm to another. On our side, this is intended to support a
Migration Helper vCPU, but it can also be used generically to support
other in-guest workloads scheduled by the host. The intention is for
the primary guest and the mirror to have nearly identical memslots.
The primary benefits of this are that:
1) The VMs do not share KVM contexts (think APIC/MSRs/etc), so they
can't accidentally clobber each other.
2) The VMs can have different memory-views, which is necessary for post-copy
migration (the migration vCPUs on the target need to read and write to
pages, when the primary guest would VMEXIT).
This does not change the threat model for AMD SEV. Any memory involved
is still owned by the primary guest and its initial state is still
attested to through the normal SEV_LAUNCH_* flows. If userspace wanted
to circumvent SEV, they could achieve the same effect by simply attaching
a vCPU to the primary VM.
This patch deliberately leaves userspace in charge of the memslots for the
mirror, as it already has the power to mess with them in the primary guest.
This patch does not support SEV-ES (much less SNP), as it does not
handle handing off attested VMSAs to the mirror.
For additional context, we need a Migration Helper because SEV PSP
migration is far too slow for our live migration on its own. Using
an in-guest migrator lets us speed this up significantly.
Signed-off-by: Nathan Tempelman <natet@google.com>
Message-Id: <20210408223214.2582277-1-natet@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
